clk: ti: dpll: convert DPLL support code to use clk_hw instead of clk ptrs
Convert DPLL support code to use clk_hw pointers for reference and bypass
clocks. This allows us to use clk_hw_* APIs for accessing any required
parameters for these clocks, avoiding some locking problems at least with
DPLL enable code; this used clk_get_rate which uses mutex but isn't
good under clk_enable / clk_disable.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index b336a8c..6411e13 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -140,11 +140,9 @@
struct dpll_data *ad = clk_hw->dpll_data;
struct clk *clk;
- ad->clk_ref = of_clk_get(node, 0);
- ad->clk_bypass = of_clk_get(node, 1);
-
- if (IS_ERR(ad->clk_ref) || IS_ERR(ad->clk_bypass)) {
- pr_debug("clk-ref or clk-bypass for %s not ready, retry\n",
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_debug("clk-ref for %s not ready, retry\n",
node->name);
if (!ti_clk_retry_init(node, hw, omap_clk_register_apll))
return;
@@ -152,6 +150,20 @@
goto cleanup;
}
+ ad->clk_ref = __clk_get_hw(clk);
+
+ clk = of_clk_get(node, 1);
+ if (IS_ERR(clk)) {
+ pr_debug("clk-bypass for %s not ready, retry\n",
+ node->name);
+ if (!ti_clk_retry_init(node, hw, omap_clk_register_apll))
+ return;
+
+ goto cleanup;
+ }
+
+ ad->clk_bypass = __clk_get_hw(clk);
+
clk = clk_register(NULL, &clk_hw->hw);
if (!IS_ERR(clk)) {
of_clk_add_provider(node, of_clk_src_simple_get, clk);
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
index b5cc6f6..032c658 100644
--- a/drivers/clk/ti/clkt_dpll.c
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -254,7 +254,7 @@
v >>= __ffs(dd->enable_mask);
if (_omap2_dpll_is_in_bypass(v))
- return clk_get_rate(dd->clk_bypass);
+ return clk_hw_get_rate(dd->clk_bypass);
v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
dpll_mult = v & dd->mult_mask;
@@ -262,7 +262,7 @@
dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
- dpll_clk = (u64)clk_get_rate(dd->clk_ref) * dpll_mult;
+ dpll_clk = (u64)clk_hw_get_rate(dd->clk_ref) * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
return dpll_clk;
@@ -301,7 +301,7 @@
dd = clk->dpll_data;
- ref_rate = clk_get_rate(dd->clk_ref);
+ ref_rate = clk_hw_get_rate(dd->clk_ref);
clk_name = clk_hw_get_name(hw);
pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
clk_name, target_rate);
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 5519b38..f8306f1 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -147,11 +147,9 @@
struct dpll_data *dd = clk_hw->dpll_data;
struct clk *clk;
- dd->clk_ref = of_clk_get(node, 0);
- dd->clk_bypass = of_clk_get(node, 1);
-
- if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) {
- pr_debug("clk-ref or clk-bypass missing for %s, retry later\n",
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_debug("clk-ref missing for %s, retry later\n",
node->name);
if (!ti_clk_retry_init(node, hw, _register_dpll))
return;
@@ -159,6 +157,21 @@
goto cleanup;
}
+ dd->clk_ref = __clk_get_hw(clk);
+
+ clk = of_clk_get(node, 1);
+
+ if (IS_ERR(clk)) {
+ pr_debug("clk-bypass missing for %s, retry later\n",
+ node->name);
+ if (!ti_clk_retry_init(node, hw, _register_dpll))
+ return;
+
+ goto cleanup;
+ }
+
+ dd->clk_bypass = __clk_get_hw(clk);
+
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
@@ -251,8 +264,8 @@
dd->recal_en_bit = dpll->recal_en_bit;
dd->recal_st_bit = dpll->recal_st_bit;
- dd->clk_ref = clk_ref;
- dd->clk_bypass = clk_bypass;
+ dd->clk_ref = __clk_get_hw(clk_ref);
+ dd->clk_bypass = __clk_get_hw(clk_bypass);
if (dpll->flags & CLKF_CORE)
ops = &omap3_dpll_core_ck_ops;
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
index cc73929..88f2ce8 100644
--- a/drivers/clk/ti/dpll3xxx.c
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -98,7 +98,7 @@
unsigned long fint;
u16 f = 0;
- fint = clk_get_rate(clk->dpll_data->clk_ref) / n;
+ fint = clk_hw_get_rate(clk->dpll_data->clk_ref) / n;
pr_debug("clock: fint is %lu\n", fint);
@@ -460,12 +460,11 @@
parent = clk_hw_get_parent(hw);
- if (clk_hw_get_rate(hw) ==
- clk_hw_get_rate(__clk_get_hw(dd->clk_bypass))) {
- WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ if (clk_hw_get_rate(hw) == clk_hw_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
} else {
- WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ WARN_ON(parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
}
@@ -513,13 +512,13 @@
if (!dd)
return -EINVAL;
- if (clk_get_rate(dd->clk_bypass) == req->rate &&
+ if (clk_hw_get_rate(dd->clk_bypass) == req->rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ req->best_parent_hw = dd->clk_bypass;
} else {
req->rate = omap2_dpll_round_rate(hw, req->rate,
&req->best_parent_rate);
- req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ req->best_parent_hw = dd->clk_ref;
}
req->best_parent_rate = req->rate;
@@ -577,7 +576,7 @@
if (!dd)
return -EINVAL;
- if (clk_hw_get_parent(hw) != __clk_get_hw(dd->clk_ref))
+ if (clk_hw_get_parent(hw) != dd->clk_ref)
return -EINVAL;
if (dd->last_rounded_rate == 0)
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
index 660d743..82c05b5 100644
--- a/drivers/clk/ti/dpll44xx.c
+++ b/drivers/clk/ti/dpll44xx.c
@@ -94,7 +94,7 @@
{
long fint, fout;
- fint = clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fint = clk_hw_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
fout = fint * dd->last_rounded_m;
if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
@@ -212,13 +212,13 @@
if (!dd)
return -EINVAL;
- if (clk_get_rate(dd->clk_bypass) == req->rate &&
+ if (clk_hw_get_rate(dd->clk_bypass) == req->rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ req->best_parent_hw = dd->clk_bypass;
} else {
req->rate = omap4_dpll_regm4xen_round_rate(hw, req->rate,
&req->best_parent_rate);
- req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ req->best_parent_hw = dd->clk_ref;
}
req->best_parent_rate = req->rate;