V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g
This patch adds support for the Geniatech Digistar, aka
Digiwave 103g DVB-S card.
Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Saqeb Akhter <johoja@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index f9d68f2..14bd486 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1194,6 +1194,21 @@
}},
.dvb = 1,
},
+ [CX88_BOARD_GENIATECH_DVBS] = {
+ .name = "Geniatech DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ }},
+ .dvb = 1,
+ },
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
@@ -1439,6 +1454,10 @@
.subvendor = 0x18ac,
.subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */
.card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+ },{
+ .subvendor = 0x14f1,
+ .subdevice = 0x0084,
+ .card = CX88_BOARD_GENIATECH_DVBS,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index dce1fed..afde378 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -496,6 +496,26 @@
return 0;
}
+static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct cx8802_dev *dev= fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ if (voltage == SEC_VOLTAGE_OFF) {
+ dprintk(1,"LNB Voltage OFF\n");
+ cx_write(MO_GP0_IO, 0x0000efff);
+ }
+
+ if (core->prev_set_voltage)
+ return core->prev_set_voltage(fe, voltage);
+ return 0;
+}
+
+static struct cx24123_config geniatech_dvbs_config = {
+ .demod_address = 0x55,
+ .set_ts_params = cx24123_set_ts_param,
+};
+
static struct cx24123_config hauppauge_novas_config = {
.demod_address = 0x55,
.set_ts_params = cx24123_set_ts_param,
@@ -760,6 +780,14 @@
dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
+ case CX88_BOARD_GENIATECH_DVBS:
+ dev->dvb.frontend = cx24123_attach(&geniatech_dvbs_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
+ dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
+ }
+ break;
#endif
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 336e823..e781095 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -196,6 +196,7 @@
#define CX88_BOARD_PIXELVIEW_PLAYTV_P7000 49
#define CX88_BOARD_NPGTECH_REALTV_TOP10FM 50
#define CX88_BOARD_WINFAST_DTV2000H 51
+#define CX88_BOARD_GENIATECH_DVBS 52
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,