clocksource: convert ARM 32-bit down counting clocksources
Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources
to generic mmio clocksource infrastructure.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9aa5514..0a05a57 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1042,6 +1042,7 @@
config PLAT_ORION
bool
+ select CLKSRC_MMIO
select HAVE_SCHED_CLOCK
config PLAT_PXA
@@ -1052,6 +1053,7 @@
config ARM_TIMER_SP804
bool
+ select CLKSRC_MMIO
source arch/arm/mm/Kconfig
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 6ef33421..445b05e 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -32,35 +32,17 @@
#define TIMER_FREQ_KHZ (1000)
#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ)
-static void __iomem *clksrc_base;
-
-static cycle_t sp804_read(struct clocksource *cs)
-{
- return ~readl(clksrc_base + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_sp804 = {
- .name = "timer3",
- .rating = 200,
- .read = sp804_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
void __init sp804_clocksource_init(void __iomem *base)
{
- struct clocksource *cs = &clocksource_sp804;
-
- clksrc_base = base;
-
/* setup timer 0 as free-running clocksource */
- writel(0, clksrc_base + TIMER_CTRL);
- writel(0xffffffff, clksrc_base + TIMER_LOAD);
- writel(0xffffffff, clksrc_base + TIMER_VALUE);
+ writel(0, base + TIMER_CTRL);
+ writel(0xffffffff, base + TIMER_LOAD);
+ writel(0xffffffff, base + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- clksrc_base + TIMER_CTRL);
+ base + TIMER_CTRL);
- clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+ clocksource_mmio_init(base + TIMER_VALUE, "timer3",
+ TIMER_FREQ_KHZ * 1000, 200, 32, clocksource_mmio_readl_down);
}
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d69d343..d3467f8 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -83,26 +83,12 @@
__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
}
-static cycle_t epit_read(struct clocksource *cs)
-{
- return 0 - __raw_readl(timer_base + EPITCNR);
-}
-
-static struct clocksource clocksource_epit = {
- .name = "epit",
- .rating = 200,
- .read = epit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static int __init epit_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- clocksource_register_hz(&clocksource_epit, c);
-
- return 0;
+ return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+ clocksource_mmio_readl_down);
}
/* clock event */
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 187f4e8..18296ee 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,6 +5,7 @@
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
+ select CLKSRC_MMIO
default y
help
Common platform code for Nomadik and other ST-Ericsson
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 4172340..ef74e157 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -26,29 +26,6 @@
void __iomem *mtu_base; /* Assigned by machine code */
/*
- * Kernel assumes that sched_clock can be called early
- * but the MTU may not yet be initialized.
- */
-static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
-{
- return 0;
-}
-
-/* clocksource: MTU decrements, so we negate the value being read. */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
- return -readl(mtu_base + MTU_VAL(0));
-}
-
-static struct clocksource nmdk_clksrc = {
- .name = "mtu_0",
- .rating = 200,
- .read = nmdk_read_timer_dummy,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
@@ -172,12 +149,10 @@
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- /* Now the clock source is ready */
- nmdk_clksrc.read = nmdk_read_timer;
-
- if (clocksource_register_hz(&nmdk_clksrc, rate))
+ if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+ rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
- nmdk_clksrc.name);
+ "mtu_0");
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 742b032..69a6136 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -81,24 +81,6 @@
}
/*
- * Clocksource handling.
- */
-static cycle_t orion_clksrc_read(struct clocksource *cs)
-{
- return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
-}
-
-static struct clocksource orion_clksrc = {
- .name = "orion_clocksource",
- .rating = 300,
- .read = orion_clksrc_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-
-/*
* Clockevent handling.
*/
static int
@@ -247,7 +229,8 @@
writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
- clocksource_register_hz(&orion_clksrc, tclk);
+ clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
+ tclk, 300, 32, clocksource_mmio_readl_down);
/*
* Setup clockevent timer (interrupt-driven).