arch/arm/common/gic.c - kernel/msm-4.19 - Gitiles

 /*
  *  linux/arch/arm/common/gic.c
  *
  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * Interrupt architecture for the GIC:
  *
  * o There is one Interrupt Distributor, which receives interrupts
  *   from system devices and sends them to the Interrupt Controllers.
  *
  * o There is one CPU Interface per CPU, which sends interrupts sent
  *   by the Distributor, and interrupts generated locally, to the
  *   associated CPU. The base address of the CPU interface is usually
  *   aliased so that the same address points to different chips depending
  *   on the CPU it is accessed from.
  *
  * Note that IRQs 0-31 are special - they are local to each CPU.
  * As such, the enable set/clear, pending set/clear and active bit
  * registers are banked per-cpu for these sources.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>

 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>

 static DEFINE_SPINLOCK(irq_controller_lock);

 /* Address of GIC 0 CPU interface */
 void __iomem *gic_cpu_base_addr __read_mostly;

 struct gic_chip_data {
 	unsigned int irq_offset;
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 };

 #ifndef MAX_GIC_NR
 #define MAX_GIC_NR	1
 #endif

 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;

 static inline void __iomem *gic_dist_base(unsigned int irq)
 {
 	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
 	return gic_data->dist_base;
 }

 static inline void __iomem *gic_cpu_base(unsigned int irq)
 {
 	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
 	return gic_data->cpu_base;
 }

 static inline unsigned int gic_irq(unsigned int irq)
 {
 	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
 	return irq - gic_data->irq_offset;
 }

 /*
  * Routines to acknowledge, disable and enable interrupts
  */
 static void gic_ack_irq(unsigned int irq)
 {

 	spin_lock(&irq_controller_lock);
 	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }

 static void gic_mask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);

 	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }

 static void gic_unmask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);

 	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }

 static int gic_set_type(unsigned int irq, unsigned int type)
 {
 	void __iomem *base = gic_dist_base(irq);
 	unsigned int gicirq = gic_irq(irq);
 	u32 enablemask = 1 << (gicirq % 32);
 	u32 enableoff = (gicirq / 32) * 4;
 	u32 confmask = 0x2 << ((gicirq % 16) * 2);
 	u32 confoff = (gicirq / 16) * 4;
 	bool enabled = false;
 	u32 val;

 	/* Interrupt configuration for SGIs can't be changed */
 	if (gicirq < 16)
 		return -EINVAL;

 	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
 		return -EINVAL;

 	spin_lock(&irq_controller_lock);

 	val = readl(base + GIC_DIST_CONFIG + confoff);
 	if (type == IRQ_TYPE_LEVEL_HIGH)
 		val &= ~confmask;
 	else if (type == IRQ_TYPE_EDGE_RISING)
 		val |= confmask;

 	/*
 	 * As recommended by the spec, disable the interrupt before changing
 	 * the configuration
 	 */
 	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
 		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
 		enabled = true;
 	}

 	writel(val, base + GIC_DIST_CONFIG + confoff);

 	if (enabled)
 		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);

 	spin_unlock(&irq_controller_lock);

 	return 0;
 }

 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
 	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = cpumask_first(mask_val);
 	u32 val;
 	struct irq_desc *desc;

 	spin_lock(&irq_controller_lock);
 	desc = irq_to_desc(irq);
 	if (desc == NULL) {
 		spin_unlock(&irq_controller_lock);
 		return -EINVAL;
 	}
 	desc->node = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
 	spin_unlock(&irq_controller_lock);

 	return 0;
 }
 #endif

 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = get_irq_data(irq);
 	struct irq_chip *chip = get_irq_chip(irq);
 	unsigned int cascade_irq, gic_irq;
 	unsigned long status;

 	/* primary controller ack'ing */
 	chip->ack(irq);

 	spin_lock(&irq_controller_lock);
 	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
 	spin_unlock(&irq_controller_lock);

 	gic_irq = (status & 0x3ff);
 	if (gic_irq == 1023)
 		goto out;

 	cascade_irq = gic_irq + chip_data->irq_offset;
 	if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
 		do_bad_IRQ(cascade_irq, desc);
 	else
 		generic_handle_irq(cascade_irq);

  out:
 	/* primary controller unmasking */
 	chip->unmask(irq);
 }

 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
 	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif
 };

 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 {
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
 		BUG();
 	set_irq_chained_handler(irq, gic_handle_cascade_irq);
 }

 static void __init gic_dist_init(struct gic_chip_data *gic,
 	unsigned int irq_start)
 {
 	unsigned int gic_irqs, irq_limit, i;
 	void __iomem *base = gic->dist_base;
 	u32 cpumask = 1 << smp_processor_id();

 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;

 	writel(0, base + GIC_DIST_CTRL);

 	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
 	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;

 	/*
 	 * Set all global interrupts to be level triggered, active low.
 	 */
 	for (i = 32; i < gic_irqs; i += 16)
 		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);

 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);

 	/*
 	 * Set priority on all global interrupts.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);

 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as these enables are banked registers.
 	 */
 	for (i = 32; i < gic_irqs; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);

 	/*
 	 * Limit number of interrupts registered to the platform maximum
 	 */
 	irq_limit = gic->irq_offset + gic_irqs;
 	if (WARN_ON(irq_limit > NR_IRQS))
 		irq_limit = NR_IRQS;

 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
 	for (i = irq_start; i < irq_limit; i++) {
 		set_irq_chip(i, &gic_chip);
 		set_irq_chip_data(i, gic);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}

 	writel(1, base + GIC_DIST_CTRL);
 }

 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
 	void __iomem *dist_base = gic->dist_base;
 	void __iomem *base = gic->cpu_base;
 	int i;

 	/*
 	 * Deal with the banked PPI and SGI interrupts - disable all
 	 * PPI interrupts, ensure all SGI interrupts are enabled.
 	 */
 	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
 	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);

 	/*
 	 * Set priority on PPI and SGI interrupts
 	 */
 	for (i = 0; i < 32; i += 4)
 		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);

 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }

 void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
 	void __iomem *dist_base, void __iomem *cpu_base)
 {
 	struct gic_chip_data *gic;

 	BUG_ON(gic_nr >= MAX_GIC_NR);

 	gic = &gic_data[gic_nr];
 	gic->dist_base = dist_base;
 	gic->cpu_base = cpu_base;
 	gic->irq_offset = (irq_start - 1) & ~31;

 	if (gic_nr == 0)
 		gic_cpu_base_addr = cpu_base;

 	gic_dist_init(gic, irq_start);
 	gic_cpu_init(gic);
 }

 void __cpuinit gic_secondary_init(unsigned int gic_nr)
 {
 	BUG_ON(gic_nr >= MAX_GIC_NR);

 	gic_cpu_init(&gic_data[gic_nr]);
 }

 void __cpuinit gic_enable_ppi(unsigned int irq)
 {
 	unsigned long flags;

 	local_irq_save(flags);
 	irq_to_desc(irq)->status |= IRQ_NOPROBE;
 	gic_unmask_irq(irq);
 	local_irq_restore(flags);
 }

 #ifdef CONFIG_SMP
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(*mask);

 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
	/*
	* linux/arch/arm/common/gic.c
	*
	* Copyright (C) 2002 ARM Limited, All Rights Reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* Interrupt architecture for the GIC:
	*
	* o There is one Interrupt Distributor, which receives interrupts
	* from system devices and sends them to the Interrupt Controllers.
	*
	* o There is one CPU Interface per CPU, which sends interrupts sent
	* by the Distributor, and interrupts generated locally, to the
	* associated CPU. The base address of the CPU interface is usually
	* aliased so that the same address points to different chips depending
	* on the CPU it is accessed from.
	*
	* Note that IRQs 0-31 are special - they are local to each CPU.
	* As such, the enable set/clear, pending set/clear and active bit
	* registers are banked per-cpu for these sources.
	*/
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/list.h>
	#include <linux/smp.h>
	#include <linux/cpumask.h>
	#include <linux/io.h>

	#include <asm/irq.h>
	#include <asm/mach/irq.h>
	#include <asm/hardware/gic.h>

	static DEFINE_SPINLOCK(irq_controller_lock);

	/* Address of GIC 0 CPU interface */
	void __iomem *gic_cpu_base_addr __read_mostly;

	struct gic_chip_data {
	unsigned int irq_offset;
	void __iomem *dist_base;
	void __iomem *cpu_base;
	};

	#ifndef MAX_GIC_NR
	#define MAX_GIC_NR 1
	#endif

	static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;

	static inline void __iomem *gic_dist_base(unsigned int irq)
	{
	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
	return gic_data->dist_base;
	}

	static inline void __iomem *gic_cpu_base(unsigned int irq)
	{
	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
	return gic_data->cpu_base;
	}

	static inline unsigned int gic_irq(unsigned int irq)
	{
	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
	return irq - gic_data->irq_offset;
	}

	/*
	* Routines to acknowledge, disable and enable interrupts
	*/
	static void gic_ack_irq(unsigned int irq)
	{

	spin_lock(&irq_controller_lock);
	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
	spin_unlock(&irq_controller_lock);
	}

	static void gic_mask_irq(unsigned int irq)
	{
	u32 mask = 1 << (irq % 32);

	spin_lock(&irq_controller_lock);
	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
	spin_unlock(&irq_controller_lock);
	}

	static void gic_unmask_irq(unsigned int irq)
	{
	u32 mask = 1 << (irq % 32);

	spin_lock(&irq_controller_lock);
	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
	spin_unlock(&irq_controller_lock);
	}

	static int gic_set_type(unsigned int irq, unsigned int type)
	{
	void __iomem *base = gic_dist_base(irq);
	unsigned int gicirq = gic_irq(irq);
	u32 enablemask = 1 << (gicirq % 32);
	u32 enableoff = (gicirq / 32) * 4;
	u32 confmask = 0x2 << ((gicirq % 16) * 2);
	u32 confoff = (gicirq / 16) * 4;
	bool enabled = false;
	u32 val;

	/* Interrupt configuration for SGIs can't be changed */
	if (gicirq < 16)
	return -EINVAL;

	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
	return -EINVAL;

	spin_lock(&irq_controller_lock);

	val = readl(base + GIC_DIST_CONFIG + confoff);
	if (type == IRQ_TYPE_LEVEL_HIGH)
	val &= ~confmask;
	else if (type == IRQ_TYPE_EDGE_RISING)
	val \|= confmask;

	/*
	* As recommended by the spec, disable the interrupt before changing
	* the configuration
	*/
	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
	writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
	enabled = true;
	}

	writel(val, base + GIC_DIST_CONFIG + confoff);

	if (enabled)
	writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);

	spin_unlock(&irq_controller_lock);

	return 0;
	}

	#ifdef CONFIG_SMP
	static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
	{
	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
	unsigned int shift = (irq % 4) * 8;
	unsigned int cpu = cpumask_first(mask_val);
	u32 val;
	struct irq_desc *desc;

	spin_lock(&irq_controller_lock);
	desc = irq_to_desc(irq);
	if (desc == NULL) {
	spin_unlock(&irq_controller_lock);
	return -EINVAL;
	}
	desc->node = cpu;
	val = readl(reg) & ~(0xff << shift);
	val \|= 1 << (cpu + shift);
	writel(val, reg);
	spin_unlock(&irq_controller_lock);

	return 0;
	}
	#endif

	static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
	{
	struct gic_chip_data *chip_data = get_irq_data(irq);
	struct irq_chip *chip = get_irq_chip(irq);
	unsigned int cascade_irq, gic_irq;
	unsigned long status;

	/* primary controller ack'ing */
	chip->ack(irq);

	spin_lock(&irq_controller_lock);
	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
	spin_unlock(&irq_controller_lock);

	gic_irq = (status & 0x3ff);
	if (gic_irq == 1023)
	goto out;

	cascade_irq = gic_irq + chip_data->irq_offset;
	if (unlikely(gic_irq < 32 \|\| gic_irq > 1020 \|\| cascade_irq >= NR_IRQS))
	do_bad_IRQ(cascade_irq, desc);
	else
	generic_handle_irq(cascade_irq);

	out:
	/* primary controller unmasking */
	chip->unmask(irq);
	}

	static struct irq_chip gic_chip = {
	.name = "GIC",
	.ack = gic_ack_irq,
	.mask = gic_mask_irq,
	.unmask = gic_unmask_irq,
	.set_type = gic_set_type,
	#ifdef CONFIG_SMP
	.set_affinity = gic_set_cpu,
	#endif
	};

	void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
	{
	if (gic_nr >= MAX_GIC_NR)
	BUG();
	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
	BUG();
	set_irq_chained_handler(irq, gic_handle_cascade_irq);
	}

	static void __init gic_dist_init(struct gic_chip_data *gic,
	unsigned int irq_start)
	{
	unsigned int gic_irqs, irq_limit, i;
	void __iomem *base = gic->dist_base;
	u32 cpumask = 1 << smp_processor_id();

	cpumask \|= cpumask << 8;
	cpumask \|= cpumask << 16;

	writel(0, base + GIC_DIST_CTRL);

	/*
	* Find out how many interrupts are supported.
	* The GIC only supports up to 1020 interrupt sources.
	*/
	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
	gic_irqs = (gic_irqs + 1) * 32;
	if (gic_irqs > 1020)
	gic_irqs = 1020;

	/*
	* Set all global interrupts to be level triggered, active low.
	*/
	for (i = 32; i < gic_irqs; i += 16)
	writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);

	/*
	* Set all global interrupts to this CPU only.
	*/
	for (i = 32; i < gic_irqs; i += 4)
	writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);

	/*
	* Set priority on all global interrupts.
	*/
	for (i = 32; i < gic_irqs; i += 4)
	writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);

	/*
	* Disable all interrupts. Leave the PPI and SGIs alone
	* as these enables are banked registers.
	*/
	for (i = 32; i < gic_irqs; i += 32)
	writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);

	/*
	* Limit number of interrupts registered to the platform maximum
	*/
	irq_limit = gic->irq_offset + gic_irqs;
	if (WARN_ON(irq_limit > NR_IRQS))
	irq_limit = NR_IRQS;

	/*
	* Setup the Linux IRQ subsystem.
	*/
	for (i = irq_start; i < irq_limit; i++) {
	set_irq_chip(i, &gic_chip);
	set_irq_chip_data(i, gic);
	set_irq_handler(i, handle_level_irq);
	set_irq_flags(i, IRQF_VALID \| IRQF_PROBE);
	}

	writel(1, base + GIC_DIST_CTRL);
	}

	static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
	{
	void __iomem *dist_base = gic->dist_base;
	void __iomem *base = gic->cpu_base;
	int i;

	/*
	* Deal with the banked PPI and SGI interrupts - disable all
	* PPI interrupts, ensure all SGI interrupts are enabled.
	*/
	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);

	/*
	* Set priority on PPI and SGI interrupts
	*/
	for (i = 0; i < 32; i += 4)
	writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);

	writel(0xf0, base + GIC_CPU_PRIMASK);
	writel(1, base + GIC_CPU_CTRL);
	}

	void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
	void __iomem dist_base, void __iomem cpu_base)
	{
	struct gic_chip_data *gic;

	BUG_ON(gic_nr >= MAX_GIC_NR);

	gic = &gic_data[gic_nr];
	gic->dist_base = dist_base;
	gic->cpu_base = cpu_base;
	gic->irq_offset = (irq_start - 1) & ~31;

	if (gic_nr == 0)
	gic_cpu_base_addr = cpu_base;

	gic_dist_init(gic, irq_start);
	gic_cpu_init(gic);
	}

	void __cpuinit gic_secondary_init(unsigned int gic_nr)
	{
	BUG_ON(gic_nr >= MAX_GIC_NR);

	gic_cpu_init(&gic_data[gic_nr]);
	}

	void __cpuinit gic_enable_ppi(unsigned int irq)
	{
	unsigned long flags;

	local_irq_save(flags);
	irq_to_desc(irq)->status \|= IRQ_NOPROBE;
	gic_unmask_irq(irq);
	local_irq_restore(flags);
	}

	#ifdef CONFIG_SMP
	void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
	{
	unsigned long map = cpus_addr(mask);

	/* this always happens on GIC0 */
	writel(map << 16 \| irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
	}
	#endif