| /* |
| * linux/drivers/video/omap2/omapfb-main.c |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/fb.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/vmalloc.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/omapfb.h> |
| |
| #include <video/omapdss.h> |
| #include <video/omapvrfb.h> |
| |
| #include "omapfb.h" |
| |
| #define MODULE_NAME "omapfb" |
| |
| #define OMAPFB_PLANE_XRES_MIN 8 |
| #define OMAPFB_PLANE_YRES_MIN 8 |
| |
| static char *def_mode; |
| static char *def_vram; |
| static bool def_vrfb; |
| static int def_rotate; |
| static bool def_mirror; |
| static bool auto_update; |
| static unsigned int auto_update_freq; |
| module_param(auto_update, bool, 0); |
| module_param(auto_update_freq, uint, 0644); |
| |
| #ifdef DEBUG |
| bool omapfb_debug; |
| module_param_named(debug, omapfb_debug, bool, 0644); |
| static bool omapfb_test_pattern; |
| module_param_named(test, omapfb_test_pattern, bool, 0644); |
| #endif |
| |
| static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi); |
| static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev, |
| struct omap_dss_device *dssdev); |
| |
| #ifdef DEBUG |
| static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color) |
| { |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct fb_fix_screeninfo *fix = &fbi->fix; |
| void __iomem *addr = fbi->screen_base; |
| const unsigned bytespp = var->bits_per_pixel >> 3; |
| const unsigned line_len = fix->line_length / bytespp; |
| |
| int r = (color >> 16) & 0xff; |
| int g = (color >> 8) & 0xff; |
| int b = (color >> 0) & 0xff; |
| |
| if (var->bits_per_pixel == 16) { |
| u16 __iomem *p = (u16 __iomem *)addr; |
| p += y * line_len + x; |
| |
| r = r * 32 / 256; |
| g = g * 64 / 256; |
| b = b * 32 / 256; |
| |
| __raw_writew((r << 11) | (g << 5) | (b << 0), p); |
| } else if (var->bits_per_pixel == 24) { |
| u8 __iomem *p = (u8 __iomem *)addr; |
| p += (y * line_len + x) * 3; |
| |
| __raw_writeb(b, p + 0); |
| __raw_writeb(g, p + 1); |
| __raw_writeb(r, p + 2); |
| } else if (var->bits_per_pixel == 32) { |
| u32 __iomem *p = (u32 __iomem *)addr; |
| p += y * line_len + x; |
| __raw_writel(color, p); |
| } |
| } |
| |
| static void fill_fb(struct fb_info *fbi) |
| { |
| struct fb_var_screeninfo *var = &fbi->var; |
| const short w = var->xres_virtual; |
| const short h = var->yres_virtual; |
| void __iomem *addr = fbi->screen_base; |
| int y, x; |
| |
| if (!addr) |
| return; |
| |
| DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length); |
| |
| for (y = 0; y < h; y++) { |
| for (x = 0; x < w; x++) { |
| if (x < 20 && y < 20) |
| draw_pixel(fbi, x, y, 0xffffff); |
| else if (x < 20 && (y > 20 && y < h - 20)) |
| draw_pixel(fbi, x, y, 0xff); |
| else if (y < 20 && (x > 20 && x < w - 20)) |
| draw_pixel(fbi, x, y, 0xff00); |
| else if (x > w - 20 && (y > 20 && y < h - 20)) |
| draw_pixel(fbi, x, y, 0xff0000); |
| else if (y > h - 20 && (x > 20 && x < w - 20)) |
| draw_pixel(fbi, x, y, 0xffff00); |
| else if (x == 20 || x == w - 20 || |
| y == 20 || y == h - 20) |
| draw_pixel(fbi, x, y, 0xffffff); |
| else if (x == y || w - x == h - y) |
| draw_pixel(fbi, x, y, 0xff00ff); |
| else if (w - x == y || x == h - y) |
| draw_pixel(fbi, x, y, 0x00ffff); |
| else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) { |
| int t = x * 3 / w; |
| unsigned r = 0, g = 0, b = 0; |
| unsigned c; |
| if (var->bits_per_pixel == 16) { |
| if (t == 0) |
| b = (y % 32) * 256 / 32; |
| else if (t == 1) |
| g = (y % 64) * 256 / 64; |
| else if (t == 2) |
| r = (y % 32) * 256 / 32; |
| } else { |
| if (t == 0) |
| b = (y % 256); |
| else if (t == 1) |
| g = (y % 256); |
| else if (t == 2) |
| r = (y % 256); |
| } |
| c = (r << 16) | (g << 8) | (b << 0); |
| draw_pixel(fbi, x, y, c); |
| } else { |
| draw_pixel(fbi, x, y, 0); |
| } |
| } |
| } |
| } |
| #endif |
| |
| static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot) |
| { |
| const struct vrfb *vrfb = &ofbi->region->vrfb; |
| unsigned offset; |
| |
| switch (rot) { |
| case FB_ROTATE_UR: |
| offset = 0; |
| break; |
| case FB_ROTATE_CW: |
| offset = vrfb->yoffset; |
| break; |
| case FB_ROTATE_UD: |
| offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset; |
| break; |
| case FB_ROTATE_CCW: |
| offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN; |
| break; |
| default: |
| BUG(); |
| return 0; |
| } |
| |
| offset *= vrfb->bytespp; |
| |
| return offset; |
| } |
| |
| static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot) |
| { |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| return ofbi->region->vrfb.paddr[rot] |
| + omapfb_get_vrfb_offset(ofbi, rot); |
| } else { |
| return ofbi->region->paddr; |
| } |
| } |
| |
| static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi) |
| { |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| return ofbi->region->vrfb.paddr[0]; |
| else |
| return ofbi->region->paddr; |
| } |
| |
| static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi) |
| { |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| return ofbi->region->vrfb.vaddr[0]; |
| else |
| return ofbi->region->vaddr; |
| } |
| |
| static struct omapfb_colormode omapfb_colormodes[] = { |
| { |
| .dssmode = OMAP_DSS_COLOR_UYVY, |
| .bits_per_pixel = 16, |
| .nonstd = OMAPFB_COLOR_YUV422, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_YUV2, |
| .bits_per_pixel = 16, |
| .nonstd = OMAPFB_COLOR_YUY422, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_ARGB16, |
| .bits_per_pixel = 16, |
| .red = { .length = 4, .offset = 8, .msb_right = 0 }, |
| .green = { .length = 4, .offset = 4, .msb_right = 0 }, |
| .blue = { .length = 4, .offset = 0, .msb_right = 0 }, |
| .transp = { .length = 4, .offset = 12, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_RGB16, |
| .bits_per_pixel = 16, |
| .red = { .length = 5, .offset = 11, .msb_right = 0 }, |
| .green = { .length = 6, .offset = 5, .msb_right = 0 }, |
| .blue = { .length = 5, .offset = 0, .msb_right = 0 }, |
| .transp = { .length = 0, .offset = 0, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_RGB24P, |
| .bits_per_pixel = 24, |
| .red = { .length = 8, .offset = 16, .msb_right = 0 }, |
| .green = { .length = 8, .offset = 8, .msb_right = 0 }, |
| .blue = { .length = 8, .offset = 0, .msb_right = 0 }, |
| .transp = { .length = 0, .offset = 0, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_RGB24U, |
| .bits_per_pixel = 32, |
| .red = { .length = 8, .offset = 16, .msb_right = 0 }, |
| .green = { .length = 8, .offset = 8, .msb_right = 0 }, |
| .blue = { .length = 8, .offset = 0, .msb_right = 0 }, |
| .transp = { .length = 0, .offset = 0, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_ARGB32, |
| .bits_per_pixel = 32, |
| .red = { .length = 8, .offset = 16, .msb_right = 0 }, |
| .green = { .length = 8, .offset = 8, .msb_right = 0 }, |
| .blue = { .length = 8, .offset = 0, .msb_right = 0 }, |
| .transp = { .length = 8, .offset = 24, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_RGBA32, |
| .bits_per_pixel = 32, |
| .red = { .length = 8, .offset = 24, .msb_right = 0 }, |
| .green = { .length = 8, .offset = 16, .msb_right = 0 }, |
| .blue = { .length = 8, .offset = 8, .msb_right = 0 }, |
| .transp = { .length = 8, .offset = 0, .msb_right = 0 }, |
| }, { |
| .dssmode = OMAP_DSS_COLOR_RGBX32, |
| .bits_per_pixel = 32, |
| .red = { .length = 8, .offset = 24, .msb_right = 0 }, |
| .green = { .length = 8, .offset = 16, .msb_right = 0 }, |
| .blue = { .length = 8, .offset = 8, .msb_right = 0 }, |
| .transp = { .length = 0, .offset = 0, .msb_right = 0 }, |
| }, |
| }; |
| |
| static bool cmp_var_to_colormode(struct fb_var_screeninfo *var, |
| struct omapfb_colormode *color) |
| { |
| bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2) |
| { |
| return f1->length == f2->length && |
| f1->offset == f2->offset && |
| f1->msb_right == f2->msb_right; |
| } |
| |
| if (var->bits_per_pixel == 0 || |
| var->red.length == 0 || |
| var->blue.length == 0 || |
| var->green.length == 0) |
| return 0; |
| |
| return var->bits_per_pixel == color->bits_per_pixel && |
| cmp_component(&var->red, &color->red) && |
| cmp_component(&var->green, &color->green) && |
| cmp_component(&var->blue, &color->blue) && |
| cmp_component(&var->transp, &color->transp); |
| } |
| |
| static void assign_colormode_to_var(struct fb_var_screeninfo *var, |
| struct omapfb_colormode *color) |
| { |
| var->bits_per_pixel = color->bits_per_pixel; |
| var->nonstd = color->nonstd; |
| var->red = color->red; |
| var->green = color->green; |
| var->blue = color->blue; |
| var->transp = color->transp; |
| } |
| |
| static int fb_mode_to_dss_mode(struct fb_var_screeninfo *var, |
| enum omap_color_mode *mode) |
| { |
| enum omap_color_mode dssmode; |
| int i; |
| |
| /* first match with nonstd field */ |
| if (var->nonstd) { |
| for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { |
| struct omapfb_colormode *m = &omapfb_colormodes[i]; |
| if (var->nonstd == m->nonstd) { |
| assign_colormode_to_var(var, m); |
| *mode = m->dssmode; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* then try exact match of bpp and colors */ |
| for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { |
| struct omapfb_colormode *m = &omapfb_colormodes[i]; |
| if (cmp_var_to_colormode(var, m)) { |
| assign_colormode_to_var(var, m); |
| *mode = m->dssmode; |
| return 0; |
| } |
| } |
| |
| /* match with bpp if user has not filled color fields |
| * properly */ |
| switch (var->bits_per_pixel) { |
| case 1: |
| dssmode = OMAP_DSS_COLOR_CLUT1; |
| break; |
| case 2: |
| dssmode = OMAP_DSS_COLOR_CLUT2; |
| break; |
| case 4: |
| dssmode = OMAP_DSS_COLOR_CLUT4; |
| break; |
| case 8: |
| dssmode = OMAP_DSS_COLOR_CLUT8; |
| break; |
| case 12: |
| dssmode = OMAP_DSS_COLOR_RGB12U; |
| break; |
| case 16: |
| dssmode = OMAP_DSS_COLOR_RGB16; |
| break; |
| case 24: |
| dssmode = OMAP_DSS_COLOR_RGB24P; |
| break; |
| case 32: |
| dssmode = OMAP_DSS_COLOR_RGB24U; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { |
| struct omapfb_colormode *m = &omapfb_colormodes[i]; |
| if (dssmode == m->dssmode) { |
| assign_colormode_to_var(var, m); |
| *mode = m->dssmode; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int check_fb_res_bounds(struct fb_var_screeninfo *var) |
| { |
| int xres_min = OMAPFB_PLANE_XRES_MIN; |
| int xres_max = 2048; |
| int yres_min = OMAPFB_PLANE_YRES_MIN; |
| int yres_max = 2048; |
| |
| /* XXX: some applications seem to set virtual res to 0. */ |
| if (var->xres_virtual == 0) |
| var->xres_virtual = var->xres; |
| |
| if (var->yres_virtual == 0) |
| var->yres_virtual = var->yres; |
| |
| if (var->xres_virtual < xres_min || var->yres_virtual < yres_min) |
| return -EINVAL; |
| |
| if (var->xres < xres_min) |
| var->xres = xres_min; |
| if (var->yres < yres_min) |
| var->yres = yres_min; |
| if (var->xres > xres_max) |
| var->xres = xres_max; |
| if (var->yres > yres_max) |
| var->yres = yres_max; |
| |
| if (var->xres > var->xres_virtual) |
| var->xres = var->xres_virtual; |
| if (var->yres > var->yres_virtual) |
| var->yres = var->yres_virtual; |
| |
| return 0; |
| } |
| |
| static void shrink_height(unsigned long max_frame_size, |
| struct fb_var_screeninfo *var) |
| { |
| DBG("can't fit FB into memory, reducing y\n"); |
| var->yres_virtual = max_frame_size / |
| (var->xres_virtual * var->bits_per_pixel >> 3); |
| |
| if (var->yres_virtual < OMAPFB_PLANE_YRES_MIN) |
| var->yres_virtual = OMAPFB_PLANE_YRES_MIN; |
| |
| if (var->yres > var->yres_virtual) |
| var->yres = var->yres_virtual; |
| } |
| |
| static void shrink_width(unsigned long max_frame_size, |
| struct fb_var_screeninfo *var) |
| { |
| DBG("can't fit FB into memory, reducing x\n"); |
| var->xres_virtual = max_frame_size / var->yres_virtual / |
| (var->bits_per_pixel >> 3); |
| |
| if (var->xres_virtual < OMAPFB_PLANE_XRES_MIN) |
| var->xres_virtual = OMAPFB_PLANE_XRES_MIN; |
| |
| if (var->xres > var->xres_virtual) |
| var->xres = var->xres_virtual; |
| } |
| |
| static int check_vrfb_fb_size(unsigned long region_size, |
| const struct fb_var_screeninfo *var) |
| { |
| unsigned long min_phys_size = omap_vrfb_min_phys_size(var->xres_virtual, |
| var->yres_virtual, var->bits_per_pixel >> 3); |
| |
| return min_phys_size > region_size ? -EINVAL : 0; |
| } |
| |
| static int check_fb_size(const struct omapfb_info *ofbi, |
| struct fb_var_screeninfo *var) |
| { |
| unsigned long max_frame_size = ofbi->region->size; |
| int bytespp = var->bits_per_pixel >> 3; |
| unsigned long line_size = var->xres_virtual * bytespp; |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| /* One needs to check for both VRFB and OMAPFB limitations. */ |
| if (check_vrfb_fb_size(max_frame_size, var)) |
| shrink_height(omap_vrfb_max_height( |
| max_frame_size, var->xres_virtual, bytespp) * |
| line_size, var); |
| |
| if (check_vrfb_fb_size(max_frame_size, var)) { |
| DBG("cannot fit FB to memory\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size); |
| |
| if (line_size * var->yres_virtual > max_frame_size) |
| shrink_height(max_frame_size, var); |
| |
| if (line_size * var->yres_virtual > max_frame_size) { |
| shrink_width(max_frame_size, var); |
| line_size = var->xres_virtual * bytespp; |
| } |
| |
| if (line_size * var->yres_virtual > max_frame_size) { |
| DBG("cannot fit FB to memory\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Consider if VRFB assisted rotation is in use and if the virtual space for |
| * the zero degree view needs to be mapped. The need for mapping also acts as |
| * the trigger for setting up the hardware on the context in question. This |
| * ensures that one does not attempt to access the virtual view before the |
| * hardware is serving the address translations. |
| */ |
| static int setup_vrfb_rotation(struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_mem_region *rg = ofbi->region; |
| struct vrfb *vrfb = &rg->vrfb; |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct fb_fix_screeninfo *fix = &fbi->fix; |
| unsigned bytespp; |
| bool yuv_mode; |
| enum omap_color_mode mode; |
| int r; |
| bool reconf; |
| |
| if (!rg->size || ofbi->rotation_type != OMAP_DSS_ROT_VRFB) |
| return 0; |
| |
| DBG("setup_vrfb_rotation\n"); |
| |
| r = fb_mode_to_dss_mode(var, &mode); |
| if (r) |
| return r; |
| |
| bytespp = var->bits_per_pixel >> 3; |
| |
| yuv_mode = mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY; |
| |
| /* We need to reconfigure VRFB if the resolution changes, if yuv mode |
| * is enabled/disabled, or if bytes per pixel changes */ |
| |
| /* XXX we shouldn't allow this when framebuffer is mmapped */ |
| |
| reconf = false; |
| |
| if (yuv_mode != vrfb->yuv_mode) |
| reconf = true; |
| else if (bytespp != vrfb->bytespp) |
| reconf = true; |
| else if (vrfb->xres != var->xres_virtual || |
| vrfb->yres != var->yres_virtual) |
| reconf = true; |
| |
| if (vrfb->vaddr[0] && reconf) { |
| fbi->screen_base = NULL; |
| fix->smem_start = 0; |
| fix->smem_len = 0; |
| iounmap(vrfb->vaddr[0]); |
| vrfb->vaddr[0] = NULL; |
| DBG("setup_vrfb_rotation: reset fb\n"); |
| } |
| |
| if (vrfb->vaddr[0]) |
| return 0; |
| |
| omap_vrfb_setup(&rg->vrfb, rg->paddr, |
| var->xres_virtual, |
| var->yres_virtual, |
| bytespp, yuv_mode); |
| |
| /* Now one can ioremap the 0 angle view */ |
| r = omap_vrfb_map_angle(vrfb, var->yres_virtual, 0); |
| if (r) |
| return r; |
| |
| /* used by open/write in fbmem.c */ |
| fbi->screen_base = ofbi->region->vrfb.vaddr[0]; |
| |
| fix->smem_start = ofbi->region->vrfb.paddr[0]; |
| |
| switch (var->nonstd) { |
| case OMAPFB_COLOR_YUV422: |
| case OMAPFB_COLOR_YUY422: |
| fix->line_length = |
| (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; |
| break; |
| default: |
| fix->line_length = |
| (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; |
| break; |
| } |
| |
| fix->smem_len = var->yres_virtual * fix->line_length; |
| |
| return 0; |
| } |
| |
| int dss_mode_to_fb_mode(enum omap_color_mode dssmode, |
| struct fb_var_screeninfo *var) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { |
| struct omapfb_colormode *mode = &omapfb_colormodes[i]; |
| if (dssmode == mode->dssmode) { |
| assign_colormode_to_var(var, mode); |
| return 0; |
| } |
| } |
| return -ENOENT; |
| } |
| |
| void set_fb_fix(struct fb_info *fbi) |
| { |
| struct fb_fix_screeninfo *fix = &fbi->fix; |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_mem_region *rg = ofbi->region; |
| |
| DBG("set_fb_fix\n"); |
| |
| /* used by open/write in fbmem.c */ |
| fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); |
| |
| /* used by mmap in fbmem.c */ |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| switch (var->nonstd) { |
| case OMAPFB_COLOR_YUV422: |
| case OMAPFB_COLOR_YUY422: |
| fix->line_length = |
| (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; |
| break; |
| default: |
| fix->line_length = |
| (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; |
| break; |
| } |
| |
| fix->smem_len = var->yres_virtual * fix->line_length; |
| } else { |
| fix->line_length = |
| (var->xres_virtual * var->bits_per_pixel) >> 3; |
| fix->smem_len = rg->size; |
| } |
| |
| fix->smem_start = omapfb_get_region_paddr(ofbi); |
| |
| fix->type = FB_TYPE_PACKED_PIXELS; |
| |
| if (var->nonstd) |
| fix->visual = FB_VISUAL_PSEUDOCOLOR; |
| else { |
| switch (var->bits_per_pixel) { |
| case 32: |
| case 24: |
| case 16: |
| case 12: |
| fix->visual = FB_VISUAL_TRUECOLOR; |
| /* 12bpp is stored in 16 bits */ |
| break; |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| fix->visual = FB_VISUAL_PSEUDOCOLOR; |
| break; |
| } |
| } |
| |
| fix->accel = FB_ACCEL_NONE; |
| |
| fix->xpanstep = 1; |
| fix->ypanstep = 1; |
| } |
| |
| /* check new var and possibly modify it to be ok */ |
| int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omap_dss_device *display = fb2display(fbi); |
| enum omap_color_mode mode = 0; |
| int i; |
| int r; |
| |
| DBG("check_fb_var %d\n", ofbi->id); |
| |
| WARN_ON(!atomic_read(&ofbi->region->lock_count)); |
| |
| r = fb_mode_to_dss_mode(var, &mode); |
| if (r) { |
| DBG("cannot convert var to omap dss mode\n"); |
| return r; |
| } |
| |
| for (i = 0; i < ofbi->num_overlays; ++i) { |
| if ((ofbi->overlays[i]->supported_modes & mode) == 0) { |
| DBG("invalid mode\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (var->rotate > 3) |
| return -EINVAL; |
| |
| if (check_fb_res_bounds(var)) |
| return -EINVAL; |
| |
| /* When no memory is allocated ignore the size check */ |
| if (ofbi->region->size != 0 && check_fb_size(ofbi, var)) |
| return -EINVAL; |
| |
| if (var->xres + var->xoffset > var->xres_virtual) |
| var->xoffset = var->xres_virtual - var->xres; |
| if (var->yres + var->yoffset > var->yres_virtual) |
| var->yoffset = var->yres_virtual - var->yres; |
| |
| DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", |
| var->xres, var->yres, |
| var->xres_virtual, var->yres_virtual); |
| |
| if (display && display->driver->get_dimensions) { |
| u32 w, h; |
| display->driver->get_dimensions(display, &w, &h); |
| var->width = DIV_ROUND_CLOSEST(w, 1000); |
| var->height = DIV_ROUND_CLOSEST(h, 1000); |
| } else { |
| var->height = -1; |
| var->width = -1; |
| } |
| |
| var->grayscale = 0; |
| |
| if (display && display->driver->get_timings) { |
| struct omap_video_timings timings; |
| display->driver->get_timings(display, &timings); |
| |
| /* pixclock in ps, the rest in pixclock */ |
| var->pixclock = timings.pixel_clock != 0 ? |
| KHZ2PICOS(timings.pixel_clock) : |
| 0; |
| var->left_margin = timings.hbp; |
| var->right_margin = timings.hfp; |
| var->upper_margin = timings.vbp; |
| var->lower_margin = timings.vfp; |
| var->hsync_len = timings.hsw; |
| var->vsync_len = timings.vsw; |
| var->sync |= timings.hsync_level == OMAPDSS_SIG_ACTIVE_HIGH ? |
| FB_SYNC_HOR_HIGH_ACT : 0; |
| var->sync |= timings.vsync_level == OMAPDSS_SIG_ACTIVE_HIGH ? |
| FB_SYNC_VERT_HIGH_ACT : 0; |
| var->vmode = timings.interlace ? |
| FB_VMODE_INTERLACED : FB_VMODE_NONINTERLACED; |
| } else { |
| var->pixclock = 0; |
| var->left_margin = 0; |
| var->right_margin = 0; |
| var->upper_margin = 0; |
| var->lower_margin = 0; |
| var->hsync_len = 0; |
| var->vsync_len = 0; |
| var->sync = 0; |
| var->vmode = FB_VMODE_NONINTERLACED; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * --------------------------------------------------------------------------- |
| * fbdev framework callbacks |
| * --------------------------------------------------------------------------- |
| */ |
| static int omapfb_open(struct fb_info *fbi, int user) |
| { |
| return 0; |
| } |
| |
| static int omapfb_release(struct fb_info *fbi, int user) |
| { |
| return 0; |
| } |
| |
| static unsigned calc_rotation_offset_dma(const struct fb_var_screeninfo *var, |
| const struct fb_fix_screeninfo *fix, int rotation) |
| { |
| unsigned offset; |
| |
| offset = var->yoffset * fix->line_length + |
| var->xoffset * (var->bits_per_pixel >> 3); |
| |
| return offset; |
| } |
| |
| static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var, |
| const struct fb_fix_screeninfo *fix, int rotation) |
| { |
| unsigned offset; |
| |
| if (rotation == FB_ROTATE_UD) |
| offset = (var->yres_virtual - var->yres) * |
| fix->line_length; |
| else if (rotation == FB_ROTATE_CW) |
| offset = (var->yres_virtual - var->yres) * |
| (var->bits_per_pixel >> 3); |
| else |
| offset = 0; |
| |
| if (rotation == FB_ROTATE_UR) |
| offset += var->yoffset * fix->line_length + |
| var->xoffset * (var->bits_per_pixel >> 3); |
| else if (rotation == FB_ROTATE_UD) |
| offset -= var->yoffset * fix->line_length + |
| var->xoffset * (var->bits_per_pixel >> 3); |
| else if (rotation == FB_ROTATE_CW) |
| offset -= var->xoffset * fix->line_length + |
| var->yoffset * (var->bits_per_pixel >> 3); |
| else if (rotation == FB_ROTATE_CCW) |
| offset += var->xoffset * fix->line_length + |
| var->yoffset * (var->bits_per_pixel >> 3); |
| |
| return offset; |
| } |
| |
| static void omapfb_calc_addr(const struct omapfb_info *ofbi, |
| const struct fb_var_screeninfo *var, |
| const struct fb_fix_screeninfo *fix, |
| int rotation, u32 *paddr) |
| { |
| u32 data_start_p; |
| int offset; |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); |
| else |
| data_start_p = omapfb_get_region_paddr(ofbi); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| offset = calc_rotation_offset_vrfb(var, fix, rotation); |
| else |
| offset = calc_rotation_offset_dma(var, fix, rotation); |
| |
| data_start_p += offset; |
| |
| if (offset) |
| DBG("offset %d, %d = %d\n", |
| var->xoffset, var->yoffset, offset); |
| |
| DBG("paddr %x\n", data_start_p); |
| |
| *paddr = data_start_p; |
| } |
| |
| /* setup overlay according to the fb */ |
| int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, |
| u16 posx, u16 posy, u16 outw, u16 outh) |
| { |
| int r = 0; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct fb_fix_screeninfo *fix = &fbi->fix; |
| enum omap_color_mode mode = 0; |
| u32 data_start_p = 0; |
| struct omap_overlay_info info; |
| int xres, yres; |
| int screen_width; |
| int mirror; |
| int rotation = var->rotate; |
| int i; |
| |
| WARN_ON(!atomic_read(&ofbi->region->lock_count)); |
| |
| for (i = 0; i < ofbi->num_overlays; i++) { |
| if (ovl != ofbi->overlays[i]) |
| continue; |
| |
| rotation = (rotation + ofbi->rotation[i]) % 4; |
| break; |
| } |
| |
| DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, |
| posx, posy, outw, outh); |
| |
| if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) { |
| xres = var->yres; |
| yres = var->xres; |
| } else { |
| xres = var->xres; |
| yres = var->yres; |
| } |
| |
| if (ofbi->region->size) |
| omapfb_calc_addr(ofbi, var, fix, rotation, &data_start_p); |
| |
| r = fb_mode_to_dss_mode(var, &mode); |
| if (r) { |
| DBG("fb_mode_to_dss_mode failed"); |
| goto err; |
| } |
| |
| switch (var->nonstd) { |
| case OMAPFB_COLOR_YUV422: |
| case OMAPFB_COLOR_YUY422: |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| screen_width = fix->line_length |
| / (var->bits_per_pixel >> 2); |
| break; |
| } |
| default: |
| screen_width = fix->line_length / (var->bits_per_pixel >> 3); |
| break; |
| } |
| |
| ovl->get_overlay_info(ovl, &info); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| mirror = 0; |
| else |
| mirror = ofbi->mirror; |
| |
| info.paddr = data_start_p; |
| info.screen_width = screen_width; |
| info.width = xres; |
| info.height = yres; |
| info.color_mode = mode; |
| info.rotation_type = ofbi->rotation_type; |
| info.rotation = rotation; |
| info.mirror = mirror; |
| |
| info.pos_x = posx; |
| info.pos_y = posy; |
| info.out_width = outw; |
| info.out_height = outh; |
| |
| r = ovl->set_overlay_info(ovl, &info); |
| if (r) { |
| DBG("ovl->setup_overlay_info failed\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| DBG("setup_overlay failed\n"); |
| return r; |
| } |
| |
| /* apply var to the overlay */ |
| int omapfb_apply_changes(struct fb_info *fbi, int init) |
| { |
| int r = 0; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct omap_overlay *ovl; |
| u16 posx, posy; |
| u16 outw, outh; |
| int i; |
| |
| #ifdef DEBUG |
| if (omapfb_test_pattern) |
| fill_fb(fbi); |
| #endif |
| |
| WARN_ON(!atomic_read(&ofbi->region->lock_count)); |
| |
| for (i = 0; i < ofbi->num_overlays; i++) { |
| ovl = ofbi->overlays[i]; |
| |
| DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); |
| |
| if (ofbi->region->size == 0) { |
| /* the fb is not available. disable the overlay */ |
| omapfb_overlay_enable(ovl, 0); |
| if (!init && ovl->manager) |
| ovl->manager->apply(ovl->manager); |
| continue; |
| } |
| |
| if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { |
| int rotation = (var->rotate + ofbi->rotation[i]) % 4; |
| if (rotation == FB_ROTATE_CW || |
| rotation == FB_ROTATE_CCW) { |
| outw = var->yres; |
| outh = var->xres; |
| } else { |
| outw = var->xres; |
| outh = var->yres; |
| } |
| } else { |
| struct omap_overlay_info info; |
| ovl->get_overlay_info(ovl, &info); |
| outw = info.out_width; |
| outh = info.out_height; |
| } |
| |
| if (init) { |
| posx = 0; |
| posy = 0; |
| } else { |
| struct omap_overlay_info info; |
| ovl->get_overlay_info(ovl, &info); |
| posx = info.pos_x; |
| posy = info.pos_y; |
| } |
| |
| r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); |
| if (r) |
| goto err; |
| |
| if (!init && ovl->manager) |
| ovl->manager->apply(ovl->manager); |
| } |
| return 0; |
| err: |
| DBG("apply_changes failed\n"); |
| return r; |
| } |
| |
| /* checks var and eventually tweaks it to something supported, |
| * DO NOT MODIFY PAR */ |
| static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| int r; |
| |
| DBG("check_var(%d)\n", FB2OFB(fbi)->id); |
| |
| omapfb_get_mem_region(ofbi->region); |
| |
| r = check_fb_var(fbi, var); |
| |
| omapfb_put_mem_region(ofbi->region); |
| |
| return r; |
| } |
| |
| /* set the video mode according to info->var */ |
| static int omapfb_set_par(struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| int r; |
| |
| DBG("set_par(%d)\n", FB2OFB(fbi)->id); |
| |
| omapfb_get_mem_region(ofbi->region); |
| |
| set_fb_fix(fbi); |
| |
| r = setup_vrfb_rotation(fbi); |
| if (r) |
| goto out; |
| |
| r = omapfb_apply_changes(fbi, 0); |
| |
| out: |
| omapfb_put_mem_region(ofbi->region); |
| |
| return r; |
| } |
| |
| static int omapfb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct fb_var_screeninfo new_var; |
| int r; |
| |
| DBG("pan_display(%d)\n", FB2OFB(fbi)->id); |
| |
| if (var->xoffset == fbi->var.xoffset && |
| var->yoffset == fbi->var.yoffset) |
| return 0; |
| |
| new_var = fbi->var; |
| new_var.xoffset = var->xoffset; |
| new_var.yoffset = var->yoffset; |
| |
| fbi->var = new_var; |
| |
| omapfb_get_mem_region(ofbi->region); |
| |
| r = omapfb_apply_changes(fbi, 0); |
| |
| omapfb_put_mem_region(ofbi->region); |
| |
| return r; |
| } |
| |
| static void mmap_user_open(struct vm_area_struct *vma) |
| { |
| struct omapfb2_mem_region *rg = vma->vm_private_data; |
| |
| omapfb_get_mem_region(rg); |
| atomic_inc(&rg->map_count); |
| omapfb_put_mem_region(rg); |
| } |
| |
| static void mmap_user_close(struct vm_area_struct *vma) |
| { |
| struct omapfb2_mem_region *rg = vma->vm_private_data; |
| |
| omapfb_get_mem_region(rg); |
| atomic_dec(&rg->map_count); |
| omapfb_put_mem_region(rg); |
| } |
| |
| static struct vm_operations_struct mmap_user_ops = { |
| .open = mmap_user_open, |
| .close = mmap_user_close, |
| }; |
| |
| static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct fb_fix_screeninfo *fix = &fbi->fix; |
| struct omapfb2_mem_region *rg; |
| unsigned long start; |
| u32 len; |
| int r; |
| |
| rg = omapfb_get_mem_region(ofbi->region); |
| |
| start = omapfb_get_region_paddr(ofbi); |
| len = fix->smem_len; |
| |
| DBG("user mmap region start %lx, len %d, off %lx\n", start, len, |
| vma->vm_pgoff << PAGE_SHIFT); |
| |
| vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); |
| vma->vm_ops = &mmap_user_ops; |
| vma->vm_private_data = rg; |
| |
| r = vm_iomap_memory(vma, start, len); |
| if (r) |
| goto error; |
| |
| /* vm_ops.open won't be called for mmap itself. */ |
| atomic_inc(&rg->map_count); |
| |
| omapfb_put_mem_region(rg); |
| |
| return 0; |
| |
| error: |
| omapfb_put_mem_region(ofbi->region); |
| |
| return r; |
| } |
| |
| /* Store a single color palette entry into a pseudo palette or the hardware |
| * palette if one is available. For now we support only 16bpp and thus store |
| * the entry only to the pseudo palette. |
| */ |
| static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, |
| u_int blue, u_int transp, int update_hw_pal) |
| { |
| /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ |
| /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ |
| struct fb_var_screeninfo *var = &fbi->var; |
| int r = 0; |
| |
| enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ |
| |
| /*switch (plane->color_mode) {*/ |
| switch (mode) { |
| case OMAPFB_COLOR_YUV422: |
| case OMAPFB_COLOR_YUV420: |
| case OMAPFB_COLOR_YUY422: |
| r = -EINVAL; |
| break; |
| case OMAPFB_COLOR_CLUT_8BPP: |
| case OMAPFB_COLOR_CLUT_4BPP: |
| case OMAPFB_COLOR_CLUT_2BPP: |
| case OMAPFB_COLOR_CLUT_1BPP: |
| /* |
| if (fbdev->ctrl->setcolreg) |
| r = fbdev->ctrl->setcolreg(regno, red, green, blue, |
| transp, update_hw_pal); |
| */ |
| /* Fallthrough */ |
| r = -EINVAL; |
| break; |
| case OMAPFB_COLOR_RGB565: |
| case OMAPFB_COLOR_RGB444: |
| case OMAPFB_COLOR_RGB24P: |
| case OMAPFB_COLOR_RGB24U: |
| if (r != 0) |
| break; |
| |
| if (regno < 16) { |
| u32 pal; |
| pal = ((red >> (16 - var->red.length)) << |
| var->red.offset) | |
| ((green >> (16 - var->green.length)) << |
| var->green.offset) | |
| (blue >> (16 - var->blue.length)); |
| ((u32 *)(fbi->pseudo_palette))[regno] = pal; |
| } |
| break; |
| default: |
| BUG(); |
| } |
| return r; |
| } |
| |
| static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info) |
| { |
| DBG("setcolreg\n"); |
| |
| return _setcolreg(info, regno, red, green, blue, transp, 1); |
| } |
| |
| static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) |
| { |
| int count, index, r; |
| u16 *red, *green, *blue, *transp; |
| u16 trans = 0xffff; |
| |
| DBG("setcmap\n"); |
| |
| red = cmap->red; |
| green = cmap->green; |
| blue = cmap->blue; |
| transp = cmap->transp; |
| index = cmap->start; |
| |
| for (count = 0; count < cmap->len; count++) { |
| if (transp) |
| trans = *transp++; |
| r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, |
| count == cmap->len - 1); |
| if (r != 0) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_blank(int blank, struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omap_dss_device *display = fb2display(fbi); |
| struct omapfb_display_data *d; |
| int r = 0; |
| |
| if (!display) |
| return -EINVAL; |
| |
| omapfb_lock(fbdev); |
| |
| d = get_display_data(fbdev, display); |
| |
| switch (blank) { |
| case FB_BLANK_UNBLANK: |
| if (display->state == OMAP_DSS_DISPLAY_ACTIVE) |
| goto exit; |
| |
| r = display->driver->enable(display); |
| |
| if ((display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) && |
| d->update_mode == OMAPFB_AUTO_UPDATE && |
| !d->auto_update_work_enabled) |
| omapfb_start_auto_update(fbdev, display); |
| |
| break; |
| |
| case FB_BLANK_NORMAL: |
| /* FB_BLANK_NORMAL could be implemented. |
| * Needs DSS additions. */ |
| case FB_BLANK_VSYNC_SUSPEND: |
| case FB_BLANK_HSYNC_SUSPEND: |
| case FB_BLANK_POWERDOWN: |
| if (display->state != OMAP_DSS_DISPLAY_ACTIVE) |
| goto exit; |
| |
| if (d->auto_update_work_enabled) |
| omapfb_stop_auto_update(fbdev, display); |
| |
| display->driver->disable(display); |
| |
| break; |
| |
| default: |
| r = -EINVAL; |
| } |
| |
| exit: |
| omapfb_unlock(fbdev); |
| |
| return r; |
| } |
| |
| #if 0 |
| /* XXX fb_read and fb_write are needed for VRFB */ |
| ssize_t omapfb_write(struct fb_info *info, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos); |
| /* XXX needed for VRFB */ |
| return count; |
| } |
| #endif |
| |
| static struct fb_ops omapfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = omapfb_open, |
| .fb_release = omapfb_release, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_blank = omapfb_blank, |
| .fb_ioctl = omapfb_ioctl, |
| .fb_check_var = omapfb_check_var, |
| .fb_set_par = omapfb_set_par, |
| .fb_pan_display = omapfb_pan_display, |
| .fb_mmap = omapfb_mmap, |
| .fb_setcolreg = omapfb_setcolreg, |
| .fb_setcmap = omapfb_setcmap, |
| /*.fb_write = omapfb_write,*/ |
| }; |
| |
| static void omapfb_free_fbmem(struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omapfb2_mem_region *rg; |
| |
| rg = ofbi->region; |
| |
| if (rg->token == NULL) |
| return; |
| |
| WARN_ON(atomic_read(&rg->map_count)); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| /* unmap the 0 angle rotation */ |
| if (rg->vrfb.vaddr[0]) { |
| iounmap(rg->vrfb.vaddr[0]); |
| rg->vrfb.vaddr[0] = NULL; |
| } |
| |
| omap_vrfb_release_ctx(&rg->vrfb); |
| } |
| |
| dma_free_attrs(fbdev->dev, rg->size, rg->token, rg->dma_handle, |
| &rg->attrs); |
| |
| rg->token = NULL; |
| rg->vaddr = NULL; |
| rg->paddr = 0; |
| rg->alloc = 0; |
| rg->size = 0; |
| } |
| |
| static void clear_fb_info(struct fb_info *fbi) |
| { |
| memset(&fbi->var, 0, sizeof(fbi->var)); |
| memset(&fbi->fix, 0, sizeof(fbi->fix)); |
| strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id)); |
| } |
| |
| static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) |
| { |
| int i; |
| |
| DBG("free all fbmem\n"); |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| struct fb_info *fbi = fbdev->fbs[i]; |
| omapfb_free_fbmem(fbi); |
| clear_fb_info(fbi); |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, |
| unsigned long paddr) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omapfb2_mem_region *rg; |
| void *token; |
| DEFINE_DMA_ATTRS(attrs); |
| dma_addr_t dma_handle; |
| int r; |
| |
| rg = ofbi->region; |
| |
| rg->paddr = 0; |
| rg->vaddr = NULL; |
| memset(&rg->vrfb, 0, sizeof rg->vrfb); |
| rg->size = 0; |
| rg->type = 0; |
| rg->alloc = false; |
| rg->map = false; |
| |
| size = PAGE_ALIGN(size); |
| |
| dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) |
| dma_set_attr(DMA_ATTR_NO_KERNEL_MAPPING, &attrs); |
| |
| DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); |
| |
| token = dma_alloc_attrs(fbdev->dev, size, &dma_handle, |
| GFP_KERNEL, &attrs); |
| |
| if (token == NULL) { |
| dev_err(fbdev->dev, "failed to allocate framebuffer\n"); |
| return -ENOMEM; |
| } |
| |
| DBG("allocated VRAM paddr %lx, vaddr %p\n", |
| (unsigned long)dma_handle, token); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| r = omap_vrfb_request_ctx(&rg->vrfb); |
| if (r) { |
| dma_free_attrs(fbdev->dev, size, token, dma_handle, |
| &attrs); |
| dev_err(fbdev->dev, "vrfb create ctx failed\n"); |
| return r; |
| } |
| } |
| |
| rg->attrs = attrs; |
| rg->token = token; |
| rg->dma_handle = dma_handle; |
| |
| rg->paddr = (unsigned long)dma_handle; |
| rg->vaddr = (void __iomem *)token; |
| rg->size = size; |
| rg->alloc = 1; |
| |
| return 0; |
| } |
| |
| /* allocate fbmem using display resolution as reference */ |
| static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, |
| unsigned long paddr) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omap_dss_device *display; |
| int bytespp; |
| |
| display = fb2display(fbi); |
| |
| if (!display) |
| return 0; |
| |
| switch (omapfb_get_recommended_bpp(fbdev, display)) { |
| case 16: |
| bytespp = 2; |
| break; |
| case 24: |
| bytespp = 4; |
| break; |
| default: |
| bytespp = 4; |
| break; |
| } |
| |
| if (!size) { |
| u16 w, h; |
| |
| display->driver->get_resolution(display, &w, &h); |
| |
| if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { |
| size = max(omap_vrfb_min_phys_size(w, h, bytespp), |
| omap_vrfb_min_phys_size(h, w, bytespp)); |
| |
| DBG("adjusting fb mem size for VRFB, %u -> %lu\n", |
| w * h * bytespp, size); |
| } else { |
| size = w * h * bytespp; |
| } |
| } |
| |
| if (!size) |
| return 0; |
| |
| return omapfb_alloc_fbmem(fbi, size, paddr); |
| } |
| |
| static int omapfb_parse_vram_param(const char *param, int max_entries, |
| unsigned long *sizes, unsigned long *paddrs) |
| { |
| int fbnum; |
| unsigned long size; |
| unsigned long paddr = 0; |
| char *p, *start; |
| |
| start = (char *)param; |
| |
| while (1) { |
| p = start; |
| |
| fbnum = simple_strtoul(p, &p, 10); |
| |
| if (p == start) |
| return -EINVAL; |
| |
| if (*p != ':') |
| return -EINVAL; |
| |
| if (fbnum >= max_entries) |
| return -EINVAL; |
| |
| size = memparse(p + 1, &p); |
| |
| if (!size) |
| return -EINVAL; |
| |
| paddr = 0; |
| |
| if (*p == '@') { |
| paddr = simple_strtoul(p + 1, &p, 16); |
| |
| if (!paddr) |
| return -EINVAL; |
| |
| } |
| |
| WARN_ONCE(paddr, |
| "reserving memory at predefined address not supported\n"); |
| |
| paddrs[fbnum] = paddr; |
| sizes[fbnum] = size; |
| |
| if (*p == 0) |
| break; |
| |
| if (*p != ',') |
| return -EINVAL; |
| |
| ++p; |
| |
| start = p; |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) |
| { |
| int i, r; |
| unsigned long vram_sizes[10]; |
| unsigned long vram_paddrs[10]; |
| |
| memset(&vram_sizes, 0, sizeof(vram_sizes)); |
| memset(&vram_paddrs, 0, sizeof(vram_paddrs)); |
| |
| if (def_vram && omapfb_parse_vram_param(def_vram, 10, |
| vram_sizes, vram_paddrs)) { |
| dev_err(fbdev->dev, "failed to parse vram parameter\n"); |
| |
| memset(&vram_sizes, 0, sizeof(vram_sizes)); |
| memset(&vram_paddrs, 0, sizeof(vram_paddrs)); |
| } |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| /* allocate memory automatically only for fb0, or if |
| * excplicitly defined with vram or plat data option */ |
| if (i == 0 || vram_sizes[i] != 0) { |
| r = omapfb_alloc_fbmem_display(fbdev->fbs[i], |
| vram_sizes[i], vram_paddrs[i]); |
| |
| if (r) |
| return r; |
| } |
| } |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); |
| struct omapfb2_mem_region *rg; |
| rg = ofbi->region; |
| |
| DBG("region%d phys %08x virt %p size=%lu\n", |
| i, |
| rg->paddr, |
| rg->vaddr, |
| rg->size); |
| } |
| |
| return 0; |
| } |
| |
| static void omapfb_clear_fb(struct fb_info *fbi) |
| { |
| const struct fb_fillrect rect = { |
| .dx = 0, |
| .dy = 0, |
| .width = fbi->var.xres_virtual, |
| .height = fbi->var.yres_virtual, |
| .color = 0, |
| .rop = ROP_COPY, |
| }; |
| |
| cfb_fillrect(fbi, &rect); |
| } |
| |
| int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omapfb2_mem_region *rg = ofbi->region; |
| unsigned long old_size = rg->size; |
| unsigned long old_paddr = rg->paddr; |
| int old_type = rg->type; |
| int r; |
| |
| if (type != OMAPFB_MEMTYPE_SDRAM) |
| return -EINVAL; |
| |
| size = PAGE_ALIGN(size); |
| |
| if (old_size == size && old_type == type) |
| return 0; |
| |
| omapfb_free_fbmem(fbi); |
| |
| if (size == 0) { |
| clear_fb_info(fbi); |
| return 0; |
| } |
| |
| r = omapfb_alloc_fbmem(fbi, size, 0); |
| |
| if (r) { |
| if (old_size) |
| omapfb_alloc_fbmem(fbi, old_size, old_paddr); |
| |
| if (rg->size == 0) |
| clear_fb_info(fbi); |
| |
| return r; |
| } |
| |
| if (old_size == size) |
| return 0; |
| |
| if (old_size == 0) { |
| DBG("initializing fb %d\n", ofbi->id); |
| r = omapfb_fb_init(fbdev, fbi); |
| if (r) { |
| DBG("omapfb_fb_init failed\n"); |
| goto err; |
| } |
| r = omapfb_apply_changes(fbi, 1); |
| if (r) { |
| DBG("omapfb_apply_changes failed\n"); |
| goto err; |
| } |
| } else { |
| struct fb_var_screeninfo new_var; |
| memcpy(&new_var, &fbi->var, sizeof(new_var)); |
| r = check_fb_var(fbi, &new_var); |
| if (r) |
| goto err; |
| memcpy(&fbi->var, &new_var, sizeof(fbi->var)); |
| set_fb_fix(fbi); |
| r = setup_vrfb_rotation(fbi); |
| if (r) |
| goto err; |
| } |
| |
| omapfb_clear_fb(fbi); |
| |
| return 0; |
| err: |
| omapfb_free_fbmem(fbi); |
| clear_fb_info(fbi); |
| return r; |
| } |
| |
| static void omapfb_auto_update_work(struct work_struct *work) |
| { |
| struct omap_dss_device *dssdev; |
| struct omap_dss_driver *dssdrv; |
| struct omapfb_display_data *d; |
| u16 w, h; |
| unsigned int freq; |
| struct omapfb2_device *fbdev; |
| |
| d = container_of(work, struct omapfb_display_data, |
| auto_update_work.work); |
| |
| dssdev = d->dssdev; |
| dssdrv = dssdev->driver; |
| fbdev = d->fbdev; |
| |
| if (!dssdrv || !dssdrv->update) |
| return; |
| |
| if (dssdrv->sync) |
| dssdrv->sync(dssdev); |
| |
| dssdrv->get_resolution(dssdev, &w, &h); |
| dssdrv->update(dssdev, 0, 0, w, h); |
| |
| freq = auto_update_freq; |
| if (freq == 0) |
| freq = 20; |
| queue_delayed_work(fbdev->auto_update_wq, |
| &d->auto_update_work, HZ / freq); |
| } |
| |
| void omapfb_start_auto_update(struct omapfb2_device *fbdev, |
| struct omap_dss_device *display) |
| { |
| struct omapfb_display_data *d; |
| |
| if (fbdev->auto_update_wq == NULL) { |
| struct workqueue_struct *wq; |
| |
| wq = create_singlethread_workqueue("omapfb_auto_update"); |
| |
| if (wq == NULL) { |
| dev_err(fbdev->dev, "Failed to create workqueue for " |
| "auto-update\n"); |
| return; |
| } |
| |
| fbdev->auto_update_wq = wq; |
| } |
| |
| d = get_display_data(fbdev, display); |
| |
| INIT_DELAYED_WORK(&d->auto_update_work, omapfb_auto_update_work); |
| |
| d->auto_update_work_enabled = true; |
| |
| omapfb_auto_update_work(&d->auto_update_work.work); |
| } |
| |
| void omapfb_stop_auto_update(struct omapfb2_device *fbdev, |
| struct omap_dss_device *display) |
| { |
| struct omapfb_display_data *d; |
| |
| d = get_display_data(fbdev, display); |
| |
| cancel_delayed_work_sync(&d->auto_update_work); |
| |
| d->auto_update_work_enabled = false; |
| } |
| |
| /* initialize fb_info, var, fix to something sane based on the display */ |
| static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) |
| { |
| struct fb_var_screeninfo *var = &fbi->var; |
| struct omap_dss_device *display = fb2display(fbi); |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| int r = 0; |
| |
| fbi->fbops = &omapfb_ops; |
| fbi->flags = FBINFO_FLAG_DEFAULT; |
| fbi->pseudo_palette = fbdev->pseudo_palette; |
| |
| if (ofbi->region->size == 0) { |
| clear_fb_info(fbi); |
| return 0; |
| } |
| |
| var->nonstd = 0; |
| var->bits_per_pixel = 0; |
| |
| var->rotate = def_rotate; |
| |
| if (display) { |
| u16 w, h; |
| int rotation = (var->rotate + ofbi->rotation[0]) % 4; |
| |
| display->driver->get_resolution(display, &w, &h); |
| |
| if (rotation == FB_ROTATE_CW || |
| rotation == FB_ROTATE_CCW) { |
| var->xres = h; |
| var->yres = w; |
| } else { |
| var->xres = w; |
| var->yres = h; |
| } |
| |
| var->xres_virtual = var->xres; |
| var->yres_virtual = var->yres; |
| |
| if (!var->bits_per_pixel) { |
| switch (omapfb_get_recommended_bpp(fbdev, display)) { |
| case 16: |
| var->bits_per_pixel = 16; |
| break; |
| case 24: |
| var->bits_per_pixel = 32; |
| break; |
| default: |
| dev_err(fbdev->dev, "illegal display " |
| "bpp\n"); |
| return -EINVAL; |
| } |
| } |
| } else { |
| /* if there's no display, let's just guess some basic values */ |
| var->xres = 320; |
| var->yres = 240; |
| var->xres_virtual = var->xres; |
| var->yres_virtual = var->yres; |
| if (!var->bits_per_pixel) |
| var->bits_per_pixel = 16; |
| } |
| |
| r = check_fb_var(fbi, var); |
| if (r) |
| goto err; |
| |
| set_fb_fix(fbi); |
| r = setup_vrfb_rotation(fbi); |
| if (r) |
| goto err; |
| |
| r = fb_alloc_cmap(&fbi->cmap, 256, 0); |
| if (r) |
| dev_err(fbdev->dev, "unable to allocate color map memory\n"); |
| |
| err: |
| return r; |
| } |
| |
| static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) |
| { |
| fb_dealloc_cmap(&fbi->cmap); |
| } |
| |
| |
| static void omapfb_free_resources(struct omapfb2_device *fbdev) |
| { |
| int i; |
| |
| DBG("free_resources\n"); |
| |
| if (fbdev == NULL) |
| return; |
| |
| for (i = 0; i < fbdev->num_fbs; i++) |
| unregister_framebuffer(fbdev->fbs[i]); |
| |
| /* free the reserved fbmem */ |
| omapfb_free_all_fbmem(fbdev); |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| fbinfo_cleanup(fbdev, fbdev->fbs[i]); |
| framebuffer_release(fbdev->fbs[i]); |
| } |
| |
| for (i = 0; i < fbdev->num_displays; i++) { |
| struct omap_dss_device *dssdev = fbdev->displays[i].dssdev; |
| |
| if (fbdev->displays[i].auto_update_work_enabled) |
| omapfb_stop_auto_update(fbdev, dssdev); |
| |
| if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) |
| dssdev->driver->disable(dssdev); |
| |
| omap_dss_put_device(dssdev); |
| } |
| |
| if (fbdev->auto_update_wq != NULL) { |
| flush_workqueue(fbdev->auto_update_wq); |
| destroy_workqueue(fbdev->auto_update_wq); |
| fbdev->auto_update_wq = NULL; |
| } |
| |
| dev_set_drvdata(fbdev->dev, NULL); |
| } |
| |
| static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) |
| { |
| int r, i; |
| |
| fbdev->num_fbs = 0; |
| |
| DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); |
| |
| /* allocate fb_infos */ |
| for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { |
| struct fb_info *fbi; |
| struct omapfb_info *ofbi; |
| |
| fbi = framebuffer_alloc(sizeof(struct omapfb_info), |
| fbdev->dev); |
| |
| if (fbi == NULL) { |
| dev_err(fbdev->dev, |
| "unable to allocate memory for plane info\n"); |
| return -ENOMEM; |
| } |
| |
| clear_fb_info(fbi); |
| |
| fbdev->fbs[i] = fbi; |
| |
| ofbi = FB2OFB(fbi); |
| ofbi->fbdev = fbdev; |
| ofbi->id = i; |
| |
| ofbi->region = &fbdev->regions[i]; |
| ofbi->region->id = i; |
| init_rwsem(&ofbi->region->lock); |
| |
| /* assign these early, so that fb alloc can use them */ |
| ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : |
| OMAP_DSS_ROT_DMA; |
| ofbi->mirror = def_mirror; |
| |
| fbdev->num_fbs++; |
| } |
| |
| DBG("fb_infos allocated\n"); |
| |
| /* assign overlays for the fbs */ |
| for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { |
| struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); |
| |
| ofbi->overlays[0] = fbdev->overlays[i]; |
| ofbi->num_overlays = 1; |
| } |
| |
| /* allocate fb memories */ |
| r = omapfb_allocate_all_fbs(fbdev); |
| if (r) { |
| dev_err(fbdev->dev, "failed to allocate fbmem\n"); |
| return r; |
| } |
| |
| DBG("fbmems allocated\n"); |
| |
| /* setup fb_infos */ |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| struct fb_info *fbi = fbdev->fbs[i]; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| |
| omapfb_get_mem_region(ofbi->region); |
| r = omapfb_fb_init(fbdev, fbi); |
| omapfb_put_mem_region(ofbi->region); |
| |
| if (r) { |
| dev_err(fbdev->dev, "failed to setup fb_info\n"); |
| return r; |
| } |
| } |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| struct fb_info *fbi = fbdev->fbs[i]; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| |
| if (ofbi->region->size == 0) |
| continue; |
| |
| omapfb_clear_fb(fbi); |
| } |
| |
| DBG("fb_infos initialized\n"); |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| r = register_framebuffer(fbdev->fbs[i]); |
| if (r != 0) { |
| dev_err(fbdev->dev, |
| "registering framebuffer %d failed\n", i); |
| return r; |
| } |
| } |
| |
| DBG("framebuffers registered\n"); |
| |
| for (i = 0; i < fbdev->num_fbs; i++) { |
| struct fb_info *fbi = fbdev->fbs[i]; |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| |
| omapfb_get_mem_region(ofbi->region); |
| r = omapfb_apply_changes(fbi, 1); |
| omapfb_put_mem_region(ofbi->region); |
| |
| if (r) { |
| dev_err(fbdev->dev, "failed to change mode\n"); |
| return r; |
| } |
| } |
| |
| /* Enable fb0 */ |
| if (fbdev->num_fbs > 0) { |
| struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); |
| |
| if (ofbi->num_overlays > 0) { |
| struct omap_overlay *ovl = ofbi->overlays[0]; |
| |
| ovl->manager->apply(ovl->manager); |
| |
| r = omapfb_overlay_enable(ovl, 1); |
| |
| if (r) { |
| dev_err(fbdev->dev, |
| "failed to enable overlay\n"); |
| return r; |
| } |
| } |
| } |
| |
| DBG("create_framebuffers done\n"); |
| |
| return 0; |
| } |
| |
| static int omapfb_mode_to_timings(const char *mode_str, |
| struct omap_dss_device *display, |
| struct omap_video_timings *timings, u8 *bpp) |
| { |
| struct fb_info *fbi; |
| struct fb_var_screeninfo *var; |
| struct fb_ops *fbops; |
| int r; |
| |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| if (strcmp(mode_str, "pal") == 0) { |
| *timings = omap_dss_pal_timings; |
| *bpp = 24; |
| return 0; |
| } else if (strcmp(mode_str, "ntsc") == 0) { |
| *timings = omap_dss_ntsc_timings; |
| *bpp = 24; |
| return 0; |
| } |
| #endif |
| |
| /* this is quite a hack, but I wanted to use the modedb and for |
| * that we need fb_info and var, so we create dummy ones */ |
| |
| *bpp = 0; |
| fbi = NULL; |
| var = NULL; |
| fbops = NULL; |
| |
| fbi = kzalloc(sizeof(*fbi), GFP_KERNEL); |
| if (fbi == NULL) { |
| r = -ENOMEM; |
| goto err; |
| } |
| |
| var = kzalloc(sizeof(*var), GFP_KERNEL); |
| if (var == NULL) { |
| r = -ENOMEM; |
| goto err; |
| } |
| |
| fbops = kzalloc(sizeof(*fbops), GFP_KERNEL); |
| if (fbops == NULL) { |
| r = -ENOMEM; |
| goto err; |
| } |
| |
| fbi->fbops = fbops; |
| |
| r = fb_find_mode(var, fbi, mode_str, NULL, 0, NULL, 24); |
| if (r == 0) { |
| r = -EINVAL; |
| goto err; |
| } |
| |
| if (display->driver->get_timings) { |
| display->driver->get_timings(display, timings); |
| } else { |
| timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; |
| timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; |
| } |
| |
| timings->pixel_clock = PICOS2KHZ(var->pixclock); |
| timings->hbp = var->left_margin; |
| timings->hfp = var->right_margin; |
| timings->vbp = var->upper_margin; |
| timings->vfp = var->lower_margin; |
| timings->hsw = var->hsync_len; |
| timings->vsw = var->vsync_len; |
| timings->x_res = var->xres; |
| timings->y_res = var->yres; |
| timings->hsync_level = var->sync & FB_SYNC_HOR_HIGH_ACT ? |
| OMAPDSS_SIG_ACTIVE_HIGH : |
| OMAPDSS_SIG_ACTIVE_LOW; |
| timings->vsync_level = var->sync & FB_SYNC_VERT_HIGH_ACT ? |
| OMAPDSS_SIG_ACTIVE_HIGH : |
| OMAPDSS_SIG_ACTIVE_LOW; |
| timings->interlace = var->vmode & FB_VMODE_INTERLACED; |
| |
| switch (var->bits_per_pixel) { |
| case 16: |
| *bpp = 16; |
| break; |
| case 24: |
| case 32: |
| default: |
| *bpp = 24; |
| break; |
| } |
| |
| r = 0; |
| |
| err: |
| kfree(fbi); |
| kfree(var); |
| kfree(fbops); |
| |
| return r; |
| } |
| |
| static int omapfb_set_def_mode(struct omapfb2_device *fbdev, |
| struct omap_dss_device *display, char *mode_str) |
| { |
| int r; |
| u8 bpp; |
| struct omap_video_timings timings, temp_timings; |
| struct omapfb_display_data *d; |
| |
| r = omapfb_mode_to_timings(mode_str, display, &timings, &bpp); |
| if (r) |
| return r; |
| |
| d = get_display_data(fbdev, display); |
| d->bpp_override = bpp; |
| |
| if (display->driver->check_timings) { |
| r = display->driver->check_timings(display, &timings); |
| if (r) |
| return r; |
| } else { |
| /* If check_timings is not present compare xres and yres */ |
| if (display->driver->get_timings) { |
| display->driver->get_timings(display, &temp_timings); |
| |
| if (temp_timings.x_res != timings.x_res || |
| temp_timings.y_res != timings.y_res) |
| return -EINVAL; |
| } |
| } |
| |
| if (display->driver->set_timings) |
| display->driver->set_timings(display, &timings); |
| |
| return 0; |
| } |
| |
| static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev, |
| struct omap_dss_device *dssdev) |
| { |
| struct omapfb_display_data *d; |
| |
| BUG_ON(dssdev->driver->get_recommended_bpp == NULL); |
| |
| d = get_display_data(fbdev, dssdev); |
| |
| if (d->bpp_override != 0) |
| return d->bpp_override; |
| |
| return dssdev->driver->get_recommended_bpp(dssdev); |
| } |
| |
| static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) |
| { |
| char *str, *options, *this_opt; |
| int r = 0; |
| |
| str = kstrdup(def_mode, GFP_KERNEL); |
| if (!str) |
| return -ENOMEM; |
| options = str; |
| |
| while (!r && (this_opt = strsep(&options, ",")) != NULL) { |
| char *p, *display_str, *mode_str; |
| struct omap_dss_device *display; |
| int i; |
| |
| p = strchr(this_opt, ':'); |
| if (!p) { |
| r = -EINVAL; |
| break; |
| } |
| |
| *p = 0; |
| display_str = this_opt; |
| mode_str = p + 1; |
| |
| display = NULL; |
| for (i = 0; i < fbdev->num_displays; ++i) { |
| if (strcmp(fbdev->displays[i].dssdev->name, |
| display_str) == 0) { |
| display = fbdev->displays[i].dssdev; |
| break; |
| } |
| } |
| |
| if (!display) { |
| r = -EINVAL; |
| break; |
| } |
| |
| r = omapfb_set_def_mode(fbdev, display, mode_str); |
| if (r) |
| break; |
| } |
| |
| kfree(str); |
| |
| return r; |
| } |
| |
| static void fb_videomode_to_omap_timings(struct fb_videomode *m, |
| struct omap_dss_device *display, |
| struct omap_video_timings *t) |
| { |
| if (display->driver->get_timings) { |
| display->driver->get_timings(display, t); |
| } else { |
| t->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; |
| t->de_level = OMAPDSS_SIG_ACTIVE_HIGH; |
| t->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; |
| } |
| |
| t->x_res = m->xres; |
| t->y_res = m->yres; |
| t->pixel_clock = PICOS2KHZ(m->pixclock); |
| t->hsw = m->hsync_len; |
| t->hfp = m->right_margin; |
| t->hbp = m->left_margin; |
| t->vsw = m->vsync_len; |
| t->vfp = m->lower_margin; |
| t->vbp = m->upper_margin; |
| t->hsync_level = m->sync & FB_SYNC_HOR_HIGH_ACT ? |
| OMAPDSS_SIG_ACTIVE_HIGH : |
| OMAPDSS_SIG_ACTIVE_LOW; |
| t->vsync_level = m->sync & FB_SYNC_VERT_HIGH_ACT ? |
| OMAPDSS_SIG_ACTIVE_HIGH : |
| OMAPDSS_SIG_ACTIVE_LOW; |
| t->interlace = m->vmode & FB_VMODE_INTERLACED; |
| } |
| |
| static int omapfb_find_best_mode(struct omap_dss_device *display, |
| struct omap_video_timings *timings) |
| { |
| struct fb_monspecs *specs; |
| u8 *edid; |
| int r, i, best_idx, len; |
| |
| if (!display->driver->read_edid) |
| return -ENODEV; |
| |
| len = 0x80 * 2; |
| edid = kmalloc(len, GFP_KERNEL); |
| if (edid == NULL) |
| return -ENOMEM; |
| |
| r = display->driver->read_edid(display, edid, len); |
| if (r < 0) |
| goto err1; |
| |
| specs = kzalloc(sizeof(*specs), GFP_KERNEL); |
| if (specs == NULL) { |
| r = -ENOMEM; |
| goto err1; |
| } |
| |
| fb_edid_to_monspecs(edid, specs); |
| |
| best_idx = -1; |
| |
| for (i = 0; i < specs->modedb_len; ++i) { |
| struct fb_videomode *m; |
| struct omap_video_timings t; |
| |
| m = &specs->modedb[i]; |
| |
| if (m->pixclock == 0) |
| continue; |
| |
| /* skip repeated pixel modes */ |
| if (m->xres == 2880 || m->xres == 1440) |
| continue; |
| |
| if (m->vmode & FB_VMODE_INTERLACED || |
| m->vmode & FB_VMODE_DOUBLE) |
| continue; |
| |
| fb_videomode_to_omap_timings(m, display, &t); |
| |
| r = display->driver->check_timings(display, &t); |
| if (r == 0) { |
| best_idx = i; |
| break; |
| } |
| } |
| |
| if (best_idx == -1) { |
| r = -ENOENT; |
| goto err2; |
| } |
| |
| fb_videomode_to_omap_timings(&specs->modedb[best_idx], display, |
| timings); |
| |
| r = 0; |
| |
| err2: |
| fb_destroy_modedb(specs->modedb); |
| kfree(specs); |
| err1: |
| kfree(edid); |
| |
| return r; |
| } |
| |
| static int omapfb_init_display(struct omapfb2_device *fbdev, |
| struct omap_dss_device *dssdev) |
| { |
| struct omap_dss_driver *dssdrv = dssdev->driver; |
| struct omapfb_display_data *d; |
| int r; |
| |
| r = dssdrv->enable(dssdev); |
| if (r) { |
| dev_warn(fbdev->dev, "Failed to enable display '%s'\n", |
| dssdev->name); |
| return r; |
| } |
| |
| d = get_display_data(fbdev, dssdev); |
| |
| d->fbdev = fbdev; |
| |
| if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { |
| u16 w, h; |
| |
| if (auto_update) { |
| omapfb_start_auto_update(fbdev, dssdev); |
| d->update_mode = OMAPFB_AUTO_UPDATE; |
| } else { |
| d->update_mode = OMAPFB_MANUAL_UPDATE; |
| } |
| |
| if (dssdrv->enable_te) { |
| r = dssdrv->enable_te(dssdev, 1); |
| if (r) { |
| dev_err(fbdev->dev, "Failed to set TE\n"); |
| return r; |
| } |
| } |
| |
| dssdrv->get_resolution(dssdev, &w, &h); |
| r = dssdrv->update(dssdev, 0, 0, w, h); |
| if (r) { |
| dev_err(fbdev->dev, |
| "Failed to update display\n"); |
| return r; |
| } |
| } else { |
| d->update_mode = OMAPFB_AUTO_UPDATE; |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_init_connections(struct omapfb2_device *fbdev, |
| struct omap_dss_device *def_dssdev) |
| { |
| int i, r; |
| struct omap_overlay_manager *mgr; |
| |
| if (!def_dssdev->output) { |
| dev_err(fbdev->dev, "no output for the default display\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < fbdev->num_displays; ++i) { |
| struct omap_dss_device *dssdev = fbdev->displays[i].dssdev; |
| struct omap_dss_output *out = dssdev->output; |
| |
| mgr = omap_dss_get_overlay_manager(out->dispc_channel); |
| |
| if (!mgr || !out) |
| continue; |
| |
| if (mgr->output) |
| mgr->unset_output(mgr); |
| |
| mgr->set_output(mgr, out); |
| } |
| |
| mgr = def_dssdev->output->manager; |
| |
| if (!mgr) { |
| dev_err(fbdev->dev, "no ovl manager for the default display\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < fbdev->num_overlays; i++) { |
| struct omap_overlay *ovl = fbdev->overlays[i]; |
| |
| if (ovl->manager) |
| ovl->unset_manager(ovl); |
| |
| r = ovl->set_manager(ovl, mgr); |
| if (r) |
| dev_warn(fbdev->dev, |
| "failed to connect overlay %s to manager %s\n", |
| ovl->name, mgr->name); |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_probe(struct platform_device *pdev) |
| { |
| struct omapfb2_device *fbdev = NULL; |
| int r = 0; |
| int i; |
| struct omap_dss_device *def_display; |
| struct omap_dss_device *dssdev; |
| |
| DBG("omapfb_probe\n"); |
| |
| if (omapdss_is_initialized() == false) |
| return -EPROBE_DEFER; |
| |
| if (pdev->num_resources != 0) { |
| dev_err(&pdev->dev, "probed for an unknown device\n"); |
| r = -ENODEV; |
| goto err0; |
| } |
| |
| fbdev = devm_kzalloc(&pdev->dev, sizeof(struct omapfb2_device), |
| GFP_KERNEL); |
| if (fbdev == NULL) { |
| r = -ENOMEM; |
| goto err0; |
| } |
| |
| if (def_vrfb && !omap_vrfb_supported()) { |
| def_vrfb = 0; |
| dev_warn(&pdev->dev, "VRFB is not supported on this hardware, " |
| "ignoring the module parameter vrfb=y\n"); |
| } |
| |
| r = omapdss_compat_init(); |
| if (r) |
| goto err0; |
| |
| mutex_init(&fbdev->mtx); |
| |
| fbdev->dev = &pdev->dev; |
| platform_set_drvdata(pdev, fbdev); |
| |
| fbdev->num_displays = 0; |
| dssdev = NULL; |
| for_each_dss_dev(dssdev) { |
| struct omapfb_display_data *d; |
| |
| omap_dss_get_device(dssdev); |
| |
| if (!dssdev->driver) { |
| dev_warn(&pdev->dev, "no driver for display: %s\n", |
| dssdev->name); |
| omap_dss_put_device(dssdev); |
| continue; |
| } |
| |
| d = &fbdev->displays[fbdev->num_displays++]; |
| d->dssdev = dssdev; |
| if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) |
| d->update_mode = OMAPFB_MANUAL_UPDATE; |
| else |
| d->update_mode = OMAPFB_AUTO_UPDATE; |
| } |
| |
| if (fbdev->num_displays == 0) { |
| dev_err(&pdev->dev, "no displays\n"); |
| r = -EPROBE_DEFER; |
| goto cleanup; |
| } |
| |
| fbdev->num_overlays = omap_dss_get_num_overlays(); |
| for (i = 0; i < fbdev->num_overlays; i++) |
| fbdev->overlays[i] = omap_dss_get_overlay(i); |
| |
| fbdev->num_managers = omap_dss_get_num_overlay_managers(); |
| for (i = 0; i < fbdev->num_managers; i++) |
| fbdev->managers[i] = omap_dss_get_overlay_manager(i); |
| |
| def_display = NULL; |
| |
| for (i = 0; i < fbdev->num_displays; ++i) { |
| struct omap_dss_device *dssdev; |
| const char *def_name; |
| |
| def_name = omapdss_get_default_display_name(); |
| |
| dssdev = fbdev->displays[i].dssdev; |
| |
| if (def_name == NULL || |
| (dssdev->name && strcmp(def_name, dssdev->name) == 0)) { |
| def_display = dssdev; |
| break; |
| } |
| } |
| |
| if (def_display == NULL) { |
| dev_err(fbdev->dev, "failed to find default display\n"); |
| r = -EINVAL; |
| goto cleanup; |
| } |
| |
| r = omapfb_init_connections(fbdev, def_display); |
| if (r) { |
| dev_err(fbdev->dev, "failed to init overlay connections\n"); |
| goto cleanup; |
| } |
| |
| if (def_mode && strlen(def_mode) > 0) { |
| if (omapfb_parse_def_modes(fbdev)) |
| dev_warn(&pdev->dev, "cannot parse default modes\n"); |
| } else if (def_display && def_display->driver->set_timings && |
| def_display->driver->check_timings) { |
| struct omap_video_timings t; |
| |
| r = omapfb_find_best_mode(def_display, &t); |
| |
| if (r == 0) |
| def_display->driver->set_timings(def_display, &t); |
| } |
| |
| r = omapfb_create_framebuffers(fbdev); |
| if (r) |
| goto cleanup; |
| |
| for (i = 0; i < fbdev->num_managers; i++) { |
| struct omap_overlay_manager *mgr; |
| mgr = fbdev->managers[i]; |
| r = mgr->apply(mgr); |
| if (r) |
| dev_warn(fbdev->dev, "failed to apply dispc config\n"); |
| } |
| |
| DBG("mgr->apply'ed\n"); |
| |
| if (def_display) { |
| r = omapfb_init_display(fbdev, def_display); |
| if (r) { |
| dev_err(fbdev->dev, |
| "failed to initialize default " |
| "display\n"); |
| goto cleanup; |
| } |
| } |
| |
| DBG("create sysfs for fbs\n"); |
| r = omapfb_create_sysfs(fbdev); |
| if (r) { |
| dev_err(fbdev->dev, "failed to create sysfs entries\n"); |
| goto cleanup; |
| } |
| |
| return 0; |
| |
| cleanup: |
| omapfb_free_resources(fbdev); |
| omapdss_compat_uninit(); |
| err0: |
| dev_err(&pdev->dev, "failed to setup omapfb\n"); |
| return r; |
| } |
| |
| static int __exit omapfb_remove(struct platform_device *pdev) |
| { |
| struct omapfb2_device *fbdev = platform_get_drvdata(pdev); |
| |
| /* FIXME: wait till completion of pending events */ |
| |
| omapfb_remove_sysfs(fbdev); |
| |
| omapfb_free_resources(fbdev); |
| |
| omapdss_compat_uninit(); |
| |
| return 0; |
| } |
| |
| static struct platform_driver omapfb_driver = { |
| .probe = omapfb_probe, |
| .remove = __exit_p(omapfb_remove), |
| .driver = { |
| .name = "omapfb", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_param_named(mode, def_mode, charp, 0); |
| module_param_named(vram, def_vram, charp, 0); |
| module_param_named(rotate, def_rotate, int, 0); |
| module_param_named(vrfb, def_vrfb, bool, 0); |
| module_param_named(mirror, def_mirror, bool, 0); |
| |
| module_platform_driver(omapfb_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); |
| MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); |
| MODULE_LICENSE("GPL v2"); |