iio: light: Add support for Sensortek STK3310
Minimal implementation of an IIO driver for the Sensortek
STK3310 ambient light and proximity sensor. The STK3311
model is also supported.
Includes:
- ACPI support;
- read_raw and write_raw;
- reading and setting configuration parameters for gain/scale
and integration time for both ALS and PS.
- power management
Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index a437bad..3d7bafa 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -175,6 +175,17 @@
This driver can also be built as a module. If so, the module
will be called ltr501.
+config STK3310
+ tristate "STK3310 ALS and proximity sensor"
+ depends on I2C
+ help
+ Say yes here to get support for the Sensortek STK3310 ambient light
+ and proximity sensor. The STK3311 model is also supported by this
+ driver.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk3310.
+
config TCS3414
tristate "TAOS TCS3414 digital color sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index ad7c30f..90e7fd2 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
obj-$(CONFIG_LTR501) += ltr501.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
+obj-$(CONFIG_STK3310) += stk3310.o
obj-$(CONFIG_TCS3414) += tcs3414.o
obj-$(CONFIG_TCS3472) += tcs3472.o
obj-$(CONFIG_TSL4531) += tsl4531.o
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
new file mode 100644
index 0000000..0f8c450
--- /dev/null
+++ b/drivers/iio/light/stk3310.c
@@ -0,0 +1,471 @@
+/**
+ * Sensortek STK3310/STK3311 Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for STK3310/STK3311. 7-bit I2C address: 0x48.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define STK3310_REG_STATE 0x00
+#define STK3310_REG_PSCTRL 0x01
+#define STK3310_REG_ALSCTRL 0x02
+#define STK3310_REG_PS_DATA_MSB 0x11
+#define STK3310_REG_PS_DATA_LSB 0x12
+#define STK3310_REG_ALS_DATA_MSB 0x13
+#define STK3310_REG_ALS_DATA_LSB 0x14
+#define STK3310_REG_ID 0x3E
+#define STK3310_MAX_REG 0x80
+
+#define STK3310_STATE_EN_PS 0x01
+#define STK3310_STATE_EN_ALS 0x02
+#define STK3310_STATE_STANDBY 0x00
+
+#define STK3310_CHIP_ID_VAL 0x13
+#define STK3311_CHIP_ID_VAL 0x1D
+#define STK3310_PS_MAX_VAL 0xFFFF
+
+#define STK3310_DRIVER_NAME "stk3310"
+#define STK3310_REGMAP_NAME "stk3310_regmap"
+
+#define STK3310_SCALE_AVAILABLE "6.4 1.6 0.4 0.1"
+
+#define STK3310_IT_AVAILABLE \
+ "0.000185 0.000370 0.000741 0.001480 0.002960 0.005920 0.011840 " \
+ "0.023680 0.047360 0.094720 0.189440 0.378880 0.757760 1.515520 " \
+ "3.031040 6.062080"
+
+#define STK3310_REGFIELD(name) \
+ do { \
+ data->reg_##name = \
+ devm_regmap_field_alloc(&client->dev, regmap, \
+ stk3310_reg_field_##name); \
+ if (IS_ERR(data->reg_##name)) { \
+ dev_err(&client->dev, "reg field alloc failed.\n"); \
+ return PTR_ERR(data->reg_##name); \
+ } \
+ } while (0)
+
+static const struct reg_field stk3310_reg_field_state =
+ REG_FIELD(STK3310_REG_STATE, 0, 2);
+static const struct reg_field stk3310_reg_field_als_gain =
+ REG_FIELD(STK3310_REG_ALSCTRL, 4, 5);
+static const struct reg_field stk3310_reg_field_ps_gain =
+ REG_FIELD(STK3310_REG_PSCTRL, 4, 5);
+static const struct reg_field stk3310_reg_field_als_it =
+ REG_FIELD(STK3310_REG_ALSCTRL, 0, 3);
+static const struct reg_field stk3310_reg_field_ps_it =
+ REG_FIELD(STK3310_REG_PSCTRL, 0, 3);
+
+/*
+ * Maximum PS values with regard to scale. Used to export the 'inverse'
+ * PS value (high values for far objects, low values for near objects).
+ */
+static const int stk3310_ps_max[4] = {
+ STK3310_PS_MAX_VAL / 64,
+ STK3310_PS_MAX_VAL / 16,
+ STK3310_PS_MAX_VAL / 4,
+ STK3310_PS_MAX_VAL,
+};
+
+static const int stk3310_scale_table[][2] = {
+ {6, 400000}, {1, 600000}, {0, 400000}, {0, 100000}
+};
+
+/* Integration time in seconds, microseconds */
+static const int stk3310_it_table[][2] = {
+ {0, 185}, {0, 370}, {0, 741}, {0, 1480},
+ {0, 2960}, {0, 5920}, {0, 11840}, {0, 23680},
+ {0, 47360}, {0, 94720}, {0, 189440}, {0, 378880},
+ {0, 757760}, {1, 515520}, {3, 31040}, {6, 62080},
+};
+
+struct stk3310_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ bool als_enabled;
+ bool ps_enabled;
+ struct regmap *regmap;
+ struct regmap_field *reg_state;
+ struct regmap_field *reg_als_gain;
+ struct regmap_field *reg_ps_gain;
+ struct regmap_field *reg_als_it;
+ struct regmap_field *reg_ps_it;
+};
+
+static const struct iio_chan_spec stk3310_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ },
+ {
+ .type = IIO_PROXIMITY,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ }
+};
+
+static IIO_CONST_ATTR(in_illuminance_scale_available, STK3310_SCALE_AVAILABLE);
+
+static IIO_CONST_ATTR(in_proximity_scale_available, STK3310_SCALE_AVAILABLE);
+
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+ STK3310_IT_AVAILABLE);
+
+static IIO_CONST_ATTR(in_proximity_integration_time_available,
+ STK3310_IT_AVAILABLE);
+
+static struct attribute *stk3310_attributes[] = {
+ &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
+ &iio_const_attr_in_proximity_scale_available.dev_attr.attr,
+ &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+ &iio_const_attr_in_proximity_integration_time_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group stk3310_attribute_group = {
+ .attrs = stk3310_attributes
+};
+
+static int stk3310_get_index(const int table[][2], int table_size,
+ int val, int val2)
+{
+ int i;
+
+ for (i = 0; i < table_size; i++) {
+ if (val == table[i][0] && val2 == table[i][1])
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int stk3310_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ u8 reg;
+ u16 buf;
+ int ret;
+ unsigned int index;
+ struct stk3310_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (chan->type == IIO_LIGHT)
+ reg = STK3310_REG_ALS_DATA_MSB;
+ else if (chan->type == IIO_PROXIMITY)
+ reg = STK3310_REG_PS_DATA_MSB;
+ else
+ return -EINVAL;
+ mutex_lock(&data->lock);
+ ret = regmap_bulk_read(data->regmap, reg, &buf, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "register read failed\n");
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+ *val = swab16(buf);
+ if (chan->type == IIO_PROXIMITY) {
+ /*
+ * Invert the proximity data so we return low values
+ * for close objects and high values for far ones.
+ */
+ regmap_field_read(data->reg_ps_gain, &index);
+ *val = stk3310_ps_max[index] - *val;
+ }
+ mutex_unlock(&data->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->type == IIO_LIGHT)
+ regmap_field_read(data->reg_als_it, &index);
+ else
+ regmap_field_read(data->reg_ps_it, &index);
+ *val = stk3310_it_table[index][0];
+ *val2 = stk3310_it_table[index][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_LIGHT)
+ regmap_field_read(data->reg_als_gain, &index);
+ else
+ regmap_field_read(data->reg_ps_gain, &index);
+ *val = stk3310_scale_table[index][0];
+ *val2 = stk3310_scale_table[index][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+static int stk3310_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret;
+ unsigned int index;
+ struct stk3310_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ index = stk3310_get_index(stk3310_it_table,
+ ARRAY_SIZE(stk3310_it_table),
+ val, val2);
+ if (index < 0)
+ return -EINVAL;
+ mutex_lock(&data->lock);
+ if (chan->type == IIO_LIGHT)
+ ret = regmap_field_write(data->reg_als_it, index);
+ else
+ ret = regmap_field_write(data->reg_ps_it, index);
+ if (ret < 0)
+ dev_err(&data->client->dev,
+ "sensor configuration failed\n");
+ mutex_unlock(&data->lock);
+ return ret;
+
+ case IIO_CHAN_INFO_SCALE:
+ index = stk3310_get_index(stk3310_scale_table,
+ ARRAY_SIZE(stk3310_scale_table),
+ val, val2);
+ if (index < 0)
+ return -EINVAL;
+ mutex_lock(&data->lock);
+ if (chan->type == IIO_LIGHT)
+ ret = regmap_field_write(data->reg_als_gain, index);
+ else
+ ret = regmap_field_write(data->reg_ps_gain, index);
+ if (ret < 0)
+ dev_err(&data->client->dev,
+ "sensor configuration failed\n");
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info stk3310_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = stk3310_read_raw,
+ .write_raw = stk3310_write_raw,
+ .attrs = &stk3310_attribute_group,
+};
+
+static int stk3310_set_state(struct stk3310_data *data, u8 state)
+{
+ int ret;
+ struct i2c_client *client = data->client;
+
+ /* 3-bit state; 0b100 is not supported. */
+ if (state > 7 || state == 4)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ ret = regmap_field_write(data->reg_state, state);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to change sensor state\n");
+ } else if (state != STK3310_STATE_STANDBY) {
+ /* Don't reset the 'enabled' flags if we're going in standby */
+ data->ps_enabled = !!(state & 0x01);
+ data->als_enabled = !!(state & 0x02);
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int stk3310_init(struct iio_dev *indio_dev)
+{
+ int ret;
+ int chipid;
+ u8 state;
+ struct stk3310_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+
+ regmap_read(data->regmap, STK3310_REG_ID, &chipid);
+ if (chipid != STK3310_CHIP_ID_VAL &&
+ chipid != STK3311_CHIP_ID_VAL) {
+ dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid);
+ return -ENODEV;
+ }
+
+ state = STK3310_STATE_EN_ALS | STK3310_STATE_EN_PS;
+ ret = stk3310_set_state(data, state);
+ if (ret < 0)
+ dev_err(&client->dev, "failed to enable sensor");
+
+ return ret;
+}
+
+static bool stk3310_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case STK3310_REG_ALS_DATA_MSB:
+ case STK3310_REG_ALS_DATA_LSB:
+ case STK3310_REG_PS_DATA_LSB:
+ case STK3310_REG_PS_DATA_MSB:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static struct regmap_config stk3310_regmap_config = {
+ .name = STK3310_REGMAP_NAME,
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = STK3310_MAX_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = stk3310_is_volatile_reg,
+};
+
+static int stk3310_regmap_init(struct stk3310_data *data)
+{
+ struct regmap *regmap;
+ struct i2c_client *client;
+
+ client = data->client;
+ regmap = devm_regmap_init_i2c(client, &stk3310_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "regmap initialization failed.\n");
+ return PTR_ERR(regmap);
+ }
+ data->regmap = regmap;
+
+ STK3310_REGFIELD(state);
+ STK3310_REGFIELD(als_gain);
+ STK3310_REGFIELD(ps_gain);
+ STK3310_REGFIELD(als_it);
+ STK3310_REGFIELD(ps_it);
+
+ return 0;
+}
+
+static int stk3310_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct stk3310_data *data;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation failed!\n");
+ return -ENOMEM;
+ }
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+ mutex_init(&data->lock);
+
+ ret = stk3310_regmap_init(data);
+ if (ret < 0)
+ return ret;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &stk3310_info;
+ indio_dev->name = STK3310_DRIVER_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = stk3310_channels;
+ indio_dev->num_channels = ARRAY_SIZE(stk3310_channels);
+
+ ret = stk3310_init(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ stk3310_set_state(data, STK3310_STATE_STANDBY);
+ }
+
+ return ret;
+}
+
+static int stk3310_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ return stk3310_set_state(iio_priv(indio_dev), STK3310_STATE_STANDBY);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stk3310_suspend(struct device *dev)
+{
+ struct stk3310_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return stk3310_set_state(data, STK3310_STATE_STANDBY);
+}
+
+static int stk3310_resume(struct device *dev)
+{
+ int state = 0;
+ struct stk3310_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+ if (data->ps_enabled)
+ state |= STK3310_STATE_EN_PS;
+ if (data->als_enabled)
+ state |= STK3310_STATE_EN_ALS;
+
+ return stk3310_set_state(data, state);
+}
+
+static SIMPLE_DEV_PM_OPS(stk3310_pm_ops, stk3310_suspend, stk3310_resume);
+
+#define STK3310_PM_OPS (&stk3310_pm_ops)
+#else
+#define STK3310_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id stk3310_i2c_id[] = {
+ {"STK3310", 0},
+ {"STK3311", 0},
+ {}
+};
+
+static const struct acpi_device_id stk3310_acpi_id[] = {
+ {"STK3310", 0},
+ {"STK3311", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, stk3310_acpi_id);
+
+static struct i2c_driver stk3310_driver = {
+ .driver = {
+ .name = "stk3310",
+ .pm = STK3310_PM_OPS,
+ .acpi_match_table = ACPI_PTR(stk3310_acpi_id),
+ },
+ .probe = stk3310_probe,
+ .remove = stk3310_remove,
+ .id_table = stk3310_i2c_id,
+};
+
+module_i2c_driver(stk3310_driver);
+
+MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
+MODULE_DESCRIPTION("STK3310 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");