ARM: mx3: Setup AIPS registers
It was observed on a mx31pdk board that audio playback only worked when the bootloader was Redboot, and
did not work when U-boot was used.
Comparing the sources of these bootloaders showed that the AIPS registers were not setup in U-boot.
Instead of relying on the bootloader to setup the AIPS registers, do it in the kernel so that audio
playback can work independantly of the bootloader being used.
Copied the AIPS settings from Redboot to the kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
index f5b7e0f..220dd6f 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/plat-mxc/cpu.c
@@ -1,5 +1,6 @@
#include <linux/module.h>
+#include <linux/io.h>
#include <mach/hardware.h>
unsigned int __mxc_cpu_type;
@@ -18,3 +19,26 @@
pr_info("CPU identified as %s, silicon rev %d.%d\n",
cpu, (srev >> 4) & 0xf, srev & 0xf);
}
+
+void __init imx_set_aips(void __iomem *base)
+{
+ unsigned int reg;
+/*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+ __raw_writel(0x77777777, base + 0x0);
+ __raw_writel(0x77777777, base + 0x4);
+
+/*
+ * Set all OPACRx to be non-bufferable, to not require
+ * supervisor privilege level for access, allow for
+ * write access and untrusted master access.
+ */
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+}