ASoC: sgtl5000: Fix wrong register name in restore
Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in
sgtl5000_restore_regs(), and add comment to explain the
restore order.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index f8863eb..7f4ba81 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -987,12 +987,12 @@
/* restore regular registers */
for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
- /* this regs depends on the others */
+ /* These regs should restore in particular order */
if (reg == SGTL5000_CHIP_ANA_POWER ||
reg == SGTL5000_CHIP_CLK_CTRL ||
reg == SGTL5000_CHIP_LINREG_CTRL ||
reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
- reg == SGTL5000_CHIP_CLK_CTRL)
+ reg == SGTL5000_CHIP_REF_CTRL)
continue;
snd_soc_write(codec, reg, cache[reg]);
@@ -1003,8 +1003,17 @@
snd_soc_write(codec, reg, cache[reg]);
/*
- * restore power and other regs according
- * to set_power() and set_clock()
+ * restore these regs according to the power setting sequence in
+ * sgtl5000_set_power_regs() and clock setting sequence in
+ * sgtl5000_set_clock().
+ *
+ * The order of restore is:
+ * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
+ * SGTL5000_CHIP_ANA_POWER PLL bits set
+ * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
+ * SGTL5000_CHIP_ANA_POWER LINREG_D restored
+ * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
+ * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
*/
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
cache[SGTL5000_CHIP_LINREG_CTRL]);