diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4b137a6..5295d85 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -143,8 +143,6 @@
 
 source "drivers/staging/cxt1e1/Kconfig"
 
-source "drivers/staging/ti-st/Kconfig"
-
 source "drivers/staging/xgifb/Kconfig"
 
 source "drivers/staging/msm/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index dcd47db..0983edc 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -54,7 +54,6 @@
 obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/
 obj-$(CONFIG_CRYSTALHD)		+= crystalhd/
 obj-$(CONFIG_CXT1E1)		+= cxt1e1/
-obj-$(CONFIG_TI_ST)		+= ti-st/
 obj-$(CONFIG_FB_XGI)		+= xgifb/
 obj-$(CONFIG_MSM_STAGING)	+= msm/
 obj-$(CONFIG_EASYCAP)		+= easycap/
diff --git a/drivers/staging/ti-st/Kconfig b/drivers/staging/ti-st/Kconfig
deleted file mode 100644
index 074b8e8..0000000
--- a/drivers/staging/ti-st/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# TI's shared transport line discipline and the protocol
-# drivers (BT, FM and GPS)
-#
-menu "Texas Instruments shared transport line discipline"
-config ST_BT
-	tristate "BlueZ bluetooth driver for ST"
-	depends on BT && RFKILL
-	select TI_ST
-	help
-	  This enables the Bluetooth driver for TI BT/FM/GPS combo devices.
-	  This makes use of shared transport line discipline core driver to
-	  communicate with the BT core of the combo chip.
-endmenu
diff --git a/drivers/staging/ti-st/Makefile b/drivers/staging/ti-st/Makefile
deleted file mode 100644
index 9125462..0000000
--- a/drivers/staging/ti-st/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for TI's shared transport line discipline
-# and its protocol drivers (BT, FM, GPS)
-#
-obj-$(CONFIG_ST_BT) 		+= btwilink.o
diff --git a/drivers/staging/ti-st/TODO b/drivers/staging/ti-st/TODO
deleted file mode 100644
index ebfd6bb..0000000
--- a/drivers/staging/ti-st/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-1. Step up and maintain this driver to ensure that it continues
-to work.  Having the hardware for this is pretty much a
-requirement.  If this does not happen, the will be removed in
-the 2.6.35 kernel release.
-
-Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/ti-st/btwilink.c b/drivers/staging/ti-st/btwilink.c
deleted file mode 100644
index 71e69f8..0000000
--- a/drivers/staging/ti-st/btwilink.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- *  Texas Instrument's Bluetooth Driver For Shared Transport.
- *
- *  Bluetooth Driver acts as interface between HCI core and
- *  TI Shared Transport Layer.
- *
- *  Copyright (C) 2009-2010 Texas Instruments
- *  Author: Raja Mani <raja_mani@ti.com>
- *	Pavan Savoy <pavan_savoy@ti.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/platform_device.h>
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-
-#include <linux/ti_wilink_st.h>
-
-/* Bluetooth Driver Version */
-#define VERSION               "1.0"
-
-/* Number of seconds to wait for registration completion
- * when ST returns PENDING status.
- */
-#define BT_REGISTER_TIMEOUT   6000	/* 6 sec */
-
-/**
- * struct ti_st - driver operation structure
- * @hdev: hci device pointer which binds to bt driver
- * @reg_status: ST registration callback status
- * @st_write: write function provided by the ST driver
- *	to be used by the driver during send_frame.
- * @wait_reg_completion - completion sync between ti_st_open
- *	and ti_st_registration_completion_cb.
- */
-struct ti_st {
-	struct hci_dev *hdev;
-	char reg_status;
-	long (*st_write) (struct sk_buff *);
-	struct completion wait_reg_completion;
-};
-
-/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
-static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
-{
-	struct hci_dev *hdev = hst->hdev;
-
-	/* Update HCI stat counters */
-	switch (pkt_type) {
-	case HCI_COMMAND_PKT:
-		hdev->stat.cmd_tx++;
-		break;
-
-	case HCI_ACLDATA_PKT:
-		hdev->stat.acl_tx++;
-		break;
-
-	case HCI_SCODATA_PKT:
-		hdev->stat.sco_tx++;
-		break;
-	}
-}
-
-/* ------- Interfaces to Shared Transport ------ */
-
-/* Called by ST layer to indicate protocol registration completion
- * status.ti_st_open() function will wait for signal from this
- * API when st_register() function returns ST_PENDING.
- */
-static void st_registration_completion_cb(void *priv_data, char data)
-{
-	struct ti_st *lhst = priv_data;
-
-	/* Save registration status for use in ti_st_open() */
-	lhst->reg_status = data;
-	/* complete the wait in ti_st_open() */
-	complete(&lhst->wait_reg_completion);
-}
-
-/* Called by Shared Transport layer when receive data is
- * available */
-static long st_receive(void *priv_data, struct sk_buff *skb)
-{
-	struct ti_st *lhst = priv_data;
-	int err;
-
-	if (!skb)
-		return -EFAULT;
-
-	if (!lhst) {
-		kfree_skb(skb);
-		return -EFAULT;
-	}
-
-	skb->dev = (void *) lhst->hdev;
-
-	/* Forward skb to HCI core layer */
-	err = hci_recv_frame(skb);
-	if (err < 0) {
-		BT_ERR("Unable to push skb to HCI core(%d)", err);
-		return err;
-	}
-
-	lhst->hdev->stat.byte_rx += skb->len;
-
-	return 0;
-}
-
-/* ------- Interfaces to HCI layer ------ */
-/* protocol structure registered with shared transport */
-static struct st_proto_s ti_st_proto = {
-	.type = ST_BT,
-	.recv = st_receive,
-	.reg_complete_cb = st_registration_completion_cb,
-};
-
-/* Called from HCI core to initialize the device */
-static int ti_st_open(struct hci_dev *hdev)
-{
-	unsigned long timeleft;
-	struct ti_st *hst;
-	int err;
-
-	BT_DBG("%s %p", hdev->name, hdev);
-	if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) {
-		BT_ERR("btwilink already opened");
-		return -EBUSY;
-	}
-
-	/* provide contexts for callbacks from ST */
-	hst = hdev->driver_data;
-	ti_st_proto.priv_data = hst;
-
-	err = st_register(&ti_st_proto);
-	if (err == -EINPROGRESS) {
-		/* ST is busy with either protocol registration or firmware
-		 * download.
-		 */
-		/* Prepare wait-for-completion handler data structures.
-		 */
-		init_completion(&hst->wait_reg_completion);
-
-		/* Reset ST registration callback status flag , this value
-		 * will be updated in ti_st_registration_completion_cb()
-		 * function whenever it called from ST driver.
-		 */
-		hst->reg_status = -EINPROGRESS;
-
-		BT_DBG("waiting for registration completion signal from ST");
-		timeleft = wait_for_completion_timeout
-			(&hst->wait_reg_completion,
-			 msecs_to_jiffies(BT_REGISTER_TIMEOUT));
-		if (!timeleft) {
-			clear_bit(HCI_RUNNING, &hdev->flags);
-			BT_ERR("Timeout(%d sec),didn't get reg "
-					"completion signal from ST",
-					BT_REGISTER_TIMEOUT / 1000);
-			return -ETIMEDOUT;
-		}
-
-		/* Is ST registration callback called with ERROR status? */
-		if (hst->reg_status != 0) {
-			clear_bit(HCI_RUNNING, &hdev->flags);
-			BT_ERR("ST registration completed with invalid "
-					"status %d", hst->reg_status);
-			return -EAGAIN;
-		}
-		err = 0;
-	} else if (err != 0) {
-		clear_bit(HCI_RUNNING, &hdev->flags);
-		BT_ERR("st_register failed %d", err);
-		return err;
-	}
-
-	/* ti_st_proto.write is filled up by the underlying shared
-	 * transport driver upon registration
-	 */
-	hst->st_write = ti_st_proto.write;
-	if (!hst->st_write) {
-		BT_ERR("undefined ST write function");
-		clear_bit(HCI_RUNNING, &hdev->flags);
-
-		/* Undo registration with ST */
-		err = st_unregister(ST_BT);
-		if (err)
-			BT_ERR("st_unregister() failed with error %d", err);
-
-		hst->st_write = NULL;
-		return err;
-	}
-
-	return err;
-}
-
-/* Close device */
-static int ti_st_close(struct hci_dev *hdev)
-{
-	int err;
-	struct ti_st *hst = hdev->driver_data;
-
-	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
-		return 0;
-
-	/* continue to unregister from transport */
-	err = st_unregister(ST_BT);
-	if (err)
-		BT_ERR("st_unregister() failed with error %d", err);
-
-	hst->st_write = NULL;
-
-	return err;
-}
-
-static int ti_st_send_frame(struct sk_buff *skb)
-{
-	struct hci_dev *hdev;
-	struct ti_st *hst;
-	long len;
-
-	hdev = (struct hci_dev *)skb->dev;
-
-	if (!test_bit(HCI_RUNNING, &hdev->flags))
-		return -EBUSY;
-
-	hst = hdev->driver_data;
-
-	/* Prepend skb with frame type */
-	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
-
-	BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
-			skb->len);
-
-	/* Insert skb to shared transport layer's transmit queue.
-	 * Freeing skb memory is taken care in shared transport layer,
-	 * so don't free skb memory here.
-	 */
-	len = hst->st_write(skb);
-	if (len < 0) {
-		kfree_skb(skb);
-		BT_ERR("ST write failed (%ld)", len);
-		/* Try Again, would only fail if UART has gone bad */
-		return -EAGAIN;
-	}
-
-	/* ST accepted our skb. So, Go ahead and do rest */
-	hdev->stat.byte_tx += len;
-	ti_st_tx_complete(hst, bt_cb(skb)->pkt_type);
-
-	return 0;
-}
-
-static void ti_st_destruct(struct hci_dev *hdev)
-{
-	BT_DBG("%s", hdev->name);
-	kfree(hdev->driver_data);
-}
-
-static int bt_ti_probe(struct platform_device *pdev)
-{
-	static struct ti_st *hst;
-	struct hci_dev *hdev;
-	int err;
-
-	hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL);
-	if (!hst)
-		return -ENOMEM;
-
-	/* Expose "hciX" device to user space */
-	hdev = hci_alloc_dev();
-	if (!hdev) {
-		kfree(hst);
-		return -ENOMEM;
-	}
-
-	BT_DBG("hdev %p", hdev);
-
-	hst->hdev = hdev;
-	hdev->bus = HCI_UART;
-	hdev->driver_data = hst;
-	hdev->open = ti_st_open;
-	hdev->close = ti_st_close;
-	hdev->flush = NULL;
-	hdev->send = ti_st_send_frame;
-	hdev->destruct = ti_st_destruct;
-	hdev->owner = THIS_MODULE;
-
-	err = hci_register_dev(hdev);
-	if (err < 0) {
-		BT_ERR("Can't register HCI device error %d", err);
-		kfree(hst);
-		hci_free_dev(hdev);
-		return err;
-	}
-
-	BT_DBG("HCI device registered (hdev %p)", hdev);
-
-	dev_set_drvdata(&pdev->dev, hst);
-	return err;
-}
-
-static int bt_ti_remove(struct platform_device *pdev)
-{
-	struct hci_dev *hdev;
-	struct ti_st *hst = dev_get_drvdata(&pdev->dev);
-
-	if (!hst)
-		return -EFAULT;
-
-	hdev = hst->hdev;
-	ti_st_close(hdev);
-	hci_unregister_dev(hdev);
-
-	hci_free_dev(hdev);
-	kfree(hst);
-
-	dev_set_drvdata(&pdev->dev, NULL);
-	return 0;
-}
-
-static struct platform_driver btwilink_driver = {
-	.probe = bt_ti_probe,
-	.remove = bt_ti_remove,
-	.driver = {
-		.name = "btwilink",
-		.owner = THIS_MODULE,
-	},
-};
-
-/* ------- Module Init/Exit interfaces ------ */
-static int __init btwilink_init(void)
-{
-	BT_INFO("Bluetooth Driver for TI WiLink - Version %s", VERSION);
-
-	return platform_driver_register(&btwilink_driver);
-}
-
-static void __exit btwilink_exit(void)
-{
-	platform_driver_unregister(&btwilink_driver);
-}
-
-module_init(btwilink_init);
-module_exit(btwilink_exit);
-
-/* ------ Module Info ------ */
-
-MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
-MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
-MODULE_VERSION(VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/ti-st/sysfs-uim b/drivers/staging/ti-st/sysfs-uim
deleted file mode 100644
index 626bda5..0000000
--- a/drivers/staging/ti-st/sysfs-uim
+++ /dev/null
@@ -1,28 +0,0 @@
-What:           /sys/class/rfkill/rfkill%d/
-Date:           March 22
-Contact:        Pavan Savoy <pavan_savoy@ti.com>
-Description:
-		Creates the rfkill entries for Radio apps like
-		BT app, FM app or GPS app to toggle corresponding
-		cores of the chip
-
-What:           /dev/rfkill
-Date:           March 22
-Contact:        Pavan Savoy <pavan_savoy@ti.com>
-Description:
-		A daemon which maintains the ldisc installation and
-		uninstallation would be ppolling on this device and listening
-		on events which would suggest either to install or un-install
-		line discipline
-
-What:           /sys/kernel/debug/ti-st/version
-Contact:        Pavan Savoy <pavan_savoy@ti.com>
-Description:
-		WiLink chip's ROM version exposed to user-space for some
-		proprietary protocol stacks to make use of.
-
-What:           /sys/kernel/debug/ti-st/protocols
-Contact:        Pavan Savoy <pavan_savoy@ti.com>
-Description:
-		The reason for chip being ON, the list of protocols registered.
-