| /* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */ |
| /* |
| Written 1996 by Russell Nelson, with reference to skeleton.c |
| written 1993-1994 by Donald Becker. |
| |
| This software may be used and distributed according to the terms |
| of the GNU General Public License, incorporated herein by reference. |
| |
| The author may be reached at nelson@crynwr.com, Crynwr |
| Software, 11 Grant St., Potsdam, NY 13676 |
| |
| Changelog: |
| |
| Mike Cruse : mcruse@cti-ltd.com |
| : Changes for Linux 2.0 compatibility. |
| : Added dev_id parameter in net_interrupt(), |
| : request_irq() and free_irq(). Just NULL for now. |
| |
| Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros |
| : in net_open() and net_close() so kerneld would know |
| : that the module is in use and wouldn't eject the |
| : driver prematurely. |
| |
| Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c |
| : as an example. Disabled autoprobing in init_module(), |
| : not a good thing to do to other devices while Linux |
| : is running from all accounts. |
| |
| Alan Cox : Removed 1.2 support, added 2.1 extra counters. |
| |
| David Huggins-Daines <dhd@debian.org> |
| |
| Split this off into mac89x0.c, and gutted it of all parts which are |
| not relevant to the existing CS8900 cards on the Macintosh |
| (i.e. basically the Daynaport CS and LC cards). To be precise: |
| |
| * Removed all the media-detection stuff, because these cards are |
| TP-only. |
| |
| * Lobotomized the ISA interrupt bogosity, because these cards use |
| a hardwired NuBus interrupt and a magic ISAIRQ value in the card. |
| |
| * Basically eliminated everything not relevant to getting the |
| cards minimally functioning on the Macintosh. |
| |
| I might add that these cards are badly designed even from the Mac |
| standpoint, in that Dayna, in their infinite wisdom, used NuBus slot |
| I/O space and NuBus interrupts for these cards, but neglected to |
| provide anything even remotely resembling a NuBus ROM. Therefore we |
| have to probe for them in a brain-damaged ISA-like fashion. |
| |
| Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001 |
| check kmalloc and release the allocated memory on failure in |
| mac89x0_probe and in init_module |
| use local_irq_{save,restore}(flags) in net_get_stat, not just |
| local_irq_{dis,en}able() |
| */ |
| |
| static char *version = |
| "cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n"; |
| |
| /* ======================= configure the driver here ======================= */ |
| |
| /* use 0 for production, 1 for verification, >2 for debug */ |
| #ifndef NET_DEBUG |
| #define NET_DEBUG 0 |
| #endif |
| |
| /* ======================= end of configuration ======================= */ |
| |
| |
| /* Always include 'config.h' first in case the user wants to turn on |
| or override something. */ |
| #include <linux/module.h> |
| |
| #define PRINTK(x) printk x |
| |
| /* |
| Sources: |
| |
| Crynwr packet driver epktisa. |
| |
| Crystal Semiconductor data sheets. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/nubus.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| |
| #include <asm/system.h> |
| #include <asm/bitops.h> |
| #include <asm/io.h> |
| #include <asm/hwtest.h> |
| #include <asm/macints.h> |
| |
| #include "cs89x0.h" |
| |
| static unsigned int net_debug = NET_DEBUG; |
| |
| /* Information that need to be kept for each board. */ |
| struct net_local { |
| struct net_device_stats stats; |
| int chip_type; /* one of: CS8900, CS8920, CS8920M */ |
| char chip_revision; /* revision letter of the chip ('A'...) */ |
| int send_cmd; /* the propercommand used to send a packet. */ |
| int rx_mode; |
| int curr_rx_cfg; |
| int send_underrun; /* keep track of how many underruns in a row we get */ |
| struct sk_buff *skb; |
| }; |
| |
| /* Index to functions, as function prototypes. */ |
| |
| #if 0 |
| extern void reset_chip(struct net_device *dev); |
| #endif |
| static int net_open(struct net_device *dev); |
| static int net_send_packet(struct sk_buff *skb, struct net_device *dev); |
| static irqreturn_t net_interrupt(int irq, void *dev_id); |
| static void set_multicast_list(struct net_device *dev); |
| static void net_rx(struct net_device *dev); |
| static int net_close(struct net_device *dev); |
| static struct net_device_stats *net_get_stats(struct net_device *dev); |
| static int set_mac_address(struct net_device *dev, void *addr); |
| |
| |
| /* Example routines you must write ;->. */ |
| #define tx_done(dev) 1 |
| |
| /* For reading/writing registers ISA-style */ |
| static inline int |
| readreg_io(struct net_device *dev, int portno) |
| { |
| nubus_writew(swab16(portno), dev->base_addr + ADD_PORT); |
| return swab16(nubus_readw(dev->base_addr + DATA_PORT)); |
| } |
| |
| static inline void |
| writereg_io(struct net_device *dev, int portno, int value) |
| { |
| nubus_writew(swab16(portno), dev->base_addr + ADD_PORT); |
| nubus_writew(swab16(value), dev->base_addr + DATA_PORT); |
| } |
| |
| /* These are for reading/writing registers in shared memory */ |
| static inline int |
| readreg(struct net_device *dev, int portno) |
| { |
| return swab16(nubus_readw(dev->mem_start + portno)); |
| } |
| |
| static inline void |
| writereg(struct net_device *dev, int portno, int value) |
| { |
| nubus_writew(swab16(value), dev->mem_start + portno); |
| } |
| |
| /* Probe for the CS8900 card in slot E. We won't bother looking |
| anywhere else until we have a really good reason to do so. */ |
| struct net_device * __init mac89x0_probe(int unit) |
| { |
| struct net_device *dev; |
| static int once_is_enough; |
| struct net_local *lp; |
| static unsigned version_printed; |
| int i, slot; |
| unsigned rev_type = 0; |
| unsigned long ioaddr; |
| unsigned short sig; |
| int err = -ENODEV; |
| |
| dev = alloc_etherdev(sizeof(struct net_local)); |
| if (!dev) |
| return ERR_PTR(-ENOMEM); |
| |
| if (unit >= 0) { |
| sprintf(dev->name, "eth%d", unit); |
| netdev_boot_setup_check(dev); |
| } |
| |
| SET_MODULE_OWNER(dev); |
| |
| if (once_is_enough) |
| goto out; |
| once_is_enough = 1; |
| |
| /* We might have to parameterize this later */ |
| slot = 0xE; |
| /* Get out now if there's a real NuBus card in slot E */ |
| if (nubus_find_slot(slot, NULL) != NULL) |
| goto out; |
| |
| /* The pseudo-ISA bits always live at offset 0x300 (gee, |
| wonder why...) */ |
| ioaddr = (unsigned long) |
| nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE); |
| { |
| unsigned long flags; |
| int card_present; |
| |
| local_irq_save(flags); |
| card_present = hwreg_present((void*) ioaddr+4) |
| && hwreg_present((void*) ioaddr + DATA_PORT); |
| local_irq_restore(flags); |
| |
| if (!card_present) |
| goto out; |
| } |
| |
| nubus_writew(0, ioaddr + ADD_PORT); |
| sig = nubus_readw(ioaddr + DATA_PORT); |
| if (sig != swab16(CHIP_EISA_ID_SIG)) |
| goto out; |
| |
| /* Initialize the net_device structure. */ |
| lp = netdev_priv(dev); |
| |
| /* Fill in the 'dev' fields. */ |
| dev->base_addr = ioaddr; |
| dev->mem_start = (unsigned long) |
| nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE); |
| dev->mem_end = dev->mem_start + 0x1000; |
| |
| /* Turn on shared memory */ |
| writereg_io(dev, PP_BusCTL, MEMORY_ON); |
| |
| /* get the chip type */ |
| rev_type = readreg(dev, PRODUCT_ID_ADD); |
| lp->chip_type = rev_type &~ REVISON_BITS; |
| lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; |
| |
| /* Check the chip type and revision in order to set the correct send command |
| CS8920 revision C and CS8900 revision F can use the faster send. */ |
| lp->send_cmd = TX_AFTER_381; |
| if (lp->chip_type == CS8900 && lp->chip_revision >= 'F') |
| lp->send_cmd = TX_NOW; |
| if (lp->chip_type != CS8900 && lp->chip_revision >= 'C') |
| lp->send_cmd = TX_NOW; |
| |
| if (net_debug && version_printed++ == 0) |
| printk(version); |
| |
| printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx", |
| dev->name, |
| lp->chip_type==CS8900?'0':'2', |
| lp->chip_type==CS8920M?"M":"", |
| lp->chip_revision, |
| dev->base_addr); |
| |
| /* Try to read the MAC address */ |
| if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) { |
| printk("\nmac89x0: No EEPROM, giving up now.\n"); |
| goto out1; |
| } else { |
| for (i = 0; i < ETH_ALEN; i += 2) { |
| /* Big-endian (why??!) */ |
| unsigned short s = readreg(dev, PP_IA + i); |
| dev->dev_addr[i] = s >> 8; |
| dev->dev_addr[i+1] = s & 0xff; |
| } |
| } |
| |
| dev->irq = SLOT2IRQ(slot); |
| printk(" IRQ %d ADDR ", dev->irq); |
| |
| /* print the ethernet address. */ |
| for (i = 0; i < ETH_ALEN; i++) |
| printk("%2.2x%s", dev->dev_addr[i], |
| ((i < ETH_ALEN-1) ? ":" : "")); |
| printk("\n"); |
| |
| dev->open = net_open; |
| dev->stop = net_close; |
| dev->hard_start_xmit = net_send_packet; |
| dev->get_stats = net_get_stats; |
| dev->set_multicast_list = &set_multicast_list; |
| dev->set_mac_address = &set_mac_address; |
| |
| err = register_netdev(dev); |
| if (err) |
| goto out1; |
| return 0; |
| out1: |
| nubus_writew(0, dev->base_addr + ADD_PORT); |
| out: |
| free_netdev(dev); |
| return ERR_PTR(err); |
| } |
| |
| #if 0 |
| /* This is useful for something, but I don't know what yet. */ |
| void __init reset_chip(struct net_device *dev) |
| { |
| int reset_start_time; |
| |
| writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); |
| |
| /* wait 30 ms */ |
| msleep_interruptible(30); |
| |
| /* Wait until the chip is reset */ |
| reset_start_time = jiffies; |
| while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) |
| ; |
| } |
| #endif |
| |
| /* Open/initialize the board. This is called (in the current kernel) |
| sometime after booting when the 'ifconfig' program is run. |
| |
| This routine should set everything up anew at each open, even |
| registers that "should" only need to be set once at boot, so that |
| there is non-reboot way to recover if something goes wrong. |
| */ |
| static int |
| net_open(struct net_device *dev) |
| { |
| struct net_local *lp = netdev_priv(dev); |
| int i; |
| |
| /* Disable the interrupt for now */ |
| writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ); |
| |
| /* Grab the interrupt */ |
| if (request_irq(dev->irq, &net_interrupt, 0, "cs89x0", dev)) |
| return -EAGAIN; |
| |
| /* Set up the IRQ - Apparently magic */ |
| if (lp->chip_type == CS8900) |
| writereg(dev, PP_CS8900_ISAINT, 0); |
| else |
| writereg(dev, PP_CS8920_ISAINT, 0); |
| |
| /* set the Ethernet address */ |
| for (i=0; i < ETH_ALEN/2; i++) |
| writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); |
| |
| /* Turn on both receive and transmit operations */ |
| writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON); |
| |
| /* Receive only error free packets addressed to this card */ |
| lp->rx_mode = 0; |
| writereg(dev, PP_RxCTL, DEF_RX_ACCEPT); |
| |
| lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL; |
| |
| writereg(dev, PP_RxCFG, lp->curr_rx_cfg); |
| |
| writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL | |
| TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL); |
| |
| writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL | |
| TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL); |
| |
| /* now that we've got our act together, enable everything */ |
| writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ); |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| static int |
| net_send_packet(struct sk_buff *skb, struct net_device *dev) |
| { |
| if (dev->tbusy) { |
| /* If we get here, some higher level has decided we are broken. |
| There should really be a "kick me" function call instead. */ |
| int tickssofar = jiffies - dev->trans_start; |
| if (tickssofar < 5) |
| return 1; |
| if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name, |
| tx_done(dev) ? "IRQ conflict" : "network cable problem"); |
| /* Try to restart the adaptor. */ |
| dev->tbusy=0; |
| dev->trans_start = jiffies; |
| } |
| |
| /* Block a timer-based transmit from overlapping. This could better be |
| done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */ |
| if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) |
| printk("%s: Transmitter access conflict.\n", dev->name); |
| else { |
| struct net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (net_debug > 3) |
| printk("%s: sent %d byte packet of type %x\n", |
| dev->name, skb->len, |
| (skb->data[ETH_ALEN+ETH_ALEN] << 8) |
| | skb->data[ETH_ALEN+ETH_ALEN+1]); |
| |
| /* keep the upload from being interrupted, since we |
| ask the chip to start transmitting before the |
| whole packet has been completely uploaded. */ |
| local_irq_save(flags); |
| |
| /* initiate a transmit sequence */ |
| writereg(dev, PP_TxCMD, lp->send_cmd); |
| writereg(dev, PP_TxLength, skb->len); |
| |
| /* Test to see if the chip has allocated memory for the packet */ |
| if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) { |
| /* Gasp! It hasn't. But that shouldn't happen since |
| we're waiting for TxOk, so return 1 and requeue this packet. */ |
| local_irq_restore(flags); |
| return 1; |
| } |
| |
| /* Write the contents of the packet */ |
| memcpy_toio(dev->mem_start + PP_TxFrame, skb->data, skb->len+1); |
| |
| local_irq_restore(flags); |
| dev->trans_start = jiffies; |
| } |
| dev_kfree_skb (skb); |
| |
| return 0; |
| } |
| |
| /* The typical workload of the driver: |
| Handle the network interface interrupts. */ |
| static irqreturn_t net_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct net_local *lp; |
| int ioaddr, status; |
| |
| if (dev == NULL) { |
| printk ("net_interrupt(): irq %d for unknown device.\n", irq); |
| return IRQ_NONE; |
| } |
| if (dev->interrupt) |
| printk("%s: Re-entering the interrupt handler.\n", dev->name); |
| dev->interrupt = 1; |
| |
| ioaddr = dev->base_addr; |
| lp = netdev_priv(dev); |
| |
| /* we MUST read all the events out of the ISQ, otherwise we'll never |
| get interrupted again. As a consequence, we can't have any limit |
| on the number of times we loop in the interrupt handler. The |
| hardware guarantees that eventually we'll run out of events. Of |
| course, if you're on a slow machine, and packets are arriving |
| faster than you can read them off, you're screwed. Hasta la |
| vista, baby! */ |
| while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) { |
| if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status); |
| switch(status & ISQ_EVENT_MASK) { |
| case ISQ_RECEIVER_EVENT: |
| /* Got a packet(s). */ |
| net_rx(dev); |
| break; |
| case ISQ_TRANSMITTER_EVENT: |
| lp->stats.tx_packets++; |
| dev->tbusy = 0; |
| mark_bh(NET_BH); /* Inform upper layers. */ |
| if ((status & TX_OK) == 0) lp->stats.tx_errors++; |
| if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++; |
| if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++; |
| if (status & TX_LATE_COL) lp->stats.tx_window_errors++; |
| if (status & TX_16_COL) lp->stats.tx_aborted_errors++; |
| break; |
| case ISQ_BUFFER_EVENT: |
| if (status & READY_FOR_TX) { |
| /* we tried to transmit a packet earlier, |
| but inexplicably ran out of buffers. |
| That shouldn't happen since we only ever |
| load one packet. Shrug. Do the right |
| thing anyway. */ |
| dev->tbusy = 0; |
| mark_bh(NET_BH); /* Inform upper layers. */ |
| } |
| if (status & TX_UNDERRUN) { |
| if (net_debug > 0) printk("%s: transmit underrun\n", dev->name); |
| lp->send_underrun++; |
| if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381; |
| else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL; |
| } |
| break; |
| case ISQ_RX_MISS_EVENT: |
| lp->stats.rx_missed_errors += (status >>6); |
| break; |
| case ISQ_TX_COL_EVENT: |
| lp->stats.collisions += (status >>6); |
| break; |
| } |
| } |
| dev->interrupt = 0; |
| return IRQ_HANDLED; |
| } |
| |
| /* We have a good packet(s), get it/them out of the buffers. */ |
| static void |
| net_rx(struct net_device *dev) |
| { |
| struct net_local *lp = netdev_priv(dev); |
| struct sk_buff *skb; |
| int status, length; |
| |
| status = readreg(dev, PP_RxStatus); |
| if ((status & RX_OK) == 0) { |
| lp->stats.rx_errors++; |
| if (status & RX_RUNT) lp->stats.rx_length_errors++; |
| if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++; |
| if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT))) |
| /* per str 172 */ |
| lp->stats.rx_crc_errors++; |
| if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++; |
| return; |
| } |
| |
| length = readreg(dev, PP_RxLength); |
| /* Malloc up new buffer. */ |
| skb = alloc_skb(length, GFP_ATOMIC); |
| if (skb == NULL) { |
| printk("%s: Memory squeeze, dropping packet.\n", dev->name); |
| lp->stats.rx_dropped++; |
| return; |
| } |
| skb_put(skb, length); |
| |
| memcpy_fromio(skb->data, dev->mem_start + PP_RxFrame, length); |
| |
| if (net_debug > 3)printk("%s: received %d byte packet of type %x\n", |
| dev->name, length, |
| (skb->data[ETH_ALEN+ETH_ALEN] << 8) |
| | skb->data[ETH_ALEN+ETH_ALEN+1]); |
| |
| skb->protocol=eth_type_trans(skb,dev); |
| netif_rx(skb); |
| dev->last_rx = jiffies; |
| lp->stats.rx_packets++; |
| lp->stats.rx_bytes += length; |
| } |
| |
| /* The inverse routine to net_open(). */ |
| static int |
| net_close(struct net_device *dev) |
| { |
| |
| writereg(dev, PP_RxCFG, 0); |
| writereg(dev, PP_TxCFG, 0); |
| writereg(dev, PP_BufCFG, 0); |
| writereg(dev, PP_BusCTL, 0); |
| |
| netif_stop_queue(dev); |
| |
| free_irq(dev->irq, dev); |
| |
| /* Update the statistics here. */ |
| |
| return 0; |
| |
| } |
| |
| /* Get the current statistics. This may be called with the card open or |
| closed. */ |
| static struct net_device_stats * |
| net_get_stats(struct net_device *dev) |
| { |
| struct net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| /* Update the statistics from the device registers. */ |
| lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6); |
| lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6); |
| local_irq_restore(flags); |
| |
| return &lp->stats; |
| } |
| |
| static void set_multicast_list(struct net_device *dev) |
| { |
| struct net_local *lp = netdev_priv(dev); |
| |
| if(dev->flags&IFF_PROMISC) |
| { |
| lp->rx_mode = RX_ALL_ACCEPT; |
| } |
| else if((dev->flags&IFF_ALLMULTI)||dev->mc_list) |
| { |
| /* The multicast-accept list is initialized to accept-all, and we |
| rely on higher-level filtering for now. */ |
| lp->rx_mode = RX_MULTCAST_ACCEPT; |
| } |
| else |
| lp->rx_mode = 0; |
| |
| writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode); |
| |
| /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */ |
| writereg(dev, PP_RxCFG, lp->curr_rx_cfg | |
| (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0)); |
| } |
| |
| |
| static int set_mac_address(struct net_device *dev, void *addr) |
| { |
| int i; |
| if (dev->start) |
| return -EBUSY; |
| printk("%s: Setting MAC address to ", dev->name); |
| for (i = 0; i < 6; i++) |
| printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]); |
| printk(".\n"); |
| /* set the Ethernet address */ |
| for (i=0; i < ETH_ALEN/2; i++) |
| writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); |
| |
| return 0; |
| } |
| |
| #ifdef MODULE |
| |
| static struct net_device *dev_cs89x0; |
| static int debug; |
| |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)"); |
| MODULE_LICENSE("GPL"); |
| |
| int |
| init_module(void) |
| { |
| net_debug = debug; |
| dev_cs89x0 = mac89x0_probe(-1); |
| if (IS_ERR(dev_cs89x0)) { |
| printk(KERN_WARNING "mac89x0.c: No card found\n"); |
| return PTR_ERR(dev_cs89x0); |
| } |
| return 0; |
| } |
| |
| void |
| cleanup_module(void) |
| { |
| unregister_netdev(dev_cs89x0); |
| nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT); |
| free_netdev(dev_cs89x0); |
| } |
| #endif /* MODULE */ |
| |
| /* |
| * Local variables: |
| * compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c -o mac89x0.o mac89x0.c" |
| * version-control: t |
| * kept-new-versions: 5 |
| * c-indent-level: 8 |
| * tab-width: 8 |
| * End: |
| * |
| */ |