| /* |
| Driver for Philips TDA8083 based QPSK Demodulator |
| |
| Copyright (C) 2001 Convergence Integrated Media GmbH |
| |
| written by Ralph Metzler <ralph@convergence.de> |
| |
| adoption to the new DVB frontend API and diagnostic ioctl's |
| by Holger Waechtler <holger@convergence.de> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include "dvb_frontend.h" |
| #include "tda8083.h" |
| |
| |
| struct tda8083_state { |
| struct i2c_adapter* i2c; |
| /* configuration settings */ |
| const struct tda8083_config* config; |
| struct dvb_frontend frontend; |
| }; |
| |
| static int debug; |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) printk(KERN_DEBUG "tda8083: " args); \ |
| } while (0) |
| |
| |
| static u8 tda8083_init_tab [] = { |
| 0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea, |
| 0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10, |
| 0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8, |
| 0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00, |
| 0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| |
| static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data) |
| { |
| int ret; |
| u8 buf [] = { reg, data }; |
| struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| dprintk ("%s: writereg error (reg %02x, ret == %i)\n", |
| __func__, reg, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len) |
| { |
| int ret; |
| struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = ®1, .len = 1 }, |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b, .len = len } }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| dprintk ("%s: readreg error (reg %02x, ret == %i)\n", |
| __func__, reg1, ret); |
| |
| return ret == 2 ? 0 : -1; |
| } |
| |
| static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg) |
| { |
| u8 val; |
| |
| tda8083_readregs (state, reg, &val, 1); |
| |
| return val; |
| } |
| |
| static int tda8083_set_inversion (struct tda8083_state* state, fe_spectral_inversion_t inversion) |
| { |
| /* XXX FIXME: implement other modes than FEC_AUTO */ |
| if (inversion == INVERSION_AUTO) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static int tda8083_set_fec (struct tda8083_state* state, fe_code_rate_t fec) |
| { |
| if (fec == FEC_AUTO) |
| return tda8083_writereg (state, 0x07, 0xff); |
| |
| if (fec >= FEC_1_2 && fec <= FEC_8_9) |
| return tda8083_writereg (state, 0x07, 1 << (FEC_8_9 - fec)); |
| |
| return -EINVAL; |
| } |
| |
| static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state) |
| { |
| u8 index; |
| static fe_code_rate_t fec_tab [] = { FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4, |
| FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8 }; |
| |
| index = tda8083_readreg(state, 0x0e) & 0x07; |
| |
| return fec_tab [index]; |
| } |
| |
| static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate) |
| { |
| u32 ratio; |
| u32 tmp; |
| u8 filter; |
| |
| if (srate > 32000000) |
| srate = 32000000; |
| if (srate < 500000) |
| srate = 500000; |
| |
| filter = 0; |
| if (srate < 24000000) |
| filter = 2; |
| if (srate < 16000000) |
| filter = 3; |
| |
| tmp = 31250 << 16; |
| ratio = tmp / srate; |
| |
| tmp = (tmp % srate) << 8; |
| ratio = (ratio << 8) + tmp / srate; |
| |
| tmp = (tmp % srate) << 8; |
| ratio = (ratio << 8) + tmp / srate; |
| |
| dprintk("tda8083: ratio == %08x\n", (unsigned int) ratio); |
| |
| tda8083_writereg (state, 0x05, filter); |
| tda8083_writereg (state, 0x02, (ratio >> 16) & 0xff); |
| tda8083_writereg (state, 0x03, (ratio >> 8) & 0xff); |
| tda8083_writereg (state, 0x04, (ratio ) & 0xff); |
| |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 1; |
| } |
| |
| static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout) |
| { |
| unsigned long start = jiffies; |
| |
| while (jiffies - start < timeout && |
| !(tda8083_readreg(state, 0x02) & 0x80)) |
| { |
| msleep(50); |
| }; |
| } |
| |
| static int tda8083_set_tone (struct tda8083_state* state, fe_sec_tone_mode_t tone) |
| { |
| tda8083_writereg (state, 0x26, 0xf1); |
| |
| switch (tone) { |
| case SEC_TONE_OFF: |
| return tda8083_writereg (state, 0x29, 0x00); |
| case SEC_TONE_ON: |
| return tda8083_writereg (state, 0x29, 0x80); |
| default: |
| return -EINVAL; |
| }; |
| } |
| |
| static int tda8083_set_voltage (struct tda8083_state* state, fe_sec_voltage_t voltage) |
| { |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| return tda8083_writereg (state, 0x20, 0x00); |
| case SEC_VOLTAGE_18: |
| return tda8083_writereg (state, 0x20, 0x11); |
| default: |
| return -EINVAL; |
| }; |
| } |
| |
| static int tda8083_send_diseqc_burst (struct tda8083_state* state, fe_sec_mini_cmd_t burst) |
| { |
| switch (burst) { |
| case SEC_MINI_A: |
| tda8083_writereg (state, 0x29, (5 << 2)); /* send burst A */ |
| break; |
| case SEC_MINI_B: |
| tda8083_writereg (state, 0x29, (7 << 2)); /* send B */ |
| break; |
| default: |
| return -EINVAL; |
| }; |
| |
| tda8083_wait_diseqc_fifo (state, 100); |
| |
| return 0; |
| } |
| |
| static int tda8083_send_diseqc_msg (struct dvb_frontend* fe, |
| struct dvb_diseqc_master_cmd *m) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| int i; |
| |
| tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */ |
| |
| for (i=0; i<m->msg_len; i++) |
| tda8083_writereg (state, 0x23 + i, m->msg[i]); |
| |
| tda8083_writereg (state, 0x29, (m->msg_len - 3) | (3 << 2)); /* send!! */ |
| |
| tda8083_wait_diseqc_fifo (state, 100); |
| |
| return 0; |
| } |
| |
| static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| u8 signal = ~tda8083_readreg (state, 0x01); |
| u8 sync = tda8083_readreg (state, 0x02); |
| |
| *status = 0; |
| |
| if (signal > 10) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (sync & 0x01) |
| *status |= FE_HAS_CARRIER; |
| |
| if (sync & 0x02) |
| *status |= FE_HAS_VITERBI; |
| |
| if (sync & 0x10) |
| *status |= FE_HAS_SYNC; |
| |
| if (sync & 0x20) /* frontend can not lock */ |
| *status |= FE_TIMEDOUT; |
| |
| if ((sync & 0x1f) == 0x1f) |
| *status |= FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int tda8083_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3]; |
| |
| if ((ret = tda8083_readregs(state, 0x0b, buf, sizeof(buf)))) |
| return ret; |
| |
| *ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2]; |
| |
| return 0; |
| } |
| |
| static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| u8 signal = ~tda8083_readreg (state, 0x01); |
| *strength = (signal << 8) | signal; |
| |
| return 0; |
| } |
| |
| static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| u8 _snr = tda8083_readreg (state, 0x08); |
| *snr = (_snr << 8) | _snr; |
| |
| return 0; |
| } |
| |
| static int tda8083_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| *ucblocks = tda8083_readreg(state, 0x0f); |
| if (*ucblocks == 0xff) |
| *ucblocks = 0xffffffff; |
| |
| return 0; |
| } |
| |
| static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| if (fe->ops.tuner_ops.set_params) { |
| fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| tda8083_set_inversion (state, p->inversion); |
| tda8083_set_fec (state, p->u.qpsk.fec_inner); |
| tda8083_set_symbolrate (state, p->u.qpsk.symbol_rate); |
| |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 0; |
| } |
| |
| static int tda8083_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| /* FIXME: get symbolrate & frequency offset...*/ |
| /*p->frequency = ???;*/ |
| p->inversion = (tda8083_readreg (state, 0x0e) & 0x80) ? |
| INVERSION_ON : INVERSION_OFF; |
| p->u.qpsk.fec_inner = tda8083_get_fec (state); |
| /*p->u.qpsk.symbol_rate = tda8083_get_symbolrate (state);*/ |
| |
| return 0; |
| } |
| |
| static int tda8083_sleep(struct dvb_frontend* fe) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| tda8083_writereg (state, 0x00, 0x02); |
| return 0; |
| } |
| |
| static int tda8083_init(struct dvb_frontend* fe) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| int i; |
| |
| for (i=0; i<44; i++) |
| tda8083_writereg (state, i, tda8083_init_tab[i]); |
| |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 0; |
| } |
| |
| static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| tda8083_send_diseqc_burst (state, burst); |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 0; |
| } |
| |
| static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| tda8083_set_tone (state, tone); |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 0; |
| } |
| |
| static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| |
| tda8083_set_voltage (state, voltage); |
| tda8083_writereg (state, 0x00, 0x3c); |
| tda8083_writereg (state, 0x00, 0x04); |
| |
| return 0; |
| } |
| |
| static void tda8083_release(struct dvb_frontend* fe) |
| { |
| struct tda8083_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops tda8083_ops; |
| |
| struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct tda8083_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL); |
| if (state == NULL) goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| |
| /* check if the demod is there */ |
| if ((tda8083_readreg(state, 0x00)) != 0x05) goto error; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &tda8083_ops, sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops tda8083_ops = { |
| |
| .info = { |
| .name = "Philips TDA8083 DVB-S", |
| .type = FE_QPSK, |
| .frequency_min = 920000, /* TDA8060 */ |
| .frequency_max = 2200000, /* TDA8060 */ |
| .frequency_stepsize = 125, /* kHz for QPSK frontends */ |
| /* .frequency_tolerance = ???,*/ |
| .symbol_rate_min = 12000000, |
| .symbol_rate_max = 30000000, |
| /* .symbol_rate_tolerance = ???,*/ |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | |
| FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_MUTE_TS |
| }, |
| |
| .release = tda8083_release, |
| |
| .init = tda8083_init, |
| .sleep = tda8083_sleep, |
| |
| .set_frontend_legacy = tda8083_set_frontend, |
| .get_frontend = tda8083_get_frontend, |
| |
| .read_status = tda8083_read_status, |
| .read_signal_strength = tda8083_read_signal_strength, |
| .read_snr = tda8083_read_snr, |
| .read_ber = tda8083_read_ber, |
| .read_ucblocks = tda8083_read_ucblocks, |
| |
| .diseqc_send_master_cmd = tda8083_send_diseqc_msg, |
| .diseqc_send_burst = tda8083_diseqc_send_burst, |
| .set_tone = tda8083_diseqc_set_tone, |
| .set_voltage = tda8083_diseqc_set_voltage, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_DESCRIPTION("Philips TDA8083 DVB-S Demodulator"); |
| MODULE_AUTHOR("Ralph Metzler, Holger Waechtler"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(tda8083_attach); |