drivers/uwb/i1480/dfu/usb.c - kernel/msm-4.19 - Gitiles

 /*
  * Intel Wireless UWB Link 1480
  * USB SKU firmware upload implementation
  *
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version
  * 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  * 02110-1301, USA.
  *
  *
  * This driver will prepare the i1480 device to behave as a real
  * Wireless USB HWA adaptor by uploading the firmware.
  *
  * When the device is connected or driver is loaded, i1480_usb_probe()
  * is called--this will allocate and initialize the device structure,
  * fill in the pointers to the common functions (read, write,
  * wait_init_done and cmd for HWA command execution) and once that is
  * done, call the common firmware uploading routine. Then clean up and
  * return -ENODEV, as we don't attach to the device.
  *
  * The rest are the basic ops we implement that the fw upload code
  * uses to do its job. All the ops in the common code are i1480->NAME,
  * the functions are i1480_usb_NAME().
  */
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/uwb.h>
 #include <linux/usb/wusb.h>
 #include <linux/usb/wusb-wa.h>
 #include "i1480-dfu.h"

 struct i1480_usb {
 	struct i1480 i1480;
 	struct usb_device *usb_dev;
 	struct usb_interface *usb_iface;
 	struct urb *neep_urb;	/* URB for reading from EP1 */
 };


 static
 void i1480_usb_init(struct i1480_usb *i1480_usb)
 {
 	i1480_init(&i1480_usb->i1480);
 }


 static
 int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
 {
 	struct usb_device *usb_dev = interface_to_usbdev(iface);
 	int result = -ENOMEM;

 	i1480_usb->usb_dev = usb_get_dev(usb_dev);	/* bind the USB device */
 	i1480_usb->usb_iface = usb_get_intf(iface);
 	usb_set_intfdata(iface, i1480_usb);		/* Bind the driver to iface0 */
 	i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (i1480_usb->neep_urb == NULL)
 		goto error;
 	return 0;

 error:
 	usb_set_intfdata(iface, NULL);
 	usb_put_intf(iface);
 	usb_put_dev(usb_dev);
 	return result;
 }


 static
 void i1480_usb_destroy(struct i1480_usb *i1480_usb)
 {
 	usb_kill_urb(i1480_usb->neep_urb);
 	usb_free_urb(i1480_usb->neep_urb);
 	usb_set_intfdata(i1480_usb->usb_iface, NULL);
 	usb_put_intf(i1480_usb->usb_iface);
 	usb_put_dev(i1480_usb->usb_dev);
 }


 /**
  * Write a buffer to a memory address in the i1480 device
  *
  * @i1480:  i1480 instance
  * @memory_address:
  *          Address where to write the data buffer to.
  * @buffer: Buffer to the data
  * @size:   Size of the buffer [has to be < 512].
  * @returns: 0 if ok, < 0 errno code on error.
  *
  * Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
  * so we copy it to the local i1480 buffer before proceeding. In any
  * case, we have a max size we can send.
  */
 static
 int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
 		    const void *buffer, size_t size)
 {
 	int result = 0;
 	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
 	size_t buffer_size, itr = 0;

 	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
 	while (size > 0) {
 		buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
 		memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
 		result = usb_control_msg(
 			i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
 			0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			memory_address,	(memory_address >> 16),
 			i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
 		if (result < 0)
 			break;
 		itr += result;
 		memory_address += result;
 		size -= result;
 	}
 	return result;
 }


 /**
  * Read a block [max size 512] of the device's memory to @i1480's buffer.
  *
  * @i1480: i1480 instance
  * @memory_address:
  *         Address where to read from.
  * @size:  Size to read. Smaller than or equal to 512.
  * @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
  *
  * NOTE: if the memory address or block is incorrect, you might get a
  *       stall or a different memory read. Caller has to verify the
  *       memory address and size passed back in the @neh structure.
  */
 static
 int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
 {
 	ssize_t result = 0, bytes = 0;
 	size_t itr, read_size = i1480->buf_size;
 	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);

 	BUG_ON(size > i1480->buf_size);
 	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
 	BUG_ON(read_size > 512);

 	if (addr >= 0x8000d200 && addr < 0x8000d400)	/* Yeah, HW quirk */
 		read_size = 4;

 	for (itr = 0; itr < size; itr += read_size) {
 		size_t itr_addr = addr + itr;
 		size_t itr_size = min(read_size, size - itr);
 		result = usb_control_msg(
 			i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
 			0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			itr_addr, (itr_addr >> 16),
 			i1480->cmd_buf + itr, itr_size,
 			100 /* FIXME: arbitrary */);
 		if (result < 0) {
 			dev_err(i1480->dev, "%s: USB read error: %zd\n",
 				__func__, result);
 			goto out;
 		}
 		if (result != itr_size) {
 			result = -EIO;
 			dev_err(i1480->dev,
 				"%s: partial read got only %zu bytes vs %zu expected\n",
 				__func__, result, itr_size);
 			goto out;
 		}
 		bytes += result;
 	}
 	result = bytes;
 out:
 	return result;
 }


 /**
  * Callback for reads on the notification/event endpoint
  *
  * Just enables the completion read handler.
  */
 static
 void i1480_usb_neep_cb(struct urb *urb)
 {
 	struct i1480 *i1480 = urb->context;
 	struct device *dev = i1480->dev;

 	switch (urb->status) {
 	case 0:
 		break;
 	case -ECONNRESET:	/* Not an error, but a controlled situation; */
 	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
 		dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
 		break;
 	case -ESHUTDOWN:	/* going away! */
 		dev_dbg(dev, "NEEP: down %d\n", urb->status);
 		break;
 	default:
 		dev_err(dev, "NEEP: unknown status %d\n", urb->status);
 		break;
 	}
 	i1480->evt_result = urb->actual_length;
 	complete(&i1480->evt_complete);
 	return;
 }


 /**
  * Wait for the MAC FW to initialize
  *
  * MAC FW sends a 0xfd/0101/00 notification to EP1 when done
  * initializing. Get that notification into i1480->evt_buf; upper layer
  * will verify it.
  *
  * Set i1480->evt_result with the result of getting the event or its
  * size (if successful).
  *
  * Delivers the data directly to i1480->evt_buf
  */
 static
 int i1480_usb_wait_init_done(struct i1480 *i1480)
 {
 	int result;
 	struct device *dev = i1480->dev;
 	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
 	struct usb_endpoint_descriptor *epd;

 	init_completion(&i1480->evt_complete);
 	i1480->evt_result = -EINPROGRESS;
 	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
 			 usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
 			 i1480->evt_buf, i1480->buf_size,
 			 i1480_usb_neep_cb, i1480, epd->bInterval);
 	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
 	if (result < 0) {
 		dev_err(dev, "init done: cannot submit NEEP read: %d\n",
 			result);
 		goto error_submit;
 	}
 	/* Wait for the USB callback to get the data */
 	result = wait_for_completion_interruptible_timeout(
 		&i1480->evt_complete, HZ);
 	if (result <= 0) {
 		result = result == 0 ? -ETIMEDOUT : result;
 		goto error_wait;
 	}
 	usb_kill_urb(i1480_usb->neep_urb);
 	return 0;

 error_wait:
 	usb_kill_urb(i1480_usb->neep_urb);
 error_submit:
 	i1480->evt_result = result;
 	return result;
 }


 /**
  * Generic function for issuing commands to the i1480
  *
  * @i1480:      i1480 instance
  * @cmd_name:   Name of the command (for error messages)
  * @cmd:        Pointer to command buffer
  * @cmd_size:   Size of the command buffer
  * @reply:      Buffer for the reply event
  * @reply_size: Expected size back (including RCEB); the reply buffer
  *              is assumed to be as big as this.
  * @returns:    >= 0 size of the returned event data if ok,
  *              < 0 errno code on error.
  *
  * Arms the NE handle, issues the command to the device and checks the
  * basics of the reply event.
  */
 static
 int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
 {
 	int result;
 	struct device *dev = i1480->dev;
 	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
 	struct usb_endpoint_descriptor *epd;
 	struct uwb_rccb *cmd = i1480->cmd_buf;
 	u8 iface_no;

 	/* Post a read on the notification & event endpoint */
 	iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
 	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(
 		i1480_usb->neep_urb, i1480_usb->usb_dev,
 		usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
 		i1480->evt_buf, i1480->buf_size,
 		i1480_usb_neep_cb, i1480, epd->bInterval);
 	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
 	if (result < 0) {
 		dev_err(dev, "%s: cannot submit NEEP read: %d\n",
 			cmd_name, result);
 			goto error_submit_ep1;
 	}
 	/* Now post the command on EP0 */
 	result = usb_control_msg(
 		i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
 		WA_EXEC_RC_CMD,
 		USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 		0, iface_no,
 		cmd, cmd_size,
 		100 /* FIXME: this is totally arbitrary */);
 	if (result < 0) {
 		dev_err(dev, "%s: control request failed: %d\n",
 			cmd_name, result);
 		goto error_submit_ep0;
 	}
 	return result;

 error_submit_ep0:
 	usb_kill_urb(i1480_usb->neep_urb);
 error_submit_ep1:
 	return result;
 }


 /*
  * Probe a i1480 device for uploading firmware.
  *
  * We attach only to interface #0, which is the radio control interface.
  */
 static
 int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
 {
 	struct i1480_usb *i1480_usb;
 	struct i1480 *i1480;
 	struct device *dev = &iface->dev;
 	int result;

 	result = -ENODEV;
 	if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
 		dev_dbg(dev, "not attaching to iface %d\n",
 			iface->cur_altsetting->desc.bInterfaceNumber);
 		goto error;
 	}
 	if (iface->num_altsetting > 1
 	    && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
 		/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
 		result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
 		if (result < 0)
 			dev_warn(dev,
 				 "can't set altsetting 1 on iface 0: %d\n",
 				 result);
 	}

 	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
 		return -ENODEV;

 	result = -ENOMEM;
 	i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
 	if (i1480_usb == NULL) {
 		dev_err(dev, "Unable to allocate instance\n");
 		goto error;
 	}
 	i1480_usb_init(i1480_usb);

 	i1480 = &i1480_usb->i1480;
 	i1480->buf_size = 512;
 	i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL);
 	if (i1480->cmd_buf == NULL) {
 		dev_err(dev, "Cannot allocate transfer buffers\n");
 		result = -ENOMEM;
 		goto error_buf_alloc;
 	}
 	i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;

 	result = i1480_usb_create(i1480_usb, iface);
 	if (result < 0) {
 		dev_err(dev, "Cannot create instance: %d\n", result);
 		goto error_create;
 	}

 	/* setup the fops and upload the firmware */
 	i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
 	i1480->mac_fw_name = "i1480-usb-0.0.bin";
 	i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
 	i1480->phy_fw_name = "i1480-phy-0.0.bin";
 	i1480->dev = &iface->dev;
 	i1480->write = i1480_usb_write;
 	i1480->read = i1480_usb_read;
 	i1480->rc_setup = NULL;
 	i1480->wait_init_done = i1480_usb_wait_init_done;
 	i1480->cmd = i1480_usb_cmd;

 	result = i1480_fw_upload(&i1480_usb->i1480);	/* the real thing */
 	if (result >= 0) {
 		usb_reset_device(i1480_usb->usb_dev);
 		result = -ENODEV;	/* we don't want to bind to the iface */
 	}
 	i1480_usb_destroy(i1480_usb);
 error_create:
 	kfree(i1480->cmd_buf);
 error_buf_alloc:
 	kfree(i1480_usb);
 error:
 	return result;
 }

 MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
 MODULE_FIRMWARE("i1480-usb-0.0.bin");
 MODULE_FIRMWARE("i1480-phy-0.0.bin");

 #define i1480_USB_DEV(v, p)				\
 {							\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE	\
 		 | USB_DEVICE_ID_MATCH_DEV_INFO		\
 		 | USB_DEVICE_ID_MATCH_INT_INFO,	\
 	.idVendor = (v),				\
 	.idProduct = (p),				\
 	.bDeviceClass = 0xff,				\
 	.bDeviceSubClass = 0xff,			\
 	.bDeviceProtocol = 0xff,			\
 	.bInterfaceClass = 0xff,			\
 	.bInterfaceSubClass = 0xff,			\
 	.bInterfaceProtocol = 0xff,			\
 }


 /** USB device ID's that we handle */
 static const struct usb_device_id i1480_usb_id_table[] = {
 	i1480_USB_DEV(0x8086, 0xdf3b),
 	i1480_USB_DEV(0x15a9, 0x0005),
 	i1480_USB_DEV(0x07d1, 0x3802),
 	i1480_USB_DEV(0x050d, 0x305a),
 	i1480_USB_DEV(0x3495, 0x3007),
 	{},
 };
 MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);


 static struct usb_driver i1480_dfu_driver = {
 	.name =		"i1480-dfu-usb",
 	.id_table =	i1480_usb_id_table,
 	.probe =	i1480_usb_probe,
 	.disconnect =	NULL,
 };

 module_usb_driver(i1480_dfu_driver);

 MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
 MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
 MODULE_LICENSE("GPL");
	/*
	* Intel Wireless UWB Link 1480
	* USB SKU firmware upload implementation
	*
	* Copyright (C) 2005-2006 Intel Corporation
	* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License version
	* 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
	* 02110-1301, USA.
	*
	*
	* This driver will prepare the i1480 device to behave as a real
	* Wireless USB HWA adaptor by uploading the firmware.
	*
	* When the device is connected or driver is loaded, i1480_usb_probe()
	* is called--this will allocate and initialize the device structure,
	* fill in the pointers to the common functions (read, write,
	* wait_init_done and cmd for HWA command execution) and once that is
	* done, call the common firmware uploading routine. Then clean up and
	* return -ENODEV, as we don't attach to the device.
	*
	* The rest are the basic ops we implement that the fw upload code
	* uses to do its job. All the ops in the common code are i1480->NAME,
	* the functions are i1480_usb_NAME().
	*/
	#include <linux/module.h>
	#include <linux/usb.h>
	#include <linux/interrupt.h>
	#include <linux/slab.h>
	#include <linux/delay.h>
	#include <linux/uwb.h>
	#include <linux/usb/wusb.h>
	#include <linux/usb/wusb-wa.h>
	#include "i1480-dfu.h"

	struct i1480_usb {
	struct i1480 i1480;
	struct usb_device *usb_dev;
	struct usb_interface *usb_iface;
	struct urb neep_urb; / URB for reading from EP1 */
	};


	static
	void i1480_usb_init(struct i1480_usb *i1480_usb)
	{
	i1480_init(&i1480_usb->i1480);
	}


	static
	int i1480_usb_create(struct i1480_usb i1480_usb, struct usb_interface iface)
	{
	struct usb_device *usb_dev = interface_to_usbdev(iface);
	int result = -ENOMEM;

	i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
	i1480_usb->usb_iface = usb_get_intf(iface);
	usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */
	i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
	if (i1480_usb->neep_urb == NULL)
	goto error;
	return 0;

	error:
	usb_set_intfdata(iface, NULL);
	usb_put_intf(iface);
	usb_put_dev(usb_dev);
	return result;
	}


	static
	void i1480_usb_destroy(struct i1480_usb *i1480_usb)
	{
	usb_kill_urb(i1480_usb->neep_urb);
	usb_free_urb(i1480_usb->neep_urb);
	usb_set_intfdata(i1480_usb->usb_iface, NULL);
	usb_put_intf(i1480_usb->usb_iface);
	usb_put_dev(i1480_usb->usb_dev);
	}


	/**
	* Write a buffer to a memory address in the i1480 device
	*
	* @i1480: i1480 instance
	* @memory_address:
	* Address where to write the data buffer to.
	* @buffer: Buffer to the data
	* @size: Size of the buffer [has to be < 512].
	* @returns: 0 if ok, < 0 errno code on error.
	*
	* Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
	* so we copy it to the local i1480 buffer before proceeding. In any
	* case, we have a max size we can send.
	*/
	static
	int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
	const void *buffer, size_t size)
	{
	int result = 0;
	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
	size_t buffer_size, itr = 0;

	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
	while (size > 0) {
	buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
	memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
	result = usb_control_msg(
	i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
	0xf0, USB_DIR_OUT \| USB_TYPE_VENDOR \| USB_RECIP_DEVICE,
	memory_address, (memory_address >> 16),
	i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
	if (result < 0)
	break;
	itr += result;
	memory_address += result;
	size -= result;
	}
	return result;
	}


	/**
	* Read a block [max size 512] of the device's memory to @i1480's buffer.
	*
	* @i1480: i1480 instance
	* @memory_address:
	* Address where to read from.
	* @size: Size to read. Smaller than or equal to 512.
	* @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
	*
	* NOTE: if the memory address or block is incorrect, you might get a
	* stall or a different memory read. Caller has to verify the
	* memory address and size passed back in the @neh structure.
	*/
	static
	int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
	{
	ssize_t result = 0, bytes = 0;
	size_t itr, read_size = i1480->buf_size;
	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);

	BUG_ON(size > i1480->buf_size);
	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
	BUG_ON(read_size > 512);

	if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */
	read_size = 4;

	for (itr = 0; itr < size; itr += read_size) {
	size_t itr_addr = addr + itr;
	size_t itr_size = min(read_size, size - itr);
	result = usb_control_msg(
	i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
	0xf0, USB_DIR_IN \| USB_TYPE_VENDOR \| USB_RECIP_DEVICE,
	itr_addr, (itr_addr >> 16),
	i1480->cmd_buf + itr, itr_size,
	100 /* FIXME: arbitrary */);
	if (result < 0) {
	dev_err(i1480->dev, "%s: USB read error: %zd\n",
	__func__, result);
	goto out;
	}
	if (result != itr_size) {
	result = -EIO;
	dev_err(i1480->dev,
	"%s: partial read got only %zu bytes vs %zu expected\n",
	__func__, result, itr_size);
	goto out;
	}
	bytes += result;
	}
	result = bytes;
	out:
	return result;
	}


	/**
	* Callback for reads on the notification/event endpoint
	*
	* Just enables the completion read handler.
	*/
	static
	void i1480_usb_neep_cb(struct urb *urb)
	{
	struct i1480 *i1480 = urb->context;
	struct device *dev = i1480->dev;

	switch (urb->status) {
	case 0:
	break;
	case -ECONNRESET: /* Not an error, but a controlled situation; */
	case -ENOENT: /* (we killed the URB)...so, no broadcast */
	dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
	break;
	case -ESHUTDOWN: /* going away! */
	dev_dbg(dev, "NEEP: down %d\n", urb->status);
	break;
	default:
	dev_err(dev, "NEEP: unknown status %d\n", urb->status);
	break;
	}
	i1480->evt_result = urb->actual_length;
	complete(&i1480->evt_complete);
	return;
	}


	/**
	* Wait for the MAC FW to initialize
	*
	* MAC FW sends a 0xfd/0101/00 notification to EP1 when done
	* initializing. Get that notification into i1480->evt_buf; upper layer
	* will verify it.
	*
	* Set i1480->evt_result with the result of getting the event or its
	* size (if successful).
	*
	* Delivers the data directly to i1480->evt_buf
	*/
	static
	int i1480_usb_wait_init_done(struct i1480 *i1480)
	{
	int result;
	struct device *dev = i1480->dev;
	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
	struct usb_endpoint_descriptor *epd;

	init_completion(&i1480->evt_complete);
	i1480->evt_result = -EINPROGRESS;
	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
	usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
	usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
	i1480->evt_buf, i1480->buf_size,
	i1480_usb_neep_cb, i1480, epd->bInterval);
	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
	if (result < 0) {
	dev_err(dev, "init done: cannot submit NEEP read: %d\n",
	result);
	goto error_submit;
	}
	/* Wait for the USB callback to get the data */
	result = wait_for_completion_interruptible_timeout(
	&i1480->evt_complete, HZ);
	if (result <= 0) {
	result = result == 0 ? -ETIMEDOUT : result;
	goto error_wait;
	}
	usb_kill_urb(i1480_usb->neep_urb);
	return 0;

	error_wait:
	usb_kill_urb(i1480_usb->neep_urb);
	error_submit:
	i1480->evt_result = result;
	return result;
	}


	/**
	* Generic function for issuing commands to the i1480
	*
	* @i1480: i1480 instance
	* @cmd_name: Name of the command (for error messages)
	* @cmd: Pointer to command buffer
	* @cmd_size: Size of the command buffer
	* @reply: Buffer for the reply event
	* @reply_size: Expected size back (including RCEB); the reply buffer
	* is assumed to be as big as this.
	* @returns: >= 0 size of the returned event data if ok,
	* < 0 errno code on error.
	*
	* Arms the NE handle, issues the command to the device and checks the
	* basics of the reply event.
	*/
	static
	int i1480_usb_cmd(struct i1480 i1480, const char cmd_name, size_t cmd_size)
	{
	int result;
	struct device *dev = i1480->dev;
	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
	struct usb_endpoint_descriptor *epd;
	struct uwb_rccb *cmd = i1480->cmd_buf;
	u8 iface_no;

	/* Post a read on the notification & event endpoint */
	iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
	usb_fill_int_urb(
	i1480_usb->neep_urb, i1480_usb->usb_dev,
	usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
	i1480->evt_buf, i1480->buf_size,
	i1480_usb_neep_cb, i1480, epd->bInterval);
	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
	if (result < 0) {
	dev_err(dev, "%s: cannot submit NEEP read: %d\n",
	cmd_name, result);
	goto error_submit_ep1;
	}
	/* Now post the command on EP0 */
	result = usb_control_msg(
	i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
	WA_EXEC_RC_CMD,
	USB_DIR_OUT \| USB_RECIP_INTERFACE \| USB_TYPE_CLASS,
	0, iface_no,
	cmd, cmd_size,
	100 /* FIXME: this is totally arbitrary */);
	if (result < 0) {
	dev_err(dev, "%s: control request failed: %d\n",
	cmd_name, result);
	goto error_submit_ep0;
	}
	return result;

	error_submit_ep0:
	usb_kill_urb(i1480_usb->neep_urb);
	error_submit_ep1:
	return result;
	}


	/*
	* Probe a i1480 device for uploading firmware.
	*
	* We attach only to interface #0, which is the radio control interface.
	*/
	static
	int i1480_usb_probe(struct usb_interface iface, const struct usb_device_id id)
	{
	struct i1480_usb *i1480_usb;
	struct i1480 *i1480;
	struct device *dev = &iface->dev;
	int result;

	result = -ENODEV;
	if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
	dev_dbg(dev, "not attaching to iface %d\n",
	iface->cur_altsetting->desc.bInterfaceNumber);
	goto error;
	}
	if (iface->num_altsetting > 1
	&& interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
	/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
	result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
	if (result < 0)
	dev_warn(dev,
	"can't set altsetting 1 on iface 0: %d\n",
	result);
	}

	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
	return -ENODEV;

	result = -ENOMEM;
	i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
	if (i1480_usb == NULL) {
	dev_err(dev, "Unable to allocate instance\n");
	goto error;
	}
	i1480_usb_init(i1480_usb);

	i1480 = &i1480_usb->i1480;
	i1480->buf_size = 512;
	i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL);
	if (i1480->cmd_buf == NULL) {
	dev_err(dev, "Cannot allocate transfer buffers\n");
	result = -ENOMEM;
	goto error_buf_alloc;
	}
	i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;

	result = i1480_usb_create(i1480_usb, iface);
	if (result < 0) {
	dev_err(dev, "Cannot create instance: %d\n", result);
	goto error_create;
	}

	/* setup the fops and upload the firmware */
	i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
	i1480->mac_fw_name = "i1480-usb-0.0.bin";
	i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
	i1480->phy_fw_name = "i1480-phy-0.0.bin";
	i1480->dev = &iface->dev;
	i1480->write = i1480_usb_write;
	i1480->read = i1480_usb_read;
	i1480->rc_setup = NULL;
	i1480->wait_init_done = i1480_usb_wait_init_done;
	i1480->cmd = i1480_usb_cmd;

	result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */
	if (result >= 0) {
	usb_reset_device(i1480_usb->usb_dev);
	result = -ENODEV; /* we don't want to bind to the iface */
	}
	i1480_usb_destroy(i1480_usb);
	error_create:
	kfree(i1480->cmd_buf);
	error_buf_alloc:
	kfree(i1480_usb);
	error:
	return result;
	}

	MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
	MODULE_FIRMWARE("i1480-usb-0.0.bin");
	MODULE_FIRMWARE("i1480-phy-0.0.bin");

	#define i1480_USB_DEV(v, p) \
	{ \
	.match_flags = USB_DEVICE_ID_MATCH_DEVICE \
	\| USB_DEVICE_ID_MATCH_DEV_INFO \
	\| USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (v), \
	.idProduct = (p), \
	.bDeviceClass = 0xff, \
	.bDeviceSubClass = 0xff, \
	.bDeviceProtocol = 0xff, \
	.bInterfaceClass = 0xff, \
	.bInterfaceSubClass = 0xff, \
	.bInterfaceProtocol = 0xff, \
	}


	/** USB device ID's that we handle */
	static const struct usb_device_id i1480_usb_id_table[] = {
	i1480_USB_DEV(0x8086, 0xdf3b),
	i1480_USB_DEV(0x15a9, 0x0005),
	i1480_USB_DEV(0x07d1, 0x3802),
	i1480_USB_DEV(0x050d, 0x305a),
	i1480_USB_DEV(0x3495, 0x3007),
	{},
	};
	MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);


	static struct usb_driver i1480_dfu_driver = {
	.name = "i1480-dfu-usb",
	.id_table = i1480_usb_id_table,
	.probe = i1480_usb_probe,
	.disconnect = NULL,
	};

	module_usb_driver(i1480_dfu_driver);

	MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
	MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
	MODULE_LICENSE("GPL");