| /* |
| * Copyright © 2008 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Keith Packard <keithp@keithp.com> |
| * |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_edid.h> |
| #include "intel_drv.h" |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| |
| #define DP_LINK_CHECK_TIMEOUT (10 * 1000) |
| |
| struct dp_link_dpll { |
| int link_bw; |
| struct dpll dpll; |
| }; |
| |
| static const struct dp_link_dpll gen4_dpll[] = { |
| { DP_LINK_BW_1_62, |
| { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } }, |
| { DP_LINK_BW_2_7, |
| { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } } |
| }; |
| |
| static const struct dp_link_dpll pch_dpll[] = { |
| { DP_LINK_BW_1_62, |
| { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } }, |
| { DP_LINK_BW_2_7, |
| { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } } |
| }; |
| |
| static const struct dp_link_dpll vlv_dpll[] = { |
| { DP_LINK_BW_1_62, |
| { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } }, |
| { DP_LINK_BW_2_7, |
| { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } } |
| }; |
| |
| /** |
| * is_edp - is the given port attached to an eDP panel (either CPU or PCH) |
| * @intel_dp: DP struct |
| * |
| * If a CPU or PCH DP output is attached to an eDP panel, this function |
| * will return true, and false otherwise. |
| */ |
| static bool is_edp(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| |
| return intel_dig_port->base.type == INTEL_OUTPUT_EDP; |
| } |
| |
| static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| |
| return intel_dig_port->base.base.dev; |
| } |
| |
| static struct intel_dp *intel_attached_dp(struct drm_connector *connector) |
| { |
| return enc_to_intel_dp(&intel_attached_encoder(connector)->base); |
| } |
| |
| static void intel_dp_link_down(struct intel_dp *intel_dp); |
| |
| static int |
| intel_dp_max_link_bw(struct intel_dp *intel_dp) |
| { |
| int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; |
| |
| switch (max_link_bw) { |
| case DP_LINK_BW_1_62: |
| case DP_LINK_BW_2_7: |
| break; |
| case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */ |
| max_link_bw = DP_LINK_BW_2_7; |
| break; |
| default: |
| WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n", |
| max_link_bw); |
| max_link_bw = DP_LINK_BW_1_62; |
| break; |
| } |
| return max_link_bw; |
| } |
| |
| /* |
| * The units on the numbers in the next two are... bizarre. Examples will |
| * make it clearer; this one parallels an example in the eDP spec. |
| * |
| * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as: |
| * |
| * 270000 * 1 * 8 / 10 == 216000 |
| * |
| * The actual data capacity of that configuration is 2.16Gbit/s, so the |
| * units are decakilobits. ->clock in a drm_display_mode is in kilohertz - |
| * or equivalently, kilopixels per second - so for 1680x1050R it'd be |
| * 119000. At 18bpp that's 2142000 kilobits per second. |
| * |
| * Thus the strange-looking division by 10 in intel_dp_link_required, to |
| * get the result in decakilobits instead of kilobits. |
| */ |
| |
| static int |
| intel_dp_link_required(int pixel_clock, int bpp) |
| { |
| return (pixel_clock * bpp + 9) / 10; |
| } |
| |
| static int |
| intel_dp_max_data_rate(int max_link_clock, int max_lanes) |
| { |
| return (max_link_clock * max_lanes * 8) / 10; |
| } |
| |
| static int |
| intel_dp_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; |
| int target_clock = mode->clock; |
| int max_rate, mode_rate, max_lanes, max_link_clock; |
| |
| if (is_edp(intel_dp) && fixed_mode) { |
| if (mode->hdisplay > fixed_mode->hdisplay) |
| return MODE_PANEL; |
| |
| if (mode->vdisplay > fixed_mode->vdisplay) |
| return MODE_PANEL; |
| |
| target_clock = fixed_mode->clock; |
| } |
| |
| max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp)); |
| max_lanes = drm_dp_max_lane_count(intel_dp->dpcd); |
| |
| max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); |
| mode_rate = intel_dp_link_required(target_clock, 18); |
| |
| if (mode_rate > max_rate) |
| return MODE_CLOCK_HIGH; |
| |
| if (mode->clock < 10000) |
| return MODE_CLOCK_LOW; |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) |
| return MODE_H_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| static uint32_t |
| pack_aux(uint8_t *src, int src_bytes) |
| { |
| int i; |
| uint32_t v = 0; |
| |
| if (src_bytes > 4) |
| src_bytes = 4; |
| for (i = 0; i < src_bytes; i++) |
| v |= ((uint32_t) src[i]) << ((3-i) * 8); |
| return v; |
| } |
| |
| static void |
| unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) |
| { |
| int i; |
| if (dst_bytes > 4) |
| dst_bytes = 4; |
| for (i = 0; i < dst_bytes; i++) |
| dst[i] = src >> ((3-i) * 8); |
| } |
| |
| /* hrawclock is 1/4 the FSB frequency */ |
| static int |
| intel_hrawclk(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t clkcfg; |
| |
| /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */ |
| if (IS_VALLEYVIEW(dev)) |
| return 200; |
| |
| clkcfg = I915_READ(CLKCFG); |
| switch (clkcfg & CLKCFG_FSB_MASK) { |
| case CLKCFG_FSB_400: |
| return 100; |
| case CLKCFG_FSB_533: |
| return 133; |
| case CLKCFG_FSB_667: |
| return 166; |
| case CLKCFG_FSB_800: |
| return 200; |
| case CLKCFG_FSB_1067: |
| return 266; |
| case CLKCFG_FSB_1333: |
| return 333; |
| /* these two are just a guess; one of them might be right */ |
| case CLKCFG_FSB_1600: |
| case CLKCFG_FSB_1600_ALT: |
| return 400; |
| default: |
| return 133; |
| } |
| } |
| |
| static void |
| intel_dp_init_panel_power_sequencer(struct drm_device *dev, |
| struct intel_dp *intel_dp, |
| struct edp_power_seq *out); |
| static void |
| intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, |
| struct intel_dp *intel_dp, |
| struct edp_power_seq *out); |
| |
| static enum pipe |
| vlv_power_sequencer_pipe(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_crtc *crtc = intel_dig_port->base.base.crtc; |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_dig_port->port; |
| enum pipe pipe; |
| |
| /* modeset should have pipe */ |
| if (crtc) |
| return to_intel_crtc(crtc)->pipe; |
| |
| /* init time, try to find a pipe with this port selected */ |
| for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) { |
| u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) & |
| PANEL_PORT_SELECT_MASK; |
| if (port_sel == PANEL_PORT_SELECT_DPB_VLV && port == PORT_B) |
| return pipe; |
| if (port_sel == PANEL_PORT_SELECT_DPC_VLV && port == PORT_C) |
| return pipe; |
| } |
| |
| /* shrug */ |
| return PIPE_A; |
| } |
| |
| static u32 _pp_ctrl_reg(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| return PCH_PP_CONTROL; |
| else |
| return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp)); |
| } |
| |
| static u32 _pp_stat_reg(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| return PCH_PP_STATUS; |
| else |
| return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); |
| } |
| |
| static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0; |
| } |
| |
| static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| return (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0; |
| } |
| |
| static void |
| intel_dp_check_edp(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) { |
| WARN(1, "eDP powered off while attempting aux channel communication.\n"); |
| DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n", |
| I915_READ(_pp_stat_reg(intel_dp)), |
| I915_READ(_pp_ctrl_reg(intel_dp))); |
| } |
| } |
| |
| static uint32_t |
| intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; |
| uint32_t status; |
| bool done; |
| |
| #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) |
| if (has_aux_irq) |
| done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, |
| msecs_to_jiffies_timeout(10)); |
| else |
| done = wait_for_atomic(C, 10) == 0; |
| if (!done) |
| DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", |
| has_aux_irq); |
| #undef C |
| |
| return status; |
| } |
| |
| static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp, |
| int index) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* The clock divider is based off the hrawclk, |
| * and would like to run at 2MHz. So, take the |
| * hrawclk value and divide by 2 and use that |
| * |
| * Note that PCH attached eDP panels should use a 125MHz input |
| * clock divider. |
| */ |
| if (IS_VALLEYVIEW(dev)) { |
| return index ? 0 : 100; |
| } else if (intel_dig_port->port == PORT_A) { |
| if (index) |
| return 0; |
| if (HAS_DDI(dev)) |
| return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000); |
| else if (IS_GEN6(dev) || IS_GEN7(dev)) |
| return 200; /* SNB & IVB eDP input clock at 400Mhz */ |
| else |
| return 225; /* eDP input clock at 450Mhz */ |
| } else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { |
| /* Workaround for non-ULT HSW */ |
| switch (index) { |
| case 0: return 63; |
| case 1: return 72; |
| default: return 0; |
| } |
| } else if (HAS_PCH_SPLIT(dev)) { |
| return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2); |
| } else { |
| return index ? 0 :intel_hrawclk(dev) / 2; |
| } |
| } |
| |
| static int |
| intel_dp_aux_ch(struct intel_dp *intel_dp, |
| uint8_t *send, int send_bytes, |
| uint8_t *recv, int recv_size) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; |
| uint32_t ch_data = ch_ctl + 4; |
| uint32_t aux_clock_divider; |
| int i, ret, recv_bytes; |
| uint32_t status; |
| int try, precharge, clock = 0; |
| bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev); |
| uint32_t timeout; |
| |
| /* dp aux is extremely sensitive to irq latency, hence request the |
| * lowest possible wakeup latency and so prevent the cpu from going into |
| * deep sleep states. |
| */ |
| pm_qos_update_request(&dev_priv->pm_qos, 0); |
| |
| intel_dp_check_edp(intel_dp); |
| |
| if (IS_GEN6(dev)) |
| precharge = 3; |
| else |
| precharge = 5; |
| |
| if (IS_BROADWELL(dev) && ch_ctl == DPA_AUX_CH_CTL) |
| timeout = DP_AUX_CH_CTL_TIME_OUT_600us; |
| else |
| timeout = DP_AUX_CH_CTL_TIME_OUT_400us; |
| |
| intel_aux_display_runtime_get(dev_priv); |
| |
| /* Try to wait for any previous AUX channel activity */ |
| for (try = 0; try < 3; try++) { |
| status = I915_READ_NOTRACE(ch_ctl); |
| if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) |
| break; |
| msleep(1); |
| } |
| |
| if (try == 3) { |
| WARN(1, "dp_aux_ch not started status 0x%08x\n", |
| I915_READ(ch_ctl)); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* Only 5 data registers! */ |
| if (WARN_ON(send_bytes > 20 || recv_size > 20)) { |
| ret = -E2BIG; |
| goto out; |
| } |
| |
| while ((aux_clock_divider = get_aux_clock_divider(intel_dp, clock++))) { |
| /* Must try at least 3 times according to DP spec */ |
| for (try = 0; try < 5; try++) { |
| /* Load the send data into the aux channel data registers */ |
| for (i = 0; i < send_bytes; i += 4) |
| I915_WRITE(ch_data + i, |
| pack_aux(send + i, send_bytes - i)); |
| |
| /* Send the command and wait for it to complete */ |
| I915_WRITE(ch_ctl, |
| DP_AUX_CH_CTL_SEND_BUSY | |
| (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | |
| timeout | |
| (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | |
| (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | |
| (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | |
| DP_AUX_CH_CTL_DONE | |
| DP_AUX_CH_CTL_TIME_OUT_ERROR | |
| DP_AUX_CH_CTL_RECEIVE_ERROR); |
| |
| status = intel_dp_aux_wait_done(intel_dp, has_aux_irq); |
| |
| /* Clear done status and any errors */ |
| I915_WRITE(ch_ctl, |
| status | |
| DP_AUX_CH_CTL_DONE | |
| DP_AUX_CH_CTL_TIME_OUT_ERROR | |
| DP_AUX_CH_CTL_RECEIVE_ERROR); |
| |
| if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | |
| DP_AUX_CH_CTL_RECEIVE_ERROR)) |
| continue; |
| if (status & DP_AUX_CH_CTL_DONE) |
| break; |
| } |
| if (status & DP_AUX_CH_CTL_DONE) |
| break; |
| } |
| |
| if ((status & DP_AUX_CH_CTL_DONE) == 0) { |
| DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* Check for timeout or receive error. |
| * Timeouts occur when the sink is not connected |
| */ |
| if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { |
| DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); |
| ret = -EIO; |
| goto out; |
| } |
| |
| /* Timeouts occur when the device isn't connected, so they're |
| * "normal" -- don't fill the kernel log with these */ |
| if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { |
| DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| /* Unload any bytes sent back from the other side */ |
| recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> |
| DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); |
| if (recv_bytes > recv_size) |
| recv_bytes = recv_size; |
| |
| for (i = 0; i < recv_bytes; i += 4) |
| unpack_aux(I915_READ(ch_data + i), |
| recv + i, recv_bytes - i); |
| |
| ret = recv_bytes; |
| out: |
| pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); |
| intel_aux_display_runtime_put(dev_priv); |
| |
| return ret; |
| } |
| |
| /* Write data to the aux channel in native mode */ |
| static int |
| intel_dp_aux_native_write(struct intel_dp *intel_dp, |
| uint16_t address, uint8_t *send, int send_bytes) |
| { |
| int ret; |
| uint8_t msg[20]; |
| int msg_bytes; |
| uint8_t ack; |
| |
| if (WARN_ON(send_bytes > 16)) |
| return -E2BIG; |
| |
| intel_dp_check_edp(intel_dp); |
| msg[0] = AUX_NATIVE_WRITE << 4; |
| msg[1] = address >> 8; |
| msg[2] = address & 0xff; |
| msg[3] = send_bytes - 1; |
| memcpy(&msg[4], send, send_bytes); |
| msg_bytes = send_bytes + 4; |
| for (;;) { |
| ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1); |
| if (ret < 0) |
| return ret; |
| if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) |
| break; |
| else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) |
| udelay(100); |
| else |
| return -EIO; |
| } |
| return send_bytes; |
| } |
| |
| /* Write a single byte to the aux channel in native mode */ |
| static int |
| intel_dp_aux_native_write_1(struct intel_dp *intel_dp, |
| uint16_t address, uint8_t byte) |
| { |
| return intel_dp_aux_native_write(intel_dp, address, &byte, 1); |
| } |
| |
| /* read bytes from a native aux channel */ |
| static int |
| intel_dp_aux_native_read(struct intel_dp *intel_dp, |
| uint16_t address, uint8_t *recv, int recv_bytes) |
| { |
| uint8_t msg[4]; |
| int msg_bytes; |
| uint8_t reply[20]; |
| int reply_bytes; |
| uint8_t ack; |
| int ret; |
| |
| if (WARN_ON(recv_bytes > 19)) |
| return -E2BIG; |
| |
| intel_dp_check_edp(intel_dp); |
| msg[0] = AUX_NATIVE_READ << 4; |
| msg[1] = address >> 8; |
| msg[2] = address & 0xff; |
| msg[3] = recv_bytes - 1; |
| |
| msg_bytes = 4; |
| reply_bytes = recv_bytes + 1; |
| |
| for (;;) { |
| ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, |
| reply, reply_bytes); |
| if (ret == 0) |
| return -EPROTO; |
| if (ret < 0) |
| return ret; |
| ack = reply[0]; |
| if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { |
| memcpy(recv, reply + 1, ret - 1); |
| return ret - 1; |
| } |
| else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) |
| udelay(100); |
| else |
| return -EIO; |
| } |
| } |
| |
| static int |
| intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, |
| uint8_t write_byte, uint8_t *read_byte) |
| { |
| struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; |
| struct intel_dp *intel_dp = container_of(adapter, |
| struct intel_dp, |
| adapter); |
| uint16_t address = algo_data->address; |
| uint8_t msg[5]; |
| uint8_t reply[2]; |
| unsigned retry; |
| int msg_bytes; |
| int reply_bytes; |
| int ret; |
| |
| ironlake_edp_panel_vdd_on(intel_dp); |
| intel_dp_check_edp(intel_dp); |
| /* Set up the command byte */ |
| if (mode & MODE_I2C_READ) |
| msg[0] = AUX_I2C_READ << 4; |
| else |
| msg[0] = AUX_I2C_WRITE << 4; |
| |
| if (!(mode & MODE_I2C_STOP)) |
| msg[0] |= AUX_I2C_MOT << 4; |
| |
| msg[1] = address >> 8; |
| msg[2] = address; |
| |
| switch (mode) { |
| case MODE_I2C_WRITE: |
| msg[3] = 0; |
| msg[4] = write_byte; |
| msg_bytes = 5; |
| reply_bytes = 1; |
| break; |
| case MODE_I2C_READ: |
| msg[3] = 0; |
| msg_bytes = 4; |
| reply_bytes = 2; |
| break; |
| default: |
| msg_bytes = 3; |
| reply_bytes = 1; |
| break; |
| } |
| |
| /* |
| * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device is |
| * required to retry at least seven times upon receiving AUX_DEFER |
| * before giving up the AUX transaction. |
| */ |
| for (retry = 0; retry < 7; retry++) { |
| ret = intel_dp_aux_ch(intel_dp, |
| msg, msg_bytes, |
| reply, reply_bytes); |
| if (ret < 0) { |
| DRM_DEBUG_KMS("aux_ch failed %d\n", ret); |
| goto out; |
| } |
| |
| switch (reply[0] & AUX_NATIVE_REPLY_MASK) { |
| case AUX_NATIVE_REPLY_ACK: |
| /* I2C-over-AUX Reply field is only valid |
| * when paired with AUX ACK. |
| */ |
| break; |
| case AUX_NATIVE_REPLY_NACK: |
| DRM_DEBUG_KMS("aux_ch native nack\n"); |
| ret = -EREMOTEIO; |
| goto out; |
| case AUX_NATIVE_REPLY_DEFER: |
| /* |
| * For now, just give more slack to branch devices. We |
| * could check the DPCD for I2C bit rate capabilities, |
| * and if available, adjust the interval. We could also |
| * be more careful with DP-to-Legacy adapters where a |
| * long legacy cable may force very low I2C bit rates. |
| */ |
| if (intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & |
| DP_DWN_STRM_PORT_PRESENT) |
| usleep_range(500, 600); |
| else |
| usleep_range(300, 400); |
| continue; |
| default: |
| DRM_ERROR("aux_ch invalid native reply 0x%02x\n", |
| reply[0]); |
| ret = -EREMOTEIO; |
| goto out; |
| } |
| |
| switch (reply[0] & AUX_I2C_REPLY_MASK) { |
| case AUX_I2C_REPLY_ACK: |
| if (mode == MODE_I2C_READ) { |
| *read_byte = reply[1]; |
| } |
| ret = reply_bytes - 1; |
| goto out; |
| case AUX_I2C_REPLY_NACK: |
| DRM_DEBUG_KMS("aux_i2c nack\n"); |
| ret = -EREMOTEIO; |
| goto out; |
| case AUX_I2C_REPLY_DEFER: |
| DRM_DEBUG_KMS("aux_i2c defer\n"); |
| udelay(100); |
| break; |
| default: |
| DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]); |
| ret = -EREMOTEIO; |
| goto out; |
| } |
| } |
| |
| DRM_ERROR("too many retries, giving up\n"); |
| ret = -EREMOTEIO; |
| |
| out: |
| ironlake_edp_panel_vdd_off(intel_dp, false); |
| return ret; |
| } |
| |
| static int |
| intel_dp_i2c_init(struct intel_dp *intel_dp, |
| struct intel_connector *intel_connector, const char *name) |
| { |
| int ret; |
| |
| DRM_DEBUG_KMS("i2c_init %s\n", name); |
| intel_dp->algo.running = false; |
| intel_dp->algo.address = 0; |
| intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch; |
| |
| memset(&intel_dp->adapter, '\0', sizeof(intel_dp->adapter)); |
| intel_dp->adapter.owner = THIS_MODULE; |
| intel_dp->adapter.class = I2C_CLASS_DDC; |
| strncpy(intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); |
| intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; |
| intel_dp->adapter.algo_data = &intel_dp->algo; |
| intel_dp->adapter.dev.parent = intel_connector->base.kdev; |
| |
| ret = i2c_dp_aux_add_bus(&intel_dp->adapter); |
| return ret; |
| } |
| |
| static void |
| intel_dp_set_clock(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config, int link_bw) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| const struct dp_link_dpll *divisor = NULL; |
| int i, count = 0; |
| |
| if (IS_G4X(dev)) { |
| divisor = gen4_dpll; |
| count = ARRAY_SIZE(gen4_dpll); |
| } else if (IS_HASWELL(dev)) { |
| /* Haswell has special-purpose DP DDI clocks. */ |
| } else if (HAS_PCH_SPLIT(dev)) { |
| divisor = pch_dpll; |
| count = ARRAY_SIZE(pch_dpll); |
| } else if (IS_VALLEYVIEW(dev)) { |
| divisor = vlv_dpll; |
| count = ARRAY_SIZE(vlv_dpll); |
| } |
| |
| if (divisor && count) { |
| for (i = 0; i < count; i++) { |
| if (link_bw == divisor[i].link_bw) { |
| pipe_config->dpll = divisor[i].dpll; |
| pipe_config->clock_set = true; |
| break; |
| } |
| } |
| } |
| } |
| |
| bool |
| intel_dp_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct intel_crtc *intel_crtc = encoder->new_crtc; |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| int lane_count, clock; |
| int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); |
| int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; |
| int bpp, mode_rate; |
| static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; |
| int link_avail, link_clock; |
| |
| if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A) |
| pipe_config->has_pch_encoder = true; |
| |
| pipe_config->has_dp_encoder = true; |
| |
| if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { |
| intel_fixed_panel_mode(intel_connector->panel.fixed_mode, |
| adjusted_mode); |
| if (!HAS_PCH_SPLIT(dev)) |
| intel_gmch_panel_fitting(intel_crtc, pipe_config, |
| intel_connector->panel.fitting_mode); |
| else |
| intel_pch_panel_fitting(intel_crtc, pipe_config, |
| intel_connector->panel.fitting_mode); |
| } |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) |
| return false; |
| |
| DRM_DEBUG_KMS("DP link computation with max lane count %i " |
| "max bw %02x pixel clock %iKHz\n", |
| max_lane_count, bws[max_clock], |
| adjusted_mode->crtc_clock); |
| |
| /* Walk through all bpp values. Luckily they're all nicely spaced with 2 |
| * bpc in between. */ |
| bpp = pipe_config->pipe_bpp; |
| if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && |
| dev_priv->vbt.edp_bpp < bpp) { |
| DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n", |
| dev_priv->vbt.edp_bpp); |
| bpp = dev_priv->vbt.edp_bpp; |
| } |
| |
| for (; bpp >= 6*3; bpp -= 2*3) { |
| mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, |
| bpp); |
| |
| for (clock = 0; clock <= max_clock; clock++) { |
| for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { |
| link_clock = drm_dp_bw_code_to_link_rate(bws[clock]); |
| link_avail = intel_dp_max_data_rate(link_clock, |
| lane_count); |
| |
| if (mode_rate <= link_avail) { |
| goto found; |
| } |
| } |
| } |
| } |
| |
| return false; |
| |
| found: |
| if (intel_dp->color_range_auto) { |
| /* |
| * See: |
| * CEA-861-E - 5.1 Default Encoding Parameters |
| * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry |
| */ |
| if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1) |
| intel_dp->color_range = DP_COLOR_RANGE_16_235; |
| else |
| intel_dp->color_range = 0; |
| } |
| |
| if (intel_dp->color_range) |
| pipe_config->limited_color_range = true; |
| |
| intel_dp->link_bw = bws[clock]; |
| intel_dp->lane_count = lane_count; |
| pipe_config->pipe_bpp = bpp; |
| pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw); |
| |
| DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n", |
| intel_dp->link_bw, intel_dp->lane_count, |
| pipe_config->port_clock, bpp); |
| DRM_DEBUG_KMS("DP link bw required %i available %i\n", |
| mode_rate, link_avail); |
| |
| intel_link_compute_m_n(bpp, lane_count, |
| adjusted_mode->crtc_clock, |
| pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| |
| intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); |
| |
| return true; |
| } |
| |
| static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 dpa_ctl; |
| |
| DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", crtc->config.port_clock); |
| dpa_ctl = I915_READ(DP_A); |
| dpa_ctl &= ~DP_PLL_FREQ_MASK; |
| |
| if (crtc->config.port_clock == 162000) { |
| /* For a long time we've carried around a ILK-DevA w/a for the |
| * 160MHz clock. If we're really unlucky, it's still required. |
| */ |
| DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n"); |
| dpa_ctl |= DP_PLL_FREQ_160MHZ; |
| intel_dp->DP |= DP_PLL_FREQ_160MHZ; |
| } else { |
| dpa_ctl |= DP_PLL_FREQ_270MHZ; |
| intel_dp->DP |= DP_PLL_FREQ_270MHZ; |
| } |
| |
| I915_WRITE(DP_A, dpa_ctl); |
| |
| POSTING_READ(DP_A); |
| udelay(500); |
| } |
| |
| static void intel_dp_mode_set(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode; |
| |
| /* |
| * There are four kinds of DP registers: |
| * |
| * IBX PCH |
| * SNB CPU |
| * IVB CPU |
| * CPT PCH |
| * |
| * IBX PCH and CPU are the same for almost everything, |
| * except that the CPU DP PLL is configured in this |
| * register |
| * |
| * CPT PCH is quite different, having many bits moved |
| * to the TRANS_DP_CTL register instead. That |
| * configuration happens (oddly) in ironlake_pch_enable |
| */ |
| |
| /* Preserve the BIOS-computed detected bit. This is |
| * supposed to be read-only. |
| */ |
| intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; |
| |
| /* Handle DP bits in common between all three register formats */ |
| intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; |
| intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count); |
| |
| if (intel_dp->has_audio) { |
| DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", |
| pipe_name(crtc->pipe)); |
| intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; |
| intel_write_eld(&encoder->base, adjusted_mode); |
| } |
| |
| /* Split out the IBX/CPU vs CPT settings */ |
| |
| if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) |
| intel_dp->DP |= DP_SYNC_HS_HIGH; |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) |
| intel_dp->DP |= DP_SYNC_VS_HIGH; |
| intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; |
| |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| intel_dp->DP |= DP_ENHANCED_FRAMING; |
| |
| intel_dp->DP |= crtc->pipe << 29; |
| } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { |
| if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev)) |
| intel_dp->DP |= intel_dp->color_range; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) |
| intel_dp->DP |= DP_SYNC_HS_HIGH; |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) |
| intel_dp->DP |= DP_SYNC_VS_HIGH; |
| intel_dp->DP |= DP_LINK_TRAIN_OFF; |
| |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| intel_dp->DP |= DP_ENHANCED_FRAMING; |
| |
| if (crtc->pipe == 1) |
| intel_dp->DP |= DP_PIPEB_SELECT; |
| } else { |
| intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; |
| } |
| |
| if (port == PORT_A && !IS_VALLEYVIEW(dev)) |
| ironlake_set_pll_cpu_edp(intel_dp); |
| } |
| |
| #define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) |
| #define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) |
| |
| #define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) |
| #define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) |
| |
| #define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) |
| #define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) |
| |
| static void ironlake_wait_panel_status(struct intel_dp *intel_dp, |
| u32 mask, |
| u32 value) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp_stat_reg, pp_ctrl_reg; |
| |
| pp_stat_reg = _pp_stat_reg(intel_dp); |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| |
| DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", |
| mask, value, |
| I915_READ(pp_stat_reg), |
| I915_READ(pp_ctrl_reg)); |
| |
| if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) { |
| DRM_ERROR("Panel status timeout: status %08x control %08x\n", |
| I915_READ(pp_stat_reg), |
| I915_READ(pp_ctrl_reg)); |
| } |
| } |
| |
| static void ironlake_wait_panel_on(struct intel_dp *intel_dp) |
| { |
| DRM_DEBUG_KMS("Wait for panel power on\n"); |
| ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); |
| } |
| |
| static void ironlake_wait_panel_off(struct intel_dp *intel_dp) |
| { |
| DRM_DEBUG_KMS("Wait for panel power off time\n"); |
| ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); |
| } |
| |
| static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) |
| { |
| DRM_DEBUG_KMS("Wait for panel power cycle\n"); |
| ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); |
| } |
| |
| |
| /* Read the current pp_control value, unlocking the register if it |
| * is locked |
| */ |
| |
| static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 control; |
| |
| control = I915_READ(_pp_ctrl_reg(intel_dp)); |
| control &= ~PANEL_UNLOCK_MASK; |
| control |= PANEL_UNLOCK_REGS; |
| return control; |
| } |
| |
| void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_stat_reg, pp_ctrl_reg; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| WARN(intel_dp->want_panel_vdd, |
| "eDP VDD already requested on\n"); |
| |
| intel_dp->want_panel_vdd = true; |
| |
| if (ironlake_edp_have_panel_vdd(intel_dp)) |
| return; |
| |
| DRM_DEBUG_KMS("Turning eDP VDD on\n"); |
| |
| if (!ironlake_edp_have_panel_power(intel_dp)) |
| ironlake_wait_panel_power_cycle(intel_dp); |
| |
| pp = ironlake_get_pp_control(intel_dp); |
| pp |= EDP_FORCE_VDD; |
| |
| pp_stat_reg = _pp_stat_reg(intel_dp); |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", |
| I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); |
| /* |
| * If the panel wasn't on, delay before accessing aux channel |
| */ |
| if (!ironlake_edp_have_panel_power(intel_dp)) { |
| DRM_DEBUG_KMS("eDP was not running\n"); |
| msleep(intel_dp->panel_power_up_delay); |
| } |
| } |
| |
| static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_stat_reg, pp_ctrl_reg; |
| |
| WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); |
| |
| if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { |
| DRM_DEBUG_KMS("Turning eDP VDD off\n"); |
| |
| pp = ironlake_get_pp_control(intel_dp); |
| pp &= ~EDP_FORCE_VDD; |
| |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| pp_stat_reg = _pp_stat_reg(intel_dp); |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| |
| /* Make sure sequencer is idle before allowing subsequent activity */ |
| DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", |
| I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); |
| msleep(intel_dp->panel_power_down_delay); |
| } |
| } |
| |
| static void ironlake_panel_vdd_work(struct work_struct *__work) |
| { |
| struct intel_dp *intel_dp = container_of(to_delayed_work(__work), |
| struct intel_dp, panel_vdd_work); |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| mutex_lock(&dev->mode_config.mutex); |
| ironlake_panel_vdd_off_sync(intel_dp); |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| |
| void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) |
| { |
| if (!is_edp(intel_dp)) |
| return; |
| |
| WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); |
| |
| intel_dp->want_panel_vdd = false; |
| |
| if (sync) { |
| ironlake_panel_vdd_off_sync(intel_dp); |
| } else { |
| /* |
| * Queue the timer to fire a long |
| * time from now (relative to the power down delay) |
| * to keep the panel power up across a sequence of operations |
| */ |
| schedule_delayed_work(&intel_dp->panel_vdd_work, |
| msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5)); |
| } |
| } |
| |
| void ironlake_edp_panel_on(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_ctrl_reg; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| DRM_DEBUG_KMS("Turn eDP power on\n"); |
| |
| if (ironlake_edp_have_panel_power(intel_dp)) { |
| DRM_DEBUG_KMS("eDP power already on\n"); |
| return; |
| } |
| |
| ironlake_wait_panel_power_cycle(intel_dp); |
| |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| pp = ironlake_get_pp_control(intel_dp); |
| if (IS_GEN5(dev)) { |
| /* ILK workaround: disable reset around power sequence */ |
| pp &= ~PANEL_POWER_RESET; |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| } |
| |
| pp |= POWER_TARGET_ON; |
| if (!IS_GEN5(dev)) |
| pp |= PANEL_POWER_RESET; |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| |
| ironlake_wait_panel_on(intel_dp); |
| |
| if (IS_GEN5(dev)) { |
| pp |= PANEL_POWER_RESET; /* restore panel reset bit */ |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| } |
| } |
| |
| void ironlake_edp_panel_off(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_ctrl_reg; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| DRM_DEBUG_KMS("Turn eDP power off\n"); |
| |
| WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); |
| |
| pp = ironlake_get_pp_control(intel_dp); |
| /* We need to switch off panel power _and_ force vdd, for otherwise some |
| * panels get very unhappy and cease to work. */ |
| pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); |
| |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| |
| intel_dp->want_panel_vdd = false; |
| |
| ironlake_wait_panel_off(intel_dp); |
| } |
| |
| void ironlake_edp_backlight_on(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_ctrl_reg; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| DRM_DEBUG_KMS("\n"); |
| /* |
| * If we enable the backlight right away following a panel power |
| * on, we may see slight flicker as the panel syncs with the eDP |
| * link. So delay a bit to make sure the image is solid before |
| * allowing it to appear. |
| */ |
| msleep(intel_dp->backlight_on_delay); |
| pp = ironlake_get_pp_control(intel_dp); |
| pp |= EDP_BLC_ENABLE; |
| |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| |
| intel_panel_enable_backlight(intel_dp->attached_connector); |
| } |
| |
| void ironlake_edp_backlight_off(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp; |
| u32 pp_ctrl_reg; |
| |
| if (!is_edp(intel_dp)) |
| return; |
| |
| intel_panel_disable_backlight(intel_dp->attached_connector); |
| |
| DRM_DEBUG_KMS("\n"); |
| pp = ironlake_get_pp_control(intel_dp); |
| pp &= ~EDP_BLC_ENABLE; |
| |
| pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
| |
| I915_WRITE(pp_ctrl_reg, pp); |
| POSTING_READ(pp_ctrl_reg); |
| msleep(intel_dp->backlight_off_delay); |
| } |
| |
| static void ironlake_edp_pll_on(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_crtc *crtc = intel_dig_port->base.base.crtc; |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 dpa_ctl; |
| |
| assert_pipe_disabled(dev_priv, |
| to_intel_crtc(crtc)->pipe); |
| |
| DRM_DEBUG_KMS("\n"); |
| dpa_ctl = I915_READ(DP_A); |
| WARN(dpa_ctl & DP_PLL_ENABLE, "dp pll on, should be off\n"); |
| WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n"); |
| |
| /* We don't adjust intel_dp->DP while tearing down the link, to |
| * facilitate link retraining (e.g. after hotplug). Hence clear all |
| * enable bits here to ensure that we don't enable too much. */ |
| intel_dp->DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE); |
| intel_dp->DP |= DP_PLL_ENABLE; |
| I915_WRITE(DP_A, intel_dp->DP); |
| POSTING_READ(DP_A); |
| udelay(200); |
| } |
| |
| static void ironlake_edp_pll_off(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_crtc *crtc = intel_dig_port->base.base.crtc; |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 dpa_ctl; |
| |
| assert_pipe_disabled(dev_priv, |
| to_intel_crtc(crtc)->pipe); |
| |
| dpa_ctl = I915_READ(DP_A); |
| WARN((dpa_ctl & DP_PLL_ENABLE) == 0, |
| "dp pll off, should be on\n"); |
| WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n"); |
| |
| /* We can't rely on the value tracked for the DP register in |
| * intel_dp->DP because link_down must not change that (otherwise link |
| * re-training will fail. */ |
| dpa_ctl &= ~DP_PLL_ENABLE; |
| I915_WRITE(DP_A, dpa_ctl); |
| POSTING_READ(DP_A); |
| udelay(200); |
| } |
| |
| /* If the sink supports it, try to set the power state appropriately */ |
| void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) |
| { |
| int ret, i; |
| |
| /* Should have a valid DPCD by this point */ |
| if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) |
| return; |
| |
| if (mode != DRM_MODE_DPMS_ON) { |
| ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, |
| DP_SET_POWER_D3); |
| if (ret != 1) |
| DRM_DEBUG_DRIVER("failed to write sink power state\n"); |
| } else { |
| /* |
| * When turning on, we need to retry for 1ms to give the sink |
| * time to wake up. |
| */ |
| for (i = 0; i < 3; i++) { |
| ret = intel_dp_aux_native_write_1(intel_dp, |
| DP_SET_POWER, |
| DP_SET_POWER_D0); |
| if (ret == 1) |
| break; |
| msleep(1); |
| } |
| } |
| } |
| |
| static bool intel_dp_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 tmp = I915_READ(intel_dp->output_reg); |
| |
| if (!(tmp & DP_PORT_EN)) |
| return false; |
| |
| if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { |
| *pipe = PORT_TO_PIPE_CPT(tmp); |
| } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { |
| *pipe = PORT_TO_PIPE(tmp); |
| } else { |
| u32 trans_sel; |
| u32 trans_dp; |
| int i; |
| |
| switch (intel_dp->output_reg) { |
| case PCH_DP_B: |
| trans_sel = TRANS_DP_PORT_SEL_B; |
| break; |
| case PCH_DP_C: |
| trans_sel = TRANS_DP_PORT_SEL_C; |
| break; |
| case PCH_DP_D: |
| trans_sel = TRANS_DP_PORT_SEL_D; |
| break; |
| default: |
| return true; |
| } |
| |
| for_each_pipe(i) { |
| trans_dp = I915_READ(TRANS_DP_CTL(i)); |
| if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) { |
| *pipe = i; |
| return true; |
| } |
| } |
| |
| DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", |
| intel_dp->output_reg); |
| } |
| |
| return true; |
| } |
| |
| static void intel_dp_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_config *pipe_config) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| u32 tmp, flags = 0; |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| int dotclock; |
| |
| if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { |
| tmp = I915_READ(intel_dp->output_reg); |
| if (tmp & DP_SYNC_HS_HIGH) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (tmp & DP_SYNC_VS_HIGH) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| } else { |
| tmp = I915_READ(TRANS_DP_CTL(crtc->pipe)); |
| if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| } |
| |
| pipe_config->adjusted_mode.flags |= flags; |
| |
| pipe_config->has_dp_encoder = true; |
| |
| intel_dp_get_m_n(crtc, pipe_config); |
| |
| if (port == PORT_A) { |
| if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ) |
| pipe_config->port_clock = 162000; |
| else |
| pipe_config->port_clock = 270000; |
| } |
| |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| |
| if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A) |
| ironlake_check_encoder_dotclock(pipe_config, dotclock); |
| |
| pipe_config->adjusted_mode.crtc_clock = dotclock; |
| |
| if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && |
| pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { |
| /* |
| * This is a big fat ugly hack. |
| * |
| * Some machines in UEFI boot mode provide us a VBT that has 18 |
| * bpp and 1.62 GHz link bandwidth for eDP, which for reasons |
| * unknown we fail to light up. Yet the same BIOS boots up with |
| * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as |
| * max, not what it tells us to use. |
| * |
| * Note: This will still be broken if the eDP panel is not lit |
| * up by the BIOS, and thus we can't get the mode at module |
| * load. |
| */ |
| DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", |
| pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); |
| dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; |
| } |
| } |
| |
| static bool is_edp_psr(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| return dev_priv->psr.sink_support; |
| } |
| |
| static bool intel_edp_is_psr_enabled(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!HAS_PSR(dev)) |
| return false; |
| |
| return I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE; |
| } |
| |
| static void intel_edp_psr_write_vsc(struct intel_dp *intel_dp, |
| struct edp_vsc_psr *vsc_psr) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); |
| u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config.cpu_transcoder); |
| u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config.cpu_transcoder); |
| uint32_t *data = (uint32_t *) vsc_psr; |
| unsigned int i; |
| |
| /* As per BSPec (Pipe Video Data Island Packet), we need to disable |
| the video DIP being updated before program video DIP data buffer |
| registers for DIP being updated. */ |
| I915_WRITE(ctl_reg, 0); |
| POSTING_READ(ctl_reg); |
| |
| for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) { |
| if (i < sizeof(struct edp_vsc_psr)) |
| I915_WRITE(data_reg + i, *data++); |
| else |
| I915_WRITE(data_reg + i, 0); |
| } |
| |
| I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW); |
| POSTING_READ(ctl_reg); |
| } |
| |
| static void intel_edp_psr_setup(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct edp_vsc_psr psr_vsc; |
| |
| if (intel_dp->psr_setup_done) |
| return; |
| |
| /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */ |
| memset(&psr_vsc, 0, sizeof(psr_vsc)); |
| psr_vsc.sdp_header.HB0 = 0; |
| psr_vsc.sdp_header.HB1 = 0x7; |
| psr_vsc.sdp_header.HB2 = 0x2; |
| psr_vsc.sdp_header.HB3 = 0x8; |
| intel_edp_psr_write_vsc(intel_dp, &psr_vsc); |
| |
| /* Avoid continuous PSR exit by masking memup and hpd */ |
| I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP | |
| EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); |
| |
| intel_dp->psr_setup_done = true; |
| } |
| |
| static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp, 0); |
| int precharge = 0x3; |
| int msg_size = 5; /* Header(4) + Message(1) */ |
| |
| /* Enable PSR in sink */ |
| if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) |
| intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG, |
| DP_PSR_ENABLE & |
| ~DP_PSR_MAIN_LINK_ACTIVE); |
| else |
| intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG, |
| DP_PSR_ENABLE | |
| DP_PSR_MAIN_LINK_ACTIVE); |
| |
| /* Setup AUX registers */ |
| I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND); |
| I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION); |
| I915_WRITE(EDP_PSR_AUX_CTL(dev), |
| DP_AUX_CH_CTL_TIME_OUT_400us | |
| (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | |
| (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | |
| (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT)); |
| } |
| |
| static void intel_edp_psr_enable_source(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t max_sleep_time = 0x1f; |
| uint32_t idle_frames = 1; |
| uint32_t val = 0x0; |
| const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; |
| |
| if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) { |
| val |= EDP_PSR_LINK_STANDBY; |
| val |= EDP_PSR_TP2_TP3_TIME_0us; |
| val |= EDP_PSR_TP1_TIME_0us; |
| val |= EDP_PSR_SKIP_AUX_EXIT; |
| } else |
| val |= EDP_PSR_LINK_DISABLE; |
| |
| I915_WRITE(EDP_PSR_CTL(dev), val | |
| IS_BROADWELL(dev) ? 0 : link_entry_time | |
| max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | |
| idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | |
| EDP_PSR_ENABLE); |
| } |
| |
| static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc = dig_port->base.base.crtc; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj; |
| struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; |
| |
| dev_priv->psr.source_ok = false; |
| |
| if (!HAS_PSR(dev)) { |
| DRM_DEBUG_KMS("PSR not supported on this platform\n"); |
| return false; |
| } |
| |
| if ((intel_encoder->type != INTEL_OUTPUT_EDP) || |
| (dig_port->port != PORT_A)) { |
| DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n"); |
| return false; |
| } |
| |
| if (!i915_enable_psr) { |
| DRM_DEBUG_KMS("PSR disable by flag\n"); |
| return false; |
| } |
| |
| crtc = dig_port->base.base.crtc; |
| if (crtc == NULL) { |
| DRM_DEBUG_KMS("crtc not active for PSR\n"); |
| return false; |
| } |
| |
| intel_crtc = to_intel_crtc(crtc); |
| if (!intel_crtc_active(crtc)) { |
| DRM_DEBUG_KMS("crtc not active for PSR\n"); |
| return false; |
| } |
| |
| obj = to_intel_framebuffer(crtc->fb)->obj; |
| if (obj->tiling_mode != I915_TILING_X || |
| obj->fence_reg == I915_FENCE_REG_NONE) { |
| DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n"); |
| return false; |
| } |
| |
| if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) { |
| DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n"); |
| return false; |
| } |
| |
| if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) & |
| S3D_ENABLE) { |
| DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n"); |
| return false; |
| } |
| |
| if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { |
| DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n"); |
| return false; |
| } |
| |
| dev_priv->psr.source_ok = true; |
| return true; |
| } |
| |
| static void intel_edp_psr_do_enable(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| if (!intel_edp_psr_match_conditions(intel_dp) || |
| intel_edp_is_psr_enabled(dev)) |
| return; |
| |
| /* Setup PSR once */ |
| intel_edp_psr_setup(intel_dp); |
| |
| /* Enable PSR on the panel */ |
| intel_edp_psr_enable_sink(intel_dp); |
| |
| /* Enable PSR on the host */ |
| intel_edp_psr_enable_source(intel_dp); |
| } |
| |
| void intel_edp_psr_enable(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| if (intel_edp_psr_match_conditions(intel_dp) && |
| !intel_edp_is_psr_enabled(dev)) |
| intel_edp_psr_do_enable(intel_dp); |
| } |
| |
| void intel_edp_psr_disable(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (!intel_edp_is_psr_enabled(dev)) |
| return; |
| |
| I915_WRITE(EDP_PSR_CTL(dev), |
| I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE); |
| |
| /* Wait till PSR is idle */ |
| if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) & |
| EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10)) |
| DRM_ERROR("Timed out waiting for PSR Idle State\n"); |
| } |
| |
| void intel_edp_psr_update(struct drm_device *dev) |
| { |
| struct intel_encoder *encoder; |
| struct intel_dp *intel_dp = NULL; |
| |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) |
| if (encoder->type == INTEL_OUTPUT_EDP) { |
| intel_dp = enc_to_intel_dp(&encoder->base); |
| |
| if (!is_edp_psr(dev)) |
| return; |
| |
| if (!intel_edp_psr_match_conditions(intel_dp)) |
| intel_edp_psr_disable(intel_dp); |
| else |
| if (!intel_edp_is_psr_enabled(dev)) |
| intel_edp_psr_do_enable(intel_dp); |
| } |
| } |
| |
| static void intel_disable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct drm_device *dev = encoder->base.dev; |
| |
| /* Make sure the panel is off before trying to change the mode. But also |
| * ensure that we have vdd while we switch off the panel. */ |
| ironlake_edp_panel_vdd_on(intel_dp); |
| ironlake_edp_backlight_off(intel_dp); |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); |
| ironlake_edp_panel_off(intel_dp); |
| |
| /* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */ |
| if (!(port == PORT_A || IS_VALLEYVIEW(dev))) |
| intel_dp_link_down(intel_dp); |
| } |
| |
| static void intel_post_disable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| struct drm_device *dev = encoder->base.dev; |
| |
| if (port == PORT_A || IS_VALLEYVIEW(dev)) { |
| intel_dp_link_down(intel_dp); |
| if (!IS_VALLEYVIEW(dev)) |
| ironlake_edp_pll_off(intel_dp); |
| } |
| } |
| |
| static void intel_enable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| uint32_t dp_reg = I915_READ(intel_dp->output_reg); |
| |
| if (WARN_ON(dp_reg & DP_PORT_EN)) |
| return; |
| |
| ironlake_edp_panel_vdd_on(intel_dp); |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); |
| intel_dp_start_link_train(intel_dp); |
| ironlake_edp_panel_on(intel_dp); |
| ironlake_edp_panel_vdd_off(intel_dp, true); |
| intel_dp_complete_link_train(intel_dp); |
| intel_dp_stop_link_train(intel_dp); |
| } |
| |
| static void g4x_enable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| |
| intel_enable_dp(encoder); |
| ironlake_edp_backlight_on(intel_dp); |
| } |
| |
| static void vlv_enable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| |
| ironlake_edp_backlight_on(intel_dp); |
| } |
| |
| static void g4x_pre_enable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
| |
| if (dport->port == PORT_A) |
| ironlake_edp_pll_on(intel_dp); |
| } |
| |
| static void vlv_pre_enable_dp(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| int port = vlv_dport_to_channel(dport); |
| int pipe = intel_crtc->pipe; |
| struct edp_power_seq power_seq; |
| u32 val; |
| |
| mutex_lock(&dev_priv->dpio_lock); |
| |
| val = vlv_dpio_read(dev_priv, pipe, DPIO_DATA_LANE_A(port)); |
| val = 0; |
| if (pipe) |
| val |= (1<<21); |
| else |
| val &= ~(1<<21); |
| val |= 0x001000c4; |
| vlv_dpio_write(dev_priv, pipe, DPIO_DATA_CHANNEL(port), val); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_CLOCKBUF0(port), 0x00760018); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_CLOCKBUF8(port), 0x00400888); |
| |
| mutex_unlock(&dev_priv->dpio_lock); |
| |
| /* init power sequencer on this pipe and port */ |
| intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); |
| intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, |
| &power_seq); |
| |
| intel_enable_dp(encoder); |
| |
| vlv_wait_port_ready(dev_priv, port); |
| } |
| |
| static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) |
| { |
| struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = |
| to_intel_crtc(encoder->base.crtc); |
| int port = vlv_dport_to_channel(dport); |
| int pipe = intel_crtc->pipe; |
| |
| /* Program Tx lane resets to default */ |
| mutex_lock(&dev_priv->dpio_lock); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_TX(port), |
| DPIO_PCS_TX_LANE2_RESET | |
| DPIO_PCS_TX_LANE1_RESET); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_CLK(port), |
| DPIO_PCS_CLK_CRI_RXEB_EIOS_EN | |
| DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN | |
| (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) | |
| DPIO_PCS_CLK_SOFT_RESET); |
| |
| /* Fix up inter-pair skew failure */ |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_STAGGER1(port), 0x00750f00); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_CTL(port), 0x00001500); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_LANE(port), 0x40400000); |
| mutex_unlock(&dev_priv->dpio_lock); |
| } |
| |
| /* |
| * Native read with retry for link status and receiver capability reads for |
| * cases where the sink may still be asleep. |
| */ |
| static bool |
| intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, |
| uint8_t *recv, int recv_bytes) |
| { |
| int ret, i; |
| |
| /* |
| * Sinks are *supposed* to come up within 1ms from an off state, |
| * but we're also supposed to retry 3 times per the spec. |
| */ |
| for (i = 0; i < 3; i++) { |
| ret = intel_dp_aux_native_read(intel_dp, address, recv, |
| recv_bytes); |
| if (ret == recv_bytes) |
| return true; |
| msleep(1); |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Fetch AUX CH registers 0x202 - 0x207 which contain |
| * link status information |
| */ |
| static bool |
| intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) |
| { |
| return intel_dp_aux_native_read_retry(intel_dp, |
| DP_LANE0_1_STATUS, |
| link_status, |
| DP_LINK_STATUS_SIZE); |
| } |
| |
| #if 0 |
| static char *voltage_names[] = { |
| "0.4V", "0.6V", "0.8V", "1.2V" |
| }; |
| static char *pre_emph_names[] = { |
| "0dB", "3.5dB", "6dB", "9.5dB" |
| }; |
| static char *link_train_names[] = { |
| "pattern 1", "pattern 2", "idle", "off" |
| }; |
| #endif |
| |
| /* |
| * These are source-specific values; current Intel hardware supports |
| * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB |
| */ |
| |
| static uint8_t |
| intel_dp_voltage_max(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| |
| if (IS_VALLEYVIEW(dev) || IS_BROADWELL(dev)) |
| return DP_TRAIN_VOLTAGE_SWING_1200; |
| else if (IS_GEN7(dev) && port == PORT_A) |
| return DP_TRAIN_VOLTAGE_SWING_800; |
| else if (HAS_PCH_CPT(dev) && port != PORT_A) |
| return DP_TRAIN_VOLTAGE_SWING_1200; |
| else |
| return DP_TRAIN_VOLTAGE_SWING_800; |
| } |
| |
| static uint8_t |
| intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| enum port port = dp_to_dig_port(intel_dp)->port; |
| |
| if (IS_BROADWELL(dev)) { |
| switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| return DP_TRAIN_PRE_EMPHASIS_3_5; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| default: |
| return DP_TRAIN_PRE_EMPHASIS_0; |
| } |
| } else if (IS_HASWELL(dev)) { |
| switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| return DP_TRAIN_PRE_EMPHASIS_9_5; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| return DP_TRAIN_PRE_EMPHASIS_3_5; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| default: |
| return DP_TRAIN_PRE_EMPHASIS_0; |
| } |
| } else if (IS_VALLEYVIEW(dev)) { |
| switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| return DP_TRAIN_PRE_EMPHASIS_9_5; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| return DP_TRAIN_PRE_EMPHASIS_3_5; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| default: |
| return DP_TRAIN_PRE_EMPHASIS_0; |
| } |
| } else if (IS_GEN7(dev) && port == PORT_A) { |
| switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| return DP_TRAIN_PRE_EMPHASIS_3_5; |
| default: |
| return DP_TRAIN_PRE_EMPHASIS_0; |
| } |
| } else { |
| switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| return DP_TRAIN_PRE_EMPHASIS_6; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| return DP_TRAIN_PRE_EMPHASIS_3_5; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| default: |
| return DP_TRAIN_PRE_EMPHASIS_0; |
| } |
| } |
| } |
| |
| static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
| struct intel_crtc *intel_crtc = |
| to_intel_crtc(dport->base.base.crtc); |
| unsigned long demph_reg_value, preemph_reg_value, |
| uniqtranscale_reg_value; |
| uint8_t train_set = intel_dp->train_set[0]; |
| int port = vlv_dport_to_channel(dport); |
| int pipe = intel_crtc->pipe; |
| |
| switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { |
| case DP_TRAIN_PRE_EMPHASIS_0: |
| preemph_reg_value = 0x0004000; |
| switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| demph_reg_value = 0x2B405555; |
| uniqtranscale_reg_value = 0x552AB83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| demph_reg_value = 0x2B404040; |
| uniqtranscale_reg_value = 0x5548B83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| demph_reg_value = 0x2B245555; |
| uniqtranscale_reg_value = 0x5560B83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| demph_reg_value = 0x2B405555; |
| uniqtranscale_reg_value = 0x5598DA3A; |
| break; |
| default: |
| return 0; |
| } |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_3_5: |
| preemph_reg_value = 0x0002000; |
| switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| demph_reg_value = 0x2B404040; |
| uniqtranscale_reg_value = 0x5552B83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| demph_reg_value = 0x2B404848; |
| uniqtranscale_reg_value = 0x5580B83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| demph_reg_value = 0x2B404040; |
| uniqtranscale_reg_value = 0x55ADDA3A; |
| break; |
| default: |
| return 0; |
| } |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_6: |
| preemph_reg_value = 0x0000000; |
| switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| demph_reg_value = 0x2B305555; |
| uniqtranscale_reg_value = 0x5570B83A; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| demph_reg_value = 0x2B2B4040; |
| uniqtranscale_reg_value = 0x55ADDA3A; |
| break; |
| default: |
| return 0; |
| } |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_9_5: |
| preemph_reg_value = 0x0006000; |
| switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| demph_reg_value = 0x1B405555; |
| uniqtranscale_reg_value = 0x55ADDA3A; |
| break; |
| default: |
| return 0; |
| } |
| break; |
| default: |
| return 0; |
| } |
| |
| mutex_lock(&dev_priv->dpio_lock); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_OCALINIT(port), 0x00000000); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_SWING_CTL4(port), demph_reg_value); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_SWING_CTL2(port), |
| uniqtranscale_reg_value); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_SWING_CTL3(port), 0x0C782040); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_STAGGER0(port), 0x00030000); |
| vlv_dpio_write(dev_priv, pipe, DPIO_PCS_CTL_OVER1(port), preemph_reg_value); |
| vlv_dpio_write(dev_priv, pipe, DPIO_TX_OCALINIT(port), 0x80000000); |
| mutex_unlock(&dev_priv->dpio_lock); |
| |
| return 0; |
| } |
| |
| static void |
| intel_get_adjust_train(struct intel_dp *intel_dp, |
| const uint8_t link_status[DP_LINK_STATUS_SIZE]) |
| { |
| uint8_t v = 0; |
| uint8_t p = 0; |
| int lane; |
| uint8_t voltage_max; |
| uint8_t preemph_max; |
| |
| for (lane = 0; lane < intel_dp->lane_count; lane++) { |
| uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane); |
| uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane); |
| |
| if (this_v > v) |
| v = this_v; |
| if (this_p > p) |
| p = this_p; |
| } |
| |
| voltage_max = intel_dp_voltage_max(intel_dp); |
| if (v >= voltage_max) |
| v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; |
| |
| preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); |
| if (p >= preemph_max) |
| p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; |
| |
| for (lane = 0; lane < 4; lane++) |
| intel_dp->train_set[lane] = v | p; |
| } |
| |
| static uint32_t |
| intel_gen4_signal_levels(uint8_t train_set) |
| { |
| uint32_t signal_levels = 0; |
| |
| switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
| case DP_TRAIN_VOLTAGE_SWING_400: |
| default: |
| signal_levels |= DP_VOLTAGE_0_4; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_600: |
| signal_levels |= DP_VOLTAGE_0_6; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_800: |
| signal_levels |= DP_VOLTAGE_0_8; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_1200: |
| signal_levels |= DP_VOLTAGE_1_2; |
| break; |
| } |
| switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { |
| case DP_TRAIN_PRE_EMPHASIS_0: |
| default: |
| signal_levels |= DP_PRE_EMPHASIS_0; |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_3_5: |
| signal_levels |= DP_PRE_EMPHASIS_3_5; |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_6: |
| signal_levels |= DP_PRE_EMPHASIS_6; |
| break; |
| case DP_TRAIN_PRE_EMPHASIS_9_5: |
| signal_levels |= DP_PRE_EMPHASIS_9_5; |
| break; |
| } |
| return signal_levels; |
| } |
| |
| /* Gen6's DP voltage swing and pre-emphasis control */ |
| static uint32_t |
| intel_gen6_edp_signal_levels(uint8_t train_set) |
| { |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| switch (signal_levels) { |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: |
| return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: |
| return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B; |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B; |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: |
| case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0: |
| return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B; |
| default: |
| DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" |
| "0x%x\n", signal_levels); |
| return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; |
| } |
| } |
| |
| /* Gen7's DP voltage swing and pre-emphasis control */ |
| static uint32_t |
| intel_gen7_edp_signal_levels(uint8_t train_set) |
| { |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| switch (signal_levels) { |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: |
| return EDP_LINK_TRAIN_400MV_0DB_IVB; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return EDP_LINK_TRAIN_400MV_3_5DB_IVB; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: |
| return EDP_LINK_TRAIN_400MV_6DB_IVB; |
| |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: |
| return EDP_LINK_TRAIN_600MV_0DB_IVB; |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return EDP_LINK_TRAIN_600MV_3_5DB_IVB; |
| |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: |
| return EDP_LINK_TRAIN_800MV_0DB_IVB; |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return EDP_LINK_TRAIN_800MV_3_5DB_IVB; |
| |
| default: |
| DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" |
| "0x%x\n", signal_levels); |
| return EDP_LINK_TRAIN_500MV_0DB_IVB; |
| } |
| } |
| |
| /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */ |
| static uint32_t |
| intel_hsw_signal_levels(uint8_t train_set) |
| { |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| switch (signal_levels) { |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_400MV_0DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_400MV_3_5DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: |
| return DDI_BUF_EMP_400MV_6DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5: |
| return DDI_BUF_EMP_400MV_9_5DB_HSW; |
| |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_600MV_0DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_600MV_3_5DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: |
| return DDI_BUF_EMP_600MV_6DB_HSW; |
| |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_800MV_0DB_HSW; |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_800MV_3_5DB_HSW; |
| default: |
| DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" |
| "0x%x\n", signal_levels); |
| return DDI_BUF_EMP_400MV_0DB_HSW; |
| } |
| } |
| |
| static uint32_t |
| intel_bdw_signal_levels(uint8_t train_set) |
| { |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| switch (signal_levels) { |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_400MV_0DB_BDW; /* Sel0 */ |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_400MV_3_5DB_BDW; /* Sel1 */ |
| case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: |
| return DDI_BUF_EMP_400MV_6DB_BDW; /* Sel2 */ |
| |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_600MV_0DB_BDW; /* Sel3 */ |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_600MV_3_5DB_BDW; /* Sel4 */ |
| case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6: |
| return DDI_BUF_EMP_600MV_6DB_BDW; /* Sel5 */ |
| |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_800MV_0DB_BDW; /* Sel6 */ |
| case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: |
| return DDI_BUF_EMP_800MV_3_5DB_BDW; /* Sel7 */ |
| |
| case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0: |
| return DDI_BUF_EMP_1200MV_0DB_BDW; /* Sel8 */ |
| |
| default: |
| DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" |
| "0x%x\n", signal_levels); |
| return DDI_BUF_EMP_400MV_0DB_BDW; /* Sel0 */ |
| } |
| } |
| |
| /* Properly updates "DP" with the correct signal levels. */ |
| static void |
| intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| enum port port = intel_dig_port->port; |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| uint32_t signal_levels, mask; |
| uint8_t train_set = intel_dp->train_set[0]; |
| |
| if (IS_BROADWELL(dev)) { |
| signal_levels = intel_bdw_signal_levels(train_set); |
| mask = DDI_BUF_EMP_MASK; |
| } else if (IS_HASWELL(dev)) { |
| signal_levels = intel_hsw_signal_levels(train_set); |
| mask = DDI_BUF_EMP_MASK; |
| } else if (IS_VALLEYVIEW(dev)) { |
| signal_levels = intel_vlv_signal_levels(intel_dp); |
| mask = 0; |
| } else if (IS_GEN7(dev) && port == PORT_A) { |
| signal_levels = intel_gen7_edp_signal_levels(train_set); |
| mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; |
| } else if (IS_GEN6(dev) && port == PORT_A) { |
| signal_levels = intel_gen6_edp_signal_levels(train_set); |
| mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; |
| } else { |
| signal_levels = intel_gen4_signal_levels(train_set); |
| mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK; |
| } |
| |
| DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels); |
| |
| *DP = (*DP & ~mask) | signal_levels; |
| } |
| |
| static bool |
| intel_dp_set_link_train(struct intel_dp *intel_dp, |
| uint32_t *DP, |
| uint8_t dp_train_pat) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_dig_port->port; |
| uint8_t buf[sizeof(intel_dp->train_set) + 1]; |
| int ret, len; |
| |
| if (HAS_DDI(dev)) { |
| uint32_t temp = I915_READ(DP_TP_CTL(port)); |
| |
| if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) |
| temp |= DP_TP_CTL_SCRAMBLE_DISABLE; |
| else |
| temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE; |
| |
| temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; |
| switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { |
| case DP_TRAINING_PATTERN_DISABLE: |
| temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; |
| |
| break; |
| case DP_TRAINING_PATTERN_1: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| break; |
| case DP_TRAINING_PATTERN_2: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT2; |
| break; |
| case DP_TRAINING_PATTERN_3: |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT3; |
| break; |
| } |
| I915_WRITE(DP_TP_CTL(port), temp); |
| |
| } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { |
| *DP &= ~DP_LINK_TRAIN_MASK_CPT; |
| |
| switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { |
| case DP_TRAINING_PATTERN_DISABLE: |
| *DP |= DP_LINK_TRAIN_OFF_CPT; |
| break; |
| case DP_TRAINING_PATTERN_1: |
| *DP |= DP_LINK_TRAIN_PAT_1_CPT; |
| break; |
| case DP_TRAINING_PATTERN_2: |
| *DP |= DP_LINK_TRAIN_PAT_2_CPT; |
| break; |
| case DP_TRAINING_PATTERN_3: |
| DRM_ERROR("DP training pattern 3 not supported\n"); |
| *DP |= DP_LINK_TRAIN_PAT_2_CPT; |
| break; |
| } |
| |
| } else { |
| *DP &= ~DP_LINK_TRAIN_MASK; |
| |
| switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { |
| case DP_TRAINING_PATTERN_DISABLE: |
| *DP |= DP_LINK_TRAIN_OFF; |
| break; |
| case DP_TRAINING_PATTERN_1: |
| *DP |= DP_LINK_TRAIN_PAT_1; |
| break; |
| case DP_TRAINING_PATTERN_2: |
| *DP |= DP_LINK_TRAIN_PAT_2; |
| break; |
| case DP_TRAINING_PATTERN_3: |
| DRM_ERROR("DP training pattern 3 not supported\n"); |
| *DP |= DP_LINK_TRAIN_PAT_2; |
| break; |
| } |
| } |
| |
| I915_WRITE(intel_dp->output_reg, *DP); |
| POSTING_READ(intel_dp->output_reg); |
| |
| buf[0] = dp_train_pat; |
| if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) == |
| DP_TRAINING_PATTERN_DISABLE) { |
| /* don't write DP_TRAINING_LANEx_SET on disable */ |
| len = 1; |
| } else { |
| /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */ |
| memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count); |
| len = intel_dp->lane_count + 1; |
| } |
| |
| ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_PATTERN_SET, |
| buf, len); |
| |
| return ret == len; |
| } |
| |
| static bool |
| intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP, |
| uint8_t dp_train_pat) |
| { |
| memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); |
| intel_dp_set_signal_levels(intel_dp, DP); |
| return intel_dp_set_link_train(intel_dp, DP, dp_train_pat); |
| } |
| |
| static bool |
| intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP, |
| const uint8_t link_status[DP_LINK_STATUS_SIZE]) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| intel_get_adjust_train(intel_dp, link_status); |
| intel_dp_set_signal_levels(intel_dp, DP); |
| |
| I915_WRITE(intel_dp->output_reg, *DP); |
| POSTING_READ(intel_dp->output_reg); |
| |
| ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, |
| intel_dp->train_set, |
| intel_dp->lane_count); |
| |
| return ret == intel_dp->lane_count; |
| } |
| |
| static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_dig_port->port; |
| uint32_t val; |
| |
| if (!HAS_DDI(dev)) |
| return; |
| |
| val = I915_READ(DP_TP_CTL(port)); |
| val &= ~DP_TP_CTL_LINK_TRAIN_MASK; |
| val |= DP_TP_CTL_LINK_TRAIN_IDLE; |
| I915_WRITE(DP_TP_CTL(port), val); |
| |
| /* |
| * On PORT_A we can have only eDP in SST mode. There the only reason |
| * we need to set idle transmission mode is to work around a HW issue |
| * where we enable the pipe while not in idle link-training mode. |
| * In this case there is requirement to wait for a minimum number of |
| * idle patterns to be sent. |
| */ |
| if (port == PORT_A) |
| return; |
| |
| if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE), |
| 1)) |
| DRM_ERROR("Timed out waiting for DP idle patterns\n"); |
| } |
| |
| /* Enable corresponding port and start training pattern 1 */ |
| void |
| intel_dp_start_link_train(struct intel_dp *intel_dp) |
| { |
| struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base; |
| struct drm_device *dev = encoder->dev; |
| int i; |
| uint8_t voltage; |
| int voltage_tries, loop_tries; |
| uint32_t DP = intel_dp->DP; |
| uint8_t link_config[2]; |
| |
| if (HAS_DDI(dev)) |
| intel_ddi_prepare_link_retrain(encoder); |
| |
| /* Write the link configuration data */ |
| link_config[0] = intel_dp->link_bw; |
| link_config[1] = intel_dp->lane_count; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; |
| intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, link_config, 2); |
| |
| link_config[0] = 0; |
| link_config[1] = DP_SET_ANSI_8B10B; |
| intel_dp_aux_native_write(intel_dp, DP_DOWNSPREAD_CTRL, link_config, 2); |
| |
| DP |= DP_PORT_EN; |
| |
| /* clock recovery */ |
| if (!intel_dp_reset_link_train(intel_dp, &DP, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| DRM_ERROR("failed to enable link training\n"); |
| return; |
| } |
| |
| voltage = 0xff; |
| voltage_tries = 0; |
| loop_tries = 0; |
| for (;;) { |
| uint8_t link_status[DP_LINK_STATUS_SIZE]; |
| |
| drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd); |
| if (!intel_dp_get_link_status(intel_dp, link_status)) { |
| DRM_ERROR("failed to get link status\n"); |
| break; |
| } |
| |
| if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { |
| DRM_DEBUG_KMS("clock recovery OK\n"); |
| break; |
| } |
| |
| /* Check to see if we've tried the max voltage */ |
| for (i = 0; i < intel_dp->lane_count; i++) |
| if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) |
| break; |
| if (i == intel_dp->lane_count) { |
| ++loop_tries; |
| if (loop_tries == 5) { |
| DRM_ERROR("too many full retries, give up\n"); |
| break; |
| } |
| intel_dp_reset_link_train(intel_dp, &DP, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE); |
| voltage_tries = 0; |
| continue; |
| } |
| |
| /* Check to see if we've tried the same voltage 5 times */ |
| if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { |
| ++voltage_tries; |
| if (voltage_tries == 5) { |
| DRM_ERROR("too many voltage retries, give up\n"); |
| break; |
| } |
| } else |
| voltage_tries = 0; |
| voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; |
| |
| /* Update training set as requested by target */ |
| if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) { |
| DRM_ERROR("failed to update link training\n"); |
| break; |
| } |
| } |
| |
| intel_dp->DP = DP; |
| } |
| |
| void |
| intel_dp_complete_link_train(struct intel_dp *intel_dp) |
| { |
| bool channel_eq = false; |
| int tries, cr_tries; |
| uint32_t DP = intel_dp->DP; |
| |
| /* channel equalization */ |
| if (!intel_dp_set_link_train(intel_dp, &DP, |
| DP_TRAINING_PATTERN_2 | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| DRM_ERROR("failed to start channel equalization\n"); |
| return; |
| } |
| |
| tries = 0; |
| cr_tries = 0; |
| channel_eq = false; |
| for (;;) { |
| uint8_t link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (cr_tries > 5) { |
| DRM_ERROR("failed to train DP, aborting\n"); |
| intel_dp_link_down(intel_dp); |
| break; |
| } |
| |
| drm_dp_link_train_channel_eq_delay(intel_dp->dpcd); |
| if (!intel_dp_get_link_status(intel_dp, link_status)) { |
| DRM_ERROR("failed to get link status\n"); |
| break; |
| } |
| |
| /* Make sure clock is still ok */ |
| if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { |
| intel_dp_start_link_train(intel_dp); |
| intel_dp_set_link_train(intel_dp, &DP, |
| DP_TRAINING_PATTERN_2 | |
| DP_LINK_SCRAMBLING_DISABLE); |
| cr_tries++; |
| continue; |
| } |
| |
| if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { |
| channel_eq = true; |
| break; |
| } |
| |
| /* Try 5 times, then try clock recovery if that fails */ |
| if (tries > 5) { |
| intel_dp_link_down(intel_dp); |
| intel_dp_start_link_train(intel_dp); |
| intel_dp_set_link_train(intel_dp, &DP, |
| DP_TRAINING_PATTERN_2 | |
| DP_LINK_SCRAMBLING_DISABLE); |
| tries = 0; |
| cr_tries++; |
| continue; |
| } |
| |
| /* Update training set as requested by target */ |
| if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) { |
| DRM_ERROR("failed to update link training\n"); |
| break; |
| } |
| ++tries; |
| } |
| |
| intel_dp_set_idle_link_train(intel_dp); |
| |
| intel_dp->DP = DP; |
| |
| if (channel_eq) |
| DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n"); |
| |
| } |
| |
| void intel_dp_stop_link_train(struct intel_dp *intel_dp) |
| { |
| intel_dp_set_link_train(intel_dp, &intel_dp->DP, |
| DP_TRAINING_PATTERN_DISABLE); |
| } |
| |
| static void |
| intel_dp_link_down(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| enum port port = intel_dig_port->port; |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = |
| to_intel_crtc(intel_dig_port->base.base.crtc); |
| uint32_t DP = intel_dp->DP; |
| |
| /* |
| * DDI code has a strict mode set sequence and we should try to respect |
| * it, otherwise we might hang the machine in many different ways. So we |
| * really should be disabling the port only on a complete crtc_disable |
| * sequence. This function is just called under two conditions on DDI |
| * code: |
| * - Link train failed while doing crtc_enable, and on this case we |
| * really should respect the mode set sequence and wait for a |
| * crtc_disable. |
| * - Someone turned the monitor off and intel_dp_check_link_status |
| * called us. We don't need to disable the whole port on this case, so |
| * when someone turns the monitor on again, |
| * intel_ddi_prepare_link_retrain will take care of redoing the link |
| * train. |
| */ |
| if (HAS_DDI(dev)) |
| return; |
| |
| if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)) |
| return; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) { |
| DP &= ~DP_LINK_TRAIN_MASK_CPT; |
| I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT); |
| } else { |
| DP &= ~DP_LINK_TRAIN_MASK; |
| I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE); |
| } |
| POSTING_READ(intel_dp->output_reg); |
| |
| /* We don't really know why we're doing this */ |
| intel_wait_for_vblank(dev, intel_crtc->pipe); |
| |
| if (HAS_PCH_IBX(dev) && |
| I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { |
| struct drm_crtc *crtc = intel_dig_port->base.base.crtc; |
| |
| /* Hardware workaround: leaving our transcoder select |
| * set to transcoder B while it's off will prevent the |
| * corresponding HDMI output on transcoder A. |
| * |
| * Combine this with another hardware workaround: |
| * transcoder select bit can only be cleared while the |
| * port is enabled. |
| */ |
| DP &= ~DP_PIPEB_SELECT; |
| I915_WRITE(intel_dp->output_reg, DP); |
| |
| /* Changes to enable or select take place the vblank |
| * after being written. |
| */ |
| if (WARN_ON(crtc == NULL)) { |
| /* We should never try to disable a port without a crtc |
| * attached. For paranoia keep the code around for a |
| * bit. */ |
| POSTING_READ(intel_dp->output_reg); |
| msleep(50); |
| } else |
| intel_wait_for_vblank(dev, intel_crtc->pipe); |
| } |
| |
| DP &= ~DP_AUDIO_OUTPUT_ENABLE; |
| I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); |
| POSTING_READ(intel_dp->output_reg); |
| msleep(intel_dp->panel_power_down_delay); |
| } |
| |
| static bool |
| intel_dp_get_dpcd(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3]; |
| |
| if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd, |
| sizeof(intel_dp->dpcd)) == 0) |
| return false; /* aux transfer failed */ |
| |
| hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd), |
| 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false); |
| DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump); |
| |
| if (intel_dp->dpcd[DP_DPCD_REV] == 0) |
| return false; /* DPCD not present */ |
| |
| /* Check if the panel supports PSR */ |
| memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd)); |
| if (is_edp(intel_dp)) { |
| intel_dp_aux_native_read_retry(intel_dp, DP_PSR_SUPPORT, |
| intel_dp->psr_dpcd, |
| sizeof(intel_dp->psr_dpcd)); |
| if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) { |
| dev_priv->psr.sink_support = true; |
| DRM_DEBUG_KMS("Detected EDP PSR Panel.\n"); |
| } |
| } |
| |
| if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & |
| DP_DWN_STRM_PORT_PRESENT)) |
| return true; /* native DP sink */ |
| |
| if (intel_dp->dpcd[DP_DPCD_REV] == 0x10) |
| return true; /* no per-port downstream info */ |
| |
| if (intel_dp_aux_native_read_retry(intel_dp, DP_DOWNSTREAM_PORT_0, |
| intel_dp->downstream_ports, |
| DP_MAX_DOWNSTREAM_PORTS) == 0) |
| return false; /* downstream port status fetch failed */ |
| |
| return true; |
| } |
| |
| static void |
| intel_dp_probe_oui(struct intel_dp *intel_dp) |
| { |
| u8 buf[3]; |
| |
| if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) |
| return; |
| |
| ironlake_edp_panel_vdd_on(intel_dp); |
| |
| if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3)) |
| DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", |
| buf[0], buf[1], buf[2]); |
| |
| if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3)) |
| DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", |
| buf[0], buf[1], buf[2]); |
| |
| ironlake_edp_panel_vdd_off(intel_dp, false); |
| } |
| |
| static bool |
| intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector) |
| { |
| int ret; |
| |
| ret = intel_dp_aux_native_read_retry(intel_dp, |
| DP_DEVICE_SERVICE_IRQ_VECTOR, |
| sink_irq_vector, 1); |
| if (!ret) |
| return false; |
| |
| return true; |
| } |
| |
| static void |
| intel_dp_handle_test_request(struct intel_dp *intel_dp) |
| { |
| /* NAK by default */ |
| intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_NAK); |
| } |
| |
| /* |
| * According to DP spec |
| * 5.1.2: |
| * 1. Read DPCD |
| * 2. Configure link according to Receiver Capabilities |
| * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 |
| * 4. Check link status on receipt of hot-plug interrupt |
| */ |
| |
| void |
| intel_dp_check_link_status(struct intel_dp *intel_dp) |
| { |
| struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; |
| u8 sink_irq_vector; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (!intel_encoder->connectors_active) |
| return; |
| |
| if (WARN_ON(!intel_encoder->base.crtc)) |
| return; |
| |
| /* Try to read receiver status if the link appears to be up */ |
| if (!intel_dp_get_link_status(intel_dp, link_status)) { |
| intel_dp_link_down(intel_dp); |
| return; |
| } |
| |
| /* Now read the DPCD to see if it's actually running */ |
| if (!intel_dp_get_dpcd(intel_dp)) { |
| intel_dp_link_down(intel_dp); |
| return; |
| } |
| |
| /* Try to read the source of the interrupt */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && |
| intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) { |
| /* Clear interrupt source */ |
| intel_dp_aux_native_write_1(intel_dp, |
| DP_DEVICE_SERVICE_IRQ_VECTOR, |
| sink_irq_vector); |
| |
| if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) |
| intel_dp_handle_test_request(intel_dp); |
| if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ)) |
| DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); |
| } |
| |
| if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { |
| DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", |
| drm_get_encoder_name(&intel_encoder->base)); |
| intel_dp_start_link_train(intel_dp); |
| intel_dp_complete_link_train(intel_dp); |
| intel_dp_stop_link_train(intel_dp); |
| } |
| } |
| |
| /* XXX this is probably wrong for multiple downstream ports */ |
| static enum drm_connector_status |
| intel_dp_detect_dpcd(struct intel_dp *intel_dp) |
| { |
| uint8_t *dpcd = intel_dp->dpcd; |
| uint8_t type; |
| |
| if (!intel_dp_get_dpcd(intel_dp)) |
| return connector_status_disconnected; |
| |
| /* if there's no downstream port, we're done */ |
| if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT)) |
| return connector_status_connected; |
| |
| /* If we're HPD-aware, SINK_COUNT changes dynamically */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && |
| intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { |
| uint8_t reg; |
| if (!intel_dp_aux_native_read_retry(intel_dp, DP_SINK_COUNT, |
| ®, 1)) |
| return connector_status_unknown; |
| return DP_GET_SINK_COUNT(reg) ? connector_status_connected |
| : connector_status_disconnected; |
| } |
| |
| /* If no HPD, poke DDC gently */ |
| if (drm_probe_ddc(&intel_dp->adapter)) |
| return connector_status_connected; |
| |
| /* Well we tried, say unknown for unreliable port types */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { |
| type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; |
| if (type == DP_DS_PORT_TYPE_VGA || |
| type == DP_DS_PORT_TYPE_NON_EDID) |
| return connector_status_unknown; |
| } else { |
| type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & |
| DP_DWN_STRM_PORT_TYPE_MASK; |
| if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || |
| type == DP_DWN_STRM_PORT_TYPE_OTHER) |
| return connector_status_unknown; |
| } |
| |
| /* Anything else is out of spec, warn and ignore */ |
| DRM_DEBUG_KMS("Broken DP branch device, ignoring\n"); |
| return connector_status_disconnected; |
| } |
| |
| static enum drm_connector_status |
| ironlake_dp_detect(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| enum drm_connector_status status; |
| |
| /* Can't disconnect eDP, but you can close the lid... */ |
| if (is_edp(intel_dp)) { |
| status = intel_panel_detect(dev); |
| if (status == connector_status_unknown) |
| status = connector_status_connected; |
| return status; |
| } |
| |
| if (!ibx_digital_port_connected(dev_priv, intel_dig_port)) |
| return connector_status_disconnected; |
| |
| return intel_dp_detect_dpcd(intel_dp); |
| } |
| |
| static enum drm_connector_status |
| g4x_dp_detect(struct intel_dp *intel_dp) |
| { |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| uint32_t bit; |
| |
| /* Can't disconnect eDP, but you can close the lid... */ |
| if (is_edp(intel_dp)) { |
| enum drm_connector_status status; |
| |
| status = intel_panel_detect(dev); |
| if (status == connector_status_unknown) |
| status = connector_status_connected; |
| return status; |
| } |
| |
| switch (intel_dig_port->port) { |
| case PORT_B: |
| bit = PORTB_HOTPLUG_LIVE_STATUS; |
| break; |
| case PORT_C: |
| bit = PORTC_HOTPLUG_LIVE_STATUS; |
| break; |
| case PORT_D: |
| bit = PORTD_HOTPLUG_LIVE_STATUS; |
| break; |
| default: |
| return connector_status_unknown; |
| } |
| |
| if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0) |
| return connector_status_disconnected; |
| |
| return intel_dp_detect_dpcd(intel_dp); |
| } |
| |
| static struct edid * |
| intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| /* use cached edid if we have one */ |
| if (intel_connector->edid) { |
| /* invalid edid */ |
| if (IS_ERR(intel_connector->edid)) |
| return NULL; |
| |
| return drm_edid_duplicate(intel_connector->edid); |
| } |
| |
| return drm_get_edid(connector, adapter); |
| } |
| |
| static int |
| intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| /* use cached edid if we have one */ |
| if (intel_connector->edid) { |
| /* invalid edid */ |
| if (IS_ERR(intel_connector->edid)) |
| return 0; |
| |
| return intel_connector_update_modes(connector, |
| intel_connector->edid); |
| } |
| |
| return intel_ddc_get_modes(connector, adapter); |
| } |
| |
| static enum drm_connector_status |
| intel_dp_detect(struct drm_connector *connector, bool force) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *intel_encoder = &intel_dig_port->base; |
| struct drm_device *dev = connector->dev; |
| enum drm_connector_status status; |
| struct edid *edid = NULL; |
| |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, drm_get_connector_name(connector)); |
| |
| intel_dp->has_audio = false; |
| |
| if (HAS_PCH_SPLIT(dev)) |
| status = ironlake_dp_detect(intel_dp); |
| else |
| status = g4x_dp_detect(intel_dp); |
| |
| if (status != connector_status_connected) |
| return status; |
| |
| intel_dp_probe_oui(intel_dp); |
| |
| if (intel_dp->force_audio != HDMI_AUDIO_AUTO) { |
| intel_dp->has_audio = (intel_dp->force_audio == HDMI_AUDIO_ON); |
| } else { |
| edid = intel_dp_get_edid(connector, &intel_dp->adapter); |
| if (edid) { |
| intel_dp->has_audio = drm_detect_monitor_audio(edid); |
| kfree(edid); |
| } |
| } |
| |
| if (intel_encoder->type != INTEL_OUTPUT_EDP) |
| intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; |
| return connector_status_connected; |
| } |
| |
| static int intel_dp_get_modes(struct drm_connector *connector) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct drm_device *dev = connector->dev; |
| int ret; |
| |
| /* We should parse the EDID data and find out if it has an audio sink |
| */ |
| |
| ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter); |
| if (ret) |
| return ret; |
| |
| /* if eDP has no EDID, fall back to fixed mode */ |
| if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { |
| struct drm_display_mode *mode; |
| mode = drm_mode_duplicate(dev, |
| intel_connector->panel.fixed_mode); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static bool |
| intel_dp_detect_audio(struct drm_connector *connector) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct edid *edid; |
| bool has_audio = false; |
| |
| edid = intel_dp_get_edid(connector, &intel_dp->adapter); |
| if (edid) { |
| has_audio = drm_detect_monitor_audio(edid); |
| kfree(edid); |
| } |
| |
| return has_audio; |
| } |
| |
| static int |
| intel_dp_set_property(struct drm_connector *connector, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct intel_encoder *intel_encoder = intel_attached_encoder(connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); |
| int ret; |
| |
| ret = drm_object_property_set_value(&connector->base, property, val); |
| if (ret) |
| return ret; |
| |
| if (property == dev_priv->force_audio_property) { |
| int i = val; |
| bool has_audio; |
| |
| if (i == intel_dp->force_audio) |
| return 0; |
| |
| intel_dp->force_audio = i; |
| |
| if (i == HDMI_AUDIO_AUTO) |
| has_audio = intel_dp_detect_audio(connector); |
| else |
| has_audio = (i == HDMI_AUDIO_ON); |
| |
| if (has_audio == intel_dp->has_audio) |
| return 0; |
| |
| intel_dp->has_audio = has_audio; |
| goto done; |
| } |
| |
| if (property == dev_priv->broadcast_rgb_property) { |
| bool old_auto = intel_dp->color_range_auto; |
| uint32_t old_range = intel_dp->color_range; |
| |
| switch (val) { |
| case INTEL_BROADCAST_RGB_AUTO: |
| intel_dp->color_range_auto = true; |
| break; |
| case INTEL_BROADCAST_RGB_FULL: |
| intel_dp->color_range_auto = false; |
| intel_dp->color_range = 0; |
| break; |
| case INTEL_BROADCAST_RGB_LIMITED: |
| intel_dp->color_range_auto = false; |
| intel_dp->color_range = DP_COLOR_RANGE_16_235; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (old_auto == intel_dp->color_range_auto && |
| old_range == intel_dp->color_range) |
| return 0; |
| |
| goto done; |
| } |
| |
| if (is_edp(intel_dp) && |
| property == connector->dev->mode_config.scaling_mode_property) { |
| if (val == DRM_MODE_SCALE_NONE) { |
| DRM_DEBUG_KMS("no scaling not supported\n"); |
| return -EINVAL; |
| } |
| |
| if (intel_connector->panel.fitting_mode == val) { |
| /* the eDP scaling property is not changed */ |
| return 0; |
| } |
| intel_connector->panel.fitting_mode = val; |
| |
| goto done; |
| } |
| |
| return -EINVAL; |
| |
| done: |
| if (intel_encoder->base.crtc) |
| intel_crtc_restore_mode(intel_encoder->base.crtc); |
| |
| return 0; |
| } |
| |
| static void |
| intel_dp_connector_destroy(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| if (!IS_ERR_OR_NULL(intel_connector->edid)) |
| kfree(intel_connector->edid); |
| |
| /* Can't call is_edp() since the encoder may have been destroyed |
| * already. */ |
| if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) |
| intel_panel_fini(&intel_connector->panel); |
| |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| void intel_dp_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp = &intel_dig_port->dp; |
| struct drm_device *dev = intel_dp_to_dev(intel_dp); |
| |
| i2c_del_adapter(&intel_dp->adapter); |
| drm_encoder_cleanup(encoder); |
| if (is_edp(intel_dp)) { |
| cancel_delayed_work_sync(&intel_dp->panel_vdd_work); |
| mutex_lock(&dev->mode_config.mutex); |
| ironlake_panel_vdd_off_sync(intel_dp); |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| kfree(intel_dig_port); |
| } |
| |
| static const struct drm_connector_funcs intel_dp_connector_funcs = { |
| .dpms = intel_connector_dpms, |
| .detect = intel_dp_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = intel_dp_set_property, |
| .destroy = intel_dp_connector_destroy, |
| }; |
| |
| static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { |
| .get_modes = intel_dp_get_modes, |
| .mode_valid = intel_dp_mode_valid, |
| .best_encoder = intel_best_encoder, |
| }; |
| |
| static const struct drm_encoder_funcs intel_dp_enc_funcs = { |
| .destroy = intel_dp_encoder_destroy, |
| }; |
| |
| static void |
| intel_dp_hot_plug(struct intel_encoder *intel_encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); |
| |
| intel_dp_check_link_status(intel_dp); |
| } |
| |
| /* Return which DP Port should be selected for Transcoder DP control */ |
| int |
| intel_trans_dp_port_sel(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_encoder *intel_encoder; |
| struct intel_dp *intel_dp; |
| |
| for_each_encoder_on_crtc(dev, crtc, intel_encoder) { |
| intel_dp = enc_to_intel_dp(&intel_encoder->base); |
| |
| if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT || |
| intel_encoder->type == INTEL_OUTPUT_EDP) |
| return intel_dp->output_reg; |
| } |
| |
| return -1; |
| } |
| |
| /* check the VBT to see whether the eDP is on DP-D port */ |
| bool intel_dpd_is_edp(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| union child_device_config *p_child; |
| int i; |
| |
| if (!dev_priv->vbt.child_dev_num) |
| return false; |
| |
| for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { |
| p_child = dev_priv->vbt.child_dev + i; |
| |
| if (p_child->common.dvo_port == PORT_IDPD && |
| (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) == |
| (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) |
| return true; |
| } |
| return false; |
| } |
| |
| static void |
| intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| intel_attach_force_audio_property(connector); |
| intel_attach_broadcast_rgb_property(connector); |
| intel_dp->color_range_auto = true; |
| |
| if (is_edp(intel_dp)) { |
| drm_mode_create_scaling_mode_property(connector->dev); |
| drm_object_attach_property( |
| &connector->base, |
| connector->dev->mode_config.scaling_mode_property, |
| DRM_MODE_SCALE_ASPECT); |
| intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT; |
| } |
| } |
| |
| static void |
| intel_dp_init_panel_power_sequencer(struct drm_device *dev, |
| struct intel_dp *intel_dp, |
| struct edp_power_seq *out) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct edp_power_seq cur, vbt, spec, final; |
| u32 pp_on, pp_off, pp_div, pp; |
| int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg; |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| pp_ctrl_reg = PCH_PP_CONTROL; |
| pp_on_reg = PCH_PP_ON_DELAYS; |
| pp_off_reg = PCH_PP_OFF_DELAYS; |
| pp_div_reg = PCH_PP_DIVISOR; |
| } else { |
| enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); |
| |
| pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); |
| pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); |
| pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); |
| pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); |
| } |
| |
| /* Workaround: Need to write PP_CONTROL with the unlock key as |
| * the very first thing. */ |
| pp = ironlake_get_pp_control(intel_dp); |
| I915_WRITE(pp_ctrl_reg, pp); |
| |
| pp_on = I915_READ(pp_on_reg); |
| pp_off = I915_READ(pp_off_reg); |
| pp_div = I915_READ(pp_div_reg); |
| |
| /* Pull timing values out of registers */ |
| cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> |
| PANEL_POWER_UP_DELAY_SHIFT; |
| |
| cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> |
| PANEL_LIGHT_ON_DELAY_SHIFT; |
| |
| cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> |
| PANEL_LIGHT_OFF_DELAY_SHIFT; |
| |
| cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> |
| PANEL_POWER_DOWN_DELAY_SHIFT; |
| |
| cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> |
| PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000; |
| |
| DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", |
| cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); |
| |
| vbt = dev_priv->vbt.edp_pps; |
| |
| /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of |
| * our hw here, which are all in 100usec. */ |
| spec.t1_t3 = 210 * 10; |
| spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */ |
| spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */ |
| spec.t10 = 500 * 10; |
| /* This one is special and actually in units of 100ms, but zero |
| * based in the hw (so we need to add 100 ms). But the sw vbt |
| * table multiplies it with 1000 to make it in units of 100usec, |
| * too. */ |
| spec.t11_t12 = (510 + 100) * 10; |
| |
| DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", |
| vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12); |
| |
| /* Use the max of the register settings and vbt. If both are |
| * unset, fall back to the spec limits. */ |
| #define assign_final(field) final.field = (max(cur.field, vbt.field) == 0 ? \ |
| spec.field : \ |
| max(cur.field, vbt.field)) |
| assign_final(t1_t3); |
| assign_final(t8); |
| assign_final(t9); |
| assign_final(t10); |
| assign_final(t11_t12); |
| #undef assign_final |
| |
| #define get_delay(field) (DIV_ROUND_UP(final.field, 10)) |
| intel_dp->panel_power_up_delay = get_delay(t1_t3); |
| intel_dp->backlight_on_delay = get_delay(t8); |
| intel_dp->backlight_off_delay = get_delay(t9); |
| intel_dp->panel_power_down_delay = get_delay(t10); |
| intel_dp->panel_power_cycle_delay = get_delay(t11_t12); |
| #undef get_delay |
| |
| DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", |
| intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, |
| intel_dp->panel_power_cycle_delay); |
| |
| DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", |
| intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); |
| |
| if (out) |
| *out = final; |
| } |
| |
| static void |
| intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, |
| struct intel_dp *intel_dp, |
| struct edp_power_seq *seq) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 pp_on, pp_off, pp_div, port_sel = 0; |
| int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev); |
| int pp_on_reg, pp_off_reg, pp_div_reg; |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| pp_on_reg = PCH_PP_ON_DELAYS; |
| pp_off_reg = PCH_PP_OFF_DELAYS; |
| pp_div_reg = PCH_PP_DIVISOR; |
| } else { |
| enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); |
| |
| pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); |
| pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); |
| pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); |
| } |
| |
| /* And finally store the new values in the power sequencer. */ |
| pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | |
| (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); |
| pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | |
| (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); |
| /* Compute the divisor for the pp clock, simply match the Bspec |
| * formula. */ |
| pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; |
| pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) |
| << PANEL_POWER_CYCLE_DELAY_SHIFT); |
| |
| /* Haswell doesn't have any port selection bits for the panel |
| * power sequencer any more. */ |
| if (IS_VALLEYVIEW(dev)) { |
| if (dp_to_dig_port(intel_dp)->port == PORT_B) |
| port_sel = PANEL_PORT_SELECT_DPB_VLV; |
| else |
| port_sel = PANEL_PORT_SELECT_DPC_VLV; |
| } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { |
| if (dp_to_dig_port(intel_dp)->port == PORT_A) |
| port_sel = PANEL_PORT_SELECT_DPA; |
| else |
| port_sel = PANEL_PORT_SELECT_DPD; |
| } |
| |
| pp_on |= port_sel; |
| |
| I915_WRITE(pp_on_reg, pp_on); |
| I915_WRITE(pp_off_reg, pp_off); |
| I915_WRITE(pp_div_reg, pp_div); |
| |
| DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", |
| I915_READ(pp_on_reg), |
| I915_READ(pp_off_reg), |
| I915_READ(pp_div_reg)); |
| } |
| |
| static bool intel_edp_init_connector(struct intel_dp *intel_dp, |
| struct intel_connector *intel_connector) |
| { |
| struct drm_connector *connector = &intel_connector->base; |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = intel_dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_display_mode *fixed_mode = NULL; |
| struct edp_power_seq power_seq = { 0 }; |
| bool has_dpcd; |
| struct drm_display_mode *scan; |
| struct edid *edid; |
| |
| if (!is_edp(intel_dp)) |
| return true; |
| |
| intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); |
| |
| /* Cache DPCD and EDID for edp. */ |
| ironlake_edp_panel_vdd_on(intel_dp); |
| has_dpcd = intel_dp_get_dpcd(intel_dp); |
| ironlake_edp_panel_vdd_off(intel_dp, false); |
| |
| if (has_dpcd) { |
| if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) |
| dev_priv->no_aux_handshake = |
| intel_dp->dpcd[DP_MAX_DOWNSPREAD] & |
| DP_NO_AUX_HANDSHAKE_LINK_TRAINING; |
| } else { |
| /* if this fails, presume the device is a ghost */ |
| DRM_INFO("failed to retrieve link info, disabling eDP\n"); |
| return false; |
| } |
| |
| /* We now know it's not a ghost, init power sequence regs. */ |
| intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, |
| &power_seq); |
| |
| edid = drm_get_edid(connector, &intel_dp->adapter); |
| if (edid) { |
| if (drm_add_edid_modes(connector, edid)) { |
| drm_mode_connector_update_edid_property(connector, |
| edid); |
| drm_edid_to_eld(connector, edid); |
| } else { |
| kfree(edid); |
| edid = ERR_PTR(-EINVAL); |
| } |
| } else { |
| edid = ERR_PTR(-ENOENT); |
| } |
| intel_connector->edid = edid; |
| |
| /* prefer fixed mode from EDID if available */ |
| list_for_each_entry(scan, &connector->probed_modes, head) { |
| if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { |
| fixed_mode = drm_mode_duplicate(dev, scan); |
| break; |
| } |
| } |
| |
| /* fallback to VBT if available for eDP */ |
| if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) { |
| fixed_mode = drm_mode_duplicate(dev, |
| dev_priv->vbt.lfp_lvds_vbt_mode); |
| if (fixed_mode) |
| fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; |
| } |
| |
| intel_panel_init(&intel_connector->panel, fixed_mode); |
| intel_panel_setup_backlight(connector); |
| |
| return true; |
| } |
| |
| bool |
| intel_dp_init_connector(struct intel_digital_port *intel_dig_port, |
| struct intel_connector *intel_connector) |
| { |
| struct drm_connector *connector = &intel_connector->base; |
| struct intel_dp *intel_dp = &intel_dig_port->dp; |
| struct intel_encoder *intel_encoder = &intel_dig_port->base; |
| struct drm_device *dev = intel_encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_dig_port->port; |
| const char *name = NULL; |
| int type, error; |
| |
| /* Preserve the current hw state. */ |
| intel_dp->DP = I915_READ(intel_dp->output_reg); |
| intel_dp->attached_connector = intel_connector; |
| |
| type = DRM_MODE_CONNECTOR_DisplayPort; |
| /* |
| * FIXME : We need to initialize built-in panels before external panels. |
| * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup |
| */ |
| switch (port) { |
| case PORT_A: |
| type = DRM_MODE_CONNECTOR_eDP; |
| break; |
| case PORT_C: |
| if (IS_VALLEYVIEW(dev)) |
| type = DRM_MODE_CONNECTOR_eDP; |
| break; |
| case PORT_D: |
| if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev)) |
| type = DRM_MODE_CONNECTOR_eDP; |
| break; |
| default: /* silence GCC warning */ |
| break; |
| } |
| |
| /* |
| * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but |
| * for DP the encoder type can be set by the caller to |
| * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it. |
| */ |
| if (type == DRM_MODE_CONNECTOR_eDP) |
| intel_encoder->type = INTEL_OUTPUT_EDP; |
| |
| DRM_DEBUG_KMS("Adding %s connector on port %c\n", |
| type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", |
| port_name(port)); |
| |
| drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); |
| drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); |
| |
| connector->interlace_allowed = true; |
| connector->doublescan_allowed = 0; |
| |
| INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, |
| ironlake_panel_vdd_work); |
| |
| intel_connector_attach_encoder(intel_connector, intel_encoder); |
| drm_sysfs_connector_add(connector); |
| |
| if (HAS_DDI(dev)) |
| intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; |
| else |
| intel_connector->get_hw_state = intel_connector_get_hw_state; |
| |
| intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; |
| if (HAS_DDI(dev)) { |
| switch (intel_dig_port->port) { |
| case PORT_A: |
| intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL; |
| break; |
| case PORT_B: |
| intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL; |
| break; |
| case PORT_C: |
| intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL; |
| break; |
| case PORT_D: |
| intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL; |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| /* Set up the DDC bus. */ |
| switch (port) { |
| case PORT_A: |
| intel_encoder->hpd_pin = HPD_PORT_A; |
| name = "DPDDC-A"; |
| break; |
| case PORT_B: |
| intel_encoder->hpd_pin = HPD_PORT_B; |
| name = "DPDDC-B"; |
| break; |
| case PORT_C: |
| intel_encoder->hpd_pin = HPD_PORT_C; |
| name = "DPDDC-C"; |
| break; |
| case PORT_D: |
| intel_encoder->hpd_pin = HPD_PORT_D; |
| name = "DPDDC-D"; |
| break; |
| default: |
| BUG(); |
| } |
| |
| error = intel_dp_i2c_init(intel_dp, intel_connector, name); |
| WARN(error, "intel_dp_i2c_init failed with error %d for port %c\n", |
| error, port_name(port)); |
| |
| intel_dp->psr_setup_done = false; |
| |
| if (!intel_edp_init_connector(intel_dp, intel_connector)) { |
| i2c_del_adapter(&intel_dp->adapter); |
| if (is_edp(intel_dp)) { |
| cancel_delayed_work_sync(&intel_dp->panel_vdd_work); |
| mutex_lock(&dev->mode_config.mutex); |
| ironlake_panel_vdd_off_sync(intel_dp); |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| drm_sysfs_connector_remove(connector); |
| drm_connector_cleanup(connector); |
| return false; |
| } |
| |
| intel_dp_add_properties(intel_dp, connector); |
| |
| /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written |
| * 0xd. Failure to do so will result in spurious interrupts being |
| * generated on the port when a cable is not attached. |
| */ |
| if (IS_G4X(dev) && !IS_GM45(dev)) { |
| u32 temp = I915_READ(PEG_BAND_GAP_DATA); |
| I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); |
| } |
| |
| return true; |
| } |
| |
| void |
| intel_dp_init(struct drm_device *dev, int output_reg, enum port port) |
| { |
| struct intel_digital_port *intel_dig_port; |
| struct intel_encoder *intel_encoder; |
| struct drm_encoder *encoder; |
| struct intel_connector *intel_connector; |
| |
| intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); |
| if (!intel_dig_port) |
| return; |
| |
| intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL); |
| if (!intel_connector) { |
| kfree(intel_dig_port); |
| return; |
| } |
| |
| intel_encoder = &intel_dig_port->base; |
| encoder = &intel_encoder->base; |
| |
| drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs, |
| DRM_MODE_ENCODER_TMDS); |
| |
| intel_encoder->compute_config = intel_dp_compute_config; |
| intel_encoder->mode_set = intel_dp_mode_set; |
| intel_encoder->disable = intel_disable_dp; |
| intel_encoder->post_disable = intel_post_disable_dp; |
| intel_encoder->get_hw_state = intel_dp_get_hw_state; |
| intel_encoder->get_config = intel_dp_get_config; |
| if (IS_VALLEYVIEW(dev)) { |
| intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; |
| intel_encoder->pre_enable = vlv_pre_enable_dp; |
| intel_encoder->enable = vlv_enable_dp; |
| } else { |
| intel_encoder->pre_enable = g4x_pre_enable_dp; |
| intel_encoder->enable = g4x_enable_dp; |
| } |
| |
| intel_dig_port->port = port; |
| intel_dig_port->dp.output_reg = output_reg; |
| |
| intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; |
| intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); |
| intel_encoder->cloneable = false; |
| intel_encoder->hot_plug = intel_dp_hot_plug; |
| |
| if (!intel_dp_init_connector(intel_dig_port, intel_connector)) { |
| drm_encoder_cleanup(encoder); |
| kfree(intel_dig_port); |
| kfree(intel_connector); |
| } |
| } |