| /* |
| * Common CPCAP configuration used on Motorola phones |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| &mcspi1 { |
| cpcap: pmic@0 { |
| compatible = "motorola,cpcap", "st,6556002"; |
| reg = <0>; /* cs0 */ |
| interrupt-parent = <&gpio1>; |
| interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| spi-max-frequency = <3000000>; |
| spi-cs-high; |
| |
| cpcap_adc: adc { |
| compatible = "motorola,mapphone-cpcap-adc"; |
| interrupts-extended = <&cpcap 8 0>; |
| interrupt-names = "adcdone"; |
| #io-channel-cells = <1>; |
| }; |
| |
| cpcap_charger: charger { |
| compatible = "motorola,mapphone-cpcap-charger"; |
| interrupts-extended = < |
| &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 |
| &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 |
| >; |
| interrupt-names = |
| "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", |
| "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; |
| mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW |
| &gpio3 23 GPIO_ACTIVE_LOW>; |
| io-channels = <&cpcap_adc 0 &cpcap_adc 1 |
| &cpcap_adc 2 &cpcap_adc 5 |
| &cpcap_adc 6>; |
| io-channel-names = "battdetb", "battp", |
| "vbus", "chg_isense", |
| "batti"; |
| }; |
| |
| cpcap_regulator: regulator { |
| compatible = "motorola,mapphone-cpcap-regulator"; |
| |
| cpcap_regulators: regulators { |
| }; |
| }; |
| |
| cpcap_rtc: rtc { |
| compatible = "motorola,cpcap-rtc"; |
| |
| interrupt-parent = <&cpcap>; |
| interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>; |
| }; |
| |
| power_button: button { |
| compatible = "motorola,cpcap-pwrbutton"; |
| |
| interrupts = <23 IRQ_TYPE_NONE>; |
| }; |
| |
| cpcap_usb2_phy: phy { |
| compatible = "motorola,mapphone-cpcap-usb-phy"; |
| pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; |
| pinctrl-1 = <&usb_ulpi_pins>; |
| pinctrl-2 = <&usb_utmi_pins>; |
| pinctrl-3 = <&uart3_pins>; |
| pinctrl-names = "default", "ulpi", "utmi", "uart"; |
| #phy-cells = <0>; |
| interrupts-extended = < |
| &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 |
| &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 |
| &cpcap 48 1 |
| >; |
| interrupt-names = |
| "id_ground", "id_float", "se0conn", "vbusvld", |
| "sessvld", "sessend", "se1", "dm", "dp"; |
| mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH |
| &gpio1 0 GPIO_ACTIVE_HIGH>; |
| io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; |
| io-channel-names = "vbus", "id"; |
| vusb-supply = <&vusb>; |
| }; |
| |
| led_red: led-red { |
| compatible = "motorola,cpcap-led-red"; |
| vdd-supply = <&sw5>; |
| label = "status-led:red"; |
| }; |
| |
| led_green: led-green { |
| compatible = "motorola,cpcap-led-green"; |
| vdd-supply = <&sw5>; |
| label = "status-led:green"; |
| }; |
| |
| led_blue: led-blue { |
| compatible = "motorola,cpcap-led-blue"; |
| vdd-supply = <&sw5>; |
| label = "status-led:blue"; |
| }; |
| |
| led_adl: led-adl { |
| compatible = "motorola,cpcap-led-adl"; |
| vdd-supply = <&sw5>; |
| label = "button-backlight"; |
| }; |
| |
| led_cp: led-cp { |
| compatible = "motorola,cpcap-led-cp"; |
| vdd-supply = <&sw5>; |
| label = "shift-key-light"; |
| }; |
| }; |
| }; |
| |
| &cpcap_regulators { |
| sw5: SW5 { |
| regulator-min-microvolt = <5050000>; |
| regulator-max-microvolt = <5050000>; |
| regulator-enable-ramp-delay = <50000>; |
| regulator-boot-on; |
| }; |
| |
| vcam: VCAM { |
| regulator-min-microvolt = <2900000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| /* Used by DSS */ |
| vcsi: VCSI { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-enable-ramp-delay = <1000>; |
| regulator-boot-on; |
| }; |
| |
| vdac: VDAC { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vdig: VDIG { |
| regulator-min-microvolt = <1875000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vfuse: VFUSE { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <3150000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vhvio: VHVIO { |
| regulator-min-microvolt = <2775000>; |
| regulator-max-microvolt = <2775000>; |
| regulator-enable-ramp-delay = <1000>; |
| regulator-always-on; |
| }; |
| |
| /* Used by eMMC at mmc2 */ |
| vsdio: VSDIO { |
| regulator-min-microvolt = <2900000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vpll: VPLL { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-enable-ramp-delay = <100>; |
| }; |
| |
| vrf1: VRF1 { |
| regulator-min-microvolt = <2775000>; |
| regulator-max-microvolt = <2775000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vrf2: VRF2 { |
| regulator-min-microvolt = <2775000>; |
| regulator-max-microvolt = <2775000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vrfref: VRFREF { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2775000>; |
| regulator-enable-ramp-delay = <100>; |
| }; |
| |
| vwlan1: VWLAN1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1900000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| /* Used by micro-SDIO at mmc1 */ |
| vwlan2: VWLAN2 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vsim: VSIM { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vsimcard: VSIMCARD { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vvib: VVIB { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-enable-ramp-delay = <500>; |
| }; |
| |
| vusb: VUSB { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| |
| vaudio: VAUDIO { |
| regulator-min-microvolt = <2775000>; |
| regulator-max-microvolt = <2775000>; |
| regulator-enable-ramp-delay = <1000>; |
| }; |
| }; |