irq_domain/powerpc: Use common irq_domain structure instead of irq_host
This patch drops the powerpc-specific irq_host structures and uses the common
irq_domain strucutres defined in linux/irqdomain.h. It also fixes all
the users to use the new structure names.
Renaming irq_host to irq_domain has been discussed for a long time, and this
patch is a step in the process of generalizing the powerpc virq code to be
usable by all architecture.
An astute reader will notice that this patch actually removes the irq_host
structure instead of renaming it. This is because the irq_domain structure
already exists in include/linux/irqdomain.h and has the needed data members.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index c0e1bc3..cb06b39 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -9,6 +9,7 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/irqdomain.h>
#include <linux/threads.h>
#include <linux/list.h>
#include <linux/radix-tree.h>
@@ -41,20 +42,7 @@
/* Same thing, used by the generic IRQ code */
#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
+/*
* The host code and data structures are fairly agnostic to the fact that
* we use an open firmware device-tree. We do have references to struct
* device_node in two places: in irq_find_host() to find the host matching
@@ -66,90 +54,32 @@
* by some sort of arch-specific void * "token" used to identify interrupt
* controllers.
*/
-struct irq_host;
-struct radix_tree_root;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
- /* Match an interrupt controller device node to a host, returns
- * 1 on a match
- */
- int (*match)(struct irq_host *h, struct device_node *node);
-
- /* Create or update a mapping between a virtual irq number and a hw
- * irq number. This is called only once for a given mapping.
- */
- int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
- /* Dispose of such a mapping */
- void (*unmap)(struct irq_host *h, unsigned int virq);
-
- /* Translate device-tree interrupt specifier from raw format coming
- * from the firmware to a irq_hw_number_t (interrupt line number) and
- * type (sense) that can be passed to set_irq_type(). In the absence
- * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
- * will return the hw number in the first cell and IRQ_TYPE_NONE for
- * the type (which amount to keeping whatever default value the
- * interrupt controller has for that line)
- */
- int (*xlate)(struct irq_host *h, struct device_node *ctrler,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
- struct list_head link;
-
- /* type of reverse mapping technique */
- unsigned int revmap_type;
-#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE 3 /* radix tree */
- union {
- struct {
- unsigned int size;
- unsigned int *revmap;
- } linear;
- struct radix_tree_root tree;
- } revmap_data;
- struct irq_host_ops *ops;
- void *host_data;
- irq_hw_number_t inval_irq;
-
- /* Optional device node pointer */
- struct device_node *of_node;
-};
struct irq_data;
extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
-extern bool virq_is_host(unsigned int virq, struct irq_host *host);
+extern bool virq_is_host(unsigned int virq, struct irq_domain *host);
/**
- * irq_alloc_host - Allocate a new irq_host data structure
+ * irq_alloc_host - Allocate a new irq_domain data structure
* @of_node: optional device-tree node of the interrupt controller
* @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @revmap_arg: for IRQ_DOMAIN_MAP_LINEAR linear only: size of the map
* @ops: map/unmap host callbacks
* @inval_irq: provide a hw number in that host space that is always invalid
*
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * Allocates and initialize and irq_domain structure. Note that in the case of
+ * IRQ_DOMAIN_MAP_LEGACY, the map() callback will be called before this returns
* for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * a legacy controller). For a IRQ_DOMAIN_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_DOMAIN_MAP_TREE, the radix tree will be allocated
* later during boot automatically (the reverse mapping will use the slow path
* until that happens).
*/
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+extern struct irq_domain *irq_alloc_host(struct device_node *of_node,
unsigned int revmap_type,
unsigned int revmap_arg,
- struct irq_host_ops *ops,
+ struct irq_domain_ops *ops,
irq_hw_number_t inval_irq);
@@ -157,7 +87,7 @@
* irq_find_host - Locates a host for a given device node
* @node: device-tree node of the interrupt controller
*/
-extern struct irq_host *irq_find_host(struct device_node *node);
+extern struct irq_domain *irq_find_host(struct device_node *node);
/**
@@ -169,7 +99,7 @@
* platforms that want to manipulate a few hard coded interrupt numbers that
* aren't properly represented in the device-tree.
*/
-extern void irq_set_default_host(struct irq_host *host);
+extern void irq_set_default_host(struct irq_domain *host);
/**
@@ -192,7 +122,7 @@
* If the sense/trigger is to be specified, set_irq_type() should be called
* on the number returned from that call.
*/
-extern unsigned int irq_create_mapping(struct irq_host *host,
+extern unsigned int irq_create_mapping(struct irq_domain *host,
irq_hw_number_t hwirq);
@@ -211,7 +141,7 @@
* irq controller implementation directly calls the appropriate low level
* mapping function.
*/
-extern unsigned int irq_find_mapping(struct irq_host *host,
+extern unsigned int irq_find_mapping(struct irq_domain *host,
irq_hw_number_t hwirq);
/**
@@ -222,7 +152,7 @@
* interrupt numbers they generate. In such a case it's simplest to use
* the linux virq as the hardware interrupt number.
*/
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
+extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
/**
* irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
@@ -233,7 +163,7 @@
* This is for use by irq controllers that use a radix tree reverse
* mapping for fast lookup.
*/
-extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
+extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
irq_hw_number_t hwirq);
/**
@@ -244,7 +174,7 @@
* This is a fast path, for use by irq controller code that uses radix tree
* revmaps
*/
-extern unsigned int irq_radix_revmap_lookup(struct irq_host *host,
+extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
irq_hw_number_t hwirq);
/**
@@ -257,7 +187,7 @@
* yet and will create the revmap entry with appropriate locking
*/
-extern unsigned int irq_linear_revmap(struct irq_host *host,
+extern unsigned int irq_linear_revmap(struct irq_domain *host,
irq_hw_number_t hwirq);
@@ -272,7 +202,7 @@
* and that can be used by some irq controllers implementations for things
* like allocating ranges of numbers for MSIs. The revmaps are left untouched.
*/
-extern unsigned int irq_alloc_virt(struct irq_host *host,
+extern unsigned int irq_alloc_virt(struct irq_domain *host,
unsigned int count,
unsigned int hint);