staging/rdma: remove deprecated ipath driver
This driver was moved to staging for eventual deletion. Time
to complete that task.
Signed-off-by: Doug Ledford <dledford@redhat.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index d1aeb1d..5c889cd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5795,12 +5795,6 @@
S: Maintained
F: net/ipv4/netfilter/ipt_MASQUERADE.c
-IPATH DRIVER
-M: Mike Marciniszyn <infinipath@intel.com>
-L: linux-rdma@vger.kernel.org
-S: Maintained
-F: drivers/staging/rdma/ipath/
-
IPMI SUBSYSTEM
M: Corey Minyard <minyard@acm.org>
L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
diff --git a/drivers/staging/rdma/Kconfig b/drivers/staging/rdma/Kconfig
index 8a0be69..f1f3eca 100644
--- a/drivers/staging/rdma/Kconfig
+++ b/drivers/staging/rdma/Kconfig
@@ -24,6 +24,4 @@
source "drivers/staging/rdma/hfi1/Kconfig"
-source "drivers/staging/rdma/ipath/Kconfig"
-
endif
diff --git a/drivers/staging/rdma/Makefile b/drivers/staging/rdma/Makefile
index 08e1919..8c7fc1d 100644
--- a/drivers/staging/rdma/Makefile
+++ b/drivers/staging/rdma/Makefile
@@ -1,3 +1,2 @@
# Entries for RDMA_STAGING tree
obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/
-obj-$(CONFIG_INFINIBAND_IPATH) += ipath/
diff --git a/drivers/staging/rdma/ipath/Kconfig b/drivers/staging/rdma/ipath/Kconfig
deleted file mode 100644
index 041ce06..0000000
--- a/drivers/staging/rdma/ipath/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config INFINIBAND_IPATH
- tristate "QLogic HTX HCA support"
- depends on 64BIT && NET && HT_IRQ
- ---help---
- This is a driver for the deprecated QLogic Hyper-Transport
- IB host channel adapter (model QHT7140),
- including InfiniBand verbs support. This driver allows these
- devices to be used with both kernel upper level protocols such
- as IP-over-InfiniBand as well as with userspace applications
- (in conjunction with InfiniBand userspace access).
- For QLogic PCIe QLE based cards, use the QIB driver instead.
-
- If you have this hardware you will need to boot with PAT disabled
- on your x86-64 systems, use the nopat kernel parameter.
-
- Note that this driver will soon be removed entirely from the kernel.
diff --git a/drivers/staging/rdma/ipath/Makefile b/drivers/staging/rdma/ipath/Makefile
deleted file mode 100644
index 4496f28..0000000
--- a/drivers/staging/rdma/ipath/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-ccflags-y := -DIPATH_IDSTR='"QLogic kernel.org driver"' \
- -DIPATH_KERN_TYPE=0
-
-obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
-
-ib_ipath-y := \
- ipath_cq.o \
- ipath_diag.o \
- ipath_dma.o \
- ipath_driver.o \
- ipath_eeprom.o \
- ipath_file_ops.o \
- ipath_fs.o \
- ipath_init_chip.o \
- ipath_intr.o \
- ipath_keys.o \
- ipath_mad.o \
- ipath_mmap.o \
- ipath_mr.o \
- ipath_qp.o \
- ipath_rc.o \
- ipath_ruc.o \
- ipath_sdma.o \
- ipath_srq.o \
- ipath_stats.o \
- ipath_sysfs.o \
- ipath_uc.o \
- ipath_ud.o \
- ipath_user_pages.o \
- ipath_user_sdma.o \
- ipath_verbs_mcast.o \
- ipath_verbs.o
-
-ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
-
-ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
-ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff --git a/drivers/staging/rdma/ipath/TODO b/drivers/staging/rdma/ipath/TODO
deleted file mode 100644
index cb00158..0000000
--- a/drivers/staging/rdma/ipath/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-The ipath driver has been moved to staging in preparation for its removal in a
-few releases. The driver will be deleted during the 4.6 merge window.
-
-Contact Dennis Dalessandro <dennis.dalessandro@intel.com> and
-Cc: linux-rdma@vger.kernel.org
diff --git a/drivers/staging/rdma/ipath/ipath_common.h b/drivers/staging/rdma/ipath/ipath_common.h
deleted file mode 100644
index 28cfe97..0000000
--- a/drivers/staging/rdma/ipath/ipath_common.h
+++ /dev/null
@@ -1,851 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_COMMON_H
-#define _IPATH_COMMON_H
-
-/*
- * This file contains defines, structures, etc. that are used
- * to communicate between kernel and user code.
- */
-
-
-/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
-#define IPATH_SRC_OUI_1 0x00
-#define IPATH_SRC_OUI_2 0x11
-#define IPATH_SRC_OUI_3 0x75
-
-/* version of protocol header (known to chip also). In the long run,
- * we should be able to generate and accept a range of version numbers;
- * for now we only accept one, and it's compiled in.
- */
-#define IPS_PROTO_VERSION 2
-
-/*
- * These are compile time constants that you may want to enable or disable
- * if you are trying to debug problems with code or performance.
- * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
- * fastpath code
- * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
- * traced in faspath code
- * _IPATH_TRACING define as 0 if you want to remove all tracing in a
- * compilation unit
- * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
- */
-
-/*
- * The value in the BTH QP field that InfiniPath uses to differentiate
- * an infinipath protocol IB packet vs standard IB transport
- */
-#define IPATH_KD_QP 0x656b79
-
-/*
- * valid states passed to ipath_set_linkstate() user call
- */
-#define IPATH_IB_LINKDOWN 0
-#define IPATH_IB_LINKARM 1
-#define IPATH_IB_LINKACTIVE 2
-#define IPATH_IB_LINKDOWN_ONLY 3
-#define IPATH_IB_LINKDOWN_SLEEP 4
-#define IPATH_IB_LINKDOWN_DISABLE 5
-#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
-#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
-#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */
-#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */
-
-/*
- * These 3 values (SDR and DDR may be ORed for auto-speed
- * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
- * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
- * The values were chosen to match values used within the IB spec.
- */
-#define IPATH_IB_SDR 1
-#define IPATH_IB_DDR 2
-
-/*
- * stats maintained by the driver. For now, at least, this is global
- * to all minor devices.
- */
-struct infinipath_stats {
- /* number of interrupts taken */
- __u64 sps_ints;
- /* number of interrupts for errors */
- __u64 sps_errints;
- /* number of errors from chip (not incl. packet errors or CRC) */
- __u64 sps_errs;
- /* number of packet errors from chip other than CRC */
- __u64 sps_pkterrs;
- /* number of packets with CRC errors (ICRC and VCRC) */
- __u64 sps_crcerrs;
- /* number of hardware errors reported (parity, etc.) */
- __u64 sps_hwerrs;
- /* number of times IB link changed state unexpectedly */
- __u64 sps_iblink;
- __u64 sps_unused; /* was fastrcvint, no longer implemented */
- /* number of kernel (port0) packets received */
- __u64 sps_port0pkts;
- /* number of "ethernet" packets sent by driver */
- __u64 sps_ether_spkts;
- /* number of "ethernet" packets received by driver */
- __u64 sps_ether_rpkts;
- /* number of SMA packets sent by driver. Obsolete. */
- __u64 sps_sma_spkts;
- /* number of SMA packets received by driver. Obsolete. */
- __u64 sps_sma_rpkts;
- /* number of times all ports rcvhdrq was full and packet dropped */
- __u64 sps_hdrqfull;
- /* number of times all ports egrtid was full and packet dropped */
- __u64 sps_etidfull;
- /*
- * number of times we tried to send from driver, but no pio buffers
- * avail
- */
- __u64 sps_nopiobufs;
- /* number of ports currently open */
- __u64 sps_ports;
- /* list of pkeys (other than default) accepted (0 means not set) */
- __u16 sps_pkeys[4];
- __u16 sps_unused16[4]; /* available; maintaining compatible layout */
- /* number of user ports per chip (not IB ports) */
- __u32 sps_nports;
- /* not our interrupt, or already handled */
- __u32 sps_nullintr;
- /* max number of packets handled per receive call */
- __u32 sps_maxpkts_call;
- /* avg number of packets handled per receive call */
- __u32 sps_avgpkts_call;
- /* total number of pages locked */
- __u64 sps_pagelocks;
- /* total number of pages unlocked */
- __u64 sps_pageunlocks;
- /*
- * Number of packets dropped in kernel other than errors (ether
- * packets if ipath not configured, etc.)
- */
- __u64 sps_krdrops;
- __u64 sps_txeparity; /* PIO buffer parity error, recovered */
- /* pad for future growth */
- __u64 __sps_pad[45];
-};
-
-/*
- * These are the status bits readable (in ascii form, 64bit value)
- * from the "status" sysfs file.
- */
-#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
-#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
-/* Device has been disabled via admin request */
-#define IPATH_STATUS_ADMIN_DISABLED 0x4
-/* Chip has been found and initted */
-#define IPATH_STATUS_CHIP_PRESENT 0x20
-/* IB link is at ACTIVE, usable for data traffic */
-#define IPATH_STATUS_IB_READY 0x40
-/* link is configured, LID, MTU, etc. have been set */
-#define IPATH_STATUS_IB_CONF 0x80
-/* no link established, probably no cable */
-#define IPATH_STATUS_IB_NOCABLE 0x100
-/* A Fatal hardware error has occurred. */
-#define IPATH_STATUS_HWERROR 0x200
-
-/*
- * The list of usermode accessible registers. Also see Reg_* later in file.
- */
-typedef enum _ipath_ureg {
- /* (RO) DMA RcvHdr to be used next. */
- ur_rcvhdrtail = 0,
- /* (RW) RcvHdr entry to be processed next by host. */
- ur_rcvhdrhead = 1,
- /* (RO) Index of next Eager index to use. */
- ur_rcvegrindextail = 2,
- /* (RW) Eager TID to be processed next */
- ur_rcvegrindexhead = 3,
- /* For internal use only; max register number. */
- _IPATH_UregMax
-} ipath_ureg;
-
-/* bit values for spi_runtime_flags */
-#define IPATH_RUNTIME_HT 0x1
-#define IPATH_RUNTIME_PCIE 0x2
-#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
-#define IPATH_RUNTIME_RCVHDR_COPY 0x8
-#define IPATH_RUNTIME_MASTER 0x10
-#define IPATH_RUNTIME_NODMA_RTAIL 0x80
-#define IPATH_RUNTIME_SDMA 0x200
-#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400
-#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800
-
-/*
- * This structure is returned by ipath_userinit() immediately after
- * open to get implementation-specific info, and info specific to this
- * instance.
- *
- * This struct must have explict pad fields where type sizes
- * may result in different alignments between 32 and 64 bit
- * programs, since the 64 bit * bit kernel requires the user code
- * to have matching offsets
- */
-struct ipath_base_info {
- /* version of hardware, for feature checking. */
- __u32 spi_hw_version;
- /* version of software, for feature checking. */
- __u32 spi_sw_version;
- /* InfiniPath port assigned, goes into sent packets */
- __u16 spi_port;
- __u16 spi_subport;
- /*
- * IB MTU, packets IB data must be less than this.
- * The MTU is in bytes, and will be a multiple of 4 bytes.
- */
- __u32 spi_mtu;
- /*
- * Size of a PIO buffer. Any given packet's total size must be less
- * than this (in words). Included is the starting control word, so
- * if 513 is returned, then total pkt size is 512 words or less.
- */
- __u32 spi_piosize;
- /* size of the TID cache in infinipath, in entries */
- __u32 spi_tidcnt;
- /* size of the TID Eager list in infinipath, in entries */
- __u32 spi_tidegrcnt;
- /* size of a single receive header queue entry in words. */
- __u32 spi_rcvhdrent_size;
- /*
- * Count of receive header queue entries allocated.
- * This may be less than the spu_rcvhdrcnt passed in!.
- */
- __u32 spi_rcvhdr_cnt;
-
- /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
- __u32 spi_runtime_flags;
-
- /* address where receive buffer queue is mapped into */
- __u64 spi_rcvhdr_base;
-
- /* user program. */
-
- /* base address of eager TID receive buffers. */
- __u64 spi_rcv_egrbufs;
-
- /* Allocated by initialization code, not by protocol. */
-
- /*
- * Size of each TID buffer in host memory, starting at
- * spi_rcv_egrbufs. The buffers are virtually contiguous.
- */
- __u32 spi_rcv_egrbufsize;
- /*
- * The special QP (queue pair) value that identifies an infinipath
- * protocol packet from standard IB packets. More, probably much
- * more, to be added.
- */
- __u32 spi_qpair;
-
- /*
- * User register base for init code, not to be used directly by
- * protocol or applications.
- */
- __u64 __spi_uregbase;
- /*
- * Maximum buffer size in bytes that can be used in a single TID
- * entry (assuming the buffer is aligned to this boundary). This is
- * the minimum of what the hardware and software support Guaranteed
- * to be a power of 2.
- */
- __u32 spi_tid_maxsize;
- /*
- * alignment of each pio send buffer (byte count
- * to add to spi_piobufbase to get to second buffer)
- */
- __u32 spi_pioalign;
- /*
- * The index of the first pio buffer available to this process;
- * needed to do lookup in spi_pioavailaddr; not added to
- * spi_piobufbase.
- */
- __u32 spi_pioindex;
- /* number of buffers mapped for this process */
- __u32 spi_piocnt;
-
- /*
- * Base address of writeonly pio buffers for this process.
- * Each buffer has spi_piosize words, and is aligned on spi_pioalign
- * boundaries. spi_piocnt buffers are mapped from this address
- */
- __u64 spi_piobufbase;
-
- /*
- * Base address of readonly memory copy of the pioavail registers.
- * There are 2 bits for each buffer.
- */
- __u64 spi_pioavailaddr;
-
- /*
- * Address where driver updates a copy of the interface and driver
- * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
- * string indicating hardware error, if there was one.
- */
- __u64 spi_status;
-
- /* number of chip ports available to user processes */
- __u32 spi_nports;
- /* unit number of chip we are using */
- __u32 spi_unit;
- /* num bufs in each contiguous set */
- __u32 spi_rcv_egrperchunk;
- /* size in bytes of each contiguous set */
- __u32 spi_rcv_egrchunksize;
- /* total size of mmap to cover full rcvegrbuffers */
- __u32 spi_rcv_egrbuftotlen;
- __u32 spi_filler_for_align;
- /* address of readonly memory copy of the rcvhdrq tail register. */
- __u64 spi_rcvhdr_tailaddr;
-
- /* shared memory pages for subports if port is shared */
- __u64 spi_subport_uregbase;
- __u64 spi_subport_rcvegrbuf;
- __u64 spi_subport_rcvhdr_base;
-
- /* shared memory page for hardware port if it is shared */
- __u64 spi_port_uregbase;
- __u64 spi_port_rcvegrbuf;
- __u64 spi_port_rcvhdr_base;
- __u64 spi_port_rcvhdr_tailaddr;
-
-} __attribute__ ((aligned(8)));
-
-
-/*
- * This version number is given to the driver by the user code during
- * initialization in the spu_userversion field of ipath_user_info, so
- * the driver can check for compatibility with user code.
- *
- * The major version changes when data structures
- * change in an incompatible way. The driver must be the same or higher
- * for initialization to succeed. In some cases, a higher version
- * driver will not interoperate with older software, and initialization
- * will return an error.
- */
-#define IPATH_USER_SWMAJOR 1
-
-/*
- * Minor version differences are always compatible
- * a within a major version, however if user software is larger
- * than driver software, some new features and/or structure fields
- * may not be implemented; the user code must deal with this if it
- * cares, or it must abort after initialization reports the difference.
- */
-#define IPATH_USER_SWMINOR 6
-
-#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
-
-#define IPATH_KERN_TYPE 0
-
-/*
- * Similarly, this is the kernel version going back to the user. It's
- * slightly different, in that we want to tell if the driver was built as
- * part of a QLogic release, or from the driver from openfabrics.org,
- * kernel.org, or a standard distribution, for support reasons.
- * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
- *
- * It's returned by the driver to the user code during initialization in the
- * spi_sw_version field of ipath_base_info, so the user code can in turn
- * check for compatibility with the kernel.
-*/
-#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
-
-/*
- * This structure is passed to ipath_userinit() to tell the driver where
- * user code buffers are, sizes, etc. The offsets and sizes of the
- * fields must remain unchanged, for binary compatibility. It can
- * be extended, if userversion is changed so user code can tell, if needed
- */
-struct ipath_user_info {
- /*
- * version of user software, to detect compatibility issues.
- * Should be set to IPATH_USER_SWVERSION.
- */
- __u32 spu_userversion;
-
- /* desired number of receive header queue entries */
- __u32 spu_rcvhdrcnt;
-
- /* size of struct base_info to write to */
- __u32 spu_base_info_size;
-
- /*
- * number of words in KD protocol header
- * This tells InfiniPath how many words to copy to rcvhdrq. If 0,
- * kernel uses a default. Once set, attempts to set any other value
- * are an error (EAGAIN) until driver is reloaded.
- */
- __u32 spu_rcvhdrsize;
-
- /*
- * If two or more processes wish to share a port, each process
- * must set the spu_subport_cnt and spu_subport_id to the same
- * values. The only restriction on the spu_subport_id is that
- * it be unique for a given node.
- */
- __u16 spu_subport_cnt;
- __u16 spu_subport_id;
-
- __u32 spu_unused; /* kept for compatible layout */
-
- /*
- * address of struct base_info to write to
- */
- __u64 spu_base_info;
-
-} __attribute__ ((aligned(8)));
-
-/* User commands. */
-
-#define IPATH_CMD_MIN 16
-
-#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */
-#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
-#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
-#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
-#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
-#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
-#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */
-#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */
-#define IPATH_CMD_USER_INIT 24 /* set up userspace */
-#define IPATH_CMD_UNUSED_1 25
-#define IPATH_CMD_UNUSED_2 26
-#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
-#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
-#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
-/* 30 is unused */
-#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
-#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
-
-/*
- * Poll types
- */
-#define IPATH_POLL_TYPE_URGENT 0x01
-#define IPATH_POLL_TYPE_OVERFLOW 0x02
-
-struct ipath_port_info {
- __u32 num_active; /* number of active units */
- __u32 unit; /* unit (chip) assigned to caller */
- __u16 port; /* port on unit assigned to caller */
- __u16 subport; /* subport on unit assigned to caller */
- __u16 num_ports; /* number of ports available on unit */
- __u16 num_subports; /* number of subports opened on port */
-};
-
-struct ipath_tid_info {
- __u32 tidcnt;
- /* make structure same size in 32 and 64 bit */
- __u32 tid__unused;
- /* virtual address of first page in transfer */
- __u64 tidvaddr;
- /* pointer (same size 32/64 bit) to __u16 tid array */
- __u64 tidlist;
-
- /*
- * pointer (same size 32/64 bit) to bitmap of TIDs used
- * for this call; checked for being large enough at open
- */
- __u64 tidmap;
-};
-
-struct ipath_cmd {
- __u32 type; /* command type */
- union {
- struct ipath_tid_info tid_info;
- struct ipath_user_info user_info;
-
- /*
- * address in userspace where we should put the sdma
- * inflight counter
- */
- __u64 sdma_inflight;
- /*
- * address in userspace where we should put the sdma
- * completion counter
- */
- __u64 sdma_complete;
- /* address in userspace of struct ipath_port_info to
- write result to */
- __u64 port_info;
- /* enable/disable receipt of packets */
- __u32 recv_ctrl;
- /* enable/disable armlaunch errors (non-zero to enable) */
- __u32 armlaunch_ctrl;
- /* partition key to set */
- __u16 part_key;
- /* user address of __u32 bitmask of active slaves */
- __u64 slave_mask_addr;
- /* type of polling we want */
- __u16 poll_type;
- } cmd;
-};
-
-struct ipath_iovec {
- /* Pointer to data, but same size 32 and 64 bit */
- __u64 iov_base;
-
- /*
- * Length of data; don't need 64 bits, but want
- * ipath_sendpkt to remain same size as before 32 bit changes, so...
- */
- __u64 iov_len;
-};
-
-/*
- * Describes a single packet for send. Each packet can have one or more
- * buffers, but the total length (exclusive of IB headers) must be less
- * than the MTU, and if using the PIO method, entire packet length,
- * including IB headers, must be less than the ipath_piosize value (words).
- * Use of this necessitates including sys/uio.h
- */
-struct __ipath_sendpkt {
- __u32 sps_flags; /* flags for packet (TBD) */
- __u32 sps_cnt; /* number of entries to use in sps_iov */
- /* array of iov's describing packet. TEMPORARY */
- struct ipath_iovec sps_iov[4];
-};
-
-/*
- * diagnostics can send a packet by "writing" one of the following
- * two structs to diag data special file
- * The first is the legacy version for backward compatibility
- */
-struct ipath_diag_pkt {
- __u32 unit;
- __u64 data;
- __u32 len;
-};
-
-/* The second diag_pkt struct is the expanded version that allows
- * more control over the packet, specifically, by allowing a custom
- * pbc (+ static rate) qword, so that special modes and deliberate
- * changes to CRCs can be used. The elements were also re-ordered
- * for better alignment and to avoid padding issues.
- */
-struct ipath_diag_xpkt {
- __u64 data;
- __u64 pbc_wd;
- __u32 unit;
- __u32 len;
-};
-
-/*
- * Data layout in I2C flash (for GUID, etc.)
- * All fields are little-endian binary unless otherwise stated
- */
-#define IPATH_FLASH_VERSION 2
-struct ipath_flash {
- /* flash layout version (IPATH_FLASH_VERSION) */
- __u8 if_fversion;
- /* checksum protecting if_length bytes */
- __u8 if_csum;
- /*
- * valid length (in use, protected by if_csum), including
- * if_fversion and if_csum themselves)
- */
- __u8 if_length;
- /* the GUID, in network order */
- __u8 if_guid[8];
- /* number of GUIDs to use, starting from if_guid */
- __u8 if_numguid;
- /* the (last 10 characters of) board serial number, in ASCII */
- char if_serial[12];
- /* board mfg date (YYYYMMDD ASCII) */
- char if_mfgdate[8];
- /* last board rework/test date (YYYYMMDD ASCII) */
- char if_testdate[8];
- /* logging of error counts, TBD */
- __u8 if_errcntp[4];
- /* powered on hours, updated at driver unload */
- __u8 if_powerhour[2];
- /* ASCII free-form comment field */
- char if_comment[32];
- /* Backwards compatible prefix for longer QLogic Serial Numbers */
- char if_sprefix[4];
- /* 82 bytes used, min flash size is 128 bytes */
- __u8 if_future[46];
-};
-
-/*
- * These are the counters implemented in the chip, and are listed in order.
- * The InterCaps naming is taken straight from the chip spec.
- */
-struct infinipath_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 TxSDmaDescCnt; /* was Reserved1 */
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
- __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
- __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
- /* The following are new for IBA7220 */
- __u64 RxVL15DroppedPktCnt;
- __u64 RxOtherLocalPhyErrCnt;
- __u64 PcieRetryBufDiagQwordCnt;
- __u64 ExcessBufferOvflCnt;
- __u64 LocalLinkIntegrityErrCnt;
- __u64 RxVlErrCnt;
- __u64 RxDlidFltrCnt;
-};
-
-/*
- * The next set of defines are for packet headers, and chip register
- * and memory bits that are visible to and/or used by user-mode software
- * The other bits that are used only by the driver or diags are in
- * ipath_registers.h
- */
-
-/* RcvHdrFlags bits */
-#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
-#define INFINIPATH_RHF_LENGTH_SHIFT 0
-#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
-#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
-#define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF
-#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
-#define INFINIPATH_RHF_SEQ_MASK 0xF
-#define INFINIPATH_RHF_SEQ_SHIFT 0
-#define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF
-#define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4
-#define INFINIPATH_RHF_H_ICRCERR 0x80000000
-#define INFINIPATH_RHF_H_VCRCERR 0x40000000
-#define INFINIPATH_RHF_H_PARITYERR 0x20000000
-#define INFINIPATH_RHF_H_LENERR 0x10000000
-#define INFINIPATH_RHF_H_MTUERR 0x08000000
-#define INFINIPATH_RHF_H_IHDRERR 0x04000000
-#define INFINIPATH_RHF_H_TIDERR 0x02000000
-#define INFINIPATH_RHF_H_MKERR 0x01000000
-#define INFINIPATH_RHF_H_IBERR 0x00800000
-#define INFINIPATH_RHF_H_ERR_MASK 0xFF800000
-#define INFINIPATH_RHF_L_USE_EGR 0x80000000
-#define INFINIPATH_RHF_L_SWA 0x00008000
-#define INFINIPATH_RHF_L_SWB 0x00004000
-
-/* infinipath header fields */
-#define INFINIPATH_I_VERS_MASK 0xF
-#define INFINIPATH_I_VERS_SHIFT 28
-#define INFINIPATH_I_PORT_MASK 0xF
-#define INFINIPATH_I_PORT_SHIFT 24
-#define INFINIPATH_I_TID_MASK 0x7FF
-#define INFINIPATH_I_TID_SHIFT 13
-#define INFINIPATH_I_OFFSET_MASK 0x1FFF
-#define INFINIPATH_I_OFFSET_SHIFT 0
-
-/* K_PktFlags bits */
-#define INFINIPATH_KPF_INTR 0x1
-#define INFINIPATH_KPF_SUBPORT_MASK 0x3
-#define INFINIPATH_KPF_SUBPORT_SHIFT 1
-
-#define INFINIPATH_MAX_SUBPORT 4
-
-/* SendPIO per-buffer control */
-#define INFINIPATH_SP_TEST 0x40
-#define INFINIPATH_SP_TESTEBP 0x20
-#define INFINIPATH_SP_TRIGGER_SHIFT 15
-
-/* SendPIOAvail bits */
-#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
-#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
-
-/* infinipath header format */
-struct ipath_header {
- /*
- * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
- * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
- * Port 4, TID 11, offset 13.
- */
- __le32 ver_port_tid_offset;
- __le16 chksum;
- __le16 pkt_flags;
-};
-
-/* infinipath user message header format.
- * This structure contains the first 4 fields common to all protocols
- * that employ infinipath.
- */
-struct ipath_message_header {
- __be16 lrh[4];
- __be32 bth[3];
- /* fields below this point are in host byte order */
- struct ipath_header iph;
- __u8 sub_opcode;
-};
-
-/* infinipath ethernet header format */
-struct ether_header {
- __be16 lrh[4];
- __be32 bth[3];
- struct ipath_header iph;
- __u8 sub_opcode;
- __u8 cmd;
- __be16 lid;
- __u16 mac[3];
- __u8 frag_num;
- __u8 seq_num;
- __le32 len;
- /* MUST be of word size due to PIO write requirements */
- __le32 csum;
- __le16 csum_offset;
- __le16 flags;
- __u16 first_2_bytes;
- __u8 unused[2]; /* currently unused */
-};
-
-
-/* IB - LRH header consts */
-#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
-#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
-
-/* misc. */
-#define SIZE_OF_CRC 1
-
-#define IPATH_DEFAULT_P_KEY 0xFFFF
-#define IPATH_PERMISSIVE_LID 0xFFFF
-#define IPATH_AETH_CREDIT_SHIFT 24
-#define IPATH_AETH_CREDIT_MASK 0x1F
-#define IPATH_AETH_CREDIT_INVAL 0x1F
-#define IPATH_PSN_MASK 0xFFFFFF
-#define IPATH_MSN_MASK 0xFFFFFF
-#define IPATH_QPN_MASK 0xFFFFFF
-#define IPATH_MULTICAST_LID_BASE 0xC000
-#define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK
-#define IPATH_MULTICAST_QPN 0xFFFFFF
-
-/* Receive Header Queue: receive type (from infinipath) */
-#define RCVHQ_RCV_TYPE_EXPECTED 0
-#define RCVHQ_RCV_TYPE_EAGER 1
-#define RCVHQ_RCV_TYPE_NON_KD 2
-#define RCVHQ_RCV_TYPE_ERROR 3
-
-
-/* sub OpCodes - ith4x */
-#define IPATH_ITH4X_OPCODE_ENCAP 0x81
-#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
-
-#define IPATH_HEADER_QUEUE_WORDS 9
-
-/* functions for extracting fields from rcvhdrq entries for the driver.
- */
-static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
-{
- return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK;
-}
-
-static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
- & INFINIPATH_RHF_RCVTYPE_MASK;
-}
-
-static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
-{
- return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
- & INFINIPATH_RHF_LENGTH_MASK) << 2;
-}
-
-static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
- & INFINIPATH_RHF_EGRINDEX_MASK;
-}
-
-static inline __u32 ipath_hdrget_seq(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT)
- & INFINIPATH_RHF_SEQ_MASK;
-}
-
-static inline __u32 ipath_hdrget_offset(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT)
- & INFINIPATH_RHF_HDRQ_OFFSET_MASK;
-}
-
-static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf)
-{
- return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR;
-}
-
-static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
-{
- return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
- & INFINIPATH_I_VERS_MASK;
-}
-
-#endif /* _IPATH_COMMON_H */
diff --git a/drivers/staging/rdma/ipath/ipath_cq.c b/drivers/staging/rdma/ipath/ipath_cq.c
deleted file mode 100644
index e9dd911..0000000
--- a/drivers/staging/rdma/ipath/ipath_cq.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_cq_enter - add a new entry to the completion queue
- * @cq: completion queue
- * @entry: work completion entry to add
- * @sig: true if @entry is a solicitated entry
- *
- * This may be called with qp->s_lock held.
- */
-void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int solicited)
-{
- struct ipath_cq_wc *wc;
- unsigned long flags;
- u32 head;
- u32 next;
-
- spin_lock_irqsave(&cq->lock, flags);
-
- /*
- * Note that the head pointer might be writable by user processes.
- * Take care to verify it is a sane value.
- */
- wc = cq->queue;
- head = wc->head;
- if (head >= (unsigned) cq->ibcq.cqe) {
- head = cq->ibcq.cqe;
- next = 0;
- } else
- next = head + 1;
- if (unlikely(next == wc->tail)) {
- spin_unlock_irqrestore(&cq->lock, flags);
- if (cq->ibcq.event_handler) {
- struct ib_event ev;
-
- ev.device = cq->ibcq.device;
- ev.element.cq = &cq->ibcq;
- ev.event = IB_EVENT_CQ_ERR;
- cq->ibcq.event_handler(&ev, cq->ibcq.cq_context);
- }
- return;
- }
- if (cq->ip) {
- wc->uqueue[head].wr_id = entry->wr_id;
- wc->uqueue[head].status = entry->status;
- wc->uqueue[head].opcode = entry->opcode;
- wc->uqueue[head].vendor_err = entry->vendor_err;
- wc->uqueue[head].byte_len = entry->byte_len;
- wc->uqueue[head].ex.imm_data = (__u32 __force) entry->ex.imm_data;
- wc->uqueue[head].qp_num = entry->qp->qp_num;
- wc->uqueue[head].src_qp = entry->src_qp;
- wc->uqueue[head].wc_flags = entry->wc_flags;
- wc->uqueue[head].pkey_index = entry->pkey_index;
- wc->uqueue[head].slid = entry->slid;
- wc->uqueue[head].sl = entry->sl;
- wc->uqueue[head].dlid_path_bits = entry->dlid_path_bits;
- wc->uqueue[head].port_num = entry->port_num;
- /* Make sure entry is written before the head index. */
- smp_wmb();
- } else
- wc->kqueue[head] = *entry;
- wc->head = next;
-
- if (cq->notify == IB_CQ_NEXT_COMP ||
- (cq->notify == IB_CQ_SOLICITED && solicited)) {
- cq->notify = IB_CQ_NONE;
- cq->triggered++;
- /*
- * This will cause send_complete() to be called in
- * another thread.
- */
- tasklet_hi_schedule(&cq->comptask);
- }
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
- if (entry->status != IB_WC_SUCCESS)
- to_idev(cq->ibcq.device)->n_wqe_errs++;
-}
-
-/**
- * ipath_poll_cq - poll for work completion entries
- * @ibcq: the completion queue to poll
- * @num_entries: the maximum number of entries to return
- * @entry: pointer to array where work completions are placed
- *
- * Returns the number of completion entries polled.
- *
- * This may be called from interrupt context. Also called by ib_poll_cq()
- * in the generic verbs code.
- */
-int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- struct ipath_cq_wc *wc;
- unsigned long flags;
- int npolled;
- u32 tail;
-
- /* The kernel can only poll a kernel completion queue */
- if (cq->ip) {
- npolled = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&cq->lock, flags);
-
- wc = cq->queue;
- tail = wc->tail;
- if (tail > (u32) cq->ibcq.cqe)
- tail = (u32) cq->ibcq.cqe;
- for (npolled = 0; npolled < num_entries; ++npolled, ++entry) {
- if (tail == wc->head)
- break;
- /* The kernel doesn't need a RMB since it has the lock. */
- *entry = wc->kqueue[tail];
- if (tail >= cq->ibcq.cqe)
- tail = 0;
- else
- tail++;
- }
- wc->tail = tail;
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
-bail:
- return npolled;
-}
-
-static void send_complete(unsigned long data)
-{
- struct ipath_cq *cq = (struct ipath_cq *)data;
-
- /*
- * The completion handler will most likely rearm the notification
- * and poll for all pending entries. If a new completion entry
- * is added while we are in this routine, tasklet_hi_schedule()
- * won't call us again until we return so we check triggered to
- * see if we need to call the handler again.
- */
- for (;;) {
- u8 triggered = cq->triggered;
-
- cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context);
-
- if (cq->triggered == triggered)
- return;
- }
-}
-
-/**
- * ipath_create_cq - create a completion queue
- * @ibdev: the device this completion queue is attached to
- * @attr: creation attributes
- * @context: unused by the InfiniPath driver
- * @udata: unused by the InfiniPath driver
- *
- * Returns a pointer to the completion queue or negative errno values
- * for failure.
- *
- * Called by ib_create_cq() in the generic verbs code.
- */
-struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
- const struct ib_cq_init_attr *attr,
- struct ib_ucontext *context,
- struct ib_udata *udata)
-{
- int entries = attr->cqe;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cq *cq;
- struct ipath_cq_wc *wc;
- struct ib_cq *ret;
- u32 sz;
-
- if (attr->flags)
- return ERR_PTR(-EINVAL);
-
- if (entries < 1 || entries > ib_ipath_max_cqes) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- /* Allocate the completion queue structure. */
- cq = kmalloc(sizeof(*cq), GFP_KERNEL);
- if (!cq) {
- ret = ERR_PTR(-ENOMEM);
- goto done;
- }
-
- /*
- * Allocate the completion queue entries and head/tail pointers.
- * This is allocated separately so that it can be resized and
- * also mapped into user space.
- * We need to use vmalloc() in order to support mmap and large
- * numbers of entries.
- */
- sz = sizeof(*wc);
- if (udata && udata->outlen >= sizeof(__u64))
- sz += sizeof(struct ib_uverbs_wc) * (entries + 1);
- else
- sz += sizeof(struct ib_wc) * (entries + 1);
- wc = vmalloc_user(sz);
- if (!wc) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_cq;
- }
-
- /*
- * Return the address of the WC as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- int err;
-
- cq->ip = ipath_create_mmap_info(dev, sz, context, wc);
- if (!cq->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_wc;
- }
-
- err = ib_copy_to_udata(udata, &cq->ip->offset,
- sizeof(cq->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else
- cq->ip = NULL;
-
- spin_lock(&dev->n_cqs_lock);
- if (dev->n_cqs_allocated == ib_ipath_max_cqs) {
- spin_unlock(&dev->n_cqs_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_cqs_allocated++;
- spin_unlock(&dev->n_cqs_lock);
-
- if (cq->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&cq->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- /*
- * ib_create_cq() will initialize cq->ibcq except for cq->ibcq.cqe.
- * The number of entries should be >= the number requested or return
- * an error.
- */
- cq->ibcq.cqe = entries;
- cq->notify = IB_CQ_NONE;
- cq->triggered = 0;
- spin_lock_init(&cq->lock);
- tasklet_init(&cq->comptask, send_complete, (unsigned long)cq);
- wc->head = 0;
- wc->tail = 0;
- cq->queue = wc;
-
- ret = &cq->ibcq;
-
- goto done;
-
-bail_ip:
- kfree(cq->ip);
-bail_wc:
- vfree(wc);
-bail_cq:
- kfree(cq);
-done:
- return ret;
-}
-
-/**
- * ipath_destroy_cq - destroy a completion queue
- * @ibcq: the completion queue to destroy.
- *
- * Returns 0 for success.
- *
- * Called by ib_destroy_cq() in the generic verbs code.
- */
-int ipath_destroy_cq(struct ib_cq *ibcq)
-{
- struct ipath_ibdev *dev = to_idev(ibcq->device);
- struct ipath_cq *cq = to_icq(ibcq);
-
- tasklet_kill(&cq->comptask);
- spin_lock(&dev->n_cqs_lock);
- dev->n_cqs_allocated--;
- spin_unlock(&dev->n_cqs_lock);
- if (cq->ip)
- kref_put(&cq->ip->ref, ipath_release_mmap_info);
- else
- vfree(cq->queue);
- kfree(cq);
-
- return 0;
-}
-
-/**
- * ipath_req_notify_cq - change the notification type for a completion queue
- * @ibcq: the completion queue
- * @notify_flags: the type of notification to request
- *
- * Returns 0 for success.
- *
- * This may be called from interrupt context. Also called by
- * ib_req_notify_cq() in the generic verbs code.
- */
-int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&cq->lock, flags);
- /*
- * Don't change IB_CQ_NEXT_COMP to IB_CQ_SOLICITED but allow
- * any other transitions (see C11-31 and C11-32 in ch. 11.4.2.2).
- */
- if (cq->notify != IB_CQ_NEXT_COMP)
- cq->notify = notify_flags & IB_CQ_SOLICITED_MASK;
-
- if ((notify_flags & IB_CQ_REPORT_MISSED_EVENTS) &&
- cq->queue->head != cq->queue->tail)
- ret = 1;
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
- return ret;
-}
-
-/**
- * ipath_resize_cq - change the size of the CQ
- * @ibcq: the completion queue
- *
- * Returns 0 for success.
- */
-int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- struct ipath_cq_wc *old_wc;
- struct ipath_cq_wc *wc;
- u32 head, tail, n;
- int ret;
- u32 sz;
-
- if (cqe < 1 || cqe > ib_ipath_max_cqes) {
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * Need to use vmalloc() if we want to support large #s of entries.
- */
- sz = sizeof(*wc);
- if (udata && udata->outlen >= sizeof(__u64))
- sz += sizeof(struct ib_uverbs_wc) * (cqe + 1);
- else
- sz += sizeof(struct ib_wc) * (cqe + 1);
- wc = vmalloc_user(sz);
- if (!wc) {
- ret = -ENOMEM;
- goto bail;
- }
-
- /* Check that we can write the offset to mmap. */
- if (udata && udata->outlen >= sizeof(__u64)) {
- __u64 offset = 0;
-
- ret = ib_copy_to_udata(udata, &offset, sizeof(offset));
- if (ret)
- goto bail_free;
- }
-
- spin_lock_irq(&cq->lock);
- /*
- * Make sure head and tail are sane since they
- * might be user writable.
- */
- old_wc = cq->queue;
- head = old_wc->head;
- if (head > (u32) cq->ibcq.cqe)
- head = (u32) cq->ibcq.cqe;
- tail = old_wc->tail;
- if (tail > (u32) cq->ibcq.cqe)
- tail = (u32) cq->ibcq.cqe;
- if (head < tail)
- n = cq->ibcq.cqe + 1 + head - tail;
- else
- n = head - tail;
- if (unlikely((u32)cqe < n)) {
- ret = -EINVAL;
- goto bail_unlock;
- }
- for (n = 0; tail != head; n++) {
- if (cq->ip)
- wc->uqueue[n] = old_wc->uqueue[tail];
- else
- wc->kqueue[n] = old_wc->kqueue[tail];
- if (tail == (u32) cq->ibcq.cqe)
- tail = 0;
- else
- tail++;
- }
- cq->ibcq.cqe = cqe;
- wc->head = n;
- wc->tail = 0;
- cq->queue = wc;
- spin_unlock_irq(&cq->lock);
-
- vfree(old_wc);
-
- if (cq->ip) {
- struct ipath_ibdev *dev = to_idev(ibcq->device);
- struct ipath_mmap_info *ip = cq->ip;
-
- ipath_update_mmap_info(dev, ip, sz, wc);
-
- /*
- * Return the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- ret = ib_copy_to_udata(udata, &ip->offset,
- sizeof(ip->offset));
- if (ret)
- goto bail;
- }
-
- spin_lock_irq(&dev->pending_lock);
- if (list_empty(&ip->pending_mmaps))
- list_add(&ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = 0;
- goto bail;
-
-bail_unlock:
- spin_unlock_irq(&cq->lock);
-bail_free:
- vfree(wc);
-bail:
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_debug.h b/drivers/staging/rdma/ipath/ipath_debug.h
deleted file mode 100644
index 65926cd..0000000
--- a/drivers/staging/rdma/ipath/ipath_debug.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_DEBUG_H
-#define _IPATH_DEBUG_H
-
-#ifndef _IPATH_DEBUGGING /* debugging enabled or not */
-#define _IPATH_DEBUGGING 1
-#endif
-
-#if _IPATH_DEBUGGING
-
-/*
- * Mask values for debugging. The scheme allows us to compile out any
- * of the debug tracing stuff, and if compiled in, to enable or disable
- * dynamically. This can be set at modprobe time also:
- * modprobe infinipath.ko infinipath_debug=7
- */
-
-#define __IPATH_INFO 0x1 /* generic low verbosity stuff */
-#define __IPATH_DBG 0x2 /* generic debug */
-#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */
-/* leave some low verbosity spots open */
-#define __IPATH_VERBDBG 0x40 /* very verbose debug */
-#define __IPATH_PKTDBG 0x80 /* print packet data */
-/* print process startup (init)/exit messages */
-#define __IPATH_PROCDBG 0x100
-/* print mmap/fault stuff, not using VDBG any more */
-#define __IPATH_MMDBG 0x200
-#define __IPATH_ERRPKTDBG 0x400
-#define __IPATH_USER_SEND 0x1000 /* use user mode send */
-#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
-#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
-#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) gen debug */
-#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings */
-#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
-#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
-#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
-#define __IPATH_LINKVERBDBG 0x200000 /* very verbose linkchange debug */
-
-#else /* _IPATH_DEBUGGING */
-
-/*
- * define all of these even with debugging off, for the few places that do
- * if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the
- * compiler eliminate the code
- */
-
-#define __IPATH_INFO 0x0 /* generic low verbosity stuff */
-#define __IPATH_DBG 0x0 /* generic debug */
-#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
-#define __IPATH_VERBDBG 0x0 /* very verbose debug */
-#define __IPATH_PKTDBG 0x0 /* print packet data */
-#define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */
-/* print mmap/fault stuff, not using VDBG any more */
-#define __IPATH_MMDBG 0x0
-#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
-#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
-#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
-#define __IPATH_LINKVERBDBG 0x0 /* very verbose linkchange debug */
-
-#endif /* _IPATH_DEBUGGING */
-
-#define __IPATH_VERBOSEDBG __IPATH_VERBDBG
-
-#endif /* _IPATH_DEBUG_H */
diff --git a/drivers/staging/rdma/ipath/ipath_diag.c b/drivers/staging/rdma/ipath/ipath_diag.c
deleted file mode 100644
index 45802e9..0000000
--- a/drivers/staging/rdma/ipath/ipath_diag.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains support for diagnostic functions. It is accessed by
- * opening the ipath_diag device, normally minor number 129. Diagnostic use
- * of the InfiniPath chip may render the chip or board unusable until the
- * driver is unloaded, or in some cases, until the system is rebooted.
- *
- * Accesses to the chip through this interface are not similar to going
- * through the /sys/bus/pci resource mmap interface.
- */
-
-#include <linux/io.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/export.h>
-#include <asm/uaccess.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-
-int ipath_diag_inuse;
-static int diag_set_link;
-
-static int ipath_diag_open(struct inode *in, struct file *fp);
-static int ipath_diag_release(struct inode *in, struct file *fp);
-static ssize_t ipath_diag_read(struct file *fp, char __user *data,
- size_t count, loff_t *off);
-static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off);
-
-static const struct file_operations diag_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_diag_write,
- .read = ipath_diag_read,
- .open = ipath_diag_open,
- .release = ipath_diag_release,
- .llseek = default_llseek,
-};
-
-static ssize_t ipath_diagpkt_write(struct file *fp,
- const char __user *data,
- size_t count, loff_t *off);
-
-static const struct file_operations diagpkt_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_diagpkt_write,
- .llseek = noop_llseek,
-};
-
-static atomic_t diagpkt_count = ATOMIC_INIT(0);
-static struct cdev *diagpkt_cdev;
-static struct device *diagpkt_dev;
-
-int ipath_diag_add(struct ipath_devdata *dd)
-{
- char name[16];
- int ret = 0;
-
- if (atomic_inc_return(&diagpkt_count) == 1) {
- ret = ipath_cdev_init(IPATH_DIAGPKT_MINOR,
- "ipath_diagpkt", &diagpkt_file_ops,
- &diagpkt_cdev, &diagpkt_dev);
-
- if (ret) {
- ipath_dev_err(dd, "Couldn't create ipath_diagpkt "
- "device: %d", ret);
- goto done;
- }
- }
-
- snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
-
- ret = ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
- &diag_file_ops, &dd->diag_cdev,
- &dd->diag_dev);
- if (ret)
- ipath_dev_err(dd, "Couldn't create %s device: %d",
- name, ret);
-
-done:
- return ret;
-}
-
-void ipath_diag_remove(struct ipath_devdata *dd)
-{
- if (atomic_dec_and_test(&diagpkt_count))
- ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_dev);
-
- ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_dev);
-}
-
-/**
- * ipath_read_umem64 - read a 64-bit quantity from the chip into user space
- * @dd: the infinipath device
- * @uaddr: the location to store the data in user memory
- * @caddr: the source chip address (full pointer, not offset)
- * @count: number of bytes to copy (multiple of 32 bits)
- *
- * This function also localizes all chip memory accesses.
- * The copy should be written such that we read full cacheline packets
- * from the chip. This is usually used for a single qword
- *
- * NOTE: This assumes the chip address is 64-bit aligned.
- */
-static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr,
- const void __iomem *caddr, size_t count)
-{
- const u64 __iomem *reg_addr = caddr;
- const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
- int ret;
-
- /* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u64 data = readq(reg_addr);
- if (copy_to_user(uaddr, &data, sizeof(u64))) {
- ret = -EFAULT;
- goto bail;
- }
- reg_addr++;
- uaddr += sizeof(u64);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_write_umem64 - write a 64-bit quantity to the chip from user space
- * @dd: the infinipath device
- * @caddr: the destination chip address (full pointer, not offset)
- * @uaddr: the source of the data in user memory
- * @count: the number of bytes to copy (multiple of 32 bits)
- *
- * This is usually used for a single qword
- * NOTE: This assumes the chip address is 64-bit aligned.
- */
-
-static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr,
- const void __user *uaddr, size_t count)
-{
- u64 __iomem *reg_addr = caddr;
- const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
- int ret;
-
- /* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u64 data;
- if (copy_from_user(&data, uaddr, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
- writeq(data, reg_addr);
-
- reg_addr++;
- uaddr += sizeof(u64);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_read_umem32 - read a 32-bit quantity from the chip into user space
- * @dd: the infinipath device
- * @uaddr: the location to store the data in user memory
- * @caddr: the source chip address (full pointer, not offset)
- * @count: number of bytes to copy
- *
- * read 32 bit values, not 64 bit; for memories that only
- * support 32 bit reads; usually a single dword.
- */
-static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr,
- const void __iomem *caddr, size_t count)
-{
- const u32 __iomem *reg_addr = caddr;
- const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
- int ret;
-
- if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
- reg_end > (u32 __iomem *) dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- /* not very efficient, but it works for now */
- while (reg_addr < reg_end) {
- u32 data = readl(reg_addr);
- if (copy_to_user(uaddr, &data, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
-
- reg_addr++;
- uaddr += sizeof(u32);
-
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_write_umem32 - write a 32-bit quantity to the chip from user space
- * @dd: the infinipath device
- * @caddr: the destination chip address (full pointer, not offset)
- * @uaddr: the source of the data in user memory
- * @count: number of bytes to copy
- *
- * write 32 bit values, not 64 bit; for memories that only
- * support 32 bit write; usually a single dword.
- */
-
-static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr,
- const void __user *uaddr, size_t count)
-{
- u32 __iomem *reg_addr = caddr;
- const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
- int ret;
-
- if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
- reg_end > (u32 __iomem *) dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u32 data;
- if (copy_from_user(&data, uaddr, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
- writel(data, reg_addr);
-
- reg_addr++;
- uaddr += sizeof(u32);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-static int ipath_diag_open(struct inode *in, struct file *fp)
-{
- int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
- struct ipath_devdata *dd;
- int ret;
-
- mutex_lock(&ipath_mutex);
-
- if (ipath_diag_inuse) {
- ret = -EBUSY;
- goto bail;
- }
-
- dd = ipath_lookup(unit);
-
- if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase) {
- ret = -ENODEV;
- goto bail;
- }
-
- fp->private_data = dd;
- ipath_diag_inuse = -2;
- diag_set_link = 0;
- ret = 0;
-
- /* Only expose a way to reset the device if we
- make it into diag mode. */
- ipath_expose_reset(&dd->pcidev->dev);
-
-bail:
- mutex_unlock(&ipath_mutex);
-
- return ret;
-}
-
-/**
- * ipath_diagpkt_write - write an IB packet
- * @fp: the diag data device file pointer
- * @data: ipath_diag_pkt structure saying where to get the packet
- * @count: size of data to write
- * @off: unused by this code
- */
-static ssize_t ipath_diagpkt_write(struct file *fp,
- const char __user *data,
- size_t count, loff_t *off)
-{
- u32 __iomem *piobuf;
- u32 plen, pbufn, maxlen_reserve;
- struct ipath_diag_pkt odp;
- struct ipath_diag_xpkt dp;
- u32 *tmpbuf = NULL;
- struct ipath_devdata *dd;
- ssize_t ret = 0;
- u64 val;
- u32 l_state, lt_state; /* LinkState, LinkTrainingState */
-
-
- if (count == sizeof(dp)) {
- if (copy_from_user(&dp, data, sizeof(dp))) {
- ret = -EFAULT;
- goto bail;
- }
- } else if (count == sizeof(odp)) {
- if (copy_from_user(&odp, data, sizeof(odp))) {
- ret = -EFAULT;
- goto bail;
- }
- dp.len = odp.len;
- dp.unit = odp.unit;
- dp.data = odp.data;
- dp.pbc_wd = 0;
- } else {
- ret = -EINVAL;
- goto bail;
- }
-
- /* send count must be an exact number of dwords */
- if (dp.len & 3) {
- ret = -EINVAL;
- goto bail;
- }
-
- plen = dp.len >> 2;
-
- dd = ipath_lookup(dp.unit);
- if (!dd || !(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase) {
- ipath_cdbg(VERBOSE, "illegal unit %u for diag data send\n",
- dp.unit);
- ret = -ENODEV;
- goto bail;
- }
-
- if (ipath_diag_inuse && !diag_set_link &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- diag_set_link = 1;
- ipath_cdbg(VERBOSE, "Trying to set to set link active for "
- "diag pkt\n");
- ipath_set_linkstate(dd, IPATH_IB_LINKARM);
- ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
- }
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ipath_cdbg(VERBOSE, "unit %u not usable\n", dd->ipath_unit);
- ret = -ENODEV;
- goto bail;
- }
- /*
- * Want to skip check for l_state if using custom PBC,
- * because we might be trying to force an SM packet out.
- * first-cut, skip _all_ state checking in that case.
- */
- val = ipath_ib_state(dd, dd->ipath_lastibcstat);
- lt_state = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
- l_state = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
- if (!dp.pbc_wd && (lt_state != INFINIPATH_IBCS_LT_STATE_LINKUP ||
- (val != dd->ib_init && val != dd->ib_arm &&
- val != dd->ib_active))) {
- ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n",
- dd->ipath_unit, (unsigned long long) val);
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * need total length before first word written, plus 2 Dwords. One Dword
- * is for padding so we get the full user data when not aligned on
- * a word boundary. The other Dword is to make sure we have room for the
- * ICRC which gets tacked on later.
- */
- maxlen_reserve = 2 * sizeof(u32);
- if (dp.len > dd->ipath_ibmaxlen - maxlen_reserve) {
- ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n",
- dp.len, dd->ipath_ibmaxlen);
- ret = -EINVAL;
- goto bail;
- }
-
- plen = sizeof(u32) + dp.len;
-
- tmpbuf = vmalloc(plen);
- if (!tmpbuf) {
- dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, "
- "failing\n");
- ret = -ENOMEM;
- goto bail;
- }
-
- if (copy_from_user(tmpbuf,
- (const void __user *) (unsigned long) dp.data,
- dp.len)) {
- ret = -EFAULT;
- goto bail;
- }
-
- plen >>= 2; /* in dwords */
-
- piobuf = ipath_getpiobuf(dd, plen, &pbufn);
- if (!piobuf) {
- ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n",
- dd->ipath_unit);
- ret = -EBUSY;
- goto bail;
- }
- /* disarm it just to be extra sure */
- ipath_disarm_piobufs(dd, pbufn, 1);
-
- if (ipath_debug & __IPATH_PKTDBG)
- ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n",
- dd->ipath_unit, plen - 1, pbufn);
-
- if (dp.pbc_wd == 0)
- dp.pbc_wd = plen;
- writeq(dp.pbc_wd, piobuf);
- /*
- * Copy all by the trigger word, then flush, so it's written
- * to chip before trigger word, then write trigger word, then
- * flush again, so packet is sent.
- */
- if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
- ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, tmpbuf, plen - 1);
- ipath_flush_wc();
- __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
- } else
- __iowrite32_copy(piobuf + 2, tmpbuf, plen);
-
- ipath_flush_wc();
-
- ret = sizeof(dp);
-
-bail:
- vfree(tmpbuf);
- return ret;
-}
-
-static int ipath_diag_release(struct inode *in, struct file *fp)
-{
- mutex_lock(&ipath_mutex);
- ipath_diag_inuse = 0;
- fp->private_data = NULL;
- mutex_unlock(&ipath_mutex);
- return 0;
-}
-
-static ssize_t ipath_diag_read(struct file *fp, char __user *data,
- size_t count, loff_t *off)
-{
- struct ipath_devdata *dd = fp->private_data;
- void __iomem *kreg_base;
- ssize_t ret;
-
- kreg_base = dd->ipath_kregbase;
-
- if (count == 0)
- ret = 0;
- else if ((count % 4) || (*off % 4))
- /* address or length is not 32-bit aligned, hence invalid */
- ret = -EINVAL;
- else if (ipath_diag_inuse < 1 && (*off || count != 8))
- ret = -EINVAL; /* prevent cat /dev/ipath_diag* */
- else if ((count % 8) || (*off % 8))
- /* address or length not 64-bit aligned; do 32-bit reads */
- ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
- else
- ret = ipath_read_umem64(dd, data, kreg_base + *off, count);
-
- if (ret >= 0) {
- *off += count;
- ret = count;
- if (ipath_diag_inuse == -2)
- ipath_diag_inuse++;
- }
-
- return ret;
-}
-
-static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off)
-{
- struct ipath_devdata *dd = fp->private_data;
- void __iomem *kreg_base;
- ssize_t ret;
-
- kreg_base = dd->ipath_kregbase;
-
- if (count == 0)
- ret = 0;
- else if ((count % 4) || (*off % 4))
- /* address or length is not 32-bit aligned, hence invalid */
- ret = -EINVAL;
- else if ((ipath_diag_inuse == -1 && (*off || count != 8)) ||
- ipath_diag_inuse == -2) /* read qw off 0, write qw off 0 */
- ret = -EINVAL; /* before any other write allowed */
- else if ((count % 8) || (*off % 8))
- /* address or length not 64-bit aligned; do 32-bit writes */
- ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
- else
- ret = ipath_write_umem64(dd, kreg_base + *off, data, count);
-
- if (ret >= 0) {
- *off += count;
- ret = count;
- if (ipath_diag_inuse == -1)
- ipath_diag_inuse = 1; /* all read/write OK now */
- }
-
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_dma.c b/drivers/staging/rdma/ipath/ipath_dma.c
deleted file mode 100644
index 123a8c0..0000000
--- a/drivers/staging/rdma/ipath/ipath_dma.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (c) 2006 QLogic, Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/scatterlist.h>
-#include <linux/gfp.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_verbs.h"
-
-#define BAD_DMA_ADDRESS ((u64) 0)
-
-/*
- * The following functions implement driver specific replacements
- * for the ib_dma_*() functions.
- *
- * These functions return kernel virtual addresses instead of
- * device bus addresses since the driver uses the CPU to copy
- * data instead of using hardware DMA.
- */
-
-static int ipath_mapping_error(struct ib_device *dev, u64 dma_addr)
-{
- return dma_addr == BAD_DMA_ADDRESS;
-}
-
-static u64 ipath_dma_map_single(struct ib_device *dev,
- void *cpu_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
- return (u64) cpu_addr;
-}
-
-static void ipath_dma_unmap_single(struct ib_device *dev,
- u64 addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static u64 ipath_dma_map_page(struct ib_device *dev,
- struct page *page,
- unsigned long offset,
- size_t size,
- enum dma_data_direction direction)
-{
- u64 addr;
-
- BUG_ON(!valid_dma_direction(direction));
-
- if (offset + size > PAGE_SIZE) {
- addr = BAD_DMA_ADDRESS;
- goto done;
- }
-
- addr = (u64) page_address(page);
- if (addr)
- addr += offset;
- /* TODO: handle highmem pages */
-
-done:
- return addr;
-}
-
-static void ipath_dma_unmap_page(struct ib_device *dev,
- u64 addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static int ipath_map_sg(struct ib_device *dev, struct scatterlist *sgl,
- int nents, enum dma_data_direction direction)
-{
- struct scatterlist *sg;
- u64 addr;
- int i;
- int ret = nents;
-
- BUG_ON(!valid_dma_direction(direction));
-
- for_each_sg(sgl, sg, nents, i) {
- addr = (u64) page_address(sg_page(sg));
- /* TODO: handle highmem pages */
- if (!addr) {
- ret = 0;
- break;
- }
- sg->dma_address = addr + sg->offset;
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
- sg->dma_length = sg->length;
-#endif
- }
- return ret;
-}
-
-static void ipath_unmap_sg(struct ib_device *dev,
- struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static void ipath_sync_single_for_cpu(struct ib_device *dev,
- u64 addr,
- size_t size,
- enum dma_data_direction dir)
-{
-}
-
-static void ipath_sync_single_for_device(struct ib_device *dev,
- u64 addr,
- size_t size,
- enum dma_data_direction dir)
-{
-}
-
-static void *ipath_dma_alloc_coherent(struct ib_device *dev, size_t size,
- u64 *dma_handle, gfp_t flag)
-{
- struct page *p;
- void *addr = NULL;
-
- p = alloc_pages(flag, get_order(size));
- if (p)
- addr = page_address(p);
- if (dma_handle)
- *dma_handle = (u64) addr;
- return addr;
-}
-
-static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
- void *cpu_addr, u64 dma_handle)
-{
- free_pages((unsigned long) cpu_addr, get_order(size));
-}
-
-struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
- .mapping_error = ipath_mapping_error,
- .map_single = ipath_dma_map_single,
- .unmap_single = ipath_dma_unmap_single,
- .map_page = ipath_dma_map_page,
- .unmap_page = ipath_dma_unmap_page,
- .map_sg = ipath_map_sg,
- .unmap_sg = ipath_unmap_sg,
- .sync_single_for_cpu = ipath_sync_single_for_cpu,
- .sync_single_for_device = ipath_sync_single_for_device,
- .alloc_coherent = ipath_dma_alloc_coherent,
- .free_coherent = ipath_dma_free_coherent
-};
diff --git a/drivers/staging/rdma/ipath/ipath_driver.c b/drivers/staging/rdma/ipath/ipath_driver.c
deleted file mode 100644
index 2ab22f9..0000000
--- a/drivers/staging/rdma/ipath/ipath_driver.c
+++ /dev/null
@@ -1,2784 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/spinlock.h>
-#include <linux/idr.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#ifdef CONFIG_X86_64
-#include <asm/pat.h>
-#endif
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-
-static void ipath_update_pio_bufs(struct ipath_devdata *);
-
-const char *ipath_get_unit_name(int unit)
-{
- static char iname[16];
- snprintf(iname, sizeof iname, "infinipath%u", unit);
- return iname;
-}
-
-#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
-#define PFX IPATH_DRV_NAME ": "
-
-/*
- * The size has to be longer than this string, so we can append
- * board/chip information to it in the init code.
- */
-const char ib_ipath_version[] = IPATH_IDSTR "\n";
-
-static struct idr unit_table;
-DEFINE_SPINLOCK(ipath_devs_lock);
-LIST_HEAD(ipath_dev_list);
-
-wait_queue_head_t ipath_state_wait;
-
-unsigned ipath_debug = __IPATH_INFO;
-
-module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(debug, "mask for debug prints");
-EXPORT_SYMBOL_GPL(ipath_debug);
-
-unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
-module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
-MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
-
-static unsigned ipath_hol_timeout_ms = 13000;
-module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
-MODULE_PARM_DESC(hol_timeout_ms,
- "duration of user app suspension after link failure");
-
-unsigned ipath_linkrecovery = 1;
-module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue");
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("QLogic <support@qlogic.com>");
-MODULE_DESCRIPTION("QLogic InfiniPath driver");
-
-/*
- * Table to translate the LINKTRAININGSTATE portion of
- * IBCStatus to a human-readable form.
- */
-const char *ipath_ibcstatus_str[] = {
- "Disabled",
- "LinkUp",
- "PollActive",
- "PollQuiet",
- "SleepDelay",
- "SleepQuiet",
- "LState6", /* unused */
- "LState7", /* unused */
- "CfgDebounce",
- "CfgRcvfCfg",
- "CfgWaitRmt",
- "CfgIdle",
- "RecovRetrain",
- "CfgTxRevLane", /* unused before IBA7220 */
- "RecovWaitRmt",
- "RecovIdle",
- /* below were added for IBA7220 */
- "CfgEnhanced",
- "CfgTest",
- "CfgWaitRmtTest",
- "CfgWaitCfgEnhanced",
- "SendTS_T",
- "SendTstIdles",
- "RcvTS_T",
- "SendTst_TS1s",
- "LTState18", "LTState19", "LTState1A", "LTState1B",
- "LTState1C", "LTState1D", "LTState1E", "LTState1F"
-};
-
-static void ipath_remove_one(struct pci_dev *);
-static int ipath_init_one(struct pci_dev *, const struct pci_device_id *);
-
-/* Only needed for registration, nothing else needs this info */
-#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
-#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
-
-/* Number of seconds before our card status check... */
-#define STATUS_TIMEOUT 60
-
-static const struct pci_device_id ipath_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
-
-static struct pci_driver ipath_driver = {
- .name = IPATH_DRV_NAME,
- .probe = ipath_init_one,
- .remove = ipath_remove_one,
- .id_table = ipath_pci_tbl,
- .driver = {
- .groups = ipath_driver_attr_groups,
- },
-};
-
-static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
- u32 *bar0, u32 *bar1)
-{
- int ret;
-
- ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
- if (ret)
- ipath_dev_err(dd, "failed to read bar0 before enable: "
- "error %d\n", -ret);
-
- ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1);
- if (ret)
- ipath_dev_err(dd, "failed to read bar1 before enable: "
- "error %d\n", -ret);
-
- ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1);
-}
-
-static void ipath_free_devdata(struct pci_dev *pdev,
- struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- pci_set_drvdata(pdev, NULL);
-
- if (dd->ipath_unit != -1) {
- spin_lock_irqsave(&ipath_devs_lock, flags);
- idr_remove(&unit_table, dd->ipath_unit);
- list_del(&dd->ipath_list);
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- }
- vfree(dd);
-}
-
-static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
-{
- unsigned long flags;
- struct ipath_devdata *dd;
- int ret;
-
- dd = vzalloc(sizeof(*dd));
- if (!dd) {
- dd = ERR_PTR(-ENOMEM);
- goto bail;
- }
- dd->ipath_unit = -1;
-
- idr_preload(GFP_KERNEL);
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate unit ID: error %d\n", -ret);
- ipath_free_devdata(pdev, dd);
- dd = ERR_PTR(ret);
- goto bail_unlock;
- }
- dd->ipath_unit = ret;
-
- dd->pcidev = pdev;
- pci_set_drvdata(pdev, dd);
-
- list_add(&dd->ipath_list, &ipath_dev_list);
-
-bail_unlock:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- idr_preload_end();
-bail:
- return dd;
-}
-
-static inline struct ipath_devdata *__ipath_lookup(int unit)
-{
- return idr_find(&unit_table, unit);
-}
-
-struct ipath_devdata *ipath_lookup(int unit)
-{
- struct ipath_devdata *dd;
- unsigned long flags;
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
- dd = __ipath_lookup(unit);
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- return dd;
-}
-
-int ipath_count_units(int *npresentp, int *nupp, int *maxportsp)
-{
- int nunits, npresent, nup;
- struct ipath_devdata *dd;
- unsigned long flags;
- int maxports;
-
- nunits = npresent = nup = maxports = 0;
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- nunits++;
- if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase)
- npresent++;
- if (dd->ipath_lid &&
- !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN
- | IPATH_LINKUNK)))
- nup++;
- if (dd->ipath_cfgports > maxports)
- maxports = dd->ipath_cfgports;
- }
-
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- if (npresentp)
- *npresentp = npresent;
- if (nupp)
- *nupp = nup;
- if (maxportsp)
- *maxportsp = maxports;
-
- return nunits;
-}
-
-/*
- * These next two routines are placeholders in case we don't have per-arch
- * code for controlling write combining. If explicit control of write
- * combining is not available, performance will probably be awful.
- */
-
-int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd)
-{
- return -EOPNOTSUPP;
-}
-
-void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd)
-{
-}
-
-/*
- * Perform a PIO buffer bandwidth write test, to verify proper system
- * configuration. Even when all the setup calls work, occasionally
- * BIOS or other issues can prevent write combining from working, or
- * can cause other bandwidth problems to the chip.
- *
- * This test simply writes the same buffer over and over again, and
- * measures close to the peak bandwidth to the chip (not testing
- * data bandwidth to the wire). On chips that use an address-based
- * trigger to send packets to the wire, this is easy. On chips that
- * use a count to trigger, we want to make sure that the packet doesn't
- * go out on the wire, or trigger flow control checks.
- */
-static void ipath_verify_pioperf(struct ipath_devdata *dd)
-{
- u32 pbnum, cnt, lcnt;
- u32 __iomem *piobuf;
- u32 *addr;
- u64 msecs, emsecs;
-
- piobuf = ipath_getpiobuf(dd, 0, &pbnum);
- if (!piobuf) {
- dev_info(&dd->pcidev->dev,
- "No PIObufs for checking perf, skipping\n");
- return;
- }
-
- /*
- * Enough to give us a reasonable test, less than piobuf size, and
- * likely multiple of store buffer length.
- */
- cnt = 1024;
-
- addr = vmalloc(cnt);
- if (!addr) {
- dev_info(&dd->pcidev->dev,
- "Couldn't get memory for checking PIO perf,"
- " skipping\n");
- goto done;
- }
-
- preempt_disable(); /* we want reasonably accurate elapsed time */
- msecs = 1 + jiffies_to_msecs(jiffies);
- for (lcnt = 0; lcnt < 10000U; lcnt++) {
- /* wait until we cross msec boundary */
- if (jiffies_to_msecs(jiffies) >= msecs)
- break;
- udelay(1);
- }
-
- ipath_disable_armlaunch(dd);
-
- /*
- * length 0, no dwords actually sent, and mark as VL15
- * on chips where that may matter (due to IB flowcontrol)
- */
- if ((dd->ipath_flags & IPATH_HAS_PBC_CNT))
- writeq(1UL << 63, piobuf);
- else
- writeq(0, piobuf);
- ipath_flush_wc();
-
- /*
- * this is only roughly accurate, since even with preempt we
- * still take interrupts that could take a while. Running for
- * >= 5 msec seems to get us "close enough" to accurate values
- */
- msecs = jiffies_to_msecs(jiffies);
- for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
- __iowrite32_copy(piobuf + 64, addr, cnt >> 2);
- emsecs = jiffies_to_msecs(jiffies) - msecs;
- }
-
- /* 1 GiB/sec, slightly over IB SDR line rate */
- if (lcnt < (emsecs * 1024U))
- ipath_dev_err(dd,
- "Performance problem: bandwidth to PIO buffers is "
- "only %u MiB/sec\n",
- lcnt / (u32) emsecs);
- else
- ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n",
- lcnt / (u32) emsecs);
-
- preempt_enable();
-
- vfree(addr);
-
-done:
- /* disarm piobuf, so it's available again */
- ipath_disarm_piobufs(dd, pbnum, 1);
- ipath_enable_armlaunch(dd);
-}
-
-static void cleanup_device(struct ipath_devdata *dd);
-
-static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int ret, len, j;
- struct ipath_devdata *dd;
- unsigned long long addr;
- u32 bar0 = 0, bar1 = 0;
-
-#ifdef CONFIG_X86_64
- if (pat_enabled()) {
- pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n");
- ret = -ENODEV;
- goto bail;
- }
-#endif
-
- dd = ipath_alloc_devdata(pdev);
- if (IS_ERR(dd)) {
- ret = PTR_ERR(dd);
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate devdata: error %d\n", -ret);
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);
-
- ret = pci_enable_device(pdev);
- if (ret) {
- /* This can happen iff:
- *
- * We did a chip reset, and then failed to reprogram the
- * BAR, or the chip reset due to an internal error. We then
- * unloaded the driver and reloaded it.
- *
- * Both reset cases set the BAR back to initial state. For
- * the latter case, the AER sticky error bit at offset 0x718
- * should be set, but the Linux kernel doesn't yet know
- * about that, it appears. If the original BAR was retained
- * in the kernel data structures, this may be OK.
- */
- ipath_dev_err(dd, "enable unit %d failed: error %d\n",
- dd->ipath_unit, -ret);
- goto bail_devdata;
- }
- addr = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x "
- "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
- ent->device, ent->driver_data);
-
- read_bars(dd, pdev, &bar0, &bar1);
-
- if (!bar1 && !(bar0 & ~0xf)) {
- if (addr) {
- dev_info(&pdev->dev, "BAR is 0 (probable RESET), "
- "rewriting as %llx\n", addr);
- ret = pci_write_config_dword(
- pdev, PCI_BASE_ADDRESS_0, addr);
- if (ret) {
- ipath_dev_err(dd, "rewrite of BAR0 "
- "failed: err %d\n", -ret);
- goto bail_disable;
- }
- ret = pci_write_config_dword(
- pdev, PCI_BASE_ADDRESS_1, addr >> 32);
- if (ret) {
- ipath_dev_err(dd, "rewrite of BAR1 "
- "failed: err %d\n", -ret);
- goto bail_disable;
- }
- } else {
- ipath_dev_err(dd, "BAR is 0 (probable RESET), "
- "not usable until reboot\n");
- ret = -ENODEV;
- goto bail_disable;
- }
- }
-
- ret = pci_request_regions(pdev, IPATH_DRV_NAME);
- if (ret) {
- dev_info(&pdev->dev, "pci_request_regions unit %u fails: "
- "err %d\n", dd->ipath_unit, -ret);
- goto bail_disable;
- }
-
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (ret) {
- /*
- * if the 64 bit setup fails, try 32 bit. Some systems
- * do not setup 64 bit maps on systems with 2GB or less
- * memory installed.
- */
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret) {
- dev_info(&pdev->dev,
- "Unable to set DMA mask for unit %u: %d\n",
- dd->ipath_unit, ret);
- goto bail_regions;
- } else {
- ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
- ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret)
- dev_info(&pdev->dev,
- "Unable to set DMA consistent mask "
- "for unit %u: %d\n",
- dd->ipath_unit, ret);
-
- }
- } else {
- ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (ret)
- dev_info(&pdev->dev,
- "Unable to set DMA consistent mask "
- "for unit %u: %d\n",
- dd->ipath_unit, ret);
- }
-
- pci_set_master(pdev);
-
- /*
- * Save BARs to rewrite after device reset. Save all 64 bits of
- * BAR, just in case.
- */
- dd->ipath_pcibar0 = addr;
- dd->ipath_pcibar1 = addr >> 32;
- dd->ipath_deviceid = ent->device; /* save for later use */
- dd->ipath_vendorid = ent->vendor;
-
- /* setup the chip-specific functions, as early as possible. */
- switch (ent->device) {
- case PCI_DEVICE_ID_INFINIPATH_HT:
- ipath_init_iba6110_funcs(dd);
- break;
-
- default:
- ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
- "failing\n", ent->device);
- return -ENODEV;
- }
-
- for (j = 0; j < 6; j++) {
- if (!pdev->resource[j].start)
- continue;
- ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n",
- j, &pdev->resource[j],
- (unsigned long long)pci_resource_len(pdev, j));
- }
-
- if (!addr) {
- ipath_dev_err(dd, "No valid address in BAR 0!\n");
- ret = -ENODEV;
- goto bail_regions;
- }
-
- dd->ipath_pcirev = pdev->revision;
-
-#if defined(__powerpc__)
- /* There isn't a generic way to specify writethrough mappings */
- dd->ipath_kregbase = __ioremap(addr, len,
- (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
-#else
- /* XXX: split this properly to enable on PAT */
- dd->ipath_kregbase = ioremap_nocache(addr, len);
-#endif
-
- if (!dd->ipath_kregbase) {
- ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
- addr);
- ret = -ENOMEM;
- goto bail_iounmap;
- }
- dd->ipath_kregend = (u64 __iomem *)
- ((void __iomem *)dd->ipath_kregbase + len);
- dd->ipath_physaddr = addr; /* used for io_remap, etc. */
- /* for user mmap */
- ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
- addr, dd->ipath_kregbase);
-
- if (dd->ipath_f_bus(dd, pdev))
- ipath_dev_err(dd, "Failed to setup config space; "
- "continuing anyway\n");
-
- /*
- * set up our interrupt handler; IRQF_SHARED probably not needed,
- * since MSI interrupts shouldn't be shared but won't hurt for now.
- * check 0 irq after we return from chip-specific bus setup, since
- * that can affect this due to setup
- */
- if (!dd->ipath_irq)
- ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
- "work\n");
- else {
- ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
- IPATH_DRV_NAME, dd);
- if (ret) {
- ipath_dev_err(dd, "Couldn't setup irq handler, "
- "irq=%d: %d\n", dd->ipath_irq, ret);
- goto bail_iounmap;
- }
- }
-
- ret = ipath_init_chip(dd, 0); /* do the chip-specific init */
- if (ret)
- goto bail_irqsetup;
-
- ret = ipath_enable_wc(dd);
-
- if (ret)
- ret = 0;
-
- ipath_verify_pioperf(dd);
-
- ipath_device_create_group(&pdev->dev, dd);
- ipathfs_add_device(dd);
- ipath_user_add(dd);
- ipath_diag_add(dd);
- ipath_register_ib_device(dd);
-
- goto bail;
-
-bail_irqsetup:
- cleanup_device(dd);
-
- if (dd->ipath_irq)
- dd->ipath_f_free_irq(dd);
-
- if (dd->ipath_f_cleanup)
- dd->ipath_f_cleanup(dd);
-
-bail_iounmap:
- iounmap((volatile void __iomem *) dd->ipath_kregbase);
-
-bail_regions:
- pci_release_regions(pdev);
-
-bail_disable:
- pci_disable_device(pdev);
-
-bail_devdata:
- ipath_free_devdata(pdev, dd);
-
-bail:
- return ret;
-}
-
-static void cleanup_device(struct ipath_devdata *dd)
-{
- int port;
- struct ipath_portdata **tmp;
- unsigned long flags;
-
- if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
- /* can't do anything more with chip; needs re-init */
- *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
- if (dd->ipath_kregbase) {
- /*
- * if we haven't already cleaned up before these are
- * to ensure any register reads/writes "fail" until
- * re-init
- */
- dd->ipath_kregbase = NULL;
- dd->ipath_uregbase = 0;
- dd->ipath_sregbase = 0;
- dd->ipath_cregbase = 0;
- dd->ipath_kregsize = 0;
- }
- ipath_disable_wc(dd);
- }
-
- if (dd->ipath_spectriggerhit)
- dev_info(&dd->pcidev->dev, "%lu special trigger hits\n",
- dd->ipath_spectriggerhit);
-
- if (dd->ipath_pioavailregs_dma) {
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- (void *) dd->ipath_pioavailregs_dma,
- dd->ipath_pioavailregs_phys);
- dd->ipath_pioavailregs_dma = NULL;
- }
- if (dd->ipath_dummy_hdrq) {
- dma_free_coherent(&dd->pcidev->dev,
- dd->ipath_pd[0]->port_rcvhdrq_size,
- dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
- dd->ipath_dummy_hdrq = NULL;
- }
-
- if (dd->ipath_pageshadow) {
- struct page **tmpp = dd->ipath_pageshadow;
- dma_addr_t *tmpd = dd->ipath_physshadow;
- int i, cnt = 0;
-
- ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
- "locked\n");
- for (port = 0; port < dd->ipath_cfgports; port++) {
- int port_tidbase = port * dd->ipath_rcvtidcnt;
- int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
- for (i = port_tidbase; i < maxtid; i++) {
- if (!tmpp[i])
- continue;
- pci_unmap_page(dd->pcidev, tmpd[i],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages(&tmpp[i], 1);
- tmpp[i] = NULL;
- cnt++;
- }
- }
- if (cnt) {
- ipath_stats.sps_pageunlocks += cnt;
- ipath_cdbg(VERBOSE, "There were still %u expTID "
- "entries locked\n", cnt);
- }
- if (ipath_stats.sps_pagelocks ||
- ipath_stats.sps_pageunlocks)
- ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
- "unlocked via ipath_m{un}lock\n",
- (unsigned long long)
- ipath_stats.sps_pagelocks,
- (unsigned long long)
- ipath_stats.sps_pageunlocks);
-
- ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
- dd->ipath_pageshadow);
- tmpp = dd->ipath_pageshadow;
- dd->ipath_pageshadow = NULL;
- vfree(tmpp);
-
- dd->ipath_egrtidbase = NULL;
- }
-
- /*
- * free any resources still in use (usually just kernel ports)
- * at unload; we do for portcnt, because that's what we allocate.
- * We acquire lock to be really paranoid that ipath_pd isn't being
- * accessed from some interrupt-related code (that should not happen,
- * but best to be sure).
- */
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- tmp = dd->ipath_pd;
- dd->ipath_pd = NULL;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- for (port = 0; port < dd->ipath_portcnt; port++) {
- struct ipath_portdata *pd = tmp[port];
- tmp[port] = NULL; /* debugging paranoia */
- ipath_free_pddata(dd, pd);
- }
- kfree(tmp);
-}
-
-static void ipath_remove_one(struct pci_dev *pdev)
-{
- struct ipath_devdata *dd = pci_get_drvdata(pdev);
-
- ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);
-
- /*
- * disable the IB link early, to be sure no new packets arrive, which
- * complicates the shutdown process
- */
- ipath_shutdown_device(dd);
-
- flush_workqueue(ib_wq);
-
- if (dd->verbs_dev)
- ipath_unregister_ib_device(dd->verbs_dev);
-
- ipath_diag_remove(dd);
- ipath_user_remove(dd);
- ipathfs_remove_device(dd);
- ipath_device_remove_group(&pdev->dev, dd);
-
- ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
- "unit %u\n", dd, (u32) dd->ipath_unit);
-
- cleanup_device(dd);
-
- /*
- * turn off rcv, send, and interrupts for all ports, all drivers
- * should also hard reset the chip here?
- * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
- * for all versions of the driver, if they were allocated
- */
- if (dd->ipath_irq) {
- ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
- dd->ipath_unit, dd->ipath_irq);
- dd->ipath_f_free_irq(dd);
- } else
- ipath_dbg("irq is 0, not doing free_irq "
- "for unit %u\n", dd->ipath_unit);
- /*
- * we check for NULL here, because it's outside
- * the kregbase check, and we need to call it
- * after the free_irq. Thus it's possible that
- * the function pointers were never initialized.
- */
- if (dd->ipath_f_cleanup)
- /* clean up chip-specific stuff */
- dd->ipath_f_cleanup(dd);
-
- ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
- iounmap((volatile void __iomem *) dd->ipath_kregbase);
- pci_release_regions(pdev);
- ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
- pci_disable_device(pdev);
-
- ipath_free_devdata(pdev, dd);
-}
-
-/* general driver use */
-DEFINE_MUTEX(ipath_mutex);
-
-static DEFINE_SPINLOCK(ipath_pioavail_lock);
-
-/**
- * ipath_disarm_piobufs - cancel a range of PIO buffers
- * @dd: the infinipath device
- * @first: the first PIO buffer to cancel
- * @cnt: the number of PIO buffers to cancel
- *
- * cancel a range of PIO buffers, used when they might be armed, but
- * not triggered. Used at init to ensure buffer state, and also user
- * process close, in case it died while writing to a PIO buffer
- * Also after errors.
- */
-void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first,
- unsigned cnt)
-{
- unsigned i, last = first + cnt;
- unsigned long flags;
-
- ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first);
- for (i = first; i < last; i++) {
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /*
- * The disarm-related bits are write-only, so it
- * is ok to OR them in with our copy of sendctrl
- * while we hold the lock.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl | INFINIPATH_S_DISARM |
- (i << INFINIPATH_S_DISARMPIOBUF_SHIFT));
- /* can't disarm bufs back-to-back per iba7220 spec */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
- /* on some older chips, update may not happen after cancel */
- ipath_force_pio_avail_update(dd);
-}
-
-/**
- * ipath_wait_linkstate - wait for an IB link state change to occur
- * @dd: the infinipath device
- * @state: the state to wait for
- * @msecs: the number of milliseconds to wait
- *
- * wait up to msecs milliseconds for IB link state change to occur for
- * now, take the easy polling route. Currently used only by
- * ipath_set_linkstate. Returns 0 if state reached, otherwise
- * -ETIMEDOUT state can have multiple states set, for any of several
- * transitions.
- */
-int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
-{
- dd->ipath_state_wanted = state;
- wait_event_interruptible_timeout(ipath_state_wait,
- (dd->ipath_flags & state),
- msecs_to_jiffies(msecs));
- dd->ipath_state_wanted = 0;
-
- if (!(dd->ipath_flags & state)) {
- u64 val;
- ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
- " ms\n",
- /* test INIT ahead of DOWN, both can be set */
- (state & IPATH_LINKINIT) ? "INIT" :
- ((state & IPATH_LINKDOWN) ? "DOWN" :
- ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
- msecs);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n",
- (unsigned long long) ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_ibcctrl),
- (unsigned long long) val,
- ipath_ibcstatus_str[val & dd->ibcs_lts_mask]);
- }
- return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
-}
-
-static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
- char *buf, size_t blen)
-{
- static const struct {
- ipath_err_t err;
- const char *msg;
- } errs[] = {
- { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
- { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
- { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
- { INFINIPATH_E_SDMABASE, "SDmaBase" },
- { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
- { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
- { INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
- { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
- { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
- { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
- { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
- { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
- };
- int i;
- int expected;
- size_t bidx = 0;
-
- for (i = 0; i < ARRAY_SIZE(errs); i++) {
- expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
- test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- if ((err & errs[i].err) && !expected)
- bidx += snprintf(buf + bidx, blen - bidx,
- "%s ", errs[i].msg);
- }
-}
-
-/*
- * Decode the error status into strings, deciding whether to always
- * print * it or not depending on "normal packet errors" vs everything
- * else. Return 1 if "real" errors, otherwise 0 if only packet
- * errors, so caller can decide what to print with the string.
- */
-int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
- ipath_err_t err)
-{
- int iserr = 1;
- *buf = '\0';
- if (err & INFINIPATH_E_PKTERRS) {
- if (!(err & ~INFINIPATH_E_PKTERRS))
- iserr = 0; // if only packet errors.
- if (ipath_debug & __IPATH_ERRPKTDBG) {
- if (err & INFINIPATH_E_REBP)
- strlcat(buf, "EBP ", blen);
- if (err & INFINIPATH_E_RVCRC)
- strlcat(buf, "VCRC ", blen);
- if (err & INFINIPATH_E_RICRC) {
- strlcat(buf, "CRC ", blen);
- // clear for check below, so only once
- err &= INFINIPATH_E_RICRC;
- }
- if (err & INFINIPATH_E_RSHORTPKTLEN)
- strlcat(buf, "rshortpktlen ", blen);
- if (err & INFINIPATH_E_SDROPPEDDATAPKT)
- strlcat(buf, "sdroppeddatapkt ", blen);
- if (err & INFINIPATH_E_SPKTLEN)
- strlcat(buf, "spktlen ", blen);
- }
- if ((err & INFINIPATH_E_RICRC) &&
- !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP)))
- strlcat(buf, "CRC ", blen);
- if (!iserr)
- goto done;
- }
- if (err & INFINIPATH_E_RHDRLEN)
- strlcat(buf, "rhdrlen ", blen);
- if (err & INFINIPATH_E_RBADTID)
- strlcat(buf, "rbadtid ", blen);
- if (err & INFINIPATH_E_RBADVERSION)
- strlcat(buf, "rbadversion ", blen);
- if (err & INFINIPATH_E_RHDR)
- strlcat(buf, "rhdr ", blen);
- if (err & INFINIPATH_E_SENDSPECIALTRIGGER)
- strlcat(buf, "sendspecialtrigger ", blen);
- if (err & INFINIPATH_E_RLONGPKTLEN)
- strlcat(buf, "rlongpktlen ", blen);
- if (err & INFINIPATH_E_RMAXPKTLEN)
- strlcat(buf, "rmaxpktlen ", blen);
- if (err & INFINIPATH_E_RMINPKTLEN)
- strlcat(buf, "rminpktlen ", blen);
- if (err & INFINIPATH_E_SMINPKTLEN)
- strlcat(buf, "sminpktlen ", blen);
- if (err & INFINIPATH_E_RFORMATERR)
- strlcat(buf, "rformaterr ", blen);
- if (err & INFINIPATH_E_RUNSUPVL)
- strlcat(buf, "runsupvl ", blen);
- if (err & INFINIPATH_E_RUNEXPCHAR)
- strlcat(buf, "runexpchar ", blen);
- if (err & INFINIPATH_E_RIBFLOW)
- strlcat(buf, "ribflow ", blen);
- if (err & INFINIPATH_E_SUNDERRUN)
- strlcat(buf, "sunderrun ", blen);
- if (err & INFINIPATH_E_SPIOARMLAUNCH)
- strlcat(buf, "spioarmlaunch ", blen);
- if (err & INFINIPATH_E_SUNEXPERRPKTNUM)
- strlcat(buf, "sunexperrpktnum ", blen);
- if (err & INFINIPATH_E_SDROPPEDSMPPKT)
- strlcat(buf, "sdroppedsmppkt ", blen);
- if (err & INFINIPATH_E_SMAXPKTLEN)
- strlcat(buf, "smaxpktlen ", blen);
- if (err & INFINIPATH_E_SUNSUPVL)
- strlcat(buf, "sunsupVL ", blen);
- if (err & INFINIPATH_E_INVALIDADDR)
- strlcat(buf, "invalidaddr ", blen);
- if (err & INFINIPATH_E_RRCVEGRFULL)
- strlcat(buf, "rcvegrfull ", blen);
- if (err & INFINIPATH_E_RRCVHDRFULL)
- strlcat(buf, "rcvhdrfull ", blen);
- if (err & INFINIPATH_E_IBSTATUSCHANGED)
- strlcat(buf, "ibcstatuschg ", blen);
- if (err & INFINIPATH_E_RIBLOSTLINK)
- strlcat(buf, "riblostlink ", blen);
- if (err & INFINIPATH_E_HARDWARE)
- strlcat(buf, "hardware ", blen);
- if (err & INFINIPATH_E_RESET)
- strlcat(buf, "reset ", blen);
- if (err & INFINIPATH_E_SDMAERRS)
- decode_sdma_errs(dd, err, buf, blen);
- if (err & INFINIPATH_E_INVALIDEEPCMD)
- strlcat(buf, "invalideepromcmd ", blen);
-done:
- return iserr;
-}
-
-/**
- * get_rhf_errstring - decode RHF errors
- * @err: the err number
- * @msg: the output buffer
- * @len: the length of the output buffer
- *
- * only used one place now, may want more later
- */
-static void get_rhf_errstring(u32 err, char *msg, size_t len)
-{
- /* if no errors, and so don't need to check what's first */
- *msg = '\0';
-
- if (err & INFINIPATH_RHF_H_ICRCERR)
- strlcat(msg, "icrcerr ", len);
- if (err & INFINIPATH_RHF_H_VCRCERR)
- strlcat(msg, "vcrcerr ", len);
- if (err & INFINIPATH_RHF_H_PARITYERR)
- strlcat(msg, "parityerr ", len);
- if (err & INFINIPATH_RHF_H_LENERR)
- strlcat(msg, "lenerr ", len);
- if (err & INFINIPATH_RHF_H_MTUERR)
- strlcat(msg, "mtuerr ", len);
- if (err & INFINIPATH_RHF_H_IHDRERR)
- /* infinipath hdr checksum error */
- strlcat(msg, "ipathhdrerr ", len);
- if (err & INFINIPATH_RHF_H_TIDERR)
- strlcat(msg, "tiderr ", len);
- if (err & INFINIPATH_RHF_H_MKERR)
- /* bad port, offset, etc. */
- strlcat(msg, "invalid ipathhdr ", len);
- if (err & INFINIPATH_RHF_H_IBERR)
- strlcat(msg, "iberr ", len);
- if (err & INFINIPATH_RHF_L_SWA)
- strlcat(msg, "swA ", len);
- if (err & INFINIPATH_RHF_L_SWB)
- strlcat(msg, "swB ", len);
-}
-
-/**
- * ipath_get_egrbuf - get an eager buffer
- * @dd: the infinipath device
- * @bufnum: the eager buffer to get
- *
- * must only be called if ipath_pd[port] is known to be allocated
- */
-static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum)
-{
- return dd->ipath_port0_skbinfo ?
- (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
-}
-
-/**
- * ipath_alloc_skb - allocate an skb and buffer with possible constraints
- * @dd: the infinipath device
- * @gfp_mask: the sk_buff SFP mask
- */
-struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd,
- gfp_t gfp_mask)
-{
- struct sk_buff *skb;
- u32 len;
-
- /*
- * Only fully supported way to handle this is to allocate lots
- * extra, align as needed, and then do skb_reserve(). That wastes
- * a lot of memory... I'll have to hack this into infinipath_copy
- * also.
- */
-
- /*
- * We need 2 extra bytes for ipath_ether data sent in the
- * key header. In order to keep everything dword aligned,
- * we'll reserve 4 bytes.
- */
- len = dd->ipath_ibmaxlen + 4;
-
- if (dd->ipath_flags & IPATH_4BYTE_TID) {
- /* We need a 2KB multiple alignment, and there is no way
- * to do it except to allocate extra and then skb_reserve
- * enough to bring it up to the right alignment.
- */
- len += 2047;
- }
-
- skb = __dev_alloc_skb(len, gfp_mask);
- if (!skb) {
- ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
- len);
- goto bail;
- }
-
- skb_reserve(skb, 4);
-
- if (dd->ipath_flags & IPATH_4BYTE_TID) {
- u32 una = (unsigned long)skb->data & 2047;
- if (una)
- skb_reserve(skb, 2048 - una);
- }
-
-bail:
- return skb;
-}
-
-static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
- u32 eflags,
- u32 l,
- u32 etail,
- __le32 *rhf_addr,
- struct ipath_message_header *hdr)
-{
- char emsg[128];
-
- get_rhf_errstring(eflags, emsg, sizeof emsg);
- ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
- "tlen=%x opcode=%x egridx=%x: %s\n",
- eflags, l,
- ipath_hdrget_rcv_type(rhf_addr),
- ipath_hdrget_length_in_bytes(rhf_addr),
- be32_to_cpu(hdr->bth[0]) >> 24,
- etail, emsg);
-
- /* Count local link integrity errors. */
- if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) {
- u8 n = (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
-
- if (++dd->ipath_lli_counter > n) {
- dd->ipath_lli_counter = 0;
- dd->ipath_lli_errors++;
- }
- }
-}
-
-/*
- * ipath_kreceive - receive a packet
- * @pd: the infinipath port
- *
- * called from interrupt handler for errors or receive interrupt
- */
-void ipath_kreceive(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- __le32 *rhf_addr;
- void *ebuf;
- const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
- const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
- u32 etail = -1, l, hdrqtail;
- struct ipath_message_header *hdr;
- u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0;
- static u64 totcalls; /* stats, may eventually remove */
- int last;
-
- l = pd->port_head;
- rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset;
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- u32 seq = ipath_hdrget_seq(rhf_addr);
-
- if (seq != pd->port_seq_cnt)
- goto bail;
- hdrqtail = 0;
- } else {
- hdrqtail = ipath_get_rcvhdrtail(pd);
- if (l == hdrqtail)
- goto bail;
- smp_rmb();
- }
-
-reloop:
- for (last = 0, i = 1; !last; i += !last) {
- hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
- eflags = ipath_hdrget_err_flags(rhf_addr);
- etype = ipath_hdrget_rcv_type(rhf_addr);
- /* total length */
- tlen = ipath_hdrget_length_in_bytes(rhf_addr);
- ebuf = NULL;
- if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ?
- ipath_hdrget_use_egr_buf(rhf_addr) :
- (etype != RCVHQ_RCV_TYPE_EXPECTED)) {
- /*
- * It turns out that the chip uses an eager buffer
- * for all non-expected packets, whether it "needs"
- * one or not. So always get the index, but don't
- * set ebuf (so we try to copy data) unless the
- * length requires it.
- */
- etail = ipath_hdrget_index(rhf_addr);
- updegr = 1;
- if (tlen > sizeof(*hdr) ||
- etype == RCVHQ_RCV_TYPE_NON_KD)
- ebuf = ipath_get_egrbuf(dd, etail);
- }
-
- /*
- * both tiderr and ipathhdrerr are set for all plain IB
- * packets; only ipathhdrerr should be set.
- */
-
- if (etype != RCVHQ_RCV_TYPE_NON_KD &&
- etype != RCVHQ_RCV_TYPE_ERROR &&
- ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) !=
- IPS_PROTO_VERSION)
- ipath_cdbg(PKT, "Bad InfiniPath protocol version "
- "%x\n", etype);
-
- if (unlikely(eflags))
- ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr);
- else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
- ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen);
- if (dd->ipath_lli_counter)
- dd->ipath_lli_counter--;
- } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
- u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24;
- u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff;
- ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
- "qp=%x), len %x; ignored\n",
- etype, opcode, qp, tlen);
- } else if (etype == RCVHQ_RCV_TYPE_EXPECTED) {
- ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
- be32_to_cpu(hdr->bth[0]) >> 24);
- } else {
- /*
- * error packet, type of error unknown.
- * Probably type 3, but we don't know, so don't
- * even try to print the opcode, etc.
- * Usually caused by a "bad packet", that has no
- * BTH, when the LRH says it should.
- */
- ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
- " %x, len %x hdrq+%x rhf: %Lx\n",
- etail, tlen, l, (unsigned long long)
- le64_to_cpu(*(__le64 *) rhf_addr));
- if (ipath_debug & __IPATH_ERRPKTDBG) {
- u32 j, *d, dw = rsize-2;
- if (rsize > (tlen>>2))
- dw = tlen>>2;
- d = (u32 *)hdr;
- printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n",
- dw);
- for (j = 0; j < dw; j++)
- printk(KERN_DEBUG "%8x%s", d[j],
- (j%8) == 7 ? "\n" : " ");
- printk(KERN_DEBUG ".\n");
- }
- }
- l += rsize;
- if (l >= maxcnt)
- l = 0;
- rhf_addr = (__le32 *) pd->port_rcvhdrq +
- l + dd->ipath_rhf_offset;
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- u32 seq = ipath_hdrget_seq(rhf_addr);
-
- if (++pd->port_seq_cnt > 13)
- pd->port_seq_cnt = 1;
- if (seq != pd->port_seq_cnt)
- last = 1;
- } else if (l == hdrqtail) {
- last = 1;
- }
- /*
- * update head regs on last packet, and every 16 packets.
- * Reduce bus traffic, while still trying to prevent
- * rcvhdrq overflows, for when the queue is nearly full
- */
- if (last || !(i & 0xf)) {
- u64 lval = l;
-
- /* request IBA6120 and 7220 interrupt only on last */
- if (last)
- lval |= dd->ipath_rhdrhead_intr_off;
- ipath_write_ureg(dd, ur_rcvhdrhead, lval,
- pd->port_port);
- if (updegr) {
- ipath_write_ureg(dd, ur_rcvegrindexhead,
- etail, pd->port_port);
- updegr = 0;
- }
- }
- }
-
- if (!dd->ipath_rhdrhead_intr_off && !reloop &&
- !(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- /* IBA6110 workaround; we can have a race clearing chip
- * interrupt with another interrupt about to be delivered,
- * and can clear it before it is delivered on the GPIO
- * workaround. By doing the extra check here for the
- * in-memory tail register updating while we were doing
- * earlier packets, we "almost" guarantee we have covered
- * that case.
- */
- u32 hqtail = ipath_get_rcvhdrtail(pd);
- if (hqtail != hdrqtail) {
- hdrqtail = hqtail;
- reloop = 1; /* loop 1 extra time at most */
- goto reloop;
- }
- }
-
- pkttot += i;
-
- pd->port_head = l;
-
- if (pkttot > ipath_stats.sps_maxpkts_call)
- ipath_stats.sps_maxpkts_call = pkttot;
- ipath_stats.sps_port0pkts += pkttot;
- ipath_stats.sps_avgpkts_call =
- ipath_stats.sps_port0pkts / ++totcalls;
-
-bail:;
-}
-
-/**
- * ipath_update_pio_bufs - update shadow copy of the PIO availability map
- * @dd: the infinipath device
- *
- * called whenever our local copy indicates we have run out of send buffers
- * NOTE: This can be called from interrupt context by some code
- * and from non-interrupt context by ipath_getpiobuf().
- */
-
-static void ipath_update_pio_bufs(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int i;
- const unsigned piobregs = (unsigned)dd->ipath_pioavregs;
-
- /* If the generation (check) bits have changed, then we update the
- * busy bit for the corresponding PIO buffer. This algorithm will
- * modify positions to the value they already have in some cases
- * (i.e., no change), but it's faster than changing only the bits
- * that have changed.
- *
- * We would like to do this atomicly, to avoid spinlocks in the
- * critical send path, but that's not really possible, given the
- * type of changes, and that this routine could be called on
- * multiple cpu's simultaneously, so we lock in this routine only,
- * to avoid conflicting updates; all we change is the shadow, and
- * it's a single 64 bit memory location, so by definition the update
- * is atomic in terms of what other cpu's can see in testing the
- * bits. The spin_lock overhead isn't too bad, since it only
- * happens when all buffers are in use, so only cpu overhead, not
- * latency or bandwidth is affected.
- */
- if (!dd->ipath_pioavailregs_dma) {
- ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
- return;
- }
- if (ipath_debug & __IPATH_VERBDBG) {
- /* only if packet debug and verbose */
- volatile __le64 *dma = dd->ipath_pioavailregs_dma;
- unsigned long *shadow = dd->ipath_pioavailshadow;
-
- ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, "
- "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx "
- "s3=%lx\n",
- (unsigned long long) le64_to_cpu(dma[0]),
- shadow[0],
- (unsigned long long) le64_to_cpu(dma[1]),
- shadow[1],
- (unsigned long long) le64_to_cpu(dma[2]),
- shadow[2],
- (unsigned long long) le64_to_cpu(dma[3]),
- shadow[3]);
- if (piobregs > 4)
- ipath_cdbg(
- PKT, "2nd group, dma4=%llx shad4=%lx, "
- "d5=%llx s5=%lx, d6=%llx s6=%lx, "
- "d7=%llx s7=%lx\n",
- (unsigned long long) le64_to_cpu(dma[4]),
- shadow[4],
- (unsigned long long) le64_to_cpu(dma[5]),
- shadow[5],
- (unsigned long long) le64_to_cpu(dma[6]),
- shadow[6],
- (unsigned long long) le64_to_cpu(dma[7]),
- shadow[7]);
- }
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (i = 0; i < piobregs; i++) {
- u64 pchbusy, pchg, piov, pnew;
- /*
- * Chip Errata: bug 6641; even and odd qwords>3 are swapped
- */
- if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]);
- else
- piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
- pchg = dd->ipath_pioavailkernel[i] &
- ~(dd->ipath_pioavailshadow[i] ^ piov);
- pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
- if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
- pnew = dd->ipath_pioavailshadow[i] & ~pchbusy;
- pnew |= piov & pchbusy;
- dd->ipath_pioavailshadow[i] = pnew;
- }
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-}
-
-/*
- * used to force update of pioavailshadow if we can't get a pio buffer.
- * Needed primarily due to exitting freeze mode after recovering
- * from errors. Done lazily, because it's safer (known to not
- * be writing pio buffers).
- */
-static void ipath_reset_availshadow(struct ipath_devdata *dd)
-{
- int i, im;
- unsigned long flags;
-
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- u64 val, oldval;
- /* deal with 6110 chip bug on high register #s */
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
- /*
- * busy out the buffers not in the kernel avail list,
- * without changing the generation bits.
- */
- oldval = dd->ipath_pioavailshadow[i];
- dd->ipath_pioavailshadow[i] = val |
- ((~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
- 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
- if (oldval != dd->ipath_pioavailshadow[i])
- ipath_dbg("shadow[%d] was %Lx, now %lx\n",
- i, (unsigned long long) oldval,
- dd->ipath_pioavailshadow[i]);
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-}
-
-/**
- * ipath_setrcvhdrsize - set the receive header size
- * @dd: the infinipath device
- * @rhdrsize: the receive header size
- *
- * called from user init code, and also layered driver init
- */
-int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize)
-{
- int ret = 0;
-
- if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) {
- if (dd->ipath_rcvhdrsize != rhdrsize) {
- dev_info(&dd->pcidev->dev,
- "Error: can't set protocol header "
- "size %u, already %u\n",
- rhdrsize, dd->ipath_rcvhdrsize);
- ret = -EAGAIN;
- } else
- ipath_cdbg(VERBOSE, "Reuse same protocol header "
- "size %u\n", dd->ipath_rcvhdrsize);
- } else if (rhdrsize > (dd->ipath_rcvhdrentsize -
- (sizeof(u64) / sizeof(u32)))) {
- ipath_dbg("Error: can't set protocol header size %u "
- "(> max %u)\n", rhdrsize,
- dd->ipath_rcvhdrentsize -
- (u32) (sizeof(u64) / sizeof(u32)));
- ret = -EOVERFLOW;
- } else {
- dd->ipath_flags |= IPATH_RCVHDRSZ_SET;
- dd->ipath_rcvhdrsize = rhdrsize;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
- dd->ipath_rcvhdrsize);
- ipath_cdbg(VERBOSE, "Set protocol header size to %u\n",
- dd->ipath_rcvhdrsize);
- }
- return ret;
-}
-
-/*
- * debugging code and stats updates if no pio buffers available.
- */
-static noinline void no_pio_bufs(struct ipath_devdata *dd)
-{
- unsigned long *shadow = dd->ipath_pioavailshadow;
- __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma;
-
- dd->ipath_upd_pio_shadow = 1;
-
- /*
- * not atomic, but if we lose a stat count in a while, that's OK
- */
- ipath_stats.sps_nopiobufs++;
- if (!(++dd->ipath_consec_nopiobuf % 100000)) {
- ipath_force_pio_avail_update(dd); /* at start */
- ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
- "%llx %llx %llx %llx\n"
- "ipath shadow: %lx %lx %lx %lx\n",
- dd->ipath_consec_nopiobuf,
- (unsigned long)get_cycles(),
- (unsigned long long) le64_to_cpu(dma[0]),
- (unsigned long long) le64_to_cpu(dma[1]),
- (unsigned long long) le64_to_cpu(dma[2]),
- (unsigned long long) le64_to_cpu(dma[3]),
- shadow[0], shadow[1], shadow[2], shadow[3]);
- /*
- * 4 buffers per byte, 4 registers above, cover rest
- * below
- */
- if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
- (sizeof(shadow[0]) * 4 * 4))
- ipath_dbg("2nd group: dmacopy: "
- "%llx %llx %llx %llx\n"
- "ipath shadow: %lx %lx %lx %lx\n",
- (unsigned long long)le64_to_cpu(dma[4]),
- (unsigned long long)le64_to_cpu(dma[5]),
- (unsigned long long)le64_to_cpu(dma[6]),
- (unsigned long long)le64_to_cpu(dma[7]),
- shadow[4], shadow[5], shadow[6], shadow[7]);
-
- /* at end, so update likely happened */
- ipath_reset_availshadow(dd);
- }
-}
-
-/*
- * common code for normal driver pio buffer allocation, and reserved
- * allocation.
- *
- * do appropriate marking as busy, etc.
- * returns buffer number if one found (>=0), negative number is error.
- */
-static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd,
- u32 *pbufnum, u32 first, u32 last, u32 firsti)
-{
- int i, j, updated = 0;
- unsigned piobcnt;
- unsigned long flags;
- unsigned long *shadow = dd->ipath_pioavailshadow;
- u32 __iomem *buf;
-
- piobcnt = last - first;
- if (dd->ipath_upd_pio_shadow) {
- /*
- * Minor optimization. If we had no buffers on last call,
- * start out by doing the update; continue and do scan even
- * if no buffers were updated, to be paranoid
- */
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- } else
- i = firsti;
-rescan:
- /*
- * while test_and_set_bit() is atomic, we do that and then the
- * change_bit(), and the pair is not. See if this is the cause
- * of the remaining armlaunch errors.
- */
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (j = 0; j < piobcnt; j++, i++) {
- if (i >= last)
- i = first;
- if (__test_and_set_bit((2 * i) + 1, shadow))
- continue;
- /* flip generation bit */
- __change_bit(2 * i, shadow);
- break;
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-
- if (j == piobcnt) {
- if (!updated) {
- /*
- * first time through; shadow exhausted, but may be
- * buffers available, try an update and then rescan.
- */
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- goto rescan;
- } else if (updated == 1 && piobcnt <=
- ((dd->ipath_sendctrl
- >> INFINIPATH_S_UPDTHRESH_SHIFT) &
- INFINIPATH_S_UPDTHRESH_MASK)) {
- /*
- * for chips supporting and using the update
- * threshold we need to force an update of the
- * in-memory copy if the count is less than the
- * thershold, then check one more time.
- */
- ipath_force_pio_avail_update(dd);
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- goto rescan;
- }
-
- no_pio_bufs(dd);
- buf = NULL;
- } else {
- if (i < dd->ipath_piobcnt2k)
- buf = (u32 __iomem *) (dd->ipath_pio2kbase +
- i * dd->ipath_palign);
- else
- buf = (u32 __iomem *)
- (dd->ipath_pio4kbase +
- (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
- if (pbufnum)
- *pbufnum = i;
- }
-
- return buf;
-}
-
-/**
- * ipath_getpiobuf - find an available pio buffer
- * @dd: the infinipath device
- * @plen: the size of the PIO buffer needed in 32-bit words
- * @pbufnum: the buffer number is placed here
- */
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum)
-{
- u32 __iomem *buf;
- u32 pnum, nbufs;
- u32 first, lasti;
-
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS) {
- first = dd->ipath_piobcnt2k;
- lasti = dd->ipath_lastpioindexl;
- } else {
- first = 0;
- lasti = dd->ipath_lastpioindex;
- }
- nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti);
-
- if (buf) {
- /*
- * Set next starting place. It's just an optimization,
- * it doesn't matter who wins on this, so no locking
- */
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
- dd->ipath_lastpioindexl = pnum + 1;
- else
- dd->ipath_lastpioindex = pnum + 1;
- if (dd->ipath_upd_pio_shadow)
- dd->ipath_upd_pio_shadow = 0;
- if (dd->ipath_consec_nopiobuf)
- dd->ipath_consec_nopiobuf = 0;
- ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
- pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf);
- if (pbufnum)
- *pbufnum = pnum;
-
- }
- return buf;
-}
-
-/**
- * ipath_chg_pioavailkernel - change which send buffers are available for kernel
- * @dd: the infinipath device
- * @start: the starting send buffer number
- * @len: the number of send buffers
- * @avail: true if the buffers are available for kernel use, false otherwise
- */
-void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
- unsigned len, int avail)
-{
- unsigned long flags;
- unsigned end, cnt = 0;
-
- /* There are two bits per send buffer (busy and generation) */
- start *= 2;
- end = start + len * 2;
-
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- /* Set or clear the busy bit in the shadow. */
- while (start < end) {
- if (avail) {
- unsigned long dma;
- int i, im;
- /*
- * the BUSY bit will never be set, because we disarm
- * the user buffers before we hand them back to the
- * kernel. We do have to make sure the generation
- * bit is set correctly in shadow, since it could
- * have changed many times while allocated to user.
- * We can't use the bitmap functions on the full
- * dma array because it is always little-endian, so
- * we have to flip to host-order first.
- * BITS_PER_LONG is slightly wrong, since it's
- * always 64 bits per register in chip...
- * We only work on 64 bit kernels, so that's OK.
- */
- /* deal with 6110 chip bug on high register #s */
- i = start / BITS_PER_LONG;
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
- + start, dd->ipath_pioavailshadow);
- dma = (unsigned long) le64_to_cpu(
- dd->ipath_pioavailregs_dma[im]);
- if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start) % BITS_PER_LONG, &dma))
- __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start, dd->ipath_pioavailshadow);
- else
- __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start, dd->ipath_pioavailshadow);
- __set_bit(start, dd->ipath_pioavailkernel);
- } else {
- __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
- dd->ipath_pioavailshadow);
- __clear_bit(start, dd->ipath_pioavailkernel);
- }
- start += 2;
- }
-
- if (dd->ipath_pioupd_thresh) {
- end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
- cnt = bitmap_weight(dd->ipath_pioavailkernel, end);
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-
- /*
- * When moving buffers from kernel to user, if number assigned to
- * the user is less than the pio update threshold, and threshold
- * is supported (cnt was computed > 0), drop the update threshold
- * so we update at least once per allocated number of buffers.
- * In any case, if the kernel buffers are less than the threshold,
- * drop the threshold. We don't bother increasing it, having once
- * decreased it, since it would typically just cycle back and forth.
- * If we don't decrease below buffers in use, we can wait a long
- * time for an update, until some other context uses PIO buffers.
- */
- if (!avail && len < cnt)
- cnt = len;
- if (cnt < dd->ipath_pioupd_thresh) {
- dd->ipath_pioupd_thresh = cnt;
- ipath_dbg("Decreased pio update threshold to %u\n",
- dd->ipath_pioupd_thresh);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
- << INFINIPATH_S_UPDTHRESH_SHIFT);
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-}
-
-/**
- * ipath_create_rcvhdrq - create a receive header queue
- * @dd: the infinipath device
- * @pd: the port data
- *
- * this must be contiguous memory (from an i/o perspective), and must be
- * DMA'able (which means for some systems, it will go through an IOMMU,
- * or be forced into a low address range).
- */
-int ipath_create_rcvhdrq(struct ipath_devdata *dd,
- struct ipath_portdata *pd)
-{
- int ret = 0;
-
- if (!pd->port_rcvhdrq) {
- dma_addr_t phys_hdrqtail;
- gfp_t gfp_flags = GFP_USER | __GFP_COMP;
- int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE);
-
- pd->port_rcvhdrq = dma_alloc_coherent(
- &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
- gfp_flags);
-
- if (!pd->port_rcvhdrq) {
- ipath_dev_err(dd, "attempt to allocate %d bytes "
- "for port %u rcvhdrq failed\n",
- amt, pd->port_port);
- ret = -ENOMEM;
- goto bail;
- }
-
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
- GFP_KERNEL);
- if (!pd->port_rcvhdrtail_kvaddr) {
- ipath_dev_err(dd, "attempt to allocate 1 page "
- "for port %u rcvhdrqtailaddr "
- "failed\n", pd->port_port);
- ret = -ENOMEM;
- dma_free_coherent(&dd->pcidev->dev, amt,
- pd->port_rcvhdrq,
- pd->port_rcvhdrq_phys);
- pd->port_rcvhdrq = NULL;
- goto bail;
- }
- pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
- ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx "
- "physical\n", pd->port_port,
- (unsigned long long) phys_hdrqtail);
- }
-
- pd->port_rcvhdrq_size = amt;
-
- ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu "
- "for port %u rcvhdr Q\n",
- amt >> PAGE_SHIFT, pd->port_rcvhdrq,
- (unsigned long) pd->port_rcvhdrq_phys,
- (unsigned long) pd->port_rcvhdrq_size,
- pd->port_port);
- } else {
- ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
- "hdrtailaddr@%p %llx physical\n",
- pd->port_port, pd->port_rcvhdrq,
- (unsigned long long) pd->port_rcvhdrq_phys,
- pd->port_rcvhdrtail_kvaddr, (unsigned long long)
- pd->port_rcvhdrqtailaddr_phys);
- }
- /* clear for security and sanity on each use */
- memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
- if (pd->port_rcvhdrtail_kvaddr)
- memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
-
- /*
- * tell chip each time we init it, even if we are re-using previous
- * memory (we zero the register at process close)
- */
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
- pd->port_port, pd->port_rcvhdrqtailaddr_phys);
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
- pd->port_port, pd->port_rcvhdrq_phys);
-
-bail:
- return ret;
-}
-
-
-/*
- * Flush all sends that might be in the ready to send state, as well as any
- * that are in the process of being sent. Used whenever we need to be
- * sure the send side is idle. Cleans up all buffer state by canceling
- * all pio buffers, and issuing an abort, which cleans up anything in the
- * launch fifo. The cancel is superfluous on some chip versions, but
- * it's safer to always do it.
- * PIOAvail bits are updated by the chip as if normal send had happened.
- */
-void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
-{
- unsigned long flags;
-
- if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
- ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
- goto bail;
- }
- /*
- * If we have SDMA, and it's not disabled, we have to kick off the
- * abort state machine, provided we aren't already aborting.
- * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
- * we skip the rest of this routine. It is already "in progress"
- */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
- int skip_cancel;
- unsigned long *statp = &dd->ipath_sdma_status;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- skip_cancel =
- test_and_set_bit(IPATH_SDMA_ABORTING, statp)
- && !test_bit(IPATH_SDMA_DISABLED, statp);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (skip_cancel)
- goto bail;
- }
-
- ipath_dbg("Cancelling all in-progress send buffers\n");
-
- /* skip armlaunch errs for a while */
- dd->ipath_lastcancel = jiffies + HZ / 2;
-
- /*
- * The abort bit is auto-clearing. We also don't want pioavail
- * update happening during this, and we don't want any other
- * sends going out, so turn those off for the duration. We read
- * the scratch register to be sure that cancels and the abort
- * have taken effect in the chip. Otherwise two parts are same
- * as ipath_force_pio_avail_update()
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
- | INFINIPATH_S_PIOENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl | INFINIPATH_S_ABORT);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* disarm all send buffers */
- ipath_disarm_piobufs(dd, 0,
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
-
- if (restore_sendctrl) {
- /* else done by caller later if needed */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
- INFINIPATH_S_PIOENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- /* and again, be sure all have hit the chip */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-
- if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
- !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
- test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- /* only wait so long for intr */
- dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
- dd->ipath_sdma_reset_wait = 200;
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- }
-bail:;
-}
-
-/*
- * Force an update of in-memory copy of the pioavail registers, when
- * needed for any of a variety of reasons. We read the scratch register
- * to make it highly likely that the update will have happened by the
- * time we return. If already off (as in cancel_sends above), this
- * routine is a nop, on the assumption that the caller will "do the
- * right thing".
- */
-void ipath_force_pio_avail_update(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- }
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-}
-
-static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd,
- int linitcmd)
-{
- u64 mod_wd;
- static const char *what[4] = {
- [0] = "NOP",
- [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN",
- [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
- [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
- };
-
- if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) {
- /*
- * If we are told to disable, note that so link-recovery
- * code does not attempt to bring us back up.
- */
- preempt_disable();
- dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
- preempt_enable();
- } else if (linitcmd) {
- /*
- * Any other linkinitcmd will lead to LINKDOWN and then
- * to INIT (if all is well), so clear flag to let
- * link-recovery code attempt to bring us back up.
- */
- preempt_disable();
- dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
- preempt_enable();
- }
-
- mod_wd = (linkcmd << dd->ibcc_lc_shift) |
- (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT);
- ipath_cdbg(VERBOSE,
- "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n",
- dd->ipath_unit, what[linkcmd], linitcmd,
- ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl | mod_wd);
- /* read from chip so write is flushed */
- (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-}
-
-int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
-{
- u32 lstate;
- int ret;
-
- switch (newstate) {
- case IPATH_IB_LINKDOWN_ONLY:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_POLL);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN_SLEEP:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_SLEEP);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN_DISABLE:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_DISABLE);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKARM:
- if (dd->ipath_flags & IPATH_LINKARMED) {
- ret = 0;
- goto bail;
- }
- if (!(dd->ipath_flags &
- (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
- ret = -EINVAL;
- goto bail;
- }
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0);
-
- /*
- * Since the port can transition to ACTIVE by receiving
- * a non VL 15 packet, wait for either state.
- */
- lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
- break;
-
- case IPATH_IB_LINKACTIVE:
- if (dd->ipath_flags & IPATH_LINKACTIVE) {
- ret = 0;
- goto bail;
- }
- if (!(dd->ipath_flags & IPATH_LINKARMED)) {
- ret = -EINVAL;
- goto bail;
- }
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0);
- lstate = IPATH_LINKACTIVE;
- break;
-
- case IPATH_IB_LINK_LOOPBACK:
- dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n");
- dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
-
- /* turn heartbeat off, as it causes loopback to fail */
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_OFF);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINK_EXTERNAL:
- dev_info(&dd->pcidev->dev,
- "Disabling IB local loopback (normal)\n");
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_ON);
- dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- /* don't wait */
- ret = 0;
- goto bail;
-
- /*
- * Heartbeat can be explicitly enabled by the user via
- * "hrtbt_enable" "file", and if disabled, trying to enable here
- * will have no effect. Implicit changes (heartbeat off when
- * loopback on, and vice versa) are included to ease testing.
- */
- case IPATH_IB_LINK_HRTBT:
- ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_ON);
- goto bail;
-
- case IPATH_IB_LINK_NO_HRTBT:
- ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_OFF);
- goto bail;
-
- default:
- ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
- ret = -EINVAL;
- goto bail;
- }
- ret = ipath_wait_linkstate(dd, lstate, 2000);
-
-bail:
- return ret;
-}
-
-/**
- * ipath_set_mtu - set the MTU
- * @dd: the infinipath device
- * @arg: the new MTU
- *
- * we can handle "any" incoming size, the issue here is whether we
- * need to restrict our outgoing size. For now, we don't do any
- * sanity checking on this, and we don't deal with what happens to
- * programs that are already running when the size changes.
- * NOTE: changing the MTU will usually cause the IBC to go back to
- * link INIT state...
- */
-int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
-{
- u32 piosize;
- int changed = 0;
- int ret;
-
- /*
- * mtu is IB data payload max. It's the largest power of 2 less
- * than piosize (or even larger, since it only really controls the
- * largest we can receive; we can send the max of the mtu and
- * piosize). We check that it's one of the valid IB sizes.
- */
- if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
- (arg != 4096 || !ipath_mtu4096)) {
- ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
- ret = -EINVAL;
- goto bail;
- }
- if (dd->ipath_ibmtu == arg) {
- ret = 0; /* same as current */
- goto bail;
- }
-
- piosize = dd->ipath_ibmaxlen;
- dd->ipath_ibmtu = arg;
-
- if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
- /* Only if it's not the initial value (or reset to it) */
- if (piosize != dd->ipath_init_ibmaxlen) {
- if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
- piosize = dd->ipath_init_ibmaxlen;
- dd->ipath_ibmaxlen = piosize;
- changed = 1;
- }
- } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
- piosize = arg + IPATH_PIO_MAXIBHDR;
- ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
- "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
- arg);
- dd->ipath_ibmaxlen = piosize;
- changed = 1;
- }
-
- if (changed) {
- u64 ibc = dd->ipath_ibcctrl, ibdw;
- /*
- * update our housekeeping variables, and set IBC max
- * size, same as init code; max IBC is max we allow in
- * buffer, less the qword pbc, plus 1 for ICRC, in dwords
- */
- dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
- ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
- ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
- dd->ibcc_mpl_shift);
- ibc |= ibdw << dd->ibcc_mpl_shift;
- dd->ipath_ibcctrl = ibc;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- dd->ipath_f_tidtemplate(dd);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc)
-{
- dd->ipath_lid = lid;
- dd->ipath_lmc = lmc;
-
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid |
- (~((1U << lmc) - 1)) << 16);
-
- dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid);
-
- return 0;
-}
-
-
-/**
- * ipath_write_kreg_port - write a device's per-port 64-bit kernel register
- * @dd: the infinipath device
- * @regno: the register number to write
- * @port: the port containing the register
- * @value: the value to write
- *
- * Registers that vary with the chip implementation constants (port)
- * use this routine.
- */
-void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno,
- unsigned port, u64 value)
-{
- u16 where;
-
- if (port < dd->ipath_portcnt &&
- (regno == dd->ipath_kregs->kr_rcvhdraddr ||
- regno == dd->ipath_kregs->kr_rcvhdrtailaddr))
- where = regno + port;
- else
- where = -1;
-
- ipath_write_kreg(dd, where, value);
-}
-
-/*
- * Following deal with the "obviously simple" task of overriding the state
- * of the LEDS, which normally indicate link physical and logical status.
- * The complications arise in dealing with different hardware mappings
- * and the board-dependent routine being called from interrupts.
- * and then there's the requirement to _flash_ them.
- */
-#define LED_OVER_FREQ_SHIFT 8
-#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
-/* Below is "non-zero" to force override, but both actual LEDs are off */
-#define LED_OVER_BOTH_OFF (8)
-
-static void ipath_run_led_override(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
- int timeoff;
- int pidx;
- u64 lstate, ltstate, val;
-
- if (!(dd->ipath_flags & IPATH_INITTED))
- return;
-
- pidx = dd->ipath_led_override_phase++ & 1;
- dd->ipath_led_override = dd->ipath_led_override_vals[pidx];
- timeoff = dd->ipath_led_override_timeoff;
-
- /*
- * below potentially restores the LED values per current status,
- * should also possibly setup the traffic-blink register,
- * but leave that to per-chip functions.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ltstate = ipath_ib_linktrstate(dd, val);
- lstate = ipath_ib_linkstate(dd, val);
-
- dd->ipath_f_setextled(dd, lstate, ltstate);
- mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
-}
-
-void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val)
-{
- int timeoff, freq;
-
- if (!(dd->ipath_flags & IPATH_INITTED))
- return;
-
- /* First check if we are blinking. If not, use 1HZ polling */
- timeoff = HZ;
- freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;
-
- if (freq) {
- /* For blink, set each phase from one nybble of val */
- dd->ipath_led_override_vals[0] = val & 0xF;
- dd->ipath_led_override_vals[1] = (val >> 4) & 0xF;
- timeoff = (HZ << 4)/freq;
- } else {
- /* Non-blink set both phases the same. */
- dd->ipath_led_override_vals[0] = val & 0xF;
- dd->ipath_led_override_vals[1] = val & 0xF;
- }
- dd->ipath_led_override_timeoff = timeoff;
-
- /*
- * If the timer has not already been started, do so. Use a "quick"
- * timeout so the function will be called soon, to look at our request.
- */
- if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) {
- /* Need to start timer */
- setup_timer(&dd->ipath_led_override_timer,
- ipath_run_led_override, (unsigned long)dd);
-
- dd->ipath_led_override_timer.expires = jiffies + 1;
- add_timer(&dd->ipath_led_override_timer);
- } else
- atomic_dec(&dd->ipath_led_override_timer_active);
-}
-
-/**
- * ipath_shutdown_device - shut down a device
- * @dd: the infinipath device
- *
- * This is called to make the device quiet when we are about to
- * unload the driver, and also when the device is administratively
- * disabled. It does not free any data structures.
- * Everything it does has to be setup again by ipath_init_chip(dd,1)
- */
-void ipath_shutdown_device(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- ipath_dbg("Shutting down the device\n");
-
- ipath_hol_up(dd); /* make sure user processes aren't suspended */
-
- dd->ipath_flags |= IPATH_LINKUNK;
- dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
- IPATH_LINKINIT | IPATH_LINKARMED |
- IPATH_LINKACTIVE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF |
- IPATH_STATUS_IB_READY);
-
- /* mask interrupts, but not errors */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
-
- dd->ipath_rcvctrl = 0;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- teardown_sdma(dd);
-
- /*
- * gracefully stop all sends allowing any in progress to trickle out
- * first.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = 0;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- /* flush it */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /*
- * enough for anything that's going to trickle out to have actually
- * done so.
- */
- udelay(5);
-
- dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
-
- ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
- ipath_cancel_sends(dd, 0);
-
- /*
- * we are shutting down, so tell components that care. We don't do
- * this on just a link state change, much like ethernet, a cable
- * unplug, etc. doesn't change driver state
- */
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
-
- /* disable IBC */
- dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control | INFINIPATH_C_FREEZEMODE);
-
- /*
- * clear SerdesEnable and turn the leds off; do this here because
- * we are unloading, so don't count on interrupts to move along
- * Turn the LEDs off explicitly for the same reason.
- */
- dd->ipath_f_quiet_serdes(dd);
-
- /* stop all the timers that might still be running */
- del_timer_sync(&dd->ipath_hol_timer);
- if (dd->ipath_stats_timer_active) {
- del_timer_sync(&dd->ipath_stats_timer);
- dd->ipath_stats_timer_active = 0;
- }
- if (dd->ipath_intrchk_timer.data) {
- del_timer_sync(&dd->ipath_intrchk_timer);
- dd->ipath_intrchk_timer.data = 0;
- }
- if (atomic_read(&dd->ipath_led_override_timer_active)) {
- del_timer_sync(&dd->ipath_led_override_timer);
- atomic_set(&dd->ipath_led_override_timer_active, 0);
- }
-
- /*
- * clear all interrupts and errors, so that the next time the driver
- * is loaded or device is enabled, we know that whatever is set
- * happened while we were unloaded
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
-
- ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n");
- ipath_update_eeprom_log(dd);
-}
-
-/**
- * ipath_free_pddata - free a port's allocated data
- * @dd: the infinipath device
- * @pd: the portdata structure
- *
- * free up any allocated data for a port
- * This should not touch anything that would affect a simultaneous
- * re-allocation of port data, because it is called after ipath_mutex
- * is released (and can be called from reinit as well).
- * It should never change any chip state, or global driver state.
- * (The only exception to global state is freeing the port0 port0_skbs.)
- */
-void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
-{
- if (!pd)
- return;
-
- if (pd->port_rcvhdrq) {
- ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
- "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
- (unsigned long) pd->port_rcvhdrq_size);
- dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
- pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
- pd->port_rcvhdrq = NULL;
- if (pd->port_rcvhdrtail_kvaddr) {
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- pd->port_rcvhdrtail_kvaddr,
- pd->port_rcvhdrqtailaddr_phys);
- pd->port_rcvhdrtail_kvaddr = NULL;
- }
- }
- if (pd->port_port && pd->port_rcvegrbuf) {
- unsigned e;
-
- for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
- void *base = pd->port_rcvegrbuf[e];
- size_t size = pd->port_rcvegrbuf_size;
-
- ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
- "chunk %u/%u\n", base,
- (unsigned long) size,
- e, pd->port_rcvegrbuf_chunks);
- dma_free_coherent(&dd->pcidev->dev, size,
- base, pd->port_rcvegrbuf_phys[e]);
- }
- kfree(pd->port_rcvegrbuf);
- pd->port_rcvegrbuf = NULL;
- kfree(pd->port_rcvegrbuf_phys);
- pd->port_rcvegrbuf_phys = NULL;
- pd->port_rcvegrbuf_chunks = 0;
- } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
- unsigned e;
- struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;
-
- dd->ipath_port0_skbinfo = NULL;
- ipath_cdbg(VERBOSE, "free closed port %d "
- "ipath_port0_skbinfo @ %p\n", pd->port_port,
- skbinfo);
- for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++)
- if (skbinfo[e].skb) {
- pci_unmap_single(dd->pcidev, skbinfo[e].phys,
- dd->ipath_ibmaxlen,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(skbinfo[e].skb);
- }
- vfree(skbinfo);
- }
- kfree(pd->port_tid_pg_list);
- vfree(pd->subport_uregbase);
- vfree(pd->subport_rcvegrbuf);
- vfree(pd->subport_rcvhdr_base);
- kfree(pd);
-}
-
-static int __init infinipath_init(void)
-{
- int ret;
-
- if (ipath_debug & __IPATH_DBG)
- printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);
-
- /*
- * These must be called before the driver is registered with
- * the PCI subsystem.
- */
- idr_init(&unit_table);
-
- ret = pci_register_driver(&ipath_driver);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Unable to register driver: error %d\n", -ret);
- goto bail_unit;
- }
-
- ret = ipath_init_ipathfs();
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
- "ipathfs: error %d\n", -ret);
- goto bail_pci;
- }
-
- goto bail;
-
-bail_pci:
- pci_unregister_driver(&ipath_driver);
-
-bail_unit:
- idr_destroy(&unit_table);
-
-bail:
- return ret;
-}
-
-static void __exit infinipath_cleanup(void)
-{
- ipath_exit_ipathfs();
-
- ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
- pci_unregister_driver(&ipath_driver);
-
- idr_destroy(&unit_table);
-}
-
-/**
- * ipath_reset_device - reset the chip if possible
- * @unit: the device to reset
- *
- * Whether or not reset is successful, we attempt to re-initialize the chip
- * (that is, much like a driver unload/reload). We clear the INITTED flag
- * so that the various entry points will fail until we reinitialize. For
- * now, we only allow this if no user ports are open that use chip resources
- */
-int ipath_reset_device(int unit)
-{
- int ret, i;
- struct ipath_devdata *dd = ipath_lookup(unit);
- unsigned long flags;
-
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
-
- if (atomic_read(&dd->ipath_led_override_timer_active)) {
- /* Need to stop LED timer, _then_ shut off LEDs */
- del_timer_sync(&dd->ipath_led_override_timer);
- atomic_set(&dd->ipath_led_override_timer_active, 0);
- }
-
- /* Shut off LEDs after we are sure timer is not running */
- dd->ipath_led_override = LED_OVER_BOTH_OFF;
- dd->ipath_f_setextled(dd, 0, 0);
-
- dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit);
-
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) {
- dev_info(&dd->pcidev->dev, "Invalid unit number %u or "
- "not initialized or not present\n", unit);
- ret = -ENXIO;
- goto bail;
- }
-
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- if (dd->ipath_pd)
- for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
- continue;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- ipath_dbg("unit %u port %d is in use "
- "(PID %u cmd %s), can't reset\n",
- unit, i,
- pid_nr(dd->ipath_pd[i]->port_pid),
- dd->ipath_pd[i]->port_comm);
- ret = -EBUSY;
- goto bail;
- }
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- teardown_sdma(dd);
-
- dd->ipath_flags &= ~IPATH_INITTED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- ret = dd->ipath_f_reset(dd);
- if (ret == 1) {
- ipath_dbg("Reinitializing unit %u after reset attempt\n",
- unit);
- ret = ipath_init_chip(dd, 1);
- } else
- ret = -EAGAIN;
- if (ret)
- ipath_dev_err(dd, "Reinitialize unit %u after "
- "reset failed with %d\n", unit, ret);
- else
- dev_info(&dd->pcidev->dev, "Reinitialized unit %u after "
- "resetting\n", unit);
-
-bail:
- return ret;
-}
-
-/*
- * send a signal to all the processes that have the driver open
- * through the normal interfaces (i.e., everything other than diags
- * interface). Returns number of signalled processes.
- */
-static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
-{
- int i, sub, any = 0;
- struct pid *pid;
- unsigned long flags;
-
- if (!dd->ipath_pd)
- return 0;
-
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
- continue;
- pid = dd->ipath_pd[i]->port_pid;
- if (!pid)
- continue;
-
- dev_info(&dd->pcidev->dev, "context %d in use "
- "(PID %u), sending signal %d\n",
- i, pid_nr(pid), sig);
- kill_pid(pid, sig, 1);
- any++;
- for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
- pid = dd->ipath_pd[i]->port_subpid[sub];
- if (!pid)
- continue;
- dev_info(&dd->pcidev->dev, "sub-context "
- "%d:%d in use (PID %u), sending "
- "signal %d\n", i, sub, pid_nr(pid), sig);
- kill_pid(pid, sig, 1);
- any++;
- }
- }
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- return any;
-}
-
-static void ipath_hol_signal_down(struct ipath_devdata *dd)
-{
- if (ipath_signal_procs(dd, SIGSTOP))
- ipath_dbg("Stopped some processes\n");
- ipath_cancel_sends(dd, 1);
-}
-
-
-static void ipath_hol_signal_up(struct ipath_devdata *dd)
-{
- if (ipath_signal_procs(dd, SIGCONT))
- ipath_dbg("Continued some processes\n");
-}
-
-/*
- * link is down, stop any users processes, and flush pending sends
- * to prevent HoL blocking, then start the HoL timer that
- * periodically continues, then stop procs, so they can detect
- * link down if they want, and do something about it.
- * Timer may already be running, so use mod_timer, not add_timer.
- */
-void ipath_hol_down(struct ipath_devdata *dd)
-{
- dd->ipath_hol_state = IPATH_HOL_DOWN;
- ipath_hol_signal_down(dd);
- dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
- dd->ipath_hol_timer.expires = jiffies +
- msecs_to_jiffies(ipath_hol_timeout_ms);
- mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
-}
-
-/*
- * link is up, continue any user processes, and ensure timer
- * is a nop, if running. Let timer keep running, if set; it
- * will nop when it sees the link is up
- */
-void ipath_hol_up(struct ipath_devdata *dd)
-{
- ipath_hol_signal_up(dd);
- dd->ipath_hol_state = IPATH_HOL_UP;
-}
-
-/*
- * toggle the running/not running state of user proceses
- * to prevent HoL blocking on chip resources, but still allow
- * user processes to do link down special case handling.
- * Should only be called via the timer
- */
-void ipath_hol_event(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
- && dd->ipath_hol_state != IPATH_HOL_UP) {
- dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
- ipath_dbg("Stopping processes\n");
- ipath_hol_signal_down(dd);
- } else { /* may do "extra" if also in ipath_hol_up() */
- dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
- ipath_dbg("Continuing processes\n");
- ipath_hol_signal_up(dd);
- }
- if (dd->ipath_hol_state == IPATH_HOL_UP)
- ipath_dbg("link's up, don't resched timer\n");
- else {
- dd->ipath_hol_timer.expires = jiffies +
- msecs_to_jiffies(ipath_hol_timeout_ms);
- mod_timer(&dd->ipath_hol_timer,
- dd->ipath_hol_timer.expires);
- }
-}
-
-int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
-{
- u64 val;
-
- if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK)
- return -1;
- if (dd->ipath_rx_pol_inv != new_pol_inv) {
- dd->ipath_rx_pol_inv = new_pol_inv;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
- INFINIPATH_XGXS_RX_POL_SHIFT);
- val |= ((u64)dd->ipath_rx_pol_inv) <<
- INFINIPATH_XGXS_RX_POL_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- }
- return 0;
-}
-
-/*
- * Disable and enable the armlaunch error. Used for PIO bandwidth testing on
- * the 7220, which is count-based, rather than trigger-based. Safe for the
- * driver check, since it's at init. Not completely safe when used for
- * user-mode checking, since some error checking can be lost, but not
- * particularly risky, and only has problematic side-effects in the face of
- * very buggy user code. There is no reference counting, but that's also
- * fine, given the intended use.
- */
-void ipath_enable_armlaunch(struct ipath_devdata *dd)
-{
- dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- INFINIPATH_E_SPIOARMLAUNCH);
- dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-}
-
-void ipath_disable_armlaunch(struct ipath_devdata *dd)
-{
- /* so don't re-enable if already set */
- dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH;
- dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-}
-
-module_init(infinipath_init);
-module_exit(infinipath_cleanup);
diff --git a/drivers/staging/rdma/ipath/ipath_eeprom.c b/drivers/staging/rdma/ipath/ipath_eeprom.c
deleted file mode 100644
index ef84107..0000000
--- a/drivers/staging/rdma/ipath/ipath_eeprom.c
+++ /dev/null
@@ -1,1183 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-
-/*
- * InfiniPath I2C driver for a serial eeprom. This is not a generic
- * I2C interface. For a start, the device we're using (Atmel AT24C11)
- * doesn't work like a regular I2C device. It looks like one
- * electrically, but not logically. Normal I2C devices have a single
- * 7-bit or 10-bit I2C address that they respond to. Valid 7-bit
- * addresses range from 0x03 to 0x77. Addresses 0x00 to 0x02 and 0x78
- * to 0x7F are special reserved addresses (e.g. 0x00 is the "general
- * call" address.) The Atmel device, on the other hand, responds to ALL
- * 7-bit addresses. It's designed to be the only device on a given I2C
- * bus. A 7-bit address corresponds to the memory address within the
- * Atmel device itself.
- *
- * Also, the timing requirements mean more than simple software
- * bitbanging, with readbacks from chip to ensure timing (simple udelay
- * is not enough).
- *
- * This all means that accessing the device is specialized enough
- * that using the standard kernel I2C bitbanging interface would be
- * impossible. For example, the core I2C eeprom driver expects to find
- * a device at one or more of a limited set of addresses only. It doesn't
- * allow writing to an eeprom. It also doesn't provide any means of
- * accessing eeprom contents from within the kernel, only via sysfs.
- */
-
-/* Added functionality for IBA7220-based cards */
-#define IPATH_EEPROM_DEV_V1 0xA0
-#define IPATH_EEPROM_DEV_V2 0xA2
-#define IPATH_TEMP_DEV 0x98
-#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
-#define IPATH_NO_DEV (0xFF)
-
-/*
- * The number of I2C chains is proliferating. Table below brings
- * some order to the madness. The basic principle is that the
- * table is scanned from the top, and a "probe" is made to the
- * device probe_dev. If that succeeds, the chain is considered
- * to be of that type, and dd->i2c_chain_type is set to the index+1
- * of the entry.
- * The +1 is so static initialization can mean "unknown, do probe."
- */
-static struct i2c_chain_desc {
- u8 probe_dev; /* If seen at probe, chain is this type */
- u8 eeprom_dev; /* Dev addr (if any) for EEPROM */
- u8 temp_dev; /* Dev Addr (if any) for Temp-sense */
-} i2c_chains[] = {
- { IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
- { IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
- { IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
- { IPATH_NO_DEV }
-};
-
-enum i2c_type {
- i2c_line_scl = 0,
- i2c_line_sda
-};
-
-enum i2c_state {
- i2c_line_low = 0,
- i2c_line_high
-};
-
-#define READ_CMD 1
-#define WRITE_CMD 0
-
-/**
- * i2c_gpio_set - set a GPIO line
- * @dd: the infinipath device
- * @line: the line to set
- * @new_line_state: the state to set
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error.
- */
-static int i2c_gpio_set(struct ipath_devdata *dd,
- enum i2c_type line,
- enum i2c_state new_line_state)
-{
- u64 out_mask, dir_mask, *gpioval;
- unsigned long flags = 0;
-
- gpioval = &dd->ipath_gpio_out;
-
- if (line == i2c_line_scl) {
- dir_mask = dd->ipath_gpio_scl;
- out_mask = (1UL << dd->ipath_gpio_scl_num);
- } else {
- dir_mask = dd->ipath_gpio_sda;
- out_mask = (1UL << dd->ipath_gpio_sda_num);
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- if (new_line_state == i2c_line_high) {
- /* tri-state the output rather than force high */
- dd->ipath_extctrl &= ~dir_mask;
- } else {
- /* config line to be an output */
- dd->ipath_extctrl |= dir_mask;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
-
- /* set output as well (no real verify) */
- if (new_line_state == i2c_line_high)
- *gpioval |= out_mask;
- else
- *gpioval &= ~out_mask;
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- return 0;
-}
-
-/**
- * i2c_gpio_get - get a GPIO line state
- * @dd: the infinipath device
- * @line: the line to get
- * @curr_statep: where to put the line state
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error. curr_state is not set on error.
- */
-static int i2c_gpio_get(struct ipath_devdata *dd,
- enum i2c_type line,
- enum i2c_state *curr_statep)
-{
- u64 read_val, mask;
- int ret;
- unsigned long flags = 0;
-
- /* check args */
- if (curr_statep == NULL) {
- ret = 1;
- goto bail;
- }
-
- /* config line to be an input */
- if (line == i2c_line_scl)
- mask = dd->ipath_gpio_scl;
- else
- mask = dd->ipath_gpio_sda;
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- dd->ipath_extctrl &= ~mask;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
- /*
- * Below is very unlikely to reflect true input state if Output
- * Enable actually changed.
- */
- read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- if (read_val & mask)
- *curr_statep = i2c_line_high;
- else
- *curr_statep = i2c_line_low;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * i2c_wait_for_writes - wait for a write
- * @dd: the infinipath device
- *
- * We use this instead of udelay directly, so we can make sure
- * that previous register writes have been flushed all the way
- * to the chip. Since we are delaying anyway, the cost doesn't
- * hurt, and makes the bit twiddling more regular
- */
-static void i2c_wait_for_writes(struct ipath_devdata *dd)
-{
- (void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- rmb();
-}
-
-static void scl_out(struct ipath_devdata *dd, u8 bit)
-{
- udelay(1);
- i2c_gpio_set(dd, i2c_line_scl, bit ? i2c_line_high : i2c_line_low);
-
- i2c_wait_for_writes(dd);
-}
-
-static void sda_out(struct ipath_devdata *dd, u8 bit)
-{
- i2c_gpio_set(dd, i2c_line_sda, bit ? i2c_line_high : i2c_line_low);
-
- i2c_wait_for_writes(dd);
-}
-
-static u8 sda_in(struct ipath_devdata *dd, int wait)
-{
- enum i2c_state bit;
-
- if (i2c_gpio_get(dd, i2c_line_sda, &bit))
- ipath_dbg("get bit failed!\n");
-
- if (wait)
- i2c_wait_for_writes(dd);
-
- return bit == i2c_line_high ? 1U : 0;
-}
-
-/**
- * i2c_ackrcv - see if ack following write is true
- * @dd: the infinipath device
- */
-static int i2c_ackrcv(struct ipath_devdata *dd)
-{
- u8 ack_received;
-
- /* AT ENTRY SCL = LOW */
- /* change direction, ignore data */
- ack_received = sda_in(dd, 1);
- scl_out(dd, i2c_line_high);
- ack_received = sda_in(dd, 1) == 0;
- scl_out(dd, i2c_line_low);
- return ack_received;
-}
-
-/**
- * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
- * @dd: the infinipath device
- *
- * Returns byte shifted out of device
- */
-static int rd_byte(struct ipath_devdata *dd)
-{
- int bit_cntr, data;
-
- data = 0;
-
- for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
- data <<= 1;
- scl_out(dd, i2c_line_high);
- data |= sda_in(dd, 0);
- scl_out(dd, i2c_line_low);
- }
- return data;
-}
-
-/**
- * wr_byte - write a byte, one bit at a time
- * @dd: the infinipath device
- * @data: the byte to write
- *
- * Returns 0 if we got the following ack, otherwise 1
- */
-static int wr_byte(struct ipath_devdata *dd, u8 data)
-{
- int bit_cntr;
- u8 bit;
-
- for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
- bit = (data >> bit_cntr) & 1;
- sda_out(dd, bit);
- scl_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_low);
- }
- return (!i2c_ackrcv(dd)) ? 1 : 0;
-}
-
-static void send_ack(struct ipath_devdata *dd)
-{
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_high);
-}
-
-/**
- * i2c_startcmd - transmit the start condition, followed by address/cmd
- * @dd: the infinipath device
- * @offset_dir: direction byte
- *
- * (both clock/data high, clock high, data low while clock is high)
- */
-static int i2c_startcmd(struct ipath_devdata *dd, u8 offset_dir)
-{
- int res;
-
- /* issue start sequence */
- sda_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_low);
-
- /* issue length and direction byte */
- res = wr_byte(dd, offset_dir);
-
- if (res)
- ipath_cdbg(VERBOSE, "No ack to complete start\n");
-
- return res;
-}
-
-/**
- * stop_cmd - transmit the stop condition
- * @dd: the infinipath device
- *
- * (both clock/data low, clock high, data high while clock is high)
- */
-static void stop_cmd(struct ipath_devdata *dd)
-{
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_high);
- udelay(2);
-}
-
-/**
- * eeprom_reset - reset I2C communication
- * @dd: the infinipath device
- */
-
-static int eeprom_reset(struct ipath_devdata *dd)
-{
- int clock_cycles_left = 9;
- u64 *gpioval = &dd->ipath_gpio_out;
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- /* Make sure shadows are consistent */
- dd->ipath_extctrl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
- *gpioval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_out);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
- "is %llx\n", (unsigned long long) *gpioval);
-
- /*
- * This is to get the i2c into a known state, by first going low,
- * then tristate sda (and then tristate scl as first thing
- * in loop)
- */
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_high);
-
- /* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
- while (clock_cycles_left--) {
- scl_out(dd, i2c_line_high);
-
- /* SDA seen high, issue START by dropping it while SCL high */
- if (sda_in(dd, 0)) {
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_low);
- /* ATMEL spec says must be followed by STOP. */
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_high);
- ret = 0;
- goto bail;
- }
-
- scl_out(dd, i2c_line_low);
- }
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/*
- * Probe for I2C device at specified address. Returns 0 for "success"
- * to match rest of this file.
- * Leave bus in "reasonable" state for further commands.
- */
-static int i2c_probe(struct ipath_devdata *dd, int devaddr)
-{
- int ret;
-
- ret = eeprom_reset(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
- devaddr);
- return ret;
- }
- /*
- * Reset no longer leaves bus in start condition, so normal
- * i2c_startcmd() will do.
- */
- ret = i2c_startcmd(dd, devaddr | READ_CMD);
- if (ret)
- ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
- devaddr);
- else {
- /*
- * Device did respond. Complete a single-byte read, because some
- * devices apparently cannot handle STOP immediately after they
- * ACK the start-cmd.
- */
- int data;
- data = rd_byte(dd);
- stop_cmd(dd);
- ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
- }
- return ret;
-}
-
-/*
- * Returns the "i2c type". This is a pointer to a struct that describes
- * the I2C chain on this board. To minimize impact on struct ipath_devdata,
- * the (small integer) index into the table is actually memoized, rather
- * then the pointer.
- * Memoization is because the type is determined on the first call per chip.
- * An alternative would be to move type determination to early
- * init code.
- */
-static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
-{
- int idx;
-
- /* Get memoized index, from previous successful probes */
- idx = dd->ipath_i2c_chain_type - 1;
- if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
- goto done;
-
- idx = 0;
- while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
- /* if probe succeeds, this is type */
- if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
- break;
- ++idx;
- }
-
- /*
- * Old EEPROM (first entry) may require a reset after probe,
- * rather than being able to "start" after "stop"
- */
- if (idx == 0)
- eeprom_reset(dd);
-
- if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
- idx = -1;
- else
- dd->ipath_i2c_chain_type = idx + 1;
-done:
- return (idx >= 0) ? i2c_chains + idx : NULL;
-}
-
-static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
- u8 eeprom_offset, void *buffer, int len)
-{
- int ret;
- struct i2c_chain_desc *icd;
- u8 *bp = buffer;
-
- ret = 1;
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->eeprom_dev == IPATH_NO_DEV) {
- /* legacy not-really-I2C */
- ipath_cdbg(VERBOSE, "Start command only address\n");
- eeprom_offset = (eeprom_offset << 1) | READ_CMD;
- ret = i2c_startcmd(dd, eeprom_offset);
- } else {
- /* Actual I2C */
- ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
- if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
- ipath_dbg("Failed EEPROM startcmd\n");
- stop_cmd(dd);
- ret = 1;
- goto bail;
- }
- ret = wr_byte(dd, eeprom_offset);
- stop_cmd(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed to write EEPROM address\n");
- ret = 1;
- goto bail;
- }
- ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
- }
- if (ret) {
- ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
- stop_cmd(dd);
- ret = 1;
- goto bail;
- }
-
- /*
- * eeprom keeps clocking data out as long as we ack, automatically
- * incrementing the address.
- */
- while (len-- > 0) {
- /* get and store data */
- *bp++ = rd_byte(dd);
- /* send ack if not the last byte */
- if (len)
- send_ack(dd);
- }
-
- stop_cmd(dd);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
- const void *buffer, int len)
-{
- int sub_len;
- const u8 *bp = buffer;
- int max_wait_time, i;
- int ret;
- struct i2c_chain_desc *icd;
-
- ret = 1;
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- while (len > 0) {
- if (icd->eeprom_dev == IPATH_NO_DEV) {
- if (i2c_startcmd(dd,
- (eeprom_offset << 1) | WRITE_CMD)) {
- ipath_dbg("Failed to start cmd offset %u\n",
- eeprom_offset);
- goto failed_write;
- }
- } else {
- /* Real I2C */
- if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
- ipath_dbg("Failed EEPROM startcmd\n");
- goto failed_write;
- }
- ret = wr_byte(dd, eeprom_offset);
- if (ret) {
- ipath_dev_err(dd, "Failed to write EEPROM "
- "address\n");
- goto failed_write;
- }
- }
-
- sub_len = min(len, 4);
- eeprom_offset += sub_len;
- len -= sub_len;
-
- for (i = 0; i < sub_len; i++) {
- if (wr_byte(dd, *bp++)) {
- ipath_dbg("no ack after byte %u/%u (%u "
- "total remain)\n", i, sub_len,
- len + sub_len - i);
- goto failed_write;
- }
- }
-
- stop_cmd(dd);
-
- /*
- * wait for write complete by waiting for a successful
- * read (the chip replies with a zero after the write
- * cmd completes, and before it writes to the eeprom.
- * The startcmd for the read will fail the ack until
- * the writes have completed. We do this inline to avoid
- * the debug prints that are in the real read routine
- * if the startcmd fails.
- * We also use the proper device address, so it doesn't matter
- * whether we have real eeprom_dev. legacy likes any address.
- */
- max_wait_time = 100;
- while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
- stop_cmd(dd);
- if (!--max_wait_time) {
- ipath_dbg("Did not get successful read to "
- "complete write\n");
- goto failed_write;
- }
- }
- /* now read (and ignore) the resulting byte */
- rd_byte(dd);
- stop_cmd(dd);
- }
-
- ret = 0;
- goto bail;
-
-failed_write:
- stop_cmd(dd);
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_eeprom_read - receives bytes from the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: address to read from
- * @buffer: where to store result
- * @len: number of bytes to receive
- */
-int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
- void *buff, int len)
-{
- int ret;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_eeprom_internal_read(dd, eeprom_offset, buff, len);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- return ret;
-}
-
-/**
- * ipath_eeprom_write - writes data to the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: where to place data
- * @buffer: data to write
- * @len: number of bytes to write
- */
-int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
- const void *buff, int len)
-{
- int ret;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_eeprom_internal_write(dd, eeprom_offset, buff, len);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- return ret;
-}
-
-static u8 flash_csum(struct ipath_flash *ifp, int adjust)
-{
- u8 *ip = (u8 *) ifp;
- u8 csum = 0, len;
-
- /*
- * Limit length checksummed to max length of actual data.
- * Checksum of erased eeprom will still be bad, but we avoid
- * reading past the end of the buffer we were passed.
- */
- len = ifp->if_length;
- if (len > sizeof(struct ipath_flash))
- len = sizeof(struct ipath_flash);
- while (len--)
- csum += *ip++;
- csum -= ifp->if_csum;
- csum = ~csum;
- if (adjust)
- ifp->if_csum = csum;
-
- return csum;
-}
-
-/**
- * ipath_get_guid - get the GUID from the i2c device
- * @dd: the infinipath device
- *
- * We have the capability to use the ipath_nguid field, and get
- * the guid from the first chip's flash, to use for all of them.
- */
-void ipath_get_eeprom_info(struct ipath_devdata *dd)
-{
- void *buf;
- struct ipath_flash *ifp;
- __be64 guid;
- int len, eep_stat;
- u8 csum, *bguid;
- int t = dd->ipath_unit;
- struct ipath_devdata *dd0 = ipath_lookup(0);
-
- if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) {
- u8 oguid;
- dd->ipath_guid = dd0->ipath_guid;
- bguid = (u8 *) & dd->ipath_guid;
-
- oguid = bguid[7];
- bguid[7] += t;
- if (oguid > bguid[7]) {
- if (bguid[6] == 0xff) {
- if (bguid[5] == 0xff) {
- ipath_dev_err(
- dd,
- "Can't set %s GUID from "
- "base, wraps to OUI!\n",
- ipath_get_unit_name(t));
- dd->ipath_guid = 0;
- goto bail;
- }
- bguid[5]++;
- }
- bguid[6]++;
- }
- dd->ipath_nguid = 1;
-
- ipath_dbg("nguid %u, so adding %u to device 0 guid, "
- "for %llx\n",
- dd0->ipath_nguid, t,
- (unsigned long long) be64_to_cpu(dd->ipath_guid));
- goto bail;
- }
-
- /*
- * read full flash, not just currently used part, since it may have
- * been written with a newer definition
- * */
- len = sizeof(struct ipath_flash);
- buf = vmalloc(len);
- if (!buf) {
- ipath_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for GUID\n", len);
- goto bail;
- }
-
- mutex_lock(&dd->ipath_eep_lock);
- eep_stat = ipath_eeprom_internal_read(dd, 0, buf, len);
- mutex_unlock(&dd->ipath_eep_lock);
-
- if (eep_stat) {
- ipath_dev_err(dd, "Failed reading GUID from eeprom\n");
- goto done;
- }
- ifp = (struct ipath_flash *)buf;
-
- csum = flash_csum(ifp, 0);
- if (csum != ifp->if_csum) {
- dev_info(&dd->pcidev->dev, "Bad I2C flash checksum: "
- "0x%x, not 0x%x\n", csum, ifp->if_csum);
- goto done;
- }
- if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
- *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
- ipath_dev_err(dd, "Invalid GUID %llx from flash; "
- "ignoring\n",
- *(unsigned long long *) ifp->if_guid);
- /* don't allow GUID if all 0 or all 1's */
- goto done;
- }
-
- /* complain, but allow it */
- if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
- dev_info(&dd->pcidev->dev, "Warning, GUID %llx is "
- "default, probably not correct!\n",
- *(unsigned long long *) ifp->if_guid);
-
- bguid = ifp->if_guid;
- if (!bguid[0] && !bguid[1] && !bguid[2]) {
- /* original incorrect GUID format in flash; fix in
- * core copy, by shifting up 2 octets; don't need to
- * change top octet, since both it and shifted are
- * 0.. */
- bguid[1] = bguid[3];
- bguid[2] = bguid[4];
- bguid[3] = bguid[4] = 0;
- guid = *(__be64 *) ifp->if_guid;
- ipath_cdbg(VERBOSE, "Old GUID format in flash, top 3 zero, "
- "shifting 2 octets\n");
- } else
- guid = *(__be64 *) ifp->if_guid;
- dd->ipath_guid = guid;
- dd->ipath_nguid = ifp->if_numguid;
- /*
- * Things are slightly complicated by the desire to transparently
- * support both the Pathscale 10-digit serial number and the QLogic
- * 13-character version.
- */
- if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
- && ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
- /* This board has a Serial-prefix, which is stored
- * elsewhere for backward-compatibility.
- */
- char *snp = dd->ipath_serial;
- memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
- snp[sizeof ifp->if_sprefix] = '\0';
- len = strlen(snp);
- snp += len;
- len = (sizeof dd->ipath_serial) - len;
- if (len > sizeof ifp->if_serial) {
- len = sizeof ifp->if_serial;
- }
- memcpy(snp, ifp->if_serial, len);
- } else
- memcpy(dd->ipath_serial, ifp->if_serial,
- sizeof ifp->if_serial);
- if (!strstr(ifp->if_comment, "Tested successfully"))
- ipath_dev_err(dd, "Board SN %s did not pass functional "
- "test: %s\n", dd->ipath_serial,
- ifp->if_comment);
-
- ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
- (unsigned long long) be64_to_cpu(dd->ipath_guid));
-
- memcpy(&dd->ipath_eep_st_errs, &ifp->if_errcntp, IPATH_EEP_LOG_CNT);
- /*
- * Power-on (actually "active") hours are kept as little-endian value
- * in EEPROM, but as seconds in a (possibly as small as 24-bit)
- * atomic_t while running.
- */
- atomic_set(&dd->ipath_active_time, 0);
- dd->ipath_eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
-
-done:
- vfree(buf);
-
-bail:;
-}
-
-/**
- * ipath_update_eeprom_log - copy active-time and error counters to eeprom
- * @dd: the infinipath device
- *
- * Although the time is kept as seconds in the ipath_devdata struct, it is
- * rounded to hours for re-write, as we have only 16 bits in EEPROM.
- * First-cut code reads whole (expected) struct ipath_flash, modifies,
- * re-writes. Future direction: read/write only what we need, assuming
- * that the EEPROM had to have been "good enough" for driver init, and
- * if not, we aren't making it worse.
- *
- */
-
-int ipath_update_eeprom_log(struct ipath_devdata *dd)
-{
- void *buf;
- struct ipath_flash *ifp;
- int len, hi_water;
- uint32_t new_time, new_hrs;
- u8 csum;
- int ret, idx;
- unsigned long flags;
-
- /* first, check if we actually need to do anything. */
- ret = 0;
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- if (dd->ipath_eep_st_new_errs[idx]) {
- ret = 1;
- break;
- }
- }
- new_time = atomic_read(&dd->ipath_active_time);
-
- if (ret == 0 && new_time < 3600)
- return 0;
-
- /*
- * The quick-check above determined that there is something worthy
- * of logging, so get current contents and do a more detailed idea.
- * read full flash, not just currently used part, since it may have
- * been written with a newer definition
- */
- len = sizeof(struct ipath_flash);
- buf = vmalloc(len);
- ret = 1;
- if (!buf) {
- ipath_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for logging\n", len);
- goto bail;
- }
-
- /* Grab semaphore and read current EEPROM. If we get an
- * error, let go, but if not, keep it until we finish write.
- */
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (ret) {
- ipath_dev_err(dd, "Unable to acquire EEPROM for logging\n");
- goto free_bail;
- }
- ret = ipath_eeprom_internal_read(dd, 0, buf, len);
- if (ret) {
- mutex_unlock(&dd->ipath_eep_lock);
- ipath_dev_err(dd, "Unable read EEPROM for logging\n");
- goto free_bail;
- }
- ifp = (struct ipath_flash *)buf;
-
- csum = flash_csum(ifp, 0);
- if (csum != ifp->if_csum) {
- mutex_unlock(&dd->ipath_eep_lock);
- ipath_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
- csum, ifp->if_csum);
- ret = 1;
- goto free_bail;
- }
- hi_water = 0;
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- int new_val = dd->ipath_eep_st_new_errs[idx];
- if (new_val) {
- /*
- * If we have seen any errors, add to EEPROM values
- * We need to saturate at 0xFF (255) and we also
- * would need to adjust the checksum if we were
- * trying to minimize EEPROM traffic
- * Note that we add to actual current count in EEPROM,
- * in case it was altered while we were running.
- */
- new_val += ifp->if_errcntp[idx];
- if (new_val > 0xFF)
- new_val = 0xFF;
- if (ifp->if_errcntp[idx] != new_val) {
- ifp->if_errcntp[idx] = new_val;
- hi_water = offsetof(struct ipath_flash,
- if_errcntp) + idx;
- }
- /*
- * update our shadow (used to minimize EEPROM
- * traffic), to match what we are about to write.
- */
- dd->ipath_eep_st_errs[idx] = new_val;
- dd->ipath_eep_st_new_errs[idx] = 0;
- }
- }
- /*
- * now update active-time. We would like to round to the nearest hour
- * but unless atomic_t are sure to be proper signed ints we cannot,
- * because we need to account for what we "transfer" to EEPROM and
- * if we log an hour at 31 minutes, then we would need to set
- * active_time to -29 to accurately count the _next_ hour.
- */
- if (new_time >= 3600) {
- new_hrs = new_time / 3600;
- atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
- new_hrs += dd->ipath_eep_hrs;
- if (new_hrs > 0xFFFF)
- new_hrs = 0xFFFF;
- dd->ipath_eep_hrs = new_hrs;
- if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
- ifp->if_powerhour[0] = new_hrs & 0xFF;
- hi_water = offsetof(struct ipath_flash, if_powerhour);
- }
- if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
- ifp->if_powerhour[1] = new_hrs >> 8;
- hi_water = offsetof(struct ipath_flash, if_powerhour)
- + 1;
- }
- }
- /*
- * There is a tiny possibility that we could somehow fail to write
- * the EEPROM after updating our shadows, but problems from holding
- * the spinlock too long are a much bigger issue.
- */
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
- if (hi_water) {
- /* we made some change to the data, uopdate cksum and write */
- csum = flash_csum(ifp, 1);
- ret = ipath_eeprom_internal_write(dd, 0, buf, hi_water + 1);
- }
- mutex_unlock(&dd->ipath_eep_lock);
- if (ret)
- ipath_dev_err(dd, "Failed updating EEPROM\n");
-
-free_bail:
- vfree(buf);
-bail:
- return ret;
-
-}
-
-/**
- * ipath_inc_eeprom_err - increment one of the four error counters
- * that are logged to EEPROM.
- * @dd: the infinipath device
- * @eidx: 0..3, the counter to increment
- * @incr: how much to add
- *
- * Each counter is 8-bits, and saturates at 255 (0xFF). They
- * are copied to the EEPROM (aka flash) whenever ipath_update_eeprom_log()
- * is called, but it can only be called in a context that allows sleep.
- * This function can be called even at interrupt level.
- */
-
-void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr)
-{
- uint new_val;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- new_val = dd->ipath_eep_st_new_errs[eidx] + incr;
- if (new_val > 255)
- new_val = 255;
- dd->ipath_eep_st_new_errs[eidx] = new_val;
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
- return;
-}
-
-static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
-{
- int ret;
- struct i2c_chain_desc *icd;
-
- ret = -ENOENT;
-
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->temp_dev == IPATH_NO_DEV) {
- /* tempsense only exists on new, real-I2C boards */
- ret = -ENXIO;
- goto bail;
- }
-
- if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
- ipath_dbg("Failed tempsense startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, regnum);
- stop_cmd(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
- regnum);
- ret = -ENXIO;
- goto bail;
- }
- if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
- ipath_dbg("Failed tempsense RD startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- /*
- * We can only clock out one byte per command, sensibly
- */
- ret = rd_byte(dd);
- stop_cmd(dd);
-
-bail:
- return ret;
-}
-
-#define VALID_TS_RD_REG_MASK 0xBF
-
-/**
- * ipath_tempsense_read - read register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to read from
- *
- * returns reg contents (0..255) or < 0 for error
- */
-int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
-{
- int ret;
-
- if (regnum > 7)
- return -EINVAL;
-
- /* return a bogus value for (the one) register we do not have */
- if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
- return 0;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_tempsense_internal_read(dd, regnum);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- /*
- * There are three possibilities here:
- * ret is actual value (0..255)
- * ret is -ENXIO or -EINVAL from code in this file
- * ret is -EINTR from mutex_lock_interruptible.
- */
- return ret;
-}
-
-static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
- u8 regnum, u8 data)
-{
- int ret = -ENOENT;
- struct i2c_chain_desc *icd;
-
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->temp_dev == IPATH_NO_DEV) {
- /* tempsense only exists on new, real-I2C boards */
- ret = -ENXIO;
- goto bail;
- }
- if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
- ipath_dbg("Failed tempsense startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, regnum);
- if (ret) {
- stop_cmd(dd);
- ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
- regnum);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, data);
- stop_cmd(dd);
- ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
- if (ret) {
- ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
- regnum);
- ret = -ENXIO;
- }
-
-bail:
- return ret;
-}
-
-#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
-
-/**
- * ipath_tempsense_write - write register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to write
- * @data: data to write
- *
- * returns 0 for success or < 0 for error
- */
-int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
-{
- int ret;
-
- if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
- return -EINVAL;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_tempsense_internal_write(dd, regnum, data);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- /*
- * There are three possibilities here:
- * ret is 0 for success
- * ret is -ENXIO or -EINVAL from code in this file
- * ret is -EINTR from mutex_lock_interruptible.
- */
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_file_ops.c b/drivers/staging/rdma/ipath/ipath_file_ops.c
deleted file mode 100644
index 6187b84..0000000
--- a/drivers/staging/rdma/ipath/ipath_file_ops.c
+++ /dev/null
@@ -1,2619 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/poll.h>
-#include <linux/cdev.h>
-#include <linux/swap.h>
-#include <linux/export.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/highmem.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/cpu.h>
-#include <linux/uio.h>
-#include <asm/pgtable.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-#include "ipath_user_sdma.h"
-
-static int ipath_open(struct inode *, struct file *);
-static int ipath_close(struct inode *, struct file *);
-static ssize_t ipath_write(struct file *, const char __user *, size_t,
- loff_t *);
-static ssize_t ipath_write_iter(struct kiocb *, struct iov_iter *from);
-static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
-static int ipath_mmap(struct file *, struct vm_area_struct *);
-
-/*
- * This is really, really weird shit - write() and writev() here
- * have completely unrelated semantics. Sucky userland ABI,
- * film at 11.
- */
-static const struct file_operations ipath_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_write,
- .write_iter = ipath_write_iter,
- .open = ipath_open,
- .release = ipath_close,
- .poll = ipath_poll,
- .mmap = ipath_mmap,
- .llseek = noop_llseek,
-};
-
-/*
- * Convert kernel virtual addresses to physical addresses so they don't
- * potentially conflict with the chip addresses used as mmap offsets.
- * It doesn't really matter what mmap offset we use as long as we can
- * interpret it correctly.
- */
-static u64 cvt_kvaddr(void *p)
-{
- struct page *page;
- u64 paddr = 0;
-
- page = vmalloc_to_page(p);
- if (page)
- paddr = page_to_pfn(page) << PAGE_SHIFT;
-
- return paddr;
-}
-
-static int ipath_get_base_info(struct file *fp,
- void __user *ubase, size_t ubase_size)
-{
- struct ipath_portdata *pd = port_fp(fp);
- int ret = 0;
- struct ipath_base_info *kinfo = NULL;
- struct ipath_devdata *dd = pd->port_dd;
- unsigned subport_cnt;
- int shared, master;
- size_t sz;
-
- subport_cnt = pd->port_subport_cnt;
- if (!subport_cnt) {
- shared = 0;
- master = 0;
- subport_cnt = 1;
- } else {
- shared = 1;
- master = !subport_fp(fp);
- }
-
- sz = sizeof(*kinfo);
- /* If port sharing is not requested, allow the old size structure */
- if (!shared)
- sz -= 7 * sizeof(u64);
- if (ubase_size < sz) {
- ipath_cdbg(PROC,
- "Base size %zu, need %zu (version mismatch?)\n",
- ubase_size, sz);
- ret = -EINVAL;
- goto bail;
- }
-
- kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL);
- if (kinfo == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- ret = dd->ipath_f_get_base_info(pd, kinfo);
- if (ret < 0)
- goto bail;
-
- kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt;
- kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize;
- kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt;
- kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize;
- /*
- * have to mmap whole thing
- */
- kinfo->spi_rcv_egrbuftotlen =
- pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
- kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
- kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
- pd->port_rcvegrbuf_chunks;
- kinfo->spi_tidcnt = dd->ipath_rcvtidcnt / subport_cnt;
- if (master)
- kinfo->spi_tidcnt += dd->ipath_rcvtidcnt % subport_cnt;
- /*
- * for this use, may be ipath_cfgports summed over all chips that
- * are are configured and present
- */
- kinfo->spi_nports = dd->ipath_cfgports;
- /* unit (chip/board) our port is on */
- kinfo->spi_unit = dd->ipath_unit;
- /* for now, only a single page */
- kinfo->spi_tid_maxsize = PAGE_SIZE;
-
- /*
- * Doing this per port, and based on the skip value, etc. This has
- * to be the actual buffer size, since the protocol code treats it
- * as an array.
- *
- * These have to be set to user addresses in the user code via mmap.
- * These values are used on return to user code for the mmap target
- * addresses only. For 32 bit, same 44 bit address problem, so use
- * the physical address, not virtual. Before 2.6.11, using the
- * page_address() macro worked, but in 2.6.11, even that returns the
- * full 64 bit address (upper bits all 1's). So far, using the
- * physical addresses (or chip offsets, for chip mapping) works, but
- * no doubt some future kernel release will change that, and we'll be
- * on to yet another method of dealing with this.
- */
- kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
- kinfo->spi_rcvhdr_tailaddr = (u64) pd->port_rcvhdrqtailaddr_phys;
- kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
- kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
- kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
- (void *) dd->ipath_statusp -
- (void *) dd->ipath_pioavailregs_dma;
- if (!shared) {
- kinfo->spi_piocnt = pd->port_piocnt;
- kinfo->spi_piobufbase = (u64) pd->port_piobufs;
- kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
- dd->ipath_ureg_align * pd->port_port;
- } else if (master) {
- kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
- (pd->port_piocnt % subport_cnt);
- /* Master's PIO buffers are after all the slave's */
- kinfo->spi_piobufbase = (u64) pd->port_piobufs +
- dd->ipath_palign *
- (pd->port_piocnt - kinfo->spi_piocnt);
- } else {
- unsigned slave = subport_fp(fp) - 1;
-
- kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
- kinfo->spi_piobufbase = (u64) pd->port_piobufs +
- dd->ipath_palign * kinfo->spi_piocnt * slave;
- }
-
- if (shared) {
- kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
- dd->ipath_ureg_align * pd->port_port;
- kinfo->spi_port_rcvegrbuf = kinfo->spi_rcv_egrbufs;
- kinfo->spi_port_rcvhdr_base = kinfo->spi_rcvhdr_base;
- kinfo->spi_port_rcvhdr_tailaddr = kinfo->spi_rcvhdr_tailaddr;
-
- kinfo->__spi_uregbase = cvt_kvaddr(pd->subport_uregbase +
- PAGE_SIZE * subport_fp(fp));
-
- kinfo->spi_rcvhdr_base = cvt_kvaddr(pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport_fp(fp));
- kinfo->spi_rcvhdr_tailaddr = 0;
- kinfo->spi_rcv_egrbufs = cvt_kvaddr(pd->subport_rcvegrbuf +
- pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size *
- subport_fp(fp));
-
- kinfo->spi_subport_uregbase =
- cvt_kvaddr(pd->subport_uregbase);
- kinfo->spi_subport_rcvegrbuf =
- cvt_kvaddr(pd->subport_rcvegrbuf);
- kinfo->spi_subport_rcvhdr_base =
- cvt_kvaddr(pd->subport_rcvhdr_base);
- ipath_cdbg(PROC, "port %u flags %x %llx %llx %llx\n",
- kinfo->spi_port, kinfo->spi_runtime_flags,
- (unsigned long long) kinfo->spi_subport_uregbase,
- (unsigned long long) kinfo->spi_subport_rcvegrbuf,
- (unsigned long long) kinfo->spi_subport_rcvhdr_base);
- }
-
- /*
- * All user buffers are 2KB buffers. If we ever support
- * giving 4KB buffers to user processes, this will need some
- * work.
- */
- kinfo->spi_pioindex = (kinfo->spi_piobufbase -
- (dd->ipath_piobufbase & 0xffffffff)) / dd->ipath_palign;
- kinfo->spi_pioalign = dd->ipath_palign;
-
- kinfo->spi_qpair = IPATH_KD_QP;
- /*
- * user mode PIO buffers are always 2KB, even when 4KB can
- * be received, and sent via the kernel; this is ibmaxlen
- * for 2K MTU.
- */
- kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
- kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
- kinfo->spi_port = pd->port_port;
- kinfo->spi_subport = subport_fp(fp);
- kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
- kinfo->spi_hw_version = dd->ipath_revision;
-
- if (master) {
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_MASTER;
- }
-
- sz = (ubase_size < sizeof(*kinfo)) ? ubase_size : sizeof(*kinfo);
- if (copy_to_user(ubase, kinfo, sz))
- ret = -EFAULT;
-
-bail:
- kfree(kinfo);
- return ret;
-}
-
-/**
- * ipath_tid_update - update a port TID
- * @pd: the port
- * @fp: the ipath device file
- * @ti: the TID information
- *
- * The new implementation as of Oct 2004 is that the driver assigns
- * the tid and returns it to the caller. To make it easier to
- * catch bugs, and to reduce search time, we keep a cursor for
- * each port, walking the shadow tid array to find one that's not
- * in use.
- *
- * For now, if we can't allocate the full list, we fail, although
- * in the long run, we'll allocate as many as we can, and the
- * caller will deal with that by trying the remaining pages later.
- * That means that when we fail, we have to mark the tids as not in
- * use again, in our shadow copy.
- *
- * It's up to the caller to free the tids when they are done.
- * We'll unlock the pages as they free them.
- *
- * Also, right now we are locking one page at a time, but since
- * the intended use of this routine is for a single group of
- * virtually contiguous pages, that should change to improve
- * performance.
- */
-static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
- const struct ipath_tid_info *ti)
-{
- int ret = 0, ntids;
- u32 tid, porttid, cnt, i, tidcnt, tidoff;
- u16 *tidlist;
- struct ipath_devdata *dd = pd->port_dd;
- u64 physaddr;
- unsigned long vaddr;
- u64 __iomem *tidbase;
- unsigned long tidmap[8];
- struct page **pagep = NULL;
- unsigned subport = subport_fp(fp);
-
- if (!dd->ipath_pageshadow) {
- ret = -ENOMEM;
- goto done;
- }
-
- cnt = ti->tidcnt;
- if (!cnt) {
- ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
- (unsigned long long) ti->tidlist);
- /*
- * Should we treat as success? likely a bug
- */
- ret = -EFAULT;
- goto done;
- }
- porttid = pd->port_port * dd->ipath_rcvtidcnt;
- if (!pd->port_subport_cnt) {
- tidcnt = dd->ipath_rcvtidcnt;
- tid = pd->port_tidcursor;
- tidoff = 0;
- } else if (!subport) {
- tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
- (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
- tidoff = dd->ipath_rcvtidcnt - tidcnt;
- porttid += tidoff;
- tid = tidcursor_fp(fp);
- } else {
- tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
- tidoff = tidcnt * (subport - 1);
- porttid += tidoff;
- tid = tidcursor_fp(fp);
- }
- if (cnt > tidcnt) {
- /* make sure it all fits in port_tid_pg_list */
- dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
- "TIDs, only trying max (%u)\n", cnt, tidcnt);
- cnt = tidcnt;
- }
- pagep = &((struct page **) pd->port_tid_pg_list)[tidoff];
- tidlist = &((u16 *) &pagep[dd->ipath_rcvtidcnt])[tidoff];
-
- memset(tidmap, 0, sizeof(tidmap));
- /* before decrement; chip actual # */
- ntids = tidcnt;
- tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- porttid * sizeof(*tidbase));
-
- ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n",
- pd->port_port, cnt, tid, tidbase);
-
- /* virtual address of first page in transfer */
- vaddr = ti->tidvaddr;
- if (!access_ok(VERIFY_WRITE, (void __user *) vaddr,
- cnt * PAGE_SIZE)) {
- ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
- (void *)vaddr, cnt);
- ret = -EFAULT;
- goto done;
- }
- ret = ipath_get_user_pages(vaddr, cnt, pagep);
- if (ret) {
- if (ret == -EBUSY) {
- ipath_dbg("Failed to lock addr %p, %u pages "
- "(already locked)\n",
- (void *) vaddr, cnt);
- /*
- * for now, continue, and see what happens but with
- * the new implementation, this should never happen,
- * unless perhaps the user has mpin'ed the pages
- * themselves (something we need to test)
- */
- ret = 0;
- } else {
- dev_info(&dd->pcidev->dev,
- "Failed to lock addr %p, %u pages: "
- "errno %d\n", (void *) vaddr, cnt, -ret);
- goto done;
- }
- }
- for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
- for (; ntids--; tid++) {
- if (tid == tidcnt)
- tid = 0;
- if (!dd->ipath_pageshadow[porttid + tid])
- break;
- }
- if (ntids < 0) {
- /*
- * oops, wrapped all the way through their TIDs,
- * and didn't have enough free; see comments at
- * start of routine
- */
- ipath_dbg("Not enough free TIDs for %u pages "
- "(index %d), failing\n", cnt, i);
- i--; /* last tidlist[i] not filled in */
- ret = -ENOMEM;
- break;
- }
- tidlist[i] = tid + tidoff;
- ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
- "vaddr %lx\n", i, tid + tidoff, vaddr);
- /* we "know" system pages and TID pages are same size */
- dd->ipath_pageshadow[porttid + tid] = pagep[i];
- dd->ipath_physshadow[porttid + tid] = ipath_map_page(
- dd->pcidev, pagep[i], 0, PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- /*
- * don't need atomic or it's overhead
- */
- __set_bit(tid, tidmap);
- physaddr = dd->ipath_physshadow[porttid + tid];
- ipath_stats.sps_pagelocks++;
- ipath_cdbg(VERBOSE,
- "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
- tid, vaddr, (unsigned long long) physaddr,
- pagep[i]);
- dd->ipath_f_put_tid(dd, &tidbase[tid], RCVHQ_RCV_TYPE_EXPECTED,
- physaddr);
- /*
- * don't check this tid in ipath_portshadow, since we
- * just filled it in; start with the next one.
- */
- tid++;
- }
-
- if (ret) {
- u32 limit;
- cleanup:
- /* jump here if copy out of updated info failed... */
- ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
- -ret, i, cnt);
- /* same code that's in ipath_free_tid() */
- limit = sizeof(tidmap) * BITS_PER_BYTE;
- if (limit > tidcnt)
- /* just in case size changes in future */
- limit = tidcnt;
- tid = find_first_bit((const unsigned long *)tidmap, limit);
- for (; tid < limit; tid++) {
- if (!test_bit(tid, tidmap))
- continue;
- if (dd->ipath_pageshadow[porttid + tid]) {
- ipath_cdbg(VERBOSE, "Freeing TID %u\n",
- tid);
- dd->ipath_f_put_tid(dd, &tidbase[tid],
- RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
- pci_unmap_page(dd->pcidev,
- dd->ipath_physshadow[porttid + tid],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- dd->ipath_pageshadow[porttid + tid] = NULL;
- ipath_stats.sps_pageunlocks++;
- }
- }
- ipath_release_user_pages(pagep, cnt);
- } else {
- /*
- * Copy the updated array, with ipath_tid's filled in, back
- * to user. Since we did the copy in already, this "should
- * never fail" If it does, we have to clean up...
- */
- if (copy_to_user((void __user *)
- (unsigned long) ti->tidlist,
- tidlist, cnt * sizeof(*tidlist))) {
- ret = -EFAULT;
- goto cleanup;
- }
- if (copy_to_user((void __user *) (unsigned long) ti->tidmap,
- tidmap, sizeof tidmap)) {
- ret = -EFAULT;
- goto cleanup;
- }
- if (tid == tidcnt)
- tid = 0;
- if (!pd->port_subport_cnt)
- pd->port_tidcursor = tid;
- else
- tidcursor_fp(fp) = tid;
- }
-
-done:
- if (ret)
- ipath_dbg("Failed to map %u TID pages, failing with %d\n",
- ti->tidcnt, -ret);
- return ret;
-}
-
-/**
- * ipath_tid_free - free a port TID
- * @pd: the port
- * @subport: the subport
- * @ti: the TID info
- *
- * right now we are unlocking one page at a time, but since
- * the intended use of this routine is for a single group of
- * virtually contiguous pages, that should change to improve
- * performance. We check that the TID is in range for this port
- * but otherwise don't check validity; if user has an error and
- * frees the wrong tid, it's only their own data that can thereby
- * be corrupted. We do check that the TID was in use, for sanity
- * We always use our idea of the saved address, not the address that
- * they pass in to us.
- */
-
-static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
- const struct ipath_tid_info *ti)
-{
- int ret = 0;
- u32 tid, porttid, cnt, limit, tidcnt;
- struct ipath_devdata *dd = pd->port_dd;
- u64 __iomem *tidbase;
- unsigned long tidmap[8];
-
- if (!dd->ipath_pageshadow) {
- ret = -ENOMEM;
- goto done;
- }
-
- if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap,
- sizeof tidmap)) {
- ret = -EFAULT;
- goto done;
- }
-
- porttid = pd->port_port * dd->ipath_rcvtidcnt;
- if (!pd->port_subport_cnt)
- tidcnt = dd->ipath_rcvtidcnt;
- else if (!subport) {
- tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
- (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
- porttid += dd->ipath_rcvtidcnt - tidcnt;
- } else {
- tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
- porttid += tidcnt * (subport - 1);
- }
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- porttid * sizeof(*tidbase));
-
- limit = sizeof(tidmap) * BITS_PER_BYTE;
- if (limit > tidcnt)
- /* just in case size changes in future */
- limit = tidcnt;
- tid = find_first_bit(tidmap, limit);
- ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) "
- "set is %d, porttid %u\n", pd->port_port, ti->tidcnt,
- limit, tid, porttid);
- for (cnt = 0; tid < limit; tid++) {
- /*
- * small optimization; if we detect a run of 3 or so without
- * any set, use find_first_bit again. That's mainly to
- * accelerate the case where we wrapped, so we have some at
- * the beginning, and some at the end, and a big gap
- * in the middle.
- */
- if (!test_bit(tid, tidmap))
- continue;
- cnt++;
- if (dd->ipath_pageshadow[porttid + tid]) {
- struct page *p;
- p = dd->ipath_pageshadow[porttid + tid];
- dd->ipath_pageshadow[porttid + tid] = NULL;
- ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
- pid_nr(pd->port_pid), tid);
- dd->ipath_f_put_tid(dd, &tidbase[tid],
- RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
- pci_unmap_page(dd->pcidev,
- dd->ipath_physshadow[porttid + tid],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages(&p, 1);
- ipath_stats.sps_pageunlocks++;
- } else
- ipath_dbg("Unused tid %u, ignoring\n", tid);
- }
- if (cnt != ti->tidcnt)
- ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
- ti->tidcnt, cnt);
-done:
- if (ret)
- ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
- ti->tidcnt, -ret);
- return ret;
-}
-
-/**
- * ipath_set_part_key - set a partition key
- * @pd: the port
- * @key: the key
- *
- * We can have up to 4 active at a time (other than the default, which is
- * always allowed). This is somewhat tricky, since multiple ports may set
- * the same key, so we reference count them, and clean up at exit. All 4
- * partition keys are packed into a single infinipath register. It's an
- * error for a process to set the same pkey multiple times. We provide no
- * mechanism to de-allocate a pkey at this time, we may eventually need to
- * do that. I've used the atomic operations, and no locking, and only make
- * a single pass through what's available. This should be more than
- * adequate for some time. I'll think about spinlocks or the like if and as
- * it's necessary.
- */
-static int ipath_set_part_key(struct ipath_portdata *pd, u16 key)
-{
- struct ipath_devdata *dd = pd->port_dd;
- int i, any = 0, pidx = -1;
- u16 lkey = key & 0x7FFF;
- int ret;
-
- if (lkey == (IPATH_DEFAULT_P_KEY & 0x7FFF)) {
- /* nothing to do; this key always valid */
- ret = 0;
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys "
- "%hx:%x %hx:%x %hx:%x %hx:%x\n",
- pd->port_port, key, dd->ipath_pkeys[0],
- atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
- atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
- atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
- atomic_read(&dd->ipath_pkeyrefs[3]));
-
- if (!lkey) {
- ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n",
- pd->port_port);
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * Set the full membership bit, because it has to be
- * set in the register or the packet, and it seems
- * cleaner to set in the register than to force all
- * callers to set it. (see bug 4331)
- */
- key |= 0x8000;
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- if (!pd->port_pkeys[i] && pidx == -1)
- pidx = i;
- if (pd->port_pkeys[i] == key) {
- ipath_cdbg(VERBOSE, "p%u tries to set same pkey "
- "(%x) more than once\n",
- pd->port_port, key);
- ret = -EEXIST;
- goto bail;
- }
- }
- if (pidx == -1) {
- ipath_dbg("All pkeys for port %u already in use, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
- goto bail;
- }
- for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i]) {
- any++;
- continue;
- }
- if (dd->ipath_pkeys[i] == key) {
- atomic_t *pkrefs = &dd->ipath_pkeyrefs[i];
-
- if (atomic_inc_return(pkrefs) > 1) {
- pd->port_pkeys[pidx] = key;
- ipath_cdbg(VERBOSE, "p%u set key %x "
- "matches #%d, count now %d\n",
- pd->port_port, key, i,
- atomic_read(pkrefs));
- ret = 0;
- goto bail;
- } else {
- /*
- * lost race, decrement count, catch below
- */
- atomic_dec(pkrefs);
- ipath_cdbg(VERBOSE, "Lost race, count was "
- "0, after dec, it's %d\n",
- atomic_read(pkrefs));
- any++;
- }
- }
- if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
- /*
- * It makes no sense to have both the limited and
- * full membership PKEY set at the same time since
- * the unlimited one will disable the limited one.
- */
- ret = -EEXIST;
- goto bail;
- }
- }
- if (!any) {
- ipath_dbg("port %u, all pkeys already in use, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
- goto bail;
- }
- for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i] &&
- atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
- u64 pkey;
-
- /* for ipathstats, etc. */
- ipath_stats.sps_pkeys[i] = lkey;
- pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
- pkey =
- (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(PROC, "p%u set key %x in #%d, "
- "portidx %d, new pkey reg %llx\n",
- pd->port_port, key, i, pidx,
- (unsigned long long) pkey);
- ipath_write_kreg(
- dd, dd->ipath_kregs->kr_partitionkey, pkey);
-
- ret = 0;
- goto bail;
- }
- }
- ipath_dbg("port %u, all pkeys already in use 2nd pass, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_manage_rcvq - manage a port's receive queue
- * @pd: the port
- * @subport: the subport
- * @start_stop: action to carry out
- *
- * start_stop == 0 disables receive on the port, for use in queue
- * overflow conditions. start_stop==1 re-enables, to be used to
- * re-init the software copy of the head register
- */
-static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
- int start_stop)
-{
- struct ipath_devdata *dd = pd->port_dd;
-
- ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
- start_stop ? "en" : "dis", dd->ipath_unit,
- pd->port_port, subport);
- if (subport)
- goto bail;
- /* atomically clear receive enable port. */
- if (start_stop) {
- /*
- * On enable, force in-memory copy of the tail register to
- * 0, so that protocol code doesn't have to worry about
- * whether or not the chip has yet updated the in-memory
- * copy or not on return from the system call. The chip
- * always resets it's tail register back to 0 on a
- * transition from disabled to enabled. This could cause a
- * problem if software was broken, and did the enable w/o
- * the disable, but eventually the in-memory copy will be
- * updated and correct itself, even in the face of software
- * bugs.
- */
- if (pd->port_rcvhdrtail_kvaddr)
- ipath_clear_rcvhdrtail(pd);
- set_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- } else
- clear_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* now be sure chip saw it before we return */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- if (start_stop) {
- /*
- * And try to be sure that tail reg update has happened too.
- * This should in theory interlock with the RXE changes to
- * the tail register. Don't assign it to the tail register
- * in memory copy, since we could overwrite an update by the
- * chip if we did.
- */
- ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
- }
- /* always; new head should be equal to new tail; see above */
-bail:
- return 0;
-}
-
-static void ipath_clean_part_key(struct ipath_portdata *pd,
- struct ipath_devdata *dd)
-{
- int i, j, pchanged = 0;
- u64 oldpkey;
-
- /* for debugging only */
- oldpkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- if (!pd->port_pkeys[i])
- continue;
- ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i,
- pd->port_pkeys[i]);
- for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) {
- /* check for match independent of the global bit */
- if ((dd->ipath_pkeys[j] & 0x7fff) !=
- (pd->port_pkeys[i] & 0x7fff))
- continue;
- if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
- ipath_cdbg(VERBOSE, "p%u clear key "
- "%x matches #%d\n",
- pd->port_port,
- pd->port_pkeys[i], j);
- ipath_stats.sps_pkeys[j] =
- dd->ipath_pkeys[j] = 0;
- pchanged++;
- } else {
- ipath_cdbg(VERBOSE, "p%u key %x matches #%d, "
- "but ref still %d\n", pd->port_port,
- pd->port_pkeys[i], j,
- atomic_read(&dd->ipath_pkeyrefs[j]));
- break;
- }
- }
- pd->port_pkeys[i] = 0;
- }
- if (pchanged) {
- u64 pkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, "
- "new pkey reg %llx\n", pd->port_port,
- (unsigned long long) oldpkey,
- (unsigned long long) pkey);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
- pkey);
- }
-}
-
-/*
- * Initialize the port data with the receive buffer sizes
- * so this can be done while the master port is locked.
- * Otherwise, there is a race with a slave opening the port
- * and seeing these fields uninitialized.
- */
-static void init_user_egr_sizes(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned egrperchunk, egrcnt, size;
-
- /*
- * to avoid wasting a lot of memory, we allocate 32KB chunks of
- * physically contiguous memory, advance through it until used up
- * and then allocate more. Of course, we need memory to store those
- * extra pointers, now. Started out with 256KB, but under heavy
- * memory pressure (creating large files and then copying them over
- * NFS while doing lots of MPI jobs), we hit some allocation
- * failures, even though we can sleep... (2.6.10) Still get
- * failures at 64K. 32K is the lowest we can go without wasting
- * additional memory.
- */
- size = 0x8000;
- egrperchunk = size / dd->ipath_rcvegrbufsize;
- egrcnt = dd->ipath_rcvegrcnt;
- pd->port_rcvegrbuf_chunks = (egrcnt + egrperchunk - 1) / egrperchunk;
- pd->port_rcvegrbufs_perchunk = egrperchunk;
- pd->port_rcvegrbuf_size = size;
-}
-
-/**
- * ipath_create_user_egr - allocate eager TID buffers
- * @pd: the port to allocate TID buffers for
- *
- * This routine is now quite different for user and kernel, because
- * the kernel uses skb's, for the accelerated network performance
- * This is the user port version
- *
- * Allocate the eager TID buffers and program them into infinipath
- * They are no longer completely contiguous, we do multiple allocation
- * calls.
- */
-static int ipath_create_user_egr(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
- size_t size;
- int ret;
- gfp_t gfp_flags;
-
- /*
- * GFP_USER, but without GFP_FS, so buffer cache can be
- * coalesced (we hope); otherwise, even at order 4,
- * heavy filesystem activity makes these fail, and we can
- * use compound pages.
- */
- gfp_flags = __GFP_RECLAIM | __GFP_IO | __GFP_COMP;
-
- egrcnt = dd->ipath_rcvegrcnt;
- /* TID number offset for this port */
- egroff = (pd->port_port - 1) * egrcnt + dd->ipath_p0_rcvegrcnt;
- egrsize = dd->ipath_rcvegrbufsize;
- ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
- "offset %x, egrsize %u\n", egrcnt, egroff, egrsize);
-
- chunk = pd->port_rcvegrbuf_chunks;
- egrperchunk = pd->port_rcvegrbufs_perchunk;
- size = pd->port_rcvegrbuf_size;
- pd->port_rcvegrbuf = kmalloc_array(chunk, sizeof(pd->port_rcvegrbuf[0]),
- GFP_KERNEL);
- if (!pd->port_rcvegrbuf) {
- ret = -ENOMEM;
- goto bail;
- }
- pd->port_rcvegrbuf_phys =
- kmalloc_array(chunk, sizeof(pd->port_rcvegrbuf_phys[0]),
- GFP_KERNEL);
- if (!pd->port_rcvegrbuf_phys) {
- ret = -ENOMEM;
- goto bail_rcvegrbuf;
- }
- for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
-
- pd->port_rcvegrbuf[e] = dma_alloc_coherent(
- &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
- gfp_flags);
-
- if (!pd->port_rcvegrbuf[e]) {
- ret = -ENOMEM;
- goto bail_rcvegrbuf_phys;
- }
- }
-
- pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0];
-
- for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
- dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk];
- unsigned i;
-
- for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
- dd->ipath_f_put_tid(dd, e + egroff +
- (u64 __iomem *)
- ((char __iomem *)
- dd->ipath_kregbase +
- dd->ipath_rcvegrbase),
- RCVHQ_RCV_TYPE_EAGER, pa);
- pa += egrsize;
- }
- cond_resched(); /* don't hog the cpu */
- }
-
- ret = 0;
- goto bail;
-
-bail_rcvegrbuf_phys:
- for (e = 0; e < pd->port_rcvegrbuf_chunks &&
- pd->port_rcvegrbuf[e]; e++) {
- dma_free_coherent(&dd->pcidev->dev, size,
- pd->port_rcvegrbuf[e],
- pd->port_rcvegrbuf_phys[e]);
-
- }
- kfree(pd->port_rcvegrbuf_phys);
- pd->port_rcvegrbuf_phys = NULL;
-bail_rcvegrbuf:
- kfree(pd->port_rcvegrbuf);
- pd->port_rcvegrbuf = NULL;
-bail:
- return ret;
-}
-
-
-/* common code for the mappings on dma_alloc_coherent mem */
-static int ipath_mmap_mem(struct vm_area_struct *vma,
- struct ipath_portdata *pd, unsigned len, int write_ok,
- void *kvaddr, char *what)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned long pfn;
- int ret;
-
- if ((vma->vm_end - vma->vm_start) > len) {
- dev_info(&dd->pcidev->dev,
- "FAIL on %s: len %lx > %x\n", what,
- vma->vm_end - vma->vm_start, len);
- ret = -EFAULT;
- goto bail;
- }
-
- if (!write_ok) {
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev,
- "%s must be mapped readonly\n", what);
- ret = -EPERM;
- goto bail;
- }
-
- /* don't allow them to later change with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
- }
-
- pfn = virt_to_phys(kvaddr) >> PAGE_SHIFT;
- ret = remap_pfn_range(vma, vma->vm_start, pfn,
- len, vma->vm_page_prot);
- if (ret)
- dev_info(&dd->pcidev->dev, "%s port%u mmap of %lx, %x "
- "bytes r%c failed: %d\n", what, pd->port_port,
- pfn, len, write_ok?'w':'o', ret);
- else
- ipath_cdbg(VERBOSE, "%s port%u mmaped %lx, %x bytes "
- "r%c\n", what, pd->port_port, pfn, len,
- write_ok?'w':'o');
-bail:
- return ret;
-}
-
-static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
- u64 ureg)
-{
- unsigned long phys;
- int ret;
-
- /*
- * This is real hardware, so use io_remap. This is the mechanism
- * for the user process to update the head registers for their port
- * in the chip.
- */
- if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
- dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
- "%lx > PAGE\n", vma->vm_end - vma->vm_start);
- ret = -EFAULT;
- } else {
- phys = dd->ipath_physaddr + ureg;
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
- ret = io_remap_pfn_range(vma, vma->vm_start,
- phys >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
- }
- return ret;
-}
-
-static int mmap_piobufs(struct vm_area_struct *vma,
- struct ipath_devdata *dd,
- struct ipath_portdata *pd,
- unsigned piobufs, unsigned piocnt)
-{
- unsigned long phys;
- int ret;
-
- /*
- * When we map the PIO buffers in the chip, we want to map them as
- * writeonly, no read possible. This prevents access to previous
- * process data, and catches users who might try to read the i/o
- * space due to a bug.
- */
- if ((vma->vm_end - vma->vm_start) > (piocnt * dd->ipath_palign)) {
- dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
- "reqlen %lx > PAGE\n",
- vma->vm_end - vma->vm_start);
- ret = -EINVAL;
- goto bail;
- }
-
- phys = dd->ipath_physaddr + piobufs;
-
-#if defined(__powerpc__)
- /* There isn't a generic way to specify writethrough mappings */
- pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- pgprot_val(vma->vm_page_prot) |= _PAGE_WRITETHRU;
- pgprot_val(vma->vm_page_prot) &= ~_PAGE_GUARDED;
-#endif
-
- /*
- * don't allow them to later change to readable with mprotect (for when
- * not initially mapped readable, as is normally the case)
- */
- vma->vm_flags &= ~VM_MAYREAD;
- vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
-
- ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-bail:
- return ret;
-}
-
-static int mmap_rcvegrbufs(struct vm_area_struct *vma,
- struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned long start, size;
- size_t total_size, i;
- unsigned long pfn;
- int ret;
-
- size = pd->port_rcvegrbuf_size;
- total_size = pd->port_rcvegrbuf_chunks * size;
- if ((vma->vm_end - vma->vm_start) > total_size) {
- dev_info(&dd->pcidev->dev, "FAIL on egr bufs: "
- "reqlen %lx > actual %lx\n",
- vma->vm_end - vma->vm_start,
- (unsigned long) total_size);
- ret = -EINVAL;
- goto bail;
- }
-
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev, "Can't map eager buffers as "
- "writable (flags=%lx)\n", vma->vm_flags);
- ret = -EPERM;
- goto bail;
- }
- /* don't allow them to later change to writeable with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
-
- start = vma->vm_start;
-
- for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
- pfn = virt_to_phys(pd->port_rcvegrbuf[i]) >> PAGE_SHIFT;
- ret = remap_pfn_range(vma, start, pfn, size,
- vma->vm_page_prot);
- if (ret < 0)
- goto bail;
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/*
- * ipath_file_vma_fault - handle a VMA page fault.
- */
-static int ipath_file_vma_fault(struct vm_area_struct *vma,
- struct vm_fault *vmf)
-{
- struct page *page;
-
- page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT));
- if (!page)
- return VM_FAULT_SIGBUS;
- get_page(page);
- vmf->page = page;
-
- return 0;
-}
-
-static const struct vm_operations_struct ipath_file_vm_ops = {
- .fault = ipath_file_vma_fault,
-};
-
-static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr,
- struct ipath_portdata *pd, unsigned subport)
-{
- unsigned long len;
- struct ipath_devdata *dd;
- void *addr;
- size_t size;
- int ret = 0;
-
- /* If the port is not shared, all addresses should be physical */
- if (!pd->port_subport_cnt)
- goto bail;
-
- dd = pd->port_dd;
- size = pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
-
- /*
- * Each process has all the subport uregbase, rcvhdrq, and
- * rcvegrbufs mmapped - as an array for all the processes,
- * and also separately for this process.
- */
- if (pgaddr == cvt_kvaddr(pd->subport_uregbase)) {
- addr = pd->subport_uregbase;
- size = PAGE_SIZE * pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base)) {
- addr = pd->subport_rcvhdr_base;
- size = pd->port_rcvhdrq_size * pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf)) {
- addr = pd->subport_rcvegrbuf;
- size *= pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_uregbase +
- PAGE_SIZE * subport)) {
- addr = pd->subport_uregbase + PAGE_SIZE * subport;
- size = PAGE_SIZE;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport)) {
- addr = pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport;
- size = pd->port_rcvhdrq_size;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf +
- size * subport)) {
- addr = pd->subport_rcvegrbuf + size * subport;
- /* rcvegrbufs are read-only on the slave */
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev,
- "Can't map eager buffers as "
- "writable (flags=%lx)\n", vma->vm_flags);
- ret = -EPERM;
- goto bail;
- }
- /*
- * Don't allow permission to later change to writeable
- * with mprotect.
- */
- vma->vm_flags &= ~VM_MAYWRITE;
- } else {
- goto bail;
- }
- len = vma->vm_end - vma->vm_start;
- if (len > size) {
- ipath_cdbg(MM, "FAIL: reqlen %lx > %zx\n", len, size);
- ret = -EINVAL;
- goto bail;
- }
-
- vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT;
- vma->vm_ops = &ipath_file_vm_ops;
- vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_mmap - mmap various structures into user space
- * @fp: the file pointer
- * @vma: the VM area
- *
- * We use this to have a shared buffer between the kernel and the user code
- * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
- * buffers in the chip. We have the open and close entries so we can bump
- * the ref count and keep the driver from being unloaded while still mapped.
- */
-static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
-{
- struct ipath_portdata *pd;
- struct ipath_devdata *dd;
- u64 pgaddr, ureg;
- unsigned piobufs, piocnt;
- int ret;
-
- pd = port_fp(fp);
- if (!pd) {
- ret = -EINVAL;
- goto bail;
- }
- dd = pd->port_dd;
-
- /*
- * This is the ipath_do_user_init() code, mapping the shared buffers
- * into the user process. The address referred to by vm_pgoff is the
- * file offset passed via mmap(). For shared ports, this is the
- * kernel vmalloc() address of the pages to share with the master.
- * For non-shared or master ports, this is a physical address.
- * We only do one mmap for each space mapped.
- */
- pgaddr = vma->vm_pgoff << PAGE_SHIFT;
-
- /*
- * Check for 0 in case one of the allocations failed, but user
- * called mmap anyway.
- */
- if (!pgaddr) {
- ret = -EINVAL;
- goto bail;
- }
-
- ipath_cdbg(MM, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
- (unsigned long long) pgaddr, vma->vm_start,
- vma->vm_end - vma->vm_start, dd->ipath_unit,
- pd->port_port, subport_fp(fp));
-
- /*
- * Physical addresses must fit in 40 bits for our hardware.
- * Check for kernel virtual addresses first, anything else must
- * match a HW or memory address.
- */
- ret = mmap_kvaddr(vma, pgaddr, pd, subport_fp(fp));
- if (ret) {
- if (ret > 0)
- ret = 0;
- goto bail;
- }
-
- ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
- if (!pd->port_subport_cnt) {
- /* port is not shared */
- piocnt = pd->port_piocnt;
- piobufs = pd->port_piobufs;
- } else if (!subport_fp(fp)) {
- /* caller is the master */
- piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
- (pd->port_piocnt % pd->port_subport_cnt);
- piobufs = pd->port_piobufs +
- dd->ipath_palign * (pd->port_piocnt - piocnt);
- } else {
- unsigned slave = subport_fp(fp) - 1;
-
- /* caller is a slave */
- piocnt = pd->port_piocnt / pd->port_subport_cnt;
- piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
- }
-
- if (pgaddr == ureg)
- ret = mmap_ureg(vma, dd, ureg);
- else if (pgaddr == piobufs)
- ret = mmap_piobufs(vma, dd, pd, piobufs, piocnt);
- else if (pgaddr == dd->ipath_pioavailregs_phys)
- /* in-memory copy of pioavail registers */
- ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
- (void *) dd->ipath_pioavailregs_dma,
- "pioavail registers");
- else if (pgaddr == pd->port_rcvegr_phys)
- ret = mmap_rcvegrbufs(vma, pd);
- else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
- /*
- * The rcvhdrq itself; readonly except on HT (so have
- * to allow writable mapping), multiple pages, contiguous
- * from an i/o perspective.
- */
- ret = ipath_mmap_mem(vma, pd, pd->port_rcvhdrq_size, 1,
- pd->port_rcvhdrq,
- "rcvhdrq");
- else if (pgaddr == (u64) pd->port_rcvhdrqtailaddr_phys)
- /* in-memory copy of rcvhdrq tail register */
- ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
- pd->port_rcvhdrtail_kvaddr,
- "rcvhdrq tail");
- else
- ret = -EINVAL;
-
- vma->vm_private_data = NULL;
-
- if (ret < 0)
- dev_info(&dd->pcidev->dev,
- "Failure %d on off %llx len %lx\n",
- -ret, (unsigned long long)pgaddr,
- vma->vm_end - vma->vm_start);
-bail:
- return ret;
-}
-
-static unsigned ipath_poll_hdrqfull(struct ipath_portdata *pd)
-{
- unsigned pollflag = 0;
-
- if ((pd->poll_type & IPATH_POLL_TYPE_OVERFLOW) &&
- pd->port_hdrqfull != pd->port_hdrqfull_poll) {
- pollflag |= POLLIN | POLLRDNORM;
- pd->port_hdrqfull_poll = pd->port_hdrqfull;
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll_urgent(struct ipath_portdata *pd,
- struct file *fp,
- struct poll_table_struct *pt)
-{
- unsigned pollflag = 0;
- struct ipath_devdata *dd;
-
- dd = pd->port_dd;
-
- /* variable access in ipath_poll_hdrqfull() needs this */
- rmb();
- pollflag = ipath_poll_hdrqfull(pd);
-
- if (pd->port_urgent != pd->port_urgent_poll) {
- pollflag |= POLLIN | POLLRDNORM;
- pd->port_urgent_poll = pd->port_urgent;
- }
-
- if (!pollflag) {
- /* this saves a spin_lock/unlock in interrupt handler... */
- set_bit(IPATH_PORT_WAITING_URG, &pd->port_flag);
- /* flush waiting flag so don't miss an event... */
- wmb();
- poll_wait(fp, &pd->port_wait, pt);
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll_next(struct ipath_portdata *pd,
- struct file *fp,
- struct poll_table_struct *pt)
-{
- u32 head;
- u32 tail;
- unsigned pollflag = 0;
- struct ipath_devdata *dd;
-
- dd = pd->port_dd;
-
- /* variable access in ipath_poll_hdrqfull() needs this */
- rmb();
- pollflag = ipath_poll_hdrqfull(pd);
-
- head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
- if (pd->port_rcvhdrtail_kvaddr)
- tail = ipath_get_rcvhdrtail(pd);
- else
- tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
-
- if (head != tail)
- pollflag |= POLLIN | POLLRDNORM;
- else {
- /* this saves a spin_lock/unlock in interrupt handler */
- set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
- /* flush waiting flag so we don't miss an event */
- wmb();
-
- set_bit(pd->port_port + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- if (dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off | head,
- pd->port_port);
-
- poll_wait(fp, &pd->port_wait, pt);
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll(struct file *fp,
- struct poll_table_struct *pt)
-{
- struct ipath_portdata *pd;
- unsigned pollflag;
-
- pd = port_fp(fp);
- if (!pd)
- pollflag = 0;
- else if (pd->poll_type & IPATH_POLL_TYPE_URGENT)
- pollflag = ipath_poll_urgent(pd, fp, pt);
- else
- pollflag = ipath_poll_next(pd, fp, pt);
-
- return pollflag;
-}
-
-static int ipath_supports_subports(int user_swmajor, int user_swminor)
-{
- /* no subport implementation prior to software version 1.3 */
- return (user_swmajor > 1) || (user_swminor >= 3);
-}
-
-static int ipath_compatible_subports(int user_swmajor, int user_swminor)
-{
- /* this code is written long-hand for clarity */
- if (IPATH_USER_SWMAJOR != user_swmajor) {
- /* no promise of compatibility if major mismatch */
- return 0;
- }
- if (IPATH_USER_SWMAJOR == 1) {
- switch (IPATH_USER_SWMINOR) {
- case 0:
- case 1:
- case 2:
- /* no subport implementation so cannot be compatible */
- return 0;
- case 3:
- /* 3 is only compatible with itself */
- return user_swminor == 3;
- default:
- /* >= 4 are compatible (or are expected to be) */
- return user_swminor >= 4;
- }
- }
- /* make no promises yet for future major versions */
- return 0;
-}
-
-static int init_subports(struct ipath_devdata *dd,
- struct ipath_portdata *pd,
- const struct ipath_user_info *uinfo)
-{
- int ret = 0;
- unsigned num_subports;
- size_t size;
-
- /*
- * If the user is requesting zero subports,
- * skip the subport allocation.
- */
- if (uinfo->spu_subport_cnt <= 0)
- goto bail;
-
- /* Self-consistency check for ipath_compatible_subports() */
- if (ipath_supports_subports(IPATH_USER_SWMAJOR, IPATH_USER_SWMINOR) &&
- !ipath_compatible_subports(IPATH_USER_SWMAJOR,
- IPATH_USER_SWMINOR)) {
- dev_info(&dd->pcidev->dev,
- "Inconsistent ipath_compatible_subports()\n");
- goto bail;
- }
-
- /* Check for subport compatibility */
- if (!ipath_compatible_subports(uinfo->spu_userversion >> 16,
- uinfo->spu_userversion & 0xffff)) {
- dev_info(&dd->pcidev->dev,
- "Mismatched user version (%d.%d) and driver "
- "version (%d.%d) while port sharing. Ensure "
- "that driver and library are from the same "
- "release.\n",
- (int) (uinfo->spu_userversion >> 16),
- (int) (uinfo->spu_userversion & 0xffff),
- IPATH_USER_SWMAJOR,
- IPATH_USER_SWMINOR);
- goto bail;
- }
- if (uinfo->spu_subport_cnt > INFINIPATH_MAX_SUBPORT) {
- ret = -EINVAL;
- goto bail;
- }
-
- num_subports = uinfo->spu_subport_cnt;
- pd->subport_uregbase = vzalloc(PAGE_SIZE * num_subports);
- if (!pd->subport_uregbase) {
- ret = -ENOMEM;
- goto bail;
- }
- /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
- size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE) * num_subports;
- pd->subport_rcvhdr_base = vzalloc(size);
- if (!pd->subport_rcvhdr_base) {
- ret = -ENOMEM;
- goto bail_ureg;
- }
-
- pd->subport_rcvegrbuf = vzalloc(pd->port_rcvegrbuf_chunks *
- pd->port_rcvegrbuf_size *
- num_subports);
- if (!pd->subport_rcvegrbuf) {
- ret = -ENOMEM;
- goto bail_rhdr;
- }
-
- pd->port_subport_cnt = uinfo->spu_subport_cnt;
- pd->port_subport_id = uinfo->spu_subport_id;
- pd->active_slaves = 1;
- set_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
- goto bail;
-
-bail_rhdr:
- vfree(pd->subport_rcvhdr_base);
-bail_ureg:
- vfree(pd->subport_uregbase);
- pd->subport_uregbase = NULL;
-bail:
- return ret;
-}
-
-static int try_alloc_port(struct ipath_devdata *dd, int port,
- struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- struct ipath_portdata *pd;
- int ret;
-
- if (!(pd = dd->ipath_pd[port])) {
- void *ptmp;
-
- pd = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
-
- /*
- * Allocate memory for use in ipath_tid_update() just once
- * at open, not per call. Reduces cost of expected send
- * setup.
- */
- ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
- dd->ipath_rcvtidcnt * sizeof(struct page **),
- GFP_KERNEL);
- if (!pd || !ptmp) {
- ipath_dev_err(dd, "Unable to allocate portdata "
- "memory, failing open\n");
- ret = -ENOMEM;
- kfree(pd);
- kfree(ptmp);
- goto bail;
- }
- dd->ipath_pd[port] = pd;
- dd->ipath_pd[port]->port_port = port;
- dd->ipath_pd[port]->port_dd = dd;
- dd->ipath_pd[port]->port_tid_pg_list = ptmp;
- init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
- }
- if (!pd->port_cnt) {
- pd->userversion = uinfo->spu_userversion;
- init_user_egr_sizes(pd);
- if ((ret = init_subports(dd, pd, uinfo)) != 0)
- goto bail;
- ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
- current->comm, current->pid, dd->ipath_unit,
- port);
- pd->port_cnt = 1;
- port_fp(fp) = pd;
- pd->port_pid = get_pid(task_pid(current));
- strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
- ipath_stats.sps_ports++;
- ret = 0;
- } else
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-static inline int usable(struct ipath_devdata *dd)
-{
- return dd &&
- (dd->ipath_flags & IPATH_PRESENT) &&
- dd->ipath_kregbase &&
- dd->ipath_lid &&
- !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED
- | IPATH_LINKUNK));
-}
-
-static int find_free_port(int unit, struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- struct ipath_devdata *dd = ipath_lookup(unit);
- int ret, i;
-
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
-
- if (!usable(dd)) {
- ret = -ENETDOWN;
- goto bail;
- }
-
- for (i = 1; i < dd->ipath_cfgports; i++) {
- ret = try_alloc_port(dd, i, fp, uinfo);
- if (ret != -EBUSY)
- goto bail;
- }
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-static int find_best_unit(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret = 0, i, prefunit = -1, devmax;
- int maxofallports, npresent, nup;
- int ndev;
-
- devmax = ipath_count_units(&npresent, &nup, &maxofallports);
-
- /*
- * This code is present to allow a knowledgeable person to
- * specify the layout of processes to processors before opening
- * this driver, and then we'll assign the process to the "closest"
- * InfiniPath chip to that processor (we assume reasonable connectivity,
- * for now). This code assumes that if affinity has been set
- * before this point, that at most one cpu is set; for now this
- * is reasonable. I check for both cpumask_empty() and cpumask_full(),
- * in case some kernel variant sets none of the bits when no
- * affinity is set. 2.6.11 and 12 kernels have all present
- * cpus set. Some day we'll have to fix it up further to handle
- * a cpu subset. This algorithm fails for two HT chips connected
- * in tunnel fashion. Eventually this needs real topology
- * information. There may be some issues with dual core numbering
- * as well. This needs more work prior to release.
- */
- if (!cpumask_empty(tsk_cpus_allowed(current)) &&
- !cpumask_full(tsk_cpus_allowed(current))) {
- int ncpus = num_online_cpus(), curcpu = -1, nset = 0;
- get_online_cpus();
- for_each_online_cpu(i)
- if (cpumask_test_cpu(i, tsk_cpus_allowed(current))) {
- ipath_cdbg(PROC, "%s[%u] affinity set for "
- "cpu %d/%d\n", current->comm,
- current->pid, i, ncpus);
- curcpu = i;
- nset++;
- }
- put_online_cpus();
- if (curcpu != -1 && nset != ncpus) {
- if (npresent) {
- prefunit = curcpu / (ncpus / npresent);
- ipath_cdbg(PROC,"%s[%u] %d chips, %d cpus, "
- "%d cpus/chip, select unit %d\n",
- current->comm, current->pid,
- npresent, ncpus, ncpus / npresent,
- prefunit);
- }
- }
- }
-
- /*
- * user ports start at 1, kernel port is 0
- * For now, we do round-robin access across all chips
- */
-
- if (prefunit != -1)
- devmax = prefunit + 1;
-recheck:
- for (i = 1; i < maxofallports; i++) {
- for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
- ndev++) {
- struct ipath_devdata *dd = ipath_lookup(ndev);
-
- if (!usable(dd))
- continue; /* can't use this unit */
- if (i >= dd->ipath_cfgports)
- /*
- * Maxed out on users of this unit. Try
- * next.
- */
- continue;
- ret = try_alloc_port(dd, i, fp, uinfo);
- if (!ret)
- goto done;
- }
- }
-
- if (npresent) {
- if (nup == 0) {
- ret = -ENETDOWN;
- ipath_dbg("No ports available (none initialized "
- "and ready)\n");
- } else {
- if (prefunit > 0) {
- /* if started above 0, retry from 0 */
- ipath_cdbg(PROC,
- "%s[%u] no ports on prefunit "
- "%d, clear and re-check\n",
- current->comm, current->pid,
- prefunit);
- devmax = ipath_count_units(NULL, NULL,
- NULL);
- prefunit = -1;
- goto recheck;
- }
- ret = -EBUSY;
- ipath_dbg("No ports available\n");
- }
- } else {
- ret = -ENXIO;
- ipath_dbg("No boards found\n");
- }
-
-done:
- return ret;
-}
-
-static int find_shared_port(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int devmax, ndev, i;
- int ret = 0;
-
- devmax = ipath_count_units(NULL, NULL, NULL);
-
- for (ndev = 0; ndev < devmax; ndev++) {
- struct ipath_devdata *dd = ipath_lookup(ndev);
-
- if (!usable(dd))
- continue;
- for (i = 1; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- /* Skip ports which are not yet open */
- if (!pd || !pd->port_cnt)
- continue;
- /* Skip port if it doesn't match the requested one */
- if (pd->port_subport_id != uinfo->spu_subport_id)
- continue;
- /* Verify the sharing process matches the master */
- if (pd->port_subport_cnt != uinfo->spu_subport_cnt ||
- pd->userversion != uinfo->spu_userversion ||
- pd->port_cnt >= pd->port_subport_cnt) {
- ret = -EINVAL;
- goto done;
- }
- port_fp(fp) = pd;
- subport_fp(fp) = pd->port_cnt++;
- pd->port_subpid[subport_fp(fp)] =
- get_pid(task_pid(current));
- tidcursor_fp(fp) = 0;
- pd->active_slaves |= 1 << subport_fp(fp);
- ipath_cdbg(PROC,
- "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
- current->comm, current->pid,
- subport_fp(fp),
- pd->port_comm, pid_nr(pd->port_pid),
- dd->ipath_unit, pd->port_port);
- ret = 1;
- goto done;
- }
- }
-
-done:
- return ret;
-}
-
-static int ipath_open(struct inode *in, struct file *fp)
-{
- /* The real work is performed later in ipath_assign_port() */
- fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
- return fp->private_data ? 0 : -ENOMEM;
-}
-
-/* Get port early, so can set affinity prior to memory allocation */
-static int ipath_assign_port(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret;
- int i_minor;
- unsigned swmajor, swminor;
-
- /* Check to be sure we haven't already initialized this file */
- if (port_fp(fp)) {
- ret = -EINVAL;
- goto done;
- }
-
- /* for now, if major version is different, bail */
- swmajor = uinfo->spu_userversion >> 16;
- if (swmajor != IPATH_USER_SWMAJOR) {
- ipath_dbg("User major version %d not same as driver "
- "major %d\n", uinfo->spu_userversion >> 16,
- IPATH_USER_SWMAJOR);
- ret = -ENODEV;
- goto done;
- }
-
- swminor = uinfo->spu_userversion & 0xffff;
- if (swminor != IPATH_USER_SWMINOR)
- ipath_dbg("User minor version %d not same as driver "
- "minor %d\n", swminor, IPATH_USER_SWMINOR);
-
- mutex_lock(&ipath_mutex);
-
- if (ipath_compatible_subports(swmajor, swminor) &&
- uinfo->spu_subport_cnt &&
- (ret = find_shared_port(fp, uinfo))) {
- if (ret > 0)
- ret = 0;
- goto done_chk_sdma;
- }
-
- i_minor = iminor(file_inode(fp)) - IPATH_USER_MINOR_BASE;
- ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)file_inode(fp)->i_rdev, i_minor);
-
- if (i_minor)
- ret = find_free_port(i_minor - 1, fp, uinfo);
- else
- ret = find_best_unit(fp, uinfo);
-
-done_chk_sdma:
- if (!ret) {
- struct ipath_filedata *fd = fp->private_data;
- const struct ipath_portdata *pd = fd->pd;
- const struct ipath_devdata *dd = pd->port_dd;
-
- fd->pq = ipath_user_sdma_queue_create(&dd->pcidev->dev,
- dd->ipath_unit,
- pd->port_port,
- fd->subport);
-
- if (!fd->pq)
- ret = -ENOMEM;
- }
-
- mutex_unlock(&ipath_mutex);
-
-done:
- return ret;
-}
-
-
-static int ipath_do_user_init(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret;
- struct ipath_portdata *pd = port_fp(fp);
- struct ipath_devdata *dd;
- u32 head32;
-
- /* Subports don't need to initialize anything since master did it. */
- if (subport_fp(fp)) {
- ret = wait_event_interruptible(pd->port_wait,
- !test_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag));
- goto done;
- }
-
- dd = pd->port_dd;
-
- if (uinfo->spu_rcvhdrsize) {
- ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
- if (ret)
- goto done;
- }
-
- /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
-
- /* some ports may get extra buffers, calculate that here */
- if (pd->port_port <= dd->ipath_ports_extrabuf)
- pd->port_piocnt = dd->ipath_pbufsport + 1;
- else
- pd->port_piocnt = dd->ipath_pbufsport;
-
- /* for right now, kernel piobufs are at end, so port 1 is at 0 */
- if (pd->port_port <= dd->ipath_ports_extrabuf)
- pd->port_pio_base = (dd->ipath_pbufsport + 1)
- * (pd->port_port - 1);
- else
- pd->port_pio_base = dd->ipath_ports_extrabuf +
- dd->ipath_pbufsport * (pd->port_port - 1);
- pd->port_piobufs = dd->ipath_piobufbase +
- pd->port_pio_base * dd->ipath_palign;
- ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
- " first pio %u\n", pd->port_port, pd->port_piobufs,
- pd->port_piocnt, pd->port_pio_base);
- ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);
-
- /*
- * Now allocate the rcvhdr Q and eager TIDs; skip the TID
- * array for time being. If pd->port_port > chip-supported,
- * we need to do extra stuff here to handle by handling overflow
- * through port 0, someday
- */
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = ipath_create_user_egr(pd);
- if (ret)
- goto done;
-
- /*
- * set the eager head register for this port to the current values
- * of the tail pointers, since we don't know if they were
- * updated on last use of the port.
- */
- head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
- ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
- pd->port_lastrcvhdrqtail = -1;
- ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
- pd->port_port, head32);
- pd->port_tidcursor = 0; /* start at beginning after open */
-
- /* initialize poll variables... */
- pd->port_urgent = 0;
- pd->port_urgent_poll = 0;
- pd->port_hdrqfull_poll = pd->port_hdrqfull;
-
- /*
- * Now enable the port for receive.
- * For chips that are set to DMA the tail register to memory
- * when they change (and when the update bit transitions from
- * 0 to 1. So for those chips, we turn it off and then back on.
- * This will (very briefly) affect any other open ports, but the
- * duration is very short, and therefore isn't an issue. We
- * explicitly set the in-memory tail copy to 0 beforehand, so we
- * don't have to wait to be sure the DMA update has happened
- * (chip resets head/tail to 0 on transition to enable).
- */
- set_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- if (pd->port_rcvhdrtail_kvaddr)
- ipath_clear_rcvhdrtail(pd);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl &
- ~(1ULL << dd->ipath_r_tailupd_shift));
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* Notify any waiting slaves */
- if (pd->port_subport_cnt) {
- clear_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
- wake_up(&pd->port_wait);
- }
-done:
- return ret;
-}
-
-/**
- * unlock_exptid - unlock any expected TID entries port still had in use
- * @pd: port
- *
- * We don't actually update the chip here, because we do a bulk update
- * below, using ipath_f_clear_tids.
- */
-static void unlock_expected_tids(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt;
- int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt;
-
- ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
- pd->port_port);
- for (i = port_tidbase; i < maxtid; i++) {
- struct page *ps = dd->ipath_pageshadow[i];
-
- if (!ps)
- continue;
-
- dd->ipath_pageshadow[i] = NULL;
- pci_unmap_page(dd->pcidev, dd->ipath_physshadow[i],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages_on_close(&ps, 1);
- cnt++;
- ipath_stats.sps_pageunlocks++;
- }
- if (cnt)
- ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n",
- pd->port_port, cnt);
-
- if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks)
- ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n",
- (unsigned long long) ipath_stats.sps_pagelocks,
- (unsigned long long)
- ipath_stats.sps_pageunlocks);
-}
-
-static int ipath_close(struct inode *in, struct file *fp)
-{
- struct ipath_filedata *fd;
- struct ipath_portdata *pd;
- struct ipath_devdata *dd;
- unsigned long flags;
- unsigned port;
- struct pid *pid;
-
- ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n",
- (long)in->i_rdev, fp->private_data);
-
- mutex_lock(&ipath_mutex);
-
- fd = fp->private_data;
- fp->private_data = NULL;
- pd = fd->pd;
- if (!pd) {
- mutex_unlock(&ipath_mutex);
- goto bail;
- }
-
- dd = pd->port_dd;
-
- /* drain user sdma queue */
- ipath_user_sdma_queue_drain(dd, fd->pq);
- ipath_user_sdma_queue_destroy(fd->pq);
-
- if (--pd->port_cnt) {
- /*
- * XXX If the master closes the port before the slave(s),
- * revoke the mmap for the eager receive queue so
- * the slave(s) don't wait for receive data forever.
- */
- pd->active_slaves &= ~(1 << fd->subport);
- put_pid(pd->port_subpid[fd->subport]);
- pd->port_subpid[fd->subport] = NULL;
- mutex_unlock(&ipath_mutex);
- goto bail;
- }
- /* early; no interrupt users after this */
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- port = pd->port_port;
- dd->ipath_pd[port] = NULL;
- pid = pd->port_pid;
- pd->port_pid = NULL;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
-
- if (pd->port_rcvwait_to || pd->port_piowait_to
- || pd->port_rcvnowait || pd->port_pionowait) {
- ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; "
- "%u rcv %u, pio already\n",
- pd->port_port, pd->port_rcvwait_to,
- pd->port_piowait_to, pd->port_rcvnowait,
- pd->port_pionowait);
- pd->port_rcvwait_to = pd->port_piowait_to =
- pd->port_rcvnowait = pd->port_pionowait = 0;
- }
- if (pd->port_flag) {
- ipath_cdbg(PROC, "port %u port_flag set: 0x%lx\n",
- pd->port_port, pd->port_flag);
- pd->port_flag = 0;
- }
-
- if (dd->ipath_kregbase) {
- /* atomically clear receive enable port and intr avail. */
- clear_bit(dd->ipath_r_portenable_shift + port,
- &dd->ipath_rcvctrl);
- clear_bit(pd->port_port + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
- ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* and read back from chip to be sure that nothing
- * else is in flight when we do the rest */
- (void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- /* clean up the pkeys for this port user */
- ipath_clean_part_key(pd, dd);
- /*
- * be paranoid, and never write 0's to these, just use an
- * unused part of the port 0 tail page. Of course,
- * rcvhdraddr points to a large chunk of memory, so this
- * could still trash things, but at least it won't trash
- * page 0, and by disabling the port, it should stop "soon",
- * even if a packet or two is in already in flight after we
- * disabled the port.
- */
- ipath_write_kreg_port(dd,
- dd->ipath_kregs->kr_rcvhdrtailaddr, port,
- dd->ipath_dummy_hdrq_phys);
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
- pd->port_port, dd->ipath_dummy_hdrq_phys);
-
- ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
- ipath_chg_pioavailkernel(dd, pd->port_pio_base,
- pd->port_piocnt, 1);
-
- dd->ipath_f_clear_tids(dd, pd->port_port);
-
- if (dd->ipath_pageshadow)
- unlock_expected_tids(pd);
- ipath_stats.sps_ports--;
- ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
- pd->port_comm, pid_nr(pid),
- dd->ipath_unit, port);
- }
-
- put_pid(pid);
- mutex_unlock(&ipath_mutex);
- ipath_free_pddata(dd, pd); /* after releasing the mutex */
-
-bail:
- kfree(fd);
- return 0;
-}
-
-static int ipath_port_info(struct ipath_portdata *pd, u16 subport,
- struct ipath_port_info __user *uinfo)
-{
- struct ipath_port_info info;
- int nup;
- int ret;
- size_t sz;
-
- (void) ipath_count_units(NULL, &nup, NULL);
- info.num_active = nup;
- info.unit = pd->port_dd->ipath_unit;
- info.port = pd->port_port;
- info.subport = subport;
- /* Don't return new fields if old library opened the port. */
- if (ipath_supports_subports(pd->userversion >> 16,
- pd->userversion & 0xffff)) {
- /* Number of user ports available for this device. */
- info.num_ports = pd->port_dd->ipath_cfgports - 1;
- info.num_subports = pd->port_subport_cnt;
- sz = sizeof(info);
- } else
- sz = sizeof(info) - 2 * sizeof(u16);
-
- if (copy_to_user(uinfo, &info, sz)) {
- ret = -EFAULT;
- goto bail;
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_get_slave_info(struct ipath_portdata *pd,
- void __user *slave_mask_addr)
-{
- int ret = 0;
-
- if (copy_to_user(slave_mask_addr, &pd->active_slaves, sizeof(u32)))
- ret = -EFAULT;
- return ret;
-}
-
-static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue *pq,
- u32 __user *inflightp)
-{
- const u32 val = ipath_user_sdma_inflight_counter(pq);
-
- if (put_user(val, inflightp))
- return -EFAULT;
-
- return 0;
-}
-
-static int ipath_sdma_get_complete(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- u32 __user *completep)
-{
- u32 val;
- int err;
-
- err = ipath_user_sdma_make_progress(dd, pq);
- if (err < 0)
- return err;
-
- val = ipath_user_sdma_complete_counter(pq);
- if (put_user(val, completep))
- return -EFAULT;
-
- return 0;
-}
-
-static ssize_t ipath_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off)
-{
- const struct ipath_cmd __user *ucmd;
- struct ipath_portdata *pd;
- const void __user *src;
- size_t consumed, copy;
- struct ipath_cmd cmd;
- ssize_t ret = 0;
- void *dest;
-
- if (count < sizeof(cmd.type)) {
- ret = -EINVAL;
- goto bail;
- }
-
- ucmd = (const struct ipath_cmd __user *) data;
-
- if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) {
- ret = -EFAULT;
- goto bail;
- }
-
- consumed = sizeof(cmd.type);
-
- switch (cmd.type) {
- case IPATH_CMD_ASSIGN_PORT:
- case __IPATH_CMD_USER_INIT:
- case IPATH_CMD_USER_INIT:
- copy = sizeof(cmd.cmd.user_info);
- dest = &cmd.cmd.user_info;
- src = &ucmd->cmd.user_info;
- break;
- case IPATH_CMD_RECV_CTRL:
- copy = sizeof(cmd.cmd.recv_ctrl);
- dest = &cmd.cmd.recv_ctrl;
- src = &ucmd->cmd.recv_ctrl;
- break;
- case IPATH_CMD_PORT_INFO:
- copy = sizeof(cmd.cmd.port_info);
- dest = &cmd.cmd.port_info;
- src = &ucmd->cmd.port_info;
- break;
- case IPATH_CMD_TID_UPDATE:
- case IPATH_CMD_TID_FREE:
- copy = sizeof(cmd.cmd.tid_info);
- dest = &cmd.cmd.tid_info;
- src = &ucmd->cmd.tid_info;
- break;
- case IPATH_CMD_SET_PART_KEY:
- copy = sizeof(cmd.cmd.part_key);
- dest = &cmd.cmd.part_key;
- src = &ucmd->cmd.part_key;
- break;
- case __IPATH_CMD_SLAVE_INFO:
- copy = sizeof(cmd.cmd.slave_mask_addr);
- dest = &cmd.cmd.slave_mask_addr;
- src = &ucmd->cmd.slave_mask_addr;
- break;
- case IPATH_CMD_PIOAVAILUPD: // force an update of PIOAvail reg
- copy = 0;
- src = NULL;
- dest = NULL;
- break;
- case IPATH_CMD_POLL_TYPE:
- copy = sizeof(cmd.cmd.poll_type);
- dest = &cmd.cmd.poll_type;
- src = &ucmd->cmd.poll_type;
- break;
- case IPATH_CMD_ARMLAUNCH_CTRL:
- copy = sizeof(cmd.cmd.armlaunch_ctrl);
- dest = &cmd.cmd.armlaunch_ctrl;
- src = &ucmd->cmd.armlaunch_ctrl;
- break;
- case IPATH_CMD_SDMA_INFLIGHT:
- copy = sizeof(cmd.cmd.sdma_inflight);
- dest = &cmd.cmd.sdma_inflight;
- src = &ucmd->cmd.sdma_inflight;
- break;
- case IPATH_CMD_SDMA_COMPLETE:
- copy = sizeof(cmd.cmd.sdma_complete);
- dest = &cmd.cmd.sdma_complete;
- src = &ucmd->cmd.sdma_complete;
- break;
- default:
- ret = -EINVAL;
- goto bail;
- }
-
- if (copy) {
- if ((count - consumed) < copy) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (copy_from_user(dest, src, copy)) {
- ret = -EFAULT;
- goto bail;
- }
-
- consumed += copy;
- }
-
- pd = port_fp(fp);
- if (!pd && cmd.type != __IPATH_CMD_USER_INIT &&
- cmd.type != IPATH_CMD_ASSIGN_PORT) {
- ret = -EINVAL;
- goto bail;
- }
-
- switch (cmd.type) {
- case IPATH_CMD_ASSIGN_PORT:
- ret = ipath_assign_port(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- break;
- case __IPATH_CMD_USER_INIT:
- /* backwards compatibility, get port first */
- ret = ipath_assign_port(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- /* and fall through to current version. */
- case IPATH_CMD_USER_INIT:
- ret = ipath_do_user_init(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- ret = ipath_get_base_info(
- fp, (void __user *) (unsigned long)
- cmd.cmd.user_info.spu_base_info,
- cmd.cmd.user_info.spu_base_info_size);
- break;
- case IPATH_CMD_RECV_CTRL:
- ret = ipath_manage_rcvq(pd, subport_fp(fp), cmd.cmd.recv_ctrl);
- break;
- case IPATH_CMD_PORT_INFO:
- ret = ipath_port_info(pd, subport_fp(fp),
- (struct ipath_port_info __user *)
- (unsigned long) cmd.cmd.port_info);
- break;
- case IPATH_CMD_TID_UPDATE:
- ret = ipath_tid_update(pd, fp, &cmd.cmd.tid_info);
- break;
- case IPATH_CMD_TID_FREE:
- ret = ipath_tid_free(pd, subport_fp(fp), &cmd.cmd.tid_info);
- break;
- case IPATH_CMD_SET_PART_KEY:
- ret = ipath_set_part_key(pd, cmd.cmd.part_key);
- break;
- case __IPATH_CMD_SLAVE_INFO:
- ret = ipath_get_slave_info(pd,
- (void __user *) (unsigned long)
- cmd.cmd.slave_mask_addr);
- break;
- case IPATH_CMD_PIOAVAILUPD:
- ipath_force_pio_avail_update(pd->port_dd);
- break;
- case IPATH_CMD_POLL_TYPE:
- pd->poll_type = cmd.cmd.poll_type;
- break;
- case IPATH_CMD_ARMLAUNCH_CTRL:
- if (cmd.cmd.armlaunch_ctrl)
- ipath_enable_armlaunch(pd->port_dd);
- else
- ipath_disable_armlaunch(pd->port_dd);
- break;
- case IPATH_CMD_SDMA_INFLIGHT:
- ret = ipath_sdma_get_inflight(user_sdma_queue_fp(fp),
- (u32 __user *) (unsigned long)
- cmd.cmd.sdma_inflight);
- break;
- case IPATH_CMD_SDMA_COMPLETE:
- ret = ipath_sdma_get_complete(pd->port_dd,
- user_sdma_queue_fp(fp),
- (u32 __user *) (unsigned long)
- cmd.cmd.sdma_complete);
- break;
- }
-
- if (ret >= 0)
- ret = consumed;
-
-bail:
- return ret;
-}
-
-static ssize_t ipath_write_iter(struct kiocb *iocb, struct iov_iter *from)
-{
- struct file *filp = iocb->ki_filp;
- struct ipath_filedata *fp = filp->private_data;
- struct ipath_portdata *pd = port_fp(filp);
- struct ipath_user_sdma_queue *pq = fp->pq;
-
- if (!iter_is_iovec(from) || !from->nr_segs)
- return -EINVAL;
-
- return ipath_user_sdma_writev(pd->port_dd, pq, from->iov, from->nr_segs);
-}
-
-static struct class *ipath_class;
-
-static int init_cdev(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp)
-{
- const dev_t dev = MKDEV(IPATH_MAJOR, minor);
- struct cdev *cdev = NULL;
- struct device *device = NULL;
- int ret;
-
- cdev = cdev_alloc();
- if (!cdev) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate cdev for minor %d, %s\n",
- minor, name);
- ret = -ENOMEM;
- goto done;
- }
-
- cdev->owner = THIS_MODULE;
- cdev->ops = fops;
- kobject_set_name(&cdev->kobj, name);
-
- ret = cdev_add(cdev, dev, 1);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not add cdev for minor %d, %s (err %d)\n",
- minor, name, -ret);
- goto err_cdev;
- }
-
- device = device_create(ipath_class, NULL, dev, NULL, name);
-
- if (IS_ERR(device)) {
- ret = PTR_ERR(device);
- printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
- "device for minor %d, %s (err %d)\n",
- minor, name, -ret);
- goto err_cdev;
- }
-
- goto done;
-
-err_cdev:
- cdev_del(cdev);
- cdev = NULL;
-
-done:
- if (ret >= 0) {
- *cdevp = cdev;
- *devp = device;
- } else {
- *cdevp = NULL;
- *devp = NULL;
- }
-
- return ret;
-}
-
-int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp)
-{
- return init_cdev(minor, name, fops, cdevp, devp);
-}
-
-static void cleanup_cdev(struct cdev **cdevp,
- struct device **devp)
-{
- struct device *dev = *devp;
-
- if (dev) {
- device_unregister(dev);
- *devp = NULL;
- }
-
- if (*cdevp) {
- cdev_del(*cdevp);
- *cdevp = NULL;
- }
-}
-
-void ipath_cdev_cleanup(struct cdev **cdevp,
- struct device **devp)
-{
- cleanup_cdev(cdevp, devp);
-}
-
-static struct cdev *wildcard_cdev;
-static struct device *wildcard_dev;
-
-static const dev_t dev = MKDEV(IPATH_MAJOR, 0);
-
-static int user_init(void)
-{
- int ret;
-
- ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME ": Could not register "
- "chrdev region (err %d)\n", -ret);
- goto done;
- }
-
- ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME);
-
- if (IS_ERR(ipath_class)) {
- ret = PTR_ERR(ipath_class);
- printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
- "device class (err %d)\n", -ret);
- goto bail;
- }
-
- goto done;
-bail:
- unregister_chrdev_region(dev, IPATH_NMINORS);
-done:
- return ret;
-}
-
-static void user_cleanup(void)
-{
- if (ipath_class) {
- class_destroy(ipath_class);
- ipath_class = NULL;
- }
-
- unregister_chrdev_region(dev, IPATH_NMINORS);
-}
-
-static atomic_t user_count = ATOMIC_INIT(0);
-static atomic_t user_setup = ATOMIC_INIT(0);
-
-int ipath_user_add(struct ipath_devdata *dd)
-{
- char name[10];
- int ret;
-
- if (atomic_inc_return(&user_count) == 1) {
- ret = user_init();
- if (ret < 0) {
- ipath_dev_err(dd, "Unable to set up user support: "
- "error %d\n", -ret);
- goto bail;
- }
- ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
- &wildcard_dev);
- if (ret < 0) {
- ipath_dev_err(dd, "Could not create wildcard "
- "minor: error %d\n", -ret);
- goto bail_user;
- }
-
- atomic_set(&user_setup, 1);
- }
-
- snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
-
- ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
- &dd->user_cdev, &dd->user_dev);
- if (ret < 0)
- ipath_dev_err(dd, "Could not create user minor %d, %s\n",
- dd->ipath_unit + 1, name);
-
- goto bail;
-
-bail_user:
- user_cleanup();
-bail:
- return ret;
-}
-
-void ipath_user_remove(struct ipath_devdata *dd)
-{
- cleanup_cdev(&dd->user_cdev, &dd->user_dev);
-
- if (atomic_dec_return(&user_count) == 0) {
- if (atomic_read(&user_setup) == 0)
- goto bail;
-
- cleanup_cdev(&wildcard_cdev, &wildcard_dev);
- user_cleanup();
-
- atomic_set(&user_setup, 0);
- }
-bail:
- return;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_fs.c b/drivers/staging/rdma/ipath/ipath_fs.c
deleted file mode 100644
index 476fcdf..0000000
--- a/drivers/staging/rdma/ipath/ipath_fs.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/namei.h>
-#include <linux/slab.h>
-
-#include "ipath_kernel.h"
-
-#define IPATHFS_MAGIC 0x726a77
-
-static struct super_block *ipath_super;
-
-static int ipathfs_mknod(struct inode *dir, struct dentry *dentry,
- umode_t mode, const struct file_operations *fops,
- void *data)
-{
- int error;
- struct inode *inode = new_inode(dir->i_sb);
-
- if (!inode) {
- error = -EPERM;
- goto bail;
- }
-
- inode->i_ino = get_next_ino();
- inode->i_mode = mode;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_private = data;
- if (S_ISDIR(mode)) {
- inode->i_op = &simple_dir_inode_operations;
- inc_nlink(inode);
- inc_nlink(dir);
- }
-
- inode->i_fop = fops;
-
- d_instantiate(dentry, inode);
- error = 0;
-
-bail:
- return error;
-}
-
-static int create_file(const char *name, umode_t mode,
- struct dentry *parent, struct dentry **dentry,
- const struct file_operations *fops, void *data)
-{
- int error;
-
- inode_lock(d_inode(parent));
- *dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(*dentry))
- error = ipathfs_mknod(d_inode(parent), *dentry,
- mode, fops, data);
- else
- error = PTR_ERR(*dentry);
- inode_unlock(d_inode(parent));
-
- return error;
-}
-
-static ssize_t atomic_stats_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- return simple_read_from_buffer(buf, count, ppos, &ipath_stats,
- sizeof ipath_stats);
-}
-
-static const struct file_operations atomic_stats_ops = {
- .read = atomic_stats_read,
- .llseek = default_llseek,
-};
-
-static ssize_t atomic_counters_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct infinipath_counters counters;
- struct ipath_devdata *dd;
-
- dd = file_inode(file)->i_private;
- dd->ipath_f_read_counters(dd, &counters);
-
- return simple_read_from_buffer(buf, count, ppos, &counters,
- sizeof counters);
-}
-
-static const struct file_operations atomic_counters_ops = {
- .read = atomic_counters_read,
- .llseek = default_llseek,
-};
-
-static ssize_t flash_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ipath_devdata *dd;
- ssize_t ret;
- loff_t pos;
- char *tmp;
-
- pos = *ppos;
-
- if ( pos < 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (pos >= sizeof(struct ipath_flash)) {
- ret = 0;
- goto bail;
- }
-
- if (count > sizeof(struct ipath_flash) - pos)
- count = sizeof(struct ipath_flash) - pos;
-
- tmp = kmalloc(count, GFP_KERNEL);
- if (!tmp) {
- ret = -ENOMEM;
- goto bail;
- }
-
- dd = file_inode(file)->i_private;
- if (ipath_eeprom_read(dd, pos, tmp, count)) {
- ipath_dev_err(dd, "failed to read from flash\n");
- ret = -ENXIO;
- goto bail_tmp;
- }
-
- if (copy_to_user(buf, tmp, count)) {
- ret = -EFAULT;
- goto bail_tmp;
- }
-
- *ppos = pos + count;
- ret = count;
-
-bail_tmp:
- kfree(tmp);
-
-bail:
- return ret;
-}
-
-static ssize_t flash_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ipath_devdata *dd;
- ssize_t ret;
- loff_t pos;
- char *tmp;
-
- pos = *ppos;
-
- if (pos != 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (count != sizeof(struct ipath_flash)) {
- ret = -EINVAL;
- goto bail;
- }
-
- tmp = memdup_user(buf, count);
- if (IS_ERR(tmp))
- return PTR_ERR(tmp);
-
- dd = file_inode(file)->i_private;
- if (ipath_eeprom_write(dd, pos, tmp, count)) {
- ret = -ENXIO;
- ipath_dev_err(dd, "failed to write to flash\n");
- goto bail_tmp;
- }
-
- *ppos = pos + count;
- ret = count;
-
-bail_tmp:
- kfree(tmp);
-
-bail:
- return ret;
-}
-
-static const struct file_operations flash_ops = {
- .read = flash_read,
- .write = flash_write,
- .llseek = default_llseek,
-};
-
-static int create_device_files(struct super_block *sb,
- struct ipath_devdata *dd)
-{
- struct dentry *dir, *tmp;
- char unit[10];
- int ret;
-
- snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
- ret = create_file(unit, S_IFDIR|S_IRUGO|S_IXUGO, sb->s_root, &dir,
- &simple_dir_operations, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s) failed: %d\n", unit, ret);
- goto bail;
- }
-
- ret = create_file("atomic_counters", S_IFREG|S_IRUGO, dir, &tmp,
- &atomic_counters_ops, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s/atomic_counters) "
- "failed: %d\n", unit, ret);
- goto bail;
- }
-
- ret = create_file("flash", S_IFREG|S_IWUSR|S_IRUGO, dir, &tmp,
- &flash_ops, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s/flash) "
- "failed: %d\n", unit, ret);
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-static int remove_file(struct dentry *parent, char *name)
-{
- struct dentry *tmp;
- int ret;
-
- tmp = lookup_one_len(name, parent, strlen(name));
-
- if (IS_ERR(tmp)) {
- ret = PTR_ERR(tmp);
- goto bail;
- }
-
- spin_lock(&tmp->d_lock);
- if (simple_positive(tmp)) {
- dget_dlock(tmp);
- __d_drop(tmp);
- spin_unlock(&tmp->d_lock);
- simple_unlink(d_inode(parent), tmp);
- } else
- spin_unlock(&tmp->d_lock);
-
- ret = 0;
-bail:
- /*
- * We don't expect clients to care about the return value, but
- * it's there if they need it.
- */
- return ret;
-}
-
-static int remove_device_files(struct super_block *sb,
- struct ipath_devdata *dd)
-{
- struct dentry *dir, *root;
- char unit[10];
- int ret;
-
- root = dget(sb->s_root);
- inode_lock(d_inode(root));
- snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
- dir = lookup_one_len(unit, root, strlen(unit));
-
- if (IS_ERR(dir)) {
- ret = PTR_ERR(dir);
- printk(KERN_ERR "Lookup of %s failed\n", unit);
- goto bail;
- }
-
- remove_file(dir, "flash");
- remove_file(dir, "atomic_counters");
- d_delete(dir);
- ret = simple_rmdir(d_inode(root), dir);
-
-bail:
- inode_unlock(d_inode(root));
- dput(root);
- return ret;
-}
-
-static int ipathfs_fill_super(struct super_block *sb, void *data,
- int silent)
-{
- struct ipath_devdata *dd, *tmp;
- unsigned long flags;
- int ret;
-
- static struct tree_descr files[] = {
- [2] = {"atomic_stats", &atomic_stats_ops, S_IRUGO},
- {""},
- };
-
- ret = simple_fill_super(sb, IPATHFS_MAGIC, files);
- if (ret) {
- printk(KERN_ERR "simple_fill_super failed: %d\n", ret);
- goto bail;
- }
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- ret = create_device_files(sb, dd);
- if (ret)
- goto bail;
- spin_lock_irqsave(&ipath_devs_lock, flags);
- }
-
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
-bail:
- return ret;
-}
-
-static struct dentry *ipathfs_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- struct dentry *ret;
- ret = mount_single(fs_type, flags, data, ipathfs_fill_super);
- if (!IS_ERR(ret))
- ipath_super = ret->d_sb;
- return ret;
-}
-
-static void ipathfs_kill_super(struct super_block *s)
-{
- kill_litter_super(s);
- ipath_super = NULL;
-}
-
-int ipathfs_add_device(struct ipath_devdata *dd)
-{
- int ret;
-
- if (ipath_super == NULL) {
- ret = 0;
- goto bail;
- }
-
- ret = create_device_files(ipath_super, dd);
-
-bail:
- return ret;
-}
-
-int ipathfs_remove_device(struct ipath_devdata *dd)
-{
- int ret;
-
- if (ipath_super == NULL) {
- ret = 0;
- goto bail;
- }
-
- ret = remove_device_files(ipath_super, dd);
-
-bail:
- return ret;
-}
-
-static struct file_system_type ipathfs_fs_type = {
- .owner = THIS_MODULE,
- .name = "ipathfs",
- .mount = ipathfs_mount,
- .kill_sb = ipathfs_kill_super,
-};
-MODULE_ALIAS_FS("ipathfs");
-
-int __init ipath_init_ipathfs(void)
-{
- return register_filesystem(&ipathfs_fs_type);
-}
-
-void __exit ipath_exit_ipathfs(void)
-{
- unregister_filesystem(&ipathfs_fs_type);
-}
diff --git a/drivers/staging/rdma/ipath/ipath_iba6110.c b/drivers/staging/rdma/ipath/ipath_iba6110.c
deleted file mode 100644
index 5f13572..0000000
--- a/drivers/staging/rdma/ipath/ipath_iba6110.c
+++ /dev/null
@@ -1,1939 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains all of the code that is specific to the InfiniPath
- * HT chip.
- */
-
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/htirq.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-
-static void ipath_setup_ht_setextled(struct ipath_devdata *, u64, u64);
-
-
-/*
- * This lists the InfiniPath registers, in the actual chip layout.
- * This structure should never be directly accessed.
- *
- * The names are in InterCap form because they're taken straight from
- * the chip specification. Since they're only used in this file, they
- * don't pollute the rest of the source.
-*/
-
-struct _infinipath_do_not_use_kernel_regs {
- unsigned long long Revision;
- unsigned long long Control;
- unsigned long long PageAlign;
- unsigned long long PortCnt;
- unsigned long long DebugPortSelect;
- unsigned long long DebugPort;
- unsigned long long SendRegBase;
- unsigned long long UserRegBase;
- unsigned long long CounterRegBase;
- unsigned long long Scratch;
- unsigned long long ReservedMisc1;
- unsigned long long InterruptConfig;
- unsigned long long IntBlocked;
- unsigned long long IntMask;
- unsigned long long IntStatus;
- unsigned long long IntClear;
- unsigned long long ErrorMask;
- unsigned long long ErrorStatus;
- unsigned long long ErrorClear;
- unsigned long long HwErrMask;
- unsigned long long HwErrStatus;
- unsigned long long HwErrClear;
- unsigned long long HwDiagCtrl;
- unsigned long long MDIO;
- unsigned long long IBCStatus;
- unsigned long long IBCCtrl;
- unsigned long long ExtStatus;
- unsigned long long ExtCtrl;
- unsigned long long GPIOOut;
- unsigned long long GPIOMask;
- unsigned long long GPIOStatus;
- unsigned long long GPIOClear;
- unsigned long long RcvCtrl;
- unsigned long long RcvBTHQP;
- unsigned long long RcvHdrSize;
- unsigned long long RcvHdrCnt;
- unsigned long long RcvHdrEntSize;
- unsigned long long RcvTIDBase;
- unsigned long long RcvTIDCnt;
- unsigned long long RcvEgrBase;
- unsigned long long RcvEgrCnt;
- unsigned long long RcvBufBase;
- unsigned long long RcvBufSize;
- unsigned long long RxIntMemBase;
- unsigned long long RxIntMemSize;
- unsigned long long RcvPartitionKey;
- unsigned long long ReservedRcv[10];
- unsigned long long SendCtrl;
- unsigned long long SendPIOBufBase;
- unsigned long long SendPIOSize;
- unsigned long long SendPIOBufCnt;
- unsigned long long SendPIOAvailAddr;
- unsigned long long TxIntMemBase;
- unsigned long long TxIntMemSize;
- unsigned long long ReservedSend[9];
- unsigned long long SendBufferError;
- unsigned long long SendBufferErrorCONT1;
- unsigned long long SendBufferErrorCONT2;
- unsigned long long SendBufferErrorCONT3;
- unsigned long long ReservedSBE[4];
- unsigned long long RcvHdrAddr0;
- unsigned long long RcvHdrAddr1;
- unsigned long long RcvHdrAddr2;
- unsigned long long RcvHdrAddr3;
- unsigned long long RcvHdrAddr4;
- unsigned long long RcvHdrAddr5;
- unsigned long long RcvHdrAddr6;
- unsigned long long RcvHdrAddr7;
- unsigned long long RcvHdrAddr8;
- unsigned long long ReservedRHA[7];
- unsigned long long RcvHdrTailAddr0;
- unsigned long long RcvHdrTailAddr1;
- unsigned long long RcvHdrTailAddr2;
- unsigned long long RcvHdrTailAddr3;
- unsigned long long RcvHdrTailAddr4;
- unsigned long long RcvHdrTailAddr5;
- unsigned long long RcvHdrTailAddr6;
- unsigned long long RcvHdrTailAddr7;
- unsigned long long RcvHdrTailAddr8;
- unsigned long long ReservedRHTA[7];
- unsigned long long Sync; /* Software only */
- unsigned long long Dump; /* Software only */
- unsigned long long SimVer; /* Software only */
- unsigned long long ReservedSW[5];
- unsigned long long SerdesConfig0;
- unsigned long long SerdesConfig1;
- unsigned long long SerdesStatus;
- unsigned long long XGXSConfig;
- unsigned long long ReservedSW2[4];
-};
-
-struct _infinipath_do_not_use_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 Reserved1;
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 Reserved6;
- __u64 Reserved7;
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
-};
-
-#define IPATH_KREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
-#define IPATH_CREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_counters, field) / sizeof(u64))
-
-static const struct ipath_kregs ipath_ht_kregs = {
- .kr_control = IPATH_KREG_OFFSET(Control),
- .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
- .kr_debugport = IPATH_KREG_OFFSET(DebugPort),
- .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
- .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
- .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
- .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
- .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
- .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
- .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
- .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
- .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
- .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
- .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
- .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
- .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
- .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
- .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
- .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
- .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
- .kr_intclear = IPATH_KREG_OFFSET(IntClear),
- .kr_interruptconfig = IPATH_KREG_OFFSET(InterruptConfig),
- .kr_intmask = IPATH_KREG_OFFSET(IntMask),
- .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
- .kr_mdio = IPATH_KREG_OFFSET(MDIO),
- .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
- .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
- .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
- .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
- .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
- .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
- .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
- .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
- .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
- .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
- .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
- .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
- .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
- .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
- .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
- .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
- .kr_revision = IPATH_KREG_OFFSET(Revision),
- .kr_scratch = IPATH_KREG_OFFSET(Scratch),
- .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
- .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
- .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
- .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
- .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
- .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
- .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
- .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
- .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
- .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
- .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
- .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
- .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
- .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
- /*
- * These should not be used directly via ipath_write_kreg64(),
- * use them with ipath_write_kreg64_port(),
- */
- .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
- .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0)
-};
-
-static const struct ipath_cregs ipath_ht_cregs = {
- .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
- .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
- .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
- .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
- .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
- .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
- .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
- .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
- .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
- .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
- .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
- .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
- /* calc from Reg_CounterRegBase + offset */
- .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
- .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
- .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
- .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
- .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
- .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
- .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
- .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
- .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
- .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
- .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
- .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
- .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
- .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
- .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
- .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
- .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
- .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
- .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
- .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
- .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
-};
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_MASK ((1U<<9)-1)
-#define INFINIPATH_I_RCVURG_SHIFT 0
-#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<9)-1)
-#define INFINIPATH_I_RCVAVAIL_SHIFT 12
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
-#define INFINIPATH_HWE_HTCMEMPARITYERR_MASK 0x3FFFFFULL
-#define INFINIPATH_HWE_HTCLNKABYTE0CRCERR 0x0000000000800000ULL
-#define INFINIPATH_HWE_HTCLNKABYTE1CRCERR 0x0000000001000000ULL
-#define INFINIPATH_HWE_HTCLNKBBYTE0CRCERR 0x0000000002000000ULL
-#define INFINIPATH_HWE_HTCLNKBBYTE1CRCERR 0x0000000004000000ULL
-#define INFINIPATH_HWE_HTCMISCERR4 0x0000000008000000ULL
-#define INFINIPATH_HWE_HTCMISCERR5 0x0000000010000000ULL
-#define INFINIPATH_HWE_HTCMISCERR6 0x0000000020000000ULL
-#define INFINIPATH_HWE_HTCMISCERR7 0x0000000040000000ULL
-#define INFINIPATH_HWE_HTCBUSTREQPARITYERR 0x0000000080000000ULL
-#define INFINIPATH_HWE_HTCBUSTRESPPARITYERR 0x0000000100000000ULL
-#define INFINIPATH_HWE_HTCBUSIREQPARITYERR 0x0000000200000000ULL
-#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
-#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
-#define INFINIPATH_HWE_HTBPLL_FBSLIP 0x0200000000000000ULL
-#define INFINIPATH_HWE_HTBPLL_RFSLIP 0x0400000000000000ULL
-#define INFINIPATH_HWE_HTAPLL_FBSLIP 0x0800000000000000ULL
-#define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL
-#define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL
-
-#define IBA6110_IBCS_LINKTRAININGSTATE_MASK 0xf
-#define IBA6110_IBCS_LINKSTATE_SHIFT 4
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_FREQSEL 0x2
-#define INFINIPATH_EXTS_SERDESSEL 0x4
-#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
-#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000
-
-
-/* TID entries (memory), HT-only */
-#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
-#define INFINIPATH_RT_VALID 0x8000000000000000ULL
-#define INFINIPATH_RT_ADDR_SHIFT 0
-#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFFULL
-#define INFINIPATH_RT_BUFSIZE_SHIFT 48
-
-#define INFINIPATH_R_INTRAVAIL_SHIFT 16
-#define INFINIPATH_R_TAILUPD_SHIFT 31
-
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET 0x7ULL
-
-/*
- * masks and bits that are different in different chips, or present only
- * in one
- */
-static const ipath_err_t infinipath_hwe_htcmemparityerr_mask =
- INFINIPATH_HWE_HTCMEMPARITYERR_MASK;
-static const ipath_err_t infinipath_hwe_htcmemparityerr_shift =
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT;
-
-static const ipath_err_t infinipath_hwe_htclnkabyte0crcerr =
- INFINIPATH_HWE_HTCLNKABYTE0CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkabyte1crcerr =
- INFINIPATH_HWE_HTCLNKABYTE1CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkbbyte0crcerr =
- INFINIPATH_HWE_HTCLNKBBYTE0CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
- INFINIPATH_HWE_HTCLNKBBYTE1CRCERR;
-
-#define _IPATH_GPIO_SDA_NUM 1
-#define _IPATH_GPIO_SCL_NUM 0
-
-#define IPATH_GPIO_SDA \
- (1ULL << (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-#define IPATH_GPIO_SCL \
- (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-
-/* keep the code below somewhat more readable; not used elsewhere */
-#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
- infinipath_hwe_htclnkabyte1crcerr)
-#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
- infinipath_hwe_htclnkbbyte1crcerr)
-#define _IPATH_HTLANE0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
- infinipath_hwe_htclnkbbyte0crcerr)
-#define _IPATH_HTLANE1_CRCBITS (infinipath_hwe_htclnkabyte1crcerr | \
- infinipath_hwe_htclnkbbyte1crcerr)
-
-static void hwerr_crcbits(struct ipath_devdata *dd, ipath_err_t hwerrs,
- char *msg, size_t msgl)
-{
- char bitsmsg[64];
- ipath_err_t crcbits = hwerrs &
- (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS);
- /* don't check if 8bit HT */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
- crcbits &= ~infinipath_hwe_htclnkabyte1crcerr;
- /* don't check if 8bit HT */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
- crcbits &= ~infinipath_hwe_htclnkbbyte1crcerr;
- /*
- * we'll want to ignore link errors on link that is
- * not in use, if any. For now, complain about both
- */
- if (crcbits) {
- u16 ctrl0, ctrl1;
- snprintf(bitsmsg, sizeof bitsmsg,
- "[HT%s lane %s CRC (%llx); powercycle to completely clear]",
- !(crcbits & _IPATH_HTLINK1_CRCBITS) ?
- "0 (A)" : (!(crcbits & _IPATH_HTLINK0_CRCBITS)
- ? "1 (B)" : "0+1 (A+B)"),
- !(crcbits & _IPATH_HTLANE1_CRCBITS) ? "0"
- : (!(crcbits & _IPATH_HTLANE0_CRCBITS) ? "1" :
- "0+1"), (unsigned long long) crcbits);
- strlcat(msg, bitsmsg, msgl);
-
- /*
- * print extra info for debugging. slave/primary
- * config word 4, 8 (link control 0, 1)
- */
-
- if (pci_read_config_word(dd->pcidev,
- dd->ipath_ht_slave_off + 0x4,
- &ctrl0))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkctrl0 of slave/primary "
- "config block\n");
- else if (!(ctrl0 & 1 << 6))
- /* not if EOC bit set */
- ipath_dbg("HT linkctrl0 0x%x%s%s\n", ctrl0,
- ((ctrl0 >> 8) & 7) ? " CRC" : "",
- ((ctrl0 >> 4) & 1) ? "linkfail" :
- "");
- if (pci_read_config_word(dd->pcidev,
- dd->ipath_ht_slave_off + 0x8,
- &ctrl1))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkctrl1 of slave/primary "
- "config block\n");
- else if (!(ctrl1 & 1 << 6))
- /* not if EOC bit set */
- ipath_dbg("HT linkctrl1 0x%x%s%s\n", ctrl1,
- ((ctrl1 >> 8) & 7) ? " CRC" : "",
- ((ctrl1 >> 4) & 1) ? "linkfail" :
- "");
-
- /* disable until driver reloaded */
- dd->ipath_hwerrmask &= ~crcbits;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- ipath_dbg("HT crc errs: %s\n", msg);
- } else
- ipath_dbg("ignoring HT crc errors 0x%llx, "
- "not in use\n", (unsigned long long)
- (hwerrs & (_IPATH_HTLINK0_CRCBITS |
- _IPATH_HTLINK1_CRCBITS)));
-}
-
-/* 6110 specific hardware errors... */
-static const struct ipath_hwerror_msgs ipath_6110_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(HTCBUSIREQPARITYERR, "HTC Ireq Parity"),
- INFINIPATH_HWE_MSG(HTCBUSTREQPARITYERR, "HTC Treq Parity"),
- INFINIPATH_HWE_MSG(HTCBUSTRESPPARITYERR, "HTC Tresp Parity"),
- INFINIPATH_HWE_MSG(HTCMISCERR5, "HT core Misc5"),
- INFINIPATH_HWE_MSG(HTCMISCERR6, "HT core Misc6"),
- INFINIPATH_HWE_MSG(HTCMISCERR7, "HT core Misc7"),
- INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
- INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
-};
-
-#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
-#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
- << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
-
-static void ipath_ht_txe_recover(struct ipath_devdata *dd)
-{
- ++ipath_stats.sps_txeparity;
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
-}
-
-
-/**
- * ipath_ht_handle_hwerrors - display hardware errors.
- * @dd: the infinipath device
- * @msg: the output buffer
- * @msgl: the size of the output buffer
- *
- * Use same msg buffer as regular errors to avoid excessive stack
- * use. Most hardware errors are catastrophic, but for right now,
- * we'll print them and continue. We reuse the same message buffer as
- * ipath_handle_errors() to avoid excessive stack usage.
- */
-static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
- size_t msgl)
-{
- ipath_err_t hwerrs;
- u32 bits, ctrl;
- int isfatal = 0;
- char bitsmsg[64];
- int log_idx;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
-
- if (!hwerrs) {
- ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
- /*
- * better than printing cofusing messages
- * This seems to be related to clearing the crc error, or
- * the pll error during init.
- */
- goto bail;
- } else if (hwerrs == -1LL) {
- ipath_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
- goto bail;
- }
- ipath_stats.sps_hwerrs++;
-
- /* Always clear the error status register, except MEMBISTFAIL,
- * regardless of whether we continue or stop using the chip.
- * We want that set so we know it failed, even across driver reload.
- * We'll still ignore it in the hwerrmask. We do this partly for
- * diagnostics, but also for support */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
-
- hwerrs &= dd->ipath_hwerrmask;
-
- /* We log some errors to EEPROM, check if we have any of those. */
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
- if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
- ipath_inc_eeprom_err(dd, log_idx, 1);
-
- /*
- * make sure we get this much out, unless told to be quiet,
- * it's a parity error we may recover from,
- * or it's occurred within the last 5 seconds
- */
- if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
- RXE_EAGER_PARITY)) ||
- (ipath_debug & __IPATH_VERBDBG))
- dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
- dd->ipath_lasthwerror |= hwerrs;
-
- if (hwerrs & ~dd->ipath_hwe_bitsextant)
- ipath_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~dd->ipath_hwe_bitsextant));
-
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
- /*
- * parity errors in send memory are recoverable,
- * just cancel the send (if indicated in * sendbuffererror),
- * count the occurrence, unfreeze (if no other handled
- * hardware error bits are set), and continue. They can
- * occur if a processor speculative read is done to the PIO
- * buffer while we are sending a packet, for example.
- */
- if (hwerrs & TXE_PIO_PARITY) {
- ipath_ht_txe_recover(dd);
- hwerrs &= ~TXE_PIO_PARITY;
- }
-
- if (!hwerrs) {
- ipath_dbg("Clearing freezemode on ignored or "
- "recovered hardware error\n");
- ipath_clear_freeze(dd);
- }
- }
-
- *msg = '\0';
-
- /*
- * may someday want to decode into which bits are which
- * functional area for parity errors, etc.
- */
- if (hwerrs & (infinipath_hwe_htcmemparityerr_mask
- << INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT)) {
- bits = (u32) ((hwerrs >>
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) &
- INFINIPATH_HWE_HTCMEMPARITYERR_MASK);
- snprintf(bitsmsg, sizeof bitsmsg, "[HTC Parity Errs %x] ",
- bits);
- strlcat(msg, bitsmsg, msgl);
- }
-
- ipath_format_hwerrors(hwerrs,
- ipath_6110_hwerror_msgs,
- ARRAY_SIZE(ipath_6110_hwerror_msgs),
- msg, msgl);
-
- if (hwerrs & (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS))
- hwerr_crcbits(dd, hwerrs, msg, msgl);
-
- if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
- strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]",
- msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
- INFINIPATH_HWE_COREPLL_RFSLIP | \
- INFINIPATH_HWE_HTBPLL_FBSLIP | \
- INFINIPATH_HWE_HTBPLL_RFSLIP | \
- INFINIPATH_HWE_HTAPLL_FBSLIP | \
- INFINIPATH_HWE_HTAPLL_RFSLIP)
-
- if (hwerrs & _IPATH_PLL_FAIL) {
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PLL failed (%llx), InfiniPath hardware unusable]",
- (unsigned long long) (hwerrs & _IPATH_PLL_FAIL));
- strlcat(msg, bitsmsg, msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
- /*
- * If it occurs, it is left masked since the eternal
- * interface is unused
- */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs) {
- /*
- * if any set that we aren't ignoring; only
- * make the complaint once, in case it's stuck
- * or recurring, and we get here multiple
- * times.
- * force link down, so switch knows, and
- * LEDs are turned off
- */
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- ipath_setup_ht_setextled(dd,
- INFINIPATH_IBCS_L_STATE_DOWN,
- INFINIPATH_IBCS_LT_STATE_DISABLED);
- ipath_dev_err(dd, "Fatal Hardware Error (freeze "
- "mode), no longer usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- /*
- * mark as not usable, at a minimum until driver
- * is reloaded, probably until reboot, since no
- * other reset is possible.
- */
- dd->ipath_flags &= ~IPATH_INITTED;
- } else {
- *msg = 0; /* recovered from all of them */
- }
- if (*msg)
- ipath_dev_err(dd, "%s hardware error\n", msg);
- if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
- /*
- * for status file; if no trailing brace is copied,
- * we'll know it was truncated.
- */
- snprintf(dd->ipath_freezemsg,
- dd->ipath_freezelen, "{%s}", msg);
-
-bail:;
-}
-
-/**
- * ipath_ht_boardname - fill in the board name
- * @dd: the infinipath device
- * @name: the output buffer
- * @namelen: the size of the output buffer
- *
- * fill in the board name, based on the board revision register
- */
-static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
- size_t namelen)
-{
- char *n = NULL;
- u8 boardrev = dd->ipath_boardrev;
- int ret = 0;
-
- switch (boardrev) {
- case 5:
- /*
- * original production board; two production levels, with
- * different serial number ranges. See ipath_ht_early_init() for
- * case where we enable IPATH_GPIO_INTR for later serial # range.
- * Original 112* serial number is no longer supported.
- */
- n = "InfiniPath_QHT7040";
- break;
- case 7:
- /* small form factor production board */
- n = "InfiniPath_QHT7140";
- break;
- default: /* don't know, just print the number */
- ipath_dev_err(dd, "Don't yet know about board "
- "with ID %u\n", boardrev);
- snprintf(name, namelen, "Unknown_InfiniPath_QHT7xxx_%u",
- boardrev);
- break;
- }
- if (n)
- snprintf(name, namelen, "%s", n);
-
- if (ret) {
- ipath_dev_err(dd, "Unsupported InfiniPath board %s!\n", name);
- goto bail;
- }
- if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 ||
- dd->ipath_minrev > 4)) {
- /*
- * This version of the driver only supports Rev 3.2 - 3.4
- */
- ipath_dev_err(dd,
- "Unsupported InfiniPath hardware revision %u.%u!\n",
- dd->ipath_majrev, dd->ipath_minrev);
- ret = 1;
- goto bail;
- }
- /*
- * pkt/word counters are 32 bit, and therefore wrap fast enough
- * that we snapshot them from a timer, and maintain 64 bit shadow
- * copies
- */
- dd->ipath_flags |= IPATH_32BITCOUNTERS;
- dd->ipath_flags |= IPATH_GPIO_INTR;
- if (dd->ipath_lbus_speed != 800)
- ipath_dev_err(dd,
- "Incorrectly configured for HT @ %uMHz\n",
- dd->ipath_lbus_speed);
-
- /*
- * set here, not in ipath_init_*_funcs because we have to do
- * it after we can read chip registers.
- */
- dd->ipath_ureg_align =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
-
-bail:
- return ret;
-}
-
-static void ipath_check_htlink(struct ipath_devdata *dd)
-{
- u8 linkerr, link_off, i;
-
- for (i = 0; i < 2; i++) {
- link_off = dd->ipath_ht_slave_off + i * 4 + 0xd;
- if (pci_read_config_byte(dd->pcidev, link_off, &linkerr))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkerror%d of HT slave/primary block\n",
- i);
- else if (linkerr & 0xf0) {
- ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
- "clearing\n", linkerr >> 4, i);
- /*
- * writing the linkerr bits that are set should
- * clear them
- */
- if (pci_write_config_byte(dd->pcidev, link_off,
- linkerr))
- ipath_dbg("Failed write to clear HT "
- "linkerror%d\n", i);
- if (pci_read_config_byte(dd->pcidev, link_off,
- &linkerr))
- dev_info(&dd->pcidev->dev,
- "Couldn't reread linkerror%d of "
- "HT slave/primary block\n", i);
- else if (linkerr & 0xf0)
- dev_info(&dd->pcidev->dev,
- "HT linkerror%d bits 0x%x "
- "couldn't be cleared\n",
- i, linkerr >> 4);
- }
- }
-}
-
-static int ipath_setup_ht_reset(struct ipath_devdata *dd)
-{
- ipath_dbg("No reset possible for this InfiniPath hardware\n");
- return 0;
-}
-
-#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
-#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
-
-/*
- * Bits 13-15 of command==0 is slave/primary block. Clear any HT CRC
- * errors. We only bother to do this at load time, because it's OK if
- * it happened before we were loaded (first time after boot/reset),
- * but any time after that, it's fatal anyway. Also need to not check
- * for upper byte errors if we are in 8 bit mode, so figure out
- * our width. For now, at least, also complain if it's 8 bit.
- */
-static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
- int pos, u8 cap_type)
-{
- u8 linkwidth = 0, linkerr, link_a_b_off, link_off;
- u16 linkctrl = 0;
- int i;
-
- dd->ipath_ht_slave_off = pos;
- /* command word, master_host bit */
- /* master host || slave */
- if ((cap_type >> 2) & 1)
- link_a_b_off = 4;
- else
- link_a_b_off = 0;
- ipath_cdbg(VERBOSE, "HT%u (Link %c) connected to processor\n",
- link_a_b_off ? 1 : 0,
- link_a_b_off ? 'B' : 'A');
-
- link_a_b_off += pos;
-
- /*
- * check both link control registers; clear both HT CRC sets if
- * necessary.
- */
- for (i = 0; i < 2; i++) {
- link_off = pos + i * 4 + 0x4;
- if (pci_read_config_word(pdev, link_off, &linkctrl))
- ipath_dev_err(dd, "Couldn't read HT link control%d "
- "register\n", i);
- else if (linkctrl & (0xf << 8)) {
- ipath_cdbg(VERBOSE, "Clear linkctrl%d CRC Error "
- "bits %x\n", i, linkctrl & (0xf << 8));
- /*
- * now write them back to clear the error.
- */
- pci_write_config_word(pdev, link_off,
- linkctrl & (0xf << 8));
- }
- }
-
- /*
- * As with HT CRC bits, same for protocol errors that might occur
- * during boot.
- */
- for (i = 0; i < 2; i++) {
- link_off = pos + i * 4 + 0xd;
- if (pci_read_config_byte(pdev, link_off, &linkerr))
- dev_info(&pdev->dev, "Couldn't read linkerror%d "
- "of HT slave/primary block\n", i);
- else if (linkerr & 0xf0) {
- ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
- "clearing\n", linkerr >> 4, i);
- /*
- * writing the linkerr bits that are set will clear
- * them
- */
- if (pci_write_config_byte
- (pdev, link_off, linkerr))
- ipath_dbg("Failed write to clear HT "
- "linkerror%d\n", i);
- if (pci_read_config_byte(pdev, link_off, &linkerr))
- dev_info(&pdev->dev, "Couldn't reread "
- "linkerror%d of HT slave/primary "
- "block\n", i);
- else if (linkerr & 0xf0)
- dev_info(&pdev->dev, "HT linkerror%d bits "
- "0x%x couldn't be cleared\n",
- i, linkerr >> 4);
- }
- }
-
- /*
- * this is just for our link to the host, not devices connected
- * through tunnel.
- */
-
- if (pci_read_config_byte(pdev, link_a_b_off + 7, &linkwidth))
- ipath_dev_err(dd, "Couldn't read HT link width "
- "config register\n");
- else {
- u32 width;
- switch (linkwidth & 7) {
- case 5:
- width = 4;
- break;
- case 4:
- width = 2;
- break;
- case 3:
- width = 32;
- break;
- case 1:
- width = 16;
- break;
- case 0:
- default: /* if wrong, assume 8 bit */
- width = 8;
- break;
- }
-
- dd->ipath_lbus_width = width;
-
- if (linkwidth != 0x11) {
- ipath_dev_err(dd, "Not configured for 16 bit HT "
- "(%x)\n", linkwidth);
- if (!(linkwidth & 0xf)) {
- ipath_dbg("Will ignore HT lane1 errors\n");
- dd->ipath_flags |= IPATH_8BIT_IN_HT0;
- }
- }
- }
-
- /*
- * this is just for our link to the host, not devices connected
- * through tunnel.
- */
- if (pci_read_config_byte(pdev, link_a_b_off + 0xd, &linkwidth))
- ipath_dev_err(dd, "Couldn't read HT link frequency "
- "config register\n");
- else {
- u32 speed;
- switch (linkwidth & 0xf) {
- case 6:
- speed = 1000;
- break;
- case 5:
- speed = 800;
- break;
- case 4:
- speed = 600;
- break;
- case 3:
- speed = 500;
- break;
- case 2:
- speed = 400;
- break;
- case 1:
- speed = 300;
- break;
- default:
- /*
- * assume reserved and vendor-specific are 200...
- */
- case 0:
- speed = 200;
- break;
- }
- dd->ipath_lbus_speed = speed;
- }
-
- snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
- "HyperTransport,%uMHz,x%u\n",
- dd->ipath_lbus_speed,
- dd->ipath_lbus_width);
-}
-
-static int ipath_ht_intconfig(struct ipath_devdata *dd)
-{
- int ret;
-
- if (dd->ipath_intconfig) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
- dd->ipath_intconfig); /* interrupt address */
- ret = 0;
- } else {
- ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
- "interrupt address\n");
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
- struct ht_irq_msg *msg)
-{
- struct ipath_devdata *dd = pci_get_drvdata(dev);
- u64 prev_intconfig = dd->ipath_intconfig;
-
- dd->ipath_intconfig = msg->address_lo;
- dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
-
- /*
- * If the previous value of dd->ipath_intconfig is zero, we're
- * getting configured for the first time, and must not program the
- * intconfig register here (it will be programmed later, when the
- * hardware is ready). Otherwise, we should.
- */
- if (prev_intconfig)
- ipath_ht_intconfig(dd);
-}
-
-/**
- * ipath_setup_ht_config - setup the interruptconfig register
- * @dd: the infinipath device
- * @pdev: the PCI device
- *
- * setup the interruptconfig register from the HT config info.
- * Also clear CRC errors in HT linkcontrol, if necessary.
- * This is done only for the real hardware. It is done before
- * chip address space is initted, so can't touch infinipath registers
- */
-static int ipath_setup_ht_config(struct ipath_devdata *dd,
- struct pci_dev *pdev)
-{
- int pos, ret;
-
- ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
- if (ret < 0) {
- ipath_dev_err(dd, "Couldn't create interrupt handler: "
- "err %d\n", ret);
- goto bail;
- }
- dd->ipath_irq = ret;
- ret = 0;
-
- /*
- * Handle clearing CRC errors in linkctrl register if necessary. We
- * do this early, before we ever enable errors or hardware errors,
- * mostly to avoid causing the chip to enter freeze mode.
- */
- pos = pci_find_capability(pdev, PCI_CAP_ID_HT);
- if (!pos) {
- ipath_dev_err(dd, "Couldn't find HyperTransport "
- "capability; no interrupts\n");
- ret = -ENODEV;
- goto bail;
- }
- do {
- u8 cap_type;
-
- /*
- * The HT capability type byte is 3 bytes after the
- * capability byte.
- */
- if (pci_read_config_byte(pdev, pos + 3, &cap_type)) {
- dev_info(&pdev->dev, "Couldn't read config "
- "command @ %d\n", pos);
- continue;
- }
- if (!(cap_type & 0xE0))
- slave_or_pri_blk(dd, pdev, pos, cap_type);
- } while ((pos = pci_find_next_capability(pdev, pos,
- PCI_CAP_ID_HT)));
-
- dd->ipath_flags |= IPATH_SWAP_PIOBUFS;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_setup_ht_cleanup - clean up any per-chip chip-specific stuff
- * @dd: the infinipath device
- *
- * Called during driver unload.
- * This is currently a nop for the HT chip, not for all chips
- */
-static void ipath_setup_ht_cleanup(struct ipath_devdata *dd)
-{
-}
-
-/**
- * ipath_setup_ht_setextled - set the state of the two external LEDs
- * @dd: the infinipath device
- * @lst: the L state
- * @ltst: the LT state
- *
- * Set the state of the two external LEDs, to indicate physical and
- * logical state of IB link. For this chip (at least with recommended
- * board pinouts), LED1 is Green (physical state), and LED2 is Yellow
- * (logical state)
- *
- * Note: We try to match the Mellanox HCA LED behavior as best
- * we can. Green indicates physical link state is OK (something is
- * plugged in, and we can train).
- * Amber indicates the link is logically up (ACTIVE).
- * Mellanox further blinks the amber LED to indicate data packet
- * activity, but we have no hardware support for that, so it would
- * require waking up every 10-20 msecs and checking the counters
- * on the chip, and then turning the LED off if appropriate. That's
- * visible overhead, so not something we will do.
- *
- */
-static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
- u64 lst, u64 ltst)
-{
- u64 extctl;
- unsigned long flags = 0;
-
- /* the diags use the LED to indicate diag info, so we leave
- * the external LED alone when the diags are running */
- if (ipath_diag_inuse)
- return;
-
- /* Allow override of LED display for, e.g. Locating system in rack */
- if (dd->ipath_led_override) {
- ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
- ? INFINIPATH_IBCS_LT_STATE_LINKUP
- : INFINIPATH_IBCS_LT_STATE_DISABLED;
- lst = (dd->ipath_led_override & IPATH_LED_LOG)
- ? INFINIPATH_IBCS_L_STATE_ACTIVE
- : INFINIPATH_IBCS_L_STATE_DOWN;
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- /*
- * start by setting both LED control bits to off, then turn
- * on the appropriate bit(s).
- */
- if (dd->ipath_boardrev == 8) { /* LS/X-1 uses different pins */
- /*
- * major difference is that INFINIPATH_EXTC_LEDGBLERR_OFF
- * is inverted, because it is normally used to indicate
- * a hardware fault at reset, if there were errors
- */
- extctl = (dd->ipath_extctrl & ~INFINIPATH_EXTC_LEDGBLOK_ON)
- | INFINIPATH_EXTC_LEDGBLERR_OFF;
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
- extctl &= ~INFINIPATH_EXTC_LEDGBLERR_OFF;
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LEDGBLOK_ON;
- } else {
- extctl = dd->ipath_extctrl &
- ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
- INFINIPATH_EXTC_LED2PRIPORT_ON);
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
- extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
- }
- dd->ipath_extctrl = extctl;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-}
-
-static void ipath_init_ht_variables(struct ipath_devdata *dd)
-{
- /*
- * setup the register offsets, since they are different for each
- * chip
- */
- dd->ipath_kregs = &ipath_ht_kregs;
- dd->ipath_cregs = &ipath_ht_cregs;
-
- dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
- dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
- dd->ipath_gpio_sda = IPATH_GPIO_SDA;
- dd->ipath_gpio_scl = IPATH_GPIO_SCL;
-
- /*
- * Fill in data for field-values that change in newer chips.
- * We dynamically specify only the mask for LINKTRAININGSTATE
- * and only the shift for LINKSTATE, as they are the only ones
- * that change. Also precalculate the 3 link states of interest
- * and the combined mask.
- */
- dd->ibcs_ls_shift = IBA6110_IBCS_LINKSTATE_SHIFT;
- dd->ibcs_lts_mask = IBA6110_IBCS_LINKTRAININGSTATE_MASK;
- dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
- dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
- dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
- dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
- dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
-
- /*
- * Fill in data for ibcc field-values that change in newer chips.
- * We dynamically specify only the mask for LINKINITCMD
- * and only the shift for LINKCMD and MAXPKTLEN, as they are
- * the only ones that change.
- */
- dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
- dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
- dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
-
- /* Fill in shifts for RcvCtrl. */
- dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
- dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
- dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT;
- dd->ipath_r_portcfg_shift = 0; /* Not on IBA6110 */
-
- dd->ipath_i_bitsextant =
- (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
- (INFINIPATH_I_RCVAVAIL_MASK <<
- INFINIPATH_I_RCVAVAIL_SHIFT) |
- INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
- INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
-
- dd->ipath_e_bitsextant =
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
- INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
- INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
- INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
- INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
- INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
- INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
- INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
- INFINIPATH_E_HARDWARE;
-
- dd->ipath_hwe_bitsextant =
- (INFINIPATH_HWE_HTCMEMPARITYERR_MASK <<
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
- INFINIPATH_HWE_HTCLNKABYTE0CRCERR |
- INFINIPATH_HWE_HTCLNKABYTE1CRCERR |
- INFINIPATH_HWE_HTCLNKBBYTE0CRCERR |
- INFINIPATH_HWE_HTCLNKBBYTE1CRCERR |
- INFINIPATH_HWE_HTCMISCERR4 |
- INFINIPATH_HWE_HTCMISCERR5 | INFINIPATH_HWE_HTCMISCERR6 |
- INFINIPATH_HWE_HTCMISCERR7 |
- INFINIPATH_HWE_HTCBUSTREQPARITYERR |
- INFINIPATH_HWE_HTCBUSTRESPPARITYERR |
- INFINIPATH_HWE_HTCBUSIREQPARITYERR |
- INFINIPATH_HWE_RXDSYNCMEMPARITYERR |
- INFINIPATH_HWE_MEMBISTFAILED |
- INFINIPATH_HWE_COREPLL_FBSLIP |
- INFINIPATH_HWE_COREPLL_RFSLIP |
- INFINIPATH_HWE_HTBPLL_FBSLIP |
- INFINIPATH_HWE_HTBPLL_RFSLIP |
- INFINIPATH_HWE_HTAPLL_FBSLIP |
- INFINIPATH_HWE_HTAPLL_RFSLIP |
- INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
- INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
-
- dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
- dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
- dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
- dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
-
- /*
- * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
- * 2 is Some Misc, 3 is reserved for future.
- */
- dd->ipath_eep_st_masks[0].hwerrs_to_log =
- INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[1].hwerrs_to_log =
- INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
-
- dd->delay_mult = 2; /* SDR, 4X, can't change */
-
- dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
- dd->ipath_link_speed_supported = IPATH_IB_SDR;
- dd->ipath_link_width_enabled = IB_WIDTH_4X;
- dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
- /* these can't change for this chip, so set once */
- dd->ipath_link_width_active = dd->ipath_link_width_enabled;
- dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
-}
-
-/**
- * ipath_ht_init_hwerrors - enable hardware errors
- * @dd: the infinipath device
- *
- * now that we have finished initializing everything that might reasonably
- * cause a hardware error, and cleared those errors bits as they occur,
- * we can enable hardware errors in the mask (potentially enabling
- * freeze mode), and enable hardware errors as errors (along with
- * everything else) in errormask
- */
-static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
-{
- ipath_err_t val;
- u64 extsval;
-
- extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-
- if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
- ipath_dev_err(dd, "MemBIST did not complete!\n");
- if (extsval & INFINIPATH_EXTS_MEMBIST_CORRECT)
- ipath_dbg("MemBIST corrected\n");
-
- ipath_check_htlink(dd);
-
- /* barring bugs, all hwerrors become interrupts, which can */
- val = -1LL;
- /* don't look at crc lane1 if 8 bit */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
- val &= ~infinipath_hwe_htclnkabyte1crcerr;
- /* don't look at crc lane1 if 8 bit */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
- val &= ~infinipath_hwe_htclnkbbyte1crcerr;
-
- /*
- * disable RXDSYNCMEMPARITY because external serdes is unused,
- * and therefore the logic will never be used or initialized,
- * and uninitialized state will normally result in this error
- * being asserted. Similarly for the external serdess pll
- * lock signal.
- */
- val &= ~(INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_RXDSYNCMEMPARITYERR);
-
- /*
- * Disable MISCERR4 because of an inversion in the HT core
- * logic checking for errors that cause this bit to be set.
- * The errata can also cause the protocol error bit to be set
- * in the HT config space linkerror register(s).
- */
- val &= ~INFINIPATH_HWE_HTCMISCERR4;
-
- /*
- * PLL ignored because unused MDIO interface has a logic problem
- */
- if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
- val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- dd->ipath_hwerrmask = val;
-}
-
-
-
-
-/**
- * ipath_ht_bringup_serdes - bring up the serdes
- * @dd: the infinipath device
- */
-static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
-{
- u64 val, config1;
- int ret = 0, change = 0;
-
- ipath_dbg("Trying to bringup serdes\n");
-
- if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
- INFINIPATH_HWE_SERDESPLLFAILED)
- {
- ipath_dbg("At start, serdes PLL failed bit set in "
- "hwerrstatus, clearing and continuing\n");
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- INFINIPATH_HWE_SERDESPLLFAILED);
- }
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
- config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
-
- ipath_cdbg(VERBOSE, "Initial serdes status is config0=%llx "
- "config1=%llx, sstatus=%llx xgxs %llx\n",
- (unsigned long long) val, (unsigned long long) config1,
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- /* force reset on */
- val |= INFINIPATH_SERDC0_RESET_PLL
- /* | INFINIPATH_SERDC0_RESET_MASK */
- ;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
- udelay(15); /* need pll reset set at least for a bit */
-
- if (val & INFINIPATH_SERDC0_RESET_PLL) {
- u64 val2 = val &= ~INFINIPATH_SERDC0_RESET_PLL;
- /* set lane resets, and tx idle, during pll reset */
- val2 |= INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE;
- ipath_cdbg(VERBOSE, "Clearing serdes PLL reset (writing "
- "%llx)\n", (unsigned long long) val2);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
- val2);
- /*
- * be sure chip saw it
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- /*
- * need pll reset clear at least 11 usec before lane
- * resets cleared; give it a few more
- */
- udelay(15);
- val = val2; /* for check below */
- }
-
- if (val & (INFINIPATH_SERDC0_RESET_PLL |
- INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE)) {
- val &= ~(INFINIPATH_SERDC0_RESET_PLL |
- INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE);
- /* clear them */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
- val);
- }
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- if (val & INFINIPATH_XGXS_RESET) {
- /* normally true after boot */
- val &= ~INFINIPATH_XGXS_RESET;
- change = 1;
- }
- if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
- INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
- /* need to compensate for Tx inversion in partner */
- val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
- INFINIPATH_XGXS_RX_POL_SHIFT);
- val |= dd->ipath_rx_pol_inv <<
- INFINIPATH_XGXS_RX_POL_SHIFT;
- change = 1;
- }
- if (change)
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- /* clear current and de-emphasis bits */
- config1 &= ~0x0ffffffff00ULL;
- /* set current to 20ma */
- config1 |= 0x00000000000ULL;
- /* set de-emphasis to -5.68dB */
- config1 |= 0x0cccc000000ULL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
-
- ipath_cdbg(VERBOSE, "After setup: serdes status is config0=%llx "
- "config1=%llx, sstatus=%llx xgxs %llx\n",
- (unsigned long long) val, (unsigned long long) config1,
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- return ret; /* for now, say we always succeeded */
-}
-
-/**
- * ipath_ht_quiet_serdes - set serdes to txidle
- * @dd: the infinipath device
- * driver is being unloaded
- */
-static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
-{
- u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- val |= INFINIPATH_SERDC0_TXIDLE;
- ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
- (unsigned long long) val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
-}
-
-/**
- * ipath_pe_put_tid - write a TID in chip
- * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to update
- * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
- * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
- *
- * This exists as a separate routine to allow for special locking etc.
- * It's used for both the full cleanup on exit, as well as the normal
- * setup and teardown.
- */
-static void ipath_ht_put_tid(struct ipath_devdata *dd,
- u64 __iomem *tidptr, u32 type,
- unsigned long pa)
-{
- if (!dd->ipath_kregbase)
- return;
-
- if (pa != dd->ipath_tidinvalid) {
- if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
- dev_info(&dd->pcidev->dev,
- "physaddr %lx has more than "
- "40 bits, using only 40!!!\n", pa);
- pa &= INFINIPATH_RT_ADDR_MASK;
- }
- if (type == RCVHQ_RCV_TYPE_EAGER)
- pa |= dd->ipath_tidtemplate;
- else {
- /* in words (fixed, full page). */
- u64 lenvalid = PAGE_SIZE >> 2;
- lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
- pa |= lenvalid | INFINIPATH_RT_VALID;
- }
- }
-
- writeq(pa, tidptr);
-}
-
-
-/**
- * ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
- * @dd: the infinipath device
- * @port: the port
- *
- * Used from ipath_close(), and at chip initialization.
- */
-static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
-{
- u64 __iomem *tidbase;
- int i;
-
- if (!dd->ipath_kregbase)
- return;
-
- ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
-
- /*
- * need to invalidate all of the expected TID entries for this
- * port, so we don't have valid entries that might somehow get
- * used (early in next use of this port, or through some bug)
- */
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- port * dd->ipath_rcvtidcnt *
- sizeof(*tidbase));
- for (i = 0; i < dd->ipath_rcvtidcnt; i++)
- ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
-
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvegrbase +
- port * dd->ipath_rcvegrcnt *
- sizeof(*tidbase));
-
- for (i = 0; i < dd->ipath_rcvegrcnt; i++)
- ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
- dd->ipath_tidinvalid);
-}
-
-/**
- * ipath_ht_tidtemplate - setup constants for TID updates
- * @dd: the infinipath device
- *
- * We setup stuff that we use a lot, to avoid calculating each time
- */
-static void ipath_ht_tidtemplate(struct ipath_devdata *dd)
-{
- dd->ipath_tidtemplate = dd->ipath_ibmaxlen >> 2;
- dd->ipath_tidtemplate <<= INFINIPATH_RT_BUFSIZE_SHIFT;
- dd->ipath_tidtemplate |= INFINIPATH_RT_VALID;
-
- /*
- * work around chip errata bug 7358, by marking invalid tids
- * as having max length
- */
- dd->ipath_tidinvalid = (-1LL & INFINIPATH_RT_BUFSIZE_MASK) <<
- INFINIPATH_RT_BUFSIZE_SHIFT;
-}
-
-static int ipath_ht_early_init(struct ipath_devdata *dd)
-{
- u32 __iomem *piobuf;
- u32 pioincr, val32;
- int i;
-
- /*
- * one cache line; long IB headers will spill over into received
- * buffer
- */
- dd->ipath_rcvhdrentsize = 16;
- dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
-
- /*
- * For HT, we allocate a somewhat overly large eager buffer,
- * such that we can guarantee that we can receive the largest
- * packet that we can send out. To truly support a 4KB MTU,
- * we need to bump this to a large value. To date, other than
- * testing, we have never encountered an HCA that can really
- * send 4KB MTU packets, so we do not handle that (we'll get
- * errors interrupts if we ever see one).
- */
- dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
-
- /*
- * the min() check here is currently a nop, but it may not
- * always be, depending on just how we do ipath_rcvegrbufsize
- */
- dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
- dd->ipath_rcvegrbufsize);
- dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
- ipath_ht_tidtemplate(dd);
-
- /*
- * zero all the TID entries at startup. We do this for sanity,
- * in case of a previous driver crash of some kind, and also
- * because the chip powers up with these memories in an unknown
- * state. Use portcnt, not cfgports, since this is for the
- * full chip, not for current (possibly different) configuration
- * value.
- * Chip Errata bug 6447
- */
- for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
- ipath_ht_clear_tids(dd, val32);
-
- /*
- * write the pbc of each buffer, to be sure it's initialized, then
- * cancel all the buffers, and also abort any packets that might
- * have been in flight for some reason (the latter is for driver
- * unload/reload, but isn't a bad idea at first init). PIO send
- * isn't enabled at this point, so there is no danger of sending
- * these out on the wire.
- * Chip Errata bug 6610
- */
- piobuf = (u32 __iomem *) (((char __iomem *)(dd->ipath_kregbase)) +
- dd->ipath_piobufbase);
- pioincr = dd->ipath_palign / sizeof(*piobuf);
- for (i = 0; i < dd->ipath_piobcnt2k; i++) {
- /*
- * reasonable word count, just to init pbc
- */
- writel(16, piobuf);
- piobuf += pioincr;
- }
-
- ipath_get_eeprom_info(dd);
- if (dd->ipath_boardrev == 5) {
- /*
- * Later production QHT7040 has same changes as QHT7140, so
- * can use GPIO interrupts. They have serial #'s starting
- * with 128, rather than 112.
- */
- if (dd->ipath_serial[0] == '1' &&
- dd->ipath_serial[1] == '2' &&
- dd->ipath_serial[2] == '8')
- dd->ipath_flags |= IPATH_GPIO_INTR;
- else {
- ipath_dev_err(dd, "Unsupported InfiniPath board "
- "(serial number %.16s)!\n",
- dd->ipath_serial);
- return 1;
- }
- }
-
- if (dd->ipath_minrev >= 4) {
- /* Rev4+ reports extra errors via internal GPIO pins */
- dd->ipath_flags |= IPATH_GPIO_ERRINTRS;
- dd->ipath_gpio_mask |= IPATH_GPIO_ERRINTR_MASK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
-
- return 0;
-}
-
-
-/**
- * ipath_init_ht_get_base_info - set chip-specific flags for user code
- * @dd: the infinipath device
- * @kbase: ipath_base_info pointer
- *
- * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithms.
- */
-static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
-{
- struct ipath_base_info *kinfo = kbase;
-
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_HT |
- IPATH_RUNTIME_PIO_REGSWAPPED;
-
- if (pd->port_dd->ipath_minrev < 4)
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_RCVHDR_COPY;
-
- return 0;
-}
-
-static void ipath_ht_free_irq(struct ipath_devdata *dd)
-{
- free_irq(dd->ipath_irq, dd);
- ht_destroy_irq(dd->ipath_irq);
- dd->ipath_irq = 0;
- dd->ipath_intconfig = 0;
-}
-
-static struct ipath_message_header *
-ipath_ht_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
-{
- return (struct ipath_message_header *)
- &rhf_addr[sizeof(u64) / sizeof(u32)];
-}
-
-static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports)
-{
- dd->ipath_portcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
- dd->ipath_p0_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
-}
-
-static void ipath_ht_read_counters(struct ipath_devdata *dd,
- struct infinipath_counters *cntrs)
-{
- cntrs->LBIntCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt));
- cntrs->LBFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt));
- cntrs->TxSDmaDescCnt = 0;
- cntrs->TxUnsupVLErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt));
- cntrs->TxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt));
- cntrs->TxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt));
- cntrs->TxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt));
- cntrs->TxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt));
- cntrs->TxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt));
- cntrs->TxUnderrunCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt));
- cntrs->TxFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt));
- cntrs->TxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt));
- cntrs->RxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt));
- cntrs->RxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt));
- cntrs->RxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt));
- cntrs->RxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt));
- cntrs->RxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt));
- cntrs->RxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt));
- cntrs->RxICRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt));
- cntrs->RxVCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt));
- cntrs->RxFlowCtrlErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt));
- cntrs->RxBadFormatCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt));
- cntrs->RxLinkProblemCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt));
- cntrs->RxEBPCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt));
- cntrs->RxLPCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt));
- cntrs->RxBufOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt));
- cntrs->RxTIDFullErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt));
- cntrs->RxTIDValidErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt));
- cntrs->RxPKeyMismatchCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt));
- cntrs->RxP0HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt));
- cntrs->RxP1HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt));
- cntrs->RxP2HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt));
- cntrs->RxP3HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt));
- cntrs->RxP4HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt));
- cntrs->RxP5HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP5HdrEgrOvflCnt));
- cntrs->RxP6HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP6HdrEgrOvflCnt));
- cntrs->RxP7HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP7HdrEgrOvflCnt));
- cntrs->RxP8HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP8HdrEgrOvflCnt));
- cntrs->RxP9HdrEgrOvflCnt = 0;
- cntrs->RxP10HdrEgrOvflCnt = 0;
- cntrs->RxP11HdrEgrOvflCnt = 0;
- cntrs->RxP12HdrEgrOvflCnt = 0;
- cntrs->RxP13HdrEgrOvflCnt = 0;
- cntrs->RxP14HdrEgrOvflCnt = 0;
- cntrs->RxP15HdrEgrOvflCnt = 0;
- cntrs->RxP16HdrEgrOvflCnt = 0;
- cntrs->IBStatusChangeCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt));
- cntrs->IBLinkErrRecoveryCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt));
- cntrs->IBLinkDownedCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt));
- cntrs->IBSymbolErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt));
- cntrs->RxVL15DroppedPktCnt = 0;
- cntrs->RxOtherLocalPhyErrCnt = 0;
- cntrs->PcieRetryBufDiagQwordCnt = 0;
- cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs;
- cntrs->LocalLinkIntegrityErrCnt =
- (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
- dd->ipath_lli_errs : dd->ipath_lli_errors;
- cntrs->RxVlErrCnt = 0;
- cntrs->RxDlidFltrCnt = 0;
-}
-
-
-/* no interrupt fallback for these chips */
-static int ipath_ht_nointr_fallback(struct ipath_devdata *dd)
-{
- return 0;
-}
-
-
-/*
- * reset the XGXS (between serdes and IBC). Slightly less intrusive
- * than resetting the IBC or external link state, and useful in some
- * cases to cause some retraining. To do this right, we reset IBC
- * as well.
- */
-static void ipath_ht_xgxs_reset(struct ipath_devdata *dd)
-{
- u64 val, prev_val;
-
- prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val = prev_val | INFINIPATH_XGXS_RESET;
- prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-}
-
-
-static int ipath_ht_get_ib_cfg(struct ipath_devdata *dd, int which)
-{
- int ret;
-
- switch (which) {
- case IPATH_IB_CFG_LWID:
- ret = dd->ipath_link_width_active;
- break;
- case IPATH_IB_CFG_SPD:
- ret = dd->ipath_link_speed_active;
- break;
- case IPATH_IB_CFG_LWID_ENB:
- ret = dd->ipath_link_width_enabled;
- break;
- case IPATH_IB_CFG_SPD_ENB:
- ret = dd->ipath_link_speed_enabled;
- break;
- default:
- ret = -ENOTSUPP;
- break;
- }
- return ret;
-}
-
-
-/* we assume range checking is already done, if needed */
-static int ipath_ht_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
-{
- int ret = 0;
-
- if (which == IPATH_IB_CFG_LWID_ENB)
- dd->ipath_link_width_enabled = val;
- else if (which == IPATH_IB_CFG_SPD_ENB)
- dd->ipath_link_speed_enabled = val;
- else
- ret = -ENOTSUPP;
- return ret;
-}
-
-
-static void ipath_ht_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
-{
-}
-
-
-static int ipath_ht_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
-{
- ipath_setup_ht_setextled(dd, ipath_ib_linkstate(dd, ibcs),
- ipath_ib_linktrstate(dd, ibcs));
- return 0;
-}
-
-
-/**
- * ipath_init_iba6110_funcs - set up the chip-specific function pointers
- * @dd: the infinipath device
- *
- * This is global, and is called directly at init to set up the
- * chip-specific function pointers for later use.
- */
-void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
-{
- dd->ipath_f_intrsetup = ipath_ht_intconfig;
- dd->ipath_f_bus = ipath_setup_ht_config;
- dd->ipath_f_reset = ipath_setup_ht_reset;
- dd->ipath_f_get_boardname = ipath_ht_boardname;
- dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
- dd->ipath_f_early_init = ipath_ht_early_init;
- dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
- dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
- dd->ipath_f_bringup_serdes = ipath_ht_bringup_serdes;
- dd->ipath_f_clear_tids = ipath_ht_clear_tids;
- dd->ipath_f_put_tid = ipath_ht_put_tid;
- dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
- dd->ipath_f_setextled = ipath_setup_ht_setextled;
- dd->ipath_f_get_base_info = ipath_ht_get_base_info;
- dd->ipath_f_free_irq = ipath_ht_free_irq;
- dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
- dd->ipath_f_intr_fallback = ipath_ht_nointr_fallback;
- dd->ipath_f_get_msgheader = ipath_ht_get_msgheader;
- dd->ipath_f_config_ports = ipath_ht_config_ports;
- dd->ipath_f_read_counters = ipath_ht_read_counters;
- dd->ipath_f_xgxs_reset = ipath_ht_xgxs_reset;
- dd->ipath_f_get_ib_cfg = ipath_ht_get_ib_cfg;
- dd->ipath_f_set_ib_cfg = ipath_ht_set_ib_cfg;
- dd->ipath_f_config_jint = ipath_ht_config_jint;
- dd->ipath_f_ib_updown = ipath_ht_ib_updown;
-
- /*
- * initialize chip-specific variables
- */
- ipath_init_ht_variables(dd);
-}
diff --git a/drivers/staging/rdma/ipath/ipath_init_chip.c b/drivers/staging/rdma/ipath/ipath_init_chip.c
deleted file mode 100644
index a5eea19..0000000
--- a/drivers/staging/rdma/ipath/ipath_init_chip.c
+++ /dev/null
@@ -1,1062 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-
-/*
- * min buffers we want to have per port, after driver
- */
-#define IPATH_MIN_USER_PORT_BUFCNT 7
-
-/*
- * Number of ports we are configured to use (to allow for more pio
- * buffers per port, etc.) Zero means use chip value.
- */
-static ushort ipath_cfgports;
-
-module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
-MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
-
-/*
- * Number of buffers reserved for driver (verbs and layered drivers.)
- * Initialized based on number of PIO buffers if not set via module interface.
- * The problem with this is that it's global, but we'll use different
- * numbers for different chip types.
- */
-static ushort ipath_kpiobufs;
-
-static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
-
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
- &ipath_kpiobufs, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
-
-/**
- * create_port0_egr - allocate the eager TID buffers
- * @dd: the infinipath device
- *
- * This code is now quite different for user and kernel, because
- * the kernel uses skb's, for the accelerated network performance.
- * This is the kernel (port0) version.
- *
- * Allocate the eager TID buffers and program them into infinipath.
- * We use the network layer alloc_skb() allocator to allocate the
- * memory, and either use the buffers as is for things like verbs
- * packets, or pass the buffers up to the ipath layered driver and
- * thence the network layer, replacing them as we do so (see
- * ipath_rcv_layer()).
- */
-static int create_port0_egr(struct ipath_devdata *dd)
-{
- unsigned e, egrcnt;
- struct ipath_skbinfo *skbinfo;
- int ret;
-
- egrcnt = dd->ipath_p0_rcvegrcnt;
-
- skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
- if (skbinfo == NULL) {
- ipath_dev_err(dd, "allocation error for eager TID "
- "skb array\n");
- ret = -ENOMEM;
- goto bail;
- }
- for (e = 0; e < egrcnt; e++) {
- /*
- * This is a bit tricky in that we allocate extra
- * space for 2 bytes of the 14 byte ethernet header.
- * These two bytes are passed in the ipath header so
- * the rest of the data is word aligned. We allocate
- * 4 bytes so that the data buffer stays word aligned.
- * See ipath_kreceive() for more details.
- */
- skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
- if (!skbinfo[e].skb) {
- ipath_dev_err(dd, "SKB allocation error for "
- "eager TID %u\n", e);
- while (e != 0)
- dev_kfree_skb(skbinfo[--e].skb);
- vfree(skbinfo);
- ret = -ENOMEM;
- goto bail;
- }
- }
- /*
- * After loop above, so we can test non-NULL to see if ready
- * to use at receive, etc.
- */
- dd->ipath_port0_skbinfo = skbinfo;
-
- for (e = 0; e < egrcnt; e++) {
- dd->ipath_port0_skbinfo[e].phys =
- ipath_map_single(dd->pcidev,
- dd->ipath_port0_skbinfo[e].skb->data,
- dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
- dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
- ((char __iomem *) dd->ipath_kregbase +
- dd->ipath_rcvegrbase),
- RCVHQ_RCV_TYPE_EAGER,
- dd->ipath_port0_skbinfo[e].phys);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int bringup_link(struct ipath_devdata *dd)
-{
- u64 val, ibc;
- int ret = 0;
-
- /* hold IBC in reset */
- dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-
- /*
- * set initial max size pkt IBC will send, including ICRC; it's the
- * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
- */
- val = (dd->ipath_ibmaxlen >> 2) + 1;
- ibc = val << dd->ibcc_mpl_shift;
-
- /* flowcontrolwatermark is in units of KBytes */
- ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
- /*
- * How often flowctrl sent. More or less in usecs; balance against
- * watermark value, so that in theory senders always get a flow
- * control update in time to not let the IB link go idle.
- */
- ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
- /* max error tolerance */
- ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
- /* use "real" buffer space for */
- ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
- /* IB credit flow control. */
- ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
- /* initially come up waiting for TS1, without sending anything. */
- dd->ipath_ibcctrl = ibc;
- /*
- * Want to start out with both LINKCMD and LINKINITCMD in NOP
- * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
- * to stay a NOP. Flag that we are disabled, for the (unlikely)
- * case that some recovery path is trying to bring the link up
- * before we are ready.
- */
- ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT;
- dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
- ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
- (unsigned long long) ibc);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
-
- // be sure chip saw it
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- ret = dd->ipath_f_bringup_serdes(dd);
-
- if (ret)
- dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
- "not usable\n");
- else {
- /* enable IBC */
- dd->ipath_control |= INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
- }
-
- return ret;
-}
-
-static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd;
-
- pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (pd) {
- pd->port_dd = dd;
- pd->port_cnt = 1;
- /* The port 0 pkey table is used by the layer interface. */
- pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
- pd->port_seq_cnt = 1;
- }
- return pd;
-}
-
-static int init_chip_first(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd;
- int ret = 0;
- u64 val;
-
- spin_lock_init(&dd->ipath_kernel_tid_lock);
- spin_lock_init(&dd->ipath_user_tid_lock);
- spin_lock_init(&dd->ipath_sendctrl_lock);
- spin_lock_init(&dd->ipath_uctxt_lock);
- spin_lock_init(&dd->ipath_sdma_lock);
- spin_lock_init(&dd->ipath_gpio_lock);
- spin_lock_init(&dd->ipath_eep_st_lock);
- spin_lock_init(&dd->ipath_sdepb_lock);
- mutex_init(&dd->ipath_eep_lock);
-
- /*
- * skip cfgports stuff because we are not allocating memory,
- * and we don't want problems if the portcnt changed due to
- * cfgports. We do still check and report a difference, if
- * not same (should be impossible).
- */
- dd->ipath_f_config_ports(dd, ipath_cfgports);
- if (!ipath_cfgports)
- dd->ipath_cfgports = dd->ipath_portcnt;
- else if (ipath_cfgports <= dd->ipath_portcnt) {
- dd->ipath_cfgports = ipath_cfgports;
- ipath_dbg("Configured to use %u ports out of %u in chip\n",
- dd->ipath_cfgports, ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- } else {
- dd->ipath_cfgports = dd->ipath_portcnt;
- ipath_dbg("Tried to configured to use %u ports; chip "
- "only supports %u\n", ipath_cfgports,
- ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- }
- /*
- * Allocate full portcnt array, rather than just cfgports, because
- * cleanup iterates across all possible ports.
- */
- dd->ipath_pd = kcalloc(dd->ipath_portcnt, sizeof(*dd->ipath_pd),
- GFP_KERNEL);
-
- if (!dd->ipath_pd) {
- ipath_dev_err(dd, "Unable to allocate portdata array, "
- "failing\n");
- ret = -ENOMEM;
- goto done;
- }
-
- pd = create_portdata0(dd);
- if (!pd) {
- ipath_dev_err(dd, "Unable to allocate portdata for port "
- "0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- dd->ipath_pd[0] = pd;
-
- dd->ipath_rcvtidcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- dd->ipath_rcvtidbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- dd->ipath_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- dd->ipath_rcvegrbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- dd->ipath_palign =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
- dd->ipath_piobufbase =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
- dd->ipath_piosize2k = val & ~0U;
- dd->ipath_piosize4k = val >> 32;
- if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
- ipath_mtu4096 = 0; /* 4KB not supported by this chip */
- dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
- dd->ipath_piobcnt2k = val & ~0U;
- dd->ipath_piobcnt4k = val >> 32;
- dd->ipath_pio2kbase =
- (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase & 0xffffffff));
- if (dd->ipath_piobcnt4k) {
- dd->ipath_pio4kbase = (u32 __iomem *)
- (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase >> 32));
- /*
- * 4K buffers take 2 pages; we use roundup just to be
- * paranoid; we calculate it once here, rather than on
- * ever buf allocate
- */
- dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
- dd->ipath_palign);
- ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
- "(%x aligned)\n",
- dd->ipath_piobcnt2k, dd->ipath_piosize2k,
- dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
- dd->ipath_piosize4k, dd->ipath_pio4kbase,
- dd->ipath_4kalign);
- } else {
- ipath_dbg("%u 2k piobufs @ %p\n",
- dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
- }
-done:
- return ret;
-}
-
-/**
- * init_chip_reset - re-initialize after a reset, or enable
- * @dd: the infinipath device
- *
- * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explicitly, in case reset
- * failed
- */
-static int init_chip_reset(struct ipath_devdata *dd)
-{
- u32 rtmp;
- int i;
- unsigned long flags;
-
- /*
- * ensure chip does no sends or receives, tail updates, or
- * pioavail updates while we re-initialize
- */
- dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
- for (i = 0; i < dd->ipath_portcnt; i++) {
- clear_bit(dd->ipath_r_portenable_shift + i,
- &dd->ipath_rcvctrl);
- clear_bit(dd->ipath_r_intravail_shift + i,
- &dd->ipath_rcvctrl);
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = 0U; /* no sdma, etc */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- if (rtmp != dd->ipath_rcvtidcnt)
- dev_info(&dd->pcidev->dev, "tidcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- if (rtmp != dd->ipath_rcvtidbase)
- dev_info(&dd->pcidev->dev, "tidbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidbase, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- if (rtmp != dd->ipath_rcvegrcnt)
- dev_info(&dd->pcidev->dev, "egrcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- if (rtmp != dd->ipath_rcvegrbase)
- dev_info(&dd->pcidev->dev, "egrbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrbase, rtmp);
-
- return 0;
-}
-
-static int init_pioavailregs(struct ipath_devdata *dd)
-{
- int ret;
-
- dd->ipath_pioavailregs_dma = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
- GFP_KERNEL);
- if (!dd->ipath_pioavailregs_dma) {
- ipath_dev_err(dd, "failed to allocate PIOavail reg area "
- "in memory\n");
- ret = -ENOMEM;
- goto done;
- }
-
- /*
- * we really want L2 cache aligned, but for current CPUs of
- * interest, they are the same.
- */
- dd->ipath_statusp = (u64 *)
- ((char *)dd->ipath_pioavailregs_dma +
- ((2 * L1_CACHE_BYTES +
- dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
- /* copy the current value now that it's really allocated */
- *dd->ipath_statusp = dd->_ipath_status;
- /*
- * setup buffer to hold freeze msg, accessible to apps,
- * following statusp
- */
- dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
- /* and its length */
- dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
-
- ret = 0;
-
-done:
- return ret;
-}
-
-/**
- * init_shadow_tids - allocate the shadow TID array
- * @dd: the infinipath device
- *
- * allocate the shadow TID array, so we can ipath_munlock previous
- * entries. It may make more sense to move the pageshadow to the
- * port data structure, so we only allocate memory for ports actually
- * in use, since we at 8k per port, now.
- */
-static void init_shadow_tids(struct ipath_devdata *dd)
-{
- struct page **pages;
- dma_addr_t *addrs;
-
- pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(struct page *));
- if (!pages) {
- ipath_dev_err(dd, "failed to allocate shadow page * "
- "array, no expected sends!\n");
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(dma_addr_t));
- if (!addrs) {
- ipath_dev_err(dd, "failed to allocate shadow dma handle "
- "array, no expected sends!\n");
- vfree(pages);
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- dd->ipath_pageshadow = pages;
- dd->ipath_physshadow = addrs;
-}
-
-static void enable_chip(struct ipath_devdata *dd, int reinit)
-{
- u32 val;
- u64 rcvmask;
- unsigned long flags;
- int i;
-
- if (!reinit)
- init_waitqueue_head(&ipath_state_wait);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /* Enable PIO send, and update of PIOavail regs to memory. */
- dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
- INFINIPATH_S_PIOBUFAVAILUPD;
-
- /*
- * Set the PIO avail update threshold to host memory
- * on chips that support it.
- */
- if (dd->ipath_pioupd_thresh)
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /*
- * Enable kernel ports' receive and receive interrupt.
- * Other ports done as user opens and inits them.
- */
- rcvmask = 1ULL;
- dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
- (rcvmask << dd->ipath_r_intravail_shift);
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
- dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- /*
- * now ready for use. this should be cleared whenever we
- * detect a reset, or initiate one.
- */
- dd->ipath_flags |= IPATH_INITTED;
-
- /*
- * Init our shadow copies of head from tail values,
- * and write head values to match.
- */
- val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
- ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
-
- /* Initialize so we interrupt on next packet received */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
-
- /*
- * by now pioavail updates to memory should have occurred, so
- * copy them into our working/shadow registers; this is in
- * case something went wrong with abort, but mostly to get the
- * initial values of the generation bit correct.
- */
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- __le64 pioavail;
-
- /*
- * Chip Errata bug 6641; even and odd qwords>3 are swapped.
- */
- if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
- else
- pioavail = dd->ipath_pioavailregs_dma[i];
- /*
- * don't need to worry about ipath_pioavailkernel here
- * because we will call ipath_chg_pioavailkernel() later
- * in initialization, to busy out buffers as needed
- */
- dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
- }
- /* can get counters, stats, etc. */
- dd->ipath_flags |= IPATH_PRESENT;
-}
-
-static int init_housekeeping(struct ipath_devdata *dd, int reinit)
-{
- char boardn[40];
- int ret = 0;
-
- /*
- * have to clear shadow copies of registers at init that are
- * not otherwise set here, or all kinds of bizarre things
- * happen with driver on chip reset
- */
- dd->ipath_rcvhdrsize = 0;
-
- /*
- * Don't clear ipath_flags as 8bit mode was set before
- * entering this func. However, we do set the linkstate to
- * unknown, so we can watch for a transition.
- * PRESENT is set because we want register reads to work,
- * and the kernel infrastructure saw it in config space;
- * We clear it if we have failures.
- */
- dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
- dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
- IPATH_LINKDOWN | IPATH_LINKINIT);
-
- ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
- dd->ipath_revision =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
-
- /*
- * set up fundamental info we need to use the chip; we assume
- * if the revision reg and these regs are OK, we don't need to
- * special case the rest
- */
- dd->ipath_sregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
- dd->ipath_cregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
- dd->ipath_uregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
- ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
- "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
- dd->ipath_uregbase, dd->ipath_cregbase);
- if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
- || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
- ipath_dev_err(dd, "Register read failures from chip, "
- "giving up initialization\n");
- dd->ipath_flags &= ~IPATH_PRESENT;
- ret = -ENODEV;
- goto done;
- }
-
-
- /* clear diagctrl register, in case diags were running and crashed */
- ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
-
- /* clear the initial reset flag, in case first driver load */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- INFINIPATH_E_RESET);
-
- ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
- (unsigned long long) dd->ipath_revision,
- dd->ipath_pcirev);
-
- if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
- ipath_dev_err(dd, "Driver only handles version %d, "
- "chip swversion is %d (%llx), failng\n",
- IPATH_CHIP_SWVERSION,
- (int)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK,
- (unsigned long long) dd->ipath_revision);
- ret = -ENOSYS;
- goto done;
- }
- dd->ipath_majrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
- INFINIPATH_R_CHIPREVMAJOR_MASK);
- dd->ipath_minrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMINOR_SHIFT) &
- INFINIPATH_R_CHIPREVMINOR_MASK);
- dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_BOARDID_SHIFT) &
- INFINIPATH_R_BOARDID_MASK);
-
- ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
-
- snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
- "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
- "SW Compat %u\n",
- IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
- (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
- INFINIPATH_R_ARCH_MASK,
- dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
- (unsigned)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK);
-
- ipath_dbg("%s", dd->ipath_boardversion);
-
- if (ret)
- goto done;
-
- if (reinit)
- ret = init_chip_reset(dd);
- else
- ret = init_chip_first(dd);
-
-done:
- return ret;
-}
-
-static void verify_interrupt(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
-
- if (!dd)
- return; /* being torn down */
-
- /*
- * If we don't have any interrupts, let the user know and
- * don't bother checking again.
- */
- if (dd->ipath_int_counter == 0) {
- if (!dd->ipath_f_intr_fallback(dd))
- dev_err(&dd->pcidev->dev, "No interrupts detected, "
- "not usable.\n");
- else /* re-arm the timer to see if fallback works */
- mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
- } else
- ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
- dd->ipath_int_counter);
-}
-
-/**
- * ipath_init_chip - do the actual initialization sequence on the chip
- * @dd: the infinipath device
- * @reinit: reinitializing, so don't allocate new memory
- *
- * Do the actual initialization sequence on the chip. This is done
- * both from the init routine called from the PCI infrastructure, and
- * when we reset the chip, or detect that it was reset internally,
- * or it's administratively re-enabled.
- *
- * Memory allocation here and in called routines is only done in
- * the first case (reinit == 0). We have to be careful, because even
- * without memory allocation, we need to re-write all the chip registers
- * TIDs, etc. after the reset or enable has completed.
- */
-int ipath_init_chip(struct ipath_devdata *dd, int reinit)
-{
- int ret = 0;
- u32 kpiobufs, defkbufs;
- u32 piobufs, uports;
- u64 val;
- struct ipath_portdata *pd;
- gfp_t gfp_flags = GFP_USER | __GFP_COMP;
-
- ret = init_housekeeping(dd, reinit);
- if (ret)
- goto done;
-
- /*
- * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
- * but then it no longer nicely fits power of two, and since
- * we now use routines that backend onto __get_free_pages, the
- * rest would be wasted.
- */
- dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
- dd->ipath_rcvhdrcnt);
-
- /*
- * Set up the shadow copies of the piobufavail registers,
- * which we compare against the chip registers for now, and
- * the in memory DMA'ed copies of the registers. This has to
- * be done early, before we calculate lastport, etc.
- */
- piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /*
- * calc number of pioavail registers, and save it; we have 2
- * bits per buffer.
- */
- dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
- / (sizeof(u64) * BITS_PER_BYTE / 2);
- uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
- if (piobufs > 144)
- defkbufs = 32 + dd->ipath_pioreserved;
- else
- defkbufs = 16 + dd->ipath_pioreserved;
-
- if (ipath_kpiobufs && (ipath_kpiobufs +
- (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
- int i = (int) piobufs -
- (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
- if (i < 1)
- i = 1;
- dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
- "%d for kernel leaves too few for %d user ports "
- "(%d each); using %u\n", ipath_kpiobufs,
- piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
- /*
- * shouldn't change ipath_kpiobufs, because could be
- * different for different devices...
- */
- kpiobufs = i;
- } else if (ipath_kpiobufs)
- kpiobufs = ipath_kpiobufs;
- else
- kpiobufs = defkbufs;
- dd->ipath_lastport_piobuf = piobufs - kpiobufs;
- dd->ipath_pbufsport =
- uports ? dd->ipath_lastport_piobuf / uports : 0;
- /* if not an even divisor, some user ports get extra buffers */
- dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
- (dd->ipath_pbufsport * uports);
- if (dd->ipath_ports_extrabuf)
- ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
- "ports <= %u\n", dd->ipath_pbufsport,
- dd->ipath_ports_extrabuf);
- dd->ipath_lastpioindex = 0;
- dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
- /* ipath_pioavailshadow initialized earlier */
- ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
- "each for %u user ports\n", kpiobufs,
- piobufs, dd->ipath_pbufsport, uports);
- ret = dd->ipath_f_early_init(dd);
- if (ret) {
- ipath_dev_err(dd, "Early initialization failure\n");
- goto done;
- }
-
- /*
- * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
- * done after early_init.
- */
- dd->ipath_hdrqlast =
- dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
- dd->ipath_rcvhdrentsize);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
- dd->ipath_rcvhdrsize);
-
- if (!reinit) {
- ret = init_pioavailregs(dd);
- init_shadow_tids(dd);
- if (ret)
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
- dd->ipath_pioavailregs_phys);
-
- /*
- * this is to detect s/w errors, which the h/w works around by
- * ignoring the low 6 bits of address, if it wasn't aligned.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
- if (val != dd->ipath_pioavailregs_phys) {
- ipath_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->ipath_pioavailregs_phys,
- (unsigned long long) val);
- ret = -EINVAL;
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
-
- /*
- * make sure we are not in freeze, and PIO send enabled, so
- * writes to pbc happen
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- /*
- * before error clears, since we expect serdes pll errors during
- * this, the first time after reset
- */
- if (bringup_link(dd)) {
- dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
- ret = -ENETDOWN;
- goto done;
- }
-
- /*
- * clear any "expected" hwerrs from reset and/or initialization
- * clear any that aren't enabled (at least this once), and then
- * set the enable mask
- */
- dd->ipath_f_init_hwerrors(dd);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
-
- /* clear all */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
- /* enable errors that are masked, at least this first time. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- ~dd->ipath_maskederrs);
- dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
- dd->ipath_errormask =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
- /* clear any interrupts up to this point (ints still not enabled) */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
-
- dd->ipath_f_tidtemplate(dd);
-
- /*
- * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
- * re-init, the simplest way to handle this is to free
- * existing, and re-allocate.
- * Need to re-create rest of port 0 portdata as well.
- */
- pd = dd->ipath_pd[0];
- if (reinit) {
- struct ipath_portdata *npd;
-
- /*
- * Alloc and init new ipath_portdata for port0,
- * Then free old pd. Could lead to fragmentation, but also
- * makes later support for hot-swap easier.
- */
- npd = create_portdata0(dd);
- if (npd) {
- ipath_free_pddata(dd, pd);
- dd->ipath_pd[0] = npd;
- pd = npd;
- } else {
- ipath_dev_err(dd, "Unable to allocate portdata"
- " for port 0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- }
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = create_port0_egr(dd);
- if (ret) {
- ipath_dev_err(dd, "failed to allocate kernel port's "
- "rcvhdrq and/or egr bufs\n");
- goto done;
- } else {
- enable_chip(dd, reinit);
- }
-
- /* after enable_chip, so pioavailshadow setup */
- ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
-
- /*
- * Cancel any possible active sends from early driver load.
- * Follows early_init because some chips have to initialize
- * PIO buffers in early_init to avoid false parity errors.
- * After enable and ipath_chg_pioavailkernel so we can safely
- * enable pioavail updates and PIOENABLE; packets are now
- * ready to go out.
- */
- ipath_cancel_sends(dd, 1);
-
- if (!reinit) {
- /*
- * Used when we close a port, for DMA already in flight
- * at close.
- */
- dd->ipath_dummy_hdrq = dma_alloc_coherent(
- &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
- &dd->ipath_dummy_hdrq_phys,
- gfp_flags);
- if (!dd->ipath_dummy_hdrq) {
- dev_info(&dd->pcidev->dev,
- "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
- dd->ipath_pd[0]->port_rcvhdrq_size);
- /* fallback to just 0'ing */
- dd->ipath_dummy_hdrq_phys = 0UL;
- }
- }
-
- /*
- * cause retrigger of pending interrupts ignored during init,
- * even if we had errors
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
-
- if (!dd->ipath_stats_timer_active) {
- /*
- * first init, or after an admin disable/enable
- * set up stats retrieval timer, even if we had errors
- * in last portion of setup
- */
- setup_timer(&dd->ipath_stats_timer, ipath_get_faststats,
- (unsigned long)dd);
- /* every 5 seconds; */
- dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
- /* takes ~16 seconds to overflow at full IB 4x bandwdith */
- add_timer(&dd->ipath_stats_timer);
- dd->ipath_stats_timer_active = 1;
- }
-
- /* Set up SendDMA if chip supports it */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ret = setup_sdma(dd);
-
- /* Set up HoL state */
- setup_timer(&dd->ipath_hol_timer, ipath_hol_event, (unsigned long)dd);
-
- dd->ipath_hol_state = IPATH_HOL_UP;
-
-done:
- if (!ret) {
- *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
- if (!dd->ipath_f_intrsetup(dd)) {
- /* now we can enable all interrupts from the chip */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
- -1LL);
- /* force re-interrupt of any pending interrupts. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
- 0ULL);
- /* chip is usable; mark it as initialized */
- *dd->ipath_statusp |= IPATH_STATUS_INITTED;
-
- /*
- * setup to verify we get an interrupt, and fallback
- * to an alternate if necessary and possible
- */
- if (!reinit) {
- setup_timer(&dd->ipath_intrchk_timer,
- verify_interrupt,
- (unsigned long)dd);
- }
- dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
- add_timer(&dd->ipath_intrchk_timer);
- } else
- ipath_dev_err(dd, "No interrupts enabled, couldn't "
- "setup interrupt address\n");
-
- if (dd->ipath_cfgports > ipath_stats.sps_nports)
- /*
- * sps_nports is a global, so, we set it to
- * the highest number of ports of any of the
- * chips we find; we never decrement it, at
- * least for now. Since this might have changed
- * over disable/enable or prior to reset, always
- * do the check and potentially adjust.
- */
- ipath_stats.sps_nports = dd->ipath_cfgports;
- } else
- ipath_dbg("Failed (%d) to initialize chip\n", ret);
-
- /* if ret is non-zero, we probably should do some cleanup
- here... */
- return ret;
-}
-
-static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
-{
- struct ipath_devdata *dd;
- unsigned long flags;
- unsigned short val;
- int ret;
-
- ret = ipath_parse_ushort(str, &val);
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- if (ret < 0)
- goto bail;
-
- if (val == 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- if (dd->ipath_kregbase)
- continue;
- if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
- (dd->ipath_cfgports *
- IPATH_MIN_USER_PORT_BUFCNT)))
- {
- ipath_dev_err(
- dd,
- "Allocating %d PIO bufs for kernel leaves "
- "too few for %d user ports (%d each)\n",
- val, dd->ipath_cfgports - 1,
- IPATH_MIN_USER_PORT_BUFCNT);
- ret = -EINVAL;
- goto bail;
- }
- dd->ipath_lastport_piobuf =
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
- }
-
- ipath_kpiobufs = val;
- ret = 0;
-bail:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_intr.c b/drivers/staging/rdma/ipath/ipath_intr.c
deleted file mode 100644
index 0403fa2..0000000
--- a/drivers/staging/rdma/ipath/ipath_intr.c
+++ /dev/null
@@ -1,1271 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-
-/*
- * Called when we might have an error that is specific to a particular
- * PIO buffer, and may need to cancel that buffer, so it can be re-used.
- */
-void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
-{
- u32 piobcnt;
- unsigned long sbuf[4];
- /*
- * it's possible that sendbuffererror could have bits set; might
- * have already done this as a result of hardware error handling
- */
- piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /* read these before writing errorclear */
- sbuf[0] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror);
- sbuf[1] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 1);
- if (piobcnt > 128)
- sbuf[2] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 2);
- if (piobcnt > 192)
- sbuf[3] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 3);
- else
- sbuf[3] = 0;
-
- if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
- int i;
- if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG) &&
- time_after(dd->ipath_lastcancel, jiffies)) {
- __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
- "SendbufErrs %lx %lx", sbuf[0],
- sbuf[1]);
- if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
- printk(" %lx %lx ", sbuf[2], sbuf[3]);
- printk("\n");
- }
-
- for (i = 0; i < piobcnt; i++)
- if (test_bit(i, sbuf))
- ipath_disarm_piobufs(dd, i, 1);
- /* ignore armlaunch errs for a bit */
- dd->ipath_lastcancel = jiffies+3;
- }
-}
-
-
-/* These are all rcv-related errors which we want to count for stats */
-#define E_SUM_PKTERRS \
- (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
- INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
- INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
- INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
-
-/* These are all send-related errors which we want to count for stats */
-#define E_SUM_ERRS \
- (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
- INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
- INFINIPATH_E_INVALIDADDR)
-
-/*
- * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
- * errors not related to freeze and cancelling buffers. Can't ignore
- * armlaunch because could get more while still cleaning up, and need
- * to cancel those as they happen.
- */
-#define E_SPKT_ERRS_IGNORE \
- (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SMINPKTLEN | \
- INFINIPATH_E_SPKTLEN)
-
-/*
- * these are errors that can occur when the link changes state while
- * a packet is being sent or received. This doesn't cover things
- * like EBP or VCRC that can be the result of a sending having the
- * link change state, so we receive a "known bad" packet.
- */
-#define E_SUM_LINK_PKTERRS \
- (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
- INFINIPATH_E_RUNEXPCHAR)
-
-static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
-{
- u64 ignore_this_time = 0;
-
- ipath_disarm_senderrbufs(dd);
- if ((errs & E_SUM_LINK_PKTERRS) &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- /*
- * This can happen when SMA is trying to bring the link
- * up, but the IB link changes state at the "wrong" time.
- * The IB logic then complains that the packet isn't
- * valid. We don't want to confuse people, so we just
- * don't print them, except at debug
- */
- ipath_dbg("Ignoring packet errors %llx, because link not "
- "ACTIVE\n", (unsigned long long) errs);
- ignore_this_time = errs & E_SUM_LINK_PKTERRS;
- }
-
- return ignore_this_time;
-}
-
-/* generic hw error messages... */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_MSG(a) \
- { \
- .mask = ( INFINIPATH_HWE_TXEMEMPARITYERR_##a << \
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT ), \
- .msg = "TXE " #a " Memory Parity" \
- }
-#define INFINIPATH_HWE_RXEMEMPARITYERR_MSG(a) \
- { \
- .mask = ( INFINIPATH_HWE_RXEMEMPARITYERR_##a << \
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT ), \
- .msg = "RXE " #a " Memory Parity" \
- }
-
-static const struct ipath_hwerror_msgs ipath_generic_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(IBCBUSFRSPCPARITYERR, "IPATH2IB Parity"),
- INFINIPATH_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2IPATH Parity"),
-
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOBUF),
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOPBC),
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOLAUNCHFIFO),
-
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(RCVBUF),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(LOOKUPQ),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EAGERTID),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EXPTID),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(FLAGBUF),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(DATAINFO),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(HDRINFO),
-};
-
-/**
- * ipath_format_hwmsg - format a single hwerror message
- * @msg message buffer
- * @msgl length of message buffer
- * @hwmsg message to add to message buffer
- */
-static void ipath_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
-{
- strlcat(msg, "[", msgl);
- strlcat(msg, hwmsg, msgl);
- strlcat(msg, "]", msgl);
-}
-
-/**
- * ipath_format_hwerrors - format hardware error messages for display
- * @hwerrs hardware errors bit vector
- * @hwerrmsgs hardware error descriptions
- * @nhwerrmsgs number of hwerrmsgs
- * @msg message buffer
- * @msgl message buffer length
- */
-void ipath_format_hwerrors(u64 hwerrs,
- const struct ipath_hwerror_msgs *hwerrmsgs,
- size_t nhwerrmsgs,
- char *msg, size_t msgl)
-{
- int i;
- const int glen =
- ARRAY_SIZE(ipath_generic_hwerror_msgs);
-
- for (i=0; i<glen; i++) {
- if (hwerrs & ipath_generic_hwerror_msgs[i].mask) {
- ipath_format_hwmsg(msg, msgl,
- ipath_generic_hwerror_msgs[i].msg);
- }
- }
-
- for (i=0; i<nhwerrmsgs; i++) {
- if (hwerrs & hwerrmsgs[i].mask) {
- ipath_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
- }
- }
-}
-
-/* return the strings for the most common link states */
-static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
-{
- char *ret;
- u32 state;
-
- state = ipath_ib_state(dd, ibcs);
- if (state == dd->ib_init)
- ret = "Init";
- else if (state == dd->ib_arm)
- ret = "Arm";
- else if (state == dd->ib_active)
- ret = "Active";
- else
- ret = "Down";
- return ret;
-}
-
-void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev)
-{
- struct ib_event event;
-
- event.device = &dd->verbs_dev->ibdev;
- event.element.port_num = 1;
- event.event = ev;
- ib_dispatch_event(&event);
-}
-
-static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
- ipath_err_t errs)
-{
- u32 ltstate, lstate, ibstate, lastlstate;
- u32 init = dd->ib_init;
- u32 arm = dd->ib_arm;
- u32 active = dd->ib_active;
- const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-
- lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
- ibstate = ipath_ib_state(dd, ibcs);
- /* linkstate at last interrupt */
- lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
- ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
-
- /*
- * Since going into a recovery state causes the link state to go
- * down and since recovery is transitory, it is better if we "miss"
- * ever seeing the link training state go into recovery (i.e.,
- * ignore this transition for link state special handling purposes)
- * without even updating ipath_lastibcstat.
- */
- if ((ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN) ||
- (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT) ||
- (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERIDLE))
- goto done;
-
- /*
- * if linkstate transitions into INIT from any of the various down
- * states, or if it transitions from any of the up (INIT or better)
- * states into any of the down states (except link recovery), then
- * call the chip-specific code to take appropriate actions.
- */
- if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
- lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
- /* transitioned to UP */
- if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
- /* link came up, so we must no longer be disabled */
- dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
- ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
- goto skip_ibchange; /* chip-code handled */
- }
- } else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
- (dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
- ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT &&
- ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
- int handled;
- handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
- dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
- if (handled) {
- ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
- goto skip_ibchange; /* chip-code handled */
- }
- }
-
- /*
- * Significant enough to always print and get into logs, if it was
- * unexpected. If it was a requested state change, we'll have
- * already cleared the flags, so we won't print this warning
- */
- if ((ibstate != arm && ibstate != active) &&
- (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
- dev_info(&dd->pcidev->dev, "Link state changed from %s "
- "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
- "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
- }
-
- if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
- ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- u32 lastlts;
- lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
- /*
- * Ignore cycling back and forth from Polling.Active to
- * Polling.Quiet while waiting for the other end of the link
- * to come up, except to try and decide if we are connected
- * to a live IB device or not. We will cycle back and
- * forth between them if no cable is plugged in, the other
- * device is powered off or disabled, etc.
- */
- if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
- lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
- (++dd->ipath_ibpollcnt == 40)) {
- dd->ipath_flags |= IPATH_NOCABLE;
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_NOCABLE;
- ipath_cdbg(LINKVERB, "Set NOCABLE\n");
- }
- ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
- ipath_ibcstatus_str[ltstate], ibstate);
- goto skip_ibchange;
- }
- }
-
- dd->ipath_ibpollcnt = 0; /* not poll*, now */
- ipath_stats.sps_iblink++;
-
- if (ibstate != init && dd->ipath_lastlinkrecov && ipath_linkrecovery) {
- u64 linkrecov;
- linkrecov = ipath_snap_cntr(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- if (linkrecov != dd->ipath_lastlinkrecov) {
- ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
- (unsigned long long) ibcs,
- ib_linkstate(dd, ibcs),
- ipath_ibcstatus_str[ltstate],
- (unsigned long long) linkrecov);
- /* and no more until active again */
- dd->ipath_lastlinkrecov = 0;
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- goto skip_ibchange;
- }
- }
-
- if (ibstate == init || ibstate == arm || ibstate == active) {
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
- if (ibstate == init || ibstate == arm) {
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- }
- if (ibstate == arm) {
- dd->ipath_flags |= IPATH_LINKARMED;
- dd->ipath_flags &= ~(IPATH_LINKUNK |
- IPATH_LINKINIT | IPATH_LINKDOWN |
- IPATH_LINKACTIVE | IPATH_NOCABLE);
- ipath_hol_down(dd);
- } else if (ibstate == init) {
- /*
- * set INIT and DOWN. Down is checked by
- * most of the other code, but INIT is
- * useful to know in a few places.
- */
- dd->ipath_flags |= IPATH_LINKINIT |
- IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK |
- IPATH_LINKARMED | IPATH_LINKACTIVE |
- IPATH_NOCABLE);
- ipath_hol_down(dd);
- } else { /* active */
- dd->ipath_lastlinkrecov = ipath_snap_cntr(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
- dd->ipath_flags |= IPATH_LINKACTIVE;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKDOWN | IPATH_LINKARMED |
- IPATH_NOCABLE);
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ipath_restart_sdma(dd);
- signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
- /* LED active not handled in chip _f_updown */
- dd->ipath_f_setextled(dd, lstate, ltstate);
- ipath_hol_up(dd);
- }
-
- /*
- * print after we've already done the work, so as not to
- * delay the state changes and notifications, for debugging
- */
- if (lstate == lastlstate)
- ipath_cdbg(LINKVERB, "Unchanged from last: %s "
- "(%x)\n", ib_linkstate(dd, ibcs), ibstate);
- else
- ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
- dd->ipath_unit, ib_linkstate(dd, ibcs),
- ipath_ibcstatus_str[ltstate], ibstate);
- } else { /* down */
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- dd->ipath_flags |= IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKACTIVE |
- IPATH_LINKARMED);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- dd->ipath_lli_counter = 0;
-
- if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
- ipath_cdbg(VERBOSE, "Unit %u link state down "
- "(state 0x%x), from %s\n",
- dd->ipath_unit, lstate,
- ib_linkstate(dd, dd->ipath_lastibcstat));
- else
- ipath_cdbg(LINKVERB, "Unit %u link state changed "
- "to %s (0x%x) from down (%x)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate],
- ibstate, lastlstate);
- }
-
-skip_ibchange:
- dd->ipath_lastibcstat = ibcs;
-done:
- return;
-}
-
-static void handle_supp_msgs(struct ipath_devdata *dd,
- unsigned supp_msgs, char *msg, u32 msgsz)
-{
- /*
- * Print the message unless it's ibc status change only, which
- * happens so often we never want to count it.
- */
- if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
- int iserr;
- ipath_err_t mask;
- iserr = ipath_decode_err(dd, msg, msgsz,
- dd->ipath_lasterror &
- ~INFINIPATH_E_IBSTATUSCHANGED);
-
- mask = INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_PKTERRS | INFINIPATH_E_SDMADISABLED;
-
- /* if we're in debug, then don't mask SDMADISABLED msgs */
- if (ipath_debug & __IPATH_DBG)
- mask &= ~INFINIPATH_E_SDMADISABLED;
-
- if (dd->ipath_lasterror & ~mask)
- ipath_dev_err(dd, "Suppressed %u messages for "
- "fast-repeating errors (%s) (%llx)\n",
- supp_msgs, msg,
- (unsigned long long)
- dd->ipath_lasterror);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal", for some
- * types of processes (mostly benchmarks) that send
- * huge numbers of messages, while not processing
- * them. So only complain about these at debug
- * level.
- */
- if (iserr)
- ipath_dbg("Suppressed %u messages for %s\n",
- supp_msgs, msg);
- else
- ipath_cdbg(ERRPKT,
- "Suppressed %u messages for %s\n",
- supp_msgs, msg);
- }
- }
-}
-
-static unsigned handle_frequent_errors(struct ipath_devdata *dd,
- ipath_err_t errs, char *msg,
- u32 msgsz, int *noprint)
-{
- unsigned long nc;
- static unsigned long nextmsg_time;
- static unsigned nmsgs, supp_msgs;
-
- /*
- * Throttle back "fast" messages to no more than 10 per 5 seconds.
- * This isn't perfect, but it's a reasonable heuristic. If we get
- * more than 10, give a 6x longer delay.
- */
- nc = jiffies;
- if (nmsgs > 10) {
- if (time_before(nc, nextmsg_time)) {
- *noprint = 1;
- if (!supp_msgs++)
- nextmsg_time = nc + HZ * 3;
- } else if (supp_msgs) {
- handle_supp_msgs(dd, supp_msgs, msg, msgsz);
- supp_msgs = 0;
- nmsgs = 0;
- }
- } else if (!nmsgs++ || time_after(nc, nextmsg_time)) {
- nextmsg_time = nc + HZ / 2;
- }
-
- return supp_msgs;
-}
-
-static void handle_sdma_errors(struct ipath_devdata *dd, ipath_err_t errs)
-{
- unsigned long flags;
- int expected;
-
- if (ipath_debug & __IPATH_DBG) {
- char msg[128];
- ipath_decode_err(dd, msg, sizeof msg, errs &
- INFINIPATH_E_SDMAERRS);
- ipath_dbg("errors %lx (%s)\n", (unsigned long)errs, msg);
- }
- if (ipath_debug & __IPATH_VERBDBG) {
- unsigned long tl, hd, status, lengen;
- tl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
- hd = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
- status = ipath_read_kreg64(dd
- , dd->ipath_kregs->kr_senddmastatus);
- lengen = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_senddmalengen);
- ipath_cdbg(VERBOSE, "sdma tl 0x%lx hd 0x%lx status 0x%lx "
- "lengen 0x%lx\n", tl, hd, status, lengen);
- }
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- expected = test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!expected)
- ipath_cancel_sends(dd, 1);
-}
-
-static void handle_sdma_intr(struct ipath_devdata *dd, u64 istat)
-{
- unsigned long flags;
- int expected;
-
- if ((istat & INFINIPATH_I_SDMAINT) &&
- !test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- ipath_sdma_intr(dd);
-
- if (istat & INFINIPATH_I_SDMADISABLED) {
- expected = test_bit(IPATH_SDMA_ABORTING,
- &dd->ipath_sdma_status);
- ipath_dbg("%s SDmaDisabled intr\n",
- expected ? "expected" : "unexpected");
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!expected)
- ipath_cancel_sends(dd, 1);
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- }
-}
-
-static int handle_hdrq_full(struct ipath_devdata *dd)
-{
- int chkerrpkts = 0;
- u32 hd, tl;
- u32 i;
-
- ipath_stats.sps_hdrqfull++;
- for (i = 0; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (i == 0) {
- /*
- * For kernel receive queues, we just want to know
- * if there are packets in the queue that we can
- * process.
- */
- if (pd->port_head != ipath_get_hdrqtail(pd))
- chkerrpkts |= 1 << i;
- continue;
- }
-
- /* Skip if user context is not open */
- if (!pd || !pd->port_cnt)
- continue;
-
- /* Don't report the same point multiple times. */
- if (dd->ipath_flags & IPATH_NODMA_RTAIL)
- tl = ipath_read_ureg32(dd, ur_rcvhdrtail, i);
- else
- tl = ipath_get_rcvhdrtail(pd);
- if (tl == pd->port_lastrcvhdrqtail)
- continue;
-
- hd = ipath_read_ureg32(dd, ur_rcvhdrhead, i);
- if (hd == (tl + 1) || (!hd && tl == dd->ipath_hdrqlast)) {
- pd->port_lastrcvhdrqtail = tl;
- pd->port_hdrqfull++;
- /* flush hdrqfull so that poll() sees it */
- wmb();
- wake_up_interruptible(&pd->port_wait);
- }
- }
-
- return chkerrpkts;
-}
-
-static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
-{
- char msg[128];
- u64 ignore_this_time = 0;
- u64 iserr = 0;
- int chkerrpkts = 0, noprint = 0;
- unsigned supp_msgs;
- int log_idx;
-
- /*
- * don't report errors that are masked, either at init
- * (not set in ipath_errormask), or temporarily (set in
- * ipath_maskederrs)
- */
- errs &= dd->ipath_errormask & ~dd->ipath_maskederrs;
-
- supp_msgs = handle_frequent_errors(dd, errs, msg, (u32)sizeof msg,
- &noprint);
-
- /* do these first, they are most important */
- if (errs & INFINIPATH_E_HARDWARE) {
- /* reuse same msg buf */
- dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
- } else {
- u64 mask;
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) {
- mask = dd->ipath_eep_st_masks[log_idx].errs_to_log;
- if (errs & mask)
- ipath_inc_eeprom_err(dd, log_idx, 1);
- }
- }
-
- if (errs & INFINIPATH_E_SDMAERRS)
- handle_sdma_errors(dd, errs);
-
- if (!noprint && (errs & ~dd->ipath_e_bitsextant))
- ipath_dev_err(dd, "error interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (errs & ~dd->ipath_e_bitsextant));
-
- if (errs & E_SUM_ERRS)
- ignore_this_time = handle_e_sum_errs(dd, errs);
- else if ((errs & E_SUM_LINK_PKTERRS) &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- /*
- * This can happen when SMA is trying to bring the link
- * up, but the IB link changes state at the "wrong" time.
- * The IB logic then complains that the packet isn't
- * valid. We don't want to confuse people, so we just
- * don't print them, except at debug
- */
- ipath_dbg("Ignoring packet errors %llx, because link not "
- "ACTIVE\n", (unsigned long long) errs);
- ignore_this_time = errs & E_SUM_LINK_PKTERRS;
- }
-
- if (supp_msgs == 250000) {
- int s_iserr;
- /*
- * It's not entirely reasonable assuming that the errors set
- * in the last clear period are all responsible for the
- * problem, but the alternative is to assume it's the only
- * ones on this particular interrupt, which also isn't great
- */
- dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
-
- dd->ipath_errormask &= ~dd->ipath_maskederrs;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- s_iserr = ipath_decode_err(dd, msg, sizeof msg,
- dd->ipath_maskederrs);
-
- if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL |
- INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
- ipath_dev_err(dd, "Temporarily disabling "
- "error(s) %llx reporting; too frequent (%s)\n",
- (unsigned long long) dd->ipath_maskederrs,
- msg);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal",
- * for some types of processes (mostly benchmarks)
- * that send huge numbers of messages, while not
- * processing them. So only complain about
- * these at debug level.
- */
- if (s_iserr)
- ipath_dbg("Temporarily disabling reporting "
- "too frequent queue full errors (%s)\n",
- msg);
- else
- ipath_cdbg(ERRPKT,
- "Temporarily disabling reporting too"
- " frequent packet errors (%s)\n",
- msg);
- }
-
- /*
- * Re-enable the masked errors after around 3 minutes. in
- * ipath_get_faststats(). If we have a series of fast
- * repeating but different errors, the interval will keep
- * stretching out, but that's OK, as that's pretty
- * catastrophic.
- */
- dd->ipath_unmasktime = jiffies + HZ * 180;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
- if (ignore_this_time)
- errs &= ~ignore_this_time;
- if (errs & ~dd->ipath_lasterror) {
- errs &= ~dd->ipath_lasterror;
- /* never suppress duplicate hwerrors or ibstatuschange */
- dd->ipath_lasterror |= errs &
- ~(INFINIPATH_E_HARDWARE |
- INFINIPATH_E_IBSTATUSCHANGED);
- }
-
- if (errs & INFINIPATH_E_SENDSPECIALTRIGGER) {
- dd->ipath_spectriggerhit++;
- ipath_dbg("%lu special trigger hits\n",
- dd->ipath_spectriggerhit);
- }
-
- /* likely due to cancel; so suppress message unless verbose */
- if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
- time_after(dd->ipath_lastcancel, jiffies)) {
- /* armlaunch takes precedence; it often causes both. */
- ipath_cdbg(VERBOSE,
- "Suppressed %s error (%llx) after sendbuf cancel\n",
- (errs & INFINIPATH_E_SPIOARMLAUNCH) ?
- "armlaunch" : "sendpktlen", (unsigned long long)errs);
- errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
- }
-
- if (!errs)
- return 0;
-
- if (!noprint) {
- ipath_err_t mask;
- /*
- * The ones we mask off are handled specially below
- * or above. Also mask SDMADISABLED by default as it
- * is too chatty.
- */
- mask = INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_HARDWARE | INFINIPATH_E_SDMADISABLED;
-
- /* if we're in debug, then don't mask SDMADISABLED msgs */
- if (ipath_debug & __IPATH_DBG)
- mask &= ~INFINIPATH_E_SDMADISABLED;
-
- ipath_decode_err(dd, msg, sizeof msg, errs & ~mask);
- } else
- /* so we don't need if (!noprint) at strlcat's below */
- *msg = 0;
-
- if (errs & E_SUM_PKTERRS) {
- ipath_stats.sps_pkterrs++;
- chkerrpkts = 1;
- }
- if (errs & E_SUM_ERRS)
- ipath_stats.sps_errs++;
-
- if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
- ipath_stats.sps_crcerrs++;
- chkerrpkts = 1;
- }
- iserr = errs & ~(E_SUM_PKTERRS | INFINIPATH_E_PKTERRS);
-
-
- /*
- * We don't want to print these two as they happen, or we can make
- * the situation even worse, because it takes so long to print
- * messages to serial consoles. Kernel ports get printed from
- * fast_stats, no more than every 5 seconds, user ports get printed
- * on close
- */
- if (errs & INFINIPATH_E_RRCVHDRFULL)
- chkerrpkts |= handle_hdrq_full(dd);
- if (errs & INFINIPATH_E_RRCVEGRFULL) {
- struct ipath_portdata *pd = dd->ipath_pd[0];
-
- /*
- * since this is of less importance and not likely to
- * happen without also getting hdrfull, only count
- * occurrences; don't check each port (or even the kernel
- * vs user)
- */
- ipath_stats.sps_etidfull++;
- if (pd->port_head != ipath_get_hdrqtail(pd))
- chkerrpkts |= 1;
- }
-
- /*
- * do this before IBSTATUSCHANGED, in case both bits set in a single
- * interrupt; we want the STATUSCHANGE to "win", so we do our
- * internal copy of state machine correctly
- */
- if (errs & INFINIPATH_E_RIBLOSTLINK) {
- /*
- * force through block below
- */
- errs |= INFINIPATH_E_IBSTATUSCHANGED;
- ipath_stats.sps_iblink++;
- dd->ipath_flags |= IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKARMED | IPATH_LINKACTIVE);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
-
- ipath_dbg("Lost link, link now down (%s)\n",
- ipath_ibcstatus_str[ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_ibcstatus) & 0xf]);
- }
- if (errs & INFINIPATH_E_IBSTATUSCHANGED)
- handle_e_ibstatuschanged(dd, errs);
-
- if (errs & INFINIPATH_E_RESET) {
- if (!noprint)
- ipath_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
- dd->ipath_flags &= ~IPATH_INITTED; /* needs re-init */
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
- }
-
- if (!noprint && *msg) {
- if (iserr)
- ipath_dev_err(dd, "%s error\n", msg);
- }
- if (dd->ipath_state_wanted & dd->ipath_flags) {
- ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
- "waking\n", dd->ipath_state_wanted,
- dd->ipath_flags);
- wake_up_interruptible(&ipath_state_wait);
- }
-
- return chkerrpkts;
-}
-
-/*
- * try to cleanup as much as possible for anything that might have gone
- * wrong while in freeze mode, such as pio buffers being written by user
- * processes (causing armlaunch), send errors due to going into freeze mode,
- * etc., and try to avoid causing extra interrupts while doing so.
- * Forcibly update the in-memory pioavail register copies after cleanup
- * because the chip won't do it while in freeze mode (the register values
- * themselves are kept correct).
- * Make sure that we don't lose any important interrupts by using the chip
- * feature that says that writing 0 to a bit in *clear that is set in
- * *status will cause an interrupt to be generated again (if allowed by
- * the *mask value).
- */
-void ipath_clear_freeze(struct ipath_devdata *dd)
-{
- /* disable error interrupts, to avoid confusion */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
-
- /* also disable interrupts; errormask is sometimes overwriten */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
-
- ipath_cancel_sends(dd, 1);
-
- /* clear the freeze, and be sure chip saw it */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- /* force in-memory update now we are out of freeze */
- ipath_force_pio_avail_update(dd);
-
- /*
- * force new interrupt if any hwerr, error or interrupt bits are
- * still set, and clear "safe" send packet errors related to freeze
- * and cancelling sends. Re-enable error interrupts before possible
- * force of re-interrupt on pending interrupts.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- E_SPKT_ERRS_IGNORE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, -1LL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
-}
-
-
-/* this is separate to allow for better optimization of ipath_intr() */
-
-static noinline void ipath_bad_intr(struct ipath_devdata *dd, u32 *unexpectp)
-{
- /*
- * sometimes happen during driver init and unload, don't want
- * to process any interrupts at that point
- */
-
- /* this is just a bandaid, not a fix, if something goes badly
- * wrong */
- if (++*unexpectp > 100) {
- if (++*unexpectp > 105) {
- /*
- * ok, we must be taking somebody else's interrupts,
- * due to a messed up mptable and/or PIRQ table, so
- * unregister the interrupt. We've seen this during
- * linuxbios development work, and it may happen in
- * the future again.
- */
- if (dd->pcidev && dd->ipath_irq) {
- ipath_dev_err(dd, "Now %u unexpected "
- "interrupts, unregistering "
- "interrupt handler\n",
- *unexpectp);
- ipath_dbg("free_irq of irq %d\n",
- dd->ipath_irq);
- dd->ipath_f_free_irq(dd);
- }
- }
- if (ipath_read_ireg(dd, dd->ipath_kregs->kr_intmask)) {
- ipath_dev_err(dd, "%u unexpected interrupts, "
- "disabling interrupts completely\n",
- *unexpectp);
- /*
- * disable all interrupts, something is very wrong
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
- 0ULL);
- }
- } else if (*unexpectp > 1)
- ipath_dbg("Interrupt when not ready, should not happen, "
- "ignoring\n");
-}
-
-static noinline void ipath_bad_regread(struct ipath_devdata *dd)
-{
- static int allbits;
-
- /* separate routine, for better optimization of ipath_intr() */
-
- /*
- * We print the message and disable interrupts, in hope of
- * having a better chance of debugging the problem.
- */
- ipath_dev_err(dd,
- "Read of interrupt status failed (all bits set)\n");
- if (allbits++) {
- /* disable all interrupts, something is very wrong */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- if (allbits == 2) {
- ipath_dev_err(dd, "Still bad interrupt status, "
- "unregistering interrupt\n");
- dd->ipath_f_free_irq(dd);
- } else if (allbits > 2) {
- if ((allbits % 10000) == 0)
- printk(".");
- } else
- ipath_dev_err(dd, "Disabling interrupts, "
- "multiple errors\n");
- }
-}
-
-static void handle_layer_pioavail(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int ret;
-
- ret = ipath_ib_piobufavail(dd->verbs_dev);
- if (ret > 0)
- goto set;
-
- return;
-set:
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-}
-
-/*
- * Handle receive interrupts for user ports; this means a user
- * process was waiting for a packet to arrive, and didn't want
- * to poll
- */
-static void handle_urcv(struct ipath_devdata *dd, u64 istat)
-{
- u64 portr;
- int i;
- int rcvdint = 0;
-
- /*
- * test_and_clear_bit(IPATH_PORT_WAITING_RCV) and
- * test_and_clear_bit(IPATH_PORT_WAITING_URG) below
- * would both like timely updates of the bits so that
- * we don't pass them by unnecessarily. the rmb()
- * here ensures that we see them promptly -- the
- * corresponding wmb()'s are in ipath_poll_urgent()
- * and ipath_poll_next()...
- */
- rmb();
- portr = ((istat >> dd->ipath_i_rcvavail_shift) &
- dd->ipath_i_rcvavail_mask) |
- ((istat >> dd->ipath_i_rcvurg_shift) &
- dd->ipath_i_rcvurg_mask);
- for (i = 1; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (portr & (1 << i) && pd && pd->port_cnt) {
- if (test_and_clear_bit(IPATH_PORT_WAITING_RCV,
- &pd->port_flag)) {
- clear_bit(i + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
- wake_up_interruptible(&pd->port_wait);
- rcvdint = 1;
- } else if (test_and_clear_bit(IPATH_PORT_WAITING_URG,
- &pd->port_flag)) {
- pd->port_urgent++;
- wake_up_interruptible(&pd->port_wait);
- }
- }
- }
- if (rcvdint) {
- /* only want to take one interrupt, so turn off the rcv
- * interrupt for all the ports that we set the rcv_waiting
- * (but never for kernel port)
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- }
-}
-
-irqreturn_t ipath_intr(int irq, void *data)
-{
- struct ipath_devdata *dd = data;
- u64 istat, chk0rcv = 0;
- ipath_err_t estat = 0;
- irqreturn_t ret;
- static unsigned unexpected = 0;
- u64 kportrbits;
-
- ipath_stats.sps_ints++;
-
- if (dd->ipath_int_counter != (u32) -1)
- dd->ipath_int_counter++;
-
- if (!(dd->ipath_flags & IPATH_PRESENT)) {
- /*
- * This return value is not great, but we do not want the
- * interrupt core code to remove our interrupt handler
- * because we don't appear to be handling an interrupt
- * during a chip reset.
- */
- return IRQ_HANDLED;
- }
-
- /*
- * this needs to be flags&initted, not statusp, so we keep
- * taking interrupts even after link goes down, etc.
- * Also, we *must* clear the interrupt at some point, or we won't
- * take it again, which can be real bad for errors, etc...
- */
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- ipath_bad_intr(dd, &unexpected);
- ret = IRQ_NONE;
- goto bail;
- }
-
- istat = ipath_read_ireg(dd, dd->ipath_kregs->kr_intstatus);
-
- if (unlikely(!istat)) {
- ipath_stats.sps_nullintr++;
- ret = IRQ_NONE; /* not our interrupt, or already handled */
- goto bail;
- }
- if (unlikely(istat == -1)) {
- ipath_bad_regread(dd);
- /* don't know if it was our interrupt or not */
- ret = IRQ_NONE;
- goto bail;
- }
-
- if (unexpected)
- unexpected = 0;
-
- if (unlikely(istat & ~dd->ipath_i_bitsextant))
- ipath_dev_err(dd,
- "interrupt with unknown interrupts %Lx set\n",
- (unsigned long long)
- istat & ~dd->ipath_i_bitsextant);
- else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
- ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n",
- (unsigned long long) istat);
-
- if (istat & INFINIPATH_I_ERROR) {
- ipath_stats.sps_errints++;
- estat = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_errorstatus);
- if (!estat)
- dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
- "but no error bits set!\n",
- (unsigned long long) istat);
- else if (estat == -1LL)
- /*
- * should we try clearing all, or hope next read
- * works?
- */
- ipath_dev_err(dd, "Read of error status failed "
- "(all bits set); ignoring\n");
- else
- chk0rcv |= handle_errors(dd, estat);
- }
-
- if (istat & INFINIPATH_I_GPIO) {
- /*
- * GPIO interrupts fall in two broad classes:
- * GPIO_2 indicates (on some HT4xx boards) that a packet
- * has arrived for Port 0. Checking for this
- * is controlled by flag IPATH_GPIO_INTR.
- * GPIO_3..5 on IBA6120 Rev2 and IBA6110 Rev4 chips indicate
- * errors that we need to count. Checking for this
- * is controlled by flag IPATH_GPIO_ERRINTRS.
- */
- u32 gpiostatus;
- u32 to_clear = 0;
-
- gpiostatus = ipath_read_kreg32(
- dd, dd->ipath_kregs->kr_gpio_status);
- /* First the error-counter case. */
- if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
- (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
- /* want to clear the bits we see asserted. */
- to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
-
- /*
- * Count appropriately, clear bits out of our copy,
- * as they have been "handled".
- */
- if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
- ipath_dbg("FlowCtl on UnsupVL\n");
- dd->ipath_rxfc_unsupvl_errs++;
- }
- if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
- ipath_dbg("Overrun Threshold exceeded\n");
- dd->ipath_overrun_thresh_errs++;
- }
- if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
- ipath_dbg("Local Link Integrity error\n");
- dd->ipath_lli_errs++;
- }
- gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
- }
- /* Now the Port0 Receive case */
- if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
- (dd->ipath_flags & IPATH_GPIO_INTR)) {
- /*
- * GPIO status bit 2 is set, and we expected it.
- * clear it and indicate in p0bits.
- * This probably only happens if a Port0 pkt
- * arrives at _just_ the wrong time, and we
- * handle that by seting chk0rcv;
- */
- to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
- gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
- chk0rcv = 1;
- }
- if (gpiostatus) {
- /*
- * Some unexpected bits remain. If they could have
- * caused the interrupt, complain and clear.
- * To avoid repetition of this condition, also clear
- * the mask. It is almost certainly due to error.
- */
- const u32 mask = (u32) dd->ipath_gpio_mask;
-
- if (mask & gpiostatus) {
- ipath_dbg("Unexpected GPIO IRQ bits %x\n",
- gpiostatus & mask);
- to_clear |= (gpiostatus & mask);
- dd->ipath_gpio_mask &= ~(gpiostatus & mask);
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
- }
- if (to_clear) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- (u64) to_clear);
- }
- }
-
- /*
- * Clear the interrupt bits we found set, unless they are receive
- * related, in which case we already cleared them above, and don't
- * want to clear them again, because we might lose an interrupt.
- * Clear it early, so we "know" know the chip will have seen this by
- * the time we process the queue, and will re-interrupt if necessary.
- * The processor itself won't take the interrupt again until we return.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
-
- /*
- * Handle kernel receive queues before checking for pio buffers
- * available since receives can overflow; piobuf waiters can afford
- * a few extra cycles, since they were waiting anyway, and user's
- * waiting for receive are at the bottom.
- */
- kportrbits = (1ULL << dd->ipath_i_rcvavail_shift) |
- (1ULL << dd->ipath_i_rcvurg_shift);
- if (chk0rcv || (istat & kportrbits)) {
- istat &= ~kportrbits;
- ipath_kreceive(dd->ipath_pd[0]);
- }
-
- if (istat & ((dd->ipath_i_rcvavail_mask << dd->ipath_i_rcvavail_shift) |
- (dd->ipath_i_rcvurg_mask << dd->ipath_i_rcvurg_shift)))
- handle_urcv(dd, istat);
-
- if (istat & (INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED))
- handle_sdma_intr(dd, istat);
-
- if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* always process; sdma verbs uses PIO for acks and VL15 */
- handle_layer_pioavail(dd);
- }
-
- ret = IRQ_HANDLED;
-
-bail:
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_kernel.h b/drivers/staging/rdma/ipath/ipath_kernel.h
deleted file mode 100644
index 66c934a..0000000
--- a/drivers/staging/rdma/ipath/ipath_kernel.h
+++ /dev/null
@@ -1,1374 +0,0 @@
-#ifndef _IPATH_KERNEL_H
-#define _IPATH_KERNEL_H
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This header file is the base header file for infinipath kernel code
- * ipath_user.h serves a similar purpose for user code.
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/scatterlist.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_common.h"
-#include "ipath_debug.h"
-#include "ipath_registers.h"
-
-/* only s/w major version of InfiniPath we can handle */
-#define IPATH_CHIP_VERS_MAJ 2U
-
-/* don't care about this except printing */
-#define IPATH_CHIP_VERS_MIN 0U
-
-/* temporary, maybe always */
-extern struct infinipath_stats ipath_stats;
-
-#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
-/*
- * First-cut critierion for "device is active" is
- * two thousand dwords combined Tx, Rx traffic per
- * 5-second interval. SMA packets are 64 dwords,
- * and occur "a few per second", presumably each way.
- */
-#define IPATH_TRAFFIC_ACTIVE_THRESHOLD (2000)
-/*
- * Struct used to indicate which errors are logged in each of the
- * error-counters that are logged to EEPROM. A counter is incremented
- * _once_ (saturating at 255) for each event with any bits set in
- * the error or hwerror register masks below.
- */
-#define IPATH_EEP_LOG_CNT (4)
-struct ipath_eep_log_mask {
- u64 errs_to_log;
- u64 hwerrs_to_log;
-};
-
-struct ipath_portdata {
- void **port_rcvegrbuf;
- dma_addr_t *port_rcvegrbuf_phys;
- /* rcvhdrq base, needs mmap before useful */
- void *port_rcvhdrq;
- /* kernel virtual address where hdrqtail is updated */
- void *port_rcvhdrtail_kvaddr;
- /*
- * temp buffer for expected send setup, allocated at open, instead
- * of each setup call
- */
- void *port_tid_pg_list;
- /* when waiting for rcv or pioavail */
- wait_queue_head_t port_wait;
- /*
- * rcvegr bufs base, physical, must fit
- * in 44 bits so 32 bit programs mmap64 44 bit works)
- */
- dma_addr_t port_rcvegr_phys;
- /* mmap of hdrq, must fit in 44 bits */
- dma_addr_t port_rcvhdrq_phys;
- dma_addr_t port_rcvhdrqtailaddr_phys;
- /*
- * number of opens (including slave subports) on this instance
- * (ignoring forks, dup, etc. for now)
- */
- int port_cnt;
- /*
- * how much space to leave at start of eager TID entries for
- * protocol use, on each TID
- */
- /* instead of calculating it */
- unsigned port_port;
- /* non-zero if port is being shared. */
- u16 port_subport_cnt;
- /* non-zero if port is being shared. */
- u16 port_subport_id;
- /* number of pio bufs for this port (all procs, if shared) */
- u32 port_piocnt;
- /* first pio buffer for this port */
- u32 port_pio_base;
- /* chip offset of PIO buffers for this port */
- u32 port_piobufs;
- /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
- u32 port_rcvegrbuf_chunks;
- /* how many egrbufs per chunk */
- u32 port_rcvegrbufs_perchunk;
- /* order for port_rcvegrbuf_pages */
- size_t port_rcvegrbuf_size;
- /* rcvhdrq size (for freeing) */
- size_t port_rcvhdrq_size;
- /* next expected TID to check when looking for free */
- u32 port_tidcursor;
- /* next expected TID to check */
- unsigned long port_flag;
- /* what happened */
- unsigned long int_flag;
- /* WAIT_RCV that timed out, no interrupt */
- u32 port_rcvwait_to;
- /* WAIT_PIO that timed out, no interrupt */
- u32 port_piowait_to;
- /* WAIT_RCV already happened, no wait */
- u32 port_rcvnowait;
- /* WAIT_PIO already happened, no wait */
- u32 port_pionowait;
- /* total number of rcvhdrqfull errors */
- u32 port_hdrqfull;
- /*
- * Used to suppress multiple instances of same
- * port staying stuck at same point.
- */
- u32 port_lastrcvhdrqtail;
- /* saved total number of rcvhdrqfull errors for poll edge trigger */
- u32 port_hdrqfull_poll;
- /* total number of polled urgent packets */
- u32 port_urgent;
- /* saved total number of polled urgent packets for poll edge trigger */
- u32 port_urgent_poll;
- /* pid of process using this port */
- struct pid *port_pid;
- struct pid *port_subpid[INFINIPATH_MAX_SUBPORT];
- /* same size as task_struct .comm[] */
- char port_comm[TASK_COMM_LEN];
- /* pkeys set by this use of this port */
- u16 port_pkeys[4];
- /* so file ops can get at unit */
- struct ipath_devdata *port_dd;
- /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
- void *subport_uregbase;
- /* An array of pages for the eager receive buffers * N */
- void *subport_rcvegrbuf;
- /* An array of pages for the eager header queue entries * N */
- void *subport_rcvhdr_base;
- /* The version of the library which opened this port */
- u32 userversion;
- /* Bitmask of active slaves */
- u32 active_slaves;
- /* Type of packets or conditions we want to poll for */
- u16 poll_type;
- /* port rcvhdrq head offset */
- u32 port_head;
- /* receive packet sequence counter */
- u32 port_seq_cnt;
-};
-
-struct sk_buff;
-struct ipath_sge_state;
-struct ipath_verbs_txreq;
-
-/*
- * control information for layered drivers
- */
-struct _ipath_layer {
- void *l_arg;
-};
-
-struct ipath_skbinfo {
- struct sk_buff *skb;
- dma_addr_t phys;
-};
-
-struct ipath_sdma_txreq {
- int flags;
- int sg_count;
- union {
- struct scatterlist *sg;
- void *map_addr;
- };
- void (*callback)(void *, int);
- void *callback_cookie;
- int callback_status;
- u16 start_idx; /* sdma private */
- u16 next_descq_idx; /* sdma private */
- struct list_head list; /* sdma private */
-};
-
-struct ipath_sdma_desc {
- __le64 qw[2];
-};
-
-#define IPATH_SDMA_TXREQ_F_USELARGEBUF 0x1
-#define IPATH_SDMA_TXREQ_F_HEADTOHOST 0x2
-#define IPATH_SDMA_TXREQ_F_INTREQ 0x4
-#define IPATH_SDMA_TXREQ_F_FREEBUF 0x8
-#define IPATH_SDMA_TXREQ_F_FREEDESC 0x10
-#define IPATH_SDMA_TXREQ_F_VL15 0x20
-
-#define IPATH_SDMA_TXREQ_S_OK 0
-#define IPATH_SDMA_TXREQ_S_SENDERROR 1
-#define IPATH_SDMA_TXREQ_S_ABORTED 2
-#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
-
-#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
-#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
-#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
-#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
-
-/* max dwords in small buffer packet */
-#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
-
-/*
- * Possible IB config parameters for ipath_f_get/set_ib_cfg()
- */
-#define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
-#define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
-#define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
-#define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
-#define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
-#define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
-#define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
-#define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
-#define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
-#define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
-#define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
-
-
-struct ipath_devdata {
- struct list_head ipath_list;
-
- struct ipath_kregs const *ipath_kregs;
- struct ipath_cregs const *ipath_cregs;
-
- /* mem-mapped pointer to base of chip regs */
- u64 __iomem *ipath_kregbase;
- /* end of mem-mapped chip space; range checking */
- u64 __iomem *ipath_kregend;
- /* physical address of chip for io_remap, etc. */
- unsigned long ipath_physaddr;
- /* base of memory alloced for ipath_kregbase, for free */
- u64 *ipath_kregalloc;
- /* ipath_cfgports pointers */
- struct ipath_portdata **ipath_pd;
- /* sk_buffs used by port 0 eager receive queue */
- struct ipath_skbinfo *ipath_port0_skbinfo;
- /* kvirt address of 1st 2k pio buffer */
- void __iomem *ipath_pio2kbase;
- /* kvirt address of 1st 4k pio buffer */
- void __iomem *ipath_pio4kbase;
- /*
- * points to area where PIOavail registers will be DMA'ed.
- * Has to be on a page of it's own, because the page will be
- * mapped into user program space. This copy is *ONLY* ever
- * written by DMA, not by the driver! Need a copy per device
- * when we get to multiple devices
- */
- volatile __le64 *ipath_pioavailregs_dma;
- /* physical address where updates occur */
- dma_addr_t ipath_pioavailregs_phys;
- struct _ipath_layer ipath_layer;
- /* setup intr */
- int (*ipath_f_intrsetup)(struct ipath_devdata *);
- /* fallback to alternate interrupt type if possible */
- int (*ipath_f_intr_fallback)(struct ipath_devdata *);
- /* setup on-chip bus config */
- int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
- /* hard reset chip */
- int (*ipath_f_reset)(struct ipath_devdata *);
- int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
- size_t);
- void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
- void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
- size_t);
- void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
- int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
- int (*ipath_f_early_init)(struct ipath_devdata *);
- void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
- void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
- u32, unsigned long);
- void (*ipath_f_tidtemplate)(struct ipath_devdata *);
- void (*ipath_f_cleanup)(struct ipath_devdata *);
- void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
- /* fill out chip-specific fields */
- int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
- /* free irq */
- void (*ipath_f_free_irq)(struct ipath_devdata *);
- struct ipath_message_header *(*ipath_f_get_msgheader)
- (struct ipath_devdata *, __le32 *);
- void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
- int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int);
- int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32);
- void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16);
- void (*ipath_f_read_counters)(struct ipath_devdata *,
- struct infinipath_counters *);
- void (*ipath_f_xgxs_reset)(struct ipath_devdata *);
- /* per chip actions needed for IB Link up/down changes */
- int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
-
- unsigned ipath_lastegr_idx;
- struct ipath_ibdev *verbs_dev;
- struct timer_list verbs_timer;
- /* total dwords sent (summed from counter) */
- u64 ipath_sword;
- /* total dwords rcvd (summed from counter) */
- u64 ipath_rword;
- /* total packets sent (summed from counter) */
- u64 ipath_spkts;
- /* total packets rcvd (summed from counter) */
- u64 ipath_rpkts;
- /* ipath_statusp initially points to this. */
- u64 _ipath_status;
- /* GUID for this interface, in network order */
- __be64 ipath_guid;
- /*
- * aggregrate of error bits reported since last cleared, for
- * limiting of error reporting
- */
- ipath_err_t ipath_lasterror;
- /*
- * aggregrate of error bits reported since last cleared, for
- * limiting of hwerror reporting
- */
- ipath_err_t ipath_lasthwerror;
- /* errors masked because they occur too fast */
- ipath_err_t ipath_maskederrs;
- u64 ipath_lastlinkrecov; /* link recoveries at last ACTIVE */
- /* these 5 fields are used to establish deltas for IB Symbol
- * errors and linkrecovery errors. They can be reported on
- * some chips during link negotiation prior to INIT, and with
- * DDR when faking DDR negotiations with non-IBTA switches.
- * The chip counters are adjusted at driver unload if there is
- * a non-zero delta.
- */
- u64 ibdeltainprog;
- u64 ibsymdelta;
- u64 ibsymsnap;
- u64 iblnkerrdelta;
- u64 iblnkerrsnap;
-
- /* time in jiffies at which to re-enable maskederrs */
- unsigned long ipath_unmasktime;
- /* count of egrfull errors, combined for all ports */
- u64 ipath_last_tidfull;
- /* for ipath_qcheck() */
- u64 ipath_lastport0rcv_cnt;
- /* template for writing TIDs */
- u64 ipath_tidtemplate;
- /* value to write to free TIDs */
- u64 ipath_tidinvalid;
- /* IBA6120 rcv interrupt setup */
- u64 ipath_rhdrhead_intr_off;
-
- /* size of memory at ipath_kregbase */
- u32 ipath_kregsize;
- /* number of registers used for pioavail */
- u32 ipath_pioavregs;
- /* IPATH_POLL, etc. */
- u32 ipath_flags;
- /* ipath_flags driver is waiting for */
- u32 ipath_state_wanted;
- /* last buffer for user use, first buf for kernel use is this
- * index. */
- u32 ipath_lastport_piobuf;
- /* is a stats timer active */
- u32 ipath_stats_timer_active;
- /* number of interrupts for this device -- saturates... */
- u32 ipath_int_counter;
- /* dwords sent read from counter */
- u32 ipath_lastsword;
- /* dwords received read from counter */
- u32 ipath_lastrword;
- /* sent packets read from counter */
- u32 ipath_lastspkts;
- /* received packets read from counter */
- u32 ipath_lastrpkts;
- /* pio bufs allocated per port */
- u32 ipath_pbufsport;
- /* if remainder on bufs/port, ports < extrabuf get 1 extra */
- u32 ipath_ports_extrabuf;
- u32 ipath_pioupd_thresh; /* update threshold, some chips */
- /*
- * number of ports configured as max; zero is set to number chip
- * supports, less gives more pio bufs/port, etc.
- */
- u32 ipath_cfgports;
- /* count of port 0 hdrqfull errors */
- u32 ipath_p0_hdrqfull;
- /* port 0 number of receive eager buffers */
- u32 ipath_p0_rcvegrcnt;
-
- /*
- * index of last piobuffer we used. Speeds up searching, by
- * starting at this point. Doesn't matter if multiple cpu's use and
- * update, last updater is only write that matters. Whenever it
- * wraps, we update shadow copies. Need a copy per device when we
- * get to multiple devices
- */
- u32 ipath_lastpioindex;
- u32 ipath_lastpioindexl;
- /* max length of freezemsg */
- u32 ipath_freezelen;
- /*
- * consecutive times we wanted a PIO buffer but were unable to
- * get one
- */
- u32 ipath_consec_nopiobuf;
- /*
- * hint that we should update ipath_pioavailshadow before
- * looking for a PIO buffer
- */
- u32 ipath_upd_pio_shadow;
- /* so we can rewrite it after a chip reset */
- u32 ipath_pcibar0;
- /* so we can rewrite it after a chip reset */
- u32 ipath_pcibar1;
- u32 ipath_x1_fix_tries;
- u32 ipath_autoneg_tries;
- u32 serdes_first_init_done;
-
- struct ipath_relock {
- atomic_t ipath_relock_timer_active;
- struct timer_list ipath_relock_timer;
- unsigned int ipath_relock_interval; /* in jiffies */
- } ipath_relock_singleton;
-
- /* interrupt number */
- int ipath_irq;
- /* HT/PCI Vendor ID (here for NodeInfo) */
- u16 ipath_vendorid;
- /* HT/PCI Device ID (here for NodeInfo) */
- u16 ipath_deviceid;
- /* offset in HT config space of slave/primary interface block */
- u8 ipath_ht_slave_off;
- /* for write combining settings */
- int wc_cookie;
- /* ref count for each pkey */
- atomic_t ipath_pkeyrefs[4];
- /* shadow copy of struct page *'s for exp tid pages */
- struct page **ipath_pageshadow;
- /* shadow copy of dma handles for exp tid pages */
- dma_addr_t *ipath_physshadow;
- u64 __iomem *ipath_egrtidbase;
- /* lock to workaround chip bug 9437 and others */
- spinlock_t ipath_kernel_tid_lock;
- spinlock_t ipath_user_tid_lock;
- spinlock_t ipath_sendctrl_lock;
- /* around ipath_pd and (user ports) port_cnt use (intr vs free) */
- spinlock_t ipath_uctxt_lock;
-
- /*
- * IPATH_STATUS_*,
- * this address is mapped readonly into user processes so they can
- * get status cheaply, whenever they want.
- */
- u64 *ipath_statusp;
- /* freeze msg if hw error put chip in freeze */
- char *ipath_freezemsg;
- /* pci access data structure */
- struct pci_dev *pcidev;
- struct cdev *user_cdev;
- struct cdev *diag_cdev;
- struct device *user_dev;
- struct device *diag_dev;
- /* timer used to prevent stats overflow, error throttling, etc. */
- struct timer_list ipath_stats_timer;
- /* timer to verify interrupts work, and fallback if possible */
- struct timer_list ipath_intrchk_timer;
- void *ipath_dummy_hdrq; /* used after port close */
- dma_addr_t ipath_dummy_hdrq_phys;
-
- /* SendDMA related entries */
- spinlock_t ipath_sdma_lock;
- unsigned long ipath_sdma_status;
- unsigned long ipath_sdma_abort_jiffies;
- unsigned long ipath_sdma_abort_intr_timeout;
- unsigned long ipath_sdma_buf_jiffies;
- struct ipath_sdma_desc *ipath_sdma_descq;
- u64 ipath_sdma_descq_added;
- u64 ipath_sdma_descq_removed;
- int ipath_sdma_desc_nreserved;
- u16 ipath_sdma_descq_cnt;
- u16 ipath_sdma_descq_tail;
- u16 ipath_sdma_descq_head;
- u16 ipath_sdma_next_intr;
- u16 ipath_sdma_reset_wait;
- u8 ipath_sdma_generation;
- struct tasklet_struct ipath_sdma_abort_task;
- struct tasklet_struct ipath_sdma_notify_task;
- struct list_head ipath_sdma_activelist;
- struct list_head ipath_sdma_notifylist;
- atomic_t ipath_sdma_vl15_count;
- struct timer_list ipath_sdma_vl15_timer;
-
- dma_addr_t ipath_sdma_descq_phys;
- volatile __le64 *ipath_sdma_head_dma;
- dma_addr_t ipath_sdma_head_phys;
-
- unsigned long ipath_ureg_align; /* user register alignment */
-
- struct delayed_work ipath_autoneg_work;
- wait_queue_head_t ipath_autoneg_wait;
-
- /* HoL blocking / user app forward-progress state */
- unsigned ipath_hol_state;
- unsigned ipath_hol_next;
- struct timer_list ipath_hol_timer;
-
- /*
- * Shadow copies of registers; size indicates read access size.
- * Most of them are readonly, but some are write-only register,
- * where we manipulate the bits in the shadow copy, and then write
- * the shadow copy to infinipath.
- *
- * We deliberately make most of these 32 bits, since they have
- * restricted range. For any that we read, we won't to generate 32
- * bit accesses, since Opteron will generate 2 separate 32 bit HT
- * transactions for a 64 bit read, and we want to avoid unnecessary
- * HT transactions.
- */
-
- /* This is the 64 bit group */
-
- /*
- * shadow of pioavail, check to be sure it's large enough at
- * init time.
- */
- unsigned long ipath_pioavailshadow[8];
- /* bitmap of send buffers available for the kernel to use with PIO. */
- unsigned long ipath_pioavailkernel[8];
- /* shadow of kr_gpio_out, for rmw ops */
- u64 ipath_gpio_out;
- /* shadow the gpio mask register */
- u64 ipath_gpio_mask;
- /* shadow the gpio output enable, etc... */
- u64 ipath_extctrl;
- /* kr_revision shadow */
- u64 ipath_revision;
- /*
- * shadow of ibcctrl, for interrupt handling of link changes,
- * etc.
- */
- u64 ipath_ibcctrl;
- /*
- * last ibcstatus, to suppress "duplicate" status change messages,
- * mostly from 2 to 3
- */
- u64 ipath_lastibcstat;
- /* hwerrmask shadow */
- ipath_err_t ipath_hwerrmask;
- ipath_err_t ipath_errormask; /* errormask shadow */
- /* interrupt config reg shadow */
- u64 ipath_intconfig;
- /* kr_sendpiobufbase value */
- u64 ipath_piobufbase;
- /* kr_ibcddrctrl shadow */
- u64 ipath_ibcddrctrl;
-
- /* these are the "32 bit" regs */
-
- /*
- * number of GUIDs in the flash for this interface; may need some
- * rethinking for setting on other ifaces
- */
- u32 ipath_nguid;
- /*
- * the following two are 32-bit bitmasks, but {test,clear,set}_bit
- * all expect bit fields to be "unsigned long"
- */
- /* shadow kr_rcvctrl */
- unsigned long ipath_rcvctrl;
- /* shadow kr_sendctrl */
- unsigned long ipath_sendctrl;
- /* to not count armlaunch after cancel */
- unsigned long ipath_lastcancel;
- /* count cases where special trigger was needed (double write) */
- unsigned long ipath_spectriggerhit;
-
- /* value we put in kr_rcvhdrcnt */
- u32 ipath_rcvhdrcnt;
- /* value we put in kr_rcvhdrsize */
- u32 ipath_rcvhdrsize;
- /* value we put in kr_rcvhdrentsize */
- u32 ipath_rcvhdrentsize;
- /* offset of last entry in rcvhdrq */
- u32 ipath_hdrqlast;
- /* kr_portcnt value */
- u32 ipath_portcnt;
- /* kr_pagealign value */
- u32 ipath_palign;
- /* number of "2KB" PIO buffers */
- u32 ipath_piobcnt2k;
- /* size in bytes of "2KB" PIO buffers */
- u32 ipath_piosize2k;
- /* number of "4KB" PIO buffers */
- u32 ipath_piobcnt4k;
- /* size in bytes of "4KB" PIO buffers */
- u32 ipath_piosize4k;
- u32 ipath_pioreserved; /* reserved special-inkernel; */
- /* kr_rcvegrbase value */
- u32 ipath_rcvegrbase;
- /* kr_rcvegrcnt value */
- u32 ipath_rcvegrcnt;
- /* kr_rcvtidbase value */
- u32 ipath_rcvtidbase;
- /* kr_rcvtidcnt value */
- u32 ipath_rcvtidcnt;
- /* kr_sendregbase */
- u32 ipath_sregbase;
- /* kr_userregbase */
- u32 ipath_uregbase;
- /* kr_counterregbase */
- u32 ipath_cregbase;
- /* shadow the control register contents */
- u32 ipath_control;
- /* PCI revision register (HTC rev on FPGA) */
- u32 ipath_pcirev;
-
- /* chip address space used by 4k pio buffers */
- u32 ipath_4kalign;
- /* The MTU programmed for this unit */
- u32 ipath_ibmtu;
- /*
- * The max size IB packet, included IB headers that we can send.
- * Starts same as ipath_piosize, but is affected when ibmtu is
- * changed, or by size of eager buffers
- */
- u32 ipath_ibmaxlen;
- /*
- * ibmaxlen at init time, limited by chip and by receive buffer
- * size. Not changed after init.
- */
- u32 ipath_init_ibmaxlen;
- /* size of each rcvegrbuffer */
- u32 ipath_rcvegrbufsize;
- /* localbus width (1, 2,4,8,16,32) from config space */
- u32 ipath_lbus_width;
- /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
- u32 ipath_lbus_speed;
- /*
- * number of sequential ibcstatus change for polling active/quiet
- * (i.e., link not coming up).
- */
- u32 ipath_ibpollcnt;
- /* low and high portions of MSI capability/vector */
- u32 ipath_msi_lo;
- /* saved after PCIe init for restore after reset */
- u32 ipath_msi_hi;
- /* MSI data (vector) saved for restore */
- u16 ipath_msi_data;
- /* MLID programmed for this instance */
- u16 ipath_mlid;
- /* LID programmed for this instance */
- u16 ipath_lid;
- /* list of pkeys programmed; 0 if not set */
- u16 ipath_pkeys[4];
- /*
- * ASCII serial number, from flash, large enough for original
- * all digit strings, and longer QLogic serial number format
- */
- u8 ipath_serial[16];
- /* human readable board version */
- u8 ipath_boardversion[96];
- u8 ipath_lbus_info[32]; /* human readable localbus info */
- /* chip major rev, from ipath_revision */
- u8 ipath_majrev;
- /* chip minor rev, from ipath_revision */
- u8 ipath_minrev;
- /* board rev, from ipath_revision */
- u8 ipath_boardrev;
- /* saved for restore after reset */
- u8 ipath_pci_cacheline;
- /* LID mask control */
- u8 ipath_lmc;
- /* link width supported */
- u8 ipath_link_width_supported;
- /* link speed supported */
- u8 ipath_link_speed_supported;
- u8 ipath_link_width_enabled;
- u8 ipath_link_speed_enabled;
- u8 ipath_link_width_active;
- u8 ipath_link_speed_active;
- /* Rx Polarity inversion (compensate for ~tx on partner) */
- u8 ipath_rx_pol_inv;
-
- u8 ipath_r_portenable_shift;
- u8 ipath_r_intravail_shift;
- u8 ipath_r_tailupd_shift;
- u8 ipath_r_portcfg_shift;
-
- /* unit # of this chip, if present */
- int ipath_unit;
-
- /* local link integrity counter */
- u32 ipath_lli_counter;
- /* local link integrity errors */
- u32 ipath_lli_errors;
- /*
- * Above counts only cases where _successive_ LocalLinkIntegrity
- * errors were seen in the receive headers of kern-packets.
- * Below are the three (monotonically increasing) counters
- * maintained via GPIO interrupts on iba6120-rev2.
- */
- u32 ipath_rxfc_unsupvl_errs;
- u32 ipath_overrun_thresh_errs;
- u32 ipath_lli_errs;
-
- /*
- * Not all devices managed by a driver instance are the same
- * type, so these fields must be per-device.
- */
- u64 ipath_i_bitsextant;
- ipath_err_t ipath_e_bitsextant;
- ipath_err_t ipath_hwe_bitsextant;
-
- /*
- * Below should be computable from number of ports,
- * since they are never modified.
- */
- u64 ipath_i_rcvavail_mask;
- u64 ipath_i_rcvurg_mask;
- u16 ipath_i_rcvurg_shift;
- u16 ipath_i_rcvavail_shift;
-
- /*
- * Register bits for selecting i2c direction and values, used for
- * I2C serial flash.
- */
- u8 ipath_gpio_sda_num;
- u8 ipath_gpio_scl_num;
- u8 ipath_i2c_chain_type;
- u64 ipath_gpio_sda;
- u64 ipath_gpio_scl;
-
- /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
- spinlock_t ipath_gpio_lock;
-
- /*
- * IB link and linktraining states and masks that vary per chip in
- * some way. Set at init, to avoid each IB status change interrupt
- */
- u8 ibcs_ls_shift;
- u8 ibcs_lts_mask;
- u32 ibcs_mask;
- u32 ib_init;
- u32 ib_arm;
- u32 ib_active;
-
- u16 ipath_rhf_offset; /* offset of RHF within receive header entry */
-
- /*
- * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
- * reg. Changes for IBA7220
- */
- u8 ibcc_lic_mask; /* LinkInitCmd */
- u8 ibcc_lc_shift; /* LinkCmd */
- u8 ibcc_mpl_shift; /* Maxpktlen */
-
- u8 delay_mult;
-
- /* used to override LED behavior */
- u8 ipath_led_override; /* Substituted for normal value, if non-zero */
- u16 ipath_led_override_timeoff; /* delta to next timer event */
- u8 ipath_led_override_vals[2]; /* Alternates per blink-frame */
- u8 ipath_led_override_phase; /* Just counts, LSB picks from vals[] */
- atomic_t ipath_led_override_timer_active;
- /* Used to flash LEDs in override mode */
- struct timer_list ipath_led_override_timer;
-
- /* Support (including locks) for EEPROM logging of errors and time */
- /* control access to actual counters, timer */
- spinlock_t ipath_eep_st_lock;
- /* control high-level access to EEPROM */
- struct mutex ipath_eep_lock;
- /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */
- uint64_t ipath_traffic_wds;
- /* active time is kept in seconds, but logged in hours */
- atomic_t ipath_active_time;
- /* Below are nominal shadow of EEPROM, new since last EEPROM update */
- uint8_t ipath_eep_st_errs[IPATH_EEP_LOG_CNT];
- uint8_t ipath_eep_st_new_errs[IPATH_EEP_LOG_CNT];
- uint16_t ipath_eep_hrs;
- /*
- * masks for which bits of errs, hwerrs that cause
- * each of the counters to increment.
- */
- struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT];
-
- /* interrupt mitigation reload register info */
- u16 ipath_jint_idle_ticks; /* idle clock ticks */
- u16 ipath_jint_max_packets; /* max packets across all ports */
-
- /*
- * lock for access to SerDes, and flags to sequence preset
- * versus steady-state. 7220-only at the moment.
- */
- spinlock_t ipath_sdepb_lock;
- u8 ipath_presets_needed; /* Set if presets to be restored next DOWN */
-};
-
-/* ipath_hol_state values (stopping/starting user proc, send flushing) */
-#define IPATH_HOL_UP 0
-#define IPATH_HOL_DOWN 1
-/* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
-#define IPATH_HOL_DOWNSTOP 0
-#define IPATH_HOL_DOWNCONT 1
-
-/* bit positions for sdma_status */
-#define IPATH_SDMA_ABORTING 0
-#define IPATH_SDMA_DISARMED 1
-#define IPATH_SDMA_DISABLED 2
-#define IPATH_SDMA_LAYERBUF 3
-#define IPATH_SDMA_RUNNING 30
-#define IPATH_SDMA_SHUTDOWN 31
-
-/* bit combinations that correspond to abort states */
-#define IPATH_SDMA_ABORT_NONE 0
-#define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
-#define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED))
-#define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISABLED))
-#define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
-#define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
-
-#define IPATH_SDMA_BUF_NONE 0
-#define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
-
-/* Private data for file operations */
-struct ipath_filedata {
- struct ipath_portdata *pd;
- unsigned subport;
- unsigned tidcursor;
- struct ipath_user_sdma_queue *pq;
-};
-extern struct list_head ipath_dev_list;
-extern spinlock_t ipath_devs_lock;
-extern struct ipath_devdata *ipath_lookup(int unit);
-
-int ipath_init_chip(struct ipath_devdata *, int);
-int ipath_enable_wc(struct ipath_devdata *dd);
-void ipath_disable_wc(struct ipath_devdata *dd);
-int ipath_count_units(int *npresentp, int *nupp, int *maxportsp);
-void ipath_shutdown_device(struct ipath_devdata *);
-void ipath_clear_freeze(struct ipath_devdata *);
-
-struct file_operations;
-int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp);
-void ipath_cdev_cleanup(struct cdev **cdevp,
- struct device **devp);
-
-int ipath_diag_add(struct ipath_devdata *);
-void ipath_diag_remove(struct ipath_devdata *);
-
-extern wait_queue_head_t ipath_state_wait;
-
-int ipath_user_add(struct ipath_devdata *dd);
-void ipath_user_remove(struct ipath_devdata *dd);
-
-struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
-
-extern int ipath_diag_inuse;
-
-irqreturn_t ipath_intr(int irq, void *devid);
-int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
- ipath_err_t err);
-#if __IPATH_INFO || __IPATH_DBG
-extern const char *ipath_ibcstatus_str[];
-#endif
-
-/* clean up any per-chip chip-specific stuff */
-void ipath_chip_cleanup(struct ipath_devdata *);
-/* clean up any chip type-specific stuff */
-void ipath_chip_done(void);
-
-void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
- unsigned cnt);
-void ipath_cancel_sends(struct ipath_devdata *, int);
-
-int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
-void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
-
-int ipath_parse_ushort(const char *str, unsigned short *valp);
-
-void ipath_kreceive(struct ipath_portdata *);
-int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
-int ipath_reset_device(int);
-void ipath_get_faststats(unsigned long);
-int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
-int ipath_set_linkstate(struct ipath_devdata *, u8);
-int ipath_set_mtu(struct ipath_devdata *, u16);
-int ipath_set_lid(struct ipath_devdata *, u32, u8);
-int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
-void ipath_enable_armlaunch(struct ipath_devdata *);
-void ipath_disable_armlaunch(struct ipath_devdata *);
-void ipath_hol_down(struct ipath_devdata *);
-void ipath_hol_up(struct ipath_devdata *);
-void ipath_hol_event(unsigned long);
-void ipath_toggle_rclkrls(struct ipath_devdata *);
-void ipath_sd7220_clr_ibpar(struct ipath_devdata *);
-void ipath_set_relock_poll(struct ipath_devdata *, int);
-void ipath_shutdown_relock_poll(struct ipath_devdata *);
-
-/* for use in system calls, where we want to know device type, etc. */
-#define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
-#define subport_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->subport
-#define tidcursor_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->tidcursor
-#define user_sdma_queue_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->pq
-
-/*
- * values for ipath_flags
- */
- /* chip can report link latency (IB 1.2) */
-#define IPATH_HAS_LINK_LATENCY 0x1
- /* The chip is up and initted */
-#define IPATH_INITTED 0x2
- /* set if any user code has set kr_rcvhdrsize */
-#define IPATH_RCVHDRSZ_SET 0x4
- /* The chip is present and valid for accesses */
-#define IPATH_PRESENT 0x8
- /* HT link0 is only 8 bits wide, ignore upper byte crc
- * errors, etc. */
-#define IPATH_8BIT_IN_HT0 0x10
- /* HT link1 is only 8 bits wide, ignore upper byte crc
- * errors, etc. */
-#define IPATH_8BIT_IN_HT1 0x20
- /* The link is down */
-#define IPATH_LINKDOWN 0x40
- /* The link level is up (0x11) */
-#define IPATH_LINKINIT 0x80
- /* The link is in the armed (0x21) state */
-#define IPATH_LINKARMED 0x100
- /* The link is in the active (0x31) state */
-#define IPATH_LINKACTIVE 0x200
- /* link current state is unknown */
-#define IPATH_LINKUNK 0x400
- /* Write combining flush needed for PIO */
-#define IPATH_PIO_FLUSH_WC 0x1000
- /* DMA Receive tail pointer */
-#define IPATH_NODMA_RTAIL 0x2000
- /* no IB cable, or no device on IB cable */
-#define IPATH_NOCABLE 0x4000
- /* Supports port zero per packet receive interrupts via
- * GPIO */
-#define IPATH_GPIO_INTR 0x8000
- /* uses the coded 4byte TID, not 8 byte */
-#define IPATH_4BYTE_TID 0x10000
- /* packet/word counters are 32 bit, else those 4 counters
- * are 64bit */
-#define IPATH_32BITCOUNTERS 0x20000
- /* Interrupt register is 64 bits */
-#define IPATH_INTREG_64 0x40000
- /* can miss port0 rx interrupts */
-#define IPATH_DISABLED 0x80000 /* administratively disabled */
- /* Use GPIO interrupts for new counters */
-#define IPATH_GPIO_ERRINTRS 0x100000
-#define IPATH_SWAP_PIOBUFS 0x200000
- /* Supports Send DMA */
-#define IPATH_HAS_SEND_DMA 0x400000
- /* Supports Send Count (not just word count) in PBC */
-#define IPATH_HAS_PBC_CNT 0x800000
- /* Suppress heartbeat, even if turning off loopback */
-#define IPATH_NO_HRTBT 0x1000000
-#define IPATH_HAS_THRESH_UPDATE 0x4000000
-#define IPATH_HAS_MULT_IB_SPEED 0x8000000
-#define IPATH_IB_AUTONEG_INPROG 0x10000000
-#define IPATH_IB_AUTONEG_FAILED 0x20000000
- /* Linkdown-disable intentionally, Do not attempt to bring up */
-#define IPATH_IB_LINK_DISABLED 0x40000000
-#define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
-
-/* Bits in GPIO for the added interrupts */
-#define IPATH_GPIO_PORT0_BIT 2
-#define IPATH_GPIO_RXUVL_BIT 3
-#define IPATH_GPIO_OVRUN_BIT 4
-#define IPATH_GPIO_LLI_BIT 5
-#define IPATH_GPIO_ERRINTR_MASK 0x38
-
-/* portdata flag bit offsets */
- /* waiting for a packet to arrive */
-#define IPATH_PORT_WAITING_RCV 2
- /* master has not finished initializing */
-#define IPATH_PORT_MASTER_UNINIT 4
- /* waiting for an urgent packet to arrive */
-#define IPATH_PORT_WAITING_URG 5
-
-/* free up any allocated data at closes */
-void ipath_free_data(struct ipath_portdata *dd);
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
-void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
- unsigned len, int avail);
-void ipath_init_iba6110_funcs(struct ipath_devdata *);
-void ipath_get_eeprom_info(struct ipath_devdata *);
-int ipath_update_eeprom_log(struct ipath_devdata *dd);
-void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
-u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
-void ipath_disarm_senderrbufs(struct ipath_devdata *);
-void ipath_force_pio_avail_update(struct ipath_devdata *);
-void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
-
-/*
- * Set LED override, only the two LSBs have "public" meaning, but
- * any non-zero value substitutes them for the Link and LinkTrain
- * LED states.
- */
-#define IPATH_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
-#define IPATH_LED_LOG 2 /* Logical (link) YELLOW LED */
-void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
-
-/* send dma routines */
-int setup_sdma(struct ipath_devdata *);
-void teardown_sdma(struct ipath_devdata *);
-void ipath_restart_sdma(struct ipath_devdata *);
-void ipath_sdma_intr(struct ipath_devdata *);
-int ipath_sdma_verbs_send(struct ipath_devdata *, struct ipath_sge_state *,
- u32, struct ipath_verbs_txreq *);
-/* ipath_sdma_lock should be locked before calling this. */
-int ipath_sdma_make_progress(struct ipath_devdata *dd);
-
-/* must be called under ipath_sdma_lock */
-static inline u16 ipath_sdma_descq_freecnt(const struct ipath_devdata *dd)
-{
- return dd->ipath_sdma_descq_cnt -
- (dd->ipath_sdma_descq_added - dd->ipath_sdma_descq_removed) -
- 1 - dd->ipath_sdma_desc_nreserved;
-}
-
-static inline void ipath_sdma_desc_reserve(struct ipath_devdata *dd, u16 cnt)
-{
- dd->ipath_sdma_desc_nreserved += cnt;
-}
-
-static inline void ipath_sdma_desc_unreserve(struct ipath_devdata *dd, u16 cnt)
-{
- dd->ipath_sdma_desc_nreserved -= cnt;
-}
-
-/*
- * number of words used for protocol header if not set by ipath_userinit();
- */
-#define IPATH_DFLT_RCVHDRSIZE 9
-
-int ipath_get_user_pages(unsigned long, size_t, struct page **);
-void ipath_release_user_pages(struct page **, size_t);
-void ipath_release_user_pages_on_close(struct page **, size_t);
-int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
-int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
-int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
-int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
-
-/* these are used for the registers that vary with port */
-void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
- unsigned, u64);
-
-/*
- * We could have a single register get/put routine, that takes a group type,
- * but this is somewhat clearer and cleaner. It also gives us some error
- * checking. 64 bit register reads should always work, but are inefficient
- * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
- * so we use kreg32 wherever possible. User register and counter register
- * reads are always 32 bit reads, so only one form of those routines.
- */
-
-/*
- * At the moment, none of the s-registers are writable, so no
- * ipath_write_sreg().
- */
-
-/**
- * ipath_read_ureg32 - read 32-bit virtualized per-port register
- * @dd: device
- * @regno: register number
- * @port: port number
- *
- * Return the contents of a register that is virtualized to be per port.
- * Returns -1 on errors (not distinguishable from valid contents at
- * runtime; we may add a separate error variable at some point).
- */
-static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
- ipath_ureg regno, int port)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
-
- return readl(regno + (u64 __iomem *)
- (dd->ipath_uregbase +
- (char __iomem *)dd->ipath_kregbase +
- dd->ipath_ureg_align * port));
-}
-
-/**
- * ipath_write_ureg - write 32-bit virtualized per-port register
- * @dd: device
- * @regno: register number
- * @value: value
- * @port: port
- *
- * Write the contents of a register that is virtualized to be per port.
- */
-static inline void ipath_write_ureg(const struct ipath_devdata *dd,
- ipath_ureg regno, u64 value, int port)
-{
- u64 __iomem *ubase = (u64 __iomem *)
- (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
- dd->ipath_ureg_align * port);
- if (dd->ipath_kregbase)
- writeq(value, &ubase[regno]);
-}
-
-static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
- ipath_kreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return -1;
- return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
-}
-
-static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
- ipath_kreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return -1;
-
- return readq(&dd->ipath_kregbase[regno]);
-}
-
-static inline void ipath_write_kreg(const struct ipath_devdata *dd,
- ipath_kreg regno, u64 value)
-{
- if (dd->ipath_kregbase)
- writeq(value, &dd->ipath_kregbase[regno]);
-}
-
-static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
- ipath_sreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
-
- return readq(regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
- ipath_sreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
- return readl(regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline void ipath_write_creg(const struct ipath_devdata *dd,
- ipath_creg regno, u64 value)
-{
- if (dd->ipath_kregbase)
- writeq(value, regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
-{
- *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
-}
-
-static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
-{
- return (u32) le64_to_cpu(*((volatile __le64 *)
- pd->port_rcvhdrtail_kvaddr));
-}
-
-static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
-{
- const struct ipath_devdata *dd = pd->port_dd;
- u32 hdrqtail;
-
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- __le32 *rhf_addr;
- u32 seq;
-
- rhf_addr = (__le32 *) pd->port_rcvhdrq +
- pd->port_head + dd->ipath_rhf_offset;
- seq = ipath_hdrget_seq(rhf_addr);
- hdrqtail = pd->port_head;
- if (seq == pd->port_seq_cnt)
- hdrqtail++;
- } else
- hdrqtail = ipath_get_rcvhdrtail(pd);
-
- return hdrqtail;
-}
-
-static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
-{
- return (dd->ipath_flags & IPATH_INTREG_64) ?
- ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r);
-}
-
-/*
- * from contents of IBCStatus (or a saved copy), return linkstate
- * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
- * everywhere, anyway (and should be, for almost all purposes).
- */
-static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
-{
- u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
- if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER)
- state = INFINIPATH_IBCS_L_STATE_ACTIVE;
- return state;
-}
-
-/* from contents of IBCStatus (or a saved copy), return linktrainingstate */
-static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs)
-{
- return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- dd->ibcs_lts_mask;
-}
-
-/*
- * from contents of IBCStatus (or a saved copy), return logical link state
- * combination of link state and linktraining state (down, active, init,
- * arm, etc.
- */
-static inline u32 ipath_ib_state(struct ipath_devdata *dd, u64 ibcs)
-{
- u32 ibs;
- ibs = (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- dd->ibcs_lts_mask;
- ibs |= (u32)(ibcs &
- (INFINIPATH_IBCS_LINKSTATE_MASK << dd->ibcs_ls_shift));
- return ibs;
-}
-
-/*
- * sysfs interface.
- */
-
-struct device_driver;
-
-extern const char ib_ipath_version[];
-
-extern const struct attribute_group *ipath_driver_attr_groups[];
-
-int ipath_device_create_group(struct device *, struct ipath_devdata *);
-void ipath_device_remove_group(struct device *, struct ipath_devdata *);
-int ipath_expose_reset(struct device *);
-
-int ipath_init_ipathfs(void);
-void ipath_exit_ipathfs(void);
-int ipathfs_add_device(struct ipath_devdata *);
-int ipathfs_remove_device(struct ipath_devdata *);
-
-/*
- * dma_addr wrappers - all 0's invalid for hw
- */
-dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
- size_t, int);
-dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
-const char *ipath_get_unit_name(int unit);
-
-/*
- * Flush write combining store buffers (if present) and perform a write
- * barrier.
- */
-#if defined(CONFIG_X86_64)
-#define ipath_flush_wc() asm volatile("sfence" ::: "memory")
-#else
-#define ipath_flush_wc() wmb()
-#endif
-
-extern unsigned ipath_debug; /* debugging bit mask */
-extern unsigned ipath_linkrecovery;
-extern unsigned ipath_mtu4096;
-extern struct mutex ipath_mutex;
-
-#define IPATH_DRV_NAME "ib_ipath"
-#define IPATH_MAJOR 233
-#define IPATH_USER_MINOR_BASE 0
-#define IPATH_DIAGPKT_MINOR 127
-#define IPATH_DIAG_MINOR_BASE 129
-#define IPATH_NMINORS 255
-
-#define ipath_dev_err(dd,fmt,...) \
- do { \
- const struct ipath_devdata *__dd = (dd); \
- if (__dd->pcidev) \
- dev_err(&__dd->pcidev->dev, "%s: " fmt, \
- ipath_get_unit_name(__dd->ipath_unit), \
- ##__VA_ARGS__); \
- else \
- printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
- ipath_get_unit_name(__dd->ipath_unit), \
- ##__VA_ARGS__); \
- } while (0)
-
-#if _IPATH_DEBUGGING
-
-# define __IPATH_DBG_WHICH(which,fmt,...) \
- do { \
- if (unlikely(ipath_debug & (which))) \
- printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
- __func__,##__VA_ARGS__); \
- } while(0)
-
-# define ipath_dbg(fmt,...) \
- __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
-# define ipath_cdbg(which,fmt,...) \
- __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
-
-#else /* ! _IPATH_DEBUGGING */
-
-# define ipath_dbg(fmt,...)
-# define ipath_cdbg(which,fmt,...)
-
-#endif /* _IPATH_DEBUGGING */
-
-/*
- * this is used for formatting hw error messages...
- */
-struct ipath_hwerror_msgs {
- u64 mask;
- const char *msg;
-};
-
-#define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
-
-/* in ipath_intr.c... */
-void ipath_format_hwerrors(u64 hwerrs,
- const struct ipath_hwerror_msgs *hwerrmsgs,
- size_t nhwerrmsgs,
- char *msg, size_t lmsg);
-
-#endif /* _IPATH_KERNEL_H */
diff --git a/drivers/staging/rdma/ipath/ipath_keys.c b/drivers/staging/rdma/ipath/ipath_keys.c
deleted file mode 100644
index c0e933f..0000000
--- a/drivers/staging/rdma/ipath/ipath_keys.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <asm/io.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/**
- * ipath_alloc_lkey - allocate an lkey
- * @rkt: lkey table in which to allocate the lkey
- * @mr: memory region that this lkey protects
- *
- * Returns 1 if successful, otherwise returns 0.
- */
-
-int ipath_alloc_lkey(struct ipath_lkey_table *rkt, struct ipath_mregion *mr)
-{
- unsigned long flags;
- u32 r;
- u32 n;
- int ret;
-
- spin_lock_irqsave(&rkt->lock, flags);
-
- /* Find the next available LKEY */
- r = n = rkt->next;
- for (;;) {
- if (rkt->table[r] == NULL)
- break;
- r = (r + 1) & (rkt->max - 1);
- if (r == n) {
- spin_unlock_irqrestore(&rkt->lock, flags);
- ipath_dbg("LKEY table full\n");
- ret = 0;
- goto bail;
- }
- }
- rkt->next = (r + 1) & (rkt->max - 1);
- /*
- * Make sure lkey is never zero which is reserved to indicate an
- * unrestricted LKEY.
- */
- rkt->gen++;
- mr->lkey = (r << (32 - ib_ipath_lkey_table_size)) |
- ((((1 << (24 - ib_ipath_lkey_table_size)) - 1) & rkt->gen)
- << 8);
- if (mr->lkey == 0) {
- mr->lkey |= 1 << 8;
- rkt->gen++;
- }
- rkt->table[r] = mr;
- spin_unlock_irqrestore(&rkt->lock, flags);
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_free_lkey - free an lkey
- * @rkt: table from which to free the lkey
- * @lkey: lkey id to free
- */
-void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey)
-{
- unsigned long flags;
- u32 r;
-
- if (lkey == 0)
- return;
- r = lkey >> (32 - ib_ipath_lkey_table_size);
- spin_lock_irqsave(&rkt->lock, flags);
- rkt->table[r] = NULL;
- spin_unlock_irqrestore(&rkt->lock, flags);
-}
-
-/**
- * ipath_lkey_ok - check IB SGE for validity and initialize
- * @rkt: table containing lkey to check SGE against
- * @isge: outgoing internal SGE
- * @sge: SGE to check
- * @acc: access flags
- *
- * Return 1 if valid and successful, otherwise returns 0.
- *
- * Check the IB SGE for validity and initialize our internal version
- * of it.
- */
-int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
- struct ib_sge *sge, int acc)
-{
- struct ipath_lkey_table *rkt = &to_idev(qp->ibqp.device)->lk_table;
- struct ipath_mregion *mr;
- unsigned n, m;
- size_t off;
- int ret;
-
- /*
- * We use LKEY == zero for kernel virtual addresses
- * (see ipath_get_dma_mr and ipath_dma.c).
- */
- if (sge->lkey == 0) {
- /* always a kernel port, no locking needed */
- struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
-
- if (pd->user) {
- ret = 0;
- goto bail;
- }
- isge->mr = NULL;
- isge->vaddr = (void *) sge->addr;
- isge->length = sge->length;
- isge->sge_length = sge->length;
- ret = 1;
- goto bail;
- }
- mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
- if (unlikely(mr == NULL || mr->lkey != sge->lkey ||
- qp->ibqp.pd != mr->pd)) {
- ret = 0;
- goto bail;
- }
-
- off = sge->addr - mr->user_base;
- if (unlikely(sge->addr < mr->user_base ||
- off + sge->length > mr->length ||
- (mr->access_flags & acc) != acc)) {
- ret = 0;
- goto bail;
- }
-
- off += mr->offset;
- m = 0;
- n = 0;
- while (off >= mr->map[m]->segs[n].length) {
- off -= mr->map[m]->segs[n].length;
- n++;
- if (n >= IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- isge->mr = mr;
- isge->vaddr = mr->map[m]->segs[n].vaddr + off;
- isge->length = mr->map[m]->segs[n].length - off;
- isge->sge_length = sge->length;
- isge->m = m;
- isge->n = n;
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_rkey_ok - check the IB virtual address, length, and RKEY
- * @dev: infiniband device
- * @ss: SGE state
- * @len: length of data
- * @vaddr: virtual address to place data
- * @rkey: rkey to check
- * @acc: access flags
- *
- * Return 1 if successful, otherwise 0.
- */
-int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
- u32 len, u64 vaddr, u32 rkey, int acc)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_lkey_table *rkt = &dev->lk_table;
- struct ipath_sge *sge = &ss->sge;
- struct ipath_mregion *mr;
- unsigned n, m;
- size_t off;
- int ret;
-
- /*
- * We use RKEY == zero for kernel virtual addresses
- * (see ipath_get_dma_mr and ipath_dma.c).
- */
- if (rkey == 0) {
- /* always a kernel port, no locking needed */
- struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
-
- if (pd->user) {
- ret = 0;
- goto bail;
- }
- sge->mr = NULL;
- sge->vaddr = (void *) vaddr;
- sge->length = len;
- sge->sge_length = len;
- ss->sg_list = NULL;
- ss->num_sge = 1;
- ret = 1;
- goto bail;
- }
-
- mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
- if (unlikely(mr == NULL || mr->lkey != rkey ||
- qp->ibqp.pd != mr->pd)) {
- ret = 0;
- goto bail;
- }
-
- off = vaddr - mr->iova;
- if (unlikely(vaddr < mr->iova || off + len > mr->length ||
- (mr->access_flags & acc) == 0)) {
- ret = 0;
- goto bail;
- }
-
- off += mr->offset;
- m = 0;
- n = 0;
- while (off >= mr->map[m]->segs[n].length) {
- off -= mr->map[m]->segs[n].length;
- n++;
- if (n >= IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- sge->mr = mr;
- sge->vaddr = mr->map[m]->segs[n].vaddr + off;
- sge->length = mr->map[m]->segs[n].length - off;
- sge->sge_length = len;
- sge->m = m;
- sge->n = n;
- ss->sg_list = NULL;
- ss->num_sge = 1;
-
- ret = 1;
-
-bail:
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_mad.c b/drivers/staging/rdma/ipath/ipath_mad.c
deleted file mode 100644
index ad3a926..0000000
--- a/drivers/staging/rdma/ipath/ipath_mad.c
+++ /dev/null
@@ -1,1521 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <rdma/ib_smi.h>
-#include <rdma/ib_pma.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004)
-#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008)
-#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C)
-#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C)
-
-static int reply(struct ib_smp *smp)
-{
- /*
- * The verbs framework will handle the directed/LID route
- * packet changes.
- */
- smp->method = IB_MGMT_METHOD_GET_RESP;
- if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
- smp->status |= IB_SMP_DIRECTION;
- return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
-}
-
-static int recv_subn_get_nodedescription(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- if (smp->attr_mod)
- smp->status |= IB_SMP_INVALID_FIELD;
-
- memcpy(smp->data, ibdev->node_desc, sizeof(smp->data));
-
- return reply(smp);
-}
-
-struct nodeinfo {
- u8 base_version;
- u8 class_version;
- u8 node_type;
- u8 num_ports;
- __be64 sys_guid;
- __be64 node_guid;
- __be64 port_guid;
- __be16 partition_cap;
- __be16 device_id;
- __be32 revision;
- u8 local_port_num;
- u8 vendor_id[3];
-} __attribute__ ((packed));
-
-static int recv_subn_get_nodeinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct nodeinfo *nip = (struct nodeinfo *)&smp->data;
- struct ipath_devdata *dd = to_idev(ibdev)->dd;
- u32 vendor, majrev, minrev;
-
- /* GUID 0 is illegal */
- if (smp->attr_mod || (dd->ipath_guid == 0))
- smp->status |= IB_SMP_INVALID_FIELD;
-
- nip->base_version = 1;
- nip->class_version = 1;
- nip->node_type = 1; /* channel adapter */
- /*
- * XXX The num_ports value will need a layer function to get
- * the value if we ever have more than one IB port on a chip.
- * We will also need to get the GUID for the port.
- */
- nip->num_ports = ibdev->phys_port_cnt;
- /* This is already in network order */
- nip->sys_guid = to_idev(ibdev)->sys_image_guid;
- nip->node_guid = dd->ipath_guid;
- nip->port_guid = dd->ipath_guid;
- nip->partition_cap = cpu_to_be16(ipath_get_npkeys(dd));
- nip->device_id = cpu_to_be16(dd->ipath_deviceid);
- majrev = dd->ipath_majrev;
- minrev = dd->ipath_minrev;
- nip->revision = cpu_to_be32((majrev << 16) | minrev);
- nip->local_port_num = port;
- vendor = dd->ipath_vendorid;
- nip->vendor_id[0] = IPATH_SRC_OUI_1;
- nip->vendor_id[1] = IPATH_SRC_OUI_2;
- nip->vendor_id[2] = IPATH_SRC_OUI_3;
-
- return reply(smp);
-}
-
-static int recv_subn_get_guidinfo(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- u32 startgx = 8 * be32_to_cpu(smp->attr_mod);
- __be64 *p = (__be64 *) smp->data;
-
- /* 32 blocks of 8 64-bit GUIDs per block */
-
- memset(smp->data, 0, sizeof(smp->data));
-
- /*
- * We only support one GUID for now. If this changes, the
- * portinfo.guid_cap field needs to be updated too.
- */
- if (startgx == 0) {
- __be64 g = to_idev(ibdev)->dd->ipath_guid;
- if (g == 0)
- /* GUID 0 is illegal */
- smp->status |= IB_SMP_INVALID_FIELD;
- else
- /* The first is a copy of the read-only HW GUID. */
- *p = g;
- } else
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return reply(smp);
-}
-
-static void set_link_width_enabled(struct ipath_devdata *dd, u32 w)
-{
- (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, w);
-}
-
-static void set_link_speed_enabled(struct ipath_devdata *dd, u32 s)
-{
- (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, s);
-}
-
-static int get_overrunthreshold(struct ipath_devdata *dd)
-{
- return (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
-}
-
-/**
- * set_overrunthreshold - set the overrun threshold
- * @dd: the infinipath device
- * @n: the new threshold
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_overrunthreshold(struct ipath_devdata *dd, unsigned n)
-{
- unsigned v;
-
- v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
- if (v != n) {
- dd->ipath_ibcctrl &=
- ~(INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK <<
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT);
- dd->ipath_ibcctrl |=
- (u64) n << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- }
- return 0;
-}
-
-static int get_phyerrthreshold(struct ipath_devdata *dd)
-{
- return (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
-}
-
-/**
- * set_phyerrthreshold - set the physical error threshold
- * @dd: the infinipath device
- * @n: the new threshold
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_phyerrthreshold(struct ipath_devdata *dd, unsigned n)
-{
- unsigned v;
-
- v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
- if (v != n) {
- dd->ipath_ibcctrl &=
- ~(INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK <<
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT);
- dd->ipath_ibcctrl |=
- (u64) n << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- }
- return 0;
-}
-
-/**
- * get_linkdowndefaultstate - get the default linkdown state
- * @dd: the infinipath device
- *
- * Returns zero if the default is POLL, 1 if the default is SLEEP.
- */
-static int get_linkdowndefaultstate(struct ipath_devdata *dd)
-{
- return !!(dd->ipath_ibcctrl & INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE);
-}
-
-static int recv_subn_get_portinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct ipath_ibdev *dev;
- struct ipath_devdata *dd;
- struct ib_port_info *pip = (struct ib_port_info *)smp->data;
- u16 lid;
- u8 ibcstat;
- u8 mtu;
- int ret;
-
- if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) {
- smp->status |= IB_SMP_INVALID_FIELD;
- ret = reply(smp);
- goto bail;
- }
-
- dev = to_idev(ibdev);
- dd = dev->dd;
-
- /* Clear all fields. Only set the non-zero fields. */
- memset(smp->data, 0, sizeof(smp->data));
-
- /* Only return the mkey if the protection field allows it. */
- if (smp->method == IB_MGMT_METHOD_SET || dev->mkey == smp->mkey ||
- dev->mkeyprot == 0)
- pip->mkey = dev->mkey;
- pip->gid_prefix = dev->gid_prefix;
- lid = dd->ipath_lid;
- pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE;
- pip->sm_lid = cpu_to_be16(dev->sm_lid);
- pip->cap_mask = cpu_to_be32(dev->port_cap_flags);
- /* pip->diag_code; */
- pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period);
- pip->local_port_num = port;
- pip->link_width_enabled = dd->ipath_link_width_enabled;
- pip->link_width_supported = dd->ipath_link_width_supported;
- pip->link_width_active = dd->ipath_link_width_active;
- pip->linkspeed_portstate = dd->ipath_link_speed_supported << 4;
- ibcstat = dd->ipath_lastibcstat;
- /* map LinkState to IB portinfo values. */
- pip->linkspeed_portstate |= ipath_ib_linkstate(dd, ibcstat) + 1;
-
- pip->portphysstate_linkdown =
- (ipath_cvt_physportstate[ibcstat & dd->ibcs_lts_mask] << 4) |
- (get_linkdowndefaultstate(dd) ? 1 : 2);
- pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dd->ipath_lmc;
- pip->linkspeedactive_enabled = (dd->ipath_link_speed_active << 4) |
- dd->ipath_link_speed_enabled;
- switch (dd->ipath_ibmtu) {
- case 4096:
- mtu = IB_MTU_4096;
- break;
- case 2048:
- mtu = IB_MTU_2048;
- break;
- case 1024:
- mtu = IB_MTU_1024;
- break;
- case 512:
- mtu = IB_MTU_512;
- break;
- case 256:
- mtu = IB_MTU_256;
- break;
- default: /* oops, something is wrong */
- mtu = IB_MTU_2048;
- break;
- }
- pip->neighbormtu_mastersmsl = (mtu << 4) | dev->sm_sl;
- pip->vlcap_inittype = 0x10; /* VLCap = VL0, InitType = 0 */
- pip->vl_high_limit = dev->vl_high_limit;
- /* pip->vl_arb_high_cap; // only one VL */
- /* pip->vl_arb_low_cap; // only one VL */
- /* InitTypeReply = 0 */
- /* our mtu cap depends on whether 4K MTU enabled or not */
- pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
- /* HCAs ignore VLStallCount and HOQLife */
- /* pip->vlstallcnt_hoqlife; */
- pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
- pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
- /* P_KeyViolations are counted by hardware. */
- pip->pkey_violations =
- cpu_to_be16((ipath_get_cr_errpkey(dd) -
- dev->z_pkey_violations) & 0xFFFF);
- pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
- /* Only the hardware GUID is supported for now */
- pip->guid_cap = 1;
- pip->clientrereg_resv_subnetto = dev->subnet_timeout;
- /* 32.768 usec. response time (guessing) */
- pip->resv_resptimevalue = 3;
- pip->localphyerrors_overrunerrors =
- (get_phyerrthreshold(dd) << 4) |
- get_overrunthreshold(dd);
- /* pip->max_credit_hint; */
- if (dev->port_cap_flags & IB_PORT_LINK_LATENCY_SUP) {
- u32 v;
-
- v = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LINKLATENCY);
- pip->link_roundtrip_latency[0] = v >> 16;
- pip->link_roundtrip_latency[1] = v >> 8;
- pip->link_roundtrip_latency[2] = v;
- }
-
- ret = reply(smp);
-
-bail:
- return ret;
-}
-
-/**
- * get_pkeys - return the PKEY table for port 0
- * @dd: the infinipath device
- * @pkeys: the pkey table is placed here
- */
-static int get_pkeys(struct ipath_devdata *dd, u16 * pkeys)
-{
- /* always a kernel port, no locking needed */
- struct ipath_portdata *pd = dd->ipath_pd[0];
-
- memcpy(pkeys, pd->port_pkeys, sizeof(pd->port_pkeys));
-
- return 0;
-}
-
-static int recv_subn_get_pkeytable(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
- u16 *p = (u16 *) smp->data;
- __be16 *q = (__be16 *) smp->data;
-
- /* 64 blocks of 32 16-bit P_Key entries */
-
- memset(smp->data, 0, sizeof(smp->data));
- if (startpx == 0) {
- struct ipath_ibdev *dev = to_idev(ibdev);
- unsigned i, n = ipath_get_npkeys(dev->dd);
-
- get_pkeys(dev->dd, p);
-
- for (i = 0; i < n; i++)
- q[i] = cpu_to_be16(p[i]);
- } else
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return reply(smp);
-}
-
-static int recv_subn_set_guidinfo(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- /* The only GUID we support is the first read-only entry. */
- return recv_subn_get_guidinfo(smp, ibdev);
-}
-
-/**
- * set_linkdowndefaultstate - set the default linkdown state
- * @dd: the infinipath device
- * @sleep: the new state
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_linkdowndefaultstate(struct ipath_devdata *dd, int sleep)
-{
- if (sleep)
- dd->ipath_ibcctrl |= INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
- else
- dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- return 0;
-}
-
-/**
- * recv_subn_set_portinfo - set port information
- * @smp: the incoming SM packet
- * @ibdev: the infiniband device
- * @port: the port on the device
- *
- * Set Portinfo (see ch. 14.2.5.6).
- */
-static int recv_subn_set_portinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_port_info *pip = (struct ib_port_info *)smp->data;
- struct ib_event event;
- struct ipath_ibdev *dev;
- struct ipath_devdata *dd;
- char clientrereg = 0;
- u16 lid, smlid;
- u8 lwe;
- u8 lse;
- u8 state;
- u16 lstate;
- u32 mtu;
- int ret, ore;
-
- if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt)
- goto err;
-
- dev = to_idev(ibdev);
- dd = dev->dd;
- event.device = ibdev;
- event.element.port_num = port;
-
- dev->mkey = pip->mkey;
- dev->gid_prefix = pip->gid_prefix;
- dev->mkey_lease_period = be16_to_cpu(pip->mkey_lease_period);
-
- lid = be16_to_cpu(pip->lid);
- if (dd->ipath_lid != lid ||
- dd->ipath_lmc != (pip->mkeyprot_resv_lmc & 7)) {
- /* Must be a valid unicast LID address. */
- if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE)
- goto err;
- ipath_set_lid(dd, lid, pip->mkeyprot_resv_lmc & 7);
- event.event = IB_EVENT_LID_CHANGE;
- ib_dispatch_event(&event);
- }
-
- smlid = be16_to_cpu(pip->sm_lid);
- if (smlid != dev->sm_lid) {
- /* Must be a valid unicast LID address. */
- if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE)
- goto err;
- dev->sm_lid = smlid;
- event.event = IB_EVENT_SM_CHANGE;
- ib_dispatch_event(&event);
- }
-
- /* Allow 1x or 4x to be set (see 14.2.6.6). */
- lwe = pip->link_width_enabled;
- if (lwe) {
- if (lwe == 0xFF)
- lwe = dd->ipath_link_width_supported;
- else if (lwe >= 16 || (lwe & ~dd->ipath_link_width_supported))
- goto err;
- set_link_width_enabled(dd, lwe);
- }
-
- /* Allow 2.5 or 5.0 Gbs. */
- lse = pip->linkspeedactive_enabled & 0xF;
- if (lse) {
- if (lse == 15)
- lse = dd->ipath_link_speed_supported;
- else if (lse >= 8 || (lse & ~dd->ipath_link_speed_supported))
- goto err;
- set_link_speed_enabled(dd, lse);
- }
-
- /* Set link down default state. */
- switch (pip->portphysstate_linkdown & 0xF) {
- case 0: /* NOP */
- break;
- case 1: /* SLEEP */
- if (set_linkdowndefaultstate(dd, 1))
- goto err;
- break;
- case 2: /* POLL */
- if (set_linkdowndefaultstate(dd, 0))
- goto err;
- break;
- default:
- goto err;
- }
-
- dev->mkeyprot = pip->mkeyprot_resv_lmc >> 6;
- dev->vl_high_limit = pip->vl_high_limit;
-
- switch ((pip->neighbormtu_mastersmsl >> 4) & 0xF) {
- case IB_MTU_256:
- mtu = 256;
- break;
- case IB_MTU_512:
- mtu = 512;
- break;
- case IB_MTU_1024:
- mtu = 1024;
- break;
- case IB_MTU_2048:
- mtu = 2048;
- break;
- case IB_MTU_4096:
- if (!ipath_mtu4096)
- goto err;
- mtu = 4096;
- break;
- default:
- /* XXX We have already partially updated our state! */
- goto err;
- }
- ipath_set_mtu(dd, mtu);
-
- dev->sm_sl = pip->neighbormtu_mastersmsl & 0xF;
-
- /* We only support VL0 */
- if (((pip->operationalvl_pei_peo_fpi_fpo >> 4) & 0xF) > 1)
- goto err;
-
- if (pip->mkey_violations == 0)
- dev->mkey_violations = 0;
-
- /*
- * Hardware counter can't be reset so snapshot and subtract
- * later.
- */
- if (pip->pkey_violations == 0)
- dev->z_pkey_violations = ipath_get_cr_errpkey(dd);
-
- if (pip->qkey_violations == 0)
- dev->qkey_violations = 0;
-
- ore = pip->localphyerrors_overrunerrors;
- if (set_phyerrthreshold(dd, (ore >> 4) & 0xF))
- goto err;
-
- if (set_overrunthreshold(dd, (ore & 0xF)))
- goto err;
-
- dev->subnet_timeout = pip->clientrereg_resv_subnetto & 0x1F;
-
- if (pip->clientrereg_resv_subnetto & 0x80) {
- clientrereg = 1;
- event.event = IB_EVENT_CLIENT_REREGISTER;
- ib_dispatch_event(&event);
- }
-
- /*
- * Do the port state change now that the other link parameters
- * have been set.
- * Changing the port physical state only makes sense if the link
- * is down or is being set to down.
- */
- state = pip->linkspeed_portstate & 0xF;
- lstate = (pip->portphysstate_linkdown >> 4) & 0xF;
- if (lstate && !(state == IB_PORT_DOWN || state == IB_PORT_NOP))
- goto err;
-
- /*
- * Only state changes of DOWN, ARM, and ACTIVE are valid
- * and must be in the correct state to take effect (see 7.2.6).
- */
- switch (state) {
- case IB_PORT_NOP:
- if (lstate == 0)
- break;
- /* FALLTHROUGH */
- case IB_PORT_DOWN:
- if (lstate == 0)
- lstate = IPATH_IB_LINKDOWN_ONLY;
- else if (lstate == 1)
- lstate = IPATH_IB_LINKDOWN_SLEEP;
- else if (lstate == 2)
- lstate = IPATH_IB_LINKDOWN;
- else if (lstate == 3)
- lstate = IPATH_IB_LINKDOWN_DISABLE;
- else
- goto err;
- ipath_set_linkstate(dd, lstate);
- if (lstate == IPATH_IB_LINKDOWN_DISABLE) {
- ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
- goto done;
- }
- ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED |
- IPATH_LINKACTIVE, 1000);
- break;
- case IB_PORT_ARMED:
- ipath_set_linkstate(dd, IPATH_IB_LINKARM);
- break;
- case IB_PORT_ACTIVE:
- ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
- break;
- default:
- /* XXX We have already partially updated our state! */
- goto err;
- }
-
- ret = recv_subn_get_portinfo(smp, ibdev, port);
-
- if (clientrereg)
- pip->clientrereg_resv_subnetto |= 0x80;
-
- goto done;
-
-err:
- smp->status |= IB_SMP_INVALID_FIELD;
- ret = recv_subn_get_portinfo(smp, ibdev, port);
-
-done:
- return ret;
-}
-
-/**
- * rm_pkey - decrecment the reference count for the given PKEY
- * @dd: the infinipath device
- * @key: the PKEY index
- *
- * Return true if this was the last reference and the hardware table entry
- * needs to be changed.
- */
-static int rm_pkey(struct ipath_devdata *dd, u16 key)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (dd->ipath_pkeys[i] != key)
- continue;
- if (atomic_dec_and_test(&dd->ipath_pkeyrefs[i])) {
- dd->ipath_pkeys[i] = 0;
- ret = 1;
- goto bail;
- }
- break;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * add_pkey - add the given PKEY to the hardware table
- * @dd: the infinipath device
- * @key: the PKEY
- *
- * Return an error code if unable to add the entry, zero if no change,
- * or 1 if the hardware PKEY register needs to be updated.
- */
-static int add_pkey(struct ipath_devdata *dd, u16 key)
-{
- int i;
- u16 lkey = key & 0x7FFF;
- int any = 0;
- int ret;
-
- if (lkey == 0x7FFF) {
- ret = 0;
- goto bail;
- }
-
- /* Look for an empty slot or a matching PKEY. */
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i]) {
- any++;
- continue;
- }
- /* If it matches exactly, try to increment the ref count */
- if (dd->ipath_pkeys[i] == key) {
- if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) {
- ret = 0;
- goto bail;
- }
- /* Lost the race. Look for an empty slot below. */
- atomic_dec(&dd->ipath_pkeyrefs[i]);
- any++;
- }
- /*
- * It makes no sense to have both the limited and unlimited
- * PKEY set at the same time since the unlimited one will
- * disable the limited one.
- */
- if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
- ret = -EEXIST;
- goto bail;
- }
- }
- if (!any) {
- ret = -EBUSY;
- goto bail;
- }
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i] &&
- atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
- /* for ipathstats, etc. */
- ipath_stats.sps_pkeys[i] = lkey;
- dd->ipath_pkeys[i] = key;
- ret = 1;
- goto bail;
- }
- }
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-/**
- * set_pkeys - set the PKEY table for port 0
- * @dd: the infinipath device
- * @pkeys: the PKEY table
- */
-static int set_pkeys(struct ipath_devdata *dd, u16 *pkeys, u8 port)
-{
- struct ipath_portdata *pd;
- int i;
- int changed = 0;
-
- /* always a kernel port, no locking needed */
- pd = dd->ipath_pd[0];
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- u16 key = pkeys[i];
- u16 okey = pd->port_pkeys[i];
-
- if (key == okey)
- continue;
- /*
- * The value of this PKEY table entry is changing.
- * Remove the old entry in the hardware's array of PKEYs.
- */
- if (okey & 0x7FFF)
- changed |= rm_pkey(dd, okey);
- if (key & 0x7FFF) {
- int ret = add_pkey(dd, key);
-
- if (ret < 0)
- key = 0;
- else
- changed |= ret;
- }
- pd->port_pkeys[i] = key;
- }
- if (changed) {
- u64 pkey;
- struct ib_event event;
-
- pkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(VERBOSE, "p0 new pkey reg %llx\n",
- (unsigned long long) pkey);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
- pkey);
-
- event.event = IB_EVENT_PKEY_CHANGE;
- event.device = &dd->verbs_dev->ibdev;
- event.element.port_num = port;
- ib_dispatch_event(&event);
- }
- return 0;
-}
-
-static int recv_subn_set_pkeytable(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
- __be16 *p = (__be16 *) smp->data;
- u16 *q = (u16 *) smp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- unsigned i, n = ipath_get_npkeys(dev->dd);
-
- for (i = 0; i < n; i++)
- q[i] = be16_to_cpu(p[i]);
-
- if (startpx != 0 || set_pkeys(dev->dd, q, port) != 0)
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return recv_subn_get_pkeytable(smp, ibdev);
-}
-
-static int recv_pma_get_classportinfo(struct ib_pma_mad *pmp)
-{
- struct ib_class_port_info *p =
- (struct ib_class_port_info *)pmp->data;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- if (pmp->mad_hdr.attr_mod != 0)
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- /* Indicate AllPortSelect is valid (only one port anyway) */
- p->capability_mask = cpu_to_be16(1 << 8);
- p->base_version = 1;
- p->class_version = 1;
- /*
- * Expected response time is 4.096 usec. * 2^18 == 1.073741824
- * sec.
- */
- p->resp_time_value = 18;
-
- return reply((struct ib_smp *) pmp);
-}
-
-/*
- * The PortSamplesControl.CounterMasks field is an array of 3 bit fields
- * which specify the N'th counter's capabilities. See ch. 16.1.3.2.
- * We support 5 counters which only count the mandatory quantities.
- */
-#define COUNTER_MASK(q, n) (q << ((9 - n) * 3))
-#define COUNTER_MASK0_9 cpu_to_be32(COUNTER_MASK(1, 0) | \
- COUNTER_MASK(1, 1) | \
- COUNTER_MASK(1, 2) | \
- COUNTER_MASK(1, 3) | \
- COUNTER_MASK(1, 4))
-
-static int recv_pma_get_portsamplescontrol(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portsamplescontrol *p =
- (struct ib_pma_portsamplescontrol *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- unsigned long flags;
- u8 port_select = p->port_select;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
- /*
- * Ticks are 10x the link transfer period which for 2.5Gbs is 4
- * nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample
- * intervals are counted in ticks. Since we use Linux timers, that
- * count in jiffies, we can't sample for less than 1000 ticks if HZ
- * == 1000 (4000 ticks if HZ is 250). link_speed_active returns 2 for
- * DDR, 1 for SDR, set the tick to 1 for DDR, 0 for SDR on chips that
- * have hardware support for delaying packets.
- */
- if (crp->cr_psstat)
- p->tick = dev->dd->ipath_link_speed_active - 1;
- else
- p->tick = 250; /* 1 usec. */
- p->counter_width = 4; /* 32 bit counters */
- p->counter_mask0_9 = COUNTER_MASK0_9;
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (crp->cr_psstat)
- p->sample_status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- p->sample_status = dev->pma_sample_status;
- p->sample_start = cpu_to_be32(dev->pma_sample_start);
- p->sample_interval = cpu_to_be32(dev->pma_sample_interval);
- p->tag = cpu_to_be16(dev->pma_tag);
- p->counter_select[0] = dev->pma_counter_select[0];
- p->counter_select[1] = dev->pma_counter_select[1];
- p->counter_select[2] = dev->pma_counter_select[2];
- p->counter_select[3] = dev->pma_counter_select[3];
- p->counter_select[4] = dev->pma_counter_select[4];
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_set_portsamplescontrol(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portsamplescontrol *p =
- (struct ib_pma_portsamplescontrol *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- unsigned long flags;
- u8 status;
- int ret;
-
- if (pmp->mad_hdr.attr_mod != 0 ||
- (p->port_select != port && p->port_select != 0xFF)) {
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- if (status == IB_PMA_SAMPLE_STATUS_DONE) {
- dev->pma_sample_start = be32_to_cpu(p->sample_start);
- dev->pma_sample_interval = be32_to_cpu(p->sample_interval);
- dev->pma_tag = be16_to_cpu(p->tag);
- dev->pma_counter_select[0] = p->counter_select[0];
- dev->pma_counter_select[1] = p->counter_select[1];
- dev->pma_counter_select[2] = p->counter_select[2];
- dev->pma_counter_select[3] = p->counter_select[3];
- dev->pma_counter_select[4] = p->counter_select[4];
- if (crp->cr_psstat) {
- ipath_write_creg(dev->dd, crp->cr_psinterval,
- dev->pma_sample_interval);
- ipath_write_creg(dev->dd, crp->cr_psstart,
- dev->pma_sample_start);
- } else
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port);
-
-bail:
- return ret;
-}
-
-static u64 get_counter(struct ipath_ibdev *dev,
- struct ipath_cregs const *crp,
- __be16 sel)
-{
- u64 ret;
-
- switch (sel) {
- case IB_PMA_PORT_XMIT_DATA:
- ret = (crp->cr_psxmitdatacount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitdatacount) :
- dev->ipath_sword;
- break;
- case IB_PMA_PORT_RCV_DATA:
- ret = (crp->cr_psrcvdatacount) ?
- ipath_read_creg32(dev->dd, crp->cr_psrcvdatacount) :
- dev->ipath_rword;
- break;
- case IB_PMA_PORT_XMIT_PKTS:
- ret = (crp->cr_psxmitpktscount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitpktscount) :
- dev->ipath_spkts;
- break;
- case IB_PMA_PORT_RCV_PKTS:
- ret = (crp->cr_psrcvpktscount) ?
- ipath_read_creg32(dev->dd, crp->cr_psrcvpktscount) :
- dev->ipath_rpkts;
- break;
- case IB_PMA_PORT_XMIT_WAIT:
- ret = (crp->cr_psxmitwaitcount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitwaitcount) :
- dev->ipath_xmit_wait;
- break;
- default:
- ret = 0;
- }
-
- return ret;
-}
-
-static int recv_pma_get_portsamplesresult(struct ib_pma_mad *pmp,
- struct ib_device *ibdev)
-{
- struct ib_pma_portsamplesresult *p =
- (struct ib_pma_portsamplesresult *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- u8 status;
- int i;
-
- memset(pmp->data, 0, sizeof(pmp->data));
- p->tag = cpu_to_be16(dev->pma_tag);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- p->sample_status = cpu_to_be16(status);
- for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
- p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
- cpu_to_be32(
- get_counter(dev, crp, dev->pma_counter_select[i]));
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portsamplesresult_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev)
-{
- struct ib_pma_portsamplesresult_ext *p =
- (struct ib_pma_portsamplesresult_ext *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- u8 status;
- int i;
-
- memset(pmp->data, 0, sizeof(pmp->data));
- p->tag = cpu_to_be16(dev->pma_tag);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- p->sample_status = cpu_to_be16(status);
- /* 64 bits */
- p->extended_width = cpu_to_be32(0x80000000);
- for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
- p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
- cpu_to_be64(
- get_counter(dev, crp, dev->pma_counter_select[i]));
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portcounters(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_verbs_counters cntrs;
- u8 port_select = p->port_select;
-
- ipath_get_counters(dev->dd, &cntrs);
-
- /* Adjust counters for any resets done. */
- cntrs.symbol_error_counter -= dev->z_symbol_error_counter;
- cntrs.link_error_recovery_counter -=
- dev->z_link_error_recovery_counter;
- cntrs.link_downed_counter -= dev->z_link_downed_counter;
- cntrs.port_rcv_errors += dev->rcv_errors;
- cntrs.port_rcv_errors -= dev->z_port_rcv_errors;
- cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors;
- cntrs.port_xmit_discards -= dev->z_port_xmit_discards;
- cntrs.port_xmit_data -= dev->z_port_xmit_data;
- cntrs.port_rcv_data -= dev->z_port_rcv_data;
- cntrs.port_xmit_packets -= dev->z_port_xmit_packets;
- cntrs.port_rcv_packets -= dev->z_port_rcv_packets;
- cntrs.local_link_integrity_errors -=
- dev->z_local_link_integrity_errors;
- cntrs.excessive_buffer_overrun_errors -=
- dev->z_excessive_buffer_overrun_errors;
- cntrs.vl15_dropped -= dev->z_vl15_dropped;
- cntrs.vl15_dropped += dev->n_vl15_dropped;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- if (cntrs.symbol_error_counter > 0xFFFFUL)
- p->symbol_error_counter = cpu_to_be16(0xFFFF);
- else
- p->symbol_error_counter =
- cpu_to_be16((u16)cntrs.symbol_error_counter);
- if (cntrs.link_error_recovery_counter > 0xFFUL)
- p->link_error_recovery_counter = 0xFF;
- else
- p->link_error_recovery_counter =
- (u8)cntrs.link_error_recovery_counter;
- if (cntrs.link_downed_counter > 0xFFUL)
- p->link_downed_counter = 0xFF;
- else
- p->link_downed_counter = (u8)cntrs.link_downed_counter;
- if (cntrs.port_rcv_errors > 0xFFFFUL)
- p->port_rcv_errors = cpu_to_be16(0xFFFF);
- else
- p->port_rcv_errors =
- cpu_to_be16((u16) cntrs.port_rcv_errors);
- if (cntrs.port_rcv_remphys_errors > 0xFFFFUL)
- p->port_rcv_remphys_errors = cpu_to_be16(0xFFFF);
- else
- p->port_rcv_remphys_errors =
- cpu_to_be16((u16)cntrs.port_rcv_remphys_errors);
- if (cntrs.port_xmit_discards > 0xFFFFUL)
- p->port_xmit_discards = cpu_to_be16(0xFFFF);
- else
- p->port_xmit_discards =
- cpu_to_be16((u16)cntrs.port_xmit_discards);
- if (cntrs.local_link_integrity_errors > 0xFUL)
- cntrs.local_link_integrity_errors = 0xFUL;
- if (cntrs.excessive_buffer_overrun_errors > 0xFUL)
- cntrs.excessive_buffer_overrun_errors = 0xFUL;
- p->link_overrun_errors = (cntrs.local_link_integrity_errors << 4) |
- cntrs.excessive_buffer_overrun_errors;
- if (cntrs.vl15_dropped > 0xFFFFUL)
- p->vl15_dropped = cpu_to_be16(0xFFFF);
- else
- p->vl15_dropped = cpu_to_be16((u16)cntrs.vl15_dropped);
- if (cntrs.port_xmit_data > 0xFFFFFFFFUL)
- p->port_xmit_data = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_xmit_data = cpu_to_be32((u32)cntrs.port_xmit_data);
- if (cntrs.port_rcv_data > 0xFFFFFFFFUL)
- p->port_rcv_data = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_rcv_data = cpu_to_be32((u32)cntrs.port_rcv_data);
- if (cntrs.port_xmit_packets > 0xFFFFFFFFUL)
- p->port_xmit_packets = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_xmit_packets =
- cpu_to_be32((u32)cntrs.port_xmit_packets);
- if (cntrs.port_rcv_packets > 0xFFFFFFFFUL)
- p->port_rcv_packets = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_rcv_packets =
- cpu_to_be32((u32) cntrs.port_rcv_packets);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portcounters_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters_ext *p =
- (struct ib_pma_portcounters_ext *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- u64 swords, rwords, spkts, rpkts, xwait;
- u8 port_select = p->port_select;
-
- ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
- &rpkts, &xwait);
-
- /* Adjust counters for any resets done. */
- swords -= dev->z_port_xmit_data;
- rwords -= dev->z_port_rcv_data;
- spkts -= dev->z_port_xmit_packets;
- rpkts -= dev->z_port_rcv_packets;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- p->port_xmit_data = cpu_to_be64(swords);
- p->port_rcv_data = cpu_to_be64(rwords);
- p->port_xmit_packets = cpu_to_be64(spkts);
- p->port_rcv_packets = cpu_to_be64(rpkts);
- p->port_unicast_xmit_packets = cpu_to_be64(dev->n_unicast_xmit);
- p->port_unicast_rcv_packets = cpu_to_be64(dev->n_unicast_rcv);
- p->port_multicast_xmit_packets = cpu_to_be64(dev->n_multicast_xmit);
- p->port_multicast_rcv_packets = cpu_to_be64(dev->n_multicast_rcv);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_set_portcounters(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_verbs_counters cntrs;
-
- /*
- * Since the HW doesn't support clearing counters, we save the
- * current count and subtract it from future responses.
- */
- ipath_get_counters(dev->dd, &cntrs);
-
- if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR)
- dev->z_symbol_error_counter = cntrs.symbol_error_counter;
-
- if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY)
- dev->z_link_error_recovery_counter =
- cntrs.link_error_recovery_counter;
-
- if (p->counter_select & IB_PMA_SEL_LINK_DOWNED)
- dev->z_link_downed_counter = cntrs.link_downed_counter;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS)
- dev->z_port_rcv_errors =
- cntrs.port_rcv_errors + dev->rcv_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS)
- dev->z_port_rcv_remphys_errors =
- cntrs.port_rcv_remphys_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS)
- dev->z_port_xmit_discards = cntrs.port_xmit_discards;
-
- if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS)
- dev->z_local_link_integrity_errors =
- cntrs.local_link_integrity_errors;
-
- if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS)
- dev->z_excessive_buffer_overrun_errors =
- cntrs.excessive_buffer_overrun_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) {
- dev->n_vl15_dropped = 0;
- dev->z_vl15_dropped = cntrs.vl15_dropped;
- }
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA)
- dev->z_port_xmit_data = cntrs.port_xmit_data;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA)
- dev->z_port_rcv_data = cntrs.port_rcv_data;
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS)
- dev->z_port_xmit_packets = cntrs.port_xmit_packets;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS)
- dev->z_port_rcv_packets = cntrs.port_rcv_packets;
-
- return recv_pma_get_portcounters(pmp, ibdev, port);
-}
-
-static int recv_pma_set_portcounters_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- u64 swords, rwords, spkts, rpkts, xwait;
-
- ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
- &rpkts, &xwait);
-
- if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA)
- dev->z_port_xmit_data = swords;
-
- if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA)
- dev->z_port_rcv_data = rwords;
-
- if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS)
- dev->z_port_xmit_packets = spkts;
-
- if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS)
- dev->z_port_rcv_packets = rpkts;
-
- if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS)
- dev->n_unicast_xmit = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_UNI_RCV_PACKETS)
- dev->n_unicast_rcv = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS)
- dev->n_multicast_xmit = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_MULTI_RCV_PACKETS)
- dev->n_multicast_rcv = 0;
-
- return recv_pma_get_portcounters_ext(pmp, ibdev, port);
-}
-
-static int process_subn(struct ib_device *ibdev, int mad_flags,
- u8 port_num, const struct ib_mad *in_mad,
- struct ib_mad *out_mad)
-{
- struct ib_smp *smp = (struct ib_smp *)out_mad;
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- *out_mad = *in_mad;
- if (smp->class_version != 1) {
- smp->status |= IB_SMP_UNSUP_VERSION;
- ret = reply(smp);
- goto bail;
- }
-
- /* Is the mkey in the process of expiring? */
- if (dev->mkey_lease_timeout &&
- time_after_eq(jiffies, dev->mkey_lease_timeout)) {
- /* Clear timeout and mkey protection field. */
- dev->mkey_lease_timeout = 0;
- dev->mkeyprot = 0;
- }
-
- /*
- * M_Key checking depends on
- * Portinfo:M_Key_protect_bits
- */
- if ((mad_flags & IB_MAD_IGNORE_MKEY) == 0 && dev->mkey != 0 &&
- dev->mkey != smp->mkey &&
- (smp->method == IB_MGMT_METHOD_SET ||
- (smp->method == IB_MGMT_METHOD_GET &&
- dev->mkeyprot >= 2))) {
- if (dev->mkey_violations != 0xFFFF)
- ++dev->mkey_violations;
- if (dev->mkey_lease_timeout ||
- dev->mkey_lease_period == 0) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- dev->mkey_lease_timeout = jiffies +
- dev->mkey_lease_period * HZ;
- /* Future: Generate a trap notice. */
- ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
- goto bail;
- } else if (dev->mkey_lease_timeout)
- dev->mkey_lease_timeout = 0;
-
- switch (smp->method) {
- case IB_MGMT_METHOD_GET:
- switch (smp->attr_id) {
- case IB_SMP_ATTR_NODE_DESC:
- ret = recv_subn_get_nodedescription(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_NODE_INFO:
- ret = recv_subn_get_nodeinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_GUID_INFO:
- ret = recv_subn_get_guidinfo(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_PORT_INFO:
- ret = recv_subn_get_portinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_PKEY_TABLE:
- ret = recv_subn_get_pkeytable(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_SM_INFO:
- if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- if (dev->port_cap_flags & IB_PORT_SM) {
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- }
- /* FALLTHROUGH */
- default:
- smp->status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply(smp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_SET:
- switch (smp->attr_id) {
- case IB_SMP_ATTR_GUID_INFO:
- ret = recv_subn_set_guidinfo(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_PORT_INFO:
- ret = recv_subn_set_portinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_PKEY_TABLE:
- ret = recv_subn_set_pkeytable(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_SM_INFO:
- if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- if (dev->port_cap_flags & IB_PORT_SM) {
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- }
- /* FALLTHROUGH */
- default:
- smp->status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply(smp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_TRAP:
- case IB_MGMT_METHOD_REPORT:
- case IB_MGMT_METHOD_REPORT_RESP:
- case IB_MGMT_METHOD_TRAP_REPRESS:
- case IB_MGMT_METHOD_GET_RESP:
- /*
- * The ib_mad module will call us to process responses
- * before checking for other consumers.
- * Just tell the caller to process it normally.
- */
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- default:
- smp->status |= IB_SMP_UNSUP_METHOD;
- ret = reply(smp);
- }
-
-bail:
- return ret;
-}
-
-static int process_perf(struct ib_device *ibdev, u8 port_num,
- const struct ib_mad *in_mad,
- struct ib_mad *out_mad)
-{
- struct ib_pma_mad *pmp = (struct ib_pma_mad *)out_mad;
- int ret;
-
- *out_mad = *in_mad;
- if (pmp->mad_hdr.class_version != 1) {
- pmp->mad_hdr.status |= IB_SMP_UNSUP_VERSION;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- switch (pmp->mad_hdr.method) {
- case IB_MGMT_METHOD_GET:
- switch (pmp->mad_hdr.attr_id) {
- case IB_PMA_CLASS_PORT_INFO:
- ret = recv_pma_get_classportinfo(pmp);
- goto bail;
- case IB_PMA_PORT_SAMPLES_CONTROL:
- ret = recv_pma_get_portsamplescontrol(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_SAMPLES_RESULT:
- ret = recv_pma_get_portsamplesresult(pmp, ibdev);
- goto bail;
- case IB_PMA_PORT_SAMPLES_RESULT_EXT:
- ret = recv_pma_get_portsamplesresult_ext(pmp,
- ibdev);
- goto bail;
- case IB_PMA_PORT_COUNTERS:
- ret = recv_pma_get_portcounters(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS_EXT:
- ret = recv_pma_get_portcounters_ext(pmp, ibdev,
- port_num);
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_SET:
- switch (pmp->mad_hdr.attr_id) {
- case IB_PMA_PORT_SAMPLES_CONTROL:
- ret = recv_pma_set_portsamplescontrol(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS:
- ret = recv_pma_set_portcounters(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS_EXT:
- ret = recv_pma_set_portcounters_ext(pmp, ibdev,
- port_num);
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_GET_RESP:
- /*
- * The ib_mad module will call us to process responses
- * before checking for other consumers.
- * Just tell the caller to process it normally.
- */
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METHOD;
- ret = reply((struct ib_smp *) pmp);
- }
-
-bail:
- return ret;
-}
-
-/**
- * ipath_process_mad - process an incoming MAD packet
- * @ibdev: the infiniband device this packet came in on
- * @mad_flags: MAD flags
- * @port_num: the port number this packet came in on
- * @in_wc: the work completion entry for this packet
- * @in_grh: the global route header for this packet
- * @in_mad: the incoming MAD
- * @out_mad: any outgoing MAD reply
- *
- * Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not
- * interested in processing.
- *
- * Note that the verbs framework has already done the MAD sanity checks,
- * and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE
- * MADs.
- *
- * This is called by the ib_mad module.
- */
-int ipath_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
- const struct ib_wc *in_wc, const struct ib_grh *in_grh,
- const struct ib_mad_hdr *in, size_t in_mad_size,
- struct ib_mad_hdr *out, size_t *out_mad_size,
- u16 *out_mad_pkey_index)
-{
- int ret;
- const struct ib_mad *in_mad = (const struct ib_mad *)in;
- struct ib_mad *out_mad = (struct ib_mad *)out;
-
- if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
- *out_mad_size != sizeof(*out_mad)))
- return IB_MAD_RESULT_FAILURE;
-
- switch (in_mad->mad_hdr.mgmt_class) {
- case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
- case IB_MGMT_CLASS_SUBN_LID_ROUTED:
- ret = process_subn(ibdev, mad_flags, port_num,
- in_mad, out_mad);
- goto bail;
- case IB_MGMT_CLASS_PERF_MGMT:
- ret = process_perf(ibdev, port_num, in_mad, out_mad);
- goto bail;
- default:
- ret = IB_MAD_RESULT_SUCCESS;
- }
-
-bail:
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_mmap.c b/drivers/staging/rdma/ipath/ipath_mmap.c
deleted file mode 100644
index e732742..0000000
--- a/drivers/staging/rdma/ipath/ipath_mmap.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <asm/pgtable.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_release_mmap_info - free mmap info structure
- * @ref: a pointer to the kref within struct ipath_mmap_info
- */
-void ipath_release_mmap_info(struct kref *ref)
-{
- struct ipath_mmap_info *ip =
- container_of(ref, struct ipath_mmap_info, ref);
- struct ipath_ibdev *dev = to_idev(ip->context->device);
-
- spin_lock_irq(&dev->pending_lock);
- list_del(&ip->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
-
- vfree(ip->obj);
- kfree(ip);
-}
-
-/*
- * open and close keep track of how many times the CQ is mapped,
- * to avoid releasing it.
- */
-static void ipath_vma_open(struct vm_area_struct *vma)
-{
- struct ipath_mmap_info *ip = vma->vm_private_data;
-
- kref_get(&ip->ref);
-}
-
-static void ipath_vma_close(struct vm_area_struct *vma)
-{
- struct ipath_mmap_info *ip = vma->vm_private_data;
-
- kref_put(&ip->ref, ipath_release_mmap_info);
-}
-
-static const struct vm_operations_struct ipath_vm_ops = {
- .open = ipath_vma_open,
- .close = ipath_vma_close,
-};
-
-/**
- * ipath_mmap - create a new mmap region
- * @context: the IB user context of the process making the mmap() call
- * @vma: the VMA to be initialized
- * Return zero if the mmap is OK. Otherwise, return an errno.
- */
-int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
-{
- struct ipath_ibdev *dev = to_idev(context->device);
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
- unsigned long size = vma->vm_end - vma->vm_start;
- struct ipath_mmap_info *ip, *pp;
- int ret = -EINVAL;
-
- /*
- * Search the device's list of objects waiting for a mmap call.
- * Normally, this list is very short since a call to create a
- * CQ, QP, or SRQ is soon followed by a call to mmap().
- */
- spin_lock_irq(&dev->pending_lock);
- list_for_each_entry_safe(ip, pp, &dev->pending_mmaps,
- pending_mmaps) {
- /* Only the creator is allowed to mmap the object */
- if (context != ip->context || (__u64) offset != ip->offset)
- continue;
- /* Don't allow a mmap larger than the object. */
- if (size > ip->size)
- break;
-
- list_del_init(&ip->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
-
- ret = remap_vmalloc_range(vma, ip->obj, 0);
- if (ret)
- goto done;
- vma->vm_ops = &ipath_vm_ops;
- vma->vm_private_data = ip;
- ipath_vma_open(vma);
- goto done;
- }
- spin_unlock_irq(&dev->pending_lock);
-done:
- return ret;
-}
-
-/*
- * Allocate information for ipath_mmap
- */
-struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
- u32 size,
- struct ib_ucontext *context,
- void *obj) {
- struct ipath_mmap_info *ip;
-
- ip = kmalloc(sizeof *ip, GFP_KERNEL);
- if (!ip)
- goto bail;
-
- size = PAGE_ALIGN(size);
-
- spin_lock_irq(&dev->mmap_offset_lock);
- if (dev->mmap_offset == 0)
- dev->mmap_offset = PAGE_SIZE;
- ip->offset = dev->mmap_offset;
- dev->mmap_offset += size;
- spin_unlock_irq(&dev->mmap_offset_lock);
-
- INIT_LIST_HEAD(&ip->pending_mmaps);
- ip->size = size;
- ip->context = context;
- ip->obj = obj;
- kref_init(&ip->ref);
-
-bail:
- return ip;
-}
-
-void ipath_update_mmap_info(struct ipath_ibdev *dev,
- struct ipath_mmap_info *ip,
- u32 size, void *obj) {
- size = PAGE_ALIGN(size);
-
- spin_lock_irq(&dev->mmap_offset_lock);
- if (dev->mmap_offset == 0)
- dev->mmap_offset = PAGE_SIZE;
- ip->offset = dev->mmap_offset;
- dev->mmap_offset += size;
- spin_unlock_irq(&dev->mmap_offset_lock);
-
- ip->size = size;
- ip->obj = obj;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_mr.c b/drivers/staging/rdma/ipath/ipath_mr.c
deleted file mode 100644
index b76b0ce..0000000
--- a/drivers/staging/rdma/ipath/ipath_mr.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/slab.h>
-
-#include <rdma/ib_umem.h>
-#include <rdma/ib_pack.h>
-#include <rdma/ib_smi.h>
-
-#include "ipath_verbs.h"
-
-/* Fast memory region */
-struct ipath_fmr {
- struct ib_fmr ibfmr;
- u8 page_shift;
- struct ipath_mregion mr; /* must be last */
-};
-
-static inline struct ipath_fmr *to_ifmr(struct ib_fmr *ibfmr)
-{
- return container_of(ibfmr, struct ipath_fmr, ibfmr);
-}
-
-/**
- * ipath_get_dma_mr - get a DMA memory region
- * @pd: protection domain for this memory region
- * @acc: access flags
- *
- * Returns the memory region on success, otherwise returns an errno.
- * Note that all DMA addresses should be created via the
- * struct ib_dma_mapping_ops functions (see ipath_dma.c).
- */
-struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc)
-{
- struct ipath_mr *mr;
- struct ib_mr *ret;
-
- mr = kzalloc(sizeof *mr, GFP_KERNEL);
- if (!mr) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- mr->mr.access_flags = acc;
- ret = &mr->ibmr;
-
-bail:
- return ret;
-}
-
-static struct ipath_mr *alloc_mr(int count,
- struct ipath_lkey_table *lk_table)
-{
- struct ipath_mr *mr;
- int m, i = 0;
-
- /* Allocate struct plus pointers to first level page tables. */
- m = (count + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
- mr = kmalloc(sizeof *mr + m * sizeof mr->mr.map[0], GFP_KERNEL);
- if (!mr)
- goto done;
-
- /* Allocate first level page tables. */
- for (; i < m; i++) {
- mr->mr.map[i] = kmalloc(sizeof *mr->mr.map[0], GFP_KERNEL);
- if (!mr->mr.map[i])
- goto bail;
- }
- mr->mr.mapsz = m;
-
- if (!ipath_alloc_lkey(lk_table, &mr->mr))
- goto bail;
- mr->ibmr.rkey = mr->ibmr.lkey = mr->mr.lkey;
-
- goto done;
-
-bail:
- while (i) {
- i--;
- kfree(mr->mr.map[i]);
- }
- kfree(mr);
- mr = NULL;
-
-done:
- return mr;
-}
-
-/**
- * ipath_reg_user_mr - register a userspace memory region
- * @pd: protection domain for this memory region
- * @start: starting userspace address
- * @length: length of region to register
- * @virt_addr: virtual address to use (from HCA's point of view)
- * @mr_access_flags: access flags for this memory region
- * @udata: unused by the InfiniPath driver
- *
- * Returns the memory region on success, otherwise returns an errno.
- */
-struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
- u64 virt_addr, int mr_access_flags,
- struct ib_udata *udata)
-{
- struct ipath_mr *mr;
- struct ib_umem *umem;
- int n, m, entry;
- struct scatterlist *sg;
- struct ib_mr *ret;
-
- if (length == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- umem = ib_umem_get(pd->uobject->context, start, length,
- mr_access_flags, 0);
- if (IS_ERR(umem))
- return (void *) umem;
-
- n = umem->nmap;
- mr = alloc_mr(n, &to_idev(pd->device)->lk_table);
- if (!mr) {
- ret = ERR_PTR(-ENOMEM);
- ib_umem_release(umem);
- goto bail;
- }
-
- mr->mr.pd = pd;
- mr->mr.user_base = start;
- mr->mr.iova = virt_addr;
- mr->mr.length = length;
- mr->mr.offset = ib_umem_offset(umem);
- mr->mr.access_flags = mr_access_flags;
- mr->mr.max_segs = n;
- mr->umem = umem;
-
- m = 0;
- n = 0;
- for_each_sg(umem->sg_head.sgl, sg, umem->nmap, entry) {
- void *vaddr;
-
- vaddr = page_address(sg_page(sg));
- if (!vaddr) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- mr->mr.map[m]->segs[n].vaddr = vaddr;
- mr->mr.map[m]->segs[n].length = umem->page_size;
- n++;
- if (n == IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- ret = &mr->ibmr;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_dereg_mr - unregister and free a memory region
- * @ibmr: the memory region to free
- *
- * Returns 0 on success.
- *
- * Note that this is called to free MRs created by ipath_get_dma_mr()
- * or ipath_reg_user_mr().
- */
-int ipath_dereg_mr(struct ib_mr *ibmr)
-{
- struct ipath_mr *mr = to_imr(ibmr);
- int i;
-
- ipath_free_lkey(&to_idev(ibmr->device)->lk_table, ibmr->lkey);
- i = mr->mr.mapsz;
- while (i) {
- i--;
- kfree(mr->mr.map[i]);
- }
-
- if (mr->umem)
- ib_umem_release(mr->umem);
-
- kfree(mr);
- return 0;
-}
-
-/**
- * ipath_alloc_fmr - allocate a fast memory region
- * @pd: the protection domain for this memory region
- * @mr_access_flags: access flags for this memory region
- * @fmr_attr: fast memory region attributes
- *
- * Returns the memory region on success, otherwise returns an errno.
- */
-struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
- struct ib_fmr_attr *fmr_attr)
-{
- struct ipath_fmr *fmr;
- int m, i = 0;
- struct ib_fmr *ret;
-
- /* Allocate struct plus pointers to first level page tables. */
- m = (fmr_attr->max_pages + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
- fmr = kmalloc(sizeof *fmr + m * sizeof fmr->mr.map[0], GFP_KERNEL);
- if (!fmr)
- goto bail;
-
- /* Allocate first level page tables. */
- for (; i < m; i++) {
- fmr->mr.map[i] = kmalloc(sizeof *fmr->mr.map[0],
- GFP_KERNEL);
- if (!fmr->mr.map[i])
- goto bail;
- }
- fmr->mr.mapsz = m;
-
- /*
- * ib_alloc_fmr() will initialize fmr->ibfmr except for lkey &
- * rkey.
- */
- if (!ipath_alloc_lkey(&to_idev(pd->device)->lk_table, &fmr->mr))
- goto bail;
- fmr->ibfmr.rkey = fmr->ibfmr.lkey = fmr->mr.lkey;
- /*
- * Resources are allocated but no valid mapping (RKEY can't be
- * used).
- */
- fmr->mr.pd = pd;
- fmr->mr.user_base = 0;
- fmr->mr.iova = 0;
- fmr->mr.length = 0;
- fmr->mr.offset = 0;
- fmr->mr.access_flags = mr_access_flags;
- fmr->mr.max_segs = fmr_attr->max_pages;
- fmr->page_shift = fmr_attr->page_shift;
-
- ret = &fmr->ibfmr;
- goto done;
-
-bail:
- while (i)
- kfree(fmr->mr.map[--i]);
- kfree(fmr);
- ret = ERR_PTR(-ENOMEM);
-
-done:
- return ret;
-}
-
-/**
- * ipath_map_phys_fmr - set up a fast memory region
- * @ibmfr: the fast memory region to set up
- * @page_list: the list of pages to associate with the fast memory region
- * @list_len: the number of pages to associate with the fast memory region
- * @iova: the virtual address of the start of the fast memory region
- *
- * This may be called from interrupt context.
- */
-
-int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
- int list_len, u64 iova)
-{
- struct ipath_fmr *fmr = to_ifmr(ibfmr);
- struct ipath_lkey_table *rkt;
- unsigned long flags;
- int m, n, i;
- u32 ps;
- int ret;
-
- if (list_len > fmr->mr.max_segs) {
- ret = -EINVAL;
- goto bail;
- }
- rkt = &to_idev(ibfmr->device)->lk_table;
- spin_lock_irqsave(&rkt->lock, flags);
- fmr->mr.user_base = iova;
- fmr->mr.iova = iova;
- ps = 1 << fmr->page_shift;
- fmr->mr.length = list_len * ps;
- m = 0;
- n = 0;
- ps = 1 << fmr->page_shift;
- for (i = 0; i < list_len; i++) {
- fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i];
- fmr->mr.map[m]->segs[n].length = ps;
- if (++n == IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- spin_unlock_irqrestore(&rkt->lock, flags);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_unmap_fmr - unmap fast memory regions
- * @fmr_list: the list of fast memory regions to unmap
- *
- * Returns 0 on success.
- */
-int ipath_unmap_fmr(struct list_head *fmr_list)
-{
- struct ipath_fmr *fmr;
- struct ipath_lkey_table *rkt;
- unsigned long flags;
-
- list_for_each_entry(fmr, fmr_list, ibfmr.list) {
- rkt = &to_idev(fmr->ibfmr.device)->lk_table;
- spin_lock_irqsave(&rkt->lock, flags);
- fmr->mr.user_base = 0;
- fmr->mr.iova = 0;
- fmr->mr.length = 0;
- spin_unlock_irqrestore(&rkt->lock, flags);
- }
- return 0;
-}
-
-/**
- * ipath_dealloc_fmr - deallocate a fast memory region
- * @ibfmr: the fast memory region to deallocate
- *
- * Returns 0 on success.
- */
-int ipath_dealloc_fmr(struct ib_fmr *ibfmr)
-{
- struct ipath_fmr *fmr = to_ifmr(ibfmr);
- int i;
-
- ipath_free_lkey(&to_idev(ibfmr->device)->lk_table, ibfmr->lkey);
- i = fmr->mr.mapsz;
- while (i)
- kfree(fmr->mr.map[--i]);
- kfree(fmr);
- return 0;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_qp.c b/drivers/staging/rdma/ipath/ipath_qp.c
deleted file mode 100644
index 280cd2d..0000000
--- a/drivers/staging/rdma/ipath/ipath_qp.c
+++ /dev/null
@@ -1,1079 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE)
-#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1)
-#define mk_qpn(qpt, map, off) (((map) - (qpt)->map) * BITS_PER_PAGE + \
- (off))
-#define find_next_offset(map, off) find_next_zero_bit((map)->page, \
- BITS_PER_PAGE, off)
-
-/*
- * Convert the AETH credit code into the number of credits.
- */
-static u32 credit_table[31] = {
- 0, /* 0 */
- 1, /* 1 */
- 2, /* 2 */
- 3, /* 3 */
- 4, /* 4 */
- 6, /* 5 */
- 8, /* 6 */
- 12, /* 7 */
- 16, /* 8 */
- 24, /* 9 */
- 32, /* A */
- 48, /* B */
- 64, /* C */
- 96, /* D */
- 128, /* E */
- 192, /* F */
- 256, /* 10 */
- 384, /* 11 */
- 512, /* 12 */
- 768, /* 13 */
- 1024, /* 14 */
- 1536, /* 15 */
- 2048, /* 16 */
- 3072, /* 17 */
- 4096, /* 18 */
- 6144, /* 19 */
- 8192, /* 1A */
- 12288, /* 1B */
- 16384, /* 1C */
- 24576, /* 1D */
- 32768 /* 1E */
-};
-
-
-static void get_map_page(struct ipath_qp_table *qpt, struct qpn_map *map)
-{
- unsigned long page = get_zeroed_page(GFP_KERNEL);
- unsigned long flags;
-
- /*
- * Free the page if someone raced with us installing it.
- */
-
- spin_lock_irqsave(&qpt->lock, flags);
- if (map->page)
- free_page(page);
- else
- map->page = (void *)page;
- spin_unlock_irqrestore(&qpt->lock, flags);
-}
-
-
-static int alloc_qpn(struct ipath_qp_table *qpt, enum ib_qp_type type)
-{
- u32 i, offset, max_scan, qpn;
- struct qpn_map *map;
- u32 ret = -1;
-
- if (type == IB_QPT_SMI)
- ret = 0;
- else if (type == IB_QPT_GSI)
- ret = 1;
-
- if (ret != -1) {
- map = &qpt->map[0];
- if (unlikely(!map->page)) {
- get_map_page(qpt, map);
- if (unlikely(!map->page)) {
- ret = -ENOMEM;
- goto bail;
- }
- }
- if (!test_and_set_bit(ret, map->page))
- atomic_dec(&map->n_free);
- else
- ret = -EBUSY;
- goto bail;
- }
-
- qpn = qpt->last + 1;
- if (qpn >= QPN_MAX)
- qpn = 2;
- offset = qpn & BITS_PER_PAGE_MASK;
- map = &qpt->map[qpn / BITS_PER_PAGE];
- max_scan = qpt->nmaps - !offset;
- for (i = 0;;) {
- if (unlikely(!map->page)) {
- get_map_page(qpt, map);
- if (unlikely(!map->page))
- break;
- }
- if (likely(atomic_read(&map->n_free))) {
- do {
- if (!test_and_set_bit(offset, map->page)) {
- atomic_dec(&map->n_free);
- qpt->last = qpn;
- ret = qpn;
- goto bail;
- }
- offset = find_next_offset(map, offset);
- qpn = mk_qpn(qpt, map, offset);
- /*
- * This test differs from alloc_pidmap().
- * If find_next_offset() does find a zero
- * bit, we don't need to check for QPN
- * wrapping around past our starting QPN.
- * We just need to be sure we don't loop
- * forever.
- */
- } while (offset < BITS_PER_PAGE && qpn < QPN_MAX);
- }
- /*
- * In order to keep the number of pages allocated to a
- * minimum, we scan the all existing pages before increasing
- * the size of the bitmap table.
- */
- if (++i > max_scan) {
- if (qpt->nmaps == QPNMAP_ENTRIES)
- break;
- map = &qpt->map[qpt->nmaps++];
- offset = 0;
- } else if (map < &qpt->map[qpt->nmaps]) {
- ++map;
- offset = 0;
- } else {
- map = &qpt->map[0];
- offset = 2;
- }
- qpn = mk_qpn(qpt, map, offset);
- }
-
- ret = -ENOMEM;
-
-bail:
- return ret;
-}
-
-static void free_qpn(struct ipath_qp_table *qpt, u32 qpn)
-{
- struct qpn_map *map;
-
- map = qpt->map + qpn / BITS_PER_PAGE;
- if (map->page)
- clear_bit(qpn & BITS_PER_PAGE_MASK, map->page);
- atomic_inc(&map->n_free);
-}
-
-/**
- * ipath_alloc_qpn - allocate a QP number
- * @qpt: the QP table
- * @qp: the QP
- * @type: the QP type (IB_QPT_SMI and IB_QPT_GSI are special)
- *
- * Allocate the next available QPN and put the QP into the hash table.
- * The hash table holds a reference to the QP.
- */
-static int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
- enum ib_qp_type type)
-{
- unsigned long flags;
- int ret;
-
- ret = alloc_qpn(qpt, type);
- if (ret < 0)
- goto bail;
- qp->ibqp.qp_num = ret;
-
- /* Add the QP to the hash table. */
- spin_lock_irqsave(&qpt->lock, flags);
-
- ret %= qpt->max;
- qp->next = qpt->table[ret];
- qpt->table[ret] = qp;
- atomic_inc(&qp->refcount);
-
- spin_unlock_irqrestore(&qpt->lock, flags);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_free_qp - remove a QP from the QP table
- * @qpt: the QP table
- * @qp: the QP to remove
- *
- * Remove the QP from the table so it can't be found asynchronously by
- * the receive interrupt routine.
- */
-static void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
-{
- struct ipath_qp *q, **qpp;
- unsigned long flags;
-
- spin_lock_irqsave(&qpt->lock, flags);
-
- /* Remove QP from the hash table. */
- qpp = &qpt->table[qp->ibqp.qp_num % qpt->max];
- for (; (q = *qpp) != NULL; qpp = &q->next) {
- if (q == qp) {
- *qpp = qp->next;
- qp->next = NULL;
- atomic_dec(&qp->refcount);
- break;
- }
- }
-
- spin_unlock_irqrestore(&qpt->lock, flags);
-}
-
-/**
- * ipath_free_all_qps - check for QPs still in use
- * @qpt: the QP table to empty
- *
- * There should not be any QPs still in use.
- * Free memory for table.
- */
-unsigned ipath_free_all_qps(struct ipath_qp_table *qpt)
-{
- unsigned long flags;
- struct ipath_qp *qp;
- u32 n, qp_inuse = 0;
-
- spin_lock_irqsave(&qpt->lock, flags);
- for (n = 0; n < qpt->max; n++) {
- qp = qpt->table[n];
- qpt->table[n] = NULL;
-
- for (; qp; qp = qp->next)
- qp_inuse++;
- }
- spin_unlock_irqrestore(&qpt->lock, flags);
-
- for (n = 0; n < ARRAY_SIZE(qpt->map); n++)
- if (qpt->map[n].page)
- free_page((unsigned long) qpt->map[n].page);
- return qp_inuse;
-}
-
-/**
- * ipath_lookup_qpn - return the QP with the given QPN
- * @qpt: the QP table
- * @qpn: the QP number to look up
- *
- * The caller is responsible for decrementing the QP reference count
- * when done.
- */
-struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn)
-{
- unsigned long flags;
- struct ipath_qp *qp;
-
- spin_lock_irqsave(&qpt->lock, flags);
-
- for (qp = qpt->table[qpn % qpt->max]; qp; qp = qp->next) {
- if (qp->ibqp.qp_num == qpn) {
- atomic_inc(&qp->refcount);
- break;
- }
- }
-
- spin_unlock_irqrestore(&qpt->lock, flags);
- return qp;
-}
-
-/**
- * ipath_reset_qp - initialize the QP state to the reset state
- * @qp: the QP to reset
- * @type: the QP type
- */
-static void ipath_reset_qp(struct ipath_qp *qp, enum ib_qp_type type)
-{
- qp->remote_qpn = 0;
- qp->qkey = 0;
- qp->qp_access_flags = 0;
- atomic_set(&qp->s_dma_busy, 0);
- qp->s_flags &= IPATH_S_SIGNAL_REQ_WR;
- qp->s_hdrwords = 0;
- qp->s_wqe = NULL;
- qp->s_pkt_delay = 0;
- qp->s_draining = 0;
- qp->s_psn = 0;
- qp->r_psn = 0;
- qp->r_msn = 0;
- if (type == IB_QPT_RC) {
- qp->s_state = IB_OPCODE_RC_SEND_LAST;
- qp->r_state = IB_OPCODE_RC_SEND_LAST;
- } else {
- qp->s_state = IB_OPCODE_UC_SEND_LAST;
- qp->r_state = IB_OPCODE_UC_SEND_LAST;
- }
- qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
- qp->r_nak_state = 0;
- qp->r_aflags = 0;
- qp->r_flags = 0;
- qp->s_rnr_timeout = 0;
- qp->s_head = 0;
- qp->s_tail = 0;
- qp->s_cur = 0;
- qp->s_last = 0;
- qp->s_ssn = 1;
- qp->s_lsn = 0;
- memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue));
- qp->r_head_ack_queue = 0;
- qp->s_tail_ack_queue = 0;
- qp->s_num_rd_atomic = 0;
- if (qp->r_rq.wq) {
- qp->r_rq.wq->head = 0;
- qp->r_rq.wq->tail = 0;
- }
-}
-
-/**
- * ipath_error_qp - put a QP into the error state
- * @qp: the QP to put into the error state
- * @err: the receive completion error to signal if a RWQE is active
- *
- * Flushes both send and receive work queues.
- * Returns true if last WQE event should be generated.
- * The QP s_lock should be held and interrupts disabled.
- * If we are already in error state, just return.
- */
-
-int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ib_wc wc;
- int ret = 0;
-
- if (qp->state == IB_QPS_ERR)
- goto bail;
-
- qp->state = IB_QPS_ERR;
-
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
-
- /* Schedule the sending tasklet to drain the send work queue. */
- if (qp->s_last != qp->s_head)
- ipath_schedule_send(qp);
-
- memset(&wc, 0, sizeof(wc));
- wc.qp = &qp->ibqp;
- wc.opcode = IB_WC_RECV;
-
- if (test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags)) {
- wc.wr_id = qp->r_wr_id;
- wc.status = err;
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- }
- wc.status = IB_WC_WR_FLUSH_ERR;
-
- if (qp->r_rq.wq) {
- struct ipath_rwq *wq;
- u32 head;
- u32 tail;
-
- spin_lock(&qp->r_rq.lock);
-
- /* sanity check pointers before trusting them */
- wq = qp->r_rq.wq;
- head = wq->head;
- if (head >= qp->r_rq.size)
- head = 0;
- tail = wq->tail;
- if (tail >= qp->r_rq.size)
- tail = 0;
- while (tail != head) {
- wc.wr_id = get_rwqe_ptr(&qp->r_rq, tail)->wr_id;
- if (++tail >= qp->r_rq.size)
- tail = 0;
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- }
- wq->tail = tail;
-
- spin_unlock(&qp->r_rq.lock);
- } else if (qp->ibqp.event_handler)
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_modify_qp - modify the attributes of a queue pair
- * @ibqp: the queue pair who's attributes we're modifying
- * @attr: the new attributes
- * @attr_mask: the mask of attributes to modify
- * @udata: user data for ipathverbs.so
- *
- * Returns 0 on success, otherwise returns an errno.
- */
-int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_qp *qp = to_iqp(ibqp);
- enum ib_qp_state cur_state, new_state;
- int lastwqe = 0;
- int ret;
-
- spin_lock_irq(&qp->s_lock);
-
- cur_state = attr_mask & IB_QP_CUR_STATE ?
- attr->cur_qp_state : qp->state;
- new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
-
- if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type,
- attr_mask, IB_LINK_LAYER_UNSPECIFIED))
- goto inval;
-
- if (attr_mask & IB_QP_AV) {
- if (attr->ah_attr.dlid == 0 ||
- attr->ah_attr.dlid >= IPATH_MULTICAST_LID_BASE)
- goto inval;
-
- if ((attr->ah_attr.ah_flags & IB_AH_GRH) &&
- (attr->ah_attr.grh.sgid_index > 1))
- goto inval;
- }
-
- if (attr_mask & IB_QP_PKEY_INDEX)
- if (attr->pkey_index >= ipath_get_npkeys(dev->dd))
- goto inval;
-
- if (attr_mask & IB_QP_MIN_RNR_TIMER)
- if (attr->min_rnr_timer > 31)
- goto inval;
-
- if (attr_mask & IB_QP_PORT)
- if (attr->port_num == 0 ||
- attr->port_num > ibqp->device->phys_port_cnt)
- goto inval;
-
- /*
- * don't allow invalid Path MTU values or greater than 2048
- * unless we are configured for a 4KB MTU
- */
- if ((attr_mask & IB_QP_PATH_MTU) &&
- (ib_mtu_enum_to_int(attr->path_mtu) == -1 ||
- (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096)))
- goto inval;
-
- if (attr_mask & IB_QP_PATH_MIG_STATE)
- if (attr->path_mig_state != IB_MIG_MIGRATED &&
- attr->path_mig_state != IB_MIG_REARM)
- goto inval;
-
- if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
- if (attr->max_dest_rd_atomic > IPATH_MAX_RDMA_ATOMIC)
- goto inval;
-
- switch (new_state) {
- case IB_QPS_RESET:
- if (qp->state != IB_QPS_RESET) {
- qp->state = IB_QPS_RESET;
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- spin_unlock_irq(&qp->s_lock);
- /* Stop the sending tasklet */
- tasklet_kill(&qp->s_task);
- wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
- spin_lock_irq(&qp->s_lock);
- }
- ipath_reset_qp(qp, ibqp->qp_type);
- break;
-
- case IB_QPS_SQD:
- qp->s_draining = qp->s_last != qp->s_cur;
- qp->state = new_state;
- break;
-
- case IB_QPS_SQE:
- if (qp->ibqp.qp_type == IB_QPT_RC)
- goto inval;
- qp->state = new_state;
- break;
-
- case IB_QPS_ERR:
- lastwqe = ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- break;
-
- default:
- qp->state = new_state;
- break;
- }
-
- if (attr_mask & IB_QP_PKEY_INDEX)
- qp->s_pkey_index = attr->pkey_index;
-
- if (attr_mask & IB_QP_DEST_QPN)
- qp->remote_qpn = attr->dest_qp_num;
-
- if (attr_mask & IB_QP_SQ_PSN) {
- qp->s_psn = qp->s_next_psn = attr->sq_psn;
- qp->s_last_psn = qp->s_next_psn - 1;
- }
-
- if (attr_mask & IB_QP_RQ_PSN)
- qp->r_psn = attr->rq_psn;
-
- if (attr_mask & IB_QP_ACCESS_FLAGS)
- qp->qp_access_flags = attr->qp_access_flags;
-
- if (attr_mask & IB_QP_AV) {
- qp->remote_ah_attr = attr->ah_attr;
- qp->s_dmult = ipath_ib_rate_to_mult(attr->ah_attr.static_rate);
- }
-
- if (attr_mask & IB_QP_PATH_MTU)
- qp->path_mtu = attr->path_mtu;
-
- if (attr_mask & IB_QP_RETRY_CNT)
- qp->s_retry = qp->s_retry_cnt = attr->retry_cnt;
-
- if (attr_mask & IB_QP_RNR_RETRY) {
- qp->s_rnr_retry = attr->rnr_retry;
- if (qp->s_rnr_retry > 7)
- qp->s_rnr_retry = 7;
- qp->s_rnr_retry_cnt = qp->s_rnr_retry;
- }
-
- if (attr_mask & IB_QP_MIN_RNR_TIMER)
- qp->r_min_rnr_timer = attr->min_rnr_timer;
-
- if (attr_mask & IB_QP_TIMEOUT)
- qp->timeout = attr->timeout;
-
- if (attr_mask & IB_QP_QKEY)
- qp->qkey = attr->qkey;
-
- if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
- qp->r_max_rd_atomic = attr->max_dest_rd_atomic;
-
- if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
- qp->s_max_rd_atomic = attr->max_rd_atomic;
-
- spin_unlock_irq(&qp->s_lock);
-
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = qp->ibqp.device;
- ev.element.qp = &qp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
- }
- ret = 0;
- goto bail;
-
-inval:
- spin_unlock_irq(&qp->s_lock);
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_qp_init_attr *init_attr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
-
- attr->qp_state = qp->state;
- attr->cur_qp_state = attr->qp_state;
- attr->path_mtu = qp->path_mtu;
- attr->path_mig_state = 0;
- attr->qkey = qp->qkey;
- attr->rq_psn = qp->r_psn;
- attr->sq_psn = qp->s_next_psn;
- attr->dest_qp_num = qp->remote_qpn;
- attr->qp_access_flags = qp->qp_access_flags;
- attr->cap.max_send_wr = qp->s_size - 1;
- attr->cap.max_recv_wr = qp->ibqp.srq ? 0 : qp->r_rq.size - 1;
- attr->cap.max_send_sge = qp->s_max_sge;
- attr->cap.max_recv_sge = qp->r_rq.max_sge;
- attr->cap.max_inline_data = 0;
- attr->ah_attr = qp->remote_ah_attr;
- memset(&attr->alt_ah_attr, 0, sizeof(attr->alt_ah_attr));
- attr->pkey_index = qp->s_pkey_index;
- attr->alt_pkey_index = 0;
- attr->en_sqd_async_notify = 0;
- attr->sq_draining = qp->s_draining;
- attr->max_rd_atomic = qp->s_max_rd_atomic;
- attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
- attr->min_rnr_timer = qp->r_min_rnr_timer;
- attr->port_num = 1;
- attr->timeout = qp->timeout;
- attr->retry_cnt = qp->s_retry_cnt;
- attr->rnr_retry = qp->s_rnr_retry_cnt;
- attr->alt_port_num = 0;
- attr->alt_timeout = 0;
-
- init_attr->event_handler = qp->ibqp.event_handler;
- init_attr->qp_context = qp->ibqp.qp_context;
- init_attr->send_cq = qp->ibqp.send_cq;
- init_attr->recv_cq = qp->ibqp.recv_cq;
- init_attr->srq = qp->ibqp.srq;
- init_attr->cap = attr->cap;
- if (qp->s_flags & IPATH_S_SIGNAL_REQ_WR)
- init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
- else
- init_attr->sq_sig_type = IB_SIGNAL_ALL_WR;
- init_attr->qp_type = qp->ibqp.qp_type;
- init_attr->port_num = 1;
- return 0;
-}
-
-/**
- * ipath_compute_aeth - compute the AETH (syndrome + MSN)
- * @qp: the queue pair to compute the AETH for
- *
- * Returns the AETH.
- */
-__be32 ipath_compute_aeth(struct ipath_qp *qp)
-{
- u32 aeth = qp->r_msn & IPATH_MSN_MASK;
-
- if (qp->ibqp.srq) {
- /*
- * Shared receive queues don't generate credits.
- * Set the credit field to the invalid value.
- */
- aeth |= IPATH_AETH_CREDIT_INVAL << IPATH_AETH_CREDIT_SHIFT;
- } else {
- u32 min, max, x;
- u32 credits;
- struct ipath_rwq *wq = qp->r_rq.wq;
- u32 head;
- u32 tail;
-
- /* sanity check pointers before trusting them */
- head = wq->head;
- if (head >= qp->r_rq.size)
- head = 0;
- tail = wq->tail;
- if (tail >= qp->r_rq.size)
- tail = 0;
- /*
- * Compute the number of credits available (RWQEs).
- * XXX Not holding the r_rq.lock here so there is a small
- * chance that the pair of reads are not atomic.
- */
- credits = head - tail;
- if ((int)credits < 0)
- credits += qp->r_rq.size;
- /*
- * Binary search the credit table to find the code to
- * use.
- */
- min = 0;
- max = 31;
- for (;;) {
- x = (min + max) / 2;
- if (credit_table[x] == credits)
- break;
- if (credit_table[x] > credits)
- max = x;
- else if (min == x)
- break;
- else
- min = x;
- }
- aeth |= x << IPATH_AETH_CREDIT_SHIFT;
- }
- return cpu_to_be32(aeth);
-}
-
-/**
- * ipath_create_qp - create a queue pair for a device
- * @ibpd: the protection domain who's device we create the queue pair for
- * @init_attr: the attributes of the queue pair
- * @udata: unused by InfiniPath
- *
- * Returns the queue pair on success, otherwise returns an errno.
- *
- * Called by the ib_create_qp() core verbs function.
- */
-struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
- struct ib_qp_init_attr *init_attr,
- struct ib_udata *udata)
-{
- struct ipath_qp *qp;
- int err;
- struct ipath_swqe *swq = NULL;
- struct ipath_ibdev *dev;
- size_t sz;
- size_t sg_list_sz;
- struct ib_qp *ret;
-
- if (init_attr->create_flags) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
- init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- /* Check receive queue parameters if no SRQ is specified. */
- if (!init_attr->srq) {
- if (init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
- init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- if (init_attr->cap.max_send_sge +
- init_attr->cap.max_send_wr +
- init_attr->cap.max_recv_sge +
- init_attr->cap.max_recv_wr == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- }
-
- switch (init_attr->qp_type) {
- case IB_QPT_UC:
- case IB_QPT_RC:
- case IB_QPT_UD:
- case IB_QPT_SMI:
- case IB_QPT_GSI:
- sz = sizeof(struct ipath_sge) *
- init_attr->cap.max_send_sge +
- sizeof(struct ipath_swqe);
- swq = vmalloc((init_attr->cap.max_send_wr + 1) * sz);
- if (swq == NULL) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
- sz = sizeof(*qp);
- sg_list_sz = 0;
- if (init_attr->srq) {
- struct ipath_srq *srq = to_isrq(init_attr->srq);
-
- if (srq->rq.max_sge > 1)
- sg_list_sz = sizeof(*qp->r_sg_list) *
- (srq->rq.max_sge - 1);
- } else if (init_attr->cap.max_recv_sge > 1)
- sg_list_sz = sizeof(*qp->r_sg_list) *
- (init_attr->cap.max_recv_sge - 1);
- qp = kmalloc(sz + sg_list_sz, GFP_KERNEL);
- if (!qp) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_swq;
- }
- if (sg_list_sz && (init_attr->qp_type == IB_QPT_UD ||
- init_attr->qp_type == IB_QPT_SMI ||
- init_attr->qp_type == IB_QPT_GSI)) {
- qp->r_ud_sg_list = kmalloc(sg_list_sz, GFP_KERNEL);
- if (!qp->r_ud_sg_list) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_qp;
- }
- } else
- qp->r_ud_sg_list = NULL;
- if (init_attr->srq) {
- sz = 0;
- qp->r_rq.size = 0;
- qp->r_rq.max_sge = 0;
- qp->r_rq.wq = NULL;
- init_attr->cap.max_recv_wr = 0;
- init_attr->cap.max_recv_sge = 0;
- } else {
- qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
- qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
- sz = (sizeof(struct ib_sge) * qp->r_rq.max_sge) +
- sizeof(struct ipath_rwqe);
- qp->r_rq.wq = vmalloc_user(sizeof(struct ipath_rwq) +
- qp->r_rq.size * sz);
- if (!qp->r_rq.wq) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_sg_list;
- }
- }
-
- /*
- * ib_create_qp() will initialize qp->ibqp
- * except for qp->ibqp.qp_num.
- */
- spin_lock_init(&qp->s_lock);
- spin_lock_init(&qp->r_rq.lock);
- atomic_set(&qp->refcount, 0);
- init_waitqueue_head(&qp->wait);
- init_waitqueue_head(&qp->wait_dma);
- tasklet_init(&qp->s_task, ipath_do_send, (unsigned long)qp);
- INIT_LIST_HEAD(&qp->piowait);
- INIT_LIST_HEAD(&qp->timerwait);
- qp->state = IB_QPS_RESET;
- qp->s_wq = swq;
- qp->s_size = init_attr->cap.max_send_wr + 1;
- qp->s_max_sge = init_attr->cap.max_send_sge;
- if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR)
- qp->s_flags = IPATH_S_SIGNAL_REQ_WR;
- else
- qp->s_flags = 0;
- dev = to_idev(ibpd->device);
- err = ipath_alloc_qpn(&dev->qp_table, qp,
- init_attr->qp_type);
- if (err) {
- ret = ERR_PTR(err);
- vfree(qp->r_rq.wq);
- goto bail_sg_list;
- }
- qp->ip = NULL;
- qp->s_tx = NULL;
- ipath_reset_qp(qp, init_attr->qp_type);
- break;
-
- default:
- /* Don't support raw QPs */
- ret = ERR_PTR(-ENOSYS);
- goto bail;
- }
-
- init_attr->cap.max_inline_data = 0;
-
- /*
- * Return the address of the RWQ as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- if (!qp->r_rq.wq) {
- __u64 offset = 0;
-
- err = ib_copy_to_udata(udata, &offset,
- sizeof(offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else {
- u32 s = sizeof(struct ipath_rwq) +
- qp->r_rq.size * sz;
-
- qp->ip =
- ipath_create_mmap_info(dev, s,
- ibpd->uobject->context,
- qp->r_rq.wq);
- if (!qp->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- err = ib_copy_to_udata(udata, &(qp->ip->offset),
- sizeof(qp->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- }
- }
-
- spin_lock(&dev->n_qps_lock);
- if (dev->n_qps_allocated == ib_ipath_max_qps) {
- spin_unlock(&dev->n_qps_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_qps_allocated++;
- spin_unlock(&dev->n_qps_lock);
-
- if (qp->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&qp->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = &qp->ibqp;
- goto bail;
-
-bail_ip:
- if (qp->ip)
- kref_put(&qp->ip->ref, ipath_release_mmap_info);
- else
- vfree(qp->r_rq.wq);
- ipath_free_qp(&dev->qp_table, qp);
- free_qpn(&dev->qp_table, qp->ibqp.qp_num);
-bail_sg_list:
- kfree(qp->r_ud_sg_list);
-bail_qp:
- kfree(qp);
-bail_swq:
- vfree(swq);
-bail:
- return ret;
-}
-
-/**
- * ipath_destroy_qp - destroy a queue pair
- * @ibqp: the queue pair to destroy
- *
- * Returns 0 on success.
- *
- * Note that this can be called while the QP is actively sending or
- * receiving!
- */
-int ipath_destroy_qp(struct ib_qp *ibqp)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
-
- /* Make sure HW and driver activity is stopped. */
- spin_lock_irq(&qp->s_lock);
- if (qp->state != IB_QPS_RESET) {
- qp->state = IB_QPS_RESET;
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- spin_unlock_irq(&qp->s_lock);
- /* Stop the sending tasklet */
- tasklet_kill(&qp->s_task);
- wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
- } else
- spin_unlock_irq(&qp->s_lock);
-
- ipath_free_qp(&dev->qp_table, qp);
-
- if (qp->s_tx) {
- atomic_dec(&qp->refcount);
- if (qp->s_tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
- kfree(qp->s_tx->txreq.map_addr);
- spin_lock_irq(&dev->pending_lock);
- list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
- spin_unlock_irq(&dev->pending_lock);
- qp->s_tx = NULL;
- }
-
- wait_event(qp->wait, !atomic_read(&qp->refcount));
-
- /* all user's cleaned up, mark it available */
- free_qpn(&dev->qp_table, qp->ibqp.qp_num);
- spin_lock(&dev->n_qps_lock);
- dev->n_qps_allocated--;
- spin_unlock(&dev->n_qps_lock);
-
- if (qp->ip)
- kref_put(&qp->ip->ref, ipath_release_mmap_info);
- else
- vfree(qp->r_rq.wq);
- kfree(qp->r_ud_sg_list);
- vfree(qp->s_wq);
- kfree(qp);
- return 0;
-}
-
-/**
- * ipath_init_qp_table - initialize the QP table for a device
- * @idev: the device who's QP table we're initializing
- * @size: the size of the QP table
- *
- * Returns 0 on success, otherwise returns an errno.
- */
-int ipath_init_qp_table(struct ipath_ibdev *idev, int size)
-{
- int i;
- int ret;
-
- idev->qp_table.last = 1; /* QPN 0 and 1 are special. */
- idev->qp_table.max = size;
- idev->qp_table.nmaps = 1;
- idev->qp_table.table = kcalloc(size, sizeof(*idev->qp_table.table),
- GFP_KERNEL);
- if (idev->qp_table.table == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- for (i = 0; i < ARRAY_SIZE(idev->qp_table.map); i++) {
- atomic_set(&idev->qp_table.map[i].n_free, BITS_PER_PAGE);
- idev->qp_table.map[i].page = NULL;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_get_credit - flush the send work queue of a QP
- * @qp: the qp who's send work queue to flush
- * @aeth: the Acknowledge Extended Transport Header
- *
- * The QP s_lock should be held.
- */
-void ipath_get_credit(struct ipath_qp *qp, u32 aeth)
-{
- u32 credit = (aeth >> IPATH_AETH_CREDIT_SHIFT) & IPATH_AETH_CREDIT_MASK;
-
- /*
- * If the credit is invalid, we can send
- * as many packets as we like. Otherwise, we have to
- * honor the credit field.
- */
- if (credit == IPATH_AETH_CREDIT_INVAL)
- qp->s_lsn = (u32) -1;
- else if (qp->s_lsn != (u32) -1) {
- /* Compute new LSN (i.e., MSN + credit) */
- credit = (aeth + credit_table[credit]) & IPATH_MSN_MASK;
- if (ipath_cmp24(credit, qp->s_lsn) > 0)
- qp->s_lsn = credit;
- }
-
- /* Restart sending if it was blocked due to lack of credits. */
- if ((qp->s_flags & IPATH_S_WAIT_SSN_CREDIT) &&
- qp->s_cur != qp->s_head &&
- (qp->s_lsn == (u32) -1 ||
- ipath_cmp24(get_swqe_ptr(qp, qp->s_cur)->ssn,
- qp->s_lsn + 1) <= 0))
- ipath_schedule_send(qp);
-}
diff --git a/drivers/staging/rdma/ipath/ipath_rc.c b/drivers/staging/rdma/ipath/ipath_rc.c
deleted file mode 100644
index d4aa535..0000000
--- a/drivers/staging/rdma/ipath/ipath_rc.c
+++ /dev/null
@@ -1,1969 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/io.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/* cut down ridiculously long IB macro names */
-#define OP(x) IB_OPCODE_RC_##x
-
-static u32 restart_sge(struct ipath_sge_state *ss, struct ipath_swqe *wqe,
- u32 psn, u32 pmtu)
-{
- u32 len;
-
- len = ((psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
- ss->sge = wqe->sg_list[0];
- ss->sg_list = wqe->sg_list + 1;
- ss->num_sge = wqe->wr.num_sge;
- ipath_skip_sge(ss, len);
- return wqe->length - len;
-}
-
-/**
- * ipath_init_restart- initialize the qp->s_sge after a restart
- * @qp: the QP who's SGE we're restarting
- * @wqe: the work queue to initialize the QP's SGE from
- *
- * The QP s_lock should be held and interrupts disabled.
- */
-static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
-{
- struct ipath_ibdev *dev;
-
- qp->s_len = restart_sge(&qp->s_sge, wqe, qp->s_psn,
- ib_mtu_enum_to_int(qp->path_mtu));
- dev = to_idev(qp->ibqp.device);
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
-}
-
-/**
- * ipath_make_rc_ack - construct a response packet (ACK, NAK, or RDMA read)
- * @qp: a pointer to the QP
- * @ohdr: a pointer to the IB header being constructed
- * @pmtu: the path MTU
- *
- * Return 1 if constructed; otherwise, return 0.
- * Note that we are in the responder's side of the QP context.
- * Note the QP s_lock must be held.
- */
-static int ipath_make_rc_ack(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr, u32 pmtu)
-{
- struct ipath_ack_entry *e;
- u32 hwords;
- u32 len;
- u32 bth0;
- u32 bth2;
-
- /* Don't send an ACK if we aren't supposed to. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto bail;
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
-
- switch (qp->s_ack_state) {
- case OP(RDMA_READ_RESPONSE_LAST):
- case OP(RDMA_READ_RESPONSE_ONLY):
- case OP(ATOMIC_ACKNOWLEDGE):
- /*
- * We can increment the tail pointer now that the last
- * response has been sent instead of only being
- * constructed.
- */
- if (++qp->s_tail_ack_queue > IPATH_MAX_RDMA_ATOMIC)
- qp->s_tail_ack_queue = 0;
- /* FALLTHROUGH */
- case OP(SEND_ONLY):
- case OP(ACKNOWLEDGE):
- /* Check for no next entry in the queue. */
- if (qp->r_head_ack_queue == qp->s_tail_ack_queue) {
- if (qp->s_flags & IPATH_S_ACK_PENDING)
- goto normal;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- goto bail;
- }
-
- e = &qp->s_ack_queue[qp->s_tail_ack_queue];
- if (e->opcode == OP(RDMA_READ_REQUEST)) {
- /* Copy SGE state in case we need to resend */
- qp->s_ack_rdma_sge = e->rdma_sge;
- qp->s_cur_sge = &qp->s_ack_rdma_sge;
- len = e->rdma_sge.sge.sge_length;
- if (len > pmtu) {
- len = pmtu;
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_FIRST);
- } else {
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_ONLY);
- e->sent = 1;
- }
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- qp->s_ack_rdma_psn = e->psn;
- bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
- } else {
- /* COMPARE_SWAP or FETCH_ADD */
- qp->s_cur_sge = NULL;
- len = 0;
- qp->s_ack_state = OP(ATOMIC_ACKNOWLEDGE);
- ohdr->u.at.aeth = ipath_compute_aeth(qp);
- ohdr->u.at.atomic_ack_eth[0] =
- cpu_to_be32(e->atomic_data >> 32);
- ohdr->u.at.atomic_ack_eth[1] =
- cpu_to_be32(e->atomic_data);
- hwords += sizeof(ohdr->u.at) / sizeof(u32);
- bth2 = e->psn;
- e->sent = 1;
- }
- bth0 = qp->s_ack_state << 24;
- break;
-
- case OP(RDMA_READ_RESPONSE_FIRST):
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- len = qp->s_ack_rdma_sge.sge.sge_length;
- if (len > pmtu)
- len = pmtu;
- else {
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST);
- qp->s_ack_queue[qp->s_tail_ack_queue].sent = 1;
- }
- bth0 = qp->s_ack_state << 24;
- bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
- break;
-
- default:
- normal:
- /*
- * Send a regular ACK.
- * Set the s_ack_state so we wait until after sending
- * the ACK before setting s_ack_state to ACKNOWLEDGE
- * (see above).
- */
- qp->s_ack_state = OP(SEND_ONLY);
- qp->s_flags &= ~IPATH_S_ACK_PENDING;
- qp->s_cur_sge = NULL;
- if (qp->s_nak_state)
- ohdr->u.aeth =
- cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
- (qp->s_nak_state <<
- IPATH_AETH_CREDIT_SHIFT));
- else
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- len = 0;
- bth0 = OP(ACKNOWLEDGE) << 24;
- bth2 = qp->s_ack_psn & IPATH_PSN_MASK;
- }
- qp->s_hdrwords = hwords;
- qp->s_cur_size = len;
- ipath_make_ruc_header(dev, qp, ohdr, bth0, bth2);
- return 1;
-
-bail:
- return 0;
-}
-
-/**
- * ipath_make_rc_req - construct a request packet (SEND, RDMA r/w, ATOMIC)
- * @qp: a pointer to the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_rc_req(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_other_headers *ohdr;
- struct ipath_sge_state *ss;
- struct ipath_swqe *wqe;
- u32 hwords;
- u32 len;
- u32 bth0;
- u32 bth2;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- char newreq;
- unsigned long flags;
- int ret = 0;
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
- /*
- * The lock is needed to synchronize between the sending tasklet,
- * the receive interrupt handler, and timeout resends.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Sending responses has higher priority over sending requests. */
- if ((qp->r_head_ack_queue != qp->s_tail_ack_queue ||
- (qp->s_flags & IPATH_S_ACK_PENDING) ||
- qp->s_ack_state != OP(ACKNOWLEDGE)) &&
- ipath_make_rc_ack(dev, qp, ohdr, pmtu))
- goto done;
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- /* Leave BUSY set until RNR timeout. */
- if (qp->s_rnr_timeout) {
- qp->s_flags |= IPATH_S_WAITING;
- goto bail;
- }
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
- bth0 = 1 << 22; /* Set M bit */
-
- /* Send a request. */
- wqe = get_swqe_ptr(qp, qp->s_cur);
- switch (qp->s_state) {
- default:
- if (!(ib_ipath_state_ops[qp->state] &
- IPATH_PROCESS_NEXT_SEND_OK))
- goto bail;
- /*
- * Resend an old request or start a new one.
- *
- * We keep track of the current SWQE so that
- * we don't reset the "furthest progress" state
- * if we need to back up.
- */
- newreq = 0;
- if (qp->s_cur == qp->s_tail) {
- /* Check if send work queue is empty. */
- if (qp->s_tail == qp->s_head)
- goto bail;
- /*
- * If a fence is requested, wait for previous
- * RDMA read and atomic operations to finish.
- */
- if ((wqe->wr.send_flags & IB_SEND_FENCE) &&
- qp->s_num_rd_atomic) {
- qp->s_flags |= IPATH_S_FENCE_PENDING;
- goto bail;
- }
- wqe->psn = qp->s_next_psn;
- newreq = 1;
- }
- /*
- * Note that we have to be careful not to modify the
- * original work request since we may need to resend
- * it.
- */
- len = wqe->length;
- ss = &qp->s_sge;
- bth2 = 0;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- /* If no credit, return. */
- if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
- qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
- goto bail;
- }
- wqe->lpsn = wqe->psn;
- if (len > pmtu) {
- wqe->lpsn += (len - 1) / pmtu;
- qp->s_state = OP(SEND_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_ONLY);
- else {
- qp->s_state = OP(SEND_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth2 = 1 << 31; /* Request ACK. */
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_WRITE:
- if (newreq && qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- /* FALLTHROUGH */
- case IB_WR_RDMA_WRITE_WITH_IMM:
- /* If no credit, return. */
- if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
- qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
- goto bail;
- }
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->rdma_wr.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->rdma_wr.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- hwords += sizeof(struct ib_reth) / sizeof(u32);
- wqe->lpsn = wqe->psn;
- if (len > pmtu) {
- wqe->lpsn += (len - 1) / pmtu;
- qp->s_state = OP(RDMA_WRITE_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_ONLY);
- else {
- qp->s_state =
- OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after RETH */
- ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- bth2 = 1 << 31; /* Request ACK. */
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_READ:
- /*
- * Don't allow more operations to be started
- * than the QP limits allow.
- */
- if (newreq) {
- if (qp->s_num_rd_atomic >=
- qp->s_max_rd_atomic) {
- qp->s_flags |= IPATH_S_RDMAR_PENDING;
- goto bail;
- }
- qp->s_num_rd_atomic++;
- if (qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- /*
- * Adjust s_next_psn to count the
- * expected number of responses.
- */
- if (len > pmtu)
- qp->s_next_psn += (len - 1) / pmtu;
- wqe->lpsn = qp->s_next_psn++;
- }
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->rdma_wr.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->rdma_wr.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- qp->s_state = OP(RDMA_READ_REQUEST);
- hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
- ss = NULL;
- len = 0;
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_ATOMIC_CMP_AND_SWP:
- case IB_WR_ATOMIC_FETCH_AND_ADD:
- /*
- * Don't allow more operations to be started
- * than the QP limits allow.
- */
- if (newreq) {
- if (qp->s_num_rd_atomic >=
- qp->s_max_rd_atomic) {
- qp->s_flags |= IPATH_S_RDMAR_PENDING;
- goto bail;
- }
- qp->s_num_rd_atomic++;
- if (qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- wqe->lpsn = wqe->psn;
- }
- if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP) {
- qp->s_state = OP(COMPARE_SWAP);
- ohdr->u.atomic_eth.swap_data = cpu_to_be64(
- wqe->atomic_wr.swap);
- ohdr->u.atomic_eth.compare_data = cpu_to_be64(
- wqe->atomic_wr.compare_add);
- } else {
- qp->s_state = OP(FETCH_ADD);
- ohdr->u.atomic_eth.swap_data = cpu_to_be64(
- wqe->atomic_wr.compare_add);
- ohdr->u.atomic_eth.compare_data = 0;
- }
- ohdr->u.atomic_eth.vaddr[0] = cpu_to_be32(
- wqe->atomic_wr.remote_addr >> 32);
- ohdr->u.atomic_eth.vaddr[1] = cpu_to_be32(
- wqe->atomic_wr.remote_addr);
- ohdr->u.atomic_eth.rkey = cpu_to_be32(
- wqe->atomic_wr.rkey);
- hwords += sizeof(struct ib_atomic_eth) / sizeof(u32);
- ss = NULL;
- len = 0;
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- default:
- goto bail;
- }
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->wr.num_sge;
- qp->s_len = wqe->length;
- if (newreq) {
- qp->s_tail++;
- if (qp->s_tail >= qp->s_size)
- qp->s_tail = 0;
- }
- bth2 |= qp->s_psn & IPATH_PSN_MASK;
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- qp->s_psn = wqe->lpsn + 1;
- else {
- qp->s_psn++;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- }
- /*
- * Put the QP on the pending list so lost ACKs will cause
- * a retry. More than one request can be pending so the
- * QP may already be on the dev->pending list.
- */
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
- break;
-
- case OP(RDMA_READ_RESPONSE_FIRST):
- /*
- * This case can only happen if a send is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- /* FALLTHROUGH */
- case OP(SEND_FIRST):
- qp->s_state = OP(SEND_MIDDLE);
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- bth2 = qp->s_psn++ & IPATH_PSN_MASK;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- ss = &qp->s_sge;
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_LAST);
- else {
- qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_cur++;
- if (qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_READ_RESPONSE_LAST):
- /*
- * This case can only happen if a RDMA write is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_FIRST):
- qp->s_state = OP(RDMA_WRITE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- bth2 = qp->s_psn++ & IPATH_PSN_MASK;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- ss = &qp->s_sge;
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_LAST);
- else {
- qp->s_state = OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_cur++;
- if (qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- /*
- * This case can only happen if a RDMA read is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- len = ((qp->s_psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->rdma_wr.remote_addr + len);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->rdma_wr.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(qp->s_len);
- qp->s_state = OP(RDMA_READ_REQUEST);
- hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
- bth2 = qp->s_psn & IPATH_PSN_MASK;
- qp->s_psn = wqe->lpsn + 1;
- ss = NULL;
- len = 0;
- qp->s_cur++;
- if (qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
- }
- if (ipath_cmp24(qp->s_psn, qp->s_last_psn + IPATH_PSN_CREDIT - 1) >= 0)
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_len -= len;
- qp->s_hdrwords = hwords;
- qp->s_cur_sge = ss;
- qp->s_cur_size = len;
- ipath_make_ruc_header(dev, qp, ohdr, bth0 | (qp->s_state << 24), bth2);
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * send_rc_ack - Construct an ACK packet and send it
- * @qp: a pointer to the QP
- *
- * This is called from ipath_rc_rcv() and only uses the receive
- * side QP state.
- * Note that RDMA reads and atomics are handled in the
- * send side QP state and tasklet.
- */
-static void send_rc_ack(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_devdata *dd;
- u16 lrh0;
- u32 bth0;
- u32 hwords;
- u32 __iomem *piobuf;
- struct ipath_ib_header hdr;
- struct ipath_other_headers *ohdr;
- unsigned long flags;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Don't send ACK or NAK if a RDMA read or atomic is pending. */
- if (qp->r_head_ack_queue != qp->s_tail_ack_queue ||
- (qp->s_flags & IPATH_S_ACK_PENDING) ||
- qp->s_ack_state != OP(ACKNOWLEDGE))
- goto queue_ack;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Don't try to send ACKs if the link isn't ACTIVE */
- dd = dev->dd;
- if (!(dd->ipath_flags & IPATH_LINKACTIVE))
- goto done;
-
- piobuf = ipath_getpiobuf(dd, 0, NULL);
- if (!piobuf) {
- /*
- * We are out of PIO buffers at the moment.
- * Pass responsibility for sending the ACK to the
- * send tasklet so that when a PIO buffer becomes
- * available, the ACK is sent ahead of other outgoing
- * packets.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
- goto queue_ack;
- }
-
- /* Construct the header. */
- ohdr = &hdr.u.oth;
- lrh0 = IPATH_LRH_BTH;
- /* header size in 32-bit words LRH+BTH+AETH = (8+12+4)/4. */
- hwords = 6;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- hwords += ipath_make_grh(dev, &hdr.u.l.grh,
- &qp->remote_ah_attr.grh,
- hwords, 0);
- ohdr = &hdr.u.l.oth;
- lrh0 = IPATH_LRH_GRH;
- }
- /* read pkey_index w/o lock (its atomic) */
- bth0 = ipath_get_pkey(dd, qp->s_pkey_index) |
- (OP(ACKNOWLEDGE) << 24) | (1 << 22);
- if (qp->r_nak_state)
- ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
- (qp->r_nak_state <<
- IPATH_AETH_CREDIT_SHIFT));
- else
- ohdr->u.aeth = ipath_compute_aeth(qp);
- lrh0 |= qp->remote_ah_attr.sl << 4;
- hdr.lrh[0] = cpu_to_be16(lrh0);
- hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC);
- hdr.lrh[3] = cpu_to_be16(dd->ipath_lid |
- qp->remote_ah_attr.src_path_bits);
- ohdr->bth[0] = cpu_to_be32(bth0);
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(qp->r_ack_psn & IPATH_PSN_MASK);
-
- writeq(hwords + 1, piobuf);
-
- if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
- u32 *hdrp = (u32 *) &hdr;
-
- ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, hdrp, hwords - 1);
- ipath_flush_wc();
- __raw_writel(hdrp[hwords - 1], piobuf + hwords + 1);
- } else
- __iowrite32_copy(piobuf + 2, (u32 *) &hdr, hwords);
-
- ipath_flush_wc();
-
- dev->n_unicast_xmit++;
- goto done;
-
-queue_ack:
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK) {
- dev->n_rc_qacks++;
- qp->s_flags |= IPATH_S_ACK_PENDING;
- qp->s_nak_state = qp->r_nak_state;
- qp->s_ack_psn = qp->r_ack_psn;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
- }
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return;
-}
-
-/**
- * reset_psn - reset the QP state to send starting from PSN
- * @qp: the QP
- * @psn: the packet sequence number to restart at
- *
- * This is called from ipath_rc_rcv() to process an incoming RC ACK
- * for the given QP.
- * Called at interrupt level with the QP s_lock held.
- */
-static void reset_psn(struct ipath_qp *qp, u32 psn)
-{
- u32 n = qp->s_last;
- struct ipath_swqe *wqe = get_swqe_ptr(qp, n);
- u32 opcode;
-
- qp->s_cur = n;
-
- /*
- * If we are starting the request from the beginning,
- * let the normal send code handle initialization.
- */
- if (ipath_cmp24(psn, wqe->psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- goto done;
- }
-
- /* Find the work request opcode corresponding to the given PSN. */
- opcode = wqe->wr.opcode;
- for (;;) {
- int diff;
-
- if (++n == qp->s_size)
- n = 0;
- if (n == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, n);
- diff = ipath_cmp24(psn, wqe->psn);
- if (diff < 0)
- break;
- qp->s_cur = n;
- /*
- * If we are starting the request from the beginning,
- * let the normal send code handle initialization.
- */
- if (diff == 0) {
- qp->s_state = OP(SEND_LAST);
- goto done;
- }
- opcode = wqe->wr.opcode;
- }
-
- /*
- * Set the state to restart in the middle of a request.
- * Don't change the s_sge, s_cur_sge, or s_cur_size.
- * See ipath_make_rc_req().
- */
- switch (opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
- break;
-
- case IB_WR_RDMA_READ:
- qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE);
- break;
-
- default:
- /*
- * This case shouldn't happen since its only
- * one PSN per req.
- */
- qp->s_state = OP(SEND_LAST);
- }
-done:
- qp->s_psn = psn;
-}
-
-/**
- * ipath_restart_rc - back up requester to resend the last un-ACKed request
- * @qp: the QP to restart
- * @psn: packet sequence number for the request
- * @wc: the work completion request
- *
- * The QP s_lock should be held and interrupts disabled.
- */
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn)
-{
- struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
- struct ipath_ibdev *dev;
-
- if (qp->s_retry == 0) {
- ipath_send_complete(qp, wqe, IB_WC_RETRY_EXC_ERR);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- goto bail;
- }
- qp->s_retry--;
-
- /*
- * Remove the QP from the timeout queue.
- * Note: it may already have been removed by ipath_ib_timer().
- */
- dev = to_idev(qp->ibqp.device);
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
-
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- dev->n_rc_resends++;
- else
- dev->n_rc_resends += (qp->s_psn - psn) & IPATH_PSN_MASK;
-
- reset_psn(qp, psn);
- ipath_schedule_send(qp);
-
-bail:
- return;
-}
-
-static inline void update_last_psn(struct ipath_qp *qp, u32 psn)
-{
- qp->s_last_psn = psn;
-}
-
-/**
- * do_rc_ack - process an incoming RC ACK
- * @qp: the QP the ACK came in on
- * @psn: the packet sequence number of the ACK
- * @opcode: the opcode of the request that resulted in the ACK
- *
- * This is called from ipath_rc_rcv_resp() to process an incoming RC ACK
- * for the given QP.
- * Called at interrupt level with the QP s_lock held and interrupts disabled.
- * Returns 1 if OK, 0 if current operation should be aborted (NAK).
- */
-static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode,
- u64 val)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ib_wc wc;
- enum ib_wc_status status;
- struct ipath_swqe *wqe;
- int ret = 0;
- u32 ack_psn;
- int diff;
-
- /*
- * Remove the QP from the timeout queue (or RNR timeout queue).
- * If ipath_ib_timer() has already removed it,
- * it's OK since we hold the QP s_lock and ipath_restart_rc()
- * just won't find anything to restart if we ACK everything.
- */
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- spin_unlock(&dev->pending_lock);
-
- /*
- * Note that NAKs implicitly ACK outstanding SEND and RDMA write
- * requests and implicitly NAK RDMA read and atomic requests issued
- * before the NAK'ed request. The MSN won't include the NAK'ed
- * request but will include an ACK'ed request(s).
- */
- ack_psn = psn;
- if (aeth >> 29)
- ack_psn--;
- wqe = get_swqe_ptr(qp, qp->s_last);
-
- /*
- * The MSN might be for a later WQE than the PSN indicates so
- * only complete WQEs that the PSN finishes.
- */
- while ((diff = ipath_cmp24(ack_psn, wqe->lpsn)) >= 0) {
- /*
- * RDMA_READ_RESPONSE_ONLY is a special case since
- * we want to generate completion events for everything
- * before the RDMA read, copy the data, then generate
- * the completion for the read.
- */
- if (wqe->wr.opcode == IB_WR_RDMA_READ &&
- opcode == OP(RDMA_READ_RESPONSE_ONLY) &&
- diff == 0) {
- ret = 1;
- goto bail;
- }
- /*
- * If this request is a RDMA read or atomic, and the ACK is
- * for a later operation, this ACK NAKs the RDMA read or
- * atomic. In other words, only a RDMA_READ_LAST or ONLY
- * can ACK a RDMA read and likewise for atomic ops. Note
- * that the NAK case can only happen if relaxed ordering is
- * used and requests are sent after an RDMA read or atomic
- * is sent but before the response is received.
- */
- if ((wqe->wr.opcode == IB_WR_RDMA_READ &&
- (opcode != OP(RDMA_READ_RESPONSE_LAST) || diff != 0)) ||
- ((wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) &&
- (opcode != OP(ATOMIC_ACKNOWLEDGE) || diff != 0))) {
- /*
- * The last valid PSN seen is the previous
- * request's.
- */
- update_last_psn(qp, wqe->psn - 1);
- /* Retry this request. */
- ipath_restart_rc(qp, wqe->psn);
- /*
- * No need to process the ACK/NAK since we are
- * restarting an earlier request.
- */
- goto bail;
- }
- if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
- *(u64 *) wqe->sg_list[0].vaddr = val;
- if (qp->s_num_rd_atomic &&
- (wqe->wr.opcode == IB_WR_RDMA_READ ||
- wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)) {
- qp->s_num_rd_atomic--;
- /* Restart sending task if fence is complete */
- if (((qp->s_flags & IPATH_S_FENCE_PENDING) &&
- !qp->s_num_rd_atomic) ||
- qp->s_flags & IPATH_S_RDMAR_PENDING)
- ipath_schedule_send(qp);
- }
- /* Post a send completion queue entry if requested. */
- if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
- (wqe->wr.send_flags & IB_SEND_SIGNALED)) {
- memset(&wc, 0, sizeof wc);
- wc.wr_id = wqe->wr.wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.byte_len = wqe->length;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
- }
- qp->s_retry = qp->s_retry_cnt;
- /*
- * If we are completing a request which is in the process of
- * being resent, we can stop resending it since we know the
- * responder has already seen it.
- */
- if (qp->s_last == qp->s_cur) {
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- qp->s_last = qp->s_cur;
- if (qp->s_last == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, qp->s_cur);
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = wqe->psn;
- } else {
- if (++qp->s_last >= qp->s_size)
- qp->s_last = 0;
- if (qp->state == IB_QPS_SQD && qp->s_last == qp->s_cur)
- qp->s_draining = 0;
- if (qp->s_last == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, qp->s_last);
- }
- }
-
- switch (aeth >> 29) {
- case 0: /* ACK */
- dev->n_rc_acks++;
- /* If this is a partial ACK, reset the retransmit timer. */
- if (qp->s_last != qp->s_tail) {
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
- /*
- * If we get a partial ACK for a resent operation,
- * we can stop resending the earlier packets and
- * continue with the next packet the receiver wants.
- */
- if (ipath_cmp24(qp->s_psn, psn) <= 0) {
- reset_psn(qp, psn + 1);
- ipath_schedule_send(qp);
- }
- } else if (ipath_cmp24(qp->s_psn, psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = psn + 1;
- }
- ipath_get_credit(qp, aeth);
- qp->s_rnr_retry = qp->s_rnr_retry_cnt;
- qp->s_retry = qp->s_retry_cnt;
- update_last_psn(qp, psn);
- ret = 1;
- goto bail;
-
- case 1: /* RNR NAK */
- dev->n_rnr_naks++;
- if (qp->s_last == qp->s_tail)
- goto bail;
- if (qp->s_rnr_retry == 0) {
- status = IB_WC_RNR_RETRY_EXC_ERR;
- goto class_b;
- }
- if (qp->s_rnr_retry_cnt < 7)
- qp->s_rnr_retry--;
-
- /* The last valid PSN is the previous PSN. */
- update_last_psn(qp, psn - 1);
-
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- dev->n_rc_resends++;
- else
- dev->n_rc_resends +=
- (qp->s_psn - psn) & IPATH_PSN_MASK;
-
- reset_psn(qp, psn);
-
- qp->s_rnr_timeout =
- ib_ipath_rnr_table[(aeth >> IPATH_AETH_CREDIT_SHIFT) &
- IPATH_AETH_CREDIT_MASK];
- ipath_insert_rnr_queue(qp);
- ipath_schedule_send(qp);
- goto bail;
-
- case 3: /* NAK */
- if (qp->s_last == qp->s_tail)
- goto bail;
- /* The last valid PSN is the previous PSN. */
- update_last_psn(qp, psn - 1);
- switch ((aeth >> IPATH_AETH_CREDIT_SHIFT) &
- IPATH_AETH_CREDIT_MASK) {
- case 0: /* PSN sequence error */
- dev->n_seq_naks++;
- /*
- * Back up to the responder's expected PSN.
- * Note that we might get a NAK in the middle of an
- * RDMA READ response which terminates the RDMA
- * READ.
- */
- ipath_restart_rc(qp, psn);
- break;
-
- case 1: /* Invalid Request */
- status = IB_WC_REM_INV_REQ_ERR;
- dev->n_other_naks++;
- goto class_b;
-
- case 2: /* Remote Access Error */
- status = IB_WC_REM_ACCESS_ERR;
- dev->n_other_naks++;
- goto class_b;
-
- case 3: /* Remote Operation Error */
- status = IB_WC_REM_OP_ERR;
- dev->n_other_naks++;
- class_b:
- ipath_send_complete(qp, wqe, status);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- break;
-
- default:
- /* Ignore other reserved NAK error codes */
- goto reserved;
- }
- qp->s_rnr_retry = qp->s_rnr_retry_cnt;
- goto bail;
-
- default: /* 2: reserved */
- reserved:
- /* Ignore reserved NAK codes. */
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-/**
- * ipath_rc_rcv_resp - process an incoming RC response packet
- * @dev: the device this packet came in on
- * @ohdr: the other headers for this packet
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP for this packet
- * @opcode: the opcode for this packet
- * @psn: the packet sequence number for this packet
- * @hdrsize: the header length
- * @pmtu: the path MTU
- * @header_in_data: true if part of the header data is in the data buffer
- *
- * This is called from ipath_rc_rcv() to process an incoming RC response
- * packet for the given QP.
- * Called at interrupt level.
- */
-static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
- struct ipath_other_headers *ohdr,
- void *data, u32 tlen,
- struct ipath_qp *qp,
- u32 opcode,
- u32 psn, u32 hdrsize, u32 pmtu,
- int header_in_data)
-{
- struct ipath_swqe *wqe;
- enum ib_wc_status status;
- unsigned long flags;
- int diff;
- u32 pad;
- u32 aeth;
- u64 val;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Double check we can process this now that we hold the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto ack_done;
-
- /* Ignore invalid responses. */
- if (ipath_cmp24(psn, qp->s_next_psn) >= 0)
- goto ack_done;
-
- /* Ignore duplicate responses. */
- diff = ipath_cmp24(psn, qp->s_last_psn);
- if (unlikely(diff <= 0)) {
- /* Update credits for "ghost" ACKs */
- if (diff == 0 && opcode == OP(ACKNOWLEDGE)) {
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- if ((aeth >> 29) == 0)
- ipath_get_credit(qp, aeth);
- }
- goto ack_done;
- }
-
- if (unlikely(qp->s_last == qp->s_tail))
- goto ack_done;
- wqe = get_swqe_ptr(qp, qp->s_last);
- status = IB_WC_SUCCESS;
-
- switch (opcode) {
- case OP(ACKNOWLEDGE):
- case OP(ATOMIC_ACKNOWLEDGE):
- case OP(RDMA_READ_RESPONSE_FIRST):
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- if (opcode == OP(ATOMIC_ACKNOWLEDGE)) {
- if (!header_in_data) {
- __be32 *p = ohdr->u.at.atomic_ack_eth;
-
- val = ((u64) be32_to_cpu(p[0]) << 32) |
- be32_to_cpu(p[1]);
- } else
- val = be64_to_cpu(((__be64 *) data)[0]);
- } else
- val = 0;
- if (!do_rc_ack(qp, aeth, psn, opcode, val) ||
- opcode != OP(RDMA_READ_RESPONSE_FIRST))
- goto ack_done;
- hdrsize += 4;
- wqe = get_swqe_ptr(qp, qp->s_last);
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- qp->r_flags &= ~IPATH_R_RDMAR_SEQ;
- /*
- * If this is a response to a resent RDMA read, we
- * have to be careful to copy the data to the right
- * location.
- */
- qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
- wqe, psn, pmtu);
- goto read_middle;
-
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- /* no AETH, no ACK */
- if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
- dev->n_rdma_seq++;
- if (qp->r_flags & IPATH_R_RDMAR_SEQ)
- goto ack_done;
- qp->r_flags |= IPATH_R_RDMAR_SEQ;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- goto ack_done;
- }
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- read_middle:
- if (unlikely(tlen != (hdrsize + pmtu + 4)))
- goto ack_len_err;
- if (unlikely(pmtu >= qp->s_rdma_read_len))
- goto ack_len_err;
-
- /* We got a response so update the timeout. */
- spin_lock(&dev->pending_lock);
- if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
- list_move_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
-
- if (opcode == OP(RDMA_READ_RESPONSE_MIDDLE))
- qp->s_retry = qp->s_retry_cnt;
-
- /*
- * Update the RDMA receive state but do the copy w/o
- * holding the locks and blocking interrupts.
- */
- qp->s_rdma_read_len -= pmtu;
- update_last_psn(qp, psn);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- ipath_copy_sge(&qp->s_rdma_read_sge, data, pmtu);
- goto bail;
-
- case OP(RDMA_READ_RESPONSE_ONLY):
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- if (!do_rc_ack(qp, aeth, psn, opcode, 0))
- goto ack_done;
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /*
- * Check that the data size is >= 0 && <= pmtu.
- * Remember to account for the AETH header (4) and
- * ICRC (4).
- */
- if (unlikely(tlen < (hdrsize + pad + 8)))
- goto ack_len_err;
- /*
- * If this is a response to a resent RDMA read, we
- * have to be careful to copy the data to the right
- * location.
- */
- wqe = get_swqe_ptr(qp, qp->s_last);
- qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
- wqe, psn, pmtu);
- goto read_last;
-
- case OP(RDMA_READ_RESPONSE_LAST):
- /* ACKs READ req. */
- if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
- dev->n_rdma_seq++;
- if (qp->r_flags & IPATH_R_RDMAR_SEQ)
- goto ack_done;
- qp->r_flags |= IPATH_R_RDMAR_SEQ;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- goto ack_done;
- }
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /*
- * Check that the data size is >= 1 && <= pmtu.
- * Remember to account for the AETH header (4) and
- * ICRC (4).
- */
- if (unlikely(tlen <= (hdrsize + pad + 8)))
- goto ack_len_err;
- read_last:
- tlen -= hdrsize + pad + 8;
- if (unlikely(tlen != qp->s_rdma_read_len))
- goto ack_len_err;
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- ipath_copy_sge(&qp->s_rdma_read_sge, data, tlen);
- (void) do_rc_ack(qp, aeth, psn,
- OP(RDMA_READ_RESPONSE_LAST), 0);
- goto ack_done;
- }
-
-ack_op_err:
- status = IB_WC_LOC_QP_OP_ERR;
- goto ack_err;
-
-ack_len_err:
- status = IB_WC_LOC_LEN_ERR;
-ack_err:
- ipath_send_complete(qp, wqe, status);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
-ack_done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-bail:
- return;
-}
-
-/**
- * ipath_rc_rcv_error - process an incoming duplicate or error RC packet
- * @dev: the device this packet came in on
- * @ohdr: the other headers for this packet
- * @data: the packet data
- * @qp: the QP for this packet
- * @opcode: the opcode for this packet
- * @psn: the packet sequence number for this packet
- * @diff: the difference between the PSN and the expected PSN
- * @header_in_data: true if part of the header data is in the data buffer
- *
- * This is called from ipath_rc_rcv() to process an unexpected
- * incoming RC packet for the given QP.
- * Called at interrupt level.
- * Return 1 if no more processing is needed; otherwise return 0 to
- * schedule a response to be sent.
- */
-static inline int ipath_rc_rcv_error(struct ipath_ibdev *dev,
- struct ipath_other_headers *ohdr,
- void *data,
- struct ipath_qp *qp,
- u32 opcode,
- u32 psn,
- int diff,
- int header_in_data)
-{
- struct ipath_ack_entry *e;
- u8 i, prev;
- int old_req;
- unsigned long flags;
-
- if (diff > 0) {
- /*
- * Packet sequence error.
- * A NAK will ACK earlier sends and RDMA writes.
- * Don't queue the NAK if we already sent one.
- */
- if (!qp->r_nak_state) {
- qp->r_nak_state = IB_NAK_PSN_ERROR;
- /* Use the expected PSN. */
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
- }
- goto done;
- }
-
- /*
- * Handle a duplicate request. Don't re-execute SEND, RDMA
- * write or atomic op. Don't NAK errors, just silently drop
- * the duplicate request. Note that r_sge, r_len, and
- * r_rcv_len may be in use so don't modify them.
- *
- * We are supposed to ACK the earliest duplicate PSN but we
- * can coalesce an outstanding duplicate ACK. We have to
- * send the earliest so that RDMA reads can be restarted at
- * the requester's expected PSN.
- *
- * First, find where this duplicate PSN falls within the
- * ACKs previously sent.
- */
- psn &= IPATH_PSN_MASK;
- e = NULL;
- old_req = 1;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this now that we hold the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock_done;
-
- for (i = qp->r_head_ack_queue; ; i = prev) {
- if (i == qp->s_tail_ack_queue)
- old_req = 0;
- if (i)
- prev = i - 1;
- else
- prev = IPATH_MAX_RDMA_ATOMIC;
- if (prev == qp->r_head_ack_queue) {
- e = NULL;
- break;
- }
- e = &qp->s_ack_queue[prev];
- if (!e->opcode) {
- e = NULL;
- break;
- }
- if (ipath_cmp24(psn, e->psn) >= 0) {
- if (prev == qp->s_tail_ack_queue)
- old_req = 0;
- break;
- }
- }
- switch (opcode) {
- case OP(RDMA_READ_REQUEST): {
- struct ib_reth *reth;
- u32 offset;
- u32 len;
-
- /*
- * If we didn't find the RDMA read request in the ack queue,
- * or the send tasklet is already backed up to send an
- * earlier entry, we can ignore this request.
- */
- if (!e || e->opcode != OP(RDMA_READ_REQUEST) || old_req)
- goto unlock_done;
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- /*
- * Address range must be a subset of the original
- * request and start on pmtu boundaries.
- * We reuse the old ack_queue slot since the requester
- * should not back up and request an earlier PSN for the
- * same request.
- */
- offset = ((psn - e->psn) & IPATH_PSN_MASK) *
- ib_mtu_enum_to_int(qp->path_mtu);
- len = be32_to_cpu(reth->length);
- if (unlikely(offset + len > e->rdma_sge.sge.sge_length))
- goto unlock_done;
- if (len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- ok = ipath_rkey_ok(qp, &e->rdma_sge,
- len, vaddr, rkey,
- IB_ACCESS_REMOTE_READ);
- if (unlikely(!ok))
- goto unlock_done;
- } else {
- e->rdma_sge.sg_list = NULL;
- e->rdma_sge.num_sge = 0;
- e->rdma_sge.sge.mr = NULL;
- e->rdma_sge.sge.vaddr = NULL;
- e->rdma_sge.sge.length = 0;
- e->rdma_sge.sge.sge_length = 0;
- }
- e->psn = psn;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = prev;
- break;
- }
-
- case OP(COMPARE_SWAP):
- case OP(FETCH_ADD): {
- /*
- * If we didn't find the atomic request in the ack queue
- * or the send tasklet is already backed up to send an
- * earlier entry, we can ignore this request.
- */
- if (!e || e->opcode != (u8) opcode || old_req)
- goto unlock_done;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = prev;
- break;
- }
-
- default:
- if (old_req)
- goto unlock_done;
- /*
- * Resend the most recent ACK if this request is
- * after all the previous RDMA reads and atomics.
- */
- if (i == qp->r_head_ack_queue) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- qp->r_nak_state = 0;
- qp->r_ack_psn = qp->r_psn - 1;
- goto send_ack;
- }
- /*
- * Try to send a simple ACK to work around a Mellanox bug
- * which doesn't accept a RDMA read response or atomic
- * response as an ACK for earlier SENDs or RDMA writes.
- */
- if (qp->r_head_ack_queue == qp->s_tail_ack_queue &&
- !(qp->s_flags & IPATH_S_ACK_PENDING) &&
- qp->s_ack_state == OP(ACKNOWLEDGE)) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- qp->r_nak_state = 0;
- qp->r_ack_psn = qp->s_ack_queue[i].psn - 1;
- goto send_ack;
- }
- /*
- * Resend the RDMA read or atomic op which
- * ACKs this duplicate request.
- */
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = i;
- break;
- }
- qp->r_nak_state = 0;
- ipath_schedule_send(qp);
-
-unlock_done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return 1;
-
-send_ack:
- return 0;
-}
-
-void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err)
-{
- unsigned long flags;
- int lastwqe;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- lastwqe = ipath_error_qp(qp, err);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = qp->ibqp.device;
- ev.element.qp = &qp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
- }
-}
-
-static inline void ipath_update_ack_queue(struct ipath_qp *qp, unsigned n)
-{
- unsigned next;
-
- next = n + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- if (n == qp->s_tail_ack_queue) {
- qp->s_tail_ack_queue = next;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- }
-}
-
-/**
- * ipath_rc_rcv - process an incoming RC packet
- * @dev: the device this packet came in on
- * @hdr: the header of this packet
- * @has_grh: true if the header has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP for this packet
- *
- * This is called from ipath_qp_rcv() to process an incoming RC packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- u32 opcode;
- u32 hdrsize;
- u32 psn;
- u32 pad;
- struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- int diff;
- struct ib_reth *reth;
- int header_in_data;
- unsigned long flags;
-
- /* Validate the SLID. See Ch. 9.6.1.5 */
- if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
- goto done;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12; /* LRH + BTH */
- psn = be32_to_cpu(ohdr->bth[2]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
- /*
- * The header with GRH is 60 bytes and the core driver sets
- * the eager header buffer size to 56 bytes so the last 4
- * bytes of the BTH header (PSN) is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- psn = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- } else
- psn = be32_to_cpu(ohdr->bth[2]);
- }
-
- /*
- * Process responses (ACKs) before anything else. Note that the
- * packet sequence number will be for something in the send work
- * queue rather than the expected receive packet sequence number.
- * In other words, this QP is the requester.
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) &&
- opcode <= OP(ATOMIC_ACKNOWLEDGE)) {
- ipath_rc_rcv_resp(dev, ohdr, data, tlen, qp, opcode, psn,
- hdrsize, pmtu, header_in_data);
- goto done;
- }
-
- /* Compute 24 bits worth of difference. */
- diff = ipath_cmp24(psn, qp->r_psn);
- if (unlikely(diff)) {
- if (ipath_rc_rcv_error(dev, ohdr, data, qp, opcode,
- psn, diff, header_in_data))
- goto done;
- goto send_ack;
- }
-
- /* Check for opcode sequence errors. */
- switch (qp->r_state) {
- case OP(SEND_FIRST):
- case OP(SEND_MIDDLE):
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE))
- break;
- goto nack_inv;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_MIDDLE):
- if (opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- break;
- goto nack_inv;
-
- default:
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- goto nack_inv;
- /*
- * Note that it is up to the requester to not send a new
- * RDMA read or atomic operation before receiving an ACK
- * for the previous operation.
- */
- break;
- }
-
- memset(&wc, 0, sizeof wc);
-
- /* OK, process the packet. */
- switch (opcode) {
- case OP(SEND_FIRST):
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- qp->r_rcv_len = 0;
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- case OP(RDMA_WRITE_MIDDLE):
- send_middle:
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4)))
- goto nack_inv;
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len))
- goto nack_inv;
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
- /* consume RWQE */
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- goto send_last_imm;
-
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- qp->r_rcv_len = 0;
- if (opcode == OP(SEND_ONLY))
- goto send_last;
- /* FALLTHROUGH */
- case OP(SEND_LAST_WITH_IMMEDIATE):
- send_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
- case OP(SEND_LAST):
- case OP(RDMA_WRITE_LAST):
- send_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4)))
- goto nack_inv;
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- wc.byte_len = tlen + qp->r_rcv_len;
- if (unlikely(wc.byte_len > qp->r_len))
- goto nack_inv;
- ipath_copy_sge(&qp->r_sge, data, tlen);
- qp->r_msn++;
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- break;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- else
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
- break;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE)))
- goto nack_inv;
- /* consume RWQE */
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- hdrsize += sizeof(*reth);
- qp->r_len = be32_to_cpu(reth->length);
- qp->r_rcv_len = 0;
- if (qp->r_len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey & NAK */
- ok = ipath_rkey_ok(qp, &qp->r_sge,
- qp->r_len, vaddr, rkey,
- IB_ACCESS_REMOTE_WRITE);
- if (unlikely(!ok))
- goto nack_acc;
- } else {
- qp->r_sge.sg_list = NULL;
- qp->r_sge.sge.mr = NULL;
- qp->r_sge.sge.vaddr = NULL;
- qp->r_sge.sge.length = 0;
- qp->r_sge.sge.sge_length = 0;
- }
- if (opcode == OP(RDMA_WRITE_FIRST))
- goto send_middle;
- else if (opcode == OP(RDMA_WRITE_ONLY))
- goto send_last;
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- goto send_last_imm;
-
- case OP(RDMA_READ_REQUEST): {
- struct ipath_ack_entry *e;
- u32 len;
- u8 next;
-
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_READ)))
- goto nack_inv;
- next = qp->r_head_ack_queue + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this while holding the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock;
- if (unlikely(next == qp->s_tail_ack_queue)) {
- if (!qp->s_ack_queue[next].sent)
- goto nack_inv_unlck;
- ipath_update_ack_queue(qp, next);
- }
- e = &qp->s_ack_queue[qp->r_head_ack_queue];
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- len = be32_to_cpu(reth->length);
- if (len) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey & NAK */
- ok = ipath_rkey_ok(qp, &e->rdma_sge, len, vaddr,
- rkey, IB_ACCESS_REMOTE_READ);
- if (unlikely(!ok))
- goto nack_acc_unlck;
- /*
- * Update the next expected PSN. We add 1 later
- * below, so only add the remainder here.
- */
- if (len > pmtu)
- qp->r_psn += (len - 1) / pmtu;
- } else {
- e->rdma_sge.sg_list = NULL;
- e->rdma_sge.num_sge = 0;
- e->rdma_sge.sge.mr = NULL;
- e->rdma_sge.sge.vaddr = NULL;
- e->rdma_sge.sge.length = 0;
- e->rdma_sge.sge.sge_length = 0;
- }
- e->opcode = opcode;
- e->sent = 0;
- e->psn = psn;
- /*
- * We need to increment the MSN here instead of when we
- * finish sending the result since a duplicate request would
- * increment it more than once.
- */
- qp->r_msn++;
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_nak_state = 0;
- qp->r_head_ack_queue = next;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
-
- goto unlock;
- }
-
- case OP(COMPARE_SWAP):
- case OP(FETCH_ADD): {
- struct ib_atomic_eth *ateth;
- struct ipath_ack_entry *e;
- u64 vaddr;
- atomic64_t *maddr;
- u64 sdata;
- u32 rkey;
- u8 next;
-
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_ATOMIC)))
- goto nack_inv;
- next = qp->r_head_ack_queue + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this while holding the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock;
- if (unlikely(next == qp->s_tail_ack_queue)) {
- if (!qp->s_ack_queue[next].sent)
- goto nack_inv_unlck;
- ipath_update_ack_queue(qp, next);
- }
- if (!header_in_data)
- ateth = &ohdr->u.atomic_eth;
- else
- ateth = (struct ib_atomic_eth *)data;
- vaddr = ((u64) be32_to_cpu(ateth->vaddr[0]) << 32) |
- be32_to_cpu(ateth->vaddr[1]);
- if (unlikely(vaddr & (sizeof(u64) - 1)))
- goto nack_inv_unlck;
- rkey = be32_to_cpu(ateth->rkey);
- /* Check rkey & NAK */
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge,
- sizeof(u64), vaddr, rkey,
- IB_ACCESS_REMOTE_ATOMIC)))
- goto nack_acc_unlck;
- /* Perform atomic OP and save result. */
- maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
- sdata = be64_to_cpu(ateth->swap_data);
- e = &qp->s_ack_queue[qp->r_head_ack_queue];
- e->atomic_data = (opcode == OP(FETCH_ADD)) ?
- (u64) atomic64_add_return(sdata, maddr) - sdata :
- (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
- be64_to_cpu(ateth->compare_data),
- sdata);
- e->opcode = opcode;
- e->sent = 0;
- e->psn = psn & IPATH_PSN_MASK;
- qp->r_msn++;
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_nak_state = 0;
- qp->r_head_ack_queue = next;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
-
- goto unlock;
- }
-
- default:
- /* NAK unknown opcodes. */
- goto nack_inv;
- }
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_ack_psn = psn;
- qp->r_nak_state = 0;
- /* Send an ACK if requested or required. */
- if (psn & (1 << 31))
- goto send_ack;
- goto done;
-
-rnr_nak:
- qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
-
-nack_inv_unlck:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-nack_inv:
- ipath_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
- qp->r_nak_state = IB_NAK_INVALID_REQUEST;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
-
-nack_acc_unlck:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-nack_acc:
- ipath_rc_error(qp, IB_WC_LOC_PROT_ERR);
- qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR;
- qp->r_ack_psn = qp->r_psn;
-send_ack:
- send_rc_ack(qp);
- goto done;
-
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_registers.h b/drivers/staging/rdma/ipath/ipath_registers.h
deleted file mode 100644
index 8f44d0c..0000000
--- a/drivers/staging/rdma/ipath/ipath_registers.h
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_REGISTERS_H
-#define _IPATH_REGISTERS_H
-
-/*
- * This file should only be included by kernel source, and by the diags. It
- * defines the registers, and their contents, for InfiniPath chips.
- */
-
-/*
- * These are the InfiniPath register and buffer bit definitions,
- * that are visible to software, and needed only by the kernel
- * and diag code. A few, that are visible to protocol and user
- * code are in ipath_common.h. Some bits are specific
- * to a given chip implementation, and have been moved to the
- * chip-specific source file
- */
-
-/* kr_revision bits */
-#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF
-#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0
-#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF
-#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8
-#define INFINIPATH_R_ARCH_MASK 0xFF
-#define INFINIPATH_R_ARCH_SHIFT 16
-#define INFINIPATH_R_SOFTWARE_MASK 0xFF
-#define INFINIPATH_R_SOFTWARE_SHIFT 24
-#define INFINIPATH_R_BOARDID_MASK 0xFF
-#define INFINIPATH_R_BOARDID_SHIFT 32
-
-/* kr_control bits */
-#define INFINIPATH_C_FREEZEMODE 0x00000002
-#define INFINIPATH_C_LINKENABLE 0x00000004
-
-/* kr_sendctrl bits */
-#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
-#define INFINIPATH_S_UPDTHRESH_SHIFT 24
-#define INFINIPATH_S_UPDTHRESH_MASK 0x1f
-
-#define IPATH_S_ABORT 0
-#define IPATH_S_PIOINTBUFAVAIL 1
-#define IPATH_S_PIOBUFAVAILUPD 2
-#define IPATH_S_PIOENABLE 3
-#define IPATH_S_SDMAINTENABLE 9
-#define IPATH_S_SDMASINGLEDESCRIPTOR 10
-#define IPATH_S_SDMAENABLE 11
-#define IPATH_S_SDMAHALT 12
-#define IPATH_S_DISARM 31
-
-#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
-#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
-#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
-#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
-#define INFINIPATH_S_SDMAINTENABLE (1U << IPATH_S_SDMAINTENABLE)
-#define INFINIPATH_S_SDMASINGLEDESCRIPTOR \
- (1U << IPATH_S_SDMASINGLEDESCRIPTOR)
-#define INFINIPATH_S_SDMAENABLE (1U << IPATH_S_SDMAENABLE)
-#define INFINIPATH_S_SDMAHALT (1U << IPATH_S_SDMAHALT)
-#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
-
-/* kr_rcvctrl bits that are the same on multiple chips */
-#define INFINIPATH_R_PORTENABLE_SHIFT 0
-#define INFINIPATH_R_QPMAP_ENABLE (1ULL << 38)
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_SDMAINT 0x8000000000000000ULL
-#define INFINIPATH_I_SDMADISABLED 0x4000000000000000ULL
-#define INFINIPATH_I_ERROR 0x0000000080000000ULL
-#define INFINIPATH_I_SPIOSENT 0x0000000040000000ULL
-#define INFINIPATH_I_SPIOBUFAVAIL 0x0000000020000000ULL
-#define INFINIPATH_I_GPIO 0x0000000010000000ULL
-#define INFINIPATH_I_JINT 0x0000000004000000ULL
-
-/* kr_errorstatus, kr_errorclear, kr_errormask bits */
-#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
-#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
-#define INFINIPATH_E_RICRC 0x0000000000000004ULL
-#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
-#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
-#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
-#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
-#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
-#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
-#define INFINIPATH_E_REBP 0x0000000000000200ULL
-#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
-#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
-#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
-#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
-#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
-#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
-#define INFINIPATH_E_RHDR 0x0000000000010000ULL
-#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
-#define INFINIPATH_E_SENDSPECIALTRIGGER 0x0000000008000000ULL
-#define INFINIPATH_E_SDMADISABLED 0x0000000010000000ULL
-#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
-#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
-#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
-#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
-#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
-#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
-#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
-#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
-#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
-#define INFINIPATH_E_SENDBUFMISUSE 0x0000004000000000ULL
-#define INFINIPATH_E_SDMAGENMISMATCH 0x0000008000000000ULL
-#define INFINIPATH_E_SDMAOUTOFBOUND 0x0000010000000000ULL
-#define INFINIPATH_E_SDMATAILOUTOFBOUND 0x0000020000000000ULL
-#define INFINIPATH_E_SDMABASE 0x0000040000000000ULL
-#define INFINIPATH_E_SDMA1STDESC 0x0000080000000000ULL
-#define INFINIPATH_E_SDMARPYTAG 0x0000100000000000ULL
-#define INFINIPATH_E_SDMADWEN 0x0000200000000000ULL
-#define INFINIPATH_E_SDMAMISSINGDW 0x0000400000000000ULL
-#define INFINIPATH_E_SDMAUNEXPDATA 0x0000800000000000ULL
-#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
-#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
-#define INFINIPATH_E_RESET 0x0004000000000000ULL
-#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
-#define INFINIPATH_E_SDMADESCADDRMISALIGN 0x0010000000000000ULL
-#define INFINIPATH_E_INVALIDEEPCMD 0x0020000000000000ULL
-
-/*
- * this is used to print "common" packet errors only when the
- * __IPATH_ERRPKTDBG bit is set in ipath_debug.
- */
-#define INFINIPATH_E_PKTERRS ( INFINIPATH_E_SPKTLEN \
- | INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_RVCRC \
- | INFINIPATH_E_RICRC | INFINIPATH_E_RSHORTPKTLEN \
- | INFINIPATH_E_REBP )
-
-/* Convenience for decoding Send DMA errors */
-#define INFINIPATH_E_SDMAERRS ( \
- INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND | \
- INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE | \
- INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG | \
- INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW | \
- INFINIPATH_E_SDMAUNEXPDATA | \
- INFINIPATH_E_SDMADESCADDRMISALIGN | \
- INFINIPATH_E_SDMADISABLED | \
- INFINIPATH_E_SENDBUFMISUSE)
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
- * RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: expTID, 3: eagerTID
- * bit 4: flag buffer, 5: datainfo, 6: header info */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40
-#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44
-#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL
-#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL
-/* txe mem parity errors (shift by INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF 0x1ULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC 0x2ULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOLAUNCHFIFO 0x4ULL
-/* rxe mem parity errors (shift by INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) */
-#define INFINIPATH_HWE_RXEMEMPARITYERR_RCVBUF 0x01ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_LOOKUPQ 0x02ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_EXPTID 0x04ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID 0x08ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_FLAGBUF 0x10ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_DATAINFO 0x20ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_HDRINFO 0x40ULL
-/* waldo specific -- find the rest in ipath_6110.c */
-#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
-/* 6120/7220 specific -- find the rest in ipath_6120.c and ipath_7220.c */
-#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
-
-/* kr_hwdiagctrl bits */
-#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL
-#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40
-#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL
-#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44
-#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL
-#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL
-#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL
-#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL
-#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL
-
-/* kr_ibcctrl bits */
-#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL
-#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0
-#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL
-#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
-#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
-#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
-/* wait for TS1, then go on */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
-#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
-#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
-#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
-#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
-#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
-#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
-#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
-#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20
-#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL
-#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32
-#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL
-#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36
-#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL
-#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40
-#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL
-#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
-
-/* kr_ibcstatus bits */
-#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
-#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
-
-#define INFINIPATH_IBCS_TXREADY 0x40000000
-#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
-/* link training states (shift by
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
-#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
-#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
-#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
-#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03
-#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04
-#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05
-#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08
-#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09
-#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a
-#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b
-#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
-#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
-#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
-/* link state machine states (shift by ibcs_ls_shift) */
-#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
-#define INFINIPATH_IBCS_L_STATE_INIT 0x1
-#define INFINIPATH_IBCS_L_STATE_ARM 0x2
-#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
-#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
-
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
-#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL
-#define INFINIPATH_EXTS_GPIOIN_SHIFT 48
-
-/* kr_extctrl bits */
-#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL
-#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32
-#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL
-#define INFINIPATH_EXTC_GPIOOE_SHIFT 48
-#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL
-#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL
-#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL
-#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL
-#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL
-#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL
-#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL
-#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL
-#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL
-#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL
-#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL
-#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
-#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
-
-/* kr_partitionkey bits */
-#define INFINIPATH_PKEY_SIZE 16
-#define INFINIPATH_PKEY_MASK 0xFFFF
-#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF
-
-/* kr_serdesconfig0 bits */
-#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
-#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
-/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL
-/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
-/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
-#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
-
-/* common kr_xgxsconfig bits (or safe in all, even if not implemented) */
-#define INFINIPATH_XGXS_RX_POL_SHIFT 19
-#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL
-
-
-/*
- * IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
- * PIO send buffers. This is well beyond anything currently
- * defined in the InfiniBand spec.
- */
-#define IPATH_PIO_MAXIBHDR 128
-
-typedef u64 ipath_err_t;
-
-/* The following change with the type of device, so
- * need to be part of the ipath_devdata struct, or
- * we could have problems plugging in devices of
- * different types (e.g. one HT, one PCIE)
- * in one system, to be managed by one driver.
- * On the other hand, this file is may also be included
- * by other code, so leave the declarations here
- * temporarily. Minor footprint issue if common-model
- * linker used, none if C89+ linker used.
- */
-
-/* mask of defined bits for various registers */
-extern u64 infinipath_i_bitsextant;
-extern ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant;
-
-/* masks that are different in various chips, or only exist in some chips */
-extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
-
-/*
- * These are the infinipath general register numbers (not offsets).
- * The kernel registers are used directly, those beyond the kernel
- * registers are calculated from one of the base registers. The use of
- * an integer type doesn't allow type-checking as thorough as, say,
- * an enum but allows for better hiding of chip differences.
- */
-typedef const u16 ipath_kreg, /* infinipath general registers */
- ipath_creg, /* infinipath counter registers */
- ipath_sreg; /* kernel-only, infinipath send registers */
-
-/*
- * These are the chip registers common to all infinipath chips, and
- * used both by the kernel and the diagnostics or other user code.
- * They are all implemented such that 64 bit accesses work.
- * Some implement no more than 32 bits. Because 64 bit reads
- * require 2 HT cmds on opteron, we access those with 32 bit
- * reads for efficiency (they are written as 64 bits, since
- * the extra 32 bits are nearly free on writes, and it slightly reduces
- * complexity). The rest are all accessed as 64 bits.
- */
-struct ipath_kregs {
- /* These are the 32 bit group */
- ipath_kreg kr_control;
- ipath_kreg kr_counterregbase;
- ipath_kreg kr_intmask;
- ipath_kreg kr_intstatus;
- ipath_kreg kr_pagealign;
- ipath_kreg kr_portcnt;
- ipath_kreg kr_rcvtidbase;
- ipath_kreg kr_rcvtidcnt;
- ipath_kreg kr_rcvegrbase;
- ipath_kreg kr_rcvegrcnt;
- ipath_kreg kr_scratch;
- ipath_kreg kr_sendctrl;
- ipath_kreg kr_sendpiobufbase;
- ipath_kreg kr_sendpiobufcnt;
- ipath_kreg kr_sendpiosize;
- ipath_kreg kr_sendregbase;
- ipath_kreg kr_userregbase;
- /* These are the 64 bit group */
- ipath_kreg kr_debugport;
- ipath_kreg kr_debugportselect;
- ipath_kreg kr_errorclear;
- ipath_kreg kr_errormask;
- ipath_kreg kr_errorstatus;
- ipath_kreg kr_extctrl;
- ipath_kreg kr_extstatus;
- ipath_kreg kr_gpio_clear;
- ipath_kreg kr_gpio_mask;
- ipath_kreg kr_gpio_out;
- ipath_kreg kr_gpio_status;
- ipath_kreg kr_hwdiagctrl;
- ipath_kreg kr_hwerrclear;
- ipath_kreg kr_hwerrmask;
- ipath_kreg kr_hwerrstatus;
- ipath_kreg kr_ibcctrl;
- ipath_kreg kr_ibcstatus;
- ipath_kreg kr_intblocked;
- ipath_kreg kr_intclear;
- ipath_kreg kr_interruptconfig;
- ipath_kreg kr_mdio;
- ipath_kreg kr_partitionkey;
- ipath_kreg kr_rcvbthqp;
- ipath_kreg kr_rcvbufbase;
- ipath_kreg kr_rcvbufsize;
- ipath_kreg kr_rcvctrl;
- ipath_kreg kr_rcvhdrcnt;
- ipath_kreg kr_rcvhdrentsize;
- ipath_kreg kr_rcvhdrsize;
- ipath_kreg kr_rcvintmembase;
- ipath_kreg kr_rcvintmemsize;
- ipath_kreg kr_revision;
- ipath_kreg kr_sendbuffererror;
- ipath_kreg kr_sendpioavailaddr;
- ipath_kreg kr_serdesconfig0;
- ipath_kreg kr_serdesconfig1;
- ipath_kreg kr_serdesstatus;
- ipath_kreg kr_txintmembase;
- ipath_kreg kr_txintmemsize;
- ipath_kreg kr_xgxsconfig;
- ipath_kreg kr_ibpllcfg;
- /* use these two (and the following N ports) only with
- * ipath_k*_kreg64_port(); not *kreg64() */
- ipath_kreg kr_rcvhdraddr;
- ipath_kreg kr_rcvhdrtailaddr;
-
- /* remaining registers are not present on all types of infinipath
- chips */
- ipath_kreg kr_rcvpktledcnt;
- ipath_kreg kr_pcierbuftestreg0;
- ipath_kreg kr_pcierbuftestreg1;
- ipath_kreg kr_pcieq0serdesconfig0;
- ipath_kreg kr_pcieq0serdesconfig1;
- ipath_kreg kr_pcieq0serdesstatus;
- ipath_kreg kr_pcieq1serdesconfig0;
- ipath_kreg kr_pcieq1serdesconfig1;
- ipath_kreg kr_pcieq1serdesstatus;
- ipath_kreg kr_hrtbt_guid;
- ipath_kreg kr_ibcddrctrl;
- ipath_kreg kr_ibcddrstatus;
- ipath_kreg kr_jintreload;
-
- /* send dma related regs */
- ipath_kreg kr_senddmabase;
- ipath_kreg kr_senddmalengen;
- ipath_kreg kr_senddmatail;
- ipath_kreg kr_senddmahead;
- ipath_kreg kr_senddmaheadaddr;
- ipath_kreg kr_senddmabufmask0;
- ipath_kreg kr_senddmabufmask1;
- ipath_kreg kr_senddmabufmask2;
- ipath_kreg kr_senddmastatus;
-
- /* SerDes related regs (IBA7220-only) */
- ipath_kreg kr_ibserdesctrl;
- ipath_kreg kr_ib_epbacc;
- ipath_kreg kr_ib_epbtrans;
- ipath_kreg kr_pcie_epbacc;
- ipath_kreg kr_pcie_epbtrans;
- ipath_kreg kr_ib_ddsrxeq;
-};
-
-struct ipath_cregs {
- ipath_creg cr_badformatcnt;
- ipath_creg cr_erricrccnt;
- ipath_creg cr_errlinkcnt;
- ipath_creg cr_errlpcrccnt;
- ipath_creg cr_errpkey;
- ipath_creg cr_errrcvflowctrlcnt;
- ipath_creg cr_err_rlencnt;
- ipath_creg cr_errslencnt;
- ipath_creg cr_errtidfull;
- ipath_creg cr_errtidvalid;
- ipath_creg cr_errvcrccnt;
- ipath_creg cr_ibstatuschange;
- ipath_creg cr_intcnt;
- ipath_creg cr_invalidrlencnt;
- ipath_creg cr_invalidslencnt;
- ipath_creg cr_lbflowstallcnt;
- ipath_creg cr_iblinkdowncnt;
- ipath_creg cr_iblinkerrrecovcnt;
- ipath_creg cr_ibsymbolerrcnt;
- ipath_creg cr_pktrcvcnt;
- ipath_creg cr_pktrcvflowctrlcnt;
- ipath_creg cr_pktsendcnt;
- ipath_creg cr_pktsendflowcnt;
- ipath_creg cr_portovflcnt;
- ipath_creg cr_rcvebpcnt;
- ipath_creg cr_rcvovflcnt;
- ipath_creg cr_rxdroppktcnt;
- ipath_creg cr_senddropped;
- ipath_creg cr_sendstallcnt;
- ipath_creg cr_sendunderruncnt;
- ipath_creg cr_unsupvlcnt;
- ipath_creg cr_wordrcvcnt;
- ipath_creg cr_wordsendcnt;
- ipath_creg cr_vl15droppedpktcnt;
- ipath_creg cr_rxotherlocalphyerrcnt;
- ipath_creg cr_excessbufferovflcnt;
- ipath_creg cr_locallinkintegrityerrcnt;
- ipath_creg cr_rxvlerrcnt;
- ipath_creg cr_rxdlidfltrcnt;
- ipath_creg cr_psstat;
- ipath_creg cr_psstart;
- ipath_creg cr_psinterval;
- ipath_creg cr_psrcvdatacount;
- ipath_creg cr_psrcvpktscount;
- ipath_creg cr_psxmitdatacount;
- ipath_creg cr_psxmitpktscount;
- ipath_creg cr_psxmitwaitcount;
-};
-
-#endif /* _IPATH_REGISTERS_H */
diff --git a/drivers/staging/rdma/ipath/ipath_ruc.c b/drivers/staging/rdma/ipath/ipath_ruc.c
deleted file mode 100644
index e541a01..0000000
--- a/drivers/staging/rdma/ipath/ipath_ruc.c
+++ /dev/null
@@ -1,733 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/spinlock.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/*
- * Convert the AETH RNR timeout code into the number of milliseconds.
- */
-const u32 ib_ipath_rnr_table[32] = {
- 656, /* 0 */
- 1, /* 1 */
- 1, /* 2 */
- 1, /* 3 */
- 1, /* 4 */
- 1, /* 5 */
- 1, /* 6 */
- 1, /* 7 */
- 1, /* 8 */
- 1, /* 9 */
- 1, /* A */
- 1, /* B */
- 1, /* C */
- 1, /* D */
- 2, /* E */
- 2, /* F */
- 3, /* 10 */
- 4, /* 11 */
- 6, /* 12 */
- 8, /* 13 */
- 11, /* 14 */
- 16, /* 15 */
- 21, /* 16 */
- 31, /* 17 */
- 41, /* 18 */
- 62, /* 19 */
- 82, /* 1A */
- 123, /* 1B */
- 164, /* 1C */
- 246, /* 1D */
- 328, /* 1E */
- 492 /* 1F */
-};
-
-/**
- * ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
- * @qp: the QP
- *
- * Called with the QP s_lock held and interrupts disabled.
- * XXX Use a simple list for now. We might need a priority
- * queue if we have lots of QPs waiting for RNR timeouts
- * but that should be rare.
- */
-void ipath_insert_rnr_queue(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-
- /* We already did a spin_lock_irqsave(), so just use spin_lock */
- spin_lock(&dev->pending_lock);
- if (list_empty(&dev->rnrwait))
- list_add(&qp->timerwait, &dev->rnrwait);
- else {
- struct list_head *l = &dev->rnrwait;
- struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
- timerwait);
-
- while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
- qp->s_rnr_timeout -= nqp->s_rnr_timeout;
- l = l->next;
- if (l->next == &dev->rnrwait) {
- nqp = NULL;
- break;
- }
- nqp = list_entry(l->next, struct ipath_qp,
- timerwait);
- }
- if (nqp)
- nqp->s_rnr_timeout -= qp->s_rnr_timeout;
- list_add(&qp->timerwait, l);
- }
- spin_unlock(&dev->pending_lock);
-}
-
-/**
- * ipath_init_sge - Validate a RWQE and fill in the SGE state
- * @qp: the QP
- *
- * Return 1 if OK.
- */
-int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
- u32 *lengthp, struct ipath_sge_state *ss)
-{
- int i, j, ret;
- struct ib_wc wc;
-
- *lengthp = 0;
- for (i = j = 0; i < wqe->num_sge; i++) {
- if (wqe->sg_list[i].length == 0)
- continue;
- /* Check LKEY */
- if (!ipath_lkey_ok(qp, j ? &ss->sg_list[j - 1] : &ss->sge,
- &wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE))
- goto bad_lkey;
- *lengthp += wqe->sg_list[i].length;
- j++;
- }
- ss->num_sge = j;
- ret = 1;
- goto bail;
-
-bad_lkey:
- memset(&wc, 0, sizeof(wc));
- wc.wr_id = wqe->wr_id;
- wc.status = IB_WC_LOC_PROT_ERR;
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- /* Signal solicited completion event. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_get_rwqe - copy the next RWQE into the QP's RWQE
- * @qp: the QP
- * @wr_id_only: update qp->r_wr_id only, not qp->r_sge
- *
- * Return 0 if no RWQE is available, otherwise return 1.
- *
- * Can be called from interrupt level.
- */
-int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
-{
- unsigned long flags;
- struct ipath_rq *rq;
- struct ipath_rwq *wq;
- struct ipath_srq *srq;
- struct ipath_rwqe *wqe;
- void (*handler)(struct ib_event *, void *);
- u32 tail;
- int ret;
-
- if (qp->ibqp.srq) {
- srq = to_isrq(qp->ibqp.srq);
- handler = srq->ibsrq.event_handler;
- rq = &srq->rq;
- } else {
- srq = NULL;
- handler = NULL;
- rq = &qp->r_rq;
- }
-
- spin_lock_irqsave(&rq->lock, flags);
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- ret = 0;
- goto unlock;
- }
-
- wq = rq->wq;
- tail = wq->tail;
- /* Validate tail before using it since it is user writable. */
- if (tail >= rq->size)
- tail = 0;
- do {
- if (unlikely(tail == wq->head)) {
- ret = 0;
- goto unlock;
- }
- /* Make sure entry is read after head index is read. */
- smp_rmb();
- wqe = get_rwqe_ptr(rq, tail);
- if (++tail >= rq->size)
- tail = 0;
- if (wr_id_only)
- break;
- qp->r_sge.sg_list = qp->r_sg_list;
- } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
- qp->r_wr_id = wqe->wr_id;
- wq->tail = tail;
-
- ret = 1;
- set_bit(IPATH_R_WRID_VALID, &qp->r_aflags);
- if (handler) {
- u32 n;
-
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- n = wq->head;
- if (n >= rq->size)
- n = 0;
- if (n < tail)
- n += rq->size - tail;
- else
- n -= tail;
- if (n < srq->limit) {
- struct ib_event ev;
-
- srq->limit = 0;
- spin_unlock_irqrestore(&rq->lock, flags);
- ev.device = qp->ibqp.device;
- ev.element.srq = qp->ibqp.srq;
- ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
- handler(&ev, srq->ibsrq.srq_context);
- goto bail;
- }
- }
-unlock:
- spin_unlock_irqrestore(&rq->lock, flags);
-bail:
- return ret;
-}
-
-/**
- * ipath_ruc_loopback - handle UC and RC lookback requests
- * @sqp: the sending QP
- *
- * This is called from ipath_do_send() to
- * forward a WQE addressed to the same HCA.
- * Note that although we are single threaded due to the tasklet, we still
- * have to protect against post_send(). We don't have to worry about
- * receive interrupts since this is a connected protocol and all packets
- * will pass through here.
- */
-static void ipath_ruc_loopback(struct ipath_qp *sqp)
-{
- struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
- struct ipath_qp *qp;
- struct ipath_swqe *wqe;
- struct ipath_sge *sge;
- unsigned long flags;
- struct ib_wc wc;
- u64 sdata;
- atomic64_t *maddr;
- enum ib_wc_status send_status;
-
- /*
- * Note that we check the responder QP state after
- * checking the requester's state.
- */
- qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
-
- spin_lock_irqsave(&sqp->s_lock, flags);
-
- /* Return if we are already busy processing a work request. */
- if ((sqp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
- !(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
- goto unlock;
-
- sqp->s_flags |= IPATH_S_BUSY;
-
-again:
- if (sqp->s_last == sqp->s_head)
- goto clr_busy;
- wqe = get_swqe_ptr(sqp, sqp->s_last);
-
- /* Return if it is not OK to start a new work reqeust. */
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
- goto clr_busy;
- /* We are in the error state, flush the work request. */
- send_status = IB_WC_WR_FLUSH_ERR;
- goto flush_send;
- }
-
- /*
- * We can rely on the entry not changing without the s_lock
- * being held until we update s_last.
- * We increment s_cur to indicate s_last is in progress.
- */
- if (sqp->s_last == sqp->s_cur) {
- if (++sqp->s_cur >= sqp->s_size)
- sqp->s_cur = 0;
- }
- spin_unlock_irqrestore(&sqp->s_lock, flags);
-
- if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- /*
- * For RC, the requester would timeout and retry so
- * shortcut the timeouts and just signal too many retries.
- */
- if (sqp->ibqp.qp_type == IB_QPT_RC)
- send_status = IB_WC_RETRY_EXC_ERR;
- else
- send_status = IB_WC_SUCCESS;
- goto serr;
- }
-
- memset(&wc, 0, sizeof wc);
- send_status = IB_WC_SUCCESS;
-
- sqp->s_sge.sge = wqe->sg_list[0];
- sqp->s_sge.sg_list = wqe->sg_list + 1;
- sqp->s_sge.num_sge = wqe->wr.num_sge;
- sqp->s_len = wqe->length;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND_WITH_IMM:
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = wqe->wr.ex.imm_data;
- /* FALLTHROUGH */
- case IB_WR_SEND:
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- break;
-
- case IB_WR_RDMA_WRITE_WITH_IMM:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
- goto inv_err;
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = wqe->wr.ex.imm_data;
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- /* FALLTHROUGH */
- case IB_WR_RDMA_WRITE:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
- goto inv_err;
- if (wqe->length == 0)
- break;
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length,
- wqe->rdma_wr.remote_addr,
- wqe->rdma_wr.rkey,
- IB_ACCESS_REMOTE_WRITE)))
- goto acc_err;
- break;
-
- case IB_WR_RDMA_READ:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ)))
- goto inv_err;
- if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length,
- wqe->rdma_wr.remote_addr,
- wqe->rdma_wr.rkey,
- IB_ACCESS_REMOTE_READ)))
- goto acc_err;
- qp->r_sge.sge = wqe->sg_list[0];
- qp->r_sge.sg_list = wqe->sg_list + 1;
- qp->r_sge.num_sge = wqe->wr.num_sge;
- break;
-
- case IB_WR_ATOMIC_CMP_AND_SWP:
- case IB_WR_ATOMIC_FETCH_AND_ADD:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
- goto inv_err;
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64),
- wqe->atomic_wr.remote_addr,
- wqe->atomic_wr.rkey,
- IB_ACCESS_REMOTE_ATOMIC)))
- goto acc_err;
- /* Perform atomic OP and save result. */
- maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
- sdata = wqe->atomic_wr.compare_add;
- *(u64 *) sqp->s_sge.sge.vaddr =
- (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ?
- (u64) atomic64_add_return(sdata, maddr) - sdata :
- (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
- sdata, wqe->atomic_wr.swap);
- goto send_comp;
-
- default:
- send_status = IB_WC_LOC_QP_OP_ERR;
- goto serr;
- }
-
- sge = &sqp->s_sge.sge;
- while (sqp->s_len) {
- u32 len = sqp->s_len;
-
- if (len > sge->length)
- len = sge->length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--sqp->s_sge.num_sge)
- *sge = *sqp->s_sge.sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- sqp->s_len -= len;
- }
-
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- goto send_comp;
-
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- else
- wc.opcode = IB_WC_RECV;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.byte_len = wqe->length;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- wqe->wr.send_flags & IB_SEND_SOLICITED);
-
-send_comp:
- spin_lock_irqsave(&sqp->s_lock, flags);
-flush_send:
- sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
- ipath_send_complete(sqp, wqe, send_status);
- goto again;
-
-rnr_nak:
- /* Handle RNR NAK */
- if (qp->ibqp.qp_type == IB_QPT_UC)
- goto send_comp;
- /*
- * Note: we don't need the s_lock held since the BUSY flag
- * makes this single threaded.
- */
- if (sqp->s_rnr_retry == 0) {
- send_status = IB_WC_RNR_RETRY_EXC_ERR;
- goto serr;
- }
- if (sqp->s_rnr_retry_cnt < 7)
- sqp->s_rnr_retry--;
- spin_lock_irqsave(&sqp->s_lock, flags);
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_RECV_OK))
- goto clr_busy;
- sqp->s_flags |= IPATH_S_WAITING;
- dev->n_rnr_naks++;
- sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer];
- ipath_insert_rnr_queue(sqp);
- goto clr_busy;
-
-inv_err:
- send_status = IB_WC_REM_INV_REQ_ERR;
- wc.status = IB_WC_LOC_QP_OP_ERR;
- goto err;
-
-acc_err:
- send_status = IB_WC_REM_ACCESS_ERR;
- wc.status = IB_WC_LOC_PROT_ERR;
-err:
- /* responder goes to error state */
- ipath_rc_error(qp, wc.status);
-
-serr:
- spin_lock_irqsave(&sqp->s_lock, flags);
- ipath_send_complete(sqp, wqe, send_status);
- if (sqp->ibqp.qp_type == IB_QPT_RC) {
- int lastwqe = ipath_error_qp(sqp, IB_WC_WR_FLUSH_ERR);
-
- sqp->s_flags &= ~IPATH_S_BUSY;
- spin_unlock_irqrestore(&sqp->s_lock, flags);
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = sqp->ibqp.device;
- ev.element.qp = &sqp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context);
- }
- goto done;
- }
-clr_busy:
- sqp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&sqp->s_lock, flags);
-done:
- if (qp && atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-}
-
-static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
-{
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
- qp->ibqp.qp_type == IB_QPT_SMI) {
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-}
-
-/**
- * ipath_no_bufs_available - tell the layer driver we need buffers
- * @qp: the QP that caused the problem
- * @dev: the device we ran out of buffers on
- *
- * Called when we run out of PIO buffers.
- * If we are now in the error state, return zero to flush the
- * send work request.
- */
-static int ipath_no_bufs_available(struct ipath_qp *qp,
- struct ipath_ibdev *dev)
-{
- unsigned long flags;
- int ret = 1;
-
- /*
- * Note that as soon as want_buffer() is called and
- * possibly before it returns, ipath_ib_piobufavail()
- * could be called. Therefore, put QP on the piowait list before
- * enabling the PIO avail interrupt.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
- dev->n_piowait++;
- qp->s_flags |= IPATH_S_WAITING;
- qp->s_flags &= ~IPATH_S_BUSY;
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->piowait))
- list_add_tail(&qp->piowait, &dev->piowait);
- spin_unlock(&dev->pending_lock);
- } else
- ret = 0;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- if (ret)
- want_buffer(dev->dd, qp);
- return ret;
-}
-
-/**
- * ipath_make_grh - construct a GRH header
- * @dev: a pointer to the ipath device
- * @hdr: a pointer to the GRH header being constructed
- * @grh: the global route address to send to
- * @hwords: the number of 32 bit words of header being sent
- * @nwords: the number of 32 bit words of data being sent
- *
- * Return the size of the header in 32 bit words.
- */
-u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
- struct ib_global_route *grh, u32 hwords, u32 nwords)
-{
- hdr->version_tclass_flow =
- cpu_to_be32((6 << 28) |
- (grh->traffic_class << 20) |
- grh->flow_label);
- hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2);
- /* next_hdr is defined by C8-7 in ch. 8.4.1 */
- hdr->next_hdr = 0x1B;
- hdr->hop_limit = grh->hop_limit;
- /* The SGID is 32-bit aligned. */
- hdr->sgid.global.subnet_prefix = dev->gid_prefix;
- hdr->sgid.global.interface_id = dev->dd->ipath_guid;
- hdr->dgid = grh->dgid;
-
- /* GRH header size in 32-bit words. */
- return sizeof(struct ib_grh) / sizeof(u32);
-}
-
-void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 bth0, u32 bth2)
-{
- u16 lrh0;
- u32 nwords;
- u32 extra_bytes;
-
- /* Construct the header. */
- extra_bytes = -qp->s_cur_size & 3;
- nwords = (qp->s_cur_size + extra_bytes) >> 2;
- lrh0 = IPATH_LRH_BTH;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
- &qp->remote_ah_attr.grh,
- qp->s_hdrwords, nwords);
- lrh0 = IPATH_LRH_GRH;
- }
- lrh0 |= qp->remote_ah_attr.sl << 4;
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC);
- qp->s_hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid |
- qp->remote_ah_attr.src_path_bits);
- bth0 |= ipath_get_pkey(dev->dd, qp->s_pkey_index);
- bth0 |= extra_bytes << 20;
- ohdr->bth[0] = cpu_to_be32(bth0 | (1 << 22));
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(bth2);
-}
-
-/**
- * ipath_do_send - perform a send on a QP
- * @data: contains a pointer to the QP
- *
- * Process entries in the send work queue until credit or queue is
- * exhausted. Only allow one CPU to send a packet per QP (tasklet).
- * Otherwise, two threads could send packets out of order.
- */
-void ipath_do_send(unsigned long data)
-{
- struct ipath_qp *qp = (struct ipath_qp *)data;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- int (*make_req)(struct ipath_qp *qp);
- unsigned long flags;
-
- if ((qp->ibqp.qp_type == IB_QPT_RC ||
- qp->ibqp.qp_type == IB_QPT_UC) &&
- qp->remote_ah_attr.dlid == dev->dd->ipath_lid) {
- ipath_ruc_loopback(qp);
- goto bail;
- }
-
- if (qp->ibqp.qp_type == IB_QPT_RC)
- make_req = ipath_make_rc_req;
- else if (qp->ibqp.qp_type == IB_QPT_UC)
- make_req = ipath_make_uc_req;
- else
- make_req = ipath_make_ud_req;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Return if we are already busy processing a work request. */
- if ((qp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
- !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND)) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- goto bail;
- }
-
- qp->s_flags |= IPATH_S_BUSY;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
-again:
- /* Check for a constructed packet to be sent. */
- if (qp->s_hdrwords != 0) {
- /*
- * If no PIO bufs are available, return. An interrupt will
- * call ipath_ib_piobufavail() when one is available.
- */
- if (ipath_verbs_send(qp, &qp->s_hdr, qp->s_hdrwords,
- qp->s_cur_sge, qp->s_cur_size)) {
- if (ipath_no_bufs_available(qp, dev))
- goto bail;
- }
- dev->n_unicast_xmit++;
- /* Record that we sent the packet and s_hdr is empty. */
- qp->s_hdrwords = 0;
- }
-
- if (make_req(qp))
- goto again;
-
-bail:;
-}
-
-/*
- * This should be called with s_lock held.
- */
-void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
- enum ib_wc_status status)
-{
- u32 old_last, last;
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
- return;
-
- /* See ch. 11.2.4.1 and 10.7.3.1 */
- if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
- (wqe->wr.send_flags & IB_SEND_SIGNALED) ||
- status != IB_WC_SUCCESS) {
- struct ib_wc wc;
-
- memset(&wc, 0, sizeof wc);
- wc.wr_id = wqe->wr.wr_id;
- wc.status = status;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.qp = &qp->ibqp;
- if (status == IB_WC_SUCCESS)
- wc.byte_len = wqe->length;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc,
- status != IB_WC_SUCCESS);
- }
-
- old_last = last = qp->s_last;
- if (++last >= qp->s_size)
- last = 0;
- qp->s_last = last;
- if (qp->s_cur == old_last)
- qp->s_cur = last;
- if (qp->s_tail == old_last)
- qp->s_tail = last;
- if (qp->state == IB_QPS_SQD && last == qp->s_cur)
- qp->s_draining = 0;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_sdma.c b/drivers/staging/rdma/ipath/ipath_sdma.c
deleted file mode 100644
index 1ffc06a..0000000
--- a/drivers/staging/rdma/ipath/ipath_sdma.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-#define SDMA_DESCQ_SZ PAGE_SIZE /* 256 entries per 4KB page */
-
-static void vl15_watchdog_enq(struct ipath_devdata *dd)
-{
- /* ipath_sdma_lock must already be held */
- if (atomic_inc_return(&dd->ipath_sdma_vl15_count) == 1) {
- unsigned long interval = (HZ + 19) / 20;
- dd->ipath_sdma_vl15_timer.expires = jiffies + interval;
- add_timer(&dd->ipath_sdma_vl15_timer);
- }
-}
-
-static void vl15_watchdog_deq(struct ipath_devdata *dd)
-{
- /* ipath_sdma_lock must already be held */
- if (atomic_dec_return(&dd->ipath_sdma_vl15_count) != 0) {
- unsigned long interval = (HZ + 19) / 20;
- mod_timer(&dd->ipath_sdma_vl15_timer, jiffies + interval);
- } else {
- del_timer(&dd->ipath_sdma_vl15_timer);
- }
-}
-
-static void vl15_watchdog_timeout(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (atomic_read(&dd->ipath_sdma_vl15_count) != 0) {
- ipath_dbg("vl15 watchdog timeout - clearing\n");
- ipath_cancel_sends(dd, 1);
- ipath_hol_down(dd);
- } else {
- ipath_dbg("vl15 watchdog timeout - "
- "condition already cleared\n");
- }
-}
-
-static void unmap_desc(struct ipath_devdata *dd, unsigned head)
-{
- __le64 *descqp = &dd->ipath_sdma_descq[head].qw[0];
- u64 desc[2];
- dma_addr_t addr;
- size_t len;
-
- desc[0] = le64_to_cpu(descqp[0]);
- desc[1] = le64_to_cpu(descqp[1]);
-
- addr = (desc[1] << 32) | (desc[0] >> 32);
- len = (desc[0] >> 14) & (0x7ffULL << 2);
- dma_unmap_single(&dd->pcidev->dev, addr, len, DMA_TO_DEVICE);
-}
-
-/*
- * ipath_sdma_lock should be locked before calling this.
- */
-int ipath_sdma_make_progress(struct ipath_devdata *dd)
-{
- struct list_head *lp = NULL;
- struct ipath_sdma_txreq *txp = NULL;
- u16 dmahead;
- u16 start_idx = 0;
- int progress = 0;
-
- if (!list_empty(&dd->ipath_sdma_activelist)) {
- lp = dd->ipath_sdma_activelist.next;
- txp = list_entry(lp, struct ipath_sdma_txreq, list);
- start_idx = txp->start_idx;
- }
-
- /*
- * Read the SDMA head register in order to know that the
- * interrupt clear has been written to the chip.
- * Otherwise, we may not get an interrupt for the last
- * descriptor in the queue.
- */
- dmahead = (u16)ipath_read_kreg32(dd, dd->ipath_kregs->kr_senddmahead);
- /* sanity check return value for error handling (chip reset, etc.) */
- if (dmahead >= dd->ipath_sdma_descq_cnt)
- goto done;
-
- while (dd->ipath_sdma_descq_head != dmahead) {
- if (txp && txp->flags & IPATH_SDMA_TXREQ_F_FREEDESC &&
- dd->ipath_sdma_descq_head == start_idx) {
- unmap_desc(dd, dd->ipath_sdma_descq_head);
- start_idx++;
- if (start_idx == dd->ipath_sdma_descq_cnt)
- start_idx = 0;
- }
-
- /* increment free count and head */
- dd->ipath_sdma_descq_removed++;
- if (++dd->ipath_sdma_descq_head == dd->ipath_sdma_descq_cnt)
- dd->ipath_sdma_descq_head = 0;
-
- if (txp && txp->next_descq_idx == dd->ipath_sdma_descq_head) {
- /* move to notify list */
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(lp, &dd->ipath_sdma_notifylist);
- if (!list_empty(&dd->ipath_sdma_activelist)) {
- lp = dd->ipath_sdma_activelist.next;
- txp = list_entry(lp, struct ipath_sdma_txreq,
- list);
- start_idx = txp->start_idx;
- } else {
- lp = NULL;
- txp = NULL;
- }
- }
- progress = 1;
- }
-
- if (progress)
- tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
-
-done:
- return progress;
-}
-
-static void ipath_sdma_notify(struct ipath_devdata *dd, struct list_head *list)
-{
- struct ipath_sdma_txreq *txp, *txp_next;
-
- list_for_each_entry_safe(txp, txp_next, list, list) {
- list_del_init(&txp->list);
-
- if (txp->callback)
- (*txp->callback)(txp->callback_cookie,
- txp->callback_status);
- }
-}
-
-static void sdma_notify_taskbody(struct ipath_devdata *dd)
-{
- unsigned long flags;
- struct list_head list;
-
- INIT_LIST_HEAD(&list);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- list_splice_init(&dd->ipath_sdma_notifylist, &list);
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- ipath_sdma_notify(dd, &list);
-
- /*
- * The IB verbs layer needs to see the callback before getting
- * the call to ipath_ib_piobufavail() because the callback
- * handles releasing resources the next send will need.
- * Otherwise, we could do these calls in
- * ipath_sdma_make_progress().
- */
- ipath_ib_piobufavail(dd->verbs_dev);
-}
-
-static void sdma_notify_task(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- sdma_notify_taskbody(dd);
-}
-
-static void dump_sdma_state(struct ipath_devdata *dd)
-{
- unsigned long reg;
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus);
- ipath_cdbg(VERBOSE, "kr_senddmastatus: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendctrl);
- ipath_cdbg(VERBOSE, "kr_sendctrl: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask0);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask0: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask1);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask1: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask2);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask2: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
- ipath_cdbg(VERBOSE, "kr_senddmatail: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
- ipath_cdbg(VERBOSE, "kr_senddmahead: 0x%016lx\n", reg);
-}
-
-static void sdma_abort_task(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
- u64 status;
- unsigned long flags;
-
- if (test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- return;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- status = dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK;
-
- /* nothing to do */
- if (status == IPATH_SDMA_ABORT_NONE)
- goto unlock;
-
- /* ipath_sdma_abort() is done, waiting for interrupt */
- if (status == IPATH_SDMA_ABORT_DISARMED) {
- if (time_before(jiffies, dd->ipath_sdma_abort_intr_timeout))
- goto resched_noprint;
- /* give up, intr got lost somewhere */
- ipath_dbg("give up waiting for SDMADISABLED intr\n");
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- status = IPATH_SDMA_ABORT_ABORTED;
- }
-
- /* everything is stopped, time to clean up and restart */
- if (status == IPATH_SDMA_ABORT_ABORTED) {
- struct ipath_sdma_txreq *txp, *txpnext;
- u64 hwstatus;
- int notify = 0;
-
- hwstatus = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_senddmastatus);
-
- if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
- IPATH_SDMA_STATUS_ABORT_IN_PROG |
- IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
- !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
- if (dd->ipath_sdma_reset_wait > 0) {
- /* not done shutting down sdma */
- --dd->ipath_sdma_reset_wait;
- goto resched;
- }
- ipath_cdbg(VERBOSE, "gave up waiting for quiescent "
- "status after SDMA reset, continuing\n");
- dump_sdma_state(dd);
- }
-
- /* dequeue all "sent" requests */
- list_for_each_entry_safe(txp, txpnext,
- &dd->ipath_sdma_activelist, list) {
- txp->callback_status = IPATH_SDMA_TXREQ_S_ABORTED;
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
- notify = 1;
- }
- if (notify)
- tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
-
- /* reset our notion of head and tail */
- dd->ipath_sdma_descq_tail = 0;
- dd->ipath_sdma_descq_head = 0;
- dd->ipath_sdma_head_dma[0] = 0;
- dd->ipath_sdma_generation = 0;
- dd->ipath_sdma_descq_removed = dd->ipath_sdma_descq_added;
-
- /* Reset SendDmaLenGen */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen,
- (u64) dd->ipath_sdma_descq_cnt | (1ULL << 18));
-
- /* done with sdma state for a bit */
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- /*
- * Don't restart sdma here (with the exception
- * below). Wait until link is up to ACTIVE. VL15 MADs
- * used to bring the link up use PIO, and multiple link
- * transitions otherwise cause the sdma engine to be
- * stopped and started multiple times.
- * The disable is done here, including the shadow,
- * so the state is kept consistent.
- * See ipath_restart_sdma() for the actual starting
- * of sdma.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* make sure I see next message */
- dd->ipath_sdma_abort_jiffies = 0;
-
- /*
- * Not everything that takes SDMA offline is a link
- * status change. If the link was up, restart SDMA.
- */
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- ipath_restart_sdma(dd);
-
- goto done;
- }
-
-resched:
- /*
- * for now, keep spinning
- * JAG - this is bad to just have default be a loop without
- * state change
- */
- if (time_after(jiffies, dd->ipath_sdma_abort_jiffies)) {
- ipath_dbg("looping with status 0x%08lx\n",
- dd->ipath_sdma_status);
- dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
- }
-resched_noprint:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- return;
-
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-done:
- return;
-}
-
-/*
- * This is called from interrupt context.
- */
-void ipath_sdma_intr(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- (void) ipath_sdma_make_progress(dd);
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-}
-
-static int alloc_sdma(struct ipath_devdata *dd)
-{
- int ret = 0;
-
- /* Allocate memory for SendDMA descriptor FIFO */
- dd->ipath_sdma_descq = dma_alloc_coherent(&dd->pcidev->dev,
- SDMA_DESCQ_SZ, &dd->ipath_sdma_descq_phys, GFP_KERNEL);
-
- if (!dd->ipath_sdma_descq) {
- ipath_dev_err(dd, "failed to allocate SendDMA descriptor "
- "FIFO memory\n");
- ret = -ENOMEM;
- goto done;
- }
-
- dd->ipath_sdma_descq_cnt =
- SDMA_DESCQ_SZ / sizeof(struct ipath_sdma_desc);
-
- /* Allocate memory for DMA of head register to memory */
- dd->ipath_sdma_head_dma = dma_alloc_coherent(&dd->pcidev->dev,
- PAGE_SIZE, &dd->ipath_sdma_head_phys, GFP_KERNEL);
- if (!dd->ipath_sdma_head_dma) {
- ipath_dev_err(dd, "failed to allocate SendDMA head memory\n");
- ret = -ENOMEM;
- goto cleanup_descq;
- }
- dd->ipath_sdma_head_dma[0] = 0;
-
- setup_timer(&dd->ipath_sdma_vl15_timer, vl15_watchdog_timeout,
- (unsigned long)dd);
-
- atomic_set(&dd->ipath_sdma_vl15_count, 0);
-
- goto done;
-
-cleanup_descq:
- dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
- (void *)dd->ipath_sdma_descq, dd->ipath_sdma_descq_phys);
- dd->ipath_sdma_descq = NULL;
- dd->ipath_sdma_descq_phys = 0;
-done:
- return ret;
-}
-
-int setup_sdma(struct ipath_devdata *dd)
-{
- int ret = 0;
- unsigned i, n;
- u64 tmp64;
- u64 senddmabufmask[3] = { 0 };
- unsigned long flags;
-
- ret = alloc_sdma(dd);
- if (ret)
- goto done;
-
- if (!dd->ipath_sdma_descq) {
- ipath_dev_err(dd, "SendDMA memory not allocated\n");
- goto done;
- }
-
- /*
- * Set initial status as if we had been up, then gone down.
- * This lets initial start on transition to ACTIVE be the
- * same as restart after link flap.
- */
- dd->ipath_sdma_status = IPATH_SDMA_ABORT_ABORTED;
- dd->ipath_sdma_abort_jiffies = 0;
- dd->ipath_sdma_generation = 0;
- dd->ipath_sdma_descq_tail = 0;
- dd->ipath_sdma_descq_head = 0;
- dd->ipath_sdma_descq_removed = 0;
- dd->ipath_sdma_descq_added = 0;
-
- /* Set SendDmaBase */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase,
- dd->ipath_sdma_descq_phys);
- /* Set SendDmaLenGen */
- tmp64 = dd->ipath_sdma_descq_cnt;
- tmp64 |= 1<<18; /* enable generation checking */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, tmp64);
- /* Set SendDmaTail */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail,
- dd->ipath_sdma_descq_tail);
- /* Set SendDmaHeadAddr */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
- dd->ipath_sdma_head_phys);
-
- /*
- * Reserve all the former "kernel" piobufs, using high number range
- * so we get as many 4K buffers as possible
- */
- n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved;
- ipath_chg_pioavailkernel(dd, i, n - i , 0);
- for (; i < n; ++i) {
- unsigned word = i / 64;
- unsigned bit = i & 63;
- BUG_ON(word >= 3);
- senddmabufmask[word] |= 1ULL << bit;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
- senddmabufmask[0]);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
- senddmabufmask[1]);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2,
- senddmabufmask[2]);
-
- INIT_LIST_HEAD(&dd->ipath_sdma_activelist);
- INIT_LIST_HEAD(&dd->ipath_sdma_notifylist);
-
- tasklet_init(&dd->ipath_sdma_notify_task, sdma_notify_task,
- (unsigned long) dd);
- tasklet_init(&dd->ipath_sdma_abort_task, sdma_abort_task,
- (unsigned long) dd);
-
- /*
- * No use to turn on SDMA here, as link is probably not ACTIVE
- * Just mark it RUNNING and enable the interrupt, and let the
- * ipath_restart_sdma() on link transition to ACTIVE actually
- * enable it.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_SDMAINTENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- __set_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
-done:
- return ret;
-}
-
-void teardown_sdma(struct ipath_devdata *dd)
-{
- struct ipath_sdma_txreq *txp, *txpnext;
- unsigned long flags;
- dma_addr_t sdma_head_phys = 0;
- dma_addr_t sdma_descq_phys = 0;
- void *sdma_descq = NULL;
- void *sdma_head_dma = NULL;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __clear_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
- __set_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- __set_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- tasklet_kill(&dd->ipath_sdma_abort_task);
- tasklet_kill(&dd->ipath_sdma_notify_task);
-
- /* turn off sdma */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- /* dequeue all "sent" requests */
- list_for_each_entry_safe(txp, txpnext, &dd->ipath_sdma_activelist,
- list) {
- txp->callback_status = IPATH_SDMA_TXREQ_S_SHUTDOWN;
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
- }
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- sdma_notify_taskbody(dd);
-
- del_timer_sync(&dd->ipath_sdma_vl15_timer);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- dd->ipath_sdma_abort_jiffies = 0;
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2, 0);
-
- if (dd->ipath_sdma_head_dma) {
- sdma_head_dma = (void *) dd->ipath_sdma_head_dma;
- sdma_head_phys = dd->ipath_sdma_head_phys;
- dd->ipath_sdma_head_dma = NULL;
- dd->ipath_sdma_head_phys = 0;
- }
-
- if (dd->ipath_sdma_descq) {
- sdma_descq = dd->ipath_sdma_descq;
- sdma_descq_phys = dd->ipath_sdma_descq_phys;
- dd->ipath_sdma_descq = NULL;
- dd->ipath_sdma_descq_phys = 0;
- }
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- if (sdma_head_dma)
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- sdma_head_dma, sdma_head_phys);
-
- if (sdma_descq)
- dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
- sdma_descq, sdma_descq_phys);
-}
-
-/*
- * [Re]start SDMA, if we use it, and it's not already OK.
- * This is called on transition to link ACTIVE, either the first or
- * subsequent times.
- */
-void ipath_restart_sdma(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int needed = 1;
-
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- goto bail;
-
- /*
- * First, make sure we should, which is to say,
- * check that we are "RUNNING" (not in teardown)
- * and not "SHUTDOWN"
- */
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- if (!test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)
- || test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- needed = 0;
- else {
- __clear_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- __clear_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
- __clear_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- }
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!needed) {
- ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
- dd->ipath_sdma_status);
- goto bail;
- }
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /*
- * First clear, just to be safe. Enable is only done
- * in chip on 0->1 transition
- */
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- dd->ipath_sendctrl |= INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* notify upper layers */
- ipath_ib_piobufavail(dd->verbs_dev);
-
-bail:
- return;
-}
-
-static inline void make_sdma_desc(struct ipath_devdata *dd,
- u64 *sdmadesc, u64 addr, u64 dwlen, u64 dwoffset)
-{
- WARN_ON(addr & 3);
- /* SDmaPhyAddr[47:32] */
- sdmadesc[1] = addr >> 32;
- /* SDmaPhyAddr[31:0] */
- sdmadesc[0] = (addr & 0xfffffffcULL) << 32;
- /* SDmaGeneration[1:0] */
- sdmadesc[0] |= (dd->ipath_sdma_generation & 3ULL) << 30;
- /* SDmaDwordCount[10:0] */
- sdmadesc[0] |= (dwlen & 0x7ffULL) << 16;
- /* SDmaBufOffset[12:2] */
- sdmadesc[0] |= dwoffset & 0x7ffULL;
-}
-
-/*
- * This function queues one IB packet onto the send DMA queue per call.
- * The caller is responsible for checking:
- * 1) The number of send DMA descriptor entries is less than the size of
- * the descriptor queue.
- * 2) The IB SGE addresses and lengths are 32-bit aligned
- * (except possibly the last SGE's length)
- * 3) The SGE addresses are suitable for passing to dma_map_single().
- */
-int ipath_sdma_verbs_send(struct ipath_devdata *dd,
- struct ipath_sge_state *ss, u32 dwords,
- struct ipath_verbs_txreq *tx)
-{
-
- unsigned long flags;
- struct ipath_sge *sge;
- int ret = 0;
- u16 tail;
- __le64 *descqp;
- u64 sdmadesc[2];
- u32 dwoffset;
- dma_addr_t addr;
-
- if ((tx->map_len + (dwords<<2)) > dd->ipath_ibmaxlen) {
- ipath_dbg("packet size %X > ibmax %X, fail\n",
- tx->map_len + (dwords<<2), dd->ipath_ibmaxlen);
- ret = -EMSGSIZE;
- goto fail;
- }
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
-retry:
- if (unlikely(test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status))) {
- ret = -EBUSY;
- goto unlock;
- }
-
- if (tx->txreq.sg_count > ipath_sdma_descq_freecnt(dd)) {
- if (ipath_sdma_make_progress(dd))
- goto retry;
- ret = -ENOBUFS;
- goto unlock;
- }
-
- addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
- tx->map_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, addr))
- goto ioerr;
-
- dwoffset = tx->map_len >> 2;
- make_sdma_desc(dd, sdmadesc, (u64) addr, dwoffset, 0);
-
- /* SDmaFirstDesc */
- sdmadesc[0] |= 1ULL << 12;
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
- sdmadesc[0] |= 1ULL << 14; /* SDmaUseLargeBuf */
-
- /* write to the descq */
- tail = dd->ipath_sdma_descq_tail;
- descqp = &dd->ipath_sdma_descq[tail].qw[0];
- *descqp++ = cpu_to_le64(sdmadesc[0]);
- *descqp++ = cpu_to_le64(sdmadesc[1]);
-
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEDESC)
- tx->txreq.start_idx = tail;
-
- /* increment the tail */
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- descqp = &dd->ipath_sdma_descq[0].qw[0];
- ++dd->ipath_sdma_generation;
- }
-
- sge = &ss->sge;
- while (dwords) {
- u32 dw;
- u32 len;
-
- len = dwords << 2;
- if (len > sge->length)
- len = sge->length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- dw = (len + 3) >> 2;
- addr = dma_map_single(&dd->pcidev->dev, sge->vaddr, dw << 2,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, addr))
- goto unmap;
- make_sdma_desc(dd, sdmadesc, (u64) addr, dw, dwoffset);
- /* SDmaUseLargeBuf has to be set in every descriptor */
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
- sdmadesc[0] |= 1ULL << 14;
- /* write to the descq */
- *descqp++ = cpu_to_le64(sdmadesc[0]);
- *descqp++ = cpu_to_le64(sdmadesc[1]);
-
- /* increment the tail */
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- descqp = &dd->ipath_sdma_descq[0].qw[0];
- ++dd->ipath_sdma_generation;
- }
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
-
- dwoffset += dw;
- dwords -= dw;
- }
-
- if (!tail)
- descqp = &dd->ipath_sdma_descq[dd->ipath_sdma_descq_cnt].qw[0];
- descqp -= 2;
- /* SDmaLastDesc */
- descqp[0] |= cpu_to_le64(1ULL << 11);
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_INTREQ) {
- /* SDmaIntReq */
- descqp[0] |= cpu_to_le64(1ULL << 15);
- }
-
- /* Commit writes to memory and advance the tail on the chip */
- wmb();
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
-
- tx->txreq.next_descq_idx = tail;
- tx->txreq.callback_status = IPATH_SDMA_TXREQ_S_OK;
- dd->ipath_sdma_descq_tail = tail;
- dd->ipath_sdma_descq_added += tx->txreq.sg_count;
- list_add_tail(&tx->txreq.list, &dd->ipath_sdma_activelist);
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_enq(dd);
- goto unlock;
-
-unmap:
- while (tail != dd->ipath_sdma_descq_tail) {
- if (!tail)
- tail = dd->ipath_sdma_descq_cnt - 1;
- else
- tail--;
- unmap_desc(dd, tail);
- }
-ioerr:
- ret = -EIO;
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-fail:
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_srq.c b/drivers/staging/rdma/ipath/ipath_srq.c
deleted file mode 100644
index 2627198..0000000
--- a/drivers/staging/rdma/ipath/ipath_srq.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_post_srq_receive - post a receive on a shared receive queue
- * @ibsrq: the SRQ to post the receive on
- * @wr: the list of work requests to post
- * @bad_wr: the first WR to cause a problem is put here
- *
- * This may be called from interrupt context.
- */
-int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_rwq *wq;
- unsigned long flags;
- int ret;
-
- for (; wr; wr = wr->next) {
- struct ipath_rwqe *wqe;
- u32 next;
- int i;
-
- if ((unsigned) wr->num_sge > srq->rq.max_sge) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&srq->rq.lock, flags);
- wq = srq->rq.wq;
- next = wq->head + 1;
- if (next >= srq->rq.size)
- next = 0;
- if (next == wq->tail) {
- spin_unlock_irqrestore(&srq->rq.lock, flags);
- *bad_wr = wr;
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_rwqe_ptr(&srq->rq, wq->head);
- wqe->wr_id = wr->wr_id;
- wqe->num_sge = wr->num_sge;
- for (i = 0; i < wr->num_sge; i++)
- wqe->sg_list[i] = wr->sg_list[i];
- /* Make sure queue entry is written before the head index. */
- smp_wmb();
- wq->head = next;
- spin_unlock_irqrestore(&srq->rq.lock, flags);
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_create_srq - create a shared receive queue
- * @ibpd: the protection domain of the SRQ to create
- * @srq_init_attr: the attributes of the SRQ
- * @udata: data from libipathverbs when creating a user SRQ
- */
-struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
- struct ib_srq_init_attr *srq_init_attr,
- struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibpd->device);
- struct ipath_srq *srq;
- u32 sz;
- struct ib_srq *ret;
-
- if (srq_init_attr->srq_type != IB_SRQT_BASIC) {
- ret = ERR_PTR(-ENOSYS);
- goto done;
- }
-
- if (srq_init_attr->attr.max_wr == 0) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- if ((srq_init_attr->attr.max_sge > ib_ipath_max_srq_sges) ||
- (srq_init_attr->attr.max_wr > ib_ipath_max_srq_wrs)) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- srq = kmalloc(sizeof(*srq), GFP_KERNEL);
- if (!srq) {
- ret = ERR_PTR(-ENOMEM);
- goto done;
- }
-
- /*
- * Need to use vmalloc() if we want to support large #s of entries.
- */
- srq->rq.size = srq_init_attr->attr.max_wr + 1;
- srq->rq.max_sge = srq_init_attr->attr.max_sge;
- sz = sizeof(struct ib_sge) * srq->rq.max_sge +
- sizeof(struct ipath_rwqe);
- srq->rq.wq = vmalloc_user(sizeof(struct ipath_rwq) + srq->rq.size * sz);
- if (!srq->rq.wq) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_srq;
- }
-
- /*
- * Return the address of the RWQ as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- int err;
- u32 s = sizeof(struct ipath_rwq) + srq->rq.size * sz;
-
- srq->ip =
- ipath_create_mmap_info(dev, s,
- ibpd->uobject->context,
- srq->rq.wq);
- if (!srq->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_wq;
- }
-
- err = ib_copy_to_udata(udata, &srq->ip->offset,
- sizeof(srq->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else
- srq->ip = NULL;
-
- /*
- * ib_create_srq() will initialize srq->ibsrq.
- */
- spin_lock_init(&srq->rq.lock);
- srq->rq.wq->head = 0;
- srq->rq.wq->tail = 0;
- srq->limit = srq_init_attr->attr.srq_limit;
-
- spin_lock(&dev->n_srqs_lock);
- if (dev->n_srqs_allocated == ib_ipath_max_srqs) {
- spin_unlock(&dev->n_srqs_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_srqs_allocated++;
- spin_unlock(&dev->n_srqs_lock);
-
- if (srq->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&srq->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = &srq->ibsrq;
- goto done;
-
-bail_ip:
- kfree(srq->ip);
-bail_wq:
- vfree(srq->rq.wq);
-bail_srq:
- kfree(srq);
-done:
- return ret;
-}
-
-/**
- * ipath_modify_srq - modify a shared receive queue
- * @ibsrq: the SRQ to modify
- * @attr: the new attributes of the SRQ
- * @attr_mask: indicates which attributes to modify
- * @udata: user data for ipathverbs.so
- */
-int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
- enum ib_srq_attr_mask attr_mask,
- struct ib_udata *udata)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_rwq *wq;
- int ret = 0;
-
- if (attr_mask & IB_SRQ_MAX_WR) {
- struct ipath_rwq *owq;
- struct ipath_rwqe *p;
- u32 sz, size, n, head, tail;
-
- /* Check that the requested sizes are below the limits. */
- if ((attr->max_wr > ib_ipath_max_srq_wrs) ||
- ((attr_mask & IB_SRQ_LIMIT) ?
- attr->srq_limit : srq->limit) > attr->max_wr) {
- ret = -EINVAL;
- goto bail;
- }
-
- sz = sizeof(struct ipath_rwqe) +
- srq->rq.max_sge * sizeof(struct ib_sge);
- size = attr->max_wr + 1;
- wq = vmalloc_user(sizeof(struct ipath_rwq) + size * sz);
- if (!wq) {
- ret = -ENOMEM;
- goto bail;
- }
-
- /* Check that we can write the offset to mmap. */
- if (udata && udata->inlen >= sizeof(__u64)) {
- __u64 offset_addr;
- __u64 offset = 0;
-
- ret = ib_copy_from_udata(&offset_addr, udata,
- sizeof(offset_addr));
- if (ret)
- goto bail_free;
- udata->outbuf =
- (void __user *) (unsigned long) offset_addr;
- ret = ib_copy_to_udata(udata, &offset,
- sizeof(offset));
- if (ret)
- goto bail_free;
- }
-
- spin_lock_irq(&srq->rq.lock);
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- owq = srq->rq.wq;
- head = owq->head;
- if (head >= srq->rq.size)
- head = 0;
- tail = owq->tail;
- if (tail >= srq->rq.size)
- tail = 0;
- n = head;
- if (n < tail)
- n += srq->rq.size - tail;
- else
- n -= tail;
- if (size <= n) {
- ret = -EINVAL;
- goto bail_unlock;
- }
- n = 0;
- p = wq->wq;
- while (tail != head) {
- struct ipath_rwqe *wqe;
- int i;
-
- wqe = get_rwqe_ptr(&srq->rq, tail);
- p->wr_id = wqe->wr_id;
- p->num_sge = wqe->num_sge;
- for (i = 0; i < wqe->num_sge; i++)
- p->sg_list[i] = wqe->sg_list[i];
- n++;
- p = (struct ipath_rwqe *)((char *) p + sz);
- if (++tail >= srq->rq.size)
- tail = 0;
- }
- srq->rq.wq = wq;
- srq->rq.size = size;
- wq->head = n;
- wq->tail = 0;
- if (attr_mask & IB_SRQ_LIMIT)
- srq->limit = attr->srq_limit;
- spin_unlock_irq(&srq->rq.lock);
-
- vfree(owq);
-
- if (srq->ip) {
- struct ipath_mmap_info *ip = srq->ip;
- struct ipath_ibdev *dev = to_idev(srq->ibsrq.device);
- u32 s = sizeof(struct ipath_rwq) + size * sz;
-
- ipath_update_mmap_info(dev, ip, s, wq);
-
- /*
- * Return the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->inlen >= sizeof(__u64)) {
- ret = ib_copy_to_udata(udata, &ip->offset,
- sizeof(ip->offset));
- if (ret)
- goto bail;
- }
-
- spin_lock_irq(&dev->pending_lock);
- if (list_empty(&ip->pending_mmaps))
- list_add(&ip->pending_mmaps,
- &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
- } else if (attr_mask & IB_SRQ_LIMIT) {
- spin_lock_irq(&srq->rq.lock);
- if (attr->srq_limit >= srq->rq.size)
- ret = -EINVAL;
- else
- srq->limit = attr->srq_limit;
- spin_unlock_irq(&srq->rq.lock);
- }
- goto bail;
-
-bail_unlock:
- spin_unlock_irq(&srq->rq.lock);
-bail_free:
- vfree(wq);
-bail:
- return ret;
-}
-
-int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
-
- attr->max_wr = srq->rq.size - 1;
- attr->max_sge = srq->rq.max_sge;
- attr->srq_limit = srq->limit;
- return 0;
-}
-
-/**
- * ipath_destroy_srq - destroy a shared receive queue
- * @ibsrq: the SRQ to destroy
- */
-int ipath_destroy_srq(struct ib_srq *ibsrq)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_ibdev *dev = to_idev(ibsrq->device);
-
- spin_lock(&dev->n_srqs_lock);
- dev->n_srqs_allocated--;
- spin_unlock(&dev->n_srqs_lock);
- if (srq->ip)
- kref_put(&srq->ip->ref, ipath_release_mmap_info);
- else
- vfree(srq->rq.wq);
- kfree(srq);
-
- return 0;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_stats.c b/drivers/staging/rdma/ipath/ipath_stats.c
deleted file mode 100644
index f63e143..0000000
--- a/drivers/staging/rdma/ipath/ipath_stats.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "ipath_kernel.h"
-
-struct infinipath_stats ipath_stats;
-
-/**
- * ipath_snap_cntr - snapshot a chip counter
- * @dd: the infinipath device
- * @creg: the counter to snapshot
- *
- * called from add_timer and user counter read calls, to deal with
- * counters that wrap in "human time". The words sent and received, and
- * the packets sent and received are all that we worry about. For now,
- * at least, we don't worry about error counters, because if they wrap
- * that quickly, we probably don't care. We may eventually just make this
- * handle all the counters. word counters can wrap in about 20 seconds
- * of full bandwidth traffic, packet counters in a few hours.
- */
-
-u64 ipath_snap_cntr(struct ipath_devdata *dd, ipath_creg creg)
-{
- u32 val, reg64 = 0;
- u64 val64;
- unsigned long t0, t1;
- u64 ret;
-
- t0 = jiffies;
- /* If fast increment counters are only 32 bits, snapshot them,
- * and maintain them as 64bit values in the driver */
- if (!(dd->ipath_flags & IPATH_32BITCOUNTERS) &&
- (creg == dd->ipath_cregs->cr_wordsendcnt ||
- creg == dd->ipath_cregs->cr_wordrcvcnt ||
- creg == dd->ipath_cregs->cr_pktsendcnt ||
- creg == dd->ipath_cregs->cr_pktrcvcnt)) {
- val64 = ipath_read_creg(dd, creg);
- val = val64 == ~0ULL ? ~0U : 0;
- reg64 = 1;
- } else /* val64 just to keep gcc quiet... */
- val64 = val = ipath_read_creg32(dd, creg);
- /*
- * See if a second has passed. This is just a way to detect things
- * that are quite broken. Normally this should take just a few
- * cycles (the check is for long enough that we don't care if we get
- * pre-empted.) An Opteron HT O read timeout is 4 seconds with
- * normal NB values
- */
- t1 = jiffies;
- if (time_before(t0 + HZ, t1) && val == -1) {
- ipath_dev_err(dd, "Error! Read counter 0x%x timed out\n",
- creg);
- ret = 0ULL;
- goto bail;
- }
- if (reg64) {
- ret = val64;
- goto bail;
- }
-
- if (creg == dd->ipath_cregs->cr_wordsendcnt) {
- if (val != dd->ipath_lastsword) {
- dd->ipath_sword += val - dd->ipath_lastsword;
- dd->ipath_lastsword = val;
- }
- val64 = dd->ipath_sword;
- } else if (creg == dd->ipath_cregs->cr_wordrcvcnt) {
- if (val != dd->ipath_lastrword) {
- dd->ipath_rword += val - dd->ipath_lastrword;
- dd->ipath_lastrword = val;
- }
- val64 = dd->ipath_rword;
- } else if (creg == dd->ipath_cregs->cr_pktsendcnt) {
- if (val != dd->ipath_lastspkts) {
- dd->ipath_spkts += val - dd->ipath_lastspkts;
- dd->ipath_lastspkts = val;
- }
- val64 = dd->ipath_spkts;
- } else if (creg == dd->ipath_cregs->cr_pktrcvcnt) {
- if (val != dd->ipath_lastrpkts) {
- dd->ipath_rpkts += val - dd->ipath_lastrpkts;
- dd->ipath_lastrpkts = val;
- }
- val64 = dd->ipath_rpkts;
- } else if (creg == dd->ipath_cregs->cr_ibsymbolerrcnt) {
- if (dd->ibdeltainprog)
- val64 -= val64 - dd->ibsymsnap;
- val64 -= dd->ibsymdelta;
- } else if (creg == dd->ipath_cregs->cr_iblinkerrrecovcnt) {
- if (dd->ibdeltainprog)
- val64 -= val64 - dd->iblnkerrsnap;
- val64 -= dd->iblnkerrdelta;
- } else
- val64 = (u64) val;
-
- ret = val64;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_qcheck - print delta of egrfull/hdrqfull errors for kernel ports
- * @dd: the infinipath device
- *
- * print the delta of egrfull/hdrqfull errors for kernel ports no more than
- * every 5 seconds. User processes are printed at close, but kernel doesn't
- * close, so... Separate routine so may call from other places someday, and
- * so function name when printed by _IPATH_INFO is meaningfull
- */
-static void ipath_qcheck(struct ipath_devdata *dd)
-{
- static u64 last_tot_hdrqfull;
- struct ipath_portdata *pd = dd->ipath_pd[0];
- size_t blen = 0;
- char buf[128];
- u32 hdrqtail;
-
- *buf = 0;
- if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) {
- blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
- pd->port_hdrqfull -
- dd->ipath_p0_hdrqfull);
- dd->ipath_p0_hdrqfull = pd->port_hdrqfull;
- }
- if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
- blen += snprintf(buf + blen, sizeof buf - blen,
- "%srcvegrfull %llu",
- blen ? ", " : "",
- (unsigned long long)
- (ipath_stats.sps_etidfull -
- dd->ipath_last_tidfull));
- dd->ipath_last_tidfull = ipath_stats.sps_etidfull;
- }
-
- /*
- * this is actually the number of hdrq full interrupts, not actual
- * events, but at the moment that's mostly what I'm interested in.
- * Actual count, etc. is in the counters, if needed. For production
- * users this won't ordinarily be printed.
- */
-
- if ((ipath_debug & (__IPATH_PKTDBG | __IPATH_DBG)) &&
- ipath_stats.sps_hdrqfull != last_tot_hdrqfull) {
- blen += snprintf(buf + blen, sizeof buf - blen,
- "%shdrqfull %llu (all ports)",
- blen ? ", " : "",
- (unsigned long long)
- (ipath_stats.sps_hdrqfull -
- last_tot_hdrqfull));
- last_tot_hdrqfull = ipath_stats.sps_hdrqfull;
- }
- if (blen)
- ipath_dbg("%s\n", buf);
-
- hdrqtail = ipath_get_hdrqtail(pd);
- if (pd->port_head != hdrqtail) {
- if (dd->ipath_lastport0rcv_cnt ==
- ipath_stats.sps_port0pkts) {
- ipath_cdbg(PKT, "missing rcv interrupts? "
- "port0 hd=%x tl=%x; port0pkts %llx; write"
- " hd (w/intr)\n",
- pd->port_head, hdrqtail,
- (unsigned long long)
- ipath_stats.sps_port0pkts);
- ipath_write_ureg(dd, ur_rcvhdrhead, hdrqtail |
- dd->ipath_rhdrhead_intr_off, pd->port_port);
- }
- dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
- }
-}
-
-static void ipath_chk_errormask(struct ipath_devdata *dd)
-{
- static u32 fixed;
- u32 ctrl;
- unsigned long errormask;
- unsigned long hwerrs;
-
- if (!dd->ipath_errormask || !(dd->ipath_flags & IPATH_INITTED))
- return;
-
- errormask = ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
-
- if (errormask == dd->ipath_errormask)
- return;
- fixed++;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-
- if ((hwerrs & dd->ipath_hwerrmask) ||
- (ctrl & INFINIPATH_C_FREEZEMODE)) {
- /* force re-interrupt of pending events, just in case */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
- dev_info(&dd->pcidev->dev,
- "errormask fixed(%u) %lx -> %lx, ctrl %x hwerr %lx\n",
- fixed, errormask, (unsigned long)dd->ipath_errormask,
- ctrl, hwerrs);
- } else
- ipath_dbg("errormask fixed(%u) %lx -> %lx, no freeze\n",
- fixed, errormask,
- (unsigned long)dd->ipath_errormask);
-}
-
-
-/**
- * ipath_get_faststats - get word counters from chip before they overflow
- * @opaque - contains a pointer to the infinipath device ipath_devdata
- *
- * called from add_timer
- */
-void ipath_get_faststats(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
- int i;
- static unsigned cnt;
- unsigned long flags;
- u64 traffic_wds;
-
- /*
- * don't access the chip while running diags, or memory diags can
- * fail
- */
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_INITTED) ||
- ipath_diag_inuse)
- /* but re-arm the timer, for diags case; won't hurt other */
- goto done;
-
- /*
- * We now try to maintain a "active timer", based on traffic
- * exceeding a threshold, so we need to check the word-counts
- * even if they are 64-bit.
- */
- traffic_wds = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt) +
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- traffic_wds -= dd->ipath_traffic_wds;
- dd->ipath_traffic_wds += traffic_wds;
- if (traffic_wds >= IPATH_TRAFFIC_ACTIVE_THRESHOLD)
- atomic_add(5, &dd->ipath_active_time); /* S/B #define */
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
-
- if (dd->ipath_flags & IPATH_32BITCOUNTERS) {
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
- }
-
- ipath_qcheck(dd);
-
- /*
- * deal with repeat error suppression. Doesn't really matter if
- * last error was almost a full interval ago, or just a few usecs
- * ago; still won't get more than 2 per interval. We may want
- * longer intervals for this eventually, could do with mod, counter
- * or separate timer. Also see code in ipath_handle_errors() and
- * ipath_handle_hwerrors().
- */
-
- if (dd->ipath_lasterror)
- dd->ipath_lasterror = 0;
- if (dd->ipath_lasthwerror)
- dd->ipath_lasthwerror = 0;
- if (dd->ipath_maskederrs
- && time_after(jiffies, dd->ipath_unmasktime)) {
- char ebuf[256];
- int iserr;
- iserr = ipath_decode_err(dd, ebuf, sizeof ebuf,
- dd->ipath_maskederrs);
- if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_PKTERRS))
- ipath_dev_err(dd, "Re-enabling masked errors "
- "(%s)\n", ebuf);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal", for some
- * types of processes (mostly benchmarks) that send
- * huge numbers of messages, while not processing
- * them. So only complain about these at debug
- * level.
- */
- if (iserr)
- ipath_dbg(
- "Re-enabling queue full errors (%s)\n",
- ebuf);
- else
- ipath_cdbg(ERRPKT, "Re-enabling packet"
- " problem interrupt (%s)\n", ebuf);
- }
-
- /* re-enable masked errors */
- dd->ipath_errormask |= dd->ipath_maskederrs;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- dd->ipath_maskederrs = 0;
- }
-
- /* limit qfull messages to ~one per minute per port */
- if ((++cnt & 0x10)) {
- for (i = (int) dd->ipath_cfgports; --i >= 0; ) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (pd && pd->port_lastrcvhdrqtail != -1)
- pd->port_lastrcvhdrqtail = -1;
- }
- }
-
- ipath_chk_errormask(dd);
-done:
- mod_timer(&dd->ipath_stats_timer, jiffies + HZ * 5);
-}
diff --git a/drivers/staging/rdma/ipath/ipath_sysfs.c b/drivers/staging/rdma/ipath/ipath_sysfs.c
deleted file mode 100644
index b12b1f6..0000000
--- a/drivers/staging/rdma/ipath/ipath_sysfs.c
+++ /dev/null
@@ -1,1237 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/ctype.h>
-#include <linux/stat.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-/**
- * ipath_parse_ushort - parse an unsigned short value in an arbitrary base
- * @str: the string containing the number
- * @valp: where to put the result
- *
- * returns the number of bytes consumed, or negative value on error
- */
-int ipath_parse_ushort(const char *str, unsigned short *valp)
-{
- unsigned long val;
- char *end;
- int ret;
-
- if (!isdigit(str[0])) {
- ret = -EINVAL;
- goto bail;
- }
-
- val = simple_strtoul(str, &end, 0);
-
- if (val > 0xffff) {
- ret = -EINVAL;
- goto bail;
- }
-
- *valp = val;
-
- ret = end + 1 - str;
- if (ret == 0)
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-static ssize_t show_version(struct device_driver *dev, char *buf)
-{
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", ib_ipath_version);
-}
-
-static ssize_t show_num_units(struct device_driver *dev, char *buf)
-{
- return scnprintf(buf, PAGE_SIZE, "%d\n",
- ipath_count_units(NULL, NULL, NULL));
-}
-
-static ssize_t show_status(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
-
- if (!dd->ipath_statusp) {
- ret = -EINVAL;
- goto bail;
- }
-
- ret = scnprintf(buf, PAGE_SIZE, "0x%llx\n",
- (unsigned long long) *(dd->ipath_statusp));
-
-bail:
- return ret;
-}
-
-static const char *ipath_status_str[] = {
- "Initted",
- "Disabled",
- "Admin_Disabled",
- "", /* This used to be the old "OIB_SMA" status. */
- "", /* This used to be the old "SMA" status. */
- "Present",
- "IB_link_up",
- "IB_configured",
- "NoIBcable",
- "Fatal_Hardware_Error",
- NULL,
-};
-
-static ssize_t show_status_str(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int i, any;
- u64 s;
- ssize_t ret;
-
- if (!dd->ipath_statusp) {
- ret = -EINVAL;
- goto bail;
- }
-
- s = *(dd->ipath_statusp);
- *buf = '\0';
- for (any = i = 0; s && ipath_status_str[i]; i++) {
- if (s & 1) {
- if (any && strlcat(buf, " ", PAGE_SIZE) >=
- PAGE_SIZE)
- /* overflow */
- break;
- if (strlcat(buf, ipath_status_str[i],
- PAGE_SIZE) >= PAGE_SIZE)
- break;
- any = 1;
- }
- s >>= 1;
- }
- if (any)
- strlcat(buf, "\n", PAGE_SIZE);
-
- ret = strlen(buf);
-
-bail:
- return ret;
-}
-
-static ssize_t show_boardversion(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_boardversion);
-}
-
-static ssize_t show_localbus_info(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_lbus_info);
-}
-
-static ssize_t show_lmc(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_lmc);
-}
-
-static ssize_t store_lmc(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 lmc = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &lmc);
- if (ret < 0)
- goto invalid;
-
- if (lmc > 7) {
- ret = -EINVAL;
- goto invalid;
- }
-
- ipath_set_lid(dd, dd->ipath_lid, lmc);
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid LMC %u\n", lmc);
-bail:
- return ret;
-}
-
-static ssize_t show_lid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_lid);
-}
-
-static ssize_t store_lid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 lid = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &lid);
- if (ret < 0)
- goto invalid;
-
- if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE) {
- ret = -EINVAL;
- goto invalid;
- }
-
- ipath_set_lid(dd, lid, dd->ipath_lmc);
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid LID 0x%x\n", lid);
-bail:
- return ret;
-}
-
-static ssize_t show_mlid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_mlid);
-}
-
-static ssize_t store_mlid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 mlid;
- int ret;
-
- ret = ipath_parse_ushort(buf, &mlid);
- if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
- goto invalid;
-
- dd->ipath_mlid = mlid;
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid MLID\n");
-bail:
- return ret;
-}
-
-static ssize_t show_guid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u8 *guid;
-
- guid = (u8 *) & (dd->ipath_guid);
-
- return scnprintf(buf, PAGE_SIZE,
- "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
- guid[0], guid[1], guid[2], guid[3],
- guid[4], guid[5], guid[6], guid[7]);
-}
-
-static ssize_t store_guid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- unsigned short guid[8];
- __be64 new_guid;
- u8 *ng;
- int i;
-
- if (sscanf(buf, "%hx:%hx:%hx:%hx:%hx:%hx:%hx:%hx",
- &guid[0], &guid[1], &guid[2], &guid[3],
- &guid[4], &guid[5], &guid[6], &guid[7]) != 8)
- goto invalid;
-
- ng = (u8 *) &new_guid;
-
- for (i = 0; i < 8; i++) {
- if (guid[i] > 0xff)
- goto invalid;
- ng[i] = guid[i];
- }
-
- if (new_guid == 0)
- goto invalid;
-
- dd->ipath_guid = new_guid;
- dd->ipath_nguid = 1;
- if (dd->verbs_dev)
- dd->verbs_dev->ibdev.node_guid = new_guid;
-
- ret = strlen(buf);
- goto bail;
-
-invalid:
- ipath_dev_err(dd, "attempt to set invalid GUID\n");
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-static ssize_t show_nguid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_nguid);
-}
-
-static ssize_t show_nports(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- /* Return the number of user ports available. */
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_cfgports - 1);
-}
-
-static ssize_t show_serial(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- buf[sizeof dd->ipath_serial] = '\0';
- memcpy(buf, dd->ipath_serial, sizeof dd->ipath_serial);
- strcat(buf, "\n");
- return strlen(buf);
-}
-
-static ssize_t show_unit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_unit);
-}
-
-static ssize_t show_jint_max_packets(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_max_packets);
-}
-
-static ssize_t store_jint_max_packets(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 v = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &v);
- if (ret < 0)
- ipath_dev_err(dd, "invalid jint_max_packets.\n");
- else
- dd->ipath_f_config_jint(dd, dd->ipath_jint_idle_ticks, v);
-
- return ret;
-}
-
-static ssize_t show_jint_idle_ticks(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_idle_ticks);
-}
-
-static ssize_t store_jint_idle_ticks(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 v = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &v);
- if (ret < 0)
- ipath_dev_err(dd, "invalid jint_idle_ticks.\n");
- else
- dd->ipath_f_config_jint(dd, v, dd->ipath_jint_max_packets);
-
- return ret;
-}
-
-#define DEVICE_COUNTER(name, attr) \
- static ssize_t show_counter_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
- { \
- struct ipath_devdata *dd = dev_get_drvdata(dev); \
- return scnprintf(\
- buf, PAGE_SIZE, "%llu\n", (unsigned long long) \
- ipath_snap_cntr( \
- dd, offsetof(struct infinipath_counters, \
- attr) / sizeof(u64))); \
- } \
- static DEVICE_ATTR(name, S_IRUGO, show_counter_##name, NULL);
-
-DEVICE_COUNTER(ib_link_downeds, IBLinkDownedCnt);
-DEVICE_COUNTER(ib_link_err_recoveries, IBLinkErrRecoveryCnt);
-DEVICE_COUNTER(ib_status_changes, IBStatusChangeCnt);
-DEVICE_COUNTER(ib_symbol_errs, IBSymbolErrCnt);
-DEVICE_COUNTER(lb_flow_stalls, LBFlowStallCnt);
-DEVICE_COUNTER(lb_ints, LBIntCnt);
-DEVICE_COUNTER(rx_bad_formats, RxBadFormatCnt);
-DEVICE_COUNTER(rx_buf_ovfls, RxBufOvflCnt);
-DEVICE_COUNTER(rx_data_pkts, RxDataPktCnt);
-DEVICE_COUNTER(rx_dropped_pkts, RxDroppedPktCnt);
-DEVICE_COUNTER(rx_dwords, RxDwordCnt);
-DEVICE_COUNTER(rx_ebps, RxEBPCnt);
-DEVICE_COUNTER(rx_flow_ctrl_errs, RxFlowCtrlErrCnt);
-DEVICE_COUNTER(rx_flow_pkts, RxFlowPktCnt);
-DEVICE_COUNTER(rx_icrc_errs, RxICRCErrCnt);
-DEVICE_COUNTER(rx_len_errs, RxLenErrCnt);
-DEVICE_COUNTER(rx_link_problems, RxLinkProblemCnt);
-DEVICE_COUNTER(rx_lpcrc_errs, RxLPCRCErrCnt);
-DEVICE_COUNTER(rx_max_min_len_errs, RxMaxMinLenErrCnt);
-DEVICE_COUNTER(rx_p0_hdr_egr_ovfls, RxP0HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p1_hdr_egr_ovfls, RxP1HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p2_hdr_egr_ovfls, RxP2HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p3_hdr_egr_ovfls, RxP3HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p4_hdr_egr_ovfls, RxP4HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p5_hdr_egr_ovfls, RxP5HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p6_hdr_egr_ovfls, RxP6HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p7_hdr_egr_ovfls, RxP7HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p8_hdr_egr_ovfls, RxP8HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_pkey_mismatches, RxPKeyMismatchCnt);
-DEVICE_COUNTER(rx_tid_full_errs, RxTIDFullErrCnt);
-DEVICE_COUNTER(rx_tid_valid_errs, RxTIDValidErrCnt);
-DEVICE_COUNTER(rx_vcrc_errs, RxVCRCErrCnt);
-DEVICE_COUNTER(tx_data_pkts, TxDataPktCnt);
-DEVICE_COUNTER(tx_dropped_pkts, TxDroppedPktCnt);
-DEVICE_COUNTER(tx_dwords, TxDwordCnt);
-DEVICE_COUNTER(tx_flow_pkts, TxFlowPktCnt);
-DEVICE_COUNTER(tx_flow_stalls, TxFlowStallCnt);
-DEVICE_COUNTER(tx_len_errs, TxLenErrCnt);
-DEVICE_COUNTER(tx_max_min_len_errs, TxMaxMinLenErrCnt);
-DEVICE_COUNTER(tx_underruns, TxUnderrunCnt);
-DEVICE_COUNTER(tx_unsup_vl_errs, TxUnsupVLErrCnt);
-
-static struct attribute *dev_counter_attributes[] = {
- &dev_attr_ib_link_downeds.attr,
- &dev_attr_ib_link_err_recoveries.attr,
- &dev_attr_ib_status_changes.attr,
- &dev_attr_ib_symbol_errs.attr,
- &dev_attr_lb_flow_stalls.attr,
- &dev_attr_lb_ints.attr,
- &dev_attr_rx_bad_formats.attr,
- &dev_attr_rx_buf_ovfls.attr,
- &dev_attr_rx_data_pkts.attr,
- &dev_attr_rx_dropped_pkts.attr,
- &dev_attr_rx_dwords.attr,
- &dev_attr_rx_ebps.attr,
- &dev_attr_rx_flow_ctrl_errs.attr,
- &dev_attr_rx_flow_pkts.attr,
- &dev_attr_rx_icrc_errs.attr,
- &dev_attr_rx_len_errs.attr,
- &dev_attr_rx_link_problems.attr,
- &dev_attr_rx_lpcrc_errs.attr,
- &dev_attr_rx_max_min_len_errs.attr,
- &dev_attr_rx_p0_hdr_egr_ovfls.attr,
- &dev_attr_rx_p1_hdr_egr_ovfls.attr,
- &dev_attr_rx_p2_hdr_egr_ovfls.attr,
- &dev_attr_rx_p3_hdr_egr_ovfls.attr,
- &dev_attr_rx_p4_hdr_egr_ovfls.attr,
- &dev_attr_rx_p5_hdr_egr_ovfls.attr,
- &dev_attr_rx_p6_hdr_egr_ovfls.attr,
- &dev_attr_rx_p7_hdr_egr_ovfls.attr,
- &dev_attr_rx_p8_hdr_egr_ovfls.attr,
- &dev_attr_rx_pkey_mismatches.attr,
- &dev_attr_rx_tid_full_errs.attr,
- &dev_attr_rx_tid_valid_errs.attr,
- &dev_attr_rx_vcrc_errs.attr,
- &dev_attr_tx_data_pkts.attr,
- &dev_attr_tx_dropped_pkts.attr,
- &dev_attr_tx_dwords.attr,
- &dev_attr_tx_flow_pkts.attr,
- &dev_attr_tx_flow_stalls.attr,
- &dev_attr_tx_len_errs.attr,
- &dev_attr_tx_max_min_len_errs.attr,
- &dev_attr_tx_underruns.attr,
- &dev_attr_tx_unsup_vl_errs.attr,
- NULL
-};
-
-static struct attribute_group dev_counter_attr_group = {
- .name = "counters",
- .attrs = dev_counter_attributes
-};
-
-static ssize_t store_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- if (count < 5 || memcmp(buf, "reset", 5)) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (dd->ipath_flags & IPATH_DISABLED) {
- /*
- * post-reset init would re-enable interrupts, etc.
- * so don't allow reset on disabled devices. Not
- * perfect error, but about the best choice.
- */
- dev_info(dev,"Unit %d is disabled, can't reset\n",
- dd->ipath_unit);
- ret = -EINVAL;
- goto bail;
- }
- ret = ipath_reset_device(dd->ipath_unit);
-bail:
- return ret<0 ? ret : count;
-}
-
-static ssize_t store_link_state(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 state;
-
- ret = ipath_parse_ushort(buf, &state);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_linkstate(dd, state);
- if (r < 0) {
- ret = r;
- goto bail;
- }
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid link state\n");
-bail:
- return ret;
-}
-
-static ssize_t show_mtu(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_ibmtu);
-}
-
-static ssize_t store_mtu(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- u16 mtu = 0;
- int r;
-
- ret = ipath_parse_ushort(buf, &mtu);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_mtu(dd, mtu);
- if (r < 0)
- ret = r;
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid MTU\n");
-bail:
- return ret;
-}
-
-static ssize_t show_enabled(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n",
- (dd->ipath_flags & IPATH_DISABLED) ? 0 : 1);
-}
-
-static ssize_t store_enabled(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- u16 enable = 0;
-
- ret = ipath_parse_ushort(buf, &enable);
- if (ret < 0) {
- ipath_dev_err(dd, "attempt to use non-numeric on enable\n");
- goto bail;
- }
-
- if (enable) {
- if (!(dd->ipath_flags & IPATH_DISABLED))
- goto bail;
-
- dev_info(dev, "Enabling unit %d\n", dd->ipath_unit);
- /* same as post-reset */
- ret = ipath_init_chip(dd, 1);
- if (ret)
- ipath_dev_err(dd, "Failed to enable unit %d\n",
- dd->ipath_unit);
- else {
- dd->ipath_flags &= ~IPATH_DISABLED;
- *dd->ipath_statusp &= ~IPATH_STATUS_ADMIN_DISABLED;
- }
- } else if (!(dd->ipath_flags & IPATH_DISABLED)) {
- dev_info(dev, "Disabling unit %d\n", dd->ipath_unit);
- ipath_shutdown_device(dd);
- dd->ipath_flags |= IPATH_DISABLED;
- *dd->ipath_statusp |= IPATH_STATUS_ADMIN_DISABLED;
- }
-
-bail:
- return ret;
-}
-
-static ssize_t store_rx_pol_inv(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_rx_pol_inv(dd, val);
- if (r < 0) {
- ret = r;
- goto bail;
- }
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid Rx Polarity invert\n");
-bail:
- return ret;
-}
-
-static ssize_t store_led_override(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret > 0)
- ipath_set_led_override(dd, val);
- else
- ipath_dev_err(dd, "attempt to set invalid LED override\n");
- return ret;
-}
-
-static ssize_t show_logged_errs(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int idx, count;
-
- /* force consistency with actual EEPROM */
- if (ipath_update_eeprom_log(dd) != 0)
- return -ENXIO;
-
- count = 0;
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- count += scnprintf(buf + count, PAGE_SIZE - count, "%d%c",
- dd->ipath_eep_st_errs[idx],
- idx == (IPATH_EEP_LOG_CNT - 1) ? '\n' : ' ');
- }
-
- return count;
-}
-
-/*
- * New sysfs entries to control various IB config. These all turn into
- * accesses via ipath_f_get/set_ib_cfg.
- *
- * Get/Set heartbeat enable. Or of 1=enabled, 2=auto
- */
-static ssize_t show_hrtbt_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_HRTBT);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_hrtbt_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 3)
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd, "attempt to set invalid Heartbeat enable\n");
- goto bail;
- }
-
- /*
- * Set the "intentional" heartbeat enable per either of
- * "Enable" and "Auto", as these are normally set together.
- * This bit is consulted when leaving loopback mode,
- * because entering loopback mode overrides it and automatically
- * disables heartbeat.
- */
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, val);
- if (r < 0)
- ret = r;
- else if (val == IPATH_IB_HRTBT_OFF)
- dd->ipath_flags |= IPATH_NO_HRTBT;
- else
- dd->ipath_flags &= ~IPATH_NO_HRTBT;
-
-bail:
- return ret;
-}
-
-/*
- * Get/Set Link-widths enabled. Or of 1=1x, 2=4x (this is human/IB centric,
- * _not_ the particular encoding of any given chip)
- */
-static ssize_t show_lwid_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_lwid_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && (val == 0 || val > 3))
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd,
- "attempt to set invalid Link Width (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/* Get current link width */
-static ssize_t show_lwid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-/*
- * Get/Set Link-speeds enabled. Or of 1=SDR 2=DDR.
- */
-static ssize_t show_spd_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_spd_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && (val == 0 || val > (IPATH_IB_SDR | IPATH_IB_DDR)))
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd,
- "attempt to set invalid Link Speed (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/* Get current link speed */
-static ssize_t show_spd(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-/*
- * Get/Set RX polarity-invert enable. 0=no, 1=yes.
- */
-static ssize_t show_rx_polinv_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_rx_polinv_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 1) {
- ipath_dev_err(dd,
- "attempt to set invalid Rx Polarity (enable)\n");
- ret = -EINVAL;
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/*
- * Get/Set RX lane-reversal enable. 0=no, 1=yes.
- */
-static ssize_t show_lanerev_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_lanerev_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 1) {
- ret = -EINVAL;
- ipath_dev_err(dd,
- "attempt to set invalid Lane reversal (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-static DRIVER_ATTR(num_units, S_IRUGO, show_num_units, NULL);
-static DRIVER_ATTR(version, S_IRUGO, show_version, NULL);
-
-static struct attribute *driver_attributes[] = {
- &driver_attr_num_units.attr,
- &driver_attr_version.attr,
- NULL
-};
-
-static struct attribute_group driver_attr_group = {
- .attrs = driver_attributes
-};
-
-static ssize_t store_tempsense(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, stat;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret <= 0) {
- ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
- goto bail;
- }
- /* If anything but the highest limit, enable T_CRIT_A "interrupt" */
- stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
- if (stat) {
- ipath_dev_err(dd, "Unable to set tempsense config\n");
- ret = -1;
- goto bail;
- }
- stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
- if (stat) {
- ipath_dev_err(dd, "Unable to set local Tcrit\n");
- ret = -1;
- goto bail;
- }
- stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
- if (stat) {
- ipath_dev_err(dd, "Unable to set remote Tcrit\n");
- ret = -1;
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-/*
- * dump tempsense regs. in decimal, to ease shell-scripts.
- */
-static ssize_t show_tempsense(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
- int idx;
- u8 regvals[8];
-
- ret = -ENXIO;
- for (idx = 0; idx < 8; ++idx) {
- if (idx == 6)
- continue;
- ret = ipath_tempsense_read(dd, idx);
- if (ret < 0)
- break;
- regvals[idx] = ret;
- }
- if (idx == 8)
- ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
- *(signed char *)(regvals),
- *(signed char *)(regvals + 1),
- regvals[2], regvals[3],
- *(signed char *)(regvals + 5),
- *(signed char *)(regvals + 7));
- return ret;
-}
-
-const struct attribute_group *ipath_driver_attr_groups[] = {
- &driver_attr_group,
- NULL,
-};
-
-static DEVICE_ATTR(guid, S_IWUSR | S_IRUGO, show_guid, store_guid);
-static DEVICE_ATTR(lmc, S_IWUSR | S_IRUGO, show_lmc, store_lmc);
-static DEVICE_ATTR(lid, S_IWUSR | S_IRUGO, show_lid, store_lid);
-static DEVICE_ATTR(link_state, S_IWUSR, NULL, store_link_state);
-static DEVICE_ATTR(mlid, S_IWUSR | S_IRUGO, show_mlid, store_mlid);
-static DEVICE_ATTR(mtu, S_IWUSR | S_IRUGO, show_mtu, store_mtu);
-static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO, show_enabled, store_enabled);
-static DEVICE_ATTR(nguid, S_IRUGO, show_nguid, NULL);
-static DEVICE_ATTR(nports, S_IRUGO, show_nports, NULL);
-static DEVICE_ATTR(reset, S_IWUSR, NULL, store_reset);
-static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-static DEVICE_ATTR(status_str, S_IRUGO, show_status_str, NULL);
-static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL);
-static DEVICE_ATTR(unit, S_IRUGO, show_unit, NULL);
-static DEVICE_ATTR(rx_pol_inv, S_IWUSR, NULL, store_rx_pol_inv);
-static DEVICE_ATTR(led_override, S_IWUSR, NULL, store_led_override);
-static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
-static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
-static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
- show_jint_max_packets, store_jint_max_packets);
-static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
- show_jint_idle_ticks, store_jint_idle_ticks);
-static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
- show_tempsense, store_tempsense);
-
-static struct attribute *dev_attributes[] = {
- &dev_attr_guid.attr,
- &dev_attr_lmc.attr,
- &dev_attr_lid.attr,
- &dev_attr_link_state.attr,
- &dev_attr_mlid.attr,
- &dev_attr_mtu.attr,
- &dev_attr_nguid.attr,
- &dev_attr_nports.attr,
- &dev_attr_serial.attr,
- &dev_attr_status.attr,
- &dev_attr_status_str.attr,
- &dev_attr_boardversion.attr,
- &dev_attr_unit.attr,
- &dev_attr_enabled.attr,
- &dev_attr_rx_pol_inv.attr,
- &dev_attr_led_override.attr,
- &dev_attr_logged_errors.attr,
- &dev_attr_tempsense.attr,
- &dev_attr_localbus_info.attr,
- NULL
-};
-
-static struct attribute_group dev_attr_group = {
- .attrs = dev_attributes
-};
-
-static DEVICE_ATTR(hrtbt_enable, S_IWUSR | S_IRUGO, show_hrtbt_enb,
- store_hrtbt_enb);
-static DEVICE_ATTR(link_width_enable, S_IWUSR | S_IRUGO, show_lwid_enb,
- store_lwid_enb);
-static DEVICE_ATTR(link_width, S_IRUGO, show_lwid, NULL);
-static DEVICE_ATTR(link_speed_enable, S_IWUSR | S_IRUGO, show_spd_enb,
- store_spd_enb);
-static DEVICE_ATTR(link_speed, S_IRUGO, show_spd, NULL);
-static DEVICE_ATTR(rx_pol_inv_enable, S_IWUSR | S_IRUGO, show_rx_polinv_enb,
- store_rx_polinv_enb);
-static DEVICE_ATTR(rx_lane_rev_enable, S_IWUSR | S_IRUGO, show_lanerev_enb,
- store_lanerev_enb);
-
-static struct attribute *dev_ibcfg_attributes[] = {
- &dev_attr_hrtbt_enable.attr,
- &dev_attr_link_width_enable.attr,
- &dev_attr_link_width.attr,
- &dev_attr_link_speed_enable.attr,
- &dev_attr_link_speed.attr,
- &dev_attr_rx_pol_inv_enable.attr,
- &dev_attr_rx_lane_rev_enable.attr,
- NULL
-};
-
-static struct attribute_group dev_ibcfg_attr_group = {
- .attrs = dev_ibcfg_attributes
-};
-
-/**
- * ipath_expose_reset - create a device reset file
- * @dev: the device structure
- *
- * Only expose a file that lets us reset the device after someone
- * enters diag mode. A device reset is quite likely to crash the
- * machine entirely, so we don't want to normally make it
- * available.
- *
- * Called with ipath_mutex held.
- */
-int ipath_expose_reset(struct device *dev)
-{
- static int exposed;
- int ret;
-
- if (!exposed) {
- ret = device_create_file(dev, &dev_attr_reset);
- exposed = 1;
- } else {
- ret = 0;
- }
-
- return ret;
-}
-
-int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->kobj, &dev_attr_group);
- if (ret)
- goto bail;
-
- ret = sysfs_create_group(&dev->kobj, &dev_counter_attr_group);
- if (ret)
- goto bail_attrs;
-
- if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
- ret = device_create_file(dev, &dev_attr_jint_idle_ticks);
- if (ret)
- goto bail_counter;
- ret = device_create_file(dev, &dev_attr_jint_max_packets);
- if (ret)
- goto bail_idle;
-
- ret = sysfs_create_group(&dev->kobj, &dev_ibcfg_attr_group);
- if (ret)
- goto bail_max;
- }
-
- return 0;
-
-bail_max:
- device_remove_file(dev, &dev_attr_jint_max_packets);
-bail_idle:
- device_remove_file(dev, &dev_attr_jint_idle_ticks);
-bail_counter:
- sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
-bail_attrs:
- sysfs_remove_group(&dev->kobj, &dev_attr_group);
-bail:
- return ret;
-}
-
-void ipath_device_remove_group(struct device *dev, struct ipath_devdata *dd)
-{
- sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
-
- if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
- sysfs_remove_group(&dev->kobj, &dev_ibcfg_attr_group);
- device_remove_file(dev, &dev_attr_jint_idle_ticks);
- device_remove_file(dev, &dev_attr_jint_max_packets);
- }
-
- sysfs_remove_group(&dev->kobj, &dev_attr_group);
-
- device_remove_file(dev, &dev_attr_reset);
-}
diff --git a/drivers/staging/rdma/ipath/ipath_uc.c b/drivers/staging/rdma/ipath/ipath_uc.c
deleted file mode 100644
index 0246b30..0000000
--- a/drivers/staging/rdma/ipath/ipath_uc.c
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/* cut down ridiculously long IB macro names */
-#define OP(x) IB_OPCODE_UC_##x
-
-/**
- * ipath_make_uc_req - construct a request packet (SEND, RDMA write)
- * @qp: a pointer to the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_uc_req(struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- struct ipath_swqe *wqe;
- unsigned long flags;
- u32 hwords;
- u32 bth0;
- u32 len;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- int ret = 0;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
- bth0 = 1 << 22; /* Set M bit */
-
- /* Get the next send request. */
- wqe = get_swqe_ptr(qp, qp->s_cur);
- qp->s_wqe = NULL;
- switch (qp->s_state) {
- default:
- if (!(ib_ipath_state_ops[qp->state] &
- IPATH_PROCESS_NEXT_SEND_OK))
- goto bail;
- /* Check if send work queue is empty. */
- if (qp->s_cur == qp->s_head)
- goto bail;
- /*
- * Start a new request.
- */
- qp->s_psn = wqe->psn = qp->s_next_psn;
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->wr.num_sge;
- qp->s_len = len = wqe->length;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- if (len > pmtu) {
- qp->s_state = OP(SEND_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_ONLY);
- else {
- qp->s_state =
- OP(SEND_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->rdma_wr.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->rdma_wr.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- hwords += sizeof(struct ib_reth) / 4;
- if (len > pmtu) {
- qp->s_state = OP(RDMA_WRITE_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_ONLY);
- else {
- qp->s_state =
- OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the RETH */
- ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- default:
- goto bail;
- }
- break;
-
- case OP(SEND_FIRST):
- qp->s_state = OP(SEND_MIDDLE);
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_LAST);
- else {
- qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_WRITE_FIRST):
- qp->s_state = OP(RDMA_WRITE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_LAST);
- else {
- qp->s_state =
- OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
- }
- qp->s_len -= len;
- qp->s_hdrwords = hwords;
- qp->s_cur_sge = &qp->s_sge;
- qp->s_cur_size = len;
- ipath_make_ruc_header(to_idev(qp->ibqp.device),
- qp, ohdr, bth0 | (qp->s_state << 24),
- qp->s_next_psn++ & IPATH_PSN_MASK);
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_uc_rcv - handle an incoming UC packet
- * @dev: the device the packet came in on
- * @hdr: the header of the packet
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the length of the packet
- * @qp: the QP for this packet.
- *
- * This is called from ipath_qp_rcv() to process an incoming UC packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- int opcode;
- u32 hdrsize;
- u32 psn;
- u32 pad;
- struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- struct ib_reth *reth;
- int header_in_data;
-
- /* Validate the SLID. See Ch. 9.6.1.5 */
- if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
- goto done;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12; /* LRH + BTH */
- psn = be32_to_cpu(ohdr->bth[2]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
- /*
- * The header with GRH is 60 bytes and the
- * core driver sets the eager header buffer
- * size to 56 bytes so the last 4 bytes of
- * the BTH header (PSN) is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- psn = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- } else
- psn = be32_to_cpu(ohdr->bth[2]);
- }
- /*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
-
- memset(&wc, 0, sizeof wc);
-
- /* Compare the PSN verses the expected PSN. */
- if (unlikely(ipath_cmp24(psn, qp->r_psn) != 0)) {
- /*
- * Handle a sequence error.
- * Silently drop any current message.
- */
- qp->r_psn = psn;
- inv:
- qp->r_state = OP(SEND_LAST);
- switch (opcode) {
- case OP(SEND_FIRST):
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- goto send_first;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
- goto rdma_first;
-
- default:
- dev->n_pkt_drops++;
- goto done;
- }
- }
-
- /* Check for opcode sequence errors. */
- switch (qp->r_state) {
- case OP(SEND_FIRST):
- case OP(SEND_MIDDLE):
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE))
- break;
- goto inv;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_MIDDLE):
- if (opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- break;
- goto inv;
-
- default:
- if (opcode == OP(SEND_FIRST) ||
- opcode == OP(SEND_ONLY) ||
- opcode == OP(SEND_ONLY_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_FIRST) ||
- opcode == OP(RDMA_WRITE_ONLY) ||
- opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- break;
- goto inv;
- }
-
- /* OK, process the packet. */
- switch (opcode) {
- case OP(SEND_FIRST):
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- send_first:
- if (qp->r_flags & IPATH_R_REUSE_SGE) {
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- qp->r_sge = qp->s_rdma_read_sge;
- } else if (!ipath_get_rwqe(qp, 0)) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Save the WQE so we can reuse it in case of an error. */
- qp->s_rdma_read_sge = qp->r_sge;
- qp->r_rcv_len = 0;
- if (opcode == OP(SEND_ONLY))
- goto send_last;
- else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE))
- goto send_last_imm;
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4))) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len)) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(SEND_LAST_WITH_IMMEDIATE):
- send_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
- case OP(SEND_LAST):
- send_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- wc.byte_len = tlen + qp->r_rcv_len;
- if (unlikely(wc.byte_len > qp->r_len)) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- wc.opcode = IB_WC_RECV;
- last_imm:
- ipath_copy_sge(&qp->r_sge, data, tlen);
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
- break;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): /* consume RWQE */
- rdma_first:
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- hdrsize += sizeof(*reth);
- qp->r_len = be32_to_cpu(reth->length);
- qp->r_rcv_len = 0;
- if (qp->r_len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey */
- ok = ipath_rkey_ok(qp, &qp->r_sge, qp->r_len,
- vaddr, rkey,
- IB_ACCESS_REMOTE_WRITE);
- if (unlikely(!ok)) {
- dev->n_pkt_drops++;
- goto done;
- }
- } else {
- qp->r_sge.sg_list = NULL;
- qp->r_sge.sge.mr = NULL;
- qp->r_sge.sge.vaddr = NULL;
- qp->r_sge.sge.length = 0;
- qp->r_sge.sge.sge_length = 0;
- }
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE))) {
- dev->n_pkt_drops++;
- goto done;
- }
- if (opcode == OP(RDMA_WRITE_ONLY))
- goto rdma_last;
- else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- goto rdma_last_imm;
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
- rdma_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
-
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- if (qp->r_flags & IPATH_R_REUSE_SGE)
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- else if (!ipath_get_rwqe(qp, 1)) {
- dev->n_pkt_drops++;
- goto done;
- }
- wc.byte_len = qp->r_len;
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- goto last_imm;
-
- case OP(RDMA_WRITE_LAST):
- rdma_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, tlen);
- break;
-
- default:
- /* Drop packet for unknown opcodes. */
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_psn++;
- qp->r_state = opcode;
-done:
- return;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_ud.c b/drivers/staging/rdma/ipath/ipath_ud.c
deleted file mode 100644
index 385d941..0000000
--- a/drivers/staging/rdma/ipath/ipath_ud.c
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <rdma/ib_smi.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/**
- * ipath_ud_loopback - handle send on loopback QPs
- * @sqp: the sending QP
- * @swqe: the send work request
- *
- * This is called from ipath_make_ud_req() to forward a WQE addressed
- * to the same HCA.
- * Note that the receive interrupt handler may be calling ipath_ud_rcv()
- * while this is being called.
- */
-static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
-{
- struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
- struct ipath_qp *qp;
- struct ib_ah_attr *ah_attr;
- unsigned long flags;
- struct ipath_rq *rq;
- struct ipath_srq *srq;
- struct ipath_sge_state rsge;
- struct ipath_sge *sge;
- struct ipath_rwq *wq;
- struct ipath_rwqe *wqe;
- void (*handler)(struct ib_event *, void *);
- struct ib_wc wc;
- u32 tail;
- u32 rlen;
- u32 length;
-
- qp = ipath_lookup_qpn(&dev->qp_table, swqe->ud_wr.remote_qpn);
- if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- goto done;
- }
-
- /*
- * Check that the qkey matches (except for QP0, see 9.6.1.4.1).
- * Qkeys with the high order bit set mean use the
- * qkey from the QP context instead of the WR (see 10.2.5).
- */
- if (unlikely(qp->ibqp.qp_num &&
- ((int) swqe->ud_wr.remote_qkey < 0 ?
- sqp->qkey : swqe->ud_wr.remote_qkey) != qp->qkey)) {
- /* XXX OK to lose a count once in a while. */
- dev->qkey_violations++;
- dev->n_pkt_drops++;
- goto drop;
- }
-
- /*
- * A GRH is expected to precede the data even if not
- * present on the wire.
- */
- length = swqe->length;
- memset(&wc, 0, sizeof wc);
- wc.byte_len = length + sizeof(struct ib_grh);
-
- if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = swqe->wr.ex.imm_data;
- }
-
- /*
- * This would be a lot simpler if we could call ipath_get_rwqe()
- * but that uses state that the receive interrupt handler uses
- * so we would need to lock out receive interrupts while doing
- * local loopback.
- */
- if (qp->ibqp.srq) {
- srq = to_isrq(qp->ibqp.srq);
- handler = srq->ibsrq.event_handler;
- rq = &srq->rq;
- } else {
- srq = NULL;
- handler = NULL;
- rq = &qp->r_rq;
- }
-
- /*
- * Get the next work request entry to find where to put the data.
- * Note that it is safe to drop the lock after changing rq->tail
- * since ipath_post_receive() won't fill the empty slot.
- */
- spin_lock_irqsave(&rq->lock, flags);
- wq = rq->wq;
- tail = wq->tail;
- /* Validate tail before using it since it is user writable. */
- if (tail >= rq->size)
- tail = 0;
- if (unlikely(tail == wq->head)) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- wqe = get_rwqe_ptr(rq, tail);
- rsge.sg_list = qp->r_ud_sg_list;
- if (!ipath_init_sge(qp, wqe, &rlen, &rsge)) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- /* Silently drop packets which are too big. */
- if (wc.byte_len > rlen) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- if (++tail >= rq->size)
- tail = 0;
- wq->tail = tail;
- wc.wr_id = wqe->wr_id;
- if (handler) {
- u32 n;
-
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- n = wq->head;
- if (n >= rq->size)
- n = 0;
- if (n < tail)
- n += rq->size - tail;
- else
- n -= tail;
- if (n < srq->limit) {
- struct ib_event ev;
-
- srq->limit = 0;
- spin_unlock_irqrestore(&rq->lock, flags);
- ev.device = qp->ibqp.device;
- ev.element.srq = qp->ibqp.srq;
- ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
- handler(&ev, srq->ibsrq.srq_context);
- } else
- spin_unlock_irqrestore(&rq->lock, flags);
- } else
- spin_unlock_irqrestore(&rq->lock, flags);
-
- ah_attr = &to_iah(swqe->ud_wr.ah)->attr;
- if (ah_attr->ah_flags & IB_AH_GRH) {
- ipath_copy_sge(&rsge, &ah_attr->grh, sizeof(struct ib_grh));
- wc.wc_flags |= IB_WC_GRH;
- } else
- ipath_skip_sge(&rsge, sizeof(struct ib_grh));
- sge = swqe->sg_list;
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- ipath_copy_sge(&rsge, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--swqe->wr.num_sge)
- sge++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- length -= len;
- }
- wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- wc.src_qp = sqp->ibqp.qp_num;
- /* XXX do we know which pkey matched? Only needed for GSI. */
- wc.pkey_index = 0;
- wc.slid = dev->dd->ipath_lid |
- (ah_attr->src_path_bits &
- ((1 << dev->dd->ipath_lmc) - 1));
- wc.sl = ah_attr->sl;
- wc.dlid_path_bits =
- ah_attr->dlid & ((1 << dev->dd->ipath_lmc) - 1);
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- swqe->ud_wr.wr.send_flags & IB_SEND_SOLICITED);
-drop:
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-done:;
-}
-
-/**
- * ipath_make_ud_req - construct a UD request packet
- * @qp: the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_ud_req(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_other_headers *ohdr;
- struct ib_ah_attr *ah_attr;
- struct ipath_swqe *wqe;
- unsigned long flags;
- u32 nwords;
- u32 extra_bytes;
- u32 bth0;
- u16 lrh0;
- u16 lid;
- int ret = 0;
- int next_cur;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- if (qp->s_cur == qp->s_head)
- goto bail;
-
- wqe = get_swqe_ptr(qp, qp->s_cur);
- next_cur = qp->s_cur + 1;
- if (next_cur >= qp->s_size)
- next_cur = 0;
-
- /* Construct the header. */
- ah_attr = &to_iah(wqe->ud_wr.ah)->attr;
- if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE) {
- if (ah_attr->dlid != IPATH_PERMISSIVE_LID)
- dev->n_multicast_xmit++;
- else
- dev->n_unicast_xmit++;
- } else {
- dev->n_unicast_xmit++;
- lid = ah_attr->dlid & ~((1 << dev->dd->ipath_lmc) - 1);
- if (unlikely(lid == dev->dd->ipath_lid)) {
- /*
- * If DMAs are in progress, we can't generate
- * a completion for the loopback packet since
- * it would be out of order.
- * XXX Instead of waiting, we could queue a
- * zero length descriptor so we get a callback.
- */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- qp->s_cur = next_cur;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- ipath_ud_loopback(qp, wqe);
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, wqe, IB_WC_SUCCESS);
- goto done;
- }
- }
-
- qp->s_cur = next_cur;
- extra_bytes = -wqe->length & 3;
- nwords = (wqe->length + extra_bytes) >> 2;
-
- /* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */
- qp->s_hdrwords = 7;
- qp->s_cur_size = wqe->length;
- qp->s_cur_sge = &qp->s_sge;
- qp->s_dmult = ah_attr->static_rate;
- qp->s_wqe = wqe;
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->ud_wr.wr.num_sge;
-
- if (ah_attr->ah_flags & IB_AH_GRH) {
- /* Header size in 32-bit words. */
- qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
- &ah_attr->grh,
- qp->s_hdrwords, nwords);
- lrh0 = IPATH_LRH_GRH;
- ohdr = &qp->s_hdr.u.l.oth;
- /*
- * Don't worry about sending to locally attached multicast
- * QPs. It is unspecified by the spec. what happens.
- */
- } else {
- /* Header size in 32-bit words. */
- lrh0 = IPATH_LRH_BTH;
- ohdr = &qp->s_hdr.u.oth;
- }
- if (wqe->ud_wr.wr.opcode == IB_WR_SEND_WITH_IMM) {
- qp->s_hdrwords++;
- ohdr->u.ud.imm_data = wqe->ud_wr.wr.ex.imm_data;
- bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
- } else
- bth0 = IB_OPCODE_UD_SEND_ONLY << 24;
- lrh0 |= ah_attr->sl << 4;
- if (qp->ibqp.qp_type == IB_QPT_SMI)
- lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(ah_attr->dlid); /* DEST LID */
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
- SIZE_OF_CRC);
- lid = dev->dd->ipath_lid;
- if (lid) {
- lid |= ah_attr->src_path_bits &
- ((1 << dev->dd->ipath_lmc) - 1);
- qp->s_hdr.lrh[3] = cpu_to_be16(lid);
- } else
- qp->s_hdr.lrh[3] = IB_LID_PERMISSIVE;
- if (wqe->ud_wr.wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth0 |= extra_bytes << 20;
- bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPATH_DEFAULT_P_KEY :
- ipath_get_pkey(dev->dd, qp->s_pkey_index);
- ohdr->bth[0] = cpu_to_be32(bth0);
- /*
- * Use the multicast QP if the destination LID is a multicast LID.
- */
- ohdr->bth[1] = ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPATH_PERMISSIVE_LID ?
- cpu_to_be32(IPATH_MULTICAST_QPN) :
- cpu_to_be32(wqe->ud_wr.remote_qpn);
- ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPATH_PSN_MASK);
- /*
- * Qkeys with the high order bit set mean use the
- * qkey from the QP context instead of the WR (see 10.2.5).
- */
- ohdr->u.ud.deth[0] = cpu_to_be32((int)wqe->ud_wr.remote_qkey < 0 ?
- qp->qkey : wqe->ud_wr.remote_qkey);
- ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num);
-
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_ud_rcv - receive an incoming UD packet
- * @dev: the device the packet came in on
- * @hdr: the packet header
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP the packet came on
- *
- * This is called from ipath_qp_rcv() to process an incoming UD packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- int opcode;
- u32 hdrsize;
- u32 pad;
- struct ib_wc wc;
- u32 qkey;
- u32 src_qp;
- u16 dlid;
- int header_in_data;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12 + 8; /* LRH + BTH + DETH */
- qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
- src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12 + 8; /* LRH + GRH + BTH + DETH */
- /*
- * The header with GRH is 68 bytes and the core driver sets
- * the eager header buffer size to 56 bytes so the last 12
- * bytes of the IB header is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- qkey = be32_to_cpu(((__be32 *) data)[1]);
- src_qp = be32_to_cpu(((__be32 *) data)[2]);
- data += 12;
- } else {
- qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
- src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
- }
- }
- src_qp &= IPATH_QPN_MASK;
-
- /*
- * Check that the permissive LID is only used on QP0
- * and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1).
- */
- if (qp->ibqp.qp_num) {
- if (unlikely(hdr->lrh[1] == IB_LID_PERMISSIVE ||
- hdr->lrh[3] == IB_LID_PERMISSIVE)) {
- dev->n_pkt_drops++;
- goto bail;
- }
- if (unlikely(qkey != qp->qkey)) {
- /* XXX OK to lose a count once in a while. */
- dev->qkey_violations++;
- dev->n_pkt_drops++;
- goto bail;
- }
- } else if (hdr->lrh[1] == IB_LID_PERMISSIVE ||
- hdr->lrh[3] == IB_LID_PERMISSIVE) {
- struct ib_smp *smp = (struct ib_smp *) data;
-
- if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
- dev->n_pkt_drops++;
- goto bail;
- }
- }
-
- /*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- if (qp->ibqp.qp_num > 1 &&
- opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else
- wc.ex.imm_data = ohdr->u.ud.imm_data;
- wc.wc_flags = IB_WC_WITH_IMM;
- hdrsize += sizeof(u32);
- } else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
- wc.ex.imm_data = 0;
- wc.wc_flags = 0;
- } else {
- dev->n_pkt_drops++;
- goto bail;
- }
-
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- /* Drop incomplete packets. */
- dev->n_pkt_drops++;
- goto bail;
- }
- tlen -= hdrsize + pad + 4;
-
- /* Drop invalid MAD packets (see 13.5.3.1). */
- if (unlikely((qp->ibqp.qp_num == 0 &&
- (tlen != 256 ||
- (be16_to_cpu(hdr->lrh[0]) >> 12) != 15)) ||
- (qp->ibqp.qp_num == 1 &&
- (tlen != 256 ||
- (be16_to_cpu(hdr->lrh[0]) >> 12) == 15)))) {
- dev->n_pkt_drops++;
- goto bail;
- }
-
- /*
- * A GRH is expected to precede the data even if not
- * present on the wire.
- */
- wc.byte_len = tlen + sizeof(struct ib_grh);
-
- /*
- * Get the next work request entry to find where to put the data.
- */
- if (qp->r_flags & IPATH_R_REUSE_SGE)
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- else if (!ipath_get_rwqe(qp, 0)) {
- /*
- * Count VL15 packets dropped due to no receive buffer.
- * Otherwise, count them as buffer overruns since usually,
- * the HW will be able to receive packets even if there are
- * no QPs with posted receive buffers.
- */
- if (qp->ibqp.qp_num == 0)
- dev->n_vl15_dropped++;
- else
- dev->rcv_errors++;
- goto bail;
- }
- /* Silently drop packets which are too big. */
- if (wc.byte_len > qp->r_len) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto bail;
- }
- if (has_grh) {
- ipath_copy_sge(&qp->r_sge, &hdr->u.l.grh,
- sizeof(struct ib_grh));
- wc.wc_flags |= IB_WC_GRH;
- } else
- ipath_skip_sge(&qp->r_sge, sizeof(struct ib_grh));
- ipath_copy_sge(&qp->r_sge, data,
- wc.byte_len - sizeof(struct ib_grh));
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- goto bail;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
- wc.qp = &qp->ibqp;
- wc.src_qp = src_qp;
- /* XXX do we know which pkey matched? Only needed for GSI. */
- wc.pkey_index = 0;
- wc.slid = be16_to_cpu(hdr->lrh[3]);
- wc.sl = (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF;
- dlid = be16_to_cpu(hdr->lrh[1]);
- /*
- * Save the LMC lower bits if the destination LID is a unicast LID.
- */
- wc.dlid_path_bits = dlid >= IPATH_MULTICAST_LID_BASE ? 0 :
- dlid & ((1 << dev->dd->ipath_lmc) - 1);
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
-
-bail:;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_user_pages.c b/drivers/staging/rdma/ipath/ipath_user_pages.c
deleted file mode 100644
index d29b4da..0000000
--- a/drivers/staging/rdma/ipath/ipath_user_pages.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-
-#include "ipath_kernel.h"
-
-static void __ipath_release_user_pages(struct page **p, size_t num_pages,
- int dirty)
-{
- size_t i;
-
- for (i = 0; i < num_pages; i++) {
- ipath_cdbg(MM, "%lu/%lu put_page %p\n", (unsigned long) i,
- (unsigned long) num_pages, p[i]);
- if (dirty)
- set_page_dirty_lock(p[i]);
- put_page(p[i]);
- }
-}
-
-/* call with current->mm->mmap_sem held */
-static int __ipath_get_user_pages(unsigned long start_page, size_t num_pages,
- struct page **p)
-{
- unsigned long lock_limit;
- size_t got;
- int ret;
-
- lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
-
- if (num_pages > lock_limit) {
- ret = -ENOMEM;
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "pin %lx pages from vaddr %lx\n",
- (unsigned long) num_pages, start_page);
-
- for (got = 0; got < num_pages; got += ret) {
- ret = get_user_pages(current, current->mm,
- start_page + got * PAGE_SIZE,
- num_pages - got, 1, 1,
- p + got, NULL);
- if (ret < 0)
- goto bail_release;
- }
-
- current->mm->pinned_vm += num_pages;
-
- ret = 0;
- goto bail;
-
-bail_release:
- __ipath_release_user_pages(p, got, 0);
-bail:
- return ret;
-}
-
-/**
- * ipath_map_page - a safety wrapper around pci_map_page()
- *
- * A dma_addr of all 0's is interpreted by the chip as "disabled".
- * Unfortunately, it can also be a valid dma_addr returned on some
- * architectures.
- *
- * The powerpc iommu assigns dma_addrs in ascending order, so we don't
- * have to bother with retries or mapping a dummy page to insure we
- * don't just get the same mapping again.
- *
- * I'm sure we won't be so lucky with other iommu's, so FIXME.
- */
-dma_addr_t ipath_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- dma_addr_t phys;
-
- phys = pci_map_page(hwdev, page, offset, size, direction);
-
- if (phys == 0) {
- pci_unmap_page(hwdev, phys, size, direction);
- phys = pci_map_page(hwdev, page, offset, size, direction);
- /*
- * FIXME: If we get 0 again, we should keep this page,
- * map another, then free the 0 page.
- */
- }
-
- return phys;
-}
-
-/**
- * ipath_map_single - a safety wrapper around pci_map_single()
- *
- * Same idea as ipath_map_page().
- */
-dma_addr_t ipath_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
- int direction)
-{
- dma_addr_t phys;
-
- phys = pci_map_single(hwdev, ptr, size, direction);
-
- if (phys == 0) {
- pci_unmap_single(hwdev, phys, size, direction);
- phys = pci_map_single(hwdev, ptr, size, direction);
- /*
- * FIXME: If we get 0 again, we should keep this page,
- * map another, then free the 0 page.
- */
- }
-
- return phys;
-}
-
-/**
- * ipath_get_user_pages - lock user pages into memory
- * @start_page: the start page
- * @num_pages: the number of pages
- * @p: the output page structures
- *
- * This function takes a given start page (page aligned user virtual
- * address) and pins it and the following specified number of pages. For
- * now, num_pages is always 1, but that will probably change at some point
- * (because caller is doing expected sends on a single virtually contiguous
- * buffer, so we can do all pages at once).
- */
-int ipath_get_user_pages(unsigned long start_page, size_t num_pages,
- struct page **p)
-{
- int ret;
-
- down_write(¤t->mm->mmap_sem);
-
- ret = __ipath_get_user_pages(start_page, num_pages, p);
-
- up_write(¤t->mm->mmap_sem);
-
- return ret;
-}
-
-void ipath_release_user_pages(struct page **p, size_t num_pages)
-{
- down_write(¤t->mm->mmap_sem);
-
- __ipath_release_user_pages(p, num_pages, 1);
-
- current->mm->pinned_vm -= num_pages;
-
- up_write(¤t->mm->mmap_sem);
-}
-
-struct ipath_user_pages_work {
- struct work_struct work;
- struct mm_struct *mm;
- unsigned long num_pages;
-};
-
-static void user_pages_account(struct work_struct *_work)
-{
- struct ipath_user_pages_work *work =
- container_of(_work, struct ipath_user_pages_work, work);
-
- down_write(&work->mm->mmap_sem);
- work->mm->pinned_vm -= work->num_pages;
- up_write(&work->mm->mmap_sem);
- mmput(work->mm);
- kfree(work);
-}
-
-void ipath_release_user_pages_on_close(struct page **p, size_t num_pages)
-{
- struct ipath_user_pages_work *work;
- struct mm_struct *mm;
-
- __ipath_release_user_pages(p, num_pages, 1);
-
- mm = get_task_mm(current);
- if (!mm)
- return;
-
- work = kmalloc(sizeof(*work), GFP_KERNEL);
- if (!work)
- goto bail_mm;
-
- INIT_WORK(&work->work, user_pages_account);
- work->mm = mm;
- work->num_pages = num_pages;
-
- queue_work(ib_wq, &work->work);
- return;
-
-bail_mm:
- mmput(mm);
- return;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_user_sdma.c b/drivers/staging/rdma/ipath/ipath_user_sdma.c
deleted file mode 100644
index 8c12e3c..0000000
--- a/drivers/staging/rdma/ipath/ipath_user_sdma.c
+++ /dev/null
@@ -1,874 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/dmapool.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/highmem.h>
-#include <linux/io.h>
-#include <linux/uio.h>
-#include <linux/rbtree.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include "ipath_kernel.h"
-#include "ipath_user_sdma.h"
-
-/* minimum size of header */
-#define IPATH_USER_SDMA_MIN_HEADER_LENGTH 64
-/* expected size of headers (for dma_pool) */
-#define IPATH_USER_SDMA_EXP_HEADER_LENGTH 64
-/* length mask in PBC (lower 11 bits) */
-#define IPATH_PBC_LENGTH_MASK ((1 << 11) - 1)
-
-struct ipath_user_sdma_pkt {
- u8 naddr; /* dimension of addr (1..3) ... */
- u32 counter; /* sdma pkts queued counter for this entry */
- u64 added; /* global descq number of entries */
-
- struct {
- u32 offset; /* offset for kvaddr, addr */
- u32 length; /* length in page */
- u8 put_page; /* should we put_page? */
- u8 dma_mapped; /* is page dma_mapped? */
- struct page *page; /* may be NULL (coherent mem) */
- void *kvaddr; /* FIXME: only for pio hack */
- dma_addr_t addr;
- } addr[4]; /* max pages, any more and we coalesce */
- struct list_head list; /* list element */
-};
-
-struct ipath_user_sdma_queue {
- /*
- * pkts sent to dma engine are queued on this
- * list head. the type of the elements of this
- * list are struct ipath_user_sdma_pkt...
- */
- struct list_head sent;
-
- /* headers with expected length are allocated from here... */
- char header_cache_name[64];
- struct dma_pool *header_cache;
-
- /* packets are allocated from the slab cache... */
- char pkt_slab_name[64];
- struct kmem_cache *pkt_slab;
-
- /* as packets go on the queued queue, they are counted... */
- u32 counter;
- u32 sent_counter;
-
- /* dma page table */
- struct rb_root dma_pages_root;
-
- /* protect everything above... */
- struct mutex lock;
-};
-
-struct ipath_user_sdma_queue *
-ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport)
-{
- struct ipath_user_sdma_queue *pq =
- kmalloc(sizeof(struct ipath_user_sdma_queue), GFP_KERNEL);
-
- if (!pq)
- goto done;
-
- pq->counter = 0;
- pq->sent_counter = 0;
- INIT_LIST_HEAD(&pq->sent);
-
- mutex_init(&pq->lock);
-
- snprintf(pq->pkt_slab_name, sizeof(pq->pkt_slab_name),
- "ipath-user-sdma-pkts-%u-%02u.%02u", unit, port, sport);
- pq->pkt_slab = kmem_cache_create(pq->pkt_slab_name,
- sizeof(struct ipath_user_sdma_pkt),
- 0, 0, NULL);
-
- if (!pq->pkt_slab)
- goto err_kfree;
-
- snprintf(pq->header_cache_name, sizeof(pq->header_cache_name),
- "ipath-user-sdma-headers-%u-%02u.%02u", unit, port, sport);
- pq->header_cache = dma_pool_create(pq->header_cache_name,
- dev,
- IPATH_USER_SDMA_EXP_HEADER_LENGTH,
- 4, 0);
- if (!pq->header_cache)
- goto err_slab;
-
- pq->dma_pages_root = RB_ROOT;
-
- goto done;
-
-err_slab:
- kmem_cache_destroy(pq->pkt_slab);
-err_kfree:
- kfree(pq);
- pq = NULL;
-
-done:
- return pq;
-}
-
-static void ipath_user_sdma_init_frag(struct ipath_user_sdma_pkt *pkt,
- int i, size_t offset, size_t len,
- int put_page, int dma_mapped,
- struct page *page,
- void *kvaddr, dma_addr_t dma_addr)
-{
- pkt->addr[i].offset = offset;
- pkt->addr[i].length = len;
- pkt->addr[i].put_page = put_page;
- pkt->addr[i].dma_mapped = dma_mapped;
- pkt->addr[i].page = page;
- pkt->addr[i].kvaddr = kvaddr;
- pkt->addr[i].addr = dma_addr;
-}
-
-static void ipath_user_sdma_init_header(struct ipath_user_sdma_pkt *pkt,
- u32 counter, size_t offset,
- size_t len, int dma_mapped,
- struct page *page,
- void *kvaddr, dma_addr_t dma_addr)
-{
- pkt->naddr = 1;
- pkt->counter = counter;
- ipath_user_sdma_init_frag(pkt, 0, offset, len, 0, dma_mapped, page,
- kvaddr, dma_addr);
-}
-
-/* we've too many pages in the iovec, coalesce to a single page */
-static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov) {
- int ret = 0;
- struct page *page = alloc_page(GFP_KERNEL);
- void *mpage_save;
- char *mpage;
- int i;
- int len = 0;
- dma_addr_t dma_addr;
-
- if (!page) {
- ret = -ENOMEM;
- goto done;
- }
-
- mpage = kmap(page);
- mpage_save = mpage;
- for (i = 0; i < niov; i++) {
- int cfur;
-
- cfur = copy_from_user(mpage,
- iov[i].iov_base, iov[i].iov_len);
- if (cfur) {
- ret = -EFAULT;
- goto free_unmap;
- }
-
- mpage += iov[i].iov_len;
- len += iov[i].iov_len;
- }
-
- dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto free_unmap;
- }
-
- ipath_user_sdma_init_frag(pkt, 1, 0, len, 0, 1, page, mpage_save,
- dma_addr);
- pkt->naddr = 2;
-
- goto done;
-
-free_unmap:
- kunmap(page);
- __free_page(page);
-done:
- return ret;
-}
-
-/* how many pages in this iovec element? */
-static int ipath_user_sdma_num_pages(const struct iovec *iov)
-{
- const unsigned long addr = (unsigned long) iov->iov_base;
- const unsigned long len = iov->iov_len;
- const unsigned long spage = addr & PAGE_MASK;
- const unsigned long epage = (addr + len - 1) & PAGE_MASK;
-
- return 1 + ((epage - spage) >> PAGE_SHIFT);
-}
-
-/* truncate length to page boundary */
-static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
-{
- const unsigned long offset = offset_in_page(addr);
-
- return ((offset + len) > PAGE_SIZE) ? (PAGE_SIZE - offset) : len;
-}
-
-static void ipath_user_sdma_free_pkt_frag(struct device *dev,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- int frag)
-{
- const int i = frag;
-
- if (pkt->addr[i].page) {
- if (pkt->addr[i].dma_mapped)
- dma_unmap_page(dev,
- pkt->addr[i].addr,
- pkt->addr[i].length,
- DMA_TO_DEVICE);
-
- if (pkt->addr[i].kvaddr)
- kunmap(pkt->addr[i].page);
-
- if (pkt->addr[i].put_page)
- put_page(pkt->addr[i].page);
- else
- __free_page(pkt->addr[i].page);
- } else if (pkt->addr[i].kvaddr)
- /* free coherent mem from cache... */
- dma_pool_free(pq->header_cache,
- pkt->addr[i].kvaddr, pkt->addr[i].addr);
-}
-
-/* return number of pages pinned... */
-static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt,
- unsigned long addr, int tlen, int npages)
-{
- struct page *pages[2];
- int j;
- int ret;
-
- ret = get_user_pages_fast(addr, npages, 0, pages);
- if (ret != npages) {
- int i;
-
- for (i = 0; i < ret; i++)
- put_page(pages[i]);
-
- ret = -ENOMEM;
- goto done;
- }
-
- for (j = 0; j < npages; j++) {
- /* map the pages... */
- const int flen =
- ipath_user_sdma_page_length(addr, tlen);
- dma_addr_t dma_addr =
- dma_map_page(&dd->pcidev->dev,
- pages[j], 0, flen, DMA_TO_DEVICE);
- unsigned long fofs = offset_in_page(addr);
-
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto done;
- }
-
- ipath_user_sdma_init_frag(pkt, pkt->naddr, fofs, flen, 1, 1,
- pages[j], kmap(pages[j]),
- dma_addr);
-
- pkt->naddr++;
- addr += flen;
- tlen -= flen;
- }
-
-done:
- return ret;
-}
-
-static int ipath_user_sdma_pin_pkt(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov)
-{
- int ret = 0;
- unsigned long idx;
-
- for (idx = 0; idx < niov; idx++) {
- const int npages = ipath_user_sdma_num_pages(iov + idx);
- const unsigned long addr = (unsigned long) iov[idx].iov_base;
-
- ret = ipath_user_sdma_pin_pages(dd, pkt,
- addr, iov[idx].iov_len,
- npages);
- if (ret < 0)
- goto free_pkt;
- }
-
- goto done;
-
-free_pkt:
- for (idx = 0; idx < pkt->naddr; idx++)
- ipath_user_sdma_free_pkt_frag(&dd->pcidev->dev, pq, pkt, idx);
-
-done:
- return ret;
-}
-
-static int ipath_user_sdma_init_payload(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov, int npages)
-{
- int ret = 0;
-
- if (npages >= ARRAY_SIZE(pkt->addr))
- ret = ipath_user_sdma_coalesce(dd, pkt, iov, niov);
- else
- ret = ipath_user_sdma_pin_pkt(dd, pq, pkt, iov, niov);
-
- return ret;
-}
-
-/* free a packet list -- return counter value of last packet */
-static void ipath_user_sdma_free_pkt_list(struct device *dev,
- struct ipath_user_sdma_queue *pq,
- struct list_head *list)
-{
- struct ipath_user_sdma_pkt *pkt, *pkt_next;
-
- list_for_each_entry_safe(pkt, pkt_next, list, list) {
- int i;
-
- for (i = 0; i < pkt->naddr; i++)
- ipath_user_sdma_free_pkt_frag(dev, pq, pkt, i);
-
- kmem_cache_free(pq->pkt_slab, pkt);
- }
-}
-
-/*
- * copy headers, coalesce etc -- pq->lock must be held
- *
- * we queue all the packets to list, returning the
- * number of bytes total. list must be empty initially,
- * as, if there is an error we clean it...
- */
-static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct list_head *list,
- const struct iovec *iov,
- unsigned long niov,
- int maxpkts)
-{
- unsigned long idx = 0;
- int ret = 0;
- int npkts = 0;
- struct page *page = NULL;
- __le32 *pbc;
- dma_addr_t dma_addr;
- struct ipath_user_sdma_pkt *pkt = NULL;
- size_t len;
- size_t nw;
- u32 counter = pq->counter;
- int dma_mapped = 0;
-
- while (idx < niov && npkts < maxpkts) {
- const unsigned long addr = (unsigned long) iov[idx].iov_base;
- const unsigned long idx_save = idx;
- unsigned pktnw;
- unsigned pktnwc;
- int nfrags = 0;
- int npages = 0;
- int cfur;
-
- dma_mapped = 0;
- len = iov[idx].iov_len;
- nw = len >> 2;
- page = NULL;
-
- pkt = kmem_cache_alloc(pq->pkt_slab, GFP_KERNEL);
- if (!pkt) {
- ret = -ENOMEM;
- goto free_list;
- }
-
- if (len < IPATH_USER_SDMA_MIN_HEADER_LENGTH ||
- len > PAGE_SIZE || len & 3 || addr & 3) {
- ret = -EINVAL;
- goto free_pkt;
- }
-
- if (len == IPATH_USER_SDMA_EXP_HEADER_LENGTH)
- pbc = dma_pool_alloc(pq->header_cache, GFP_KERNEL,
- &dma_addr);
- else
- pbc = NULL;
-
- if (!pbc) {
- page = alloc_page(GFP_KERNEL);
- if (!page) {
- ret = -ENOMEM;
- goto free_pkt;
- }
- pbc = kmap(page);
- }
-
- cfur = copy_from_user(pbc, iov[idx].iov_base, len);
- if (cfur) {
- ret = -EFAULT;
- goto free_pbc;
- }
-
- /*
- * this assignment is a bit strange. it's because the
- * the pbc counts the number of 32 bit words in the full
- * packet _except_ the first word of the pbc itself...
- */
- pktnwc = nw - 1;
-
- /*
- * pktnw computation yields the number of 32 bit words
- * that the caller has indicated in the PBC. note that
- * this is one less than the total number of words that
- * goes to the send DMA engine as the first 32 bit word
- * of the PBC itself is not counted. Armed with this count,
- * we can verify that the packet is consistent with the
- * iovec lengths.
- */
- pktnw = le32_to_cpu(*pbc) & IPATH_PBC_LENGTH_MASK;
- if (pktnw < pktnwc || pktnw > pktnwc + (PAGE_SIZE >> 2)) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
-
- idx++;
- while (pktnwc < pktnw && idx < niov) {
- const size_t slen = iov[idx].iov_len;
- const unsigned long faddr =
- (unsigned long) iov[idx].iov_base;
-
- if (slen & 3 || faddr & 3 || !slen ||
- slen > PAGE_SIZE) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
- npages++;
- if ((faddr & PAGE_MASK) !=
- ((faddr + slen - 1) & PAGE_MASK))
- npages++;
-
- pktnwc += slen >> 2;
- idx++;
- nfrags++;
- }
-
- if (pktnwc != pktnw) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
- if (page) {
- dma_addr = dma_map_page(&dd->pcidev->dev,
- page, 0, len, DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto free_pbc;
- }
-
- dma_mapped = 1;
- }
-
- ipath_user_sdma_init_header(pkt, counter, 0, len, dma_mapped,
- page, pbc, dma_addr);
-
- if (nfrags) {
- ret = ipath_user_sdma_init_payload(dd, pq, pkt,
- iov + idx_save + 1,
- nfrags, npages);
- if (ret < 0)
- goto free_pbc_dma;
- }
-
- counter++;
- npkts++;
-
- list_add_tail(&pkt->list, list);
- }
-
- ret = idx;
- goto done;
-
-free_pbc_dma:
- if (dma_mapped)
- dma_unmap_page(&dd->pcidev->dev, dma_addr, len, DMA_TO_DEVICE);
-free_pbc:
- if (page) {
- kunmap(page);
- __free_page(page);
- } else
- dma_pool_free(pq->header_cache, pbc, dma_addr);
-free_pkt:
- kmem_cache_free(pq->pkt_slab, pkt);
-free_list:
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, list);
-done:
- return ret;
-}
-
-static void ipath_user_sdma_set_complete_counter(struct ipath_user_sdma_queue *pq,
- u32 c)
-{
- pq->sent_counter = c;
-}
-
-/* try to clean out queue -- needs pq->lock */
-static int ipath_user_sdma_queue_clean(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- struct list_head free_list;
- struct ipath_user_sdma_pkt *pkt;
- struct ipath_user_sdma_pkt *pkt_prev;
- int ret = 0;
-
- INIT_LIST_HEAD(&free_list);
-
- list_for_each_entry_safe(pkt, pkt_prev, &pq->sent, list) {
- s64 descd = dd->ipath_sdma_descq_removed - pkt->added;
-
- if (descd < 0)
- break;
-
- list_move_tail(&pkt->list, &free_list);
-
- /* one more packet cleaned */
- ret++;
- }
-
- if (!list_empty(&free_list)) {
- u32 counter;
-
- pkt = list_entry(free_list.prev,
- struct ipath_user_sdma_pkt, list);
- counter = pkt->counter;
-
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
- ipath_user_sdma_set_complete_counter(pq, counter);
- }
-
- return ret;
-}
-
-void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq)
-{
- if (!pq)
- return;
-
- kmem_cache_destroy(pq->pkt_slab);
- dma_pool_destroy(pq->header_cache);
- kfree(pq);
-}
-
-/* clean descriptor queue, returns > 0 if some elements cleaned */
-static int ipath_user_sdma_hwqueue_clean(struct ipath_devdata *dd)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- ret = ipath_sdma_make_progress(dd);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- return ret;
-}
-
-/* we're in close, drain packets so that we can cleanup successfully... */
-void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- int i;
-
- if (!pq)
- return;
-
- for (i = 0; i < 100; i++) {
- mutex_lock(&pq->lock);
- if (list_empty(&pq->sent)) {
- mutex_unlock(&pq->lock);
- break;
- }
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- mutex_unlock(&pq->lock);
- msleep(10);
- }
-
- if (!list_empty(&pq->sent)) {
- struct list_head free_list;
-
- printk(KERN_INFO "drain: lists not empty: forcing!\n");
- INIT_LIST_HEAD(&free_list);
- mutex_lock(&pq->lock);
- list_splice_init(&pq->sent, &free_list);
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
- mutex_unlock(&pq->lock);
- }
-}
-
-static inline __le64 ipath_sdma_make_desc0(struct ipath_devdata *dd,
- u64 addr, u64 dwlen, u64 dwoffset)
-{
- return cpu_to_le64(/* SDmaPhyAddr[31:0] */
- ((addr & 0xfffffffcULL) << 32) |
- /* SDmaGeneration[1:0] */
- ((dd->ipath_sdma_generation & 3ULL) << 30) |
- /* SDmaDwordCount[10:0] */
- ((dwlen & 0x7ffULL) << 16) |
- /* SDmaBufOffset[12:2] */
- (dwoffset & 0x7ffULL));
-}
-
-static inline __le64 ipath_sdma_make_first_desc0(__le64 descq)
-{
- return descq | cpu_to_le64(1ULL << 12);
-}
-
-static inline __le64 ipath_sdma_make_last_desc0(__le64 descq)
-{
- /* last */ /* dma head */
- return descq | cpu_to_le64(1ULL << 11 | 1ULL << 13);
-}
-
-static inline __le64 ipath_sdma_make_desc1(u64 addr)
-{
- /* SDmaPhyAddr[47:32] */
- return cpu_to_le64(addr >> 32);
-}
-
-static void ipath_user_sdma_send_frag(struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt, int idx,
- unsigned ofs, u16 tail)
-{
- const u64 addr = (u64) pkt->addr[idx].addr +
- (u64) pkt->addr[idx].offset;
- const u64 dwlen = (u64) pkt->addr[idx].length / 4;
- __le64 *descqp;
- __le64 descq0;
-
- descqp = &dd->ipath_sdma_descq[tail].qw[0];
-
- descq0 = ipath_sdma_make_desc0(dd, addr, dwlen, ofs);
- if (idx == 0)
- descq0 = ipath_sdma_make_first_desc0(descq0);
- if (idx == pkt->naddr - 1)
- descq0 = ipath_sdma_make_last_desc0(descq0);
-
- descqp[0] = descq0;
- descqp[1] = ipath_sdma_make_desc1(addr);
-}
-
-/* pq->lock must be held, get packets on the wire... */
-static int ipath_user_sdma_push_pkts(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct list_head *pktlist)
-{
- int ret = 0;
- unsigned long flags;
- u16 tail;
-
- if (list_empty(pktlist))
- return 0;
-
- if (unlikely(!(dd->ipath_flags & IPATH_LINKACTIVE)))
- return -ECOMM;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- if (unlikely(dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK)) {
- ret = -ECOMM;
- goto unlock;
- }
-
- tail = dd->ipath_sdma_descq_tail;
- while (!list_empty(pktlist)) {
- struct ipath_user_sdma_pkt *pkt =
- list_entry(pktlist->next, struct ipath_user_sdma_pkt,
- list);
- int i;
- unsigned ofs = 0;
- u16 dtail = tail;
-
- if (pkt->naddr > ipath_sdma_descq_freecnt(dd))
- goto unlock_check_tail;
-
- for (i = 0; i < pkt->naddr; i++) {
- ipath_user_sdma_send_frag(dd, pkt, i, ofs, tail);
- ofs += pkt->addr[i].length >> 2;
-
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- ++dd->ipath_sdma_generation;
- }
- }
-
- if ((ofs<<2) > dd->ipath_ibmaxlen) {
- ipath_dbg("packet size %X > ibmax %X, fail\n",
- ofs<<2, dd->ipath_ibmaxlen);
- ret = -EMSGSIZE;
- goto unlock;
- }
-
- /*
- * if the packet is >= 2KB mtu equivalent, we have to use
- * the large buffers, and have to mark each descriptor as
- * part of a large buffer packet.
- */
- if (ofs >= IPATH_SMALLBUF_DWORDS) {
- for (i = 0; i < pkt->naddr; i++) {
- dd->ipath_sdma_descq[dtail].qw[0] |=
- cpu_to_le64(1ULL << 14);
- if (++dtail == dd->ipath_sdma_descq_cnt)
- dtail = 0;
- }
- }
-
- dd->ipath_sdma_descq_added += pkt->naddr;
- pkt->added = dd->ipath_sdma_descq_added;
- list_move_tail(&pkt->list, &pq->sent);
- ret++;
- }
-
-unlock_check_tail:
- /* advance the tail on the chip if necessary */
- if (dd->ipath_sdma_descq_tail != tail) {
- wmb();
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
- dd->ipath_sdma_descq_tail = tail;
- }
-
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- return ret;
-}
-
-int ipath_user_sdma_writev(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- const struct iovec *iov,
- unsigned long dim)
-{
- int ret = 0;
- struct list_head list;
- int npkts = 0;
-
- INIT_LIST_HEAD(&list);
-
- mutex_lock(&pq->lock);
-
- if (dd->ipath_sdma_descq_added != dd->ipath_sdma_descq_removed) {
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- }
-
- while (dim) {
- const int mxp = 8;
-
- ret = ipath_user_sdma_queue_pkts(dd, pq, &list, iov, dim, mxp);
- if (ret <= 0)
- goto done_unlock;
- else {
- dim -= ret;
- iov += ret;
- }
-
- /* force packets onto the sdma hw queue... */
- if (!list_empty(&list)) {
- /*
- * lazily clean hw queue. the 4 is a guess of about
- * how many sdma descriptors a packet will take (it
- * doesn't have to be perfect).
- */
- if (ipath_sdma_descq_freecnt(dd) < ret * 4) {
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- }
-
- ret = ipath_user_sdma_push_pkts(dd, pq, &list);
- if (ret < 0)
- goto done_unlock;
- else {
- npkts += ret;
- pq->counter += ret;
-
- if (!list_empty(&list))
- goto done_unlock;
- }
- }
- }
-
-done_unlock:
- if (!list_empty(&list))
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &list);
- mutex_unlock(&pq->lock);
-
- return (ret < 0) ? ret : npkts;
-}
-
-int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- int ret = 0;
-
- mutex_lock(&pq->lock);
- ipath_user_sdma_hwqueue_clean(dd);
- ret = ipath_user_sdma_queue_clean(dd, pq);
- mutex_unlock(&pq->lock);
-
- return ret;
-}
-
-u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq)
-{
- return pq->sent_counter;
-}
-
-u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq)
-{
- return pq->counter;
-}
-
diff --git a/drivers/staging/rdma/ipath/ipath_user_sdma.h b/drivers/staging/rdma/ipath/ipath_user_sdma.h
deleted file mode 100644
index fc76316..0000000
--- a/drivers/staging/rdma/ipath/ipath_user_sdma.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#include <linux/device.h>
-
-struct ipath_user_sdma_queue;
-
-struct ipath_user_sdma_queue *
-ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport);
-void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq);
-
-int ipath_user_sdma_writev(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- const struct iovec *iov,
- unsigned long dim);
-
-int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq);
-
-void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq);
-
-u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq);
-u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq);
diff --git a/drivers/staging/rdma/ipath/ipath_verbs.c b/drivers/staging/rdma/ipath/ipath_verbs.c
deleted file mode 100644
index 53f9dca..0000000
--- a/drivers/staging/rdma/ipath/ipath_verbs.c
+++ /dev/null
@@ -1,2376 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <rdma/ib_mad.h>
-#include <rdma/ib_user_verbs.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/utsname.h>
-#include <linux/rculist.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-static unsigned int ib_ipath_qp_table_size = 251;
-module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO);
-MODULE_PARM_DESC(qp_table_size, "QP table size");
-
-unsigned int ib_ipath_lkey_table_size = 12;
-module_param_named(lkey_table_size, ib_ipath_lkey_table_size, uint,
- S_IRUGO);
-MODULE_PARM_DESC(lkey_table_size,
- "LKEY table size in bits (2^n, 1 <= n <= 23)");
-
-static unsigned int ib_ipath_max_pds = 0xFFFF;
-module_param_named(max_pds, ib_ipath_max_pds, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_pds,
- "Maximum number of protection domains to support");
-
-static unsigned int ib_ipath_max_ahs = 0xFFFF;
-module_param_named(max_ahs, ib_ipath_max_ahs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support");
-
-unsigned int ib_ipath_max_cqes = 0x2FFFF;
-module_param_named(max_cqes, ib_ipath_max_cqes, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_cqes,
- "Maximum number of completion queue entries to support");
-
-unsigned int ib_ipath_max_cqs = 0x1FFFF;
-module_param_named(max_cqs, ib_ipath_max_cqs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support");
-
-unsigned int ib_ipath_max_qp_wrs = 0x3FFF;
-module_param_named(max_qp_wrs, ib_ipath_max_qp_wrs, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support");
-
-unsigned int ib_ipath_max_qps = 16384;
-module_param_named(max_qps, ib_ipath_max_qps, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support");
-
-unsigned int ib_ipath_max_sges = 0x60;
-module_param_named(max_sges, ib_ipath_max_sges, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support");
-
-unsigned int ib_ipath_max_mcast_grps = 16384;
-module_param_named(max_mcast_grps, ib_ipath_max_mcast_grps, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_mcast_grps,
- "Maximum number of multicast groups to support");
-
-unsigned int ib_ipath_max_mcast_qp_attached = 16;
-module_param_named(max_mcast_qp_attached, ib_ipath_max_mcast_qp_attached,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_mcast_qp_attached,
- "Maximum number of attached QPs to support");
-
-unsigned int ib_ipath_max_srqs = 1024;
-module_param_named(max_srqs, ib_ipath_max_srqs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support");
-
-unsigned int ib_ipath_max_srq_sges = 128;
-module_param_named(max_srq_sges, ib_ipath_max_srq_sges,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support");
-
-unsigned int ib_ipath_max_srq_wrs = 0x1FFFF;
-module_param_named(max_srq_wrs, ib_ipath_max_srq_wrs,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support");
-
-static unsigned int ib_ipath_disable_sma;
-module_param_named(disable_sma, ib_ipath_disable_sma, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(disable_sma, "Disable the SMA");
-
-/*
- * Note that it is OK to post send work requests in the SQE and ERR
- * states; ipath_do_send() will process them and generate error
- * completions as per IB 1.2 C10-96.
- */
-const int ib_ipath_state_ops[IB_QPS_ERR + 1] = {
- [IB_QPS_RESET] = 0,
- [IB_QPS_INIT] = IPATH_POST_RECV_OK,
- [IB_QPS_RTR] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK,
- [IB_QPS_RTS] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK |
- IPATH_PROCESS_NEXT_SEND_OK,
- [IB_QPS_SQD] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK,
- [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
- [IB_QPS_ERR] = IPATH_POST_RECV_OK | IPATH_FLUSH_RECV |
- IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
-};
-
-struct ipath_ucontext {
- struct ib_ucontext ibucontext;
-};
-
-static inline struct ipath_ucontext *to_iucontext(struct ib_ucontext
- *ibucontext)
-{
- return container_of(ibucontext, struct ipath_ucontext, ibucontext);
-}
-
-/*
- * Translate ib_wr_opcode into ib_wc_opcode.
- */
-const enum ib_wc_opcode ib_ipath_wc_opcode[] = {
- [IB_WR_RDMA_WRITE] = IB_WC_RDMA_WRITE,
- [IB_WR_RDMA_WRITE_WITH_IMM] = IB_WC_RDMA_WRITE,
- [IB_WR_SEND] = IB_WC_SEND,
- [IB_WR_SEND_WITH_IMM] = IB_WC_SEND,
- [IB_WR_RDMA_READ] = IB_WC_RDMA_READ,
- [IB_WR_ATOMIC_CMP_AND_SWP] = IB_WC_COMP_SWAP,
- [IB_WR_ATOMIC_FETCH_AND_ADD] = IB_WC_FETCH_ADD
-};
-
-/*
- * System image GUID.
- */
-static __be64 sys_image_guid;
-
-/**
- * ipath_copy_sge - copy data to SGE memory
- * @ss: the SGE state
- * @data: the data to copy
- * @length: the length of the data
- */
-void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- memcpy(sge->vaddr, data, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- data += len;
- length -= len;
- }
-}
-
-/**
- * ipath_skip_sge - skip over SGE memory - XXX almost dup of prev func
- * @ss: the SGE state
- * @length: the number of bytes to skip
- */
-void ipath_skip_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- length -= len;
- }
-}
-
-/*
- * Count the number of DMA descriptors needed to send length bytes of data.
- * Don't modify the ipath_sge_state to get the count.
- * Return zero if any of the segments is not aligned.
- */
-static u32 ipath_count_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sg_list = ss->sg_list;
- struct ipath_sge sge = ss->sge;
- u8 num_sge = ss->num_sge;
- u32 ndesc = 1; /* count the header */
-
- while (length) {
- u32 len = sge.length;
-
- if (len > length)
- len = length;
- if (len > sge.sge_length)
- len = sge.sge_length;
- BUG_ON(len == 0);
- if (((long) sge.vaddr & (sizeof(u32) - 1)) ||
- (len != length && (len & (sizeof(u32) - 1)))) {
- ndesc = 0;
- break;
- }
- ndesc++;
- sge.vaddr += len;
- sge.length -= len;
- sge.sge_length -= len;
- if (sge.sge_length == 0) {
- if (--num_sge)
- sge = *sg_list++;
- } else if (sge.length == 0 && sge.mr != NULL) {
- if (++sge.n >= IPATH_SEGSZ) {
- if (++sge.m >= sge.mr->mapsz)
- break;
- sge.n = 0;
- }
- sge.vaddr =
- sge.mr->map[sge.m]->segs[sge.n].vaddr;
- sge.length =
- sge.mr->map[sge.m]->segs[sge.n].length;
- }
- length -= len;
- }
- return ndesc;
-}
-
-/*
- * Copy from the SGEs to the data buffer.
- */
-static void ipath_copy_from_sge(void *data, struct ipath_sge_state *ss,
- u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- memcpy(data, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- data += len;
- length -= len;
- }
-}
-
-/**
- * ipath_post_one_send - post one RC, UC, or UD send work request
- * @qp: the QP to post on
- * @wr: the work request to send
- */
-static int ipath_post_one_send(struct ipath_qp *qp, struct ib_send_wr *wr)
-{
- struct ipath_swqe *wqe;
- u32 next;
- int i;
- int j;
- int acc;
- int ret;
- unsigned long flags;
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (qp->ibqp.qp_type != IB_QPT_SMI &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- ret = -ENETDOWN;
- goto bail;
- }
-
- /* Check that state is OK to post send. */
- if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK)))
- goto bail_inval;
-
- /* IB spec says that num_sge == 0 is OK. */
- if (wr->num_sge > qp->s_max_sge)
- goto bail_inval;
-
- /*
- * Don't allow RDMA reads or atomic operations on UC or
- * undefined operations.
- * Make sure buffer is large enough to hold the result for atomics.
- */
- if (qp->ibqp.qp_type == IB_QPT_UC) {
- if ((unsigned) wr->opcode >= IB_WR_RDMA_READ)
- goto bail_inval;
- } else if (qp->ibqp.qp_type == IB_QPT_UD) {
- /* Check UD opcode */
- if (wr->opcode != IB_WR_SEND &&
- wr->opcode != IB_WR_SEND_WITH_IMM)
- goto bail_inval;
- /* Check UD destination address PD */
- if (qp->ibqp.pd != ud_wr(wr)->ah->pd)
- goto bail_inval;
- } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD)
- goto bail_inval;
- else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
- (wr->num_sge == 0 ||
- wr->sg_list[0].length < sizeof(u64) ||
- wr->sg_list[0].addr & (sizeof(u64) - 1)))
- goto bail_inval;
- else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic)
- goto bail_inval;
-
- next = qp->s_head + 1;
- if (next >= qp->s_size)
- next = 0;
- if (next == qp->s_last) {
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_swqe_ptr(qp, qp->s_head);
-
- if (qp->ibqp.qp_type != IB_QPT_UC &&
- qp->ibqp.qp_type != IB_QPT_RC)
- memcpy(&wqe->ud_wr, ud_wr(wr), sizeof(wqe->ud_wr));
- else if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM ||
- wr->opcode == IB_WR_RDMA_WRITE ||
- wr->opcode == IB_WR_RDMA_READ)
- memcpy(&wqe->rdma_wr, rdma_wr(wr), sizeof(wqe->rdma_wr));
- else if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wr->opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
- memcpy(&wqe->atomic_wr, atomic_wr(wr), sizeof(wqe->atomic_wr));
- else
- memcpy(&wqe->wr, wr, sizeof(wqe->wr));
-
- wqe->length = 0;
- if (wr->num_sge) {
- acc = wr->opcode >= IB_WR_RDMA_READ ?
- IB_ACCESS_LOCAL_WRITE : 0;
- for (i = 0, j = 0; i < wr->num_sge; i++) {
- u32 length = wr->sg_list[i].length;
- int ok;
-
- if (length == 0)
- continue;
- ok = ipath_lkey_ok(qp, &wqe->sg_list[j],
- &wr->sg_list[i], acc);
- if (!ok)
- goto bail_inval;
- wqe->length += length;
- j++;
- }
- wqe->wr.num_sge = j;
- }
- if (qp->ibqp.qp_type == IB_QPT_UC ||
- qp->ibqp.qp_type == IB_QPT_RC) {
- if (wqe->length > 0x80000000U)
- goto bail_inval;
- } else if (wqe->length > to_idev(qp->ibqp.device)->dd->ipath_ibmtu)
- goto bail_inval;
- wqe->ssn = qp->s_ssn++;
- qp->s_head = next;
-
- ret = 0;
- goto bail;
-
-bail_inval:
- ret = -EINVAL;
-bail:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_post_send - post a send on a QP
- * @ibqp: the QP to post the send on
- * @wr: the list of work requests to post
- * @bad_wr: the first bad WR is put here
- *
- * This may be called from interrupt context.
- */
-static int ipath_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
- struct ib_send_wr **bad_wr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- int err = 0;
-
- for (; wr; wr = wr->next) {
- err = ipath_post_one_send(qp, wr);
- if (err) {
- *bad_wr = wr;
- goto bail;
- }
- }
-
- /* Try to do the send work in the caller's context. */
- ipath_do_send((unsigned long) qp);
-
-bail:
- return err;
-}
-
-/**
- * ipath_post_receive - post a receive on a QP
- * @ibqp: the QP to post the receive on
- * @wr: the WR to post
- * @bad_wr: the first bad WR is put here
- *
- * This may be called from interrupt context.
- */
-static int ipath_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_rwq *wq = qp->r_rq.wq;
- unsigned long flags;
- int ret;
-
- /* Check that state is OK to post receive. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_POST_RECV_OK) || !wq) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- for (; wr; wr = wr->next) {
- struct ipath_rwqe *wqe;
- u32 next;
- int i;
-
- if ((unsigned) wr->num_sge > qp->r_rq.max_sge) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&qp->r_rq.lock, flags);
- next = wq->head + 1;
- if (next >= qp->r_rq.size)
- next = 0;
- if (next == wq->tail) {
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
- *bad_wr = wr;
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_rwqe_ptr(&qp->r_rq, wq->head);
- wqe->wr_id = wr->wr_id;
- wqe->num_sge = wr->num_sge;
- for (i = 0; i < wr->num_sge; i++)
- wqe->sg_list[i] = wr->sg_list[i];
- /* Make sure queue entry is written before the head index. */
- smp_wmb();
- wq->head = next;
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_qp_rcv - processing an incoming packet on a QP
- * @dev: the device the packet came on
- * @hdr: the packet header
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP the packet came on
- *
- * This is called from ipath_ib_rcv() to process an incoming packet
- * for the given QP.
- * Called at interrupt level.
- */
-static void ipath_qp_rcv(struct ipath_ibdev *dev,
- struct ipath_ib_header *hdr, int has_grh,
- void *data, u32 tlen, struct ipath_qp *qp)
-{
- /* Check for valid receive state. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- return;
- }
-
- switch (qp->ibqp.qp_type) {
- case IB_QPT_SMI:
- case IB_QPT_GSI:
- if (ib_ipath_disable_sma)
- break;
- /* FALLTHROUGH */
- case IB_QPT_UD:
- ipath_ud_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- case IB_QPT_RC:
- ipath_rc_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- case IB_QPT_UC:
- ipath_uc_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * ipath_ib_rcv - process an incoming packet
- * @arg: the device pointer
- * @rhdr: the header of the packet
- * @data: the packet data
- * @tlen: the packet length
- *
- * This is called from ipath_kreceive() to process an incoming packet at
- * interrupt level. Tlen is the length of the header + data + CRC in bytes.
- */
-void ipath_ib_rcv(struct ipath_ibdev *dev, void *rhdr, void *data,
- u32 tlen)
-{
- struct ipath_ib_header *hdr = rhdr;
- struct ipath_other_headers *ohdr;
- struct ipath_qp *qp;
- u32 qp_num;
- int lnh;
- u8 opcode;
- u16 lid;
-
- if (unlikely(dev == NULL))
- goto bail;
-
- if (unlikely(tlen < 24)) { /* LRH+BTH+CRC */
- dev->rcv_errors++;
- goto bail;
- }
-
- /* Check for a valid destination LID (see ch. 7.11.1). */
- lid = be16_to_cpu(hdr->lrh[1]);
- if (lid < IPATH_MULTICAST_LID_BASE) {
- lid &= ~((1 << dev->dd->ipath_lmc) - 1);
- if (unlikely(lid != dev->dd->ipath_lid)) {
- dev->rcv_errors++;
- goto bail;
- }
- }
-
- /* Check for GRH */
- lnh = be16_to_cpu(hdr->lrh[0]) & 3;
- if (lnh == IPATH_LRH_BTH)
- ohdr = &hdr->u.oth;
- else if (lnh == IPATH_LRH_GRH)
- ohdr = &hdr->u.l.oth;
- else {
- dev->rcv_errors++;
- goto bail;
- }
-
- opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
- dev->opstats[opcode].n_bytes += tlen;
- dev->opstats[opcode].n_packets++;
-
- /* Get the destination QP number. */
- qp_num = be32_to_cpu(ohdr->bth[1]) & IPATH_QPN_MASK;
- if (qp_num == IPATH_MULTICAST_QPN) {
- struct ipath_mcast *mcast;
- struct ipath_mcast_qp *p;
-
- if (lnh != IPATH_LRH_GRH) {
- dev->n_pkt_drops++;
- goto bail;
- }
- mcast = ipath_mcast_find(&hdr->u.l.grh.dgid);
- if (mcast == NULL) {
- dev->n_pkt_drops++;
- goto bail;
- }
- dev->n_multicast_rcv++;
- list_for_each_entry_rcu(p, &mcast->qp_list, list)
- ipath_qp_rcv(dev, hdr, 1, data, tlen, p->qp);
- /*
- * Notify ipath_multicast_detach() if it is waiting for us
- * to finish.
- */
- if (atomic_dec_return(&mcast->refcount) <= 1)
- wake_up(&mcast->wait);
- } else {
- qp = ipath_lookup_qpn(&dev->qp_table, qp_num);
- if (qp) {
- dev->n_unicast_rcv++;
- ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data,
- tlen, qp);
- /*
- * Notify ipath_destroy_qp() if it is waiting
- * for us to finish.
- */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- } else
- dev->n_pkt_drops++;
- }
-
-bail:;
-}
-
-/**
- * ipath_ib_timer - verbs timer
- * @arg: the device pointer
- *
- * This is called from ipath_do_rcv_timer() at interrupt level to check for
- * QPs which need retransmits and to collect performance numbers.
- */
-static void ipath_ib_timer(struct ipath_ibdev *dev)
-{
- struct ipath_qp *resend = NULL;
- struct ipath_qp *rnr = NULL;
- struct list_head *last;
- struct ipath_qp *qp;
- unsigned long flags;
-
- if (dev == NULL)
- return;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- /* Start filling the next pending queue. */
- if (++dev->pending_index >= ARRAY_SIZE(dev->pending))
- dev->pending_index = 0;
- /* Save any requests still in the new queue, they have timed out. */
- last = &dev->pending[dev->pending_index];
- while (!list_empty(last)) {
- qp = list_entry(last->next, struct ipath_qp, timerwait);
- list_del_init(&qp->timerwait);
- qp->timer_next = resend;
- resend = qp;
- atomic_inc(&qp->refcount);
- }
- last = &dev->rnrwait;
- if (!list_empty(last)) {
- qp = list_entry(last->next, struct ipath_qp, timerwait);
- if (--qp->s_rnr_timeout == 0) {
- do {
- list_del_init(&qp->timerwait);
- qp->timer_next = rnr;
- rnr = qp;
- atomic_inc(&qp->refcount);
- if (list_empty(last))
- break;
- qp = list_entry(last->next, struct ipath_qp,
- timerwait);
- } while (qp->s_rnr_timeout == 0);
- }
- }
- /*
- * We should only be in the started state if pma_sample_start != 0
- */
- if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED &&
- --dev->pma_sample_start == 0) {
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
- ipath_snapshot_counters(dev->dd, &dev->ipath_sword,
- &dev->ipath_rword,
- &dev->ipath_spkts,
- &dev->ipath_rpkts,
- &dev->ipath_xmit_wait);
- }
- if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) {
- if (dev->pma_sample_interval == 0) {
- u64 ta, tb, tc, td, te;
-
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
- ipath_snapshot_counters(dev->dd, &ta, &tb,
- &tc, &td, &te);
-
- dev->ipath_sword = ta - dev->ipath_sword;
- dev->ipath_rword = tb - dev->ipath_rword;
- dev->ipath_spkts = tc - dev->ipath_spkts;
- dev->ipath_rpkts = td - dev->ipath_rpkts;
- dev->ipath_xmit_wait = te - dev->ipath_xmit_wait;
- } else {
- dev->pma_sample_interval--;
- }
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- /* XXX What if timer fires again while this is running? */
- while (resend != NULL) {
- qp = resend;
- resend = qp->timer_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (qp->s_last != qp->s_tail &&
- ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
- dev->n_timeouts++;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- }
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
- while (rnr != NULL) {
- qp = rnr;
- rnr = qp->timer_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
-}
-
-static void update_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- sge->vaddr += length;
- sge->length -= length;
- sge->sge_length -= length;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- return;
- sge->n = 0;
- }
- sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length = sge->mr->map[sge->m]->segs[sge->n].length;
- }
-}
-
-#ifdef __LITTLE_ENDIAN
-static inline u32 get_upper_bits(u32 data, u32 shift)
-{
- return data >> shift;
-}
-
-static inline u32 set_upper_bits(u32 data, u32 shift)
-{
- return data << shift;
-}
-
-static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
-{
- data <<= ((sizeof(u32) - n) * BITS_PER_BYTE);
- data >>= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
- return data;
-}
-#else
-static inline u32 get_upper_bits(u32 data, u32 shift)
-{
- return data << shift;
-}
-
-static inline u32 set_upper_bits(u32 data, u32 shift)
-{
- return data >> shift;
-}
-
-static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
-{
- data >>= ((sizeof(u32) - n) * BITS_PER_BYTE);
- data <<= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
- return data;
-}
-#endif
-
-static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
- u32 length, unsigned flush_wc)
-{
- u32 extra = 0;
- u32 data = 0;
- u32 last;
-
- while (1) {
- u32 len = ss->sge.length;
- u32 off;
-
- if (len > length)
- len = length;
- if (len > ss->sge.sge_length)
- len = ss->sge.sge_length;
- BUG_ON(len == 0);
- /* If the source address is not aligned, try to align it. */
- off = (unsigned long)ss->sge.vaddr & (sizeof(u32) - 1);
- if (off) {
- u32 *addr = (u32 *)((unsigned long)ss->sge.vaddr &
- ~(sizeof(u32) - 1));
- u32 v = get_upper_bits(*addr, off * BITS_PER_BYTE);
- u32 y;
-
- y = sizeof(u32) - off;
- if (len > y)
- len = y;
- if (len + extra >= sizeof(u32)) {
- data |= set_upper_bits(v, extra *
- BITS_PER_BYTE);
- len = sizeof(u32) - extra;
- if (len == length) {
- last = data;
- break;
- }
- __raw_writel(data, piobuf);
- piobuf++;
- extra = 0;
- data = 0;
- } else {
- /* Clear unused upper bytes */
- data |= clear_upper_bytes(v, len, extra);
- if (len == length) {
- last = data;
- break;
- }
- extra += len;
- }
- } else if (extra) {
- /* Source address is aligned. */
- u32 *addr = (u32 *) ss->sge.vaddr;
- int shift = extra * BITS_PER_BYTE;
- int ushift = 32 - shift;
- u32 l = len;
-
- while (l >= sizeof(u32)) {
- u32 v = *addr;
-
- data |= set_upper_bits(v, shift);
- __raw_writel(data, piobuf);
- data = get_upper_bits(v, ushift);
- piobuf++;
- addr++;
- l -= sizeof(u32);
- }
- /*
- * We still have 'extra' number of bytes leftover.
- */
- if (l) {
- u32 v = *addr;
-
- if (l + extra >= sizeof(u32)) {
- data |= set_upper_bits(v, shift);
- len -= l + extra - sizeof(u32);
- if (len == length) {
- last = data;
- break;
- }
- __raw_writel(data, piobuf);
- piobuf++;
- extra = 0;
- data = 0;
- } else {
- /* Clear unused upper bytes */
- data |= clear_upper_bytes(v, l,
- extra);
- if (len == length) {
- last = data;
- break;
- }
- extra += l;
- }
- } else if (len == length) {
- last = data;
- break;
- }
- } else if (len == length) {
- u32 w;
-
- /*
- * Need to round up for the last dword in the
- * packet.
- */
- w = (len + 3) >> 2;
- __iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
- piobuf += w - 1;
- last = ((u32 *) ss->sge.vaddr)[w - 1];
- break;
- } else {
- u32 w = len >> 2;
-
- __iowrite32_copy(piobuf, ss->sge.vaddr, w);
- piobuf += w;
-
- extra = len & (sizeof(u32) - 1);
- if (extra) {
- u32 v = ((u32 *) ss->sge.vaddr)[w];
-
- /* Clear unused upper bytes */
- data = clear_upper_bytes(v, extra, 0);
- }
- }
- update_sge(ss, len);
- length -= len;
- }
- /* Update address before sending packet. */
- update_sge(ss, length);
- if (flush_wc) {
- /* must flush early everything before trigger word */
- ipath_flush_wc();
- __raw_writel(last, piobuf);
- /* be sure trigger word is written */
- ipath_flush_wc();
- } else
- __raw_writel(last, piobuf);
-}
-
-/*
- * Convert IB rate to delay multiplier.
- */
-unsigned ipath_ib_rate_to_mult(enum ib_rate rate)
-{
- switch (rate) {
- case IB_RATE_2_5_GBPS: return 8;
- case IB_RATE_5_GBPS: return 4;
- case IB_RATE_10_GBPS: return 2;
- case IB_RATE_20_GBPS: return 1;
- default: return 0;
- }
-}
-
-/*
- * Convert delay multiplier to IB rate
- */
-static enum ib_rate ipath_mult_to_ib_rate(unsigned mult)
-{
- switch (mult) {
- case 8: return IB_RATE_2_5_GBPS;
- case 4: return IB_RATE_5_GBPS;
- case 2: return IB_RATE_10_GBPS;
- case 1: return IB_RATE_20_GBPS;
- default: return IB_RATE_PORT_CURRENT;
- }
-}
-
-static inline struct ipath_verbs_txreq *get_txreq(struct ipath_ibdev *dev)
-{
- struct ipath_verbs_txreq *tx = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (!list_empty(&dev->txreq_free)) {
- struct list_head *l = dev->txreq_free.next;
-
- list_del(l);
- tx = list_entry(l, struct ipath_verbs_txreq, txreq.list);
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
- return tx;
-}
-
-static inline void put_txreq(struct ipath_ibdev *dev,
- struct ipath_verbs_txreq *tx)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- list_add(&tx->txreq.list, &dev->txreq_free);
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-}
-
-static void sdma_complete(void *cookie, int status)
-{
- struct ipath_verbs_txreq *tx = cookie;
- struct ipath_qp *qp = tx->qp;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- unsigned long flags;
- enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
- IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
-
- if (atomic_dec_and_test(&qp->s_dma_busy)) {
- spin_lock_irqsave(&qp->s_lock, flags);
- if (tx->wqe)
- ipath_send_complete(qp, tx->wqe, ibs);
- if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
- qp->s_last != qp->s_head) ||
- (qp->s_flags & IPATH_S_WAIT_DMA))
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- wake_up(&qp->wait_dma);
- } else if (tx->wqe) {
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, tx->wqe, ibs);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- }
-
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
- kfree(tx->txreq.map_addr);
- put_txreq(dev, tx);
-
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-}
-
-static void decrement_dma_busy(struct ipath_qp *qp)
-{
- unsigned long flags;
-
- if (atomic_dec_and_test(&qp->s_dma_busy)) {
- spin_lock_irqsave(&qp->s_lock, flags);
- if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
- qp->s_last != qp->s_head) ||
- (qp->s_flags & IPATH_S_WAIT_DMA))
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- wake_up(&qp->wait_dma);
- }
-}
-
-/*
- * Compute the number of clock cycles of delay before sending the next packet.
- * The multipliers reflect the number of clocks for the fastest rate so
- * one tick at 4xDDR is 8 ticks at 1xSDR.
- * If the destination port will take longer to receive a packet than
- * the outgoing link can send it, we need to delay sending the next packet
- * by the difference in time it takes the receiver to receive and the sender
- * to send this packet.
- * Note that this delay is always correct for UC and RC but not always
- * optimal for UD. For UD, the destination HCA can be different for each
- * packet, in which case, we could send packets to a different destination
- * while "waiting" for the delay. The overhead for doing this without
- * HW support is more than just paying the cost of delaying some packets
- * unnecessarily.
- */
-static inline unsigned ipath_pkt_delay(u32 plen, u8 snd_mult, u8 rcv_mult)
-{
- return (rcv_mult > snd_mult) ?
- (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
-}
-
-static int ipath_verbs_send_dma(struct ipath_qp *qp,
- struct ipath_ib_header *hdr, u32 hdrwords,
- struct ipath_sge_state *ss, u32 len,
- u32 plen, u32 dwords)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_devdata *dd = dev->dd;
- struct ipath_verbs_txreq *tx;
- u32 *piobuf;
- u32 control;
- u32 ndesc;
- int ret;
-
- tx = qp->s_tx;
- if (tx) {
- qp->s_tx = NULL;
- /* resend previously constructed packet */
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx);
- if (ret) {
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- goto bail;
- }
-
- tx = get_txreq(dev);
- if (!tx) {
- ret = -EBUSY;
- goto bail;
- }
-
- /*
- * Get the saved delay count we computed for the previous packet
- * and save the delay count for this packet to be used next time
- * we get here.
- */
- control = qp->s_pkt_delay;
- qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
-
- tx->qp = qp;
- atomic_inc(&qp->refcount);
- tx->wqe = qp->s_wqe;
- tx->txreq.callback = sdma_complete;
- tx->txreq.callback_cookie = tx;
- tx->txreq.flags = IPATH_SDMA_TXREQ_F_HEADTOHOST |
- IPATH_SDMA_TXREQ_F_INTREQ | IPATH_SDMA_TXREQ_F_FREEDESC;
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_USELARGEBUF;
-
- /* VL15 packets bypass credit check */
- if ((be16_to_cpu(hdr->lrh[0]) >> 12) == 15) {
- control |= 1ULL << 31;
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_VL15;
- }
-
- if (len) {
- /*
- * Don't try to DMA if it takes more descriptors than
- * the queue holds.
- */
- ndesc = ipath_count_sge(ss, len);
- if (ndesc >= dd->ipath_sdma_descq_cnt)
- ndesc = 0;
- } else
- ndesc = 1;
- if (ndesc) {
- tx->hdr.pbc[0] = cpu_to_le32(plen);
- tx->hdr.pbc[1] = cpu_to_le32(control);
- memcpy(&tx->hdr.hdr, hdr, hdrwords << 2);
- tx->txreq.sg_count = ndesc;
- tx->map_len = (hdrwords + 2) << 2;
- tx->txreq.map_addr = &tx->hdr;
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, ss, dwords, tx);
- if (ret) {
- /* save ss and length in dwords */
- tx->ss = ss;
- tx->len = dwords;
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- goto bail;
- }
-
- /* Allocate a buffer and copy the header and payload to it. */
- tx->map_len = (plen + 1) << 2;
- piobuf = kmalloc(tx->map_len, GFP_ATOMIC);
- if (unlikely(piobuf == NULL)) {
- ret = -EBUSY;
- goto err_tx;
- }
- tx->txreq.map_addr = piobuf;
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_FREEBUF;
- tx->txreq.sg_count = 1;
-
- *piobuf++ = (__force u32) cpu_to_le32(plen);
- *piobuf++ = (__force u32) cpu_to_le32(control);
- memcpy(piobuf, hdr, hdrwords << 2);
- ipath_copy_from_sge(piobuf + hdrwords, ss, len);
-
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, NULL, 0, tx);
- /*
- * If we couldn't queue the DMA request, save the info
- * and try again later rather than destroying the
- * buffer and undoing the side effects of the copy.
- */
- if (ret) {
- tx->ss = NULL;
- tx->len = 0;
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- dev->n_unaligned++;
- goto bail;
-
-err_tx:
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- put_txreq(dev, tx);
-bail:
- return ret;
-}
-
-static int ipath_verbs_send_pio(struct ipath_qp *qp,
- struct ipath_ib_header *ibhdr, u32 hdrwords,
- struct ipath_sge_state *ss, u32 len,
- u32 plen, u32 dwords)
-{
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
- u32 *hdr = (u32 *) ibhdr;
- u32 __iomem *piobuf;
- unsigned flush_wc;
- u32 control;
- int ret;
- unsigned long flags;
-
- piobuf = ipath_getpiobuf(dd, plen, NULL);
- if (unlikely(piobuf == NULL)) {
- ret = -EBUSY;
- goto bail;
- }
-
- /*
- * Get the saved delay count we computed for the previous packet
- * and save the delay count for this packet to be used next time
- * we get here.
- */
- control = qp->s_pkt_delay;
- qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
-
- /* VL15 packets bypass credit check */
- if ((be16_to_cpu(ibhdr->lrh[0]) >> 12) == 15)
- control |= 1ULL << 31;
-
- /*
- * Write the length to the control qword plus any needed flags.
- * We have to flush after the PBC for correctness on some cpus
- * or WC buffer can be written out of order.
- */
- writeq(((u64) control << 32) | plen, piobuf);
- piobuf += 2;
-
- flush_wc = dd->ipath_flags & IPATH_PIO_FLUSH_WC;
- if (len == 0) {
- /*
- * If there is just the header portion, must flush before
- * writing last word of header for correctness, and after
- * the last header word (trigger word).
- */
- if (flush_wc) {
- ipath_flush_wc();
- __iowrite32_copy(piobuf, hdr, hdrwords - 1);
- ipath_flush_wc();
- __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords - 1);
- ipath_flush_wc();
- } else
- __iowrite32_copy(piobuf, hdr, hdrwords);
- goto done;
- }
-
- if (flush_wc)
- ipath_flush_wc();
- __iowrite32_copy(piobuf, hdr, hdrwords);
- piobuf += hdrwords;
-
- /* The common case is aligned and contained in one segment. */
- if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
- !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
- u32 *addr = (u32 *) ss->sge.vaddr;
-
- /* Update address before sending packet. */
- update_sge(ss, len);
- if (flush_wc) {
- __iowrite32_copy(piobuf, addr, dwords - 1);
- /* must flush early everything before trigger word */
- ipath_flush_wc();
- __raw_writel(addr[dwords - 1], piobuf + dwords - 1);
- /* be sure trigger word is written */
- ipath_flush_wc();
- } else
- __iowrite32_copy(piobuf, addr, dwords);
- goto done;
- }
- copy_io(piobuf, ss, len, flush_wc);
-done:
- if (qp->s_wqe) {
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_verbs_send - send a packet
- * @qp: the QP to send on
- * @hdr: the packet header
- * @hdrwords: the number of 32-bit words in the header
- * @ss: the SGE to send
- * @len: the length of the packet in bytes
- */
-int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
- u32 hdrwords, struct ipath_sge_state *ss, u32 len)
-{
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
- u32 plen;
- int ret;
- u32 dwords = (len + 3) >> 2;
-
- /*
- * Calculate the send buffer trigger address.
- * The +1 counts for the pbc control dword following the pbc length.
- */
- plen = hdrwords + dwords + 1;
-
- /*
- * VL15 packets (IB_QPT_SMI) will always use PIO, so we
- * can defer SDMA restart until link goes ACTIVE without
- * worrying about just how we got there.
- */
- if (qp->ibqp.qp_type == IB_QPT_SMI ||
- !(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
- plen, dwords);
- else
- ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
- plen, dwords);
-
- return ret;
-}
-
-int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
- u64 *rwords, u64 *spkts, u64 *rpkts,
- u64 *xmit_wait)
-{
- int ret;
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ret = -EINVAL;
- goto bail;
- }
- *swords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt);
- *rwords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
- *spkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
- *rpkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
- *xmit_wait = ipath_snap_cntr(dd, dd->ipath_cregs->cr_sendstallcnt);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_get_counters - get various chip counters
- * @dd: the infinipath device
- * @cntrs: counters are placed here
- *
- * Return the counters needed by recv_pma_get_portcounters().
- */
-int ipath_get_counters(struct ipath_devdata *dd,
- struct ipath_verbs_counters *cntrs)
-{
- struct ipath_cregs const *crp = dd->ipath_cregs;
- int ret;
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ret = -EINVAL;
- goto bail;
- }
- cntrs->symbol_error_counter =
- ipath_snap_cntr(dd, crp->cr_ibsymbolerrcnt);
- cntrs->link_error_recovery_counter =
- ipath_snap_cntr(dd, crp->cr_iblinkerrrecovcnt);
- /*
- * The link downed counter counts when the other side downs the
- * connection. We add in the number of times we downed the link
- * due to local link integrity errors to compensate.
- */
- cntrs->link_downed_counter =
- ipath_snap_cntr(dd, crp->cr_iblinkdowncnt);
- cntrs->port_rcv_errors =
- ipath_snap_cntr(dd, crp->cr_rxdroppktcnt) +
- ipath_snap_cntr(dd, crp->cr_rcvovflcnt) +
- ipath_snap_cntr(dd, crp->cr_portovflcnt) +
- ipath_snap_cntr(dd, crp->cr_err_rlencnt) +
- ipath_snap_cntr(dd, crp->cr_invalidrlencnt) +
- ipath_snap_cntr(dd, crp->cr_errlinkcnt) +
- ipath_snap_cntr(dd, crp->cr_erricrccnt) +
- ipath_snap_cntr(dd, crp->cr_errvcrccnt) +
- ipath_snap_cntr(dd, crp->cr_errlpcrccnt) +
- ipath_snap_cntr(dd, crp->cr_badformatcnt) +
- dd->ipath_rxfc_unsupvl_errs;
- if (crp->cr_rxotherlocalphyerrcnt)
- cntrs->port_rcv_errors +=
- ipath_snap_cntr(dd, crp->cr_rxotherlocalphyerrcnt);
- if (crp->cr_rxvlerrcnt)
- cntrs->port_rcv_errors +=
- ipath_snap_cntr(dd, crp->cr_rxvlerrcnt);
- cntrs->port_rcv_remphys_errors =
- ipath_snap_cntr(dd, crp->cr_rcvebpcnt);
- cntrs->port_xmit_discards = ipath_snap_cntr(dd, crp->cr_unsupvlcnt);
- cntrs->port_xmit_data = ipath_snap_cntr(dd, crp->cr_wordsendcnt);
- cntrs->port_rcv_data = ipath_snap_cntr(dd, crp->cr_wordrcvcnt);
- cntrs->port_xmit_packets = ipath_snap_cntr(dd, crp->cr_pktsendcnt);
- cntrs->port_rcv_packets = ipath_snap_cntr(dd, crp->cr_pktrcvcnt);
- cntrs->local_link_integrity_errors =
- crp->cr_locallinkintegrityerrcnt ?
- ipath_snap_cntr(dd, crp->cr_locallinkintegrityerrcnt) :
- ((dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
- dd->ipath_lli_errs : dd->ipath_lli_errors);
- cntrs->excessive_buffer_overrun_errors =
- crp->cr_excessbufferovflcnt ?
- ipath_snap_cntr(dd, crp->cr_excessbufferovflcnt) :
- dd->ipath_overrun_thresh_errs;
- cntrs->vl15_dropped = crp->cr_vl15droppedpktcnt ?
- ipath_snap_cntr(dd, crp->cr_vl15droppedpktcnt) : 0;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_ib_piobufavail - callback when a PIO buffer is available
- * @arg: the device pointer
- *
- * This is called from ipath_intr() at interrupt level when a PIO buffer is
- * available after ipath_verbs_send() returned an error that no buffers were
- * available. Return 1 if we consumed all the PIO buffers and we still have
- * QPs waiting for buffers (for now, just restart the send tasklet and
- * return zero).
- */
-int ipath_ib_piobufavail(struct ipath_ibdev *dev)
-{
- struct list_head *list;
- struct ipath_qp *qplist;
- struct ipath_qp *qp;
- unsigned long flags;
-
- if (dev == NULL)
- goto bail;
-
- list = &dev->piowait;
- qplist = NULL;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- while (!list_empty(list)) {
- qp = list_entry(list->next, struct ipath_qp, piowait);
- list_del_init(&qp->piowait);
- qp->pio_next = qplist;
- qplist = qp;
- atomic_inc(&qp->refcount);
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- while (qplist != NULL) {
- qp = qplist;
- qplist = qp->pio_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
-
-bail:
- return 0;
-}
-
-static int ipath_query_device(struct ib_device *ibdev, struct ib_device_attr *props,
- struct ib_udata *uhw)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
-
- if (uhw->inlen || uhw->outlen)
- return -EINVAL;
-
- memset(props, 0, sizeof(*props));
-
- props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
- IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
- IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
- IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
- props->page_size_cap = PAGE_SIZE;
- props->vendor_id =
- IPATH_SRC_OUI_1 << 16 | IPATH_SRC_OUI_2 << 8 | IPATH_SRC_OUI_3;
- props->vendor_part_id = dev->dd->ipath_deviceid;
- props->hw_ver = dev->dd->ipath_pcirev;
-
- props->sys_image_guid = dev->sys_image_guid;
-
- props->max_mr_size = ~0ull;
- props->max_qp = ib_ipath_max_qps;
- props->max_qp_wr = ib_ipath_max_qp_wrs;
- props->max_sge = ib_ipath_max_sges;
- props->max_sge_rd = ib_ipath_max_sges;
- props->max_cq = ib_ipath_max_cqs;
- props->max_ah = ib_ipath_max_ahs;
- props->max_cqe = ib_ipath_max_cqes;
- props->max_mr = dev->lk_table.max;
- props->max_fmr = dev->lk_table.max;
- props->max_map_per_fmr = 32767;
- props->max_pd = ib_ipath_max_pds;
- props->max_qp_rd_atom = IPATH_MAX_RDMA_ATOMIC;
- props->max_qp_init_rd_atom = 255;
- /* props->max_res_rd_atom */
- props->max_srq = ib_ipath_max_srqs;
- props->max_srq_wr = ib_ipath_max_srq_wrs;
- props->max_srq_sge = ib_ipath_max_srq_sges;
- /* props->local_ca_ack_delay */
- props->atomic_cap = IB_ATOMIC_GLOB;
- props->max_pkeys = ipath_get_npkeys(dev->dd);
- props->max_mcast_grp = ib_ipath_max_mcast_grps;
- props->max_mcast_qp_attach = ib_ipath_max_mcast_qp_attached;
- props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
- props->max_mcast_grp;
-
- return 0;
-}
-
-const u8 ipath_cvt_physportstate[32] = {
- [INFINIPATH_IBCS_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
- [INFINIPATH_IBCS_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
- [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
- [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
- [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
- [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
- [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
-};
-
-u32 ipath_get_cr_errpkey(struct ipath_devdata *dd)
-{
- return ipath_read_creg32(dd, dd->ipath_cregs->cr_errpkey);
-}
-
-static int ipath_query_port(struct ib_device *ibdev,
- u8 port, struct ib_port_attr *props)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_devdata *dd = dev->dd;
- enum ib_mtu mtu;
- u16 lid = dd->ipath_lid;
- u64 ibcstat;
-
- memset(props, 0, sizeof(*props));
- props->lid = lid ? lid : be16_to_cpu(IB_LID_PERMISSIVE);
- props->lmc = dd->ipath_lmc;
- props->sm_lid = dev->sm_lid;
- props->sm_sl = dev->sm_sl;
- ibcstat = dd->ipath_lastibcstat;
- /* map LinkState to IB portinfo values. */
- props->state = ipath_ib_linkstate(dd, ibcstat) + 1;
-
- /* See phys_state_show() */
- props->phys_state = /* MEA: assumes shift == 0 */
- ipath_cvt_physportstate[dd->ipath_lastibcstat &
- dd->ibcs_lts_mask];
- props->port_cap_flags = dev->port_cap_flags;
- props->gid_tbl_len = 1;
- props->max_msg_sz = 0x80000000;
- props->pkey_tbl_len = ipath_get_npkeys(dd);
- props->bad_pkey_cntr = ipath_get_cr_errpkey(dd) -
- dev->z_pkey_violations;
- props->qkey_viol_cntr = dev->qkey_violations;
- props->active_width = dd->ipath_link_width_active;
- /* See rate_show() */
- props->active_speed = dd->ipath_link_speed_active;
- props->max_vl_num = 1; /* VLCap = VL0 */
- props->init_type_reply = 0;
-
- props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
- switch (dd->ipath_ibmtu) {
- case 4096:
- mtu = IB_MTU_4096;
- break;
- case 2048:
- mtu = IB_MTU_2048;
- break;
- case 1024:
- mtu = IB_MTU_1024;
- break;
- case 512:
- mtu = IB_MTU_512;
- break;
- case 256:
- mtu = IB_MTU_256;
- break;
- default:
- mtu = IB_MTU_2048;
- }
- props->active_mtu = mtu;
- props->subnet_timeout = dev->subnet_timeout;
-
- return 0;
-}
-
-static int ipath_modify_device(struct ib_device *device,
- int device_modify_mask,
- struct ib_device_modify *device_modify)
-{
- int ret;
-
- if (device_modify_mask & ~(IB_DEVICE_MODIFY_SYS_IMAGE_GUID |
- IB_DEVICE_MODIFY_NODE_DESC)) {
- ret = -EOPNOTSUPP;
- goto bail;
- }
-
- if (device_modify_mask & IB_DEVICE_MODIFY_NODE_DESC)
- memcpy(device->node_desc, device_modify->node_desc, 64);
-
- if (device_modify_mask & IB_DEVICE_MODIFY_SYS_IMAGE_GUID)
- to_idev(device)->sys_image_guid =
- cpu_to_be64(device_modify->sys_image_guid);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_modify_port(struct ib_device *ibdev,
- u8 port, int port_modify_mask,
- struct ib_port_modify *props)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
-
- dev->port_cap_flags |= props->set_port_cap_mask;
- dev->port_cap_flags &= ~props->clr_port_cap_mask;
- if (port_modify_mask & IB_PORT_SHUTDOWN)
- ipath_set_linkstate(dev->dd, IPATH_IB_LINKDOWN);
- if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR)
- dev->qkey_violations = 0;
- return 0;
-}
-
-static int ipath_query_gid(struct ib_device *ibdev, u8 port,
- int index, union ib_gid *gid)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- if (index >= 1) {
- ret = -EINVAL;
- goto bail;
- }
- gid->global.subnet_prefix = dev->gid_prefix;
- gid->global.interface_id = dev->dd->ipath_guid;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static struct ib_pd *ipath_alloc_pd(struct ib_device *ibdev,
- struct ib_ucontext *context,
- struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_pd *pd;
- struct ib_pd *ret;
-
- /*
- * This is actually totally arbitrary. Some correctness tests
- * assume there's a maximum number of PDs that can be allocated.
- * We don't actually have this limit, but we fail the test if
- * we allow allocations of more than we report for this value.
- */
-
- pd = kmalloc(sizeof *pd, GFP_KERNEL);
- if (!pd) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- spin_lock(&dev->n_pds_lock);
- if (dev->n_pds_allocated == ib_ipath_max_pds) {
- spin_unlock(&dev->n_pds_lock);
- kfree(pd);
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- dev->n_pds_allocated++;
- spin_unlock(&dev->n_pds_lock);
-
- /* ib_alloc_pd() will initialize pd->ibpd. */
- pd->user = udata != NULL;
-
- ret = &pd->ibpd;
-
-bail:
- return ret;
-}
-
-static int ipath_dealloc_pd(struct ib_pd *ibpd)
-{
- struct ipath_pd *pd = to_ipd(ibpd);
- struct ipath_ibdev *dev = to_idev(ibpd->device);
-
- spin_lock(&dev->n_pds_lock);
- dev->n_pds_allocated--;
- spin_unlock(&dev->n_pds_lock);
-
- kfree(pd);
-
- return 0;
-}
-
-/**
- * ipath_create_ah - create an address handle
- * @pd: the protection domain
- * @ah_attr: the attributes of the AH
- *
- * This may be called from interrupt context.
- */
-static struct ib_ah *ipath_create_ah(struct ib_pd *pd,
- struct ib_ah_attr *ah_attr)
-{
- struct ipath_ah *ah;
- struct ib_ah *ret;
- struct ipath_ibdev *dev = to_idev(pd->device);
- unsigned long flags;
-
- /* A multicast address requires a GRH (see ch. 8.4.1). */
- if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPATH_PERMISSIVE_LID &&
- !(ah_attr->ah_flags & IB_AH_GRH)) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (ah_attr->dlid == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (ah_attr->port_num < 1 ||
- ah_attr->port_num > pd->device->phys_port_cnt) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- ah = kmalloc(sizeof *ah, GFP_ATOMIC);
- if (!ah) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- spin_lock_irqsave(&dev->n_ahs_lock, flags);
- if (dev->n_ahs_allocated == ib_ipath_max_ahs) {
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
- kfree(ah);
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- dev->n_ahs_allocated++;
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
-
- /* ib_create_ah() will initialize ah->ibah. */
- ah->attr = *ah_attr;
- ah->attr.static_rate = ipath_ib_rate_to_mult(ah_attr->static_rate);
-
- ret = &ah->ibah;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_destroy_ah - destroy an address handle
- * @ibah: the AH to destroy
- *
- * This may be called from interrupt context.
- */
-static int ipath_destroy_ah(struct ib_ah *ibah)
-{
- struct ipath_ibdev *dev = to_idev(ibah->device);
- struct ipath_ah *ah = to_iah(ibah);
- unsigned long flags;
-
- spin_lock_irqsave(&dev->n_ahs_lock, flags);
- dev->n_ahs_allocated--;
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
-
- kfree(ah);
-
- return 0;
-}
-
-static int ipath_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr)
-{
- struct ipath_ah *ah = to_iah(ibah);
-
- *ah_attr = ah->attr;
- ah_attr->static_rate = ipath_mult_to_ib_rate(ah->attr.static_rate);
-
- return 0;
-}
-
-/**
- * ipath_get_npkeys - return the size of the PKEY table for port 0
- * @dd: the infinipath device
- */
-unsigned ipath_get_npkeys(struct ipath_devdata *dd)
-{
- return ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys);
-}
-
-/**
- * ipath_get_pkey - return the indexed PKEY from the port PKEY table
- * @dd: the infinipath device
- * @index: the PKEY index
- */
-unsigned ipath_get_pkey(struct ipath_devdata *dd, unsigned index)
-{
- unsigned ret;
-
- /* always a kernel port, no locking needed */
- if (index >= ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys))
- ret = 0;
- else
- ret = dd->ipath_pd[0]->port_pkeys[index];
-
- return ret;
-}
-
-static int ipath_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
- u16 *pkey)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- if (index >= ipath_get_npkeys(dev->dd)) {
- ret = -EINVAL;
- goto bail;
- }
-
- *pkey = ipath_get_pkey(dev->dd, index);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_alloc_ucontext - allocate a ucontest
- * @ibdev: the infiniband device
- * @udata: not used by the InfiniPath driver
- */
-
-static struct ib_ucontext *ipath_alloc_ucontext(struct ib_device *ibdev,
- struct ib_udata *udata)
-{
- struct ipath_ucontext *context;
- struct ib_ucontext *ret;
-
- context = kmalloc(sizeof *context, GFP_KERNEL);
- if (!context) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- ret = &context->ibucontext;
-
-bail:
- return ret;
-}
-
-static int ipath_dealloc_ucontext(struct ib_ucontext *context)
-{
- kfree(to_iucontext(context));
- return 0;
-}
-
-static int ipath_verbs_register_sysfs(struct ib_device *dev);
-
-static void __verbs_timer(unsigned long arg)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) arg;
-
- /* Handle verbs layer timeouts. */
- ipath_ib_timer(dd->verbs_dev);
-
- mod_timer(&dd->verbs_timer, jiffies + 1);
-}
-
-static int enable_timer(struct ipath_devdata *dd)
-{
- /*
- * Early chips had a design flaw where the chip and kernel idea
- * of the tail register don't always agree, and therefore we won't
- * get an interrupt on the next packet received.
- * If the board supports per packet receive interrupts, use it.
- * Otherwise, the timer function periodically checks for packets
- * to cover this case.
- * Either way, the timer is needed for verbs layer related
- * processing.
- */
- if (dd->ipath_flags & IPATH_GPIO_INTR) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_debugportselect,
- 0x2074076542310ULL);
- /* Enable GPIO bit 2 interrupt */
- dd->ipath_gpio_mask |= (u64) (1 << IPATH_GPIO_PORT0_BIT);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
-
- setup_timer(&dd->verbs_timer, __verbs_timer, (unsigned long)dd);
-
- dd->verbs_timer.expires = jiffies + 1;
- add_timer(&dd->verbs_timer);
-
- return 0;
-}
-
-static int disable_timer(struct ipath_devdata *dd)
-{
- /* Disable GPIO bit 2 interrupt */
- if (dd->ipath_flags & IPATH_GPIO_INTR) {
- /* Disable GPIO bit 2 interrupt */
- dd->ipath_gpio_mask &= ~((u64) (1 << IPATH_GPIO_PORT0_BIT));
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- /*
- * We might want to undo changes to debugportselect,
- * but how?
- */
- }
-
- del_timer_sync(&dd->verbs_timer);
-
- return 0;
-}
-
-static int ipath_port_immutable(struct ib_device *ibdev, u8 port_num,
- struct ib_port_immutable *immutable)
-{
- struct ib_port_attr attr;
- int err;
-
- err = ipath_query_port(ibdev, port_num, &attr);
- if (err)
- return err;
-
- immutable->pkey_tbl_len = attr.pkey_tbl_len;
- immutable->gid_tbl_len = attr.gid_tbl_len;
- immutable->core_cap_flags = RDMA_CORE_PORT_IBA_IB;
- immutable->max_mad_size = IB_MGMT_MAD_SIZE;
-
- return 0;
-}
-
-/**
- * ipath_register_ib_device - register our device with the infiniband core
- * @dd: the device data structure
- * Return the allocated ipath_ibdev pointer or NULL on error.
- */
-int ipath_register_ib_device(struct ipath_devdata *dd)
-{
- struct ipath_verbs_counters cntrs;
- struct ipath_ibdev *idev;
- struct ib_device *dev;
- struct ipath_verbs_txreq *tx;
- unsigned i;
- int ret;
-
- idev = (struct ipath_ibdev *)ib_alloc_device(sizeof *idev);
- if (idev == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- dev = &idev->ibdev;
-
- if (dd->ipath_sdma_descq_cnt) {
- tx = kmalloc_array(dd->ipath_sdma_descq_cnt, sizeof *tx,
- GFP_KERNEL);
- if (tx == NULL) {
- ret = -ENOMEM;
- goto err_tx;
- }
- } else
- tx = NULL;
- idev->txreq_bufs = tx;
-
- /* Only need to initialize non-zero fields. */
- spin_lock_init(&idev->n_pds_lock);
- spin_lock_init(&idev->n_ahs_lock);
- spin_lock_init(&idev->n_cqs_lock);
- spin_lock_init(&idev->n_qps_lock);
- spin_lock_init(&idev->n_srqs_lock);
- spin_lock_init(&idev->n_mcast_grps_lock);
-
- spin_lock_init(&idev->qp_table.lock);
- spin_lock_init(&idev->lk_table.lock);
- idev->sm_lid = be16_to_cpu(IB_LID_PERMISSIVE);
- /* Set the prefix to the default value (see ch. 4.1.1) */
- idev->gid_prefix = cpu_to_be64(0xfe80000000000000ULL);
-
- ret = ipath_init_qp_table(idev, ib_ipath_qp_table_size);
- if (ret)
- goto err_qp;
-
- /*
- * The top ib_ipath_lkey_table_size bits are used to index the
- * table. The lower 8 bits can be owned by the user (copied from
- * the LKEY). The remaining bits act as a generation number or tag.
- */
- idev->lk_table.max = 1 << ib_ipath_lkey_table_size;
- idev->lk_table.table = kcalloc(idev->lk_table.max,
- sizeof(*idev->lk_table.table),
- GFP_KERNEL);
- if (idev->lk_table.table == NULL) {
- ret = -ENOMEM;
- goto err_lk;
- }
- INIT_LIST_HEAD(&idev->pending_mmaps);
- spin_lock_init(&idev->pending_lock);
- idev->mmap_offset = PAGE_SIZE;
- spin_lock_init(&idev->mmap_offset_lock);
- INIT_LIST_HEAD(&idev->pending[0]);
- INIT_LIST_HEAD(&idev->pending[1]);
- INIT_LIST_HEAD(&idev->pending[2]);
- INIT_LIST_HEAD(&idev->piowait);
- INIT_LIST_HEAD(&idev->rnrwait);
- INIT_LIST_HEAD(&idev->txreq_free);
- idev->pending_index = 0;
- idev->port_cap_flags =
- IB_PORT_SYS_IMAGE_GUID_SUP | IB_PORT_CLIENT_REG_SUP;
- if (dd->ipath_flags & IPATH_HAS_LINK_LATENCY)
- idev->port_cap_flags |= IB_PORT_LINK_LATENCY_SUP;
- idev->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA;
- idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA;
- idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS;
- idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS;
- idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT;
-
- /* Snapshot current HW counters to "clear" them. */
- ipath_get_counters(dd, &cntrs);
- idev->z_symbol_error_counter = cntrs.symbol_error_counter;
- idev->z_link_error_recovery_counter =
- cntrs.link_error_recovery_counter;
- idev->z_link_downed_counter = cntrs.link_downed_counter;
- idev->z_port_rcv_errors = cntrs.port_rcv_errors;
- idev->z_port_rcv_remphys_errors =
- cntrs.port_rcv_remphys_errors;
- idev->z_port_xmit_discards = cntrs.port_xmit_discards;
- idev->z_port_xmit_data = cntrs.port_xmit_data;
- idev->z_port_rcv_data = cntrs.port_rcv_data;
- idev->z_port_xmit_packets = cntrs.port_xmit_packets;
- idev->z_port_rcv_packets = cntrs.port_rcv_packets;
- idev->z_local_link_integrity_errors =
- cntrs.local_link_integrity_errors;
- idev->z_excessive_buffer_overrun_errors =
- cntrs.excessive_buffer_overrun_errors;
- idev->z_vl15_dropped = cntrs.vl15_dropped;
-
- for (i = 0; i < dd->ipath_sdma_descq_cnt; i++, tx++)
- list_add(&tx->txreq.list, &idev->txreq_free);
-
- /*
- * The system image GUID is supposed to be the same for all
- * IB HCAs in a single system but since there can be other
- * device types in the system, we can't be sure this is unique.
- */
- if (!sys_image_guid)
- sys_image_guid = dd->ipath_guid;
- idev->sys_image_guid = sys_image_guid;
- idev->ib_unit = dd->ipath_unit;
- idev->dd = dd;
-
- strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
- dev->owner = THIS_MODULE;
- dev->node_guid = dd->ipath_guid;
- dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
- dev->uverbs_cmd_mask =
- (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
- (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
- (1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
- (1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
- (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
- (1ull << IB_USER_VERBS_CMD_CREATE_AH) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_AH) |
- (1ull << IB_USER_VERBS_CMD_QUERY_AH) |
- (1ull << IB_USER_VERBS_CMD_REG_MR) |
- (1ull << IB_USER_VERBS_CMD_DEREG_MR) |
- (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
- (1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
- (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
- (1ull << IB_USER_VERBS_CMD_POLL_CQ) |
- (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) |
- (1ull << IB_USER_VERBS_CMD_CREATE_QP) |
- (1ull << IB_USER_VERBS_CMD_QUERY_QP) |
- (1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
- (1ull << IB_USER_VERBS_CMD_POST_SEND) |
- (1ull << IB_USER_VERBS_CMD_POST_RECV) |
- (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
- (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_POST_SRQ_RECV);
- dev->node_type = RDMA_NODE_IB_CA;
- dev->phys_port_cnt = 1;
- dev->num_comp_vectors = 1;
- dev->dma_device = &dd->pcidev->dev;
- dev->query_device = ipath_query_device;
- dev->modify_device = ipath_modify_device;
- dev->query_port = ipath_query_port;
- dev->modify_port = ipath_modify_port;
- dev->query_pkey = ipath_query_pkey;
- dev->query_gid = ipath_query_gid;
- dev->alloc_ucontext = ipath_alloc_ucontext;
- dev->dealloc_ucontext = ipath_dealloc_ucontext;
- dev->alloc_pd = ipath_alloc_pd;
- dev->dealloc_pd = ipath_dealloc_pd;
- dev->create_ah = ipath_create_ah;
- dev->destroy_ah = ipath_destroy_ah;
- dev->query_ah = ipath_query_ah;
- dev->create_srq = ipath_create_srq;
- dev->modify_srq = ipath_modify_srq;
- dev->query_srq = ipath_query_srq;
- dev->destroy_srq = ipath_destroy_srq;
- dev->create_qp = ipath_create_qp;
- dev->modify_qp = ipath_modify_qp;
- dev->query_qp = ipath_query_qp;
- dev->destroy_qp = ipath_destroy_qp;
- dev->post_send = ipath_post_send;
- dev->post_recv = ipath_post_receive;
- dev->post_srq_recv = ipath_post_srq_receive;
- dev->create_cq = ipath_create_cq;
- dev->destroy_cq = ipath_destroy_cq;
- dev->resize_cq = ipath_resize_cq;
- dev->poll_cq = ipath_poll_cq;
- dev->req_notify_cq = ipath_req_notify_cq;
- dev->get_dma_mr = ipath_get_dma_mr;
- dev->reg_user_mr = ipath_reg_user_mr;
- dev->dereg_mr = ipath_dereg_mr;
- dev->alloc_fmr = ipath_alloc_fmr;
- dev->map_phys_fmr = ipath_map_phys_fmr;
- dev->unmap_fmr = ipath_unmap_fmr;
- dev->dealloc_fmr = ipath_dealloc_fmr;
- dev->attach_mcast = ipath_multicast_attach;
- dev->detach_mcast = ipath_multicast_detach;
- dev->process_mad = ipath_process_mad;
- dev->mmap = ipath_mmap;
- dev->dma_ops = &ipath_dma_mapping_ops;
- dev->get_port_immutable = ipath_port_immutable;
-
- snprintf(dev->node_desc, sizeof(dev->node_desc),
- IPATH_IDSTR " %s", init_utsname()->nodename);
-
- ret = ib_register_device(dev, NULL);
- if (ret)
- goto err_reg;
-
- ret = ipath_verbs_register_sysfs(dev);
- if (ret)
- goto err_class;
-
- enable_timer(dd);
-
- goto bail;
-
-err_class:
- ib_unregister_device(dev);
-err_reg:
- kfree(idev->lk_table.table);
-err_lk:
- kfree(idev->qp_table.table);
-err_qp:
- kfree(idev->txreq_bufs);
-err_tx:
- ib_dealloc_device(dev);
- ipath_dev_err(dd, "cannot register verbs: %d!\n", -ret);
- idev = NULL;
-
-bail:
- dd->verbs_dev = idev;
- return ret;
-}
-
-void ipath_unregister_ib_device(struct ipath_ibdev *dev)
-{
- struct ib_device *ibdev = &dev->ibdev;
- u32 qps_inuse;
-
- ib_unregister_device(ibdev);
-
- disable_timer(dev->dd);
-
- if (!list_empty(&dev->pending[0]) ||
- !list_empty(&dev->pending[1]) ||
- !list_empty(&dev->pending[2]))
- ipath_dev_err(dev->dd, "pending list not empty!\n");
- if (!list_empty(&dev->piowait))
- ipath_dev_err(dev->dd, "piowait list not empty!\n");
- if (!list_empty(&dev->rnrwait))
- ipath_dev_err(dev->dd, "rnrwait list not empty!\n");
- if (!ipath_mcast_tree_empty())
- ipath_dev_err(dev->dd, "multicast table memory leak!\n");
- /*
- * Note that ipath_unregister_ib_device() can be called before all
- * the QPs are destroyed!
- */
- qps_inuse = ipath_free_all_qps(&dev->qp_table);
- if (qps_inuse)
- ipath_dev_err(dev->dd, "QP memory leak! %u still in use\n",
- qps_inuse);
- kfree(dev->qp_table.table);
- kfree(dev->lk_table.table);
- kfree(dev->txreq_bufs);
- ib_dealloc_device(ibdev);
-}
-
-static ssize_t show_rev(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
-
- return sprintf(buf, "%x\n", dev->dd->ipath_pcirev);
-}
-
-static ssize_t show_hca(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
- int ret;
-
- ret = dev->dd->ipath_f_get_boardname(dev->dd, buf, 128);
- if (ret < 0)
- goto bail;
- strcat(buf, "\n");
- ret = strlen(buf);
-
-bail:
- return ret;
-}
-
-static ssize_t show_stats(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
- int i;
- int len;
-
- len = sprintf(buf,
- "RC resends %d\n"
- "RC no QACK %d\n"
- "RC ACKs %d\n"
- "RC SEQ NAKs %d\n"
- "RC RDMA seq %d\n"
- "RC RNR NAKs %d\n"
- "RC OTH NAKs %d\n"
- "RC timeouts %d\n"
- "RC RDMA dup %d\n"
- "piobuf wait %d\n"
- "unaligned %d\n"
- "PKT drops %d\n"
- "WQE errs %d\n",
- dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
- dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
- dev->n_other_naks, dev->n_timeouts,
- dev->n_rdma_dup_busy, dev->n_piowait, dev->n_unaligned,
- dev->n_pkt_drops, dev->n_wqe_errs);
- for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
- const struct ipath_opcode_stats *si = &dev->opstats[i];
-
- if (!si->n_packets && !si->n_bytes)
- continue;
- len += sprintf(buf + len, "%02x %llu/%llu\n", i,
- (unsigned long long) si->n_packets,
- (unsigned long long) si->n_bytes);
- }
- return len;
-}
-
-static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
-static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
-static DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL);
-static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
-
-static struct device_attribute *ipath_class_attributes[] = {
- &dev_attr_hw_rev,
- &dev_attr_hca_type,
- &dev_attr_board_id,
- &dev_attr_stats
-};
-
-static int ipath_verbs_register_sysfs(struct ib_device *dev)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i) {
- ret = device_create_file(&dev->dev,
- ipath_class_attributes[i]);
- if (ret)
- goto bail;
- }
- return 0;
-bail:
- for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
- device_remove_file(&dev->dev, ipath_class_attributes[i]);
- return ret;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_verbs.h b/drivers/staging/rdma/ipath/ipath_verbs.h
deleted file mode 100644
index 6c70a89..0000000
--- a/drivers/staging/rdma/ipath/ipath_verbs.h
+++ /dev/null
@@ -1,941 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef IPATH_VERBS_H
-#define IPATH_VERBS_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/kref.h>
-#include <rdma/ib_pack.h>
-#include <rdma/ib_user_verbs.h>
-
-#include "ipath_kernel.h"
-
-#define IPATH_MAX_RDMA_ATOMIC 4
-
-#define QPN_MAX (1 << 24)
-#define QPNMAP_ENTRIES (QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
-
-/*
- * Increment this value if any changes that break userspace ABI
- * compatibility are made.
- */
-#define IPATH_UVERBS_ABI_VERSION 2
-
-/*
- * Define an ib_cq_notify value that is not valid so we know when CQ
- * notifications are armed.
- */
-#define IB_CQ_NONE (IB_CQ_NEXT_COMP + 1)
-
-/* AETH NAK opcode values */
-#define IB_RNR_NAK 0x20
-#define IB_NAK_PSN_ERROR 0x60
-#define IB_NAK_INVALID_REQUEST 0x61
-#define IB_NAK_REMOTE_ACCESS_ERROR 0x62
-#define IB_NAK_REMOTE_OPERATIONAL_ERROR 0x63
-#define IB_NAK_INVALID_RD_REQUEST 0x64
-
-/* Flags for checking QP state (see ib_ipath_state_ops[]) */
-#define IPATH_POST_SEND_OK 0x01
-#define IPATH_POST_RECV_OK 0x02
-#define IPATH_PROCESS_RECV_OK 0x04
-#define IPATH_PROCESS_SEND_OK 0x08
-#define IPATH_PROCESS_NEXT_SEND_OK 0x10
-#define IPATH_FLUSH_SEND 0x20
-#define IPATH_FLUSH_RECV 0x40
-#define IPATH_PROCESS_OR_FLUSH_SEND \
- (IPATH_PROCESS_SEND_OK | IPATH_FLUSH_SEND)
-
-/* IB Performance Manager status values */
-#define IB_PMA_SAMPLE_STATUS_DONE 0x00
-#define IB_PMA_SAMPLE_STATUS_STARTED 0x01
-#define IB_PMA_SAMPLE_STATUS_RUNNING 0x02
-
-/* Mandatory IB performance counter select values. */
-#define IB_PMA_PORT_XMIT_DATA cpu_to_be16(0x0001)
-#define IB_PMA_PORT_RCV_DATA cpu_to_be16(0x0002)
-#define IB_PMA_PORT_XMIT_PKTS cpu_to_be16(0x0003)
-#define IB_PMA_PORT_RCV_PKTS cpu_to_be16(0x0004)
-#define IB_PMA_PORT_XMIT_WAIT cpu_to_be16(0x0005)
-
-struct ib_reth {
- __be64 vaddr;
- __be32 rkey;
- __be32 length;
-} __attribute__ ((packed));
-
-struct ib_atomic_eth {
- __be32 vaddr[2]; /* unaligned so access as 2 32-bit words */
- __be32 rkey;
- __be64 swap_data;
- __be64 compare_data;
-} __attribute__ ((packed));
-
-struct ipath_other_headers {
- __be32 bth[3];
- union {
- struct {
- __be32 deth[2];
- __be32 imm_data;
- } ud;
- struct {
- struct ib_reth reth;
- __be32 imm_data;
- } rc;
- struct {
- __be32 aeth;
- __be32 atomic_ack_eth[2];
- } at;
- __be32 imm_data;
- __be32 aeth;
- struct ib_atomic_eth atomic_eth;
- } u;
-} __attribute__ ((packed));
-
-/*
- * Note that UD packets with a GRH header are 8+40+12+8 = 68 bytes
- * long (72 w/ imm_data). Only the first 56 bytes of the IB header
- * will be in the eager header buffer. The remaining 12 or 16 bytes
- * are in the data buffer.
- */
-struct ipath_ib_header {
- __be16 lrh[4];
- union {
- struct {
- struct ib_grh grh;
- struct ipath_other_headers oth;
- } l;
- struct ipath_other_headers oth;
- } u;
-} __attribute__ ((packed));
-
-struct ipath_pio_header {
- __le32 pbc[2];
- struct ipath_ib_header hdr;
-} __attribute__ ((packed));
-
-/*
- * There is one struct ipath_mcast for each multicast GID.
- * All attached QPs are then stored as a list of
- * struct ipath_mcast_qp.
- */
-struct ipath_mcast_qp {
- struct list_head list;
- struct ipath_qp *qp;
-};
-
-struct ipath_mcast {
- struct rb_node rb_node;
- union ib_gid mgid;
- struct list_head qp_list;
- wait_queue_head_t wait;
- atomic_t refcount;
- int n_attached;
-};
-
-/* Protection domain */
-struct ipath_pd {
- struct ib_pd ibpd;
- int user; /* non-zero if created from user space */
-};
-
-/* Address Handle */
-struct ipath_ah {
- struct ib_ah ibah;
- struct ib_ah_attr attr;
-};
-
-/*
- * This structure is used by ipath_mmap() to validate an offset
- * when an mmap() request is made. The vm_area_struct then uses
- * this as its vm_private_data.
- */
-struct ipath_mmap_info {
- struct list_head pending_mmaps;
- struct ib_ucontext *context;
- void *obj;
- __u64 offset;
- struct kref ref;
- unsigned size;
-};
-
-/*
- * This structure is used to contain the head pointer, tail pointer,
- * and completion queue entries as a single memory allocation so
- * it can be mmap'ed into user space.
- */
-struct ipath_cq_wc {
- u32 head; /* index of next entry to fill */
- u32 tail; /* index of next ib_poll_cq() entry */
- union {
- /* these are actually size ibcq.cqe + 1 */
- struct ib_uverbs_wc uqueue[0];
- struct ib_wc kqueue[0];
- };
-};
-
-/*
- * The completion queue structure.
- */
-struct ipath_cq {
- struct ib_cq ibcq;
- struct tasklet_struct comptask;
- spinlock_t lock;
- u8 notify;
- u8 triggered;
- struct ipath_cq_wc *queue;
- struct ipath_mmap_info *ip;
-};
-
-/*
- * A segment is a linear region of low physical memory.
- * XXX Maybe we should use phys addr here and kmap()/kunmap().
- * Used by the verbs layer.
- */
-struct ipath_seg {
- void *vaddr;
- size_t length;
-};
-
-/* The number of ipath_segs that fit in a page. */
-#define IPATH_SEGSZ (PAGE_SIZE / sizeof (struct ipath_seg))
-
-struct ipath_segarray {
- struct ipath_seg segs[IPATH_SEGSZ];
-};
-
-struct ipath_mregion {
- struct ib_pd *pd; /* shares refcnt of ibmr.pd */
- u64 user_base; /* User's address for this region */
- u64 iova; /* IB start address of this region */
- size_t length;
- u32 lkey;
- u32 offset; /* offset (bytes) to start of region */
- int access_flags;
- u32 max_segs; /* number of ipath_segs in all the arrays */
- u32 mapsz; /* size of the map array */
- struct ipath_segarray *map[0]; /* the segments */
-};
-
-/*
- * These keep track of the copy progress within a memory region.
- * Used by the verbs layer.
- */
-struct ipath_sge {
- struct ipath_mregion *mr;
- void *vaddr; /* kernel virtual address of segment */
- u32 sge_length; /* length of the SGE */
- u32 length; /* remaining length of the segment */
- u16 m; /* current index: mr->map[m] */
- u16 n; /* current index: mr->map[m]->segs[n] */
-};
-
-/* Memory region */
-struct ipath_mr {
- struct ib_mr ibmr;
- struct ib_umem *umem;
- struct ipath_mregion mr; /* must be last */
-};
-
-/*
- * Send work request queue entry.
- * The size of the sg_list is determined when the QP is created and stored
- * in qp->s_max_sge.
- */
-struct ipath_swqe {
- union {
- struct ib_send_wr wr; /* don't use wr.sg_list */
- struct ib_ud_wr ud_wr;
- struct ib_rdma_wr rdma_wr;
- struct ib_atomic_wr atomic_wr;
- };
-
- u32 psn; /* first packet sequence number */
- u32 lpsn; /* last packet sequence number */
- u32 ssn; /* send sequence number */
- u32 length; /* total length of data in sg_list */
- struct ipath_sge sg_list[0];
-};
-
-/*
- * Receive work request queue entry.
- * The size of the sg_list is determined when the QP (or SRQ) is created
- * and stored in qp->r_rq.max_sge (or srq->rq.max_sge).
- */
-struct ipath_rwqe {
- u64 wr_id;
- u8 num_sge;
- struct ib_sge sg_list[0];
-};
-
-/*
- * This structure is used to contain the head pointer, tail pointer,
- * and receive work queue entries as a single memory allocation so
- * it can be mmap'ed into user space.
- * Note that the wq array elements are variable size so you can't
- * just index into the array to get the N'th element;
- * use get_rwqe_ptr() instead.
- */
-struct ipath_rwq {
- u32 head; /* new work requests posted to the head */
- u32 tail; /* receives pull requests from here. */
- struct ipath_rwqe wq[0];
-};
-
-struct ipath_rq {
- struct ipath_rwq *wq;
- spinlock_t lock;
- u32 size; /* size of RWQE array */
- u8 max_sge;
-};
-
-struct ipath_srq {
- struct ib_srq ibsrq;
- struct ipath_rq rq;
- struct ipath_mmap_info *ip;
- /* send signal when number of RWQEs < limit */
- u32 limit;
-};
-
-struct ipath_sge_state {
- struct ipath_sge *sg_list; /* next SGE to be used if any */
- struct ipath_sge sge; /* progress state for the current SGE */
- u8 num_sge;
- u8 static_rate;
-};
-
-/*
- * This structure holds the information that the send tasklet needs
- * to send a RDMA read response or atomic operation.
- */
-struct ipath_ack_entry {
- u8 opcode;
- u8 sent;
- u32 psn;
- union {
- struct ipath_sge_state rdma_sge;
- u64 atomic_data;
- };
-};
-
-/*
- * Variables prefixed with s_ are for the requester (sender).
- * Variables prefixed with r_ are for the responder (receiver).
- * Variables prefixed with ack_ are for responder replies.
- *
- * Common variables are protected by both r_rq.lock and s_lock in that order
- * which only happens in modify_qp() or changing the QP 'state'.
- */
-struct ipath_qp {
- struct ib_qp ibqp;
- struct ipath_qp *next; /* link list for QPN hash table */
- struct ipath_qp *timer_next; /* link list for ipath_ib_timer() */
- struct ipath_qp *pio_next; /* link for ipath_ib_piobufavail() */
- struct list_head piowait; /* link for wait PIO buf */
- struct list_head timerwait; /* link for waiting for timeouts */
- struct ib_ah_attr remote_ah_attr;
- struct ipath_ib_header s_hdr; /* next packet header to send */
- atomic_t refcount;
- wait_queue_head_t wait;
- wait_queue_head_t wait_dma;
- struct tasklet_struct s_task;
- struct ipath_mmap_info *ip;
- struct ipath_sge_state *s_cur_sge;
- struct ipath_verbs_txreq *s_tx;
- struct ipath_sge_state s_sge; /* current send request data */
- struct ipath_ack_entry s_ack_queue[IPATH_MAX_RDMA_ATOMIC + 1];
- struct ipath_sge_state s_ack_rdma_sge;
- struct ipath_sge_state s_rdma_read_sge;
- struct ipath_sge_state r_sge; /* current receive data */
- spinlock_t s_lock;
- atomic_t s_dma_busy;
- u16 s_pkt_delay;
- u16 s_hdrwords; /* size of s_hdr in 32 bit words */
- u32 s_cur_size; /* size of send packet in bytes */
- u32 s_len; /* total length of s_sge */
- u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
- u32 s_next_psn; /* PSN for next request */
- u32 s_last_psn; /* last response PSN processed */
- u32 s_psn; /* current packet sequence number */
- u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
- u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
- u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */
- u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
- u64 r_wr_id; /* ID for current receive WQE */
- unsigned long r_aflags;
- u32 r_len; /* total length of r_sge */
- u32 r_rcv_len; /* receive data len processed */
- u32 r_psn; /* expected rcv packet sequence number */
- u32 r_msn; /* message sequence number */
- u8 state; /* QP state */
- u8 s_state; /* opcode of last packet sent */
- u8 s_ack_state; /* opcode of packet to ACK */
- u8 s_nak_state; /* non-zero if NAK is pending */
- u8 r_state; /* opcode of last packet received */
- u8 r_nak_state; /* non-zero if NAK is pending */
- u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
- u8 r_flags;
- u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
- u8 r_head_ack_queue; /* index into s_ack_queue[] */
- u8 qp_access_flags;
- u8 s_max_sge; /* size of s_wq->sg_list */
- u8 s_retry_cnt; /* number of times to retry */
- u8 s_rnr_retry_cnt;
- u8 s_retry; /* requester retry counter */
- u8 s_rnr_retry; /* requester RNR retry counter */
- u8 s_pkey_index; /* PKEY index to use */
- u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
- u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
- u8 s_tail_ack_queue; /* index into s_ack_queue[] */
- u8 s_flags;
- u8 s_dmult;
- u8 s_draining;
- u8 timeout; /* Timeout for this QP */
- enum ib_mtu path_mtu;
- u32 remote_qpn;
- u32 qkey; /* QKEY for this QP (for UD or RD) */
- u32 s_size; /* send work queue size */
- u32 s_head; /* new entries added here */
- u32 s_tail; /* next entry to process */
- u32 s_cur; /* current work queue entry */
- u32 s_last; /* last un-ACK'ed entry */
- u32 s_ssn; /* SSN of tail entry */
- u32 s_lsn; /* limit sequence number (credit) */
- struct ipath_swqe *s_wq; /* send work queue */
- struct ipath_swqe *s_wqe;
- struct ipath_sge *r_ud_sg_list;
- struct ipath_rq r_rq; /* receive work queue */
- struct ipath_sge r_sg_list[0]; /* verified SGEs */
-};
-
-/*
- * Atomic bit definitions for r_aflags.
- */
-#define IPATH_R_WRID_VALID 0
-
-/*
- * Bit definitions for r_flags.
- */
-#define IPATH_R_REUSE_SGE 0x01
-#define IPATH_R_RDMAR_SEQ 0x02
-
-/*
- * Bit definitions for s_flags.
- *
- * IPATH_S_FENCE_PENDING - waiting for all prior RDMA read or atomic SWQEs
- * before processing the next SWQE
- * IPATH_S_RDMAR_PENDING - waiting for any RDMA read or atomic SWQEs
- * before processing the next SWQE
- * IPATH_S_WAITING - waiting for RNR timeout or send buffer available.
- * IPATH_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
- * IPATH_S_WAIT_DMA - waiting for send DMA queue to drain before generating
- * next send completion entry not via send DMA.
- */
-#define IPATH_S_SIGNAL_REQ_WR 0x01
-#define IPATH_S_FENCE_PENDING 0x02
-#define IPATH_S_RDMAR_PENDING 0x04
-#define IPATH_S_ACK_PENDING 0x08
-#define IPATH_S_BUSY 0x10
-#define IPATH_S_WAITING 0x20
-#define IPATH_S_WAIT_SSN_CREDIT 0x40
-#define IPATH_S_WAIT_DMA 0x80
-
-#define IPATH_S_ANY_WAIT (IPATH_S_FENCE_PENDING | IPATH_S_RDMAR_PENDING | \
- IPATH_S_WAITING | IPATH_S_WAIT_SSN_CREDIT | IPATH_S_WAIT_DMA)
-
-#define IPATH_PSN_CREDIT 512
-
-/*
- * Since struct ipath_swqe is not a fixed size, we can't simply index into
- * struct ipath_qp.s_wq. This function does the array index computation.
- */
-static inline struct ipath_swqe *get_swqe_ptr(struct ipath_qp *qp,
- unsigned n)
-{
- return (struct ipath_swqe *)((char *)qp->s_wq +
- (sizeof(struct ipath_swqe) +
- qp->s_max_sge *
- sizeof(struct ipath_sge)) * n);
-}
-
-/*
- * Since struct ipath_rwqe is not a fixed size, we can't simply index into
- * struct ipath_rwq.wq. This function does the array index computation.
- */
-static inline struct ipath_rwqe *get_rwqe_ptr(struct ipath_rq *rq,
- unsigned n)
-{
- return (struct ipath_rwqe *)
- ((char *) rq->wq->wq +
- (sizeof(struct ipath_rwqe) +
- rq->max_sge * sizeof(struct ib_sge)) * n);
-}
-
-/*
- * QPN-map pages start out as NULL, they get allocated upon
- * first use and are never deallocated. This way,
- * large bitmaps are not allocated unless large numbers of QPs are used.
- */
-struct qpn_map {
- atomic_t n_free;
- void *page;
-};
-
-struct ipath_qp_table {
- spinlock_t lock;
- u32 last; /* last QP number allocated */
- u32 max; /* size of the hash table */
- u32 nmaps; /* size of the map table */
- struct ipath_qp **table;
- /* bit map of free numbers */
- struct qpn_map map[QPNMAP_ENTRIES];
-};
-
-struct ipath_lkey_table {
- spinlock_t lock;
- u32 next; /* next unused index (speeds search) */
- u32 gen; /* generation count */
- u32 max; /* size of the table */
- struct ipath_mregion **table;
-};
-
-struct ipath_opcode_stats {
- u64 n_packets; /* number of packets */
- u64 n_bytes; /* total number of bytes */
-};
-
-struct ipath_ibdev {
- struct ib_device ibdev;
- struct ipath_devdata *dd;
- struct list_head pending_mmaps;
- spinlock_t mmap_offset_lock;
- u32 mmap_offset;
- int ib_unit; /* This is the device number */
- u16 sm_lid; /* in host order */
- u8 sm_sl;
- u8 mkeyprot;
- /* non-zero when timer is set */
- unsigned long mkey_lease_timeout;
-
- /* The following fields are really per port. */
- struct ipath_qp_table qp_table;
- struct ipath_lkey_table lk_table;
- struct list_head pending[3]; /* FIFO of QPs waiting for ACKs */
- struct list_head piowait; /* list for wait PIO buf */
- struct list_head txreq_free;
- void *txreq_bufs;
- /* list of QPs waiting for RNR timer */
- struct list_head rnrwait;
- spinlock_t pending_lock;
- __be64 sys_image_guid; /* in network order */
- __be64 gid_prefix; /* in network order */
- __be64 mkey;
-
- u32 n_pds_allocated; /* number of PDs allocated for device */
- spinlock_t n_pds_lock;
- u32 n_ahs_allocated; /* number of AHs allocated for device */
- spinlock_t n_ahs_lock;
- u32 n_cqs_allocated; /* number of CQs allocated for device */
- spinlock_t n_cqs_lock;
- u32 n_qps_allocated; /* number of QPs allocated for device */
- spinlock_t n_qps_lock;
- u32 n_srqs_allocated; /* number of SRQs allocated for device */
- spinlock_t n_srqs_lock;
- u32 n_mcast_grps_allocated; /* number of mcast groups allocated */
- spinlock_t n_mcast_grps_lock;
-
- u64 ipath_sword; /* total dwords sent (sample result) */
- u64 ipath_rword; /* total dwords received (sample result) */
- u64 ipath_spkts; /* total packets sent (sample result) */
- u64 ipath_rpkts; /* total packets received (sample result) */
- /* # of ticks no data sent (sample result) */
- u64 ipath_xmit_wait;
- u64 rcv_errors; /* # of packets with SW detected rcv errs */
- u64 n_unicast_xmit; /* total unicast packets sent */
- u64 n_unicast_rcv; /* total unicast packets received */
- u64 n_multicast_xmit; /* total multicast packets sent */
- u64 n_multicast_rcv; /* total multicast packets received */
- u64 z_symbol_error_counter; /* starting count for PMA */
- u64 z_link_error_recovery_counter; /* starting count for PMA */
- u64 z_link_downed_counter; /* starting count for PMA */
- u64 z_port_rcv_errors; /* starting count for PMA */
- u64 z_port_rcv_remphys_errors; /* starting count for PMA */
- u64 z_port_xmit_discards; /* starting count for PMA */
- u64 z_port_xmit_data; /* starting count for PMA */
- u64 z_port_rcv_data; /* starting count for PMA */
- u64 z_port_xmit_packets; /* starting count for PMA */
- u64 z_port_rcv_packets; /* starting count for PMA */
- u32 z_pkey_violations; /* starting count for PMA */
- u32 z_local_link_integrity_errors; /* starting count for PMA */
- u32 z_excessive_buffer_overrun_errors; /* starting count for PMA */
- u32 z_vl15_dropped; /* starting count for PMA */
- u32 n_rc_resends;
- u32 n_rc_acks;
- u32 n_rc_qacks;
- u32 n_seq_naks;
- u32 n_rdma_seq;
- u32 n_rnr_naks;
- u32 n_other_naks;
- u32 n_timeouts;
- u32 n_pkt_drops;
- u32 n_vl15_dropped;
- u32 n_wqe_errs;
- u32 n_rdma_dup_busy;
- u32 n_piowait;
- u32 n_unaligned;
- u32 port_cap_flags;
- u32 pma_sample_start;
- u32 pma_sample_interval;
- __be16 pma_counter_select[5];
- u16 pma_tag;
- u16 qkey_violations;
- u16 mkey_violations;
- u16 mkey_lease_period;
- u16 pending_index; /* which pending queue is active */
- u8 pma_sample_status;
- u8 subnet_timeout;
- u8 vl_high_limit;
- struct ipath_opcode_stats opstats[128];
-};
-
-struct ipath_verbs_counters {
- u64 symbol_error_counter;
- u64 link_error_recovery_counter;
- u64 link_downed_counter;
- u64 port_rcv_errors;
- u64 port_rcv_remphys_errors;
- u64 port_xmit_discards;
- u64 port_xmit_data;
- u64 port_rcv_data;
- u64 port_xmit_packets;
- u64 port_rcv_packets;
- u32 local_link_integrity_errors;
- u32 excessive_buffer_overrun_errors;
- u32 vl15_dropped;
-};
-
-struct ipath_verbs_txreq {
- struct ipath_qp *qp;
- struct ipath_swqe *wqe;
- u32 map_len;
- u32 len;
- struct ipath_sge_state *ss;
- struct ipath_pio_header hdr;
- struct ipath_sdma_txreq txreq;
-};
-
-static inline struct ipath_mr *to_imr(struct ib_mr *ibmr)
-{
- return container_of(ibmr, struct ipath_mr, ibmr);
-}
-
-static inline struct ipath_pd *to_ipd(struct ib_pd *ibpd)
-{
- return container_of(ibpd, struct ipath_pd, ibpd);
-}
-
-static inline struct ipath_ah *to_iah(struct ib_ah *ibah)
-{
- return container_of(ibah, struct ipath_ah, ibah);
-}
-
-static inline struct ipath_cq *to_icq(struct ib_cq *ibcq)
-{
- return container_of(ibcq, struct ipath_cq, ibcq);
-}
-
-static inline struct ipath_srq *to_isrq(struct ib_srq *ibsrq)
-{
- return container_of(ibsrq, struct ipath_srq, ibsrq);
-}
-
-static inline struct ipath_qp *to_iqp(struct ib_qp *ibqp)
-{
- return container_of(ibqp, struct ipath_qp, ibqp);
-}
-
-static inline struct ipath_ibdev *to_idev(struct ib_device *ibdev)
-{
- return container_of(ibdev, struct ipath_ibdev, ibdev);
-}
-
-/*
- * This must be called with s_lock held.
- */
-static inline void ipath_schedule_send(struct ipath_qp *qp)
-{
- if (qp->s_flags & IPATH_S_ANY_WAIT)
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- if (!(qp->s_flags & IPATH_S_BUSY))
- tasklet_hi_schedule(&qp->s_task);
-}
-
-int ipath_process_mad(struct ib_device *ibdev,
- int mad_flags,
- u8 port_num,
- const struct ib_wc *in_wc,
- const struct ib_grh *in_grh,
- const struct ib_mad_hdr *in, size_t in_mad_size,
- struct ib_mad_hdr *out, size_t *out_mad_size,
- u16 *out_mad_pkey_index);
-
-/*
- * Compare the lower 24 bits of the two values.
- * Returns an integer <, ==, or > than zero.
- */
-static inline int ipath_cmp24(u32 a, u32 b)
-{
- return (((int) a) - ((int) b)) << 8;
-}
-
-struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid);
-
-int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
- u64 *rwords, u64 *spkts, u64 *rpkts,
- u64 *xmit_wait);
-
-int ipath_get_counters(struct ipath_devdata *dd,
- struct ipath_verbs_counters *cntrs);
-
-int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
-
-int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
-
-int ipath_mcast_tree_empty(void);
-
-__be32 ipath_compute_aeth(struct ipath_qp *qp);
-
-struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn);
-
-struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
- struct ib_qp_init_attr *init_attr,
- struct ib_udata *udata);
-
-int ipath_destroy_qp(struct ib_qp *ibqp);
-
-int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err);
-
-int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_udata *udata);
-
-int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_qp_init_attr *init_attr);
-
-unsigned ipath_free_all_qps(struct ipath_qp_table *qpt);
-
-int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
-
-void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
-
-unsigned ipath_ib_rate_to_mult(enum ib_rate rate);
-
-int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
- u32 hdrwords, struct ipath_sge_state *ss, u32 len);
-
-void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length);
-
-void ipath_skip_sge(struct ipath_sge_state *ss, u32 length);
-
-void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn);
-
-void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err);
-
-int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
-
-void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-int ipath_alloc_lkey(struct ipath_lkey_table *rkt,
- struct ipath_mregion *mr);
-
-void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey);
-
-int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
- struct ib_sge *sge, int acc);
-
-int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
- u32 len, u64 vaddr, u32 rkey, int acc);
-
-int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr);
-
-struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
- struct ib_srq_init_attr *srq_init_attr,
- struct ib_udata *udata);
-
-int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
- enum ib_srq_attr_mask attr_mask,
- struct ib_udata *udata);
-
-int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr);
-
-int ipath_destroy_srq(struct ib_srq *ibsrq);
-
-void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int sig);
-
-int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry);
-
-struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
- const struct ib_cq_init_attr *attr,
- struct ib_ucontext *context,
- struct ib_udata *udata);
-
-int ipath_destroy_cq(struct ib_cq *ibcq);
-
-int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags);
-
-int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata);
-
-struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc);
-
-struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
- u64 virt_addr, int mr_access_flags,
- struct ib_udata *udata);
-
-int ipath_dereg_mr(struct ib_mr *ibmr);
-
-struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
- struct ib_fmr_attr *fmr_attr);
-
-int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
- int list_len, u64 iova);
-
-int ipath_unmap_fmr(struct list_head *fmr_list);
-
-int ipath_dealloc_fmr(struct ib_fmr *ibfmr);
-
-void ipath_release_mmap_info(struct kref *ref);
-
-struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
- u32 size,
- struct ib_ucontext *context,
- void *obj);
-
-void ipath_update_mmap_info(struct ipath_ibdev *dev,
- struct ipath_mmap_info *ip,
- u32 size, void *obj);
-
-int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma);
-
-void ipath_insert_rnr_queue(struct ipath_qp *qp);
-
-int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
- u32 *lengthp, struct ipath_sge_state *ss);
-
-int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only);
-
-u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
- struct ib_global_route *grh, u32 hwords, u32 nwords);
-
-void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 bth0, u32 bth2);
-
-void ipath_do_send(unsigned long data);
-
-void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
- enum ib_wc_status status);
-
-int ipath_make_rc_req(struct ipath_qp *qp);
-
-int ipath_make_uc_req(struct ipath_qp *qp);
-
-int ipath_make_ud_req(struct ipath_qp *qp);
-
-int ipath_register_ib_device(struct ipath_devdata *);
-
-void ipath_unregister_ib_device(struct ipath_ibdev *);
-
-void ipath_ib_rcv(struct ipath_ibdev *, void *, void *, u32);
-
-int ipath_ib_piobufavail(struct ipath_ibdev *);
-
-unsigned ipath_get_npkeys(struct ipath_devdata *);
-
-u32 ipath_get_cr_errpkey(struct ipath_devdata *);
-
-unsigned ipath_get_pkey(struct ipath_devdata *, unsigned);
-
-extern const enum ib_wc_opcode ib_ipath_wc_opcode[];
-
-/*
- * Below converts HCA-specific LinkTrainingState to IB PhysPortState
- * values.
- */
-extern const u8 ipath_cvt_physportstate[];
-#define IB_PHYSPORTSTATE_SLEEP 1
-#define IB_PHYSPORTSTATE_POLL 2
-#define IB_PHYSPORTSTATE_DISABLED 3
-#define IB_PHYSPORTSTATE_CFG_TRAIN 4
-#define IB_PHYSPORTSTATE_LINKUP 5
-#define IB_PHYSPORTSTATE_LINK_ERR_RECOVER 6
-
-extern const int ib_ipath_state_ops[];
-
-extern unsigned int ib_ipath_lkey_table_size;
-
-extern unsigned int ib_ipath_max_cqes;
-
-extern unsigned int ib_ipath_max_cqs;
-
-extern unsigned int ib_ipath_max_qp_wrs;
-
-extern unsigned int ib_ipath_max_qps;
-
-extern unsigned int ib_ipath_max_sges;
-
-extern unsigned int ib_ipath_max_mcast_grps;
-
-extern unsigned int ib_ipath_max_mcast_qp_attached;
-
-extern unsigned int ib_ipath_max_srqs;
-
-extern unsigned int ib_ipath_max_srq_sges;
-
-extern unsigned int ib_ipath_max_srq_wrs;
-
-extern const u32 ib_ipath_rnr_table[];
-
-extern struct ib_dma_mapping_ops ipath_dma_mapping_ops;
-
-#endif /* IPATH_VERBS_H */
diff --git a/drivers/staging/rdma/ipath/ipath_verbs_mcast.c b/drivers/staging/rdma/ipath/ipath_verbs_mcast.c
deleted file mode 100644
index 72d476f..0000000
--- a/drivers/staging/rdma/ipath/ipath_verbs_mcast.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/rculist.h>
-#include <linux/slab.h>
-
-#include "ipath_verbs.h"
-
-/*
- * Global table of GID to attached QPs.
- * The table is global to all ipath devices since a send from one QP/device
- * needs to be locally routed to any locally attached QPs on the same
- * or different device.
- */
-static struct rb_root mcast_tree;
-static DEFINE_SPINLOCK(mcast_lock);
-
-/**
- * ipath_mcast_qp_alloc - alloc a struct to link a QP to mcast GID struct
- * @qp: the QP to link
- */
-static struct ipath_mcast_qp *ipath_mcast_qp_alloc(struct ipath_qp *qp)
-{
- struct ipath_mcast_qp *mqp;
-
- mqp = kmalloc(sizeof *mqp, GFP_KERNEL);
- if (!mqp)
- goto bail;
-
- mqp->qp = qp;
- atomic_inc(&qp->refcount);
-
-bail:
- return mqp;
-}
-
-static void ipath_mcast_qp_free(struct ipath_mcast_qp *mqp)
-{
- struct ipath_qp *qp = mqp->qp;
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-
- kfree(mqp);
-}
-
-/**
- * ipath_mcast_alloc - allocate the multicast GID structure
- * @mgid: the multicast GID
- *
- * A list of QPs will be attached to this structure.
- */
-static struct ipath_mcast *ipath_mcast_alloc(union ib_gid *mgid)
-{
- struct ipath_mcast *mcast;
-
- mcast = kmalloc(sizeof *mcast, GFP_KERNEL);
- if (!mcast)
- goto bail;
-
- mcast->mgid = *mgid;
- INIT_LIST_HEAD(&mcast->qp_list);
- init_waitqueue_head(&mcast->wait);
- atomic_set(&mcast->refcount, 0);
- mcast->n_attached = 0;
-
-bail:
- return mcast;
-}
-
-static void ipath_mcast_free(struct ipath_mcast *mcast)
-{
- struct ipath_mcast_qp *p, *tmp;
-
- list_for_each_entry_safe(p, tmp, &mcast->qp_list, list)
- ipath_mcast_qp_free(p);
-
- kfree(mcast);
-}
-
-/**
- * ipath_mcast_find - search the global table for the given multicast GID
- * @mgid: the multicast GID to search for
- *
- * Returns NULL if not found.
- *
- * The caller is responsible for decrementing the reference count if found.
- */
-struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid)
-{
- struct rb_node *n;
- unsigned long flags;
- struct ipath_mcast *mcast;
-
- spin_lock_irqsave(&mcast_lock, flags);
- n = mcast_tree.rb_node;
- while (n) {
- int ret;
-
- mcast = rb_entry(n, struct ipath_mcast, rb_node);
-
- ret = memcmp(mgid->raw, mcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0)
- n = n->rb_left;
- else if (ret > 0)
- n = n->rb_right;
- else {
- atomic_inc(&mcast->refcount);
- spin_unlock_irqrestore(&mcast_lock, flags);
- goto bail;
- }
- }
- spin_unlock_irqrestore(&mcast_lock, flags);
-
- mcast = NULL;
-
-bail:
- return mcast;
-}
-
-/**
- * ipath_mcast_add - insert mcast GID into table and attach QP struct
- * @mcast: the mcast GID table
- * @mqp: the QP to attach
- *
- * Return zero if both were added. Return EEXIST if the GID was already in
- * the table but the QP was added. Return ESRCH if the QP was already
- * attached and neither structure was added.
- */
-static int ipath_mcast_add(struct ipath_ibdev *dev,
- struct ipath_mcast *mcast,
- struct ipath_mcast_qp *mqp)
-{
- struct rb_node **n = &mcast_tree.rb_node;
- struct rb_node *pn = NULL;
- int ret;
-
- spin_lock_irq(&mcast_lock);
-
- while (*n) {
- struct ipath_mcast *tmcast;
- struct ipath_mcast_qp *p;
-
- pn = *n;
- tmcast = rb_entry(pn, struct ipath_mcast, rb_node);
-
- ret = memcmp(mcast->mgid.raw, tmcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0) {
- n = &pn->rb_left;
- continue;
- }
- if (ret > 0) {
- n = &pn->rb_right;
- continue;
- }
-
- /* Search the QP list to see if this is already there. */
- list_for_each_entry_rcu(p, &tmcast->qp_list, list) {
- if (p->qp == mqp->qp) {
- ret = ESRCH;
- goto bail;
- }
- }
- if (tmcast->n_attached == ib_ipath_max_mcast_qp_attached) {
- ret = ENOMEM;
- goto bail;
- }
-
- tmcast->n_attached++;
-
- list_add_tail_rcu(&mqp->list, &tmcast->qp_list);
- ret = EEXIST;
- goto bail;
- }
-
- spin_lock(&dev->n_mcast_grps_lock);
- if (dev->n_mcast_grps_allocated == ib_ipath_max_mcast_grps) {
- spin_unlock(&dev->n_mcast_grps_lock);
- ret = ENOMEM;
- goto bail;
- }
-
- dev->n_mcast_grps_allocated++;
- spin_unlock(&dev->n_mcast_grps_lock);
-
- mcast->n_attached++;
-
- list_add_tail_rcu(&mqp->list, &mcast->qp_list);
-
- atomic_inc(&mcast->refcount);
- rb_link_node(&mcast->rb_node, pn, n);
- rb_insert_color(&mcast->rb_node, &mcast_tree);
-
- ret = 0;
-
-bail:
- spin_unlock_irq(&mcast_lock);
-
- return ret;
-}
-
-int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_mcast *mcast;
- struct ipath_mcast_qp *mqp;
- int ret;
-
- /*
- * Allocate data structures since its better to do this outside of
- * spin locks and it will most likely be needed.
- */
- mcast = ipath_mcast_alloc(gid);
- if (mcast == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
- mqp = ipath_mcast_qp_alloc(qp);
- if (mqp == NULL) {
- ipath_mcast_free(mcast);
- ret = -ENOMEM;
- goto bail;
- }
- switch (ipath_mcast_add(dev, mcast, mqp)) {
- case ESRCH:
- /* Neither was used: can't attach the same QP twice. */
- ipath_mcast_qp_free(mqp);
- ipath_mcast_free(mcast);
- ret = -EINVAL;
- goto bail;
- case EEXIST: /* The mcast wasn't used */
- ipath_mcast_free(mcast);
- break;
- case ENOMEM:
- /* Exceeded the maximum number of mcast groups. */
- ipath_mcast_qp_free(mqp);
- ipath_mcast_free(mcast);
- ret = -ENOMEM;
- goto bail;
- default:
- break;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_mcast *mcast = NULL;
- struct ipath_mcast_qp *p, *tmp;
- struct rb_node *n;
- int last = 0;
- int ret;
-
- spin_lock_irq(&mcast_lock);
-
- /* Find the GID in the mcast table. */
- n = mcast_tree.rb_node;
- while (1) {
- if (n == NULL) {
- spin_unlock_irq(&mcast_lock);
- ret = -EINVAL;
- goto bail;
- }
-
- mcast = rb_entry(n, struct ipath_mcast, rb_node);
- ret = memcmp(gid->raw, mcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0)
- n = n->rb_left;
- else if (ret > 0)
- n = n->rb_right;
- else
- break;
- }
-
- /* Search the QP list. */
- list_for_each_entry_safe(p, tmp, &mcast->qp_list, list) {
- if (p->qp != qp)
- continue;
- /*
- * We found it, so remove it, but don't poison the forward
- * link until we are sure there are no list walkers.
- */
- list_del_rcu(&p->list);
- mcast->n_attached--;
-
- /* If this was the last attached QP, remove the GID too. */
- if (list_empty(&mcast->qp_list)) {
- rb_erase(&mcast->rb_node, &mcast_tree);
- last = 1;
- }
- break;
- }
-
- spin_unlock_irq(&mcast_lock);
-
- if (p) {
- /*
- * Wait for any list walkers to finish before freeing the
- * list element.
- */
- wait_event(mcast->wait, atomic_read(&mcast->refcount) <= 1);
- ipath_mcast_qp_free(p);
- }
- if (last) {
- atomic_dec(&mcast->refcount);
- wait_event(mcast->wait, !atomic_read(&mcast->refcount));
- ipath_mcast_free(mcast);
- spin_lock_irq(&dev->n_mcast_grps_lock);
- dev->n_mcast_grps_allocated--;
- spin_unlock_irq(&dev->n_mcast_grps_lock);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_mcast_tree_empty(void)
-{
- return mcast_tree.rb_node == NULL;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_wc_ppc64.c b/drivers/staging/rdma/ipath/ipath_wc_ppc64.c
deleted file mode 100644
index 1a7e20a..0000000
--- a/drivers/staging/rdma/ipath/ipath_wc_ppc64.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file is conditionally built on PowerPC only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
-
-#include "ipath_kernel.h"
-
-/**
- * ipath_enable_wc - enable write combining for MMIO writes to the device
- * @dd: infinipath device
- *
- * Nothing to do on PowerPC, so just return without error.
- */
-int ipath_enable_wc(struct ipath_devdata *dd)
-{
- return 0;
-}
diff --git a/drivers/staging/rdma/ipath/ipath_wc_x86_64.c b/drivers/staging/rdma/ipath/ipath_wc_x86_64.c
deleted file mode 100644
index 7b6e4c8..0000000
--- a/drivers/staging/rdma/ipath/ipath_wc_x86_64.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file is conditionally built on x86_64 only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
-
-#include <linux/pci.h>
-#include <asm/processor.h>
-
-#include "ipath_kernel.h"
-
-/**
- * ipath_enable_wc - enable write combining for MMIO writes to the device
- * @dd: infinipath device
- *
- * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
- * write combining.
- */
-int ipath_enable_wc(struct ipath_devdata *dd)
-{
- int ret = 0;
- u64 pioaddr, piolen;
- unsigned bits;
- const unsigned long addr = pci_resource_start(dd->pcidev, 0);
- const size_t len = pci_resource_len(dd->pcidev, 0);
-
- /*
- * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
- * chip. Linux (possibly the hardware) requires it to be on a power
- * of 2 address matching the length (which has to be a power of 2).
- * For rev1, that means the base address, for rev2, it will be just
- * the PIO buffers themselves.
- * For chips with two sets of buffers, the calculations are
- * somewhat more complicated; we need to sum, and the piobufbase
- * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
- * The buffers are still packed, so a single range covers both.
- */
- if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
- unsigned long pio2kbase, pio4kbase;
- pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
- pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
- if (pio2kbase < pio4kbase) { /* all, for now */
- pioaddr = addr + pio2kbase;
- piolen = pio4kbase - pio2kbase +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- } else {
- pioaddr = addr + pio4kbase;
- piolen = pio2kbase - pio4kbase +
- dd->ipath_piobcnt2k * dd->ipath_palign;
- }
- } else { /* single buffer size (2K, currently) */
- pioaddr = addr + dd->ipath_piobufbase;
- piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- }
-
- for (bits = 0; !(piolen & (1ULL << bits)); bits++)
- /* do nothing */ ;
-
- if (piolen != (1ULL << bits)) {
- piolen >>= bits;
- while (piolen >>= 1)
- bits++;
- piolen = 1ULL << (bits + 1);
- }
- if (pioaddr & (piolen - 1)) {
- u64 atmp;
- ipath_dbg("pioaddr %llx not on right boundary for size "
- "%llx, fixing\n",
- (unsigned long long) pioaddr,
- (unsigned long long) piolen);
- atmp = pioaddr & ~(piolen - 1);
- if (atmp < addr || (atmp + piolen) > (addr + len)) {
- ipath_dev_err(dd, "No way to align address/size "
- "(%llx/%llx), no WC mtrr\n",
- (unsigned long long) atmp,
- (unsigned long long) piolen << 1);
- ret = -ENODEV;
- } else {
- ipath_dbg("changing WC base from %llx to %llx, "
- "len from %llx to %llx\n",
- (unsigned long long) pioaddr,
- (unsigned long long) atmp,
- (unsigned long long) piolen,
- (unsigned long long) piolen << 1);
- pioaddr = atmp;
- piolen <<= 1;
- }
- }
-
- if (!ret) {
- dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
- if (dd->wc_cookie < 0) {
- ipath_dev_err(dd, "Seting mtrr failed on PIO buffers\n");
- ret = -ENODEV;
- } else if (dd->wc_cookie == 0)
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC not needed\n");
- else
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC\n");
- }
-
- return ret;
-}
-
-/**
- * ipath_disable_wc - disable write combining for MMIO writes to the device
- * @dd: infinipath device
- */
-void ipath_disable_wc(struct ipath_devdata *dd)
-{
- arch_phys_wc_del(dd->wc_cookie);
-}