| /* |
| Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver |
| |
| Copyright (C) 2013 Luis Alves <ljalvs@gmail.com> |
| July, 6th 2013 |
| First release based on cx24116 driver by: |
| Steven Toth and Georg Acher, Darron Broad, Igor Liplianin |
| Cards currently supported: |
| TBS6980 - Dual DVBS/S2 PCIe card |
| TBS6981 - Dual DVBS/S2 PCIe card |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/firmware.h> |
| |
| #include "tuner-i2c.h" |
| #include "dvb_frontend.h" |
| #include "cx24117.h" |
| |
| |
| #define CX24117_DEFAULT_FIRMWARE "dvb-fe-cx24117.fw" |
| #define CX24117_SEARCH_RANGE_KHZ 5000 |
| |
| /* known registers */ |
| #define CX24117_REG_COMMAND (0x00) /* command buffer */ |
| #define CX24117_REG_EXECUTE (0x1f) /* execute command */ |
| |
| #define CX24117_REG_FREQ3_0 (0x34) /* frequency */ |
| #define CX24117_REG_FREQ2_0 (0x35) |
| #define CX24117_REG_FREQ1_0 (0x36) |
| #define CX24117_REG_STATE0 (0x39) |
| #define CX24117_REG_SSTATUS0 (0x3a) /* demod0 signal high / status */ |
| #define CX24117_REG_SIGNAL0 (0x3b) |
| #define CX24117_REG_FREQ5_0 (0x3c) /* +-freq */ |
| #define CX24117_REG_FREQ6_0 (0x3d) |
| #define CX24117_REG_SRATE2_0 (0x3e) /* +- 1000 * srate */ |
| #define CX24117_REG_SRATE1_0 (0x3f) |
| #define CX24117_REG_QUALITY2_0 (0x40) |
| #define CX24117_REG_QUALITY1_0 (0x41) |
| |
| #define CX24117_REG_BER4_0 (0x47) |
| #define CX24117_REG_BER3_0 (0x48) |
| #define CX24117_REG_BER2_0 (0x49) |
| #define CX24117_REG_BER1_0 (0x4a) |
| #define CX24117_REG_DVBS_UCB2_0 (0x4b) |
| #define CX24117_REG_DVBS_UCB1_0 (0x4c) |
| #define CX24117_REG_DVBS2_UCB2_0 (0x50) |
| #define CX24117_REG_DVBS2_UCB1_0 (0x51) |
| #define CX24117_REG_QSTATUS0 (0x93) |
| #define CX24117_REG_CLKDIV0 (0xe6) |
| #define CX24117_REG_RATEDIV0 (0xf0) |
| |
| |
| #define CX24117_REG_FREQ3_1 (0x55) /* frequency */ |
| #define CX24117_REG_FREQ2_1 (0x56) |
| #define CX24117_REG_FREQ1_1 (0x57) |
| #define CX24117_REG_STATE1 (0x5a) |
| #define CX24117_REG_SSTATUS1 (0x5b) /* demod1 signal high / status */ |
| #define CX24117_REG_SIGNAL1 (0x5c) |
| #define CX24117_REG_FREQ5_1 (0x5d) /* +- freq */ |
| #define CX24117_REG_FREQ4_1 (0x5e) |
| #define CX24117_REG_SRATE2_1 (0x5f) |
| #define CX24117_REG_SRATE1_1 (0x60) |
| #define CX24117_REG_QUALITY2_1 (0x61) |
| #define CX24117_REG_QUALITY1_1 (0x62) |
| #define CX24117_REG_BER4_1 (0x68) |
| #define CX24117_REG_BER3_1 (0x69) |
| #define CX24117_REG_BER2_1 (0x6a) |
| #define CX24117_REG_BER1_1 (0x6b) |
| #define CX24117_REG_DVBS_UCB2_1 (0x6c) |
| #define CX24117_REG_DVBS_UCB1_1 (0x6d) |
| #define CX24117_REG_DVBS2_UCB2_1 (0x71) |
| #define CX24117_REG_DVBS2_UCB1_1 (0x72) |
| #define CX24117_REG_QSTATUS1 (0x9f) |
| #define CX24117_REG_CLKDIV1 (0xe7) |
| #define CX24117_REG_RATEDIV1 (0xf1) |
| |
| |
| /* arg buffer size */ |
| #define CX24117_ARGLEN (0x1e) |
| |
| /* rolloff */ |
| #define CX24117_ROLLOFF_020 (0x00) |
| #define CX24117_ROLLOFF_025 (0x01) |
| #define CX24117_ROLLOFF_035 (0x02) |
| |
| /* pilot bit */ |
| #define CX24117_PILOT_OFF (0x00) |
| #define CX24117_PILOT_ON (0x40) |
| #define CX24117_PILOT_AUTO (0x80) |
| |
| /* signal status */ |
| #define CX24117_HAS_SIGNAL (0x01) |
| #define CX24117_HAS_CARRIER (0x02) |
| #define CX24117_HAS_VITERBI (0x04) |
| #define CX24117_HAS_SYNCLOCK (0x08) |
| #define CX24117_STATUS_MASK (0x0f) |
| #define CX24117_SIGNAL_MASK (0xc0) |
| |
| |
| /* arg offset for DiSEqC */ |
| #define CX24117_DISEQC_DEMOD (1) |
| #define CX24117_DISEQC_BURST (2) |
| #define CX24117_DISEQC_ARG3_2 (3) /* unknown value=2 */ |
| #define CX24117_DISEQC_ARG4_0 (4) /* unknown value=0 */ |
| #define CX24117_DISEQC_ARG5_0 (5) /* unknown value=0 */ |
| #define CX24117_DISEQC_MSGLEN (6) |
| #define CX24117_DISEQC_MSGOFS (7) |
| |
| /* DiSEqC burst */ |
| #define CX24117_DISEQC_MINI_A (0) |
| #define CX24117_DISEQC_MINI_B (1) |
| |
| |
| #define CX24117_PNE (0) /* 0 disabled / 2 enabled */ |
| #define CX24117_OCC (1) /* 0 disabled / 1 enabled */ |
| |
| |
| enum cmds { |
| CMD_SET_VCOFREQ = 0x10, |
| CMD_TUNEREQUEST = 0x11, |
| CMD_GLOBAL_MPEGCFG = 0x13, |
| CMD_MPEGCFG = 0x14, |
| CMD_TUNERINIT = 0x15, |
| CMD_GET_SRATE = 0x18, |
| CMD_SET_GOLDCODE = 0x19, |
| CMD_GET_AGCACC = 0x1a, |
| CMD_DEMODINIT = 0x1b, |
| CMD_GETCTLACC = 0x1c, |
| |
| CMD_LNBCONFIG = 0x20, |
| CMD_LNBSEND = 0x21, |
| CMD_LNBDCLEVEL = 0x22, |
| CMD_LNBPCBCONFIG = 0x23, |
| CMD_LNBSENDTONEBST = 0x24, |
| CMD_LNBUPDREPLY = 0x25, |
| |
| CMD_SET_GPIOMODE = 0x30, |
| CMD_SET_GPIOEN = 0x31, |
| CMD_SET_GPIODIR = 0x32, |
| CMD_SET_GPIOOUT = 0x33, |
| CMD_ENABLERSCORR = 0x34, |
| CMD_FWVERSION = 0x35, |
| CMD_SET_SLEEPMODE = 0x36, |
| CMD_BERCTRL = 0x3c, |
| CMD_EVENTCTRL = 0x3d, |
| }; |
| |
| static LIST_HEAD(hybrid_tuner_instance_list); |
| static DEFINE_MUTEX(cx24117_list_mutex); |
| |
| /* The Demod/Tuner can't easily provide these, we cache them */ |
| struct cx24117_tuning { |
| u32 frequency; |
| u32 symbol_rate; |
| fe_spectral_inversion_t inversion; |
| fe_code_rate_t fec; |
| |
| fe_delivery_system_t delsys; |
| fe_modulation_t modulation; |
| fe_pilot_t pilot; |
| fe_rolloff_t rolloff; |
| |
| /* Demod values */ |
| u8 fec_val; |
| u8 fec_mask; |
| u8 inversion_val; |
| u8 pilot_val; |
| u8 rolloff_val; |
| }; |
| |
| /* Basic commands that are sent to the firmware */ |
| struct cx24117_cmd { |
| u8 len; |
| u8 args[CX24117_ARGLEN]; |
| }; |
| |
| /* common to both fe's */ |
| struct cx24117_priv { |
| u8 demod_address; |
| struct i2c_adapter *i2c; |
| u8 skip_fw_load; |
| struct mutex fe_lock; |
| |
| /* Used for sharing this struct between demods */ |
| struct tuner_i2c_props i2c_props; |
| struct list_head hybrid_tuner_instance_list; |
| }; |
| |
| /* one per each fe */ |
| struct cx24117_state { |
| struct cx24117_priv *priv; |
| struct dvb_frontend frontend; |
| |
| struct cx24117_tuning dcur; |
| struct cx24117_tuning dnxt; |
| struct cx24117_cmd dsec_cmd; |
| |
| int demod; |
| }; |
| |
| /* modfec (modulation and FEC) lookup table */ |
| /* Check cx24116.c for a detailed description of each field */ |
| static struct cx24117_modfec { |
| fe_delivery_system_t delivery_system; |
| fe_modulation_t modulation; |
| fe_code_rate_t fec; |
| u8 mask; /* In DVBS mode this is used to autodetect */ |
| u8 val; /* Passed to the firmware to indicate mode selection */ |
| } cx24117_modfec_modes[] = { |
| /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ |
| |
| /*mod fec mask val */ |
| { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, |
| { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ |
| { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ |
| { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ |
| { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ |
| { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ |
| { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ |
| { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ |
| { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ |
| { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, |
| /* NBC-QPSK */ |
| { SYS_DVBS2, QPSK, FEC_NONE, 0x00, 0x00 }, |
| { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 }, |
| { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 }, |
| { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 }, |
| { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 }, |
| { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 }, |
| { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 }, |
| { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a }, |
| { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, |
| { SYS_DVBS2, QPSK, FEC_AUTO, 0x00, 0x00 }, |
| /* 8PSK */ |
| { SYS_DVBS2, PSK_8, FEC_NONE, 0x00, 0x00 }, |
| { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c }, |
| { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d }, |
| { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e }, |
| { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f }, |
| { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 }, |
| { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, |
| { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00, 0x00 }, |
| /* |
| * 'val' can be found in the FECSTATUS register when tuning. |
| * FECSTATUS will give the actual FEC in use if tuning was successful. |
| */ |
| }; |
| |
| |
| static int cx24117_writereg(struct cx24117_state *state, u8 reg, u8 data) |
| { |
| u8 buf[] = { reg, data }; |
| struct i2c_msg msg = { .addr = state->priv->demod_address, |
| .flags = 0, .buf = buf, .len = 2 }; |
| int ret; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d i2c wr @0x%02x=0x%02x\n", |
| __func__, state->demod, reg, data); |
| |
| ret = i2c_transfer(state->priv->i2c, &msg, 1); |
| if (ret < 0) { |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod%d i2c wr err(%i) @0x%02x=0x%02x\n", |
| KBUILD_MODNAME, state->demod, ret, reg, data); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int cx24117_writecmd(struct cx24117_state *state, |
| struct cx24117_cmd *cmd) |
| { |
| struct i2c_msg msg; |
| u8 buf[CX24117_ARGLEN+1]; |
| int ret; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d i2c wr cmd len=%d\n", |
| __func__, state->demod, cmd->len); |
| |
| buf[0] = CX24117_REG_COMMAND; |
| memcpy(&buf[1], cmd->args, cmd->len); |
| |
| msg.addr = state->priv->demod_address; |
| msg.flags = 0; |
| msg.len = cmd->len+1; |
| msg.buf = buf; |
| ret = i2c_transfer(state->priv->i2c, &msg, 1); |
| if (ret < 0) { |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod%d i2c wr cmd err(%i) len=%d\n", |
| KBUILD_MODNAME, state->demod, ret, cmd->len); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int cx24117_readreg(struct cx24117_state *state, u8 reg) |
| { |
| int ret; |
| u8 recv = 0; |
| struct i2c_msg msg[] = { |
| { .addr = state->priv->demod_address, .flags = 0, |
| .buf = ®, .len = 1 }, |
| { .addr = state->priv->demod_address, .flags = I2C_M_RD, |
| .buf = &recv, .len = 1 } |
| }; |
| |
| ret = i2c_transfer(state->priv->i2c, msg, 2); |
| if (ret < 0) { |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod%d i2c rd err(%d) @0x%x\n", |
| KBUILD_MODNAME, state->demod, ret, reg); |
| return ret; |
| } |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d i2c rd @0x%02x=0x%02x\n", |
| __func__, state->demod, reg, recv); |
| |
| return recv; |
| } |
| |
| static int cx24117_readregN(struct cx24117_state *state, |
| u8 reg, u8 *buf, int len) |
| { |
| int ret; |
| struct i2c_msg msg[] = { |
| { .addr = state->priv->demod_address, .flags = 0, |
| .buf = ®, .len = 1 }, |
| { .addr = state->priv->demod_address, .flags = I2C_M_RD, |
| .buf = buf, .len = len } |
| }; |
| |
| ret = i2c_transfer(state->priv->i2c, msg, 2); |
| if (ret < 0) { |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod%d i2c rd err(%d) @0x%x\n", |
| KBUILD_MODNAME, state->demod, ret, reg); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int cx24117_set_inversion(struct cx24117_state *state, |
| fe_spectral_inversion_t inversion) |
| { |
| dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", |
| __func__, inversion, state->demod); |
| |
| switch (inversion) { |
| case INVERSION_OFF: |
| state->dnxt.inversion_val = 0x00; |
| break; |
| case INVERSION_ON: |
| state->dnxt.inversion_val = 0x04; |
| break; |
| case INVERSION_AUTO: |
| state->dnxt.inversion_val = 0x0C; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| state->dnxt.inversion = inversion; |
| |
| return 0; |
| } |
| |
| static int cx24117_lookup_fecmod(struct cx24117_state *state, |
| fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f) |
| { |
| int i, ret = -EINVAL; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s(demod(0x%02x,0x%02x) demod%d\n", |
| __func__, m, f, state->demod); |
| |
| for (i = 0; i < ARRAY_SIZE(cx24117_modfec_modes); i++) { |
| if ((d == cx24117_modfec_modes[i].delivery_system) && |
| (m == cx24117_modfec_modes[i].modulation) && |
| (f == cx24117_modfec_modes[i].fec)) { |
| ret = i; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int cx24117_set_fec(struct cx24117_state *state, |
| fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec) |
| { |
| int ret; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s(0x%02x,0x%02x) demod%d\n", |
| __func__, mod, fec, state->demod); |
| |
| ret = cx24117_lookup_fecmod(state, delsys, mod, fec); |
| if (ret < 0) |
| return ret; |
| |
| state->dnxt.fec = fec; |
| state->dnxt.fec_val = cx24117_modfec_modes[ret].val; |
| state->dnxt.fec_mask = cx24117_modfec_modes[ret].mask; |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d mask/val = 0x%02x/0x%02x\n", __func__, |
| state->demod, state->dnxt.fec_mask, state->dnxt.fec_val); |
| |
| return 0; |
| } |
| |
| static int cx24117_set_symbolrate(struct cx24117_state *state, u32 rate) |
| { |
| dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", |
| __func__, rate, state->demod); |
| |
| state->dnxt.symbol_rate = rate; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d symbol_rate = %d\n", |
| __func__, state->demod, rate); |
| |
| return 0; |
| } |
| |
| static int cx24117_load_firmware(struct dvb_frontend *fe, |
| const struct firmware *fw); |
| |
| static int cx24117_firmware_ondemand(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| const struct firmware *fw; |
| int ret = 0; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d skip_fw_load=%d\n", |
| __func__, state->demod, state->priv->skip_fw_load); |
| |
| if (state->priv->skip_fw_load) |
| return 0; |
| |
| /* check if firmware if already running */ |
| if (cx24117_readreg(state, 0xeb) != 0xa) { |
| /* Load firmware */ |
| /* request the firmware, this will block until loaded */ |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: Waiting for firmware upload (%s)...\n", |
| __func__, CX24117_DEFAULT_FIRMWARE); |
| ret = request_firmware(&fw, CX24117_DEFAULT_FIRMWARE, |
| state->priv->i2c->dev.parent); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: Waiting for firmware upload(2)...\n", __func__); |
| if (ret) { |
| dev_err(&state->priv->i2c->dev, |
| "%s: No firmware uploaded " |
| "(timeout or file not found?)\n", __func__); |
| return ret; |
| } |
| |
| /* Make sure we don't recurse back through here |
| * during loading */ |
| state->priv->skip_fw_load = 1; |
| |
| ret = cx24117_load_firmware(fe, fw); |
| if (ret) |
| dev_err(&state->priv->i2c->dev, |
| "%s: Writing firmware failed\n", __func__); |
| release_firmware(fw); |
| |
| dev_info(&state->priv->i2c->dev, |
| "%s: Firmware upload %s\n", __func__, |
| ret == 0 ? "complete" : "failed"); |
| |
| /* Ensure firmware is always loaded if required */ |
| state->priv->skip_fw_load = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* Take a basic firmware command structure, format it |
| * and forward it for processing |
| */ |
| static int cx24117_cmd_execute_nolock(struct dvb_frontend *fe, |
| struct cx24117_cmd *cmd) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int i, ret; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", |
| __func__, state->demod); |
| |
| /* Load the firmware if required */ |
| ret = cx24117_firmware_ondemand(fe); |
| if (ret != 0) |
| return ret; |
| |
| /* Write the command */ |
| cx24117_writecmd(state, cmd); |
| |
| /* Start execution and wait for cmd to terminate */ |
| cx24117_writereg(state, CX24117_REG_EXECUTE, 0x01); |
| i = 0; |
| while (cx24117_readreg(state, CX24117_REG_EXECUTE)) { |
| msleep(20); |
| if (i++ > 40) { |
| /* Avoid looping forever if the firmware does |
| not respond */ |
| dev_warn(&state->priv->i2c->dev, |
| "%s() Firmware not responding\n", __func__); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static int cx24117_cmd_execute(struct dvb_frontend *fe, struct cx24117_cmd *cmd) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int ret; |
| |
| mutex_lock(&state->priv->fe_lock); |
| ret = cx24117_cmd_execute_nolock(fe, cmd); |
| mutex_unlock(&state->priv->fe_lock); |
| |
| return ret; |
| } |
| |
| static int cx24117_load_firmware(struct dvb_frontend *fe, |
| const struct firmware *fw) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| int i, ret; |
| unsigned char vers[4]; |
| |
| struct i2c_msg msg; |
| u8 *buf; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d FW is %zu bytes (%02x %02x .. %02x %02x)\n", |
| __func__, state->demod, fw->size, fw->data[0], fw->data[1], |
| fw->data[fw->size - 2], fw->data[fw->size - 1]); |
| |
| cx24117_writereg(state, 0xea, 0x00); |
| cx24117_writereg(state, 0xea, 0x01); |
| cx24117_writereg(state, 0xea, 0x00); |
| |
| cx24117_writereg(state, 0xce, 0x92); |
| |
| cx24117_writereg(state, 0xfb, 0x00); |
| cx24117_writereg(state, 0xfc, 0x00); |
| |
| cx24117_writereg(state, 0xc3, 0x04); |
| cx24117_writereg(state, 0xc4, 0x04); |
| |
| cx24117_writereg(state, 0xce, 0x00); |
| cx24117_writereg(state, 0xcf, 0x00); |
| |
| cx24117_writereg(state, 0xea, 0x00); |
| cx24117_writereg(state, 0xeb, 0x0c); |
| cx24117_writereg(state, 0xec, 0x06); |
| cx24117_writereg(state, 0xed, 0x05); |
| cx24117_writereg(state, 0xee, 0x03); |
| cx24117_writereg(state, 0xef, 0x05); |
| |
| cx24117_writereg(state, 0xf3, 0x03); |
| cx24117_writereg(state, 0xf4, 0x44); |
| |
| cx24117_writereg(state, CX24117_REG_RATEDIV0, 0x04); |
| cx24117_writereg(state, CX24117_REG_CLKDIV0, 0x02); |
| |
| cx24117_writereg(state, CX24117_REG_RATEDIV1, 0x04); |
| cx24117_writereg(state, CX24117_REG_CLKDIV1, 0x02); |
| |
| cx24117_writereg(state, 0xf2, 0x04); |
| cx24117_writereg(state, 0xe8, 0x02); |
| cx24117_writereg(state, 0xea, 0x01); |
| cx24117_writereg(state, 0xc8, 0x00); |
| cx24117_writereg(state, 0xc9, 0x00); |
| cx24117_writereg(state, 0xca, 0x00); |
| cx24117_writereg(state, 0xcb, 0x00); |
| cx24117_writereg(state, 0xcc, 0x00); |
| cx24117_writereg(state, 0xcd, 0x00); |
| cx24117_writereg(state, 0xe4, 0x03); |
| cx24117_writereg(state, 0xeb, 0x0a); |
| |
| cx24117_writereg(state, 0xfb, 0x00); |
| cx24117_writereg(state, 0xe0, 0x76); |
| cx24117_writereg(state, 0xf7, 0x81); |
| cx24117_writereg(state, 0xf8, 0x00); |
| cx24117_writereg(state, 0xf9, 0x00); |
| |
| buf = kmalloc(fw->size + 1, GFP_KERNEL); |
| if (buf == NULL) { |
| state->priv->skip_fw_load = 0; |
| return -ENOMEM; |
| } |
| |
| /* fw upload reg */ |
| buf[0] = 0xfa; |
| memcpy(&buf[1], fw->data, fw->size); |
| |
| /* prepare i2c message to send */ |
| msg.addr = state->priv->demod_address; |
| msg.flags = 0; |
| msg.len = fw->size + 1; |
| msg.buf = buf; |
| |
| /* send fw */ |
| ret = i2c_transfer(state->priv->i2c, &msg, 1); |
| if (ret < 0) |
| return ret; |
| |
| kfree(buf); |
| |
| cx24117_writereg(state, 0xf7, 0x0c); |
| cx24117_writereg(state, 0xe0, 0x00); |
| |
| /* Init demodulator */ |
| cmd.args[0] = CMD_DEMODINIT; |
| cmd.args[1] = 0x00; |
| cmd.args[2] = 0x01; |
| cmd.args[3] = 0x00; |
| cmd.len = 4; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| |
| /* Set VCO frequency */ |
| cmd.args[0] = CMD_SET_VCOFREQ; |
| cmd.args[1] = 0x06; |
| cmd.args[2] = 0x2b; |
| cmd.args[3] = 0xd8; |
| cmd.args[4] = 0xa5; |
| cmd.args[5] = 0xee; |
| cmd.args[6] = 0x03; |
| cmd.args[7] = 0x9d; |
| cmd.args[8] = 0xfc; |
| cmd.args[9] = 0x06; |
| cmd.args[10] = 0x02; |
| cmd.args[11] = 0x9d; |
| cmd.args[12] = 0xfc; |
| cmd.len = 13; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| |
| /* Tuner init */ |
| cmd.args[0] = CMD_TUNERINIT; |
| cmd.args[1] = 0x00; |
| cmd.args[2] = 0x01; |
| cmd.args[3] = 0x00; |
| cmd.args[4] = 0x00; |
| cmd.args[5] = 0x01; |
| cmd.args[6] = 0x01; |
| cmd.args[7] = 0x01; |
| cmd.args[8] = 0x00; |
| cmd.args[9] = 0x05; |
| cmd.args[10] = 0x02; |
| cmd.args[11] = 0x02; |
| cmd.args[12] = 0x00; |
| cmd.len = 13; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| |
| /* Global MPEG config */ |
| cmd.args[0] = CMD_GLOBAL_MPEGCFG; |
| cmd.args[1] = 0x00; |
| cmd.args[2] = 0x00; |
| cmd.args[3] = 0x00; |
| cmd.args[4] = 0x01; |
| cmd.args[5] = 0x00; |
| cmd.len = 6; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| |
| /* MPEG config for each demod */ |
| for (i = 0; i < 2; i++) { |
| cmd.args[0] = CMD_MPEGCFG; |
| cmd.args[1] = (u8) i; |
| cmd.args[2] = 0x00; |
| cmd.args[3] = 0x05; |
| cmd.args[4] = 0x00; |
| cmd.args[5] = 0x00; |
| cmd.args[6] = 0x55; |
| cmd.args[7] = 0x00; |
| cmd.len = 8; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| } |
| |
| cx24117_writereg(state, 0xce, 0xc0); |
| cx24117_writereg(state, 0xcf, 0x00); |
| cx24117_writereg(state, 0xe5, 0x04); |
| |
| /* Get firmware version */ |
| cmd.args[0] = CMD_FWVERSION; |
| cmd.len = 2; |
| for (i = 0; i < 4; i++) { |
| cmd.args[1] = i; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto error; |
| vers[i] = cx24117_readreg(state, 0x33); |
| } |
| dev_info(&state->priv->i2c->dev, |
| "%s: FW version %i.%i.%i.%i\n", __func__, |
| vers[0], vers[1], vers[2], vers[3]); |
| return 0; |
| error: |
| state->priv->skip_fw_load = 0; |
| dev_err(&state->priv->i2c->dev, "%s() Error running FW.\n", __func__); |
| return ret; |
| } |
| |
| static int cx24117_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int lock; |
| |
| lock = cx24117_readreg(state, |
| (state->demod == 0) ? CX24117_REG_SSTATUS0 : |
| CX24117_REG_SSTATUS1) & |
| CX24117_STATUS_MASK; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d status = 0x%02x\n", |
| __func__, state->demod, lock); |
| |
| *status = 0; |
| |
| if (lock & CX24117_HAS_SIGNAL) |
| *status |= FE_HAS_SIGNAL; |
| if (lock & CX24117_HAS_CARRIER) |
| *status |= FE_HAS_CARRIER; |
| if (lock & CX24117_HAS_VITERBI) |
| *status |= FE_HAS_VITERBI; |
| if (lock & CX24117_HAS_SYNCLOCK) |
| *status |= FE_HAS_SYNC | FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int cx24117_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[4]; |
| u8 base_reg = (state->demod == 0) ? |
| CX24117_REG_BER4_0 : |
| CX24117_REG_BER4_1; |
| |
| ret = cx24117_readregN(state, base_reg, buf, 4); |
| if (ret != 0) |
| return ret; |
| |
| *ber = (buf[0] << 24) | (buf[1] << 16) | |
| (buf[1] << 8) | buf[0]; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d ber=0x%04x\n", |
| __func__, state->demod, *ber); |
| |
| return 0; |
| } |
| |
| static int cx24117_read_signal_strength(struct dvb_frontend *fe, |
| u16 *signal_strength) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| int ret; |
| u16 sig_reading; |
| u8 buf[2]; |
| u8 reg = (state->demod == 0) ? |
| CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1; |
| |
| /* Read AGC accumulator register */ |
| cmd.args[0] = CMD_GET_AGCACC; |
| cmd.args[1] = (u8) state->demod; |
| cmd.len = 2; |
| ret = cx24117_cmd_execute(fe, &cmd); |
| if (ret != 0) |
| return ret; |
| |
| ret = cx24117_readregN(state, reg, buf, 2); |
| if (ret != 0) |
| return ret; |
| sig_reading = ((buf[0] & CX24117_SIGNAL_MASK) << 2) | buf[1]; |
| |
| *signal_strength = -100 * sig_reading + 94324; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d raw / cooked = 0x%04x / 0x%04x\n", |
| __func__, state->demod, sig_reading, *signal_strength); |
| |
| return 0; |
| } |
| |
| static int cx24117_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| u8 reg = (state->demod == 0) ? |
| CX24117_REG_QUALITY2_0 : CX24117_REG_QUALITY2_1; |
| |
| ret = cx24117_readregN(state, reg, buf, 2); |
| if (ret != 0) |
| return ret; |
| |
| *snr = (buf[0] << 8) | buf[1]; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d snr = 0x%04x\n", |
| __func__, state->demod, *snr); |
| |
| return ret; |
| } |
| |
| static int cx24117_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| fe_delivery_system_t delsys = fe->dtv_property_cache.delivery_system; |
| int ret; |
| u8 buf[2]; |
| u8 reg = (state->demod == 0) ? |
| CX24117_REG_DVBS_UCB2_0 : |
| CX24117_REG_DVBS_UCB2_1; |
| |
| switch (delsys) { |
| case SYS_DVBS: |
| break; |
| case SYS_DVBS2: |
| reg += (CX24117_REG_DVBS2_UCB2_0 - CX24117_REG_DVBS_UCB2_0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = cx24117_readregN(state, reg, buf, 2); |
| if (ret != 0) |
| return ret; |
| *ucblocks = (buf[0] << 8) | buf[1]; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d ucb=0x%04x\n", |
| __func__, state->demod, *ucblocks); |
| |
| return 0; |
| } |
| |
| /* Overwrite the current tuning params, we are about to tune */ |
| static void cx24117_clone_params(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| state->dcur = state->dnxt; |
| } |
| |
| /* Wait for LNB */ |
| static int cx24117_wait_for_lnb(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int i; |
| u8 val, reg = (state->demod == 0) ? CX24117_REG_QSTATUS0 : |
| CX24117_REG_QSTATUS1; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d qstatus = 0x%02x\n", |
| __func__, state->demod, cx24117_readreg(state, reg)); |
| |
| /* Wait for up to 300 ms */ |
| for (i = 0; i < 10; i++) { |
| val = cx24117_readreg(state, reg) & 0x01; |
| if (val != 0) |
| return 0; |
| msleep(30); |
| } |
| |
| dev_warn(&state->priv->i2c->dev, "%s: demod%d LNB not ready\n", |
| KBUILD_MODNAME, state->demod); |
| |
| return -ETIMEDOUT; /* -EBUSY ? */ |
| } |
| |
| static int cx24117_set_voltage(struct dvb_frontend *fe, |
| fe_sec_voltage_t voltage) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| int ret; |
| u8 reg = (state->demod == 0) ? 0x10 : 0x20; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d %s\n", |
| __func__, state->demod, |
| voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : |
| voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : |
| "SEC_VOLTAGE_OFF"); |
| |
| /* Prepare a set GPIO logic level CMD */ |
| cmd.args[0] = CMD_SET_GPIOOUT; |
| cmd.args[2] = reg; /* mask */ |
| cmd.len = 3; |
| |
| if ((voltage == SEC_VOLTAGE_13) || |
| (voltage == SEC_VOLTAGE_18)) { |
| /* power on LNB */ |
| cmd.args[1] = reg; |
| ret = cx24117_cmd_execute(fe, &cmd); |
| if (ret != 0) |
| return ret; |
| |
| ret = cx24117_wait_for_lnb(fe); |
| if (ret != 0) |
| return ret; |
| |
| /* Wait for voltage/min repeat delay */ |
| msleep(100); |
| |
| /* Set 13V/18V select pin */ |
| cmd.args[0] = CMD_LNBDCLEVEL; |
| cmd.args[1] = state->demod ? 0 : 1; |
| cmd.args[2] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00); |
| cmd.len = 3; |
| ret = cx24117_cmd_execute(fe, &cmd); |
| |
| /* Min delay time before DiSEqC send */ |
| msleep(20); |
| } else { |
| /* power off LNB */ |
| cmd.args[1] = 0x00; |
| ret = cx24117_cmd_execute(fe, &cmd); |
| } |
| |
| return ret; |
| } |
| |
| static int cx24117_set_tone(struct dvb_frontend *fe, |
| fe_sec_tone_mode_t tone) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| int ret; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", |
| __func__, state->demod, tone); |
| if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { |
| dev_warn(&state->priv->i2c->dev, "%s: demod%d invalid tone=%d\n", |
| KBUILD_MODNAME, state->demod, tone); |
| return -EINVAL; |
| } |
| |
| /* Wait for LNB ready */ |
| ret = cx24117_wait_for_lnb(fe); |
| if (ret != 0) |
| return ret; |
| |
| /* Min delay time after DiSEqC send */ |
| msleep(20); |
| |
| /* Set the tone */ |
| cmd.args[0] = CMD_LNBPCBCONFIG; |
| cmd.args[1] = (state->demod ? 0 : 1); |
| cmd.args[2] = 0x00; |
| cmd.args[3] = 0x00; |
| cmd.len = 5; |
| switch (tone) { |
| case SEC_TONE_ON: |
| cmd.args[4] = 0x01; |
| break; |
| case SEC_TONE_OFF: |
| cmd.args[4] = 0x00; |
| break; |
| } |
| |
| msleep(20); |
| |
| return cx24117_cmd_execute(fe, &cmd); |
| } |
| |
| /* Initialise DiSEqC */ |
| static int cx24117_diseqc_init(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| |
| /* Prepare a DiSEqC command */ |
| state->dsec_cmd.args[0] = CMD_LNBSEND; |
| |
| /* demod */ |
| state->dsec_cmd.args[CX24117_DISEQC_DEMOD] = state->demod ? 0 : 1; |
| |
| /* DiSEqC burst */ |
| state->dsec_cmd.args[CX24117_DISEQC_BURST] = CX24117_DISEQC_MINI_A; |
| |
| /* Unknown */ |
| state->dsec_cmd.args[CX24117_DISEQC_ARG3_2] = 0x02; |
| state->dsec_cmd.args[CX24117_DISEQC_ARG4_0] = 0x00; |
| |
| /* Continuation flag? */ |
| state->dsec_cmd.args[CX24117_DISEQC_ARG5_0] = 0x00; |
| |
| /* DiSEqC message length */ |
| state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = 0x00; |
| |
| /* Command length */ |
| state->dsec_cmd.len = 7; |
| |
| return 0; |
| } |
| |
| /* Send DiSEqC message */ |
| static int cx24117_send_diseqc_msg(struct dvb_frontend *fe, |
| struct dvb_diseqc_master_cmd *d) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| int i, ret; |
| |
| /* Dump DiSEqC message */ |
| dev_dbg(&state->priv->i2c->dev, "%s: demod %d (", |
| __func__, state->demod); |
| for (i = 0; i < d->msg_len; i++) |
| dev_dbg(&state->priv->i2c->dev, "0x%02x ", d->msg[i]); |
| dev_dbg(&state->priv->i2c->dev, ")\n"); |
| |
| /* Validate length */ |
| if (d->msg_len > 15) |
| return -EINVAL; |
| |
| /* DiSEqC message */ |
| for (i = 0; i < d->msg_len; i++) |
| state->dsec_cmd.args[CX24117_DISEQC_MSGOFS + i] = d->msg[i]; |
| |
| /* DiSEqC message length */ |
| state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = d->msg_len; |
| |
| /* Command length */ |
| state->dsec_cmd.len = CX24117_DISEQC_MSGOFS + |
| state->dsec_cmd.args[CX24117_DISEQC_MSGLEN]; |
| |
| /* |
| * Message is sent with derived else cached burst |
| * |
| * WRITE PORT GROUP COMMAND 38 |
| * |
| * 0/A/A: E0 10 38 F0..F3 |
| * 1/B/B: E0 10 38 F4..F7 |
| * 2/C/A: E0 10 38 F8..FB |
| * 3/D/B: E0 10 38 FC..FF |
| * |
| * databyte[3]= 8421:8421 |
| * ABCD:WXYZ |
| * CLR :SET |
| * |
| * WX= PORT SELECT 0..3 (X=TONEBURST) |
| * Y = VOLTAGE (0=13V, 1=18V) |
| * Z = BAND (0=LOW, 1=HIGH(22K)) |
| */ |
| if (d->msg_len >= 4 && d->msg[2] == 0x38) |
| state->dsec_cmd.args[CX24117_DISEQC_BURST] = |
| ((d->msg[3] & 4) >> 2); |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d burst=%d\n", |
| __func__, state->demod, |
| state->dsec_cmd.args[CX24117_DISEQC_BURST]); |
| |
| /* Wait for LNB ready */ |
| ret = cx24117_wait_for_lnb(fe); |
| if (ret != 0) |
| return ret; |
| |
| /* Wait for voltage/min repeat delay */ |
| msleep(100); |
| |
| /* Command */ |
| ret = cx24117_cmd_execute(fe, &state->dsec_cmd); |
| if (ret != 0) |
| return ret; |
| /* |
| * Wait for send |
| * |
| * Eutelsat spec: |
| * >15ms delay + (XXX determine if FW does this, see set_tone) |
| * 13.5ms per byte + |
| * >15ms delay + |
| * 12.5ms burst + |
| * >15ms delay (XXX determine if FW does this, see set_tone) |
| */ |
| msleep((state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] << 4) + 60); |
| |
| return 0; |
| } |
| |
| /* Send DiSEqC burst */ |
| static int cx24117_diseqc_send_burst(struct dvb_frontend *fe, |
| fe_sec_mini_cmd_t burst) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s(%d) demod=%d\n", |
| __func__, burst, state->demod); |
| |
| /* DiSEqC burst */ |
| if (burst == SEC_MINI_A) |
| state->dsec_cmd.args[CX24117_DISEQC_BURST] = |
| CX24117_DISEQC_MINI_A; |
| else if (burst == SEC_MINI_B) |
| state->dsec_cmd.args[CX24117_DISEQC_BURST] = |
| CX24117_DISEQC_MINI_B; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int cx24117_get_priv(struct cx24117_priv **priv, |
| struct i2c_adapter *i2c, u8 client_address) |
| { |
| int ret; |
| |
| mutex_lock(&cx24117_list_mutex); |
| ret = hybrid_tuner_request_state(struct cx24117_priv, (*priv), |
| hybrid_tuner_instance_list, i2c, client_address, "cx24117"); |
| mutex_unlock(&cx24117_list_mutex); |
| |
| return ret; |
| } |
| |
| static void cx24117_release_priv(struct cx24117_priv *priv) |
| { |
| mutex_lock(&cx24117_list_mutex); |
| if (priv != NULL) |
| hybrid_tuner_release_state(priv); |
| mutex_unlock(&cx24117_list_mutex); |
| } |
| |
| static void cx24117_release(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| dev_dbg(&state->priv->i2c->dev, "%s demod%d\n", |
| __func__, state->demod); |
| cx24117_release_priv(state->priv); |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops cx24117_ops; |
| |
| struct dvb_frontend *cx24117_attach(const struct cx24117_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct cx24117_state *state = NULL; |
| struct cx24117_priv *priv = NULL; |
| int demod = 0; |
| |
| /* get the common data struct for both demods */ |
| demod = cx24117_get_priv(&priv, i2c, config->demod_address); |
| |
| switch (demod) { |
| case 0: |
| dev_err(&state->priv->i2c->dev, |
| "%s: Error attaching frontend %d\n", |
| KBUILD_MODNAME, demod); |
| goto error1; |
| break; |
| case 1: |
| /* new priv instance */ |
| priv->i2c = i2c; |
| priv->demod_address = config->demod_address; |
| mutex_init(&priv->fe_lock); |
| break; |
| default: |
| /* existing priv instance */ |
| break; |
| } |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct cx24117_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error2; |
| |
| state->demod = demod - 1; |
| state->priv = priv; |
| |
| /* test i2c bus for ack */ |
| if (demod == 0) { |
| if (cx24117_readreg(state, 0x00) < 0) |
| goto error3; |
| } |
| |
| dev_info(&state->priv->i2c->dev, |
| "%s: Attaching frontend %d\n", |
| KBUILD_MODNAME, state->demod); |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &cx24117_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error3: |
| kfree(state); |
| error2: |
| cx24117_release_priv(priv); |
| error1: |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(cx24117_attach); |
| |
| /* |
| * Initialise or wake up device |
| * |
| * Power config will reset and load initial firmware if required |
| */ |
| static int cx24117_initfe(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| int ret; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", |
| __func__, state->demod); |
| |
| mutex_lock(&state->priv->fe_lock); |
| |
| /* Set sleep mode off */ |
| cmd.args[0] = CMD_SET_SLEEPMODE; |
| cmd.args[1] = (state->demod ? 1 : 0); |
| cmd.args[2] = 0; |
| cmd.len = 3; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto exit; |
| |
| ret = cx24117_diseqc_init(fe); |
| if (ret != 0) |
| goto exit; |
| |
| /* Set BER control */ |
| cmd.args[0] = CMD_BERCTRL; |
| cmd.args[1] = (state->demod ? 1 : 0); |
| cmd.args[2] = 0x10; |
| cmd.args[3] = 0x10; |
| cmd.len = 4; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto exit; |
| |
| /* Set RS correction (enable/disable) */ |
| cmd.args[0] = CMD_ENABLERSCORR; |
| cmd.args[1] = (state->demod ? 1 : 0); |
| cmd.args[2] = CX24117_OCC; |
| cmd.len = 3; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| if (ret != 0) |
| goto exit; |
| |
| /* Set GPIO direction */ |
| /* Set as output - controls LNB power on/off */ |
| cmd.args[0] = CMD_SET_GPIODIR; |
| cmd.args[1] = 0x30; |
| cmd.args[2] = 0x30; |
| cmd.len = 3; |
| ret = cx24117_cmd_execute_nolock(fe, &cmd); |
| |
| exit: |
| mutex_unlock(&state->priv->fe_lock); |
| |
| return ret; |
| } |
| |
| /* |
| * Put device to sleep |
| */ |
| static int cx24117_sleep(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct cx24117_cmd cmd; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", |
| __func__, state->demod); |
| |
| /* Set sleep mode on */ |
| cmd.args[0] = CMD_SET_SLEEPMODE; |
| cmd.args[1] = (state->demod ? 1 : 0); |
| cmd.args[2] = 1; |
| cmd.len = 3; |
| return cx24117_cmd_execute(fe, &cmd); |
| } |
| |
| /* dvb-core told us to tune, the tv property cache will be complete, |
| * it's safe for is to pull values and use them for tuning purposes. |
| */ |
| static int cx24117_set_frontend(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct cx24117_cmd cmd; |
| fe_status_t tunerstat; |
| int i, status, ret, retune = 1; |
| u8 reg_clkdiv, reg_ratediv; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", |
| __func__, state->demod); |
| |
| switch (c->delivery_system) { |
| case SYS_DVBS: |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S\n", |
| __func__, state->demod); |
| |
| /* Only QPSK is supported for DVB-S */ |
| if (c->modulation != QPSK) { |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d unsupported modulation (%d)\n", |
| __func__, state->demod, c->modulation); |
| return -EINVAL; |
| } |
| |
| /* Pilot doesn't exist in DVB-S, turn bit off */ |
| state->dnxt.pilot_val = CX24117_PILOT_OFF; |
| |
| /* DVB-S only supports 0.35 */ |
| state->dnxt.rolloff_val = CX24117_ROLLOFF_035; |
| break; |
| |
| case SYS_DVBS2: |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S2\n", |
| __func__, state->demod); |
| |
| /* |
| * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, |
| * but not hardware auto detection |
| */ |
| if (c->modulation != PSK_8 && c->modulation != QPSK) { |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d unsupported modulation (%d)\n", |
| __func__, state->demod, c->modulation); |
| return -EOPNOTSUPP; |
| } |
| |
| switch (c->pilot) { |
| case PILOT_AUTO: |
| state->dnxt.pilot_val = CX24117_PILOT_AUTO; |
| break; |
| case PILOT_OFF: |
| state->dnxt.pilot_val = CX24117_PILOT_OFF; |
| break; |
| case PILOT_ON: |
| state->dnxt.pilot_val = CX24117_PILOT_ON; |
| break; |
| default: |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d unsupported pilot mode (%d)\n", |
| __func__, state->demod, c->pilot); |
| return -EOPNOTSUPP; |
| } |
| |
| switch (c->rolloff) { |
| case ROLLOFF_20: |
| state->dnxt.rolloff_val = CX24117_ROLLOFF_020; |
| break; |
| case ROLLOFF_25: |
| state->dnxt.rolloff_val = CX24117_ROLLOFF_025; |
| break; |
| case ROLLOFF_35: |
| state->dnxt.rolloff_val = CX24117_ROLLOFF_035; |
| break; |
| case ROLLOFF_AUTO: |
| state->dnxt.rolloff_val = CX24117_ROLLOFF_035; |
| /* soft-auto rolloff */ |
| retune = 3; |
| break; |
| default: |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod%d unsupported rolloff (%d)\n", |
| KBUILD_MODNAME, state->demod, c->rolloff); |
| return -EOPNOTSUPP; |
| } |
| break; |
| |
| default: |
| dev_warn(&state->priv->i2c->dev, |
| "%s: demod %d unsupported delivery system (%d)\n", |
| KBUILD_MODNAME, state->demod, c->delivery_system); |
| return -EINVAL; |
| } |
| |
| state->dnxt.delsys = c->delivery_system; |
| state->dnxt.modulation = c->modulation; |
| state->dnxt.frequency = c->frequency; |
| state->dnxt.pilot = c->pilot; |
| state->dnxt.rolloff = c->rolloff; |
| |
| ret = cx24117_set_inversion(state, c->inversion); |
| if (ret != 0) |
| return ret; |
| |
| ret = cx24117_set_fec(state, |
| c->delivery_system, c->modulation, c->fec_inner); |
| if (ret != 0) |
| return ret; |
| |
| ret = cx24117_set_symbolrate(state, c->symbol_rate); |
| if (ret != 0) |
| return ret; |
| |
| /* discard the 'current' tuning parameters and prepare to tune */ |
| cx24117_clone_params(fe); |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: delsys = %d\n", __func__, state->dcur.delsys); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: modulation = %d\n", __func__, state->dcur.modulation); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: frequency = %d\n", __func__, state->dcur.frequency); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: pilot = %d (val = 0x%02x)\n", __func__, |
| state->dcur.pilot, state->dcur.pilot_val); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: retune = %d\n", __func__, retune); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: rolloff = %d (val = 0x%02x)\n", __func__, |
| state->dcur.rolloff, state->dcur.rolloff_val); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, |
| state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); |
| dev_dbg(&state->priv->i2c->dev, |
| "%s: Inversion = %d (val = 0x%02x)\n", __func__, |
| state->dcur.inversion, state->dcur.inversion_val); |
| |
| /* Prepare a tune request */ |
| cmd.args[0] = CMD_TUNEREQUEST; |
| |
| /* demod */ |
| cmd.args[1] = state->demod; |
| |
| /* Frequency */ |
| cmd.args[2] = (state->dcur.frequency & 0xff0000) >> 16; |
| cmd.args[3] = (state->dcur.frequency & 0x00ff00) >> 8; |
| cmd.args[4] = (state->dcur.frequency & 0x0000ff); |
| |
| /* Symbol Rate */ |
| cmd.args[5] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; |
| cmd.args[6] = ((state->dcur.symbol_rate / 1000) & 0x00ff); |
| |
| /* Automatic Inversion */ |
| cmd.args[7] = state->dcur.inversion_val; |
| |
| /* Modulation / FEC / Pilot */ |
| cmd.args[8] = state->dcur.fec_val | state->dcur.pilot_val; |
| |
| cmd.args[9] = CX24117_SEARCH_RANGE_KHZ >> 8; |
| cmd.args[10] = CX24117_SEARCH_RANGE_KHZ & 0xff; |
| |
| cmd.args[11] = state->dcur.rolloff_val; |
| cmd.args[12] = state->dcur.fec_mask; |
| |
| if (state->dcur.symbol_rate > 30000000) { |
| reg_ratediv = 0x04; |
| reg_clkdiv = 0x02; |
| } else if (state->dcur.symbol_rate > 10000000) { |
| reg_ratediv = 0x06; |
| reg_clkdiv = 0x03; |
| } else { |
| reg_ratediv = 0x0a; |
| reg_clkdiv = 0x05; |
| } |
| |
| cmd.args[13] = reg_ratediv; |
| cmd.args[14] = reg_clkdiv; |
| |
| cx24117_writereg(state, (state->demod == 0) ? |
| CX24117_REG_CLKDIV0 : CX24117_REG_CLKDIV1, reg_clkdiv); |
| cx24117_writereg(state, (state->demod == 0) ? |
| CX24117_REG_RATEDIV0 : CX24117_REG_RATEDIV1, reg_ratediv); |
| |
| cmd.args[15] = CX24117_PNE; |
| cmd.len = 16; |
| |
| do { |
| /* Reset status register */ |
| status = cx24117_readreg(state, (state->demod == 0) ? |
| CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1) & |
| CX24117_SIGNAL_MASK; |
| |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d status_setfe = %02x\n", |
| __func__, state->demod, status); |
| |
| cx24117_writereg(state, (state->demod == 0) ? |
| CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1, status); |
| |
| /* Tune */ |
| ret = cx24117_cmd_execute(fe, &cmd); |
| if (ret != 0) |
| break; |
| |
| /* |
| * Wait for up to 500 ms before retrying |
| * |
| * If we are able to tune then generally it occurs within 100ms. |
| * If it takes longer, try a different rolloff setting. |
| */ |
| for (i = 0; i < 50; i++) { |
| cx24117_read_status(fe, &tunerstat); |
| status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); |
| if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { |
| dev_dbg(&state->priv->i2c->dev, |
| "%s() demod%d tuned\n", |
| __func__, state->demod); |
| return 0; |
| } |
| msleep(20); |
| } |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d not tuned\n", |
| __func__, state->demod); |
| |
| /* try next rolloff value */ |
| if (state->dcur.rolloff == 3) |
| cmd.args[11]--; |
| |
| } while (--retune); |
| return -EINVAL; |
| } |
| |
| static int cx24117_tune(struct dvb_frontend *fe, bool re_tune, |
| unsigned int mode_flags, unsigned int *delay, fe_status_t *status) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| |
| dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", |
| __func__, state->demod); |
| |
| *delay = HZ / 5; |
| if (re_tune) { |
| int ret = cx24117_set_frontend(fe); |
| if (ret) |
| return ret; |
| } |
| return cx24117_read_status(fe, status); |
| } |
| |
| static int cx24117_get_algo(struct dvb_frontend *fe) |
| { |
| return DVBFE_ALGO_HW; |
| } |
| |
| static int cx24117_get_frontend(struct dvb_frontend *fe) |
| { |
| struct cx24117_state *state = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct cx24117_cmd cmd; |
| u8 reg, st, inv; |
| int ret, idx; |
| unsigned int freq; |
| short srate_os, freq_os; |
| |
| u8 buf[0x1f-4]; |
| |
| /* Read current tune parameters */ |
| cmd.args[0] = CMD_GETCTLACC; |
| cmd.args[1] = (u8) state->demod; |
| cmd.len = 2; |
| ret = cx24117_cmd_execute(fe, &cmd); |
| if (ret != 0) |
| return ret; |
| |
| /* read all required regs at once */ |
| reg = (state->demod == 0) ? CX24117_REG_FREQ3_0 : CX24117_REG_FREQ3_1; |
| ret = cx24117_readregN(state, reg, buf, 0x1f-4); |
| if (ret != 0) |
| return ret; |
| |
| st = buf[5]; |
| |
| /* get spectral inversion */ |
| inv = (((state->demod == 0) ? ~st : st) >> 6) & 1; |
| if (inv == 0) |
| c->inversion = INVERSION_OFF; |
| else |
| c->inversion = INVERSION_ON; |
| |
| /* modulation and fec */ |
| idx = st & 0x3f; |
| if (c->delivery_system == SYS_DVBS2) { |
| if (idx > 11) |
| idx += 9; |
| else |
| idx += 7; |
| } |
| |
| c->modulation = cx24117_modfec_modes[idx].modulation; |
| c->fec_inner = cx24117_modfec_modes[idx].fec; |
| |
| /* frequency */ |
| freq = (buf[0] << 16) | (buf[1] << 8) | buf[2]; |
| freq_os = (buf[8] << 8) | buf[9]; |
| c->frequency = freq + freq_os; |
| |
| /* symbol rate */ |
| srate_os = (buf[10] << 8) | buf[11]; |
| c->symbol_rate = -1000 * srate_os + state->dcur.symbol_rate; |
| return 0; |
| } |
| |
| static struct dvb_frontend_ops cx24117_ops = { |
| .delsys = { SYS_DVBS, SYS_DVBS2 }, |
| .info = { |
| .name = "Conexant CX24117/CX24132", |
| .frequency_min = 950000, |
| .frequency_max = 2150000, |
| .frequency_stepsize = 1011, /* kHz for QPSK frontends */ |
| .frequency_tolerance = 5000, |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 45000000, |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | |
| FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_2G_MODULATION | |
| FE_CAN_QPSK | FE_CAN_RECOVER |
| }, |
| |
| .release = cx24117_release, |
| |
| .init = cx24117_initfe, |
| .sleep = cx24117_sleep, |
| .read_status = cx24117_read_status, |
| .read_ber = cx24117_read_ber, |
| .read_signal_strength = cx24117_read_signal_strength, |
| .read_snr = cx24117_read_snr, |
| .read_ucblocks = cx24117_read_ucblocks, |
| .set_tone = cx24117_set_tone, |
| .set_voltage = cx24117_set_voltage, |
| .diseqc_send_master_cmd = cx24117_send_diseqc_msg, |
| .diseqc_send_burst = cx24117_diseqc_send_burst, |
| .get_frontend_algo = cx24117_get_algo, |
| .tune = cx24117_tune, |
| |
| .set_frontend = cx24117_set_frontend, |
| .get_frontend = cx24117_get_frontend, |
| }; |
| |
| |
| MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24117/cx24132 hardware"); |
| MODULE_AUTHOR("Luis Alves (ljalvs@gmail.com)"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("1.1"); |
| MODULE_FIRMWARE(CX24117_DEFAULT_FIRMWARE); |
| |