iwmc3200wifi: Add new Intel Wireless Multicomm 802.11 driver
This driver supports Intel's full MAC wireless multicomm 802.11 hardware.
Although the hardware is a 802.11agn device, we currently only support
802.11ag, in managed and ad-hoc mode (no AP mode for now).
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
new file mode 100644
index 0000000..3256ad2
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -0,0 +1,409 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+
+#include "iwm.h"
+#include "commands.h"
+#include "cfg80211.h"
+#include "debug.h"
+
+#define RATETAB_ENT(_rate, _rateid, _flags) \
+ { \
+ .bitrate = (_rate), \
+ .hw_value = (_rateid), \
+ .flags = (_flags), \
+ }
+
+#define CHAN2G(_channel, _freq, _flags) { \
+ .band = IEEE80211_BAND_2GHZ, \
+ .center_freq = (_freq), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+#define CHAN5G(_channel, _flags) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .center_freq = 5000 + (5 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+static struct ieee80211_rate iwm_rates[] = {
+ RATETAB_ENT(10, 0x1, 0),
+ RATETAB_ENT(20, 0x2, 0),
+ RATETAB_ENT(55, 0x4, 0),
+ RATETAB_ENT(110, 0x8, 0),
+ RATETAB_ENT(60, 0x10, 0),
+ RATETAB_ENT(90, 0x20, 0),
+ RATETAB_ENT(120, 0x40, 0),
+ RATETAB_ENT(180, 0x80, 0),
+ RATETAB_ENT(240, 0x100, 0),
+ RATETAB_ENT(360, 0x200, 0),
+ RATETAB_ENT(480, 0x400, 0),
+ RATETAB_ENT(540, 0x800, 0),
+};
+
+#define iwm_a_rates (iwm_rates + 4)
+#define iwm_a_rates_size 8
+#define iwm_g_rates (iwm_rates + 0)
+#define iwm_g_rates_size 12
+
+static struct ieee80211_channel iwm_2ghz_channels[] = {
+ CHAN2G(1, 2412, 0),
+ CHAN2G(2, 2417, 0),
+ CHAN2G(3, 2422, 0),
+ CHAN2G(4, 2427, 0),
+ CHAN2G(5, 2432, 0),
+ CHAN2G(6, 2437, 0),
+ CHAN2G(7, 2442, 0),
+ CHAN2G(8, 2447, 0),
+ CHAN2G(9, 2452, 0),
+ CHAN2G(10, 2457, 0),
+ CHAN2G(11, 2462, 0),
+ CHAN2G(12, 2467, 0),
+ CHAN2G(13, 2472, 0),
+ CHAN2G(14, 2484, 0),
+};
+
+static struct ieee80211_channel iwm_5ghz_a_channels[] = {
+ CHAN5G(34, 0), CHAN5G(36, 0),
+ CHAN5G(38, 0), CHAN5G(40, 0),
+ CHAN5G(42, 0), CHAN5G(44, 0),
+ CHAN5G(46, 0), CHAN5G(48, 0),
+ CHAN5G(52, 0), CHAN5G(56, 0),
+ CHAN5G(60, 0), CHAN5G(64, 0),
+ CHAN5G(100, 0), CHAN5G(104, 0),
+ CHAN5G(108, 0), CHAN5G(112, 0),
+ CHAN5G(116, 0), CHAN5G(120, 0),
+ CHAN5G(124, 0), CHAN5G(128, 0),
+ CHAN5G(132, 0), CHAN5G(136, 0),
+ CHAN5G(140, 0), CHAN5G(149, 0),
+ CHAN5G(153, 0), CHAN5G(157, 0),
+ CHAN5G(161, 0), CHAN5G(165, 0),
+ CHAN5G(184, 0), CHAN5G(188, 0),
+ CHAN5G(192, 0), CHAN5G(196, 0),
+ CHAN5G(200, 0), CHAN5G(204, 0),
+ CHAN5G(208, 0), CHAN5G(212, 0),
+ CHAN5G(216, 0),
+};
+
+static struct ieee80211_supported_band iwm_band_2ghz = {
+ .channels = iwm_2ghz_channels,
+ .n_channels = ARRAY_SIZE(iwm_2ghz_channels),
+ .bitrates = iwm_g_rates,
+ .n_bitrates = iwm_g_rates_size,
+};
+
+static struct ieee80211_supported_band iwm_band_5ghz = {
+ .channels = iwm_5ghz_a_channels,
+ .n_channels = ARRAY_SIZE(iwm_5ghz_a_channels),
+ .bitrates = iwm_a_rates,
+ .n_bitrates = iwm_a_rates_size,
+};
+
+int iwm_cfg80211_inform_bss(struct iwm_priv *iwm)
+{
+ struct wiphy *wiphy = iwm_to_wiphy(iwm);
+ struct iwm_bss_info *bss, *next;
+ struct iwm_umac_notif_bss_info *umac_bss;
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_channel *channel;
+ struct ieee80211_supported_band *band;
+ s32 signal;
+ int freq;
+
+ list_for_each_entry_safe(bss, next, &iwm->bss_list, node) {
+ umac_bss = bss->bss;
+ mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf);
+
+ if (umac_bss->band == UMAC_BAND_2GHZ)
+ band = wiphy->bands[IEEE80211_BAND_2GHZ];
+ else if (umac_bss->band == UMAC_BAND_5GHZ)
+ band = wiphy->bands[IEEE80211_BAND_5GHZ];
+ else {
+ IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band);
+ return -EINVAL;
+ }
+
+ freq = ieee80211_channel_to_frequency(umac_bss->channel);
+ channel = ieee80211_get_channel(wiphy, freq);
+ signal = umac_bss->rssi * 100;
+
+ if (!cfg80211_inform_bss_frame(wiphy, channel, mgmt,
+ le16_to_cpu(umac_bss->frame_len),
+ signal, GFP_KERNEL))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int iwm_cfg80211_change_iface(struct wiphy *wiphy, int ifindex,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ struct net_device *ndev;
+ struct wireless_dev *wdev;
+ struct iwm_priv *iwm;
+ u32 old_mode;
+
+ /* we're under RTNL */
+ ndev = __dev_get_by_index(&init_net, ifindex);
+ if (!ndev)
+ return -ENODEV;
+
+ wdev = ndev->ieee80211_ptr;
+ iwm = ndev_to_iwm(ndev);
+ old_mode = iwm->conf.mode;
+
+ switch (type) {
+ case NL80211_IFTYPE_STATION:
+ iwm->conf.mode = UMAC_MODE_BSS;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ iwm->conf.mode = UMAC_MODE_IBSS;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ wdev->iftype = type;
+
+ if ((old_mode == iwm->conf.mode) || !iwm->umac_profile)
+ return 0;
+
+ iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode);
+
+ if (iwm->umac_profile_active) {
+ int ret = iwm_invalidate_mlme_profile(iwm);
+ if (ret < 0)
+ IWM_ERR(iwm, "Couldn't invalidate profile\n");
+ }
+
+ return 0;
+}
+
+static int iwm_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
+ struct cfg80211_scan_request *request)
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+ int ret;
+
+ if (!test_bit(IWM_STATUS_READY, &iwm->status)) {
+ IWM_ERR(iwm, "Scan while device is not ready\n");
+ return -EIO;
+ }
+
+ if (test_bit(IWM_STATUS_SCANNING, &iwm->status)) {
+ IWM_ERR(iwm, "Scanning already\n");
+ return -EAGAIN;
+ }
+
+ if (test_bit(IWM_STATUS_SCAN_ABORTING, &iwm->status)) {
+ IWM_ERR(iwm, "Scanning being aborted\n");
+ return -EAGAIN;
+ }
+
+ set_bit(IWM_STATUS_SCANNING, &iwm->status);
+
+ ret = iwm_scan_ssids(iwm, request->ssids, request->n_ssids);
+ if (ret) {
+ clear_bit(IWM_STATUS_SCANNING, &iwm->status);
+ return ret;
+ }
+
+ iwm->scan_request = request;
+ return 0;
+}
+
+static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
+ (iwm->conf.rts_threshold != wiphy->rts_threshold)) {
+ int ret;
+
+ iwm->conf.rts_threshold = wiphy->rts_threshold;
+
+ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+ CFG_RTS_THRESHOLD,
+ iwm->conf.rts_threshold);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD &&
+ (iwm->conf.frag_threshold != wiphy->frag_threshold)) {
+ int ret;
+
+ iwm->conf.frag_threshold = wiphy->frag_threshold;
+
+ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+ CFG_FRAG_THRESHOLD,
+ iwm->conf.frag_threshold);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int iwm_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+ struct ieee80211_channel *chan = params->channel;
+ struct cfg80211_bss *bss;
+
+ if (!test_bit(IWM_STATUS_READY, &iwm->status))
+ return -EIO;
+
+ /* UMAC doesn't support creating IBSS network with specified bssid.
+ * This should be removed after we have join only mode supported. */
+ if (params->bssid)
+ return -EOPNOTSUPP;
+
+ bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+ params->ssid, params->ssid_len);
+ if (!bss) {
+ iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len);
+ schedule_timeout_interruptible(2 * HZ);
+ bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+ params->ssid, params->ssid_len);
+ }
+ /* IBSS join only mode is not supported by UMAC ATM */
+ if (bss) {
+ cfg80211_put_bss(bss);
+ return -EOPNOTSUPP;
+ }
+
+ iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
+ iwm->umac_profile->ibss.band = chan->band;
+ iwm->umac_profile->ibss.channel = iwm->channel;
+ iwm->umac_profile->ssid.ssid_len = params->ssid_len;
+ memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
+
+ if (params->bssid)
+ memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN);
+
+ return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+ if (iwm->umac_profile_active)
+ return iwm_invalidate_mlme_profile(iwm);
+
+ return 0;
+}
+
+static struct cfg80211_ops iwm_cfg80211_ops = {
+ .change_virtual_intf = iwm_cfg80211_change_iface,
+ .scan = iwm_cfg80211_scan,
+ .set_wiphy_params = iwm_cfg80211_set_wiphy_params,
+ .join_ibss = iwm_cfg80211_join_ibss,
+ .leave_ibss = iwm_cfg80211_leave_ibss,
+};
+
+struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev)
+{
+ int ret = 0;
+ struct wireless_dev *wdev;
+
+ /*
+ * We're trying to have the following memory
+ * layout:
+ *
+ * +-------------------------+
+ * | struct wiphy |
+ * +-------------------------+
+ * | struct iwm_priv |
+ * +-------------------------+
+ * | bus private data |
+ * | (e.g. iwm_priv_sdio) |
+ * +-------------------------+
+ *
+ */
+
+ wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+ if (!wdev) {
+ dev_err(dev, "Couldn't allocate wireless device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ wdev->wiphy = wiphy_new(&iwm_cfg80211_ops,
+ sizeof(struct iwm_priv) + sizeof_bus);
+ if (!wdev->wiphy) {
+ dev_err(dev, "Couldn't allocate wiphy device\n");
+ ret = -ENOMEM;
+ goto out_err_new;
+ }
+
+ set_wiphy_dev(wdev->wiphy, dev);
+ wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX;
+ wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+ wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz;
+ wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz;
+ wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ ret = wiphy_register(wdev->wiphy);
+ if (ret < 0) {
+ dev_err(dev, "Couldn't register wiphy device\n");
+ goto out_err_register;
+ }
+
+ return wdev;
+
+ out_err_register:
+ wiphy_free(wdev->wiphy);
+
+ out_err_new:
+ kfree(wdev);
+
+ return ERR_PTR(ret);
+}
+
+void iwm_wdev_free(struct iwm_priv *iwm)
+{
+ struct wireless_dev *wdev = iwm_to_wdev(iwm);
+
+ if (!wdev)
+ return;
+
+ wiphy_unregister(wdev->wiphy);
+ wiphy_free(wdev->wiphy);
+ kfree(wdev);
+}