ARM: OMAP: Make FS USB omap1 only
As the FS USB code is not being actively used for omap2+
there's no point keeping it around for omap2+.
Let's make the FS USB platform init code omap1 only so
we can remove the last user of omap_read/write for omap2+,
and simplify things for further USB, DMA, and device tree
related work.
While at it, also group the mach includes for the related
drivers.
Cc: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e61afd9..65f8817 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -27,7 +27,8 @@
#include <asm/irq.h>
#include <plat/mux.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
#include "common.h"
@@ -55,6 +56,119 @@
#define INT_USB_IRQ_HGEN INT_USB_HHC_1
#define INT_USB_IRQ_OTG IH2_BASE + 8
+#ifdef CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+ u32 syscon;
+ int alt_pingroup = 0;
+
+ /* NOTE: no bus or clock setup (yet?) */
+
+ syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
+ if (!(syscon & OTG_RESET_DONE))
+ pr_debug("USB resets not complete?\n");
+
+ //omap_writew(0, OTG_IRQ_EN);
+
+ /* pin muxing and transceiver pinouts */
+ if (config->pins[0] > 2) /* alt pingroup 2 */
+ alt_pingroup = 1;
+ syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+ syscon |= config->usb1_init(config->pins[1]);
+ syscon |= config->usb2_init(config->pins[2], alt_pingroup);
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+
+ syscon = config->hmc_mode;
+ syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef CONFIG_USB_OTG
+ if (config->otg)
+ syscon |= OTG_EN;
+#endif
+ if (cpu_class_is_omap1())
+ pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+ omap_readl(USB_TRANSCEIVER_CTRL));
+ pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+ omap_writel(syscon, OTG_SYSCON_2);
+
+ printk("USB: hmc %d", config->hmc_mode);
+ if (!alt_pingroup)
+ printk(", usb2 alt %d wires", config->pins[2]);
+ else if (config->pins[0])
+ printk(", usb0 %d wires%s", config->pins[0],
+ is_usb0_device(config) ? " (dev)" : "");
+ if (config->pins[1])
+ printk(", usb1 %d wires", config->pins[1]);
+ if (!alt_pingroup && config->pins[2])
+ printk(", usb2 %d wires", config->pins[2]);
+ if (config->otg)
+ printk(", Mini-AB on usb%d", config->otg - 1);
+ printk("\n");
+
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ /* leave USB clocks/controllers off until needed */
+ w = omap_readw(ULPD_SOFT_REQ);
+ w &= ~SOFT_USB_CLK_REQ;
+ omap_writew(w, ULPD_SOFT_REQ);
+
+ w = omap_readw(ULPD_CLOCK_CTRL);
+ w &= ~USB_MCLK_EN;
+ w |= DIS_USB_PVCI_CLK;
+ omap_writew(w, ULPD_CLOCK_CTRL);
+ }
+ syscon = omap_readl(OTG_SYSCON_1);
+ syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ if (config->otg || config->register_dev) {
+ struct platform_device *udc_device = config->udc_device;
+ int status;
+
+ syscon &= ~DEV_IDLE_EN;
+ udc_device->dev.platform_data = config;
+ status = platform_device_register(udc_device);
+ if (status)
+ pr_debug("can't register UDC device, %d\n", status);
+ }
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ if (config->otg || config->register_host) {
+ struct platform_device *ohci_device = config->ohci_device;
+ int status;
+
+ syscon &= ~HST_IDLE_EN;
+ ohci_device->dev.platform_data = config;
+ status = platform_device_register(ohci_device);
+ if (status)
+ pr_debug("can't register OHCI device, %d\n", status);
+ }
+#endif
+
+#ifdef CONFIG_USB_OTG
+ if (config->otg) {
+ struct platform_device *otg_device = config->otg_device;
+ int status;
+
+ syscon &= ~OTG_IDLE_EN;
+ otg_device->dev.platform_data = config;
+ status = platform_device_register(otg_device);
+ if (status)
+ pr_debug("can't register OTG device, %d\n", status);
+ }
+#endif
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+}
+
+#else
+void omap_otg_init(struct omap_usb_config *config) {}
+#endif
+
#ifdef CONFIG_USB_GADGET_OMAP
static struct resource udc_resources[] = {