| # |
| # Serial device configuration |
| # |
| # $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $ |
| # |
| |
| menu "Serial drivers" |
| |
| # |
| # The new 8250/16550 serial drivers |
| config SERIAL_8250 |
| tristate "8250/16550 and compatible serial support" |
| depends on (BROKEN || !(SPARC64 || SPARC32)) |
| select SERIAL_CORE |
| ---help--- |
| This selects whether you want to include the driver for the standard |
| serial ports. The standard answer is Y. People who might say N |
| here are those that are setting up dedicated Ethernet WWW/FTP |
| servers, or users that have one of the various bus mice instead of a |
| serial mouse and don't intend to use their machine's standard serial |
| port for anything. (Note that the Cyclades and Stallion multi |
| serial port drivers do not need this driver built in for them to |
| work.) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called serial. |
| [WARNING: Do not compile this driver as a module if you are using |
| non-standard serial ports, since the configuration information will |
| be lost when the driver is unloaded. This limitation may be lifted |
| in the future.] |
| |
| BTW1: If you have a mouseman serial mouse which is not recognized by |
| the X window system, try running gpm first. |
| |
| BTW2: If you intend to use a software modem (also called Winmodem) |
| under Linux, forget it. These modems are crippled and require |
| proprietary drivers which are only available under Windows. |
| |
| Most people will say Y or M here, so that they can use serial mice, |
| modems and similar devices connecting to the standard serial ports. |
| |
| config SERIAL_8250_CONSOLE |
| bool "Console on 8250/16550 and compatible serial port" |
| depends on SERIAL_8250=y |
| select SERIAL_CORE_CONSOLE |
| ---help--- |
| If you say Y here, it will be possible to use a serial port as the |
| system console (the system console is the device which receives all |
| kernel messages and warnings and which allows logins in single user |
| mode). This could be useful if some terminal or printer is connected |
| to that serial port. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyS1". (Try "man bootparam" or see the documentation of |
| your boot loader (grub or lilo or loadlin) about how to pass options |
| to the kernel at boot time.) |
| |
| If you don't have a VGA card installed and you say Y here, the |
| kernel will automatically use the first serial line, /dev/ttyS0, as |
| system console. |
| |
| If unsure, say N. |
| |
| config SERIAL_8250_CS |
| tristate "8250/16550 PCMCIA device support" |
| depends on PCMCIA && SERIAL_8250 |
| ---help--- |
| Say Y here to enable support for 16-bit PCMCIA serial devices, |
| including serial port cards, modems, and the modem functions of |
| multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are |
| credit-card size devices often used with laptops.) |
| |
| To compile this driver as a module, choose M here: the |
| module will be called serial_cs. |
| |
| If unsure, say N. |
| |
| config SERIAL_8250_ACPI |
| bool "8250/16550 device discovery via ACPI namespace" |
| default y if IA64 |
| depends on ACPI_BUS && SERIAL_8250 |
| ---help--- |
| If you wish to enable serial port discovery via the ACPI |
| namespace, say Y here. If unsure, say N. |
| |
| config SERIAL_8250_NR_UARTS |
| int "Maximum number of 8250/16550 serial ports" |
| depends on SERIAL_8250 |
| default "4" |
| help |
| Set this to the number of serial ports you want the driver |
| to support. This includes any ports discovered via ACPI or |
| PCI enumeration and any ports that may be added at run-time |
| via hot-plug, or any ISA multi-port serial cards. |
| |
| config SERIAL_8250_EXTENDED |
| bool "Extended 8250/16550 serial driver options" |
| depends on SERIAL_8250 |
| help |
| If you wish to use any non-standard features of the standard "dumb" |
| driver, say Y here. This includes HUB6 support, shared serial |
| interrupts, special multiport support, support for more than the |
| four COM 1/2/3/4 boards, etc. |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about serial driver options. If unsure, say N. |
| |
| config SERIAL_8250_MANY_PORTS |
| bool "Support more than 4 legacy serial ports" |
| depends on SERIAL_8250_EXTENDED && !IA64 |
| help |
| Say Y here if you have dumb serial boards other than the four |
| standard COM 1/2/3/4 ports. This may happen if you have an AST |
| FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available |
| from <http://www.tldp.org/docs.html#howto>), or other custom |
| serial port hardware which acts similar to standard serial port |
| hardware. If you only use the standard COM 1/2/3/4 ports, you can |
| say N here to save some memory. You can also say Y if you have an |
| "intelligent" multiport card such as Cyclades, Digiboards, etc. |
| |
| config SERIAL_8250_SHARE_IRQ |
| bool "Support for sharing serial interrupts" |
| depends on SERIAL_8250_EXTENDED |
| help |
| Some serial boards have hardware support which allows multiple dumb |
| serial ports on the same board to share a single IRQ. To enable |
| support for this in the serial driver, say Y here. |
| |
| config SERIAL_8250_DETECT_IRQ |
| bool "Autodetect IRQ on standard ports (unsafe)" |
| depends on SERIAL_8250_EXTENDED |
| help |
| Say Y here if you want the kernel to try to guess which IRQ |
| to use for your serial port. |
| |
| This is considered unsafe; it is far better to configure the IRQ in |
| a boot script using the setserial command. |
| |
| If unsure, say N. |
| |
| config SERIAL_8250_RSA |
| bool "Support RSA serial ports" |
| depends on SERIAL_8250_EXTENDED |
| help |
| ::: To be written ::: |
| |
| # |
| # Multi-port serial cards |
| # |
| |
| config SERIAL_8250_FOURPORT |
| tristate "Support Fourport cards" |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| help |
| Say Y here if you have an AST FourPort serial board. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 8250_fourport. |
| |
| config SERIAL_8250_ACCENT |
| tristate "Support Accent cards" |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| help |
| Say Y here if you have an Accent Async serial board. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 8250_accent. |
| |
| |
| config SERIAL_8250_BOCA |
| tristate "Support Boca cards" |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| help |
| Say Y here if you have a Boca serial board. Please read the Boca |
| mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto> |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 8250_boca. |
| |
| |
| config SERIAL_8250_HUB6 |
| tristate "Support Hub6 cards" |
| depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| help |
| Say Y here if you have a HUB6 serial board. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 8250_hub6. |
| |
| config SERIAL_8250_MCA |
| tristate "Support 8250-type ports on MCA buses" |
| depends on SERIAL_8250 != n && MCA |
| help |
| Say Y here if you have a MCA serial ports. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called 8250_mca. |
| |
| config SERIAL_8250_ACORN |
| tristate "Acorn expansion card serial port support" |
| depends on ARCH_ACORN && SERIAL_8250 |
| help |
| If you have an Atomwide Serial card or Serial Port card for an Acorn |
| system, say Y to this option. The driver can handle 1, 2, or 3 port |
| cards. If unsure, say N. |
| |
| comment "Non-8250 serial port support" |
| |
| config SERIAL_AMBA_PL010 |
| tristate "ARM AMBA PL010 serial port support" |
| depends on ARM_AMBA |
| select SERIAL_CORE |
| help |
| This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have |
| an Integrator/AP or Integrator/PP2 platform, say Y or M here. |
| |
| If unsure, say N. |
| |
| config SERIAL_AMBA_PL010_CONSOLE |
| bool "Support for console on AMBA serial port" |
| depends on SERIAL_AMBA_PL010=y |
| select SERIAL_CORE_CONSOLE |
| ---help--- |
| Say Y here if you wish to use an AMBA PrimeCell UART as the system |
| console (the system console is the device which receives all kernel |
| messages and warnings and which allows logins in single user mode). |
| |
| Even if you say Y here, the currently visible framebuffer console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyAM0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_AMBA_PL011 |
| tristate "ARM AMBA PL011 serial port support" |
| depends on ARM_AMBA |
| select SERIAL_CORE |
| help |
| This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have |
| an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M |
| here. |
| |
| If unsure, say N. |
| |
| config SERIAL_AMBA_PL011_CONSOLE |
| bool "Support for console on AMBA serial port" |
| depends on SERIAL_AMBA_PL011=y |
| select SERIAL_CORE_CONSOLE |
| ---help--- |
| Say Y here if you wish to use an AMBA PrimeCell UART as the system |
| console (the system console is the device which receives all kernel |
| messages and warnings and which allows logins in single user mode). |
| |
| Even if you say Y here, the currently visible framebuffer console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyAM0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_CLPS711X |
| tristate "CLPS711X serial port support" |
| depends on ARM && ARCH_CLPS711X |
| select SERIAL_CORE |
| help |
| ::: To be written ::: |
| |
| config SERIAL_CLPS711X_CONSOLE |
| bool "Support for console on CLPS711X serial port" |
| depends on SERIAL_CLPS711X=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyCL1". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_S3C2410 |
| tristate "Samsung S3C2410 Serial port support" |
| depends on ARM && ARCH_S3C2410 |
| select SERIAL_CORE |
| help |
| Support for the on-chip UARTs on the Samsung S3C2410X CPU, |
| providing /dev/ttySAC0, 1 and 2 (note, some machines may not |
| provide all of these ports, depending on how the serial port |
| pins are configured. |
| |
| config SERIAL_S3C2410_CONSOLE |
| bool "Support for console on S3C2410 serial port" |
| depends on SERIAL_S3C2410=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Allow selection of the S3C2410 on-board serial ports for use as |
| an virtual console. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttySACx". (Try "man bootparam" or see the documentation of |
| your boot loader about how to pass options to the kernel at |
| boot time.) |
| |
| config SERIAL_DZ |
| bool "DECstation DZ serial driver" |
| depends on MACH_DECSTATION && MIPS32 |
| select SERIAL_CORE |
| help |
| DZ11-family serial controllers for VAXstations, including the |
| DC7085, M7814, and M7819. |
| |
| config SERIAL_DZ_CONSOLE |
| bool "Support console on DECstation DZ serial driver" |
| depends on SERIAL_DZ=y |
| select SERIAL_CORE_CONSOLE |
| help |
| If you say Y here, it will be possible to use a serial port as the |
| system console (the system console is the device which receives all |
| kernel messages and warnings and which allows logins in single user |
| mode). Note that the firmware uses ttyS0 as the serial console on |
| the Maxine and ttyS2 on the others. |
| |
| If unsure, say Y. |
| |
| config SERIAL_21285 |
| tristate "DC21285 serial port support" |
| depends on ARM && FOOTBRIDGE |
| select SERIAL_CORE |
| help |
| If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ |
| PCI bridge you can enable its onboard serial port by enabling this |
| option. |
| |
| config SERIAL_21285_CONSOLE |
| bool "Console on DC21285 serial port" |
| depends on SERIAL_21285=y |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have enabled the serial port on the 21285 footbridge you can |
| make it the console by answering Y to this option. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyFB". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_UART00 |
| bool "Excalibur serial port (uart00) support" |
| depends on ARM && ARCH_CAMELOT |
| select SERIAL_CORE |
| help |
| Say Y here if you want to use the hard logic uart on Excalibur. This |
| driver also supports soft logic implementations of this uart core. |
| |
| config SERIAL_UART00_CONSOLE |
| bool "Support for console on Excalibur serial port" |
| depends on SERIAL_UART00 |
| select SERIAL_CORE_CONSOLE |
| help |
| Say Y here if you want to support a serial console on an Excalibur |
| hard logic uart or uart00 IP core. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyS1". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_MPSC |
| bool "Marvell MPSC serial port support" |
| depends on PPC32 && MV64X60 |
| select SERIAL_CORE |
| help |
| Say Y here if you want to use the Marvell MPSC serial controller. |
| |
| config SERIAL_MPSC_CONSOLE |
| bool "Support for console on Marvell MPSC serial port" |
| depends on SERIAL_MPSC |
| select SERIAL_CORE_CONSOLE |
| help |
| Say Y here if you want to support a serial console on a Marvell MPSC. |
| |
| config SERIAL_PXA |
| bool "PXA serial port support" |
| depends on ARM && ARCH_PXA |
| select SERIAL_CORE |
| help |
| If you have a machine based on an Intel XScale PXA2xx CPU you |
| can enable its onboard serial ports by enabling this option. |
| |
| config SERIAL_PXA_CONSOLE |
| bool "Console on PXA serial port" |
| depends on SERIAL_PXA |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have enabled the serial port on the Intel XScale PXA |
| CPU you can make it the console by answering Y to this option. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttySA0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_SA1100 |
| bool "SA1100 serial port support" |
| depends on ARM && ARCH_SA1100 |
| select SERIAL_CORE |
| help |
| If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you |
| can enable its onboard serial port by enabling this option. |
| Please read <file:Documentation/arm/SA1100/serial_UART> for further |
| info. |
| |
| config SERIAL_SA1100_CONSOLE |
| bool "Console on SA1100 serial port" |
| depends on SERIAL_SA1100 |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have enabled the serial port on the SA1100/SA1110 StrongARM |
| CPU you can make it the console by answering Y to this option. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttySA0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_IMX |
| bool "IMX serial port support" |
| depends on ARM && ARCH_IMX |
| select SERIAL_CORE |
| help |
| If you have a machine based on a Motorola IMX CPU you |
| can enable its onboard serial port by enabling this option. |
| |
| config SERIAL_IMX_CONSOLE |
| bool "Console on IMX serial port" |
| depends on SERIAL_IMX |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have enabled the serial port on the Motorola IMX |
| CPU you can make it the console by answering Y to this option. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttySA0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_SUNCORE |
| bool |
| depends on SPARC32 || SPARC64 |
| select SERIAL_CORE |
| select SERIAL_CORE_CONSOLE |
| default y |
| |
| config SERIAL_SUNZILOG |
| tristate "Sun Zilog8530 serial support" |
| depends on SPARC32 || SPARC64 |
| help |
| This driver supports the Zilog8530 serial ports found on many Sparc |
| systems. Say Y or M if you want to be able to these serial ports. |
| |
| config SERIAL_SUNZILOG_CONSOLE |
| bool "Console on Sun Zilog8530 serial port" |
| depends on SERIAL_SUNZILOG=y |
| help |
| If you would like to be able to use the Zilog8530 serial port |
| on your Sparc system as the console, you can do so by answering |
| Y to this option. |
| |
| config SERIAL_SUNSU |
| tristate "Sun SU serial support" |
| depends on (SPARC32 || SPARC64) && PCI |
| help |
| This driver supports the 8250 serial ports that run the keyboard and |
| mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able |
| to these serial ports. |
| |
| config SERIAL_SUNSU_CONSOLE |
| bool "Console on Sun SU serial port" |
| depends on SERIAL_SUNSU=y |
| help |
| If you would like to be able to use the SU serial port |
| on your Sparc system as the console, you can do so by answering |
| Y to this option. |
| |
| config SERIAL_MUX |
| tristate "Serial MUX support" |
| depends on PARISC |
| select SERIAL_CORE |
| default y |
| ---help--- |
| Saying Y here will enable the hardware MUX serial driver for |
| the Nova and K class systems. The hardware MUX is not 8250/16550 |
| compatible therefore the /dev/ttyB0 device is shared between the |
| Serial MUX and the PDC software console. The following steps |
| need to be completed to use the Serial MUX: |
| |
| 1. create the device entry (mknod /dev/ttyB0 c 11 0) |
| 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 |
| 3. Add device ttyB0 to /etc/securetty (if you want to log on as |
| root on this console.) |
| 4. Change the kernel command console parameter to: console=ttyB0 |
| |
| config SERIAL_MUX_CONSOLE |
| bool "Support for console on serial MUX" |
| depends on SERIAL_MUX |
| select SERIAL_CORE_CONSOLE |
| default y |
| |
| config PDC_CONSOLE |
| bool "PDC software console support" |
| depends on PARISC && !SERIAL_MUX && VT |
| default n |
| help |
| Saying Y here will enable the software based PDC console to be |
| used as the system console. This is useful for machines in |
| which the hardware based console has not been written yet. The |
| following steps must be competed to use the PDC console: |
| |
| 1. create the device entry (mknod /dev/ttyB0 c 11 0) |
| 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 |
| 3. Add device ttyB0 to /etc/securetty (if you want to log on as |
| root on this console.) |
| 4. Change the kernel command console parameter to: console=ttyB0 |
| |
| config SERIAL_SUNSAB |
| tristate "Sun Siemens SAB82532 serial support" |
| depends on (SPARC32 || SPARC64) && PCI |
| help |
| This driver supports the Siemens SAB82532 DUSCC serial ports on newer |
| (PCI) UltraSPARC systems. Say Y or M if you want to be able to these |
| serial ports. |
| |
| config SERIAL_SUNSAB_CONSOLE |
| bool "Console on Sun Siemens SAB82532 serial port" |
| depends on SERIAL_SUNSAB=y |
| help |
| If you would like to be able to use the SAB82532 serial port |
| on your Sparc system as the console, you can do so by answering |
| Y to this option. |
| |
| config SERIAL_IP22_ZILOG |
| tristate "IP22 Zilog8530 serial support" |
| depends on SGI_IP22 |
| select SERIAL_CORE |
| help |
| This driver supports the Zilog8530 serial ports found on SGI IP22 |
| systems. Say Y or M if you want to be able to these serial ports. |
| |
| config SERIAL_IP22_ZILOG_CONSOLE |
| bool "Console on IP22 Zilog8530 serial port" |
| depends on SERIAL_IP22_ZILOG=y |
| select SERIAL_CORE_CONSOLE |
| |
| config V850E_UART |
| bool "NEC V850E on-chip UART support" |
| depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1 |
| select SERIAL_CORE |
| default y |
| |
| config V850E_UARTB |
| bool |
| depends V850E_UART && V850E_ME2 |
| default y |
| |
| config V850E_UART_CONSOLE |
| bool "Use NEC V850E on-chip UART for console" |
| depends on V850E_UART |
| select SERIAL_CORE_CONSOLE |
| |
| config SERIAL_SH_SCI |
| tristate "SH SCI(F) serial port support" |
| depends on SUPERH || H8300 |
| select SERIAL_CORE |
| |
| config SERIAL_SH_SCI_CONSOLE |
| bool "Support for console on SH SCI(F)" |
| depends on SERIAL_SH_SCI=y |
| select SERIAL_CORE_CONSOLE |
| |
| config SERIAL_AU1X00 |
| bool "Enable Au1x00 UART Support" |
| depends on MIPS && SOC_AU1X00 |
| select SERIAL_CORE |
| help |
| If you have an Alchemy AU1X00 processor (MIPS based) and you want |
| to use serial ports, say Y. Otherwise, say N. |
| |
| config SERIAL_AU1X00_CONSOLE |
| bool "Enable Au1x00 serial console" |
| depends on SERIAL_AU1X00 |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have an Alchemy AU1X00 processor (MIPS based) and you want |
| to use a console on a serial port, say Y. Otherwise, say N. |
| |
| config SERIAL_CORE |
| tristate |
| |
| config SERIAL_CORE_CONSOLE |
| bool |
| |
| config SERIAL_68328 |
| bool "68328 serial support" |
| depends on M68328 || M68EZ328 || M68VZ328 |
| help |
| This driver supports the built-in serial port of the Motorola 68328 |
| (standard, EZ and VZ varities). |
| |
| config SERIAL_68328_RTS_CTS |
| bool "Support RTS/CTS on 68328 serial port" |
| depends on SERIAL_68328 |
| |
| config SERIAL_COLDFIRE |
| bool "ColdFire serial support" |
| depends on COLDFIRE |
| help |
| This driver supports the built-in serial ports of the Motorola ColdFire |
| family of CPUs. |
| |
| config SERIAL_68360_SMC |
| bool "68360 SMC uart support" |
| depends on M68360 |
| help |
| This driver supports the SMC serial ports of the Motorola 68360 CPU. |
| |
| config SERIAL_68360_SCC |
| bool "68360 SCC uart support" |
| depends on M68360 |
| help |
| This driver supports the SCC serial ports of the Motorola 68360 CPU. |
| |
| config SERIAL_68360 |
| bool |
| depends on SERIAL_68360_SMC || SERIAL_68360_SCC |
| default y |
| |
| config SERIAL_PMACZILOG |
| tristate "PowerMac z85c30 ESCC support" |
| depends on PPC_OF && PPC_PMAC |
| select SERIAL_CORE |
| help |
| This driver supports the Zilog z85C30 serial ports found on |
| PowerMac machines. |
| Say Y or M if you want to be able to these serial ports. |
| |
| config SERIAL_PMACZILOG_CONSOLE |
| bool "Console on PowerMac z85c30 serial port" |
| depends on SERIAL_PMACZILOG=y |
| select SERIAL_CORE_CONSOLE |
| help |
| If you would like to be able to use the z85c30 serial port |
| on your PowerMac as the console, you can do so by answering |
| Y to this option. |
| |
| config SERIAL_LH7A40X |
| tristate "Sharp LH7A40X embedded UART support" |
| depends on ARM && ARCH_LH7A40X |
| select SERIAL_CORE |
| help |
| This enables support for the three on-board UARTs of the |
| Sharp LH7A40X series CPUs. Choose Y or M. |
| |
| config SERIAL_LH7A40X_CONSOLE |
| bool "Support for console on Sharp LH7A40X serial port" |
| depends on SERIAL_LH7A40X=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Say Y here if you wish to use one of the serial ports as the |
| system console--the system console is the device which |
| receives all kernel messages and warnings and which allows |
| logins in single user mode. |
| |
| Even if you say Y here, the currently visible framebuffer console |
| (/dev/tty0) will still be used as the default system console, but |
| you can alter that using a kernel command line, for example |
| "console=ttyAM1". |
| |
| config SERIAL_CPM |
| tristate "CPM SCC/SMC serial port support" |
| depends on CPM2 || 8xx |
| select SERIAL_CORE |
| help |
| This driver supports the SCC and SMC serial ports on Motorola |
| embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) |
| |
| config SERIAL_CPM_CONSOLE |
| bool "Support for console on CPM SCC/SMC serial port" |
| depends on SERIAL_CPM=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Say Y here if you wish to use a SCC or SMC CPM UART as the system |
| console (the system console is the device which receives all kernel |
| messages and warnings and which allows logins in single user mode). |
| |
| Even if you say Y here, the currently visible framebuffer console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyCPM0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| config SERIAL_CPM_SCC1 |
| bool "Support for SCC1 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SCC1 as a serial port |
| |
| config SERIAL_CPM_SCC2 |
| bool "Support for SCC2 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SCC2 as a serial port |
| |
| config SERIAL_CPM_SCC3 |
| bool "Support for SCC3 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SCC3 as a serial port |
| |
| config SERIAL_CPM_SCC4 |
| bool "Support for SCC4 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SCC4 as a serial port |
| |
| config SERIAL_CPM_SMC1 |
| bool "Support for SMC1 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SMC1 as a serial port |
| |
| config SERIAL_CPM_SMC2 |
| bool "Support for SMC2 serial port" |
| depends on SERIAL_CPM=y |
| help |
| Select the is option to use SMC2 as a serial port |
| |
| config SERIAL_SGI_L1_CONSOLE |
| bool "SGI Altix L1 serial console support" |
| depends on IA64_GENERIC || IA64_SGI_SN2 |
| select SERIAL_CORE |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have an SGI Altix and you would like to use the system |
| controller serial port as your console (you want this!), |
| say Y. Otherwise, say N. |
| |
| config SERIAL_MPC52xx |
| tristate "Freescale MPC52xx family PSC serial support" |
| depends on PPC_MPC52xx |
| select SERIAL_CORE |
| help |
| This drivers support the MPC52xx PSC serial ports. If you would |
| like to use them, you must answer Y or M to this option. Not that |
| for use as console, it must be included in kernel and not as a |
| module. |
| |
| config SERIAL_MPC52xx_CONSOLE |
| bool "Console on a Freescale MPC52xx family PSC serial port" |
| depends on SERIAL_MPC52xx=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Select this options if you'd like to use one of the PSC serial port |
| of the Freescale MPC52xx family as a console. |
| |
| config SERIAL_MPC52xx_CONSOLE_BAUD |
| int "Freescale MPC52xx family PSC serial port baud" |
| depends on SERIAL_MPC52xx_CONSOLE=y |
| default "9600" |
| help |
| Select the MPC52xx console baud rate. |
| This value is only used if the bootloader doesn't pass in the |
| console baudrate |
| |
| config SERIAL_ICOM |
| tristate "IBM Multiport Serial Adapter" |
| depends on PCI && (PPC_ISERIES || PPC_PSERIES) |
| select SERIAL_CORE |
| help |
| This driver is for a family of multiport serial adapters |
| including 2 port RVX, 2 port internal modem, 4 port internal |
| modem and a split 1 port RVX and 1 port internal modem. |
| |
| This driver can also be built as a module. If so, the module |
| will be called icom. |
| |
| config SERIAL_M32R_SIO |
| bool "M32R SIO I/F" |
| depends on M32R |
| default y |
| select SERIAL_CORE |
| help |
| Say Y here if you want to use the M32R serial controller. |
| |
| config SERIAL_M32R_SIO_CONSOLE |
| bool "use SIO console" |
| depends on SERIAL_M32R_SIO=y |
| select SERIAL_CORE_CONSOLE |
| help |
| Say Y here if you want to support a serial console. |
| |
| If you use an M3T-M32700UT or an OPSPUT platform, |
| please say also y for SERIAL_M32R_PLDSIO. |
| |
| config SERIAL_M32R_PLDSIO |
| bool "M32R SIO I/F on a PLD" |
| depends on SERIAL_M32R_SIO=y |
| default n |
| help |
| Say Y here if you want to use the M32R serial controller |
| on a PLD (Programmable Logic Device). |
| |
| If you use an M3T-M32700UT or an OPSPUT platform, |
| please say Y. |
| |
| config SERIAL_TXX9 |
| bool "TMPTX39XX/49XX SIO support" |
| depends HAS_TXX9_SERIAL |
| select SERIAL_CORE |
| default y |
| |
| config HAS_TXX9_SERIAL |
| bool |
| |
| config SERIAL_TXX9_CONSOLE |
| bool "TMPTX39XX/49XX SIO Console support" |
| depends on SERIAL_TXX9=y |
| select SERIAL_CORE_CONSOLE |
| |
| config SERIAL_TXX9_STDSERIAL |
| bool "TX39XX/49XX SIO act as standard serial" |
| depends on !SERIAL_8250 && SERIAL_TXX9 |
| |
| config SERIAL_VR41XX |
| tristate "NEC VR4100 series Serial Interface Unit support" |
| depends on CPU_VR41XX |
| select SERIAL_CORE |
| help |
| If you have a NEC VR4100 series processor and you want to use |
| Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) |
| (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. |
| |
| config SERIAL_VR41XX_CONSOLE |
| bool "Enable NEC VR4100 series Serial Interface Unit console" |
| depends on SERIAL_VR41XX |
| select SERIAL_CORE_CONSOLE |
| help |
| If you have a NEC VR4100 series processor and you want to use |
| a console on a serial port, say Y. Otherwise, say N. |
| |
| config SERIAL_JSM |
| tristate "Digi International NEO PCI Support" |
| depends on PCI |
| select SERIAL_CORE |
| help |
| This is a driver for Digi International's Neo series |
| of cards which provide multiple serial ports. You would need |
| something like this to connect more than two modems to your Linux |
| box, for instance in order to become a dial-in server. This driver |
| supports PCI boards only. |
| If you have a card like this, say Y here and read the file |
| <file:Documentation/jsm.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called jsm. |
| |
| config SERIAL_SGI_IOC4 |
| tristate "SGI IOC4 controller serial support" |
| depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 |
| select SERIAL_CORE |
| help |
| If you have an SGI Altix with an IOC4 based Base IO card |
| and wish to use the serial ports on this card, say Y. |
| Otherwise, say N. |
| |
| endmenu |