| /* |
| * Device Tree Source for the Marzen board |
| * |
| * Copyright (C) 2013 Renesas Solutions Corp. |
| * Copyright (C) 2013 Simon Horman |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| /dts-v1/; |
| #include "r8a7779.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| model = "marzen"; |
| compatible = "renesas,marzen", "renesas,r8a7779"; |
| |
| aliases { |
| serial0 = &scif2; |
| serial1 = &scif4; |
| }; |
| |
| chosen { |
| bootargs = "ignore_loglevel root=/dev/nfs ip=on"; |
| stdout-path = &scif2; |
| }; |
| |
| memory@60000000 { |
| device_type = "memory"; |
| reg = <0x60000000 0x40000000>; |
| }; |
| |
| fixedregulator3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ethernet@18000000 { |
| compatible = "smsc,lan9220", "smsc,lan9115"; |
| reg = <0x18000000 0x100>; |
| pinctrl-0 = <ðernet_pins>; |
| pinctrl-names = "default"; |
| |
| phy-mode = "mii"; |
| interrupt-parent = <&irqpin0>; |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| smsc,irq-push-pull; |
| reg-io-width = <4>; |
| vddvario-supply = <&fixedregulator3v3>; |
| vdd33a-supply = <&fixedregulator3v3>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led2 { |
| gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| }; |
| led3 { |
| gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; |
| }; |
| led4 { |
| gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| vga-encoder { |
| compatible = "adi,adv7123"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| vga_enc_in: endpoint { |
| remote-endpoint = <&du_out_rgb0>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| vga_enc_out: endpoint { |
| remote-endpoint = <&vga_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| vga { |
| compatible = "vga-connector"; |
| |
| port { |
| vga_in: endpoint { |
| remote-endpoint = <&vga_enc_out>; |
| }; |
| }; |
| }; |
| |
| lvds-encoder { |
| compatible = "thine,thc63lvdm83d"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| lvds_enc_in: endpoint { |
| remote-endpoint = <&du_out_rgb1>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| lvds_connector: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| x3_clk: x3-clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <65000000>; |
| }; |
| }; |
| |
| &du { |
| pinctrl-0 = <&du_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; |
| clock-names = "du", "dclkin.0"; |
| |
| ports { |
| port@0 { |
| endpoint { |
| remote-endpoint = <&vga_enc_in>; |
| }; |
| }; |
| port@1 { |
| endpoint { |
| remote-endpoint = <&lvds_enc_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &irqpin0 { |
| status = "okay"; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <31250000>; |
| }; |
| |
| &tmu0 { |
| status = "okay"; |
| }; |
| |
| &pfc { |
| pinctrl-0 = <&scif_clk_pins>; |
| pinctrl-names = "default"; |
| |
| du_pins: du { |
| du0 { |
| groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; |
| function = "du0"; |
| }; |
| du1 { |
| groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; |
| function = "du1"; |
| }; |
| }; |
| |
| scif_clk_pins: scif_clk { |
| groups = "scif_clk_b"; |
| function = "scif_clk"; |
| }; |
| |
| ethernet_pins: ethernet { |
| intc { |
| groups = "intc_irq1_b"; |
| function = "intc"; |
| }; |
| lbsc { |
| groups = "lbsc_ex_cs0"; |
| function = "lbsc"; |
| }; |
| }; |
| |
| scif2_pins: serial2 { |
| groups = "scif2_data_c"; |
| function = "scif2"; |
| }; |
| |
| scif4_pins: serial4 { |
| groups = "scif4_data"; |
| function = "scif4"; |
| }; |
| |
| sdhi0_pins: sd0 { |
| groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; |
| function = "sdhi0"; |
| }; |
| |
| hspi0_pins: hspi0 { |
| groups = "hspi0"; |
| function = "hspi0"; |
| }; |
| }; |
| |
| &scif2 { |
| pinctrl-0 = <&scif2_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &scif4 { |
| pinctrl-0 = <&scif4_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &scif_clk { |
| clock-frequency = <14745600>; |
| status = "okay"; |
| }; |
| |
| &sdhi0 { |
| pinctrl-0 = <&sdhi0_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <&fixedregulator3v3>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &hspi0 { |
| pinctrl-0 = <&hspi0_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |