ARM: mvebu: Move kirkwood DT boards into mach-mvebu
Move the kirkwood DT support into mach-mvebu, and make them part of
ARCH_MULTI_V5. Minimal changes have been made in order to make it
boot. Cleanup of the header files and integration with mvebu will
take place in following patches.
In order to help Debian transition between mach-kirkwood and
mach-mvebu, the DTS files are compiled for both, allowing Debian to
continue using mach-kirkwood until all remaining boards are supported
by mach-mvebu. Debian is then expected to simply swap from
mach-kirkwood to mach-mvebu and mach-kirkwood will be removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b..e1351829 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -81,8 +81,8 @@
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+kirkwood := \
+ kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
kirkwood-dns320.dtb \
@@ -116,6 +116,8 @@
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
@@ -131,7 +133,8 @@
armada-xp-gp.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-matrix.dtb \
- armada-xp-openblocks-ax3-4.dtb
+ armada-xp-openblocks-ax3-4.dtb \
+ $(kirkwood)
dtb-$(CONFIG_ARCH_MXC) += \
imx25-karo-tx25.dtb \
imx25-pdk.dtb \
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 6c0824e..2d7af55 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,5 @@
config ARCH_MVEBU
- bool "Marvell Engineering Business Unit (MVEBU) SoCs" if ARCH_MULTI_V7
+ bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select COMMON_CLK
@@ -46,6 +46,23 @@
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada XP SoC with device tree.
+config MACH_KIRKWOOD
+ bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select KIRKWOOD_CLK
+ select OF_IRQ
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PCI
+ select PCI_QUIRKS
+ select PINCTRL_KIRKWOOD
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Kirkwood device tree.
+
endmenu
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index d998461..6809ec7 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
diff --git a/arch/arm/mach-mvebu/include/mach/bridge-regs.h b/arch/arm/mach-mvebu/include/mach/bridge-regs.h
new file mode 100644
index 0000000..6eb8fea
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/bridge-regs.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-mvebu/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
+
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
+#define CGC_BIT_GE0 (0)
+#define CGC_BIT_PEX0 (2)
+#define CGC_BIT_USB0 (3)
+#define CGC_BIT_SDIO (4)
+#define CGC_BIT_TSU (5)
+#define CGC_BIT_DUNIT (6)
+#define CGC_BIT_RUNIT (7)
+#define CGC_BIT_XOR0 (8)
+#define CGC_BIT_AUDIO (9)
+#define CGC_BIT_SATA0 (14)
+#define CGC_BIT_SATA1 (15)
+#define CGC_BIT_XOR1 (16)
+#define CGC_BIT_CRYPTO (17)
+#define CGC_BIT_PEX1 (18)
+#define CGC_BIT_GE1 (19)
+#define CGC_BIT_TDM (20)
+#define CGC_GE0 (1 << 0)
+#define CGC_PEX0 (1 << 2)
+#define CGC_USB0 (1 << 3)
+#define CGC_SDIO (1 << 4)
+#define CGC_TSU (1 << 5)
+#define CGC_DUNIT (1 << 6)
+#define CGC_RUNIT (1 << 7)
+#define CGC_XOR0 (1 << 8)
+#define CGC_AUDIO (1 << 9)
+#define CGC_POWERSAVE (1 << 11)
+#define CGC_SATA0 (1 << 14)
+#define CGC_SATA1 (1 << 15)
+#define CGC_XOR1 (1 << 16)
+#define CGC_CRYPTO (1 << 17)
+#define CGC_PEX1 (1 << 18)
+#define CGC_GE1 (1 << 19)
+#define CGC_TDM (1 << 20)
+#define CGC_RESERVED (0x6 << 21)
+
+#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
+
+#endif
diff --git a/arch/arm/mach-mvebu/include/mach/kirkwood.h b/arch/arm/mach-mvebu/include/mach/kirkwood.h
new file mode 100644
index 0000000..9d966dc
--- /dev/null
+++ b/arch/arm/mach-mvebu/include/mach/kirkwood.h
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-mvebu/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe #0 Memory space
+ * e8000000 PCIe #1 Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe #0 I/O space
+ * f3000000 PCIe #1 I/O space
+ * f4000000 NAND controller address window
+ * f5000000 Security Accelerator SRAM
+ *
+ * virt phys size
+ * fed00000 f1000000 1M on-chip peripheral registers
+ * fee00000 f2000000 1M PCIe #0 I/O space
+ * fef00000 f3000000 1M PCIe #1 I/O space
+ */
+
+#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
+#define KIRKWOOD_SRAM_SIZE SZ_2K
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
+
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU_SZ (0x20)
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
+#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
+
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
+
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+#define MV88F6281_REV_A1 3
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+#define MV88F6192_REV_A1 3
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
+#define MV88F6180_REV_A1 3
+
+#define MV88F6282_DEV_ID 0x6282
+#define MV88F6282_REV_A0 0
+#define MV88F6282_REV_A1 1
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 0000000..b8c8365
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(memory_pm_ctrl);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, memory_pm_ctrl);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+ suspend_set_ops(&kirkwood_suspend_ops);
+ return 0;
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 0000000..21e7530
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 0000000..6e754a3
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
+#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
+#include <plat/common.h>
+#include <plat/pcie.h>
+#include "kirkwood-pm.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_disable_mbus_error_propagation();
+
+ BUG_ON(mvebu_mbus_dt_init());
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
+ kirkwood_cpufreq_init();
+ kirkwood_cpuidle_init();
+
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+ "marvell,kirkwood",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+ .init_machine = kirkwood_dt_init,
+ .restart = kirkwood_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END