| /****************************************************************************** |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/wireless.h> |
| #include <net/mac80211.h> |
| #include <linux/etherdevice.h> |
| #include <asm/unaligned.h> |
| #include <linux/stringify.h> |
| |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-io.h" |
| #include "iwl-sta.h" |
| #include "iwl-agn.h" |
| #include "iwl-helpers.h" |
| #include "iwl-agn-hw.h" |
| #include "iwl-6000-hw.h" |
| #include "iwl-trans.h" |
| |
| /* Highest firmware API version supported */ |
| #define IWL6000_UCODE_API_MAX 4 |
| #define IWL6050_UCODE_API_MAX 5 |
| #define IWL6000G2_UCODE_API_MAX 5 |
| |
| /* Lowest firmware API version supported */ |
| #define IWL6000_UCODE_API_MIN 4 |
| #define IWL6050_UCODE_API_MIN 4 |
| #define IWL6000G2_UCODE_API_MIN 4 |
| |
| #define IWL6000_FW_PRE "iwlwifi-6000-" |
| #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" |
| |
| #define IWL6050_FW_PRE "iwlwifi-6050-" |
| #define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" |
| |
| #define IWL6005_FW_PRE "iwlwifi-6000g2a-" |
| #define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" |
| |
| #define IWL6030_FW_PRE "iwlwifi-6000g2b-" |
| #define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" |
| |
| static void iwl6000_set_ct_threshold(struct iwl_priv *priv) |
| { |
| /* want Celsius */ |
| priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; |
| priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; |
| } |
| |
| static void iwl6050_additional_nic_config(struct iwl_priv *priv) |
| { |
| /* Indicate calibration version to uCode. */ |
| if (iwlagn_eeprom_calib_version(priv) >= 6) |
| iwl_set_bit(priv, CSR_GP_DRIVER_REG, |
| CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); |
| } |
| |
| static void iwl6150_additional_nic_config(struct iwl_priv *priv) |
| { |
| /* Indicate calibration version to uCode. */ |
| if (iwlagn_eeprom_calib_version(priv) >= 6) |
| iwl_set_bit(priv, CSR_GP_DRIVER_REG, |
| CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); |
| iwl_set_bit(priv, CSR_GP_DRIVER_REG, |
| CSR_GP_DRIVER_REG_BIT_6050_1x2); |
| } |
| |
| /* NIC configuration for 6000 series */ |
| static void iwl6000_nic_config(struct iwl_priv *priv) |
| { |
| iwl_rf_config(priv); |
| |
| /* no locking required for register write */ |
| if (priv->cfg->pa_type == IWL_PA_INTERNAL) { |
| /* 2x2 IPA phy type */ |
| iwl_write32(priv, CSR_GP_DRIVER_REG, |
| CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); |
| } |
| /* do additional nic configuration if needed */ |
| if (priv->cfg->ops->nic && |
| priv->cfg->ops->nic->additional_nic_config) { |
| priv->cfg->ops->nic->additional_nic_config(priv); |
| } |
| } |
| |
| static struct iwl_sensitivity_ranges iwl6000_sensitivity = { |
| .min_nrg_cck = 97, |
| .max_nrg_cck = 0, /* not used, set to 0 */ |
| .auto_corr_min_ofdm = 80, |
| .auto_corr_min_ofdm_mrc = 128, |
| .auto_corr_min_ofdm_x1 = 105, |
| .auto_corr_min_ofdm_mrc_x1 = 192, |
| |
| .auto_corr_max_ofdm = 145, |
| .auto_corr_max_ofdm_mrc = 232, |
| .auto_corr_max_ofdm_x1 = 110, |
| .auto_corr_max_ofdm_mrc_x1 = 232, |
| |
| .auto_corr_min_cck = 125, |
| .auto_corr_max_cck = 175, |
| .auto_corr_min_cck_mrc = 160, |
| .auto_corr_max_cck_mrc = 310, |
| .nrg_th_cck = 97, |
| .nrg_th_ofdm = 100, |
| |
| .barker_corr_th_min = 190, |
| .barker_corr_th_min_mrc = 390, |
| .nrg_th_cca = 62, |
| }; |
| |
| static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) |
| { |
| if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES && |
| iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES) |
| priv->cfg->base_params->num_of_queues = |
| iwlagn_mod_params.num_of_queues; |
| |
| priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; |
| priv->hw_params.scd_bc_tbls_size = |
| priv->cfg->base_params->num_of_queues * |
| sizeof(struct iwlagn_scd_bc_tbl); |
| priv->hw_params.tfd_size = sizeof(struct iwl_tfd); |
| priv->hw_params.max_stations = IWLAGN_STATION_COUNT; |
| priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID; |
| |
| priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; |
| priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; |
| |
| priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) | |
| BIT(IEEE80211_BAND_5GHZ); |
| |
| priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); |
| if (priv->cfg->rx_with_siso_diversity) |
| priv->hw_params.rx_chains_num = 1; |
| else |
| priv->hw_params.rx_chains_num = |
| num_of_ant(priv->cfg->valid_rx_ant); |
| priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; |
| priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; |
| |
| iwl6000_set_ct_threshold(priv); |
| |
| /* Set initial sensitivity parameters */ |
| /* Set initial calibration set */ |
| priv->hw_params.sens = &iwl6000_sensitivity; |
| priv->hw_params.calib_init_cfg = |
| BIT(IWL_CALIB_XTAL) | |
| BIT(IWL_CALIB_LO) | |
| BIT(IWL_CALIB_TX_IQ) | |
| BIT(IWL_CALIB_BASE_BAND); |
| if (priv->cfg->need_dc_calib) |
| priv->hw_params.calib_rt_cfg |= BIT(IWL_CALIB_CFG_DC_IDX); |
| if (priv->cfg->need_temp_offset_calib) |
| priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET); |
| |
| priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS; |
| |
| return 0; |
| } |
| |
| static int iwl6000_hw_channel_switch(struct iwl_priv *priv, |
| struct ieee80211_channel_switch *ch_switch) |
| { |
| /* |
| * MULTI-FIXME |
| * See iwl_mac_channel_switch. |
| */ |
| struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; |
| struct iwl6000_channel_switch_cmd cmd; |
| const struct iwl_channel_info *ch_info; |
| u32 switch_time_in_usec, ucode_switch_time; |
| u16 ch; |
| u32 tsf_low; |
| u8 switch_count; |
| u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); |
| struct ieee80211_vif *vif = ctx->vif; |
| struct iwl_host_cmd hcmd = { |
| .id = REPLY_CHANNEL_SWITCH, |
| .len = { sizeof(cmd), }, |
| .flags = CMD_SYNC, |
| .data = { &cmd, }, |
| }; |
| |
| cmd.band = priv->band == IEEE80211_BAND_2GHZ; |
| ch = ch_switch->channel->hw_value; |
| IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", |
| ctx->active.channel, ch); |
| cmd.channel = cpu_to_le16(ch); |
| cmd.rxon_flags = ctx->staging.flags; |
| cmd.rxon_filter_flags = ctx->staging.filter_flags; |
| switch_count = ch_switch->count; |
| tsf_low = ch_switch->timestamp & 0x0ffffffff; |
| /* |
| * calculate the ucode channel switch time |
| * adding TSF as one of the factor for when to switch |
| */ |
| if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { |
| if (switch_count > ((priv->ucode_beacon_time - tsf_low) / |
| beacon_interval)) { |
| switch_count -= (priv->ucode_beacon_time - |
| tsf_low) / beacon_interval; |
| } else |
| switch_count = 0; |
| } |
| if (switch_count <= 1) |
| cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); |
| else { |
| switch_time_in_usec = |
| vif->bss_conf.beacon_int * switch_count * TIME_UNIT; |
| ucode_switch_time = iwl_usecs_to_beacons(priv, |
| switch_time_in_usec, |
| beacon_interval); |
| cmd.switch_time = iwl_add_beacon_time(priv, |
| priv->ucode_beacon_time, |
| ucode_switch_time, |
| beacon_interval); |
| } |
| IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", |
| cmd.switch_time); |
| ch_info = iwl_get_channel_info(priv, priv->band, ch); |
| if (ch_info) |
| cmd.expect_beacon = is_channel_radar(ch_info); |
| else { |
| IWL_ERR(priv, "invalid channel switch from %u to %u\n", |
| ctx->active.channel, ch); |
| return -EFAULT; |
| } |
| |
| return trans_send_cmd(priv, &hcmd); |
| } |
| |
| static struct iwl_lib_ops iwl6000_lib = { |
| .set_hw_params = iwl6000_hw_set_hw_params, |
| .rx_handler_setup = iwlagn_rx_handler_setup, |
| .setup_deferred_work = iwlagn_setup_deferred_work, |
| .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, |
| .update_chain_flags = iwl_update_chain_flags, |
| .set_channel_switch = iwl6000_hw_channel_switch, |
| .apm_ops = { |
| .init = iwl_apm_init, |
| .config = iwl6000_nic_config, |
| }, |
| .eeprom_ops = { |
| .regulatory_bands = { |
| EEPROM_REG_BAND_1_CHANNELS, |
| EEPROM_REG_BAND_2_CHANNELS, |
| EEPROM_REG_BAND_3_CHANNELS, |
| EEPROM_REG_BAND_4_CHANNELS, |
| EEPROM_REG_BAND_5_CHANNELS, |
| EEPROM_6000_REG_BAND_24_HT40_CHANNELS, |
| EEPROM_REG_BAND_52_HT40_CHANNELS |
| }, |
| .query_addr = iwlagn_eeprom_query_addr, |
| .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, |
| }, |
| .temp_ops = { |
| .temperature = iwlagn_temperature, |
| }, |
| }; |
| |
| static struct iwl_lib_ops iwl6030_lib = { |
| .set_hw_params = iwl6000_hw_set_hw_params, |
| .rx_handler_setup = iwlagn_bt_rx_handler_setup, |
| .setup_deferred_work = iwlagn_bt_setup_deferred_work, |
| .cancel_deferred_work = iwlagn_bt_cancel_deferred_work, |
| .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, |
| .update_chain_flags = iwl_update_chain_flags, |
| .set_channel_switch = iwl6000_hw_channel_switch, |
| .apm_ops = { |
| .init = iwl_apm_init, |
| .config = iwl6000_nic_config, |
| }, |
| .eeprom_ops = { |
| .regulatory_bands = { |
| EEPROM_REG_BAND_1_CHANNELS, |
| EEPROM_REG_BAND_2_CHANNELS, |
| EEPROM_REG_BAND_3_CHANNELS, |
| EEPROM_REG_BAND_4_CHANNELS, |
| EEPROM_REG_BAND_5_CHANNELS, |
| EEPROM_6000_REG_BAND_24_HT40_CHANNELS, |
| EEPROM_REG_BAND_52_HT40_CHANNELS |
| }, |
| .query_addr = iwlagn_eeprom_query_addr, |
| .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, |
| }, |
| .temp_ops = { |
| .temperature = iwlagn_temperature, |
| }, |
| }; |
| |
| static struct iwl_nic_ops iwl6050_nic_ops = { |
| .additional_nic_config = &iwl6050_additional_nic_config, |
| }; |
| |
| static struct iwl_nic_ops iwl6150_nic_ops = { |
| .additional_nic_config = &iwl6150_additional_nic_config, |
| }; |
| |
| static const struct iwl_ops iwl6000_ops = { |
| .lib = &iwl6000_lib, |
| .utils = &iwlagn_hcmd_utils, |
| }; |
| |
| static const struct iwl_ops iwl6050_ops = { |
| .lib = &iwl6000_lib, |
| .utils = &iwlagn_hcmd_utils, |
| .nic = &iwl6050_nic_ops, |
| }; |
| |
| static const struct iwl_ops iwl6150_ops = { |
| .lib = &iwl6000_lib, |
| .utils = &iwlagn_hcmd_utils, |
| .nic = &iwl6150_nic_ops, |
| }; |
| |
| static const struct iwl_ops iwl6030_ops = { |
| .lib = &iwl6030_lib, |
| .utils = &iwlagn_hcmd_utils, |
| }; |
| |
| static struct iwl_base_params iwl6000_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE, |
| .num_of_queues = IWLAGN_NUM_QUEUES, |
| .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, |
| .pll_cfg_val = 0, |
| .max_ll_items = OTP_MAX_LL_ITEMS_6x00, |
| .shadow_ram_support = true, |
| .led_compensation = 51, |
| .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, |
| .adv_thermal_throttle = true, |
| .support_ct_kill_exit = true, |
| .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, |
| .chain_noise_scale = 1000, |
| .wd_timeout = IWL_DEF_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| }; |
| |
| static struct iwl_base_params iwl6050_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE, |
| .num_of_queues = IWLAGN_NUM_QUEUES, |
| .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, |
| .pll_cfg_val = 0, |
| .max_ll_items = OTP_MAX_LL_ITEMS_6x50, |
| .shadow_ram_support = true, |
| .led_compensation = 51, |
| .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, |
| .adv_thermal_throttle = true, |
| .support_ct_kill_exit = true, |
| .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, |
| .chain_noise_scale = 1500, |
| .wd_timeout = IWL_DEF_WD_TIMEOUT, |
| .max_event_log_size = 1024, |
| .shadow_reg_enable = true, |
| }; |
| static struct iwl_base_params iwl6000_g2_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE, |
| .num_of_queues = IWLAGN_NUM_QUEUES, |
| .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, |
| .pll_cfg_val = 0, |
| .max_ll_items = OTP_MAX_LL_ITEMS_6x00, |
| .shadow_ram_support = true, |
| .led_compensation = 57, |
| .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, |
| .adv_thermal_throttle = true, |
| .support_ct_kill_exit = true, |
| .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, |
| .chain_noise_scale = 1000, |
| .wd_timeout = IWL_LONG_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| }; |
| |
| static struct iwl_ht_params iwl6000_ht_params = { |
| .ht_greenfield_support = true, |
| .use_rts_for_aggregation = true, /* use rts/cts protection */ |
| }; |
| |
| static struct iwl_bt_params iwl6000_bt_params = { |
| /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ |
| .advanced_bt_coexist = true, |
| .agg_time_limit = BT_AGG_THRESHOLD_DEF, |
| .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, |
| .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, |
| .bt_sco_disable = true, |
| }; |
| |
| #define IWL_DEVICE_6005 \ |
| .fw_name_pre = IWL6005_FW_PRE, \ |
| .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ |
| .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ |
| .eeprom_ver = EEPROM_6005_EEPROM_VERSION, \ |
| .eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \ |
| .ops = &iwl6000_ops, \ |
| .base_params = &iwl6000_g2_base_params, \ |
| .need_dc_calib = true, \ |
| .need_temp_offset_calib = true, \ |
| .led_mode = IWL_LED_RF_STATE |
| |
| struct iwl_cfg iwl6005_2agn_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN", |
| IWL_DEVICE_6005, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6005_2abg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG", |
| IWL_DEVICE_6005, |
| }; |
| |
| struct iwl_cfg iwl6005_2bg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6205 BG", |
| IWL_DEVICE_6005, |
| }; |
| |
| #define IWL_DEVICE_6030 \ |
| .fw_name_pre = IWL6030_FW_PRE, \ |
| .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ |
| .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ |
| .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \ |
| .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ |
| .ops = &iwl6030_ops, \ |
| .base_params = &iwl6000_g2_base_params, \ |
| .bt_params = &iwl6000_bt_params, \ |
| .need_dc_calib = true, \ |
| .need_temp_offset_calib = true, \ |
| .led_mode = IWL_LED_RF_STATE, \ |
| .adv_pm = true \ |
| |
| struct iwl_cfg iwl6030_2agn_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN", |
| IWL_DEVICE_6030, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6030_2abg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG", |
| IWL_DEVICE_6030, |
| }; |
| |
| struct iwl_cfg iwl6030_2bgn_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN", |
| IWL_DEVICE_6030, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6030_2bg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6230 BG", |
| IWL_DEVICE_6030, |
| }; |
| |
| struct iwl_cfg iwl6035_2agn_cfg = { |
| .name = "6035 Series 2x2 AGN/BT", |
| IWL_DEVICE_6030, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6035_2abg_cfg = { |
| .name = "6035 Series 2x2 ABG/BT", |
| IWL_DEVICE_6030, |
| }; |
| |
| struct iwl_cfg iwl6035_2bg_cfg = { |
| .name = "6035 Series 2x2 BG/BT", |
| IWL_DEVICE_6030, |
| }; |
| |
| struct iwl_cfg iwl1030_bgn_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", |
| IWL_DEVICE_6030, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl1030_bg_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N 1030 BG", |
| IWL_DEVICE_6030, |
| }; |
| |
| struct iwl_cfg iwl130_bgn_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N 130 BGN", |
| IWL_DEVICE_6030, |
| .ht_params = &iwl6000_ht_params, |
| .rx_with_siso_diversity = true, |
| }; |
| |
| struct iwl_cfg iwl130_bg_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N 130 BG", |
| IWL_DEVICE_6030, |
| .rx_with_siso_diversity = true, |
| }; |
| |
| /* |
| * "i": Internal configuration, use internal Power Amplifier |
| */ |
| #define IWL_DEVICE_6000i \ |
| .fw_name_pre = IWL6000_FW_PRE, \ |
| .ucode_api_max = IWL6000_UCODE_API_MAX, \ |
| .ucode_api_min = IWL6000_UCODE_API_MIN, \ |
| .valid_tx_ant = ANT_BC, /* .cfg overwrite */ \ |
| .valid_rx_ant = ANT_BC, /* .cfg overwrite */ \ |
| .eeprom_ver = EEPROM_6000_EEPROM_VERSION, \ |
| .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \ |
| .ops = &iwl6000_ops, \ |
| .base_params = &iwl6000_base_params, \ |
| .pa_type = IWL_PA_INTERNAL, \ |
| .led_mode = IWL_LED_BLINK |
| |
| struct iwl_cfg iwl6000i_2agn_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", |
| IWL_DEVICE_6000i, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6000i_2abg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", |
| IWL_DEVICE_6000i, |
| }; |
| |
| struct iwl_cfg iwl6000i_2bg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", |
| IWL_DEVICE_6000i, |
| }; |
| |
| #define IWL_DEVICE_6050 \ |
| .fw_name_pre = IWL6050_FW_PRE, \ |
| .ucode_api_max = IWL6050_UCODE_API_MAX, \ |
| .ucode_api_min = IWL6050_UCODE_API_MIN, \ |
| .valid_tx_ant = ANT_AB, /* .cfg overwrite */ \ |
| .valid_rx_ant = ANT_AB, /* .cfg overwrite */ \ |
| .ops = &iwl6050_ops, \ |
| .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ |
| .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ |
| .base_params = &iwl6050_base_params, \ |
| .need_dc_calib = true, \ |
| .led_mode = IWL_LED_BLINK, \ |
| .internal_wimax_coex = true |
| |
| struct iwl_cfg iwl6050_2agn_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", |
| IWL_DEVICE_6050, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6050_2abg_cfg = { |
| .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", |
| IWL_DEVICE_6050, |
| }; |
| |
| #define IWL_DEVICE_6150 \ |
| .fw_name_pre = IWL6050_FW_PRE, \ |
| .ucode_api_max = IWL6050_UCODE_API_MAX, \ |
| .ucode_api_min = IWL6050_UCODE_API_MIN, \ |
| .ops = &iwl6150_ops, \ |
| .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ |
| .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ |
| .base_params = &iwl6050_base_params, \ |
| .need_dc_calib = true, \ |
| .led_mode = IWL_LED_BLINK, \ |
| .internal_wimax_coex = true |
| |
| struct iwl_cfg iwl6150_bgn_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", |
| IWL_DEVICE_6150, |
| .ht_params = &iwl6000_ht_params, |
| }; |
| |
| struct iwl_cfg iwl6150_bg_cfg = { |
| .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", |
| IWL_DEVICE_6150, |
| }; |
| |
| struct iwl_cfg iwl6000_3agn_cfg = { |
| .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN", |
| .fw_name_pre = IWL6000_FW_PRE, |
| .ucode_api_max = IWL6000_UCODE_API_MAX, |
| .ucode_api_min = IWL6000_UCODE_API_MIN, |
| .eeprom_ver = EEPROM_6000_EEPROM_VERSION, |
| .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, |
| .ops = &iwl6000_ops, |
| .base_params = &iwl6000_base_params, |
| .ht_params = &iwl6000_ht_params, |
| .need_dc_calib = true, |
| .led_mode = IWL_LED_BLINK, |
| }; |
| |
| MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); |