| /*************************************************************************** |
| * |
| * Copyright (C) 2007-2010 SMSC |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/slab.h> |
| #include "smsc75xx.h" |
| |
| #define SMSC_CHIPNAME "smsc75xx" |
| #define SMSC_DRIVER_VERSION "1.0.0" |
| #define HS_USB_PKT_SIZE (512) |
| #define FS_USB_PKT_SIZE (64) |
| #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) |
| #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) |
| #define DEFAULT_BULK_IN_DELAY (0x00002000) |
| #define MAX_SINGLE_PACKET_SIZE (9000) |
| #define LAN75XX_EEPROM_MAGIC (0x7500) |
| #define EEPROM_MAC_OFFSET (0x01) |
| #define DEFAULT_TX_CSUM_ENABLE (true) |
| #define DEFAULT_RX_CSUM_ENABLE (true) |
| #define DEFAULT_TSO_ENABLE (true) |
| #define SMSC75XX_INTERNAL_PHY_ID (1) |
| #define SMSC75XX_TX_OVERHEAD (8) |
| #define MAX_RX_FIFO_SIZE (20 * 1024) |
| #define MAX_TX_FIFO_SIZE (12 * 1024) |
| #define USB_VENDOR_ID_SMSC (0x0424) |
| #define USB_PRODUCT_ID_LAN7500 (0x7500) |
| #define USB_PRODUCT_ID_LAN7505 (0x7505) |
| |
| #define check_warn(ret, fmt, args...) \ |
| ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); }) |
| |
| #define check_warn_return(ret, fmt, args...) \ |
| ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } }) |
| |
| #define check_warn_goto_done(ret, fmt, args...) \ |
| ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } }) |
| |
| struct smsc75xx_priv { |
| struct usbnet *dev; |
| u32 rfe_ctl; |
| u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN]; |
| struct mutex dataport_mutex; |
| spinlock_t rfe_ctl_lock; |
| struct work_struct set_multicast; |
| }; |
| |
| struct usb_context { |
| struct usb_ctrlrequest req; |
| struct usbnet *dev; |
| }; |
| |
| static int turbo_mode = true; |
| module_param(turbo_mode, bool, 0644); |
| MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); |
| |
| static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, |
| u32 *data) |
| { |
| u32 *buf = kmalloc(4, GFP_KERNEL); |
| int ret; |
| |
| BUG_ON(!dev); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), |
| USB_VENDOR_REQUEST_READ_REGISTER, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, buf, 4, USB_CTRL_GET_TIMEOUT); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, |
| "Failed to read register index 0x%08x", index); |
| |
| le32_to_cpus(buf); |
| *data = *buf; |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, |
| u32 data) |
| { |
| u32 *buf = kmalloc(4, GFP_KERNEL); |
| int ret; |
| |
| BUG_ON(!dev); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| *buf = data; |
| cpu_to_le32s(buf); |
| |
| ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| USB_VENDOR_REQUEST_WRITE_REGISTER, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, buf, 4, USB_CTRL_SET_TIMEOUT); |
| |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, |
| "Failed to write register index 0x%08x", index); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| /* Loop until the read is completed with timeout |
| * called with phy_mutex held */ |
| static int smsc75xx_phy_wait_not_busy(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = smsc75xx_read_reg(dev, MII_ACCESS, &val); |
| check_warn_return(ret, "Error reading MII_ACCESS"); |
| |
| if (!(val & MII_ACCESS_BUSY)) |
| return 0; |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| return -EIO; |
| } |
| |
| static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| ret = smsc75xx_phy_wait_not_busy(dev); |
| check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read"); |
| |
| /* set the address, index & direction (read from PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) |
| | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) |
| | MII_ACCESS_READ; |
| ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); |
| check_warn_goto_done(ret, "Error writing MII_ACCESS"); |
| |
| ret = smsc75xx_phy_wait_not_busy(dev); |
| check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx); |
| |
| ret = smsc75xx_read_reg(dev, MII_DATA, &val); |
| check_warn_goto_done(ret, "Error reading MII_DATA"); |
| |
| ret = (u16)(val & 0xFFFF); |
| |
| done: |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, |
| int regval) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| ret = smsc75xx_phy_wait_not_busy(dev); |
| check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write"); |
| |
| val = regval; |
| ret = smsc75xx_write_reg(dev, MII_DATA, val); |
| check_warn_goto_done(ret, "Error writing MII_DATA"); |
| |
| /* set the address, index & direction (write to PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) |
| | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) |
| | MII_ACCESS_WRITE; |
| ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); |
| check_warn_goto_done(ret, "Error writing MII_ACCESS"); |
| |
| ret = smsc75xx_phy_wait_not_busy(dev); |
| check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx); |
| |
| done: |
| mutex_unlock(&dev->phy_mutex); |
| } |
| |
| static int smsc75xx_wait_eeprom(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = smsc75xx_read_reg(dev, E2P_CMD, &val); |
| check_warn_return(ret, "Error reading E2P_CMD"); |
| |
| if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT)) |
| break; |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) { |
| netdev_warn(dev->net, "EEPROM read operation timeout"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = smsc75xx_read_reg(dev, E2P_CMD, &val); |
| check_warn_return(ret, "Error reading E2P_CMD"); |
| |
| if (!(val & E2P_CMD_BUSY)) |
| return 0; |
| |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| netdev_warn(dev->net, "EEPROM is busy"); |
| return -EIO; |
| } |
| |
| static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc75xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR); |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| check_warn_return(ret, "Error writing E2P_CMD"); |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc75xx_read_reg(dev, E2P_DATA, &val); |
| check_warn_return(ret, "Error reading E2P_DATA"); |
| |
| data[i] = val & 0xFF; |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc75xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| /* Issue write/erase enable command */ |
| val = E2P_CMD_BUSY | E2P_CMD_EWEN; |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| check_warn_return(ret, "Error writing E2P_CMD"); |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| |
| /* Fill data register */ |
| val = data[i]; |
| ret = smsc75xx_write_reg(dev, E2P_DATA, val); |
| check_warn_return(ret, "Error writing E2P_DATA"); |
| |
| /* Send "write" command */ |
| val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR); |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| check_warn_return(ret, "Error writing E2P_CMD"); |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev) |
| { |
| int i, ret; |
| |
| for (i = 0; i < 100; i++) { |
| u32 dp_sel; |
| ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); |
| check_warn_return(ret, "Error reading DP_SEL"); |
| |
| if (dp_sel & DP_SEL_DPRDY) |
| return 0; |
| |
| udelay(40); |
| } |
| |
| netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out"); |
| |
| return -EIO; |
| } |
| |
| static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr, |
| u32 length, u32 *buf) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 dp_sel; |
| int i, ret; |
| |
| mutex_lock(&pdata->dataport_mutex); |
| |
| ret = smsc75xx_dataport_wait_not_busy(dev); |
| check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry"); |
| |
| ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); |
| check_warn_goto_done(ret, "Error reading DP_SEL"); |
| |
| dp_sel &= ~DP_SEL_RSEL; |
| dp_sel |= ram_select; |
| ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel); |
| check_warn_goto_done(ret, "Error writing DP_SEL"); |
| |
| for (i = 0; i < length; i++) { |
| ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i); |
| check_warn_goto_done(ret, "Error writing DP_ADDR"); |
| |
| ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]); |
| check_warn_goto_done(ret, "Error writing DP_DATA"); |
| |
| ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE); |
| check_warn_goto_done(ret, "Error writing DP_CMD"); |
| |
| ret = smsc75xx_dataport_wait_not_busy(dev); |
| check_warn_goto_done(ret, "smsc75xx_dataport_write timeout"); |
| } |
| |
| done: |
| mutex_unlock(&pdata->dataport_mutex); |
| return ret; |
| } |
| |
| /* returns hash bit number for given MAC address */ |
| static u32 smsc75xx_hash(char addr[ETH_ALEN]) |
| { |
| return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff; |
| } |
| |
| static void smsc75xx_deferred_multicast_write(struct work_struct *param) |
| { |
| struct smsc75xx_priv *pdata = |
| container_of(param, struct smsc75xx_priv, set_multicast); |
| struct usbnet *dev = pdata->dev; |
| int ret; |
| |
| netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x", |
| pdata->rfe_ctl); |
| |
| smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN, |
| DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table); |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| check_warn(ret, "Error writing RFE_CRL"); |
| } |
| |
| static void smsc75xx_set_multicast(struct net_device *netdev) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| int i; |
| |
| spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); |
| |
| pdata->rfe_ctl &= |
| ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF); |
| pdata->rfe_ctl |= RFE_CTL_AB; |
| |
| for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++) |
| pdata->multicast_hash_table[i] = 0; |
| |
| if (dev->net->flags & IFF_PROMISC) { |
| netif_dbg(dev, drv, dev->net, "promiscuous mode enabled"); |
| pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU; |
| } else if (dev->net->flags & IFF_ALLMULTI) { |
| netif_dbg(dev, drv, dev->net, "receive all multicast enabled"); |
| pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF; |
| } else if (!netdev_mc_empty(dev->net)) { |
| struct netdev_hw_addr *ha; |
| |
| netif_dbg(dev, drv, dev->net, "receive multicast hash filter"); |
| |
| pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF; |
| |
| netdev_for_each_mc_addr(ha, netdev) { |
| u32 bitnum = smsc75xx_hash(ha->addr); |
| pdata->multicast_hash_table[bitnum / 32] |= |
| (1 << (bitnum % 32)); |
| } |
| } else { |
| netif_dbg(dev, drv, dev->net, "receive own packets only"); |
| pdata->rfe_ctl |= RFE_CTL_DPF; |
| } |
| |
| spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); |
| |
| /* defer register writes to a sleepable context */ |
| schedule_work(&pdata->set_multicast); |
| } |
| |
| static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex, |
| u16 lcladv, u16 rmtadv) |
| { |
| u32 flow = 0, fct_flow = 0; |
| int ret; |
| |
| if (duplex == DUPLEX_FULL) { |
| u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| if (cap & FLOW_CTRL_TX) { |
| flow = (FLOW_TX_FCEN | 0xFFFF); |
| /* set fct_flow thresholds to 20% and 80% */ |
| fct_flow = (8 << 8) | 32; |
| } |
| |
| if (cap & FLOW_CTRL_RX) |
| flow |= FLOW_RX_FCEN; |
| |
| netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s", |
| (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), |
| (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); |
| } else { |
| netif_dbg(dev, link, dev->net, "half duplex"); |
| } |
| |
| ret = smsc75xx_write_reg(dev, FLOW, flow); |
| check_warn_return(ret, "Error writing FLOW"); |
| |
| ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow); |
| check_warn_return(ret, "Error writing FCT_FLOW"); |
| |
| return 0; |
| } |
| |
| static int smsc75xx_link_reset(struct usbnet *dev) |
| { |
| struct mii_if_info *mii = &dev->mii; |
| struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
| u16 lcladv, rmtadv; |
| int ret; |
| |
| /* clear interrupt status */ |
| ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); |
| check_warn_return(ret, "Error reading PHY_INT_SRC"); |
| |
| ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); |
| check_warn_return(ret, "Error writing INT_STS"); |
| |
| mii_check_media(mii, 1, 1); |
| mii_ethtool_gset(&dev->mii, &ecmd); |
| lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE); |
| rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA); |
| |
| netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x" |
| " rmtadv: %04x", ethtool_cmd_speed(&ecmd), |
| ecmd.duplex, lcladv, rmtadv); |
| |
| return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); |
| } |
| |
| static void smsc75xx_status(struct usbnet *dev, struct urb *urb) |
| { |
| u32 intdata; |
| |
| if (urb->actual_length != 4) { |
| netdev_warn(dev->net, |
| "unexpected urb length %d", urb->actual_length); |
| return; |
| } |
| |
| memcpy(&intdata, urb->transfer_buffer, 4); |
| le32_to_cpus(&intdata); |
| |
| netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata); |
| |
| if (intdata & INT_ENP_PHY_INT) |
| usbnet_defer_kevent(dev, EVENT_LINK_RESET); |
| else |
| netdev_warn(dev->net, |
| "unexpected interrupt, intdata=0x%08X", intdata); |
| } |
| |
| static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net) |
| { |
| return MAX_EEPROM_SIZE; |
| } |
| |
| static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| ee->magic = LAN75XX_EEPROM_MAGIC; |
| |
| return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (ee->magic != LAN75XX_EEPROM_MAGIC) { |
| netdev_warn(dev->net, |
| "EEPROM: magic value mismatch: 0x%x", ee->magic); |
| return -EINVAL; |
| } |
| |
| return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static const struct ethtool_ops smsc75xx_ethtool_ops = { |
| .get_link = usbnet_get_link, |
| .nway_reset = usbnet_nway_reset, |
| .get_drvinfo = usbnet_get_drvinfo, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_settings = usbnet_get_settings, |
| .set_settings = usbnet_set_settings, |
| .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len, |
| .get_eeprom = smsc75xx_ethtool_get_eeprom, |
| .set_eeprom = smsc75xx_ethtool_set_eeprom, |
| }; |
| |
| static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| |
| static void smsc75xx_init_mac_address(struct usbnet *dev) |
| { |
| /* try reading mac address from EEPROM */ |
| if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, |
| dev->net->dev_addr) == 0) { |
| if (is_valid_ether_addr(dev->net->dev_addr)) { |
| /* eeprom values are valid so use them */ |
| netif_dbg(dev, ifup, dev->net, |
| "MAC address read from EEPROM"); |
| return; |
| } |
| } |
| |
| /* no eeprom, or eeprom values are invalid. generate random MAC */ |
| random_ether_addr(dev->net->dev_addr); |
| netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr"); |
| } |
| |
| static int smsc75xx_set_mac_address(struct usbnet *dev) |
| { |
| u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 | |
| dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24; |
| u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8; |
| |
| int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi); |
| check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret); |
| |
| ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo); |
| check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret); |
| |
| addr_hi |= ADDR_FILTX_FB_VALID; |
| ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi); |
| check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret); |
| |
| ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo); |
| check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret); |
| |
| return 0; |
| } |
| |
| static int smsc75xx_phy_initialize(struct usbnet *dev) |
| { |
| int bmcr, timeout = 0; |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = smsc75xx_mdio_read; |
| dev->mii.mdio_write = smsc75xx_mdio_write; |
| dev->mii.phy_id_mask = 0x1f; |
| dev->mii.reg_num_mask = 0x1f; |
| dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; |
| |
| /* reset phy and wait for reset to complete */ |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| |
| do { |
| msleep(10); |
| bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); |
| check_warn_return(bmcr, "Error reading MII_BMCR"); |
| timeout++; |
| } while ((bmcr & MII_BMCR) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout on PHY Reset"); |
| return -EIO; |
| } |
| |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | |
| ADVERTISE_PAUSE_ASYM); |
| |
| /* read to clear */ |
| smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); |
| check_warn_return(bmcr, "Error reading PHY_INT_SRC"); |
| |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, |
| PHY_INT_MASK_DEFAULT); |
| mii_nway_restart(&dev->mii); |
| |
| netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); |
| return 0; |
| } |
| |
| static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) |
| { |
| int ret = 0; |
| u32 buf; |
| bool rxenabled; |
| |
| ret = smsc75xx_read_reg(dev, MAC_RX, &buf); |
| check_warn_return(ret, "Failed to read MAC_RX: %d", ret); |
| |
| rxenabled = ((buf & MAC_RX_RXEN) != 0); |
| |
| if (rxenabled) { |
| buf &= ~MAC_RX_RXEN; |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| check_warn_return(ret, "Failed to write MAC_RX: %d", ret); |
| } |
| |
| /* add 4 to size for FCS */ |
| buf &= ~MAC_RX_MAX_SIZE; |
| buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE); |
| |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| check_warn_return(ret, "Failed to write MAC_RX: %d", ret); |
| |
| if (rxenabled) { |
| buf |= MAC_RX_RXEN; |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| check_warn_return(ret, "Failed to write MAC_RX: %d", ret); |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); |
| check_warn_return(ret, "Failed to set mac rx frame length"); |
| |
| return usbnet_change_mtu(netdev, new_mtu); |
| } |
| |
| /* Enable or disable Rx checksum offload engine */ |
| static int smsc75xx_set_features(struct net_device *netdev, u32 features) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); |
| |
| if (features & NETIF_F_RXCSUM) |
| pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM; |
| else |
| pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM); |
| |
| spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); |
| /* it's racing here! */ |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| check_warn_return(ret, "Error writing RFE_CTL"); |
| |
| return 0; |
| } |
| |
| static int smsc75xx_reset(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 buf; |
| int ret = 0, timeout; |
| |
| netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset"); |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| |
| buf |= HW_CFG_LRST; |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| check_warn_return(ret, "Failed to write HW_CFG: %d", ret); |
| |
| timeout = 0; |
| do { |
| msleep(10); |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| timeout++; |
| } while ((buf & HW_CFG_LRST) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout on completion of Lite Reset"); |
| return -EIO; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY"); |
| |
| ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); |
| check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); |
| |
| buf |= PMT_CTL_PHY_RST; |
| |
| ret = smsc75xx_write_reg(dev, PMT_CTL, buf); |
| check_warn_return(ret, "Failed to write PMT_CTL: %d", ret); |
| |
| timeout = 0; |
| do { |
| msleep(10); |
| ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); |
| check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); |
| timeout++; |
| } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout waiting for PHY Reset"); |
| return -EIO; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "PHY reset complete"); |
| |
| smsc75xx_init_mac_address(dev); |
| |
| ret = smsc75xx_set_mac_address(dev); |
| check_warn_return(ret, "Failed to set mac address"); |
| |
| netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr); |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf); |
| |
| buf |= HW_CFG_BIR; |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| check_warn_return(ret, "Failed to write HW_CFG: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after " |
| "writing HW_CFG_BIR: 0x%08x", buf); |
| |
| if (!turbo_mode) { |
| buf = 0; |
| dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; |
| } else if (dev->udev->speed == USB_SPEED_HIGH) { |
| buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; |
| } else { |
| buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld", |
| (ulong)dev->rx_urb_size); |
| |
| ret = smsc75xx_write_reg(dev, BURST_CAP, buf); |
| check_warn_return(ret, "Failed to write BURST_CAP: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, BURST_CAP, &buf); |
| check_warn_return(ret, "Failed to read BURST_CAP: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BURST_CAP after writing: 0x%08x", buf); |
| |
| ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); |
| check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf); |
| check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BULK_IN_DLY after writing: 0x%08x", buf); |
| |
| if (turbo_mode) { |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); |
| |
| buf |= (HW_CFG_MEF | HW_CFG_BCE); |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| check_warn_return(ret, "Failed to write HW_CFG: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| check_warn_return(ret, "Failed to read HW_CFG: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); |
| } |
| |
| /* set FIFO sizes */ |
| buf = (MAX_RX_FIFO_SIZE - 512) / 512; |
| ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf); |
| check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf); |
| |
| buf = (MAX_TX_FIFO_SIZE - 512) / 512; |
| ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf); |
| check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf); |
| |
| ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); |
| check_warn_return(ret, "Failed to write INT_STS: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, ID_REV, &buf); |
| check_warn_return(ret, "Failed to read ID_REV: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf); |
| |
| /* Configure GPIO pins as LED outputs */ |
| ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf); |
| check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret); |
| |
| buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL); |
| buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL; |
| |
| ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf); |
| check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret); |
| |
| ret = smsc75xx_write_reg(dev, FLOW, 0); |
| check_warn_return(ret, "Failed to write FLOW: %d", ret); |
| |
| ret = smsc75xx_write_reg(dev, FCT_FLOW, 0); |
| check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret); |
| |
| /* Don't need rfe_ctl_lock during initialisation */ |
| ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); |
| check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); |
| |
| pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF; |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| check_warn_return(ret, "Failed to write RFE_CTL: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); |
| check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl); |
| |
| /* Enable or disable checksum offload engines */ |
| smsc75xx_set_features(dev->net, dev->net->features); |
| |
| smsc75xx_set_multicast(dev->net); |
| |
| ret = smsc75xx_phy_initialize(dev); |
| check_warn_return(ret, "Failed to initialize PHY: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf); |
| check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret); |
| |
| /* enable PHY interrupts */ |
| buf |= INT_ENP_PHY_INT; |
| |
| ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); |
| check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); |
| |
| ret = smsc75xx_read_reg(dev, MAC_TX, &buf); |
| check_warn_return(ret, "Failed to read MAC_TX: %d", ret); |
| |
| buf |= MAC_TX_TXEN; |
| |
| ret = smsc75xx_write_reg(dev, MAC_TX, buf); |
| check_warn_return(ret, "Failed to write MAC_TX: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf); |
| |
| ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf); |
| check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret); |
| |
| buf |= FCT_TX_CTL_EN; |
| |
| ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf); |
| check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf); |
| |
| ret = smsc75xx_set_rx_max_frame_length(dev, 1514); |
| check_warn_return(ret, "Failed to set max rx frame length"); |
| |
| ret = smsc75xx_read_reg(dev, MAC_RX, &buf); |
| check_warn_return(ret, "Failed to read MAC_RX: %d", ret); |
| |
| buf |= MAC_RX_RXEN; |
| |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| check_warn_return(ret, "Failed to write MAC_RX: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf); |
| |
| ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf); |
| check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret); |
| |
| buf |= FCT_RX_CTL_EN; |
| |
| ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf); |
| check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret); |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf); |
| |
| netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0"); |
| return 0; |
| } |
| |
| static const struct net_device_ops smsc75xx_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_change_mtu = smsc75xx_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = smsc75xx_ioctl, |
| .ndo_set_rx_mode = smsc75xx_set_multicast, |
| .ndo_set_features = smsc75xx_set_features, |
| }; |
| |
| static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc75xx_priv *pdata = NULL; |
| int ret; |
| |
| printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); |
| |
| ret = usbnet_get_endpoints(dev, intf); |
| check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret); |
| |
| dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv), |
| GFP_KERNEL); |
| |
| pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| if (!pdata) { |
| netdev_warn(dev->net, "Unable to allocate smsc75xx_priv"); |
| return -ENOMEM; |
| } |
| |
| pdata->dev = dev; |
| |
| spin_lock_init(&pdata->rfe_ctl_lock); |
| mutex_init(&pdata->dataport_mutex); |
| |
| INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write); |
| |
| if (DEFAULT_TX_CSUM_ENABLE) { |
| dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| if (DEFAULT_TSO_ENABLE) |
| dev->net->features |= NETIF_F_SG | |
| NETIF_F_TSO | NETIF_F_TSO6; |
| } |
| if (DEFAULT_RX_CSUM_ENABLE) |
| dev->net->features |= NETIF_F_RXCSUM; |
| |
| dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | |
| NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM; |
| |
| /* Init all registers */ |
| ret = smsc75xx_reset(dev); |
| |
| dev->net->netdev_ops = &smsc75xx_netdev_ops; |
| dev->net->ethtool_ops = &smsc75xx_ethtool_ops; |
| dev->net->flags |= IFF_MULTICAST; |
| dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; |
| return 0; |
| } |
| |
| static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| if (pdata) { |
| netif_dbg(dev, ifdown, dev->net, "free pdata"); |
| kfree(pdata); |
| pdata = NULL; |
| dev->data[0] = 0; |
| } |
| } |
| |
| static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb, |
| u32 rx_cmd_a, u32 rx_cmd_b) |
| { |
| if (!(dev->net->features & NETIF_F_RXCSUM) || |
| unlikely(rx_cmd_a & RX_CMD_A_LCSM)) { |
| skb->ip_summed = CHECKSUM_NONE; |
| } else { |
| skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT)); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| } |
| } |
| |
| static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| while (skb->len > 0) { |
| u32 rx_cmd_a, rx_cmd_b, align_count, size; |
| struct sk_buff *ax_skb; |
| unsigned char *packet; |
| |
| memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a)); |
| le32_to_cpus(&rx_cmd_a); |
| skb_pull(skb, 4); |
| |
| memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); |
| le32_to_cpus(&rx_cmd_b); |
| skb_pull(skb, 4 + NET_IP_ALIGN); |
| |
| packet = skb->data; |
| |
| /* get the packet length */ |
| size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN; |
| align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; |
| |
| if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { |
| netif_dbg(dev, rx_err, dev->net, |
| "Error rx_cmd_a=0x%08x", rx_cmd_a); |
| dev->net->stats.rx_errors++; |
| dev->net->stats.rx_dropped++; |
| |
| if (rx_cmd_a & RX_CMD_A_FCS) |
| dev->net->stats.rx_crc_errors++; |
| else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) |
| dev->net->stats.rx_frame_errors++; |
| } else { |
| /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ |
| if (unlikely(size > (ETH_FRAME_LEN + 12))) { |
| netif_dbg(dev, rx_err, dev->net, |
| "size err rx_cmd_a=0x%08x", rx_cmd_a); |
| return 0; |
| } |
| |
| /* last frame in this batch */ |
| if (skb->len == size) { |
| smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a, |
| rx_cmd_b); |
| |
| skb_trim(skb, skb->len - 4); /* remove fcs */ |
| skb->truesize = size + sizeof(struct sk_buff); |
| |
| return 1; |
| } |
| |
| ax_skb = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!ax_skb)) { |
| netdev_warn(dev->net, "Error allocating skb"); |
| return 0; |
| } |
| |
| ax_skb->len = size; |
| ax_skb->data = packet; |
| skb_set_tail_pointer(ax_skb, size); |
| |
| smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a, |
| rx_cmd_b); |
| |
| skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ |
| ax_skb->truesize = size + sizeof(struct sk_buff); |
| |
| usbnet_skb_return(dev, ax_skb); |
| } |
| |
| skb_pull(skb, size); |
| |
| /* padding bytes before the next frame starts */ |
| if (skb->len) |
| skb_pull(skb, align_count); |
| } |
| |
| if (unlikely(skb->len < 0)) { |
| netdev_warn(dev->net, "invalid rx length<0 %d", skb->len); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev, |
| struct sk_buff *skb, gfp_t flags) |
| { |
| u32 tx_cmd_a, tx_cmd_b; |
| |
| skb_linearize(skb); |
| |
| if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) { |
| struct sk_buff *skb2 = |
| skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS; |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL) |
| tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE; |
| |
| if (skb_is_gso(skb)) { |
| u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN); |
| tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS; |
| |
| tx_cmd_a |= TX_CMD_A_LSO; |
| } else { |
| tx_cmd_b = 0; |
| } |
| |
| skb_push(skb, 4); |
| cpu_to_le32s(&tx_cmd_b); |
| memcpy(skb->data, &tx_cmd_b, 4); |
| |
| skb_push(skb, 4); |
| cpu_to_le32s(&tx_cmd_a); |
| memcpy(skb->data, &tx_cmd_a, 4); |
| |
| return skb; |
| } |
| |
| static const struct driver_info smsc75xx_info = { |
| .description = "smsc75xx USB 2.0 Gigabit Ethernet", |
| .bind = smsc75xx_bind, |
| .unbind = smsc75xx_unbind, |
| .link_reset = smsc75xx_link_reset, |
| .reset = smsc75xx_reset, |
| .rx_fixup = smsc75xx_rx_fixup, |
| .tx_fixup = smsc75xx_tx_fixup, |
| .status = smsc75xx_status, |
| .flags = FLAG_ETHER | FLAG_SEND_ZLP, |
| }; |
| |
| static const struct usb_device_id products[] = { |
| { |
| /* SMSC7500 USB Gigabit Ethernet Device */ |
| USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500), |
| .driver_info = (unsigned long) &smsc75xx_info, |
| }, |
| { |
| /* SMSC7500 USB Gigabit Ethernet Device */ |
| USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505), |
| .driver_info = (unsigned long) &smsc75xx_info, |
| }, |
| { }, /* END */ |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver smsc75xx_driver = { |
| .name = SMSC_CHIPNAME, |
| .id_table = products, |
| .probe = usbnet_probe, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| .disconnect = usbnet_disconnect, |
| }; |
| |
| static int __init smsc75xx_init(void) |
| { |
| return usb_register(&smsc75xx_driver); |
| } |
| module_init(smsc75xx_init); |
| |
| static void __exit smsc75xx_exit(void) |
| { |
| usb_deregister(&smsc75xx_driver); |
| } |
| module_exit(smsc75xx_exit); |
| |
| MODULE_AUTHOR("Nancy Lin"); |
| MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>"); |
| MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices"); |
| MODULE_LICENSE("GPL"); |