ASoC: da7219: Disable AAD if codec is not a wake-up source
Currently if AAD is enabled in the device, during system suspend
the feature remains, regardless of whether the codec is a wake-up
source or not. This means some additional power is being used
which is unnecessary, and can causes issues with some platforms'
IRQ handlers where state changes during system suspend aren't
captured.
This patch updates the driver to disable AAD during suspend, if
we're not a wake-up source, and then re-enables this on resume.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index fc27dab..2b8914d 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -797,6 +797,62 @@
/*
+ * Suspend/Resume
+ */
+
+void da7219_aad_suspend(struct snd_soc_codec *codec)
+{
+ struct da7219_priv *da7219 = snd_soc_codec_get_drvdata(codec);
+ struct da7219_aad_priv *da7219_aad = da7219->aad;
+ struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+ u8 micbias_ctrl;
+
+ if (da7219_aad->jack) {
+ /* Disable jack detection during suspend */
+ snd_soc_update_bits(codec, DA7219_ACCDET_CONFIG_1,
+ DA7219_ACCDET_EN_MASK, 0);
+
+ /*
+ * If we have a 4-pole jack inserted, then micbias will be
+ * enabled. We can disable micbias here, and keep a note to
+ * re-enable it on resume. If jack removal occurred during
+ * suspend then this will be dealt with through the IRQ handler.
+ */
+ if (da7219_aad->jack_inserted) {
+ micbias_ctrl = snd_soc_read(codec, DA7219_MICBIAS_CTRL);
+ if (micbias_ctrl & DA7219_MICBIAS1_EN_MASK) {
+ snd_soc_dapm_disable_pin(dapm, "Mic Bias");
+ snd_soc_dapm_sync(dapm);
+ da7219_aad->micbias_resume_enable = true;
+ }
+ }
+ }
+}
+
+void da7219_aad_resume(struct snd_soc_codec *codec)
+{
+ struct da7219_priv *da7219 = snd_soc_codec_get_drvdata(codec);
+ struct da7219_aad_priv *da7219_aad = da7219->aad;
+ struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+
+ if (da7219_aad->jack) {
+ /* Re-enable micbias if previously enabled for 4-pole jack */
+ if (da7219_aad->jack_inserted &&
+ da7219_aad->micbias_resume_enable) {
+ snd_soc_dapm_force_enable_pin(dapm, "Mic Bias");
+ snd_soc_dapm_sync(dapm);
+ da7219_aad->micbias_resume_enable = false;
+ }
+
+ /* Re-enable jack detection */
+ snd_soc_update_bits(codec, DA7219_ACCDET_CONFIG_1,
+ DA7219_ACCDET_EN_MASK,
+ DA7219_ACCDET_EN_MASK);
+ }
+}
+
+
+/*
* Init/Exit
*/