| /* |
| * CHRP pci routines. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/ide.h> |
| |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/hydra.h> |
| #include <asm/prom.h> |
| #include <asm/gg2.h> |
| #include <asm/machdep.h> |
| #include <asm/sections.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/open_pic.h> |
| |
| /* LongTrail */ |
| void __iomem *gg2_pci_config_base; |
| |
| /* |
| * The VLSI Golden Gate II has only 512K of PCI configuration space, so we |
| * limit the bus number to 3 bits |
| */ |
| |
| int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, |
| int len, u32 *val) |
| { |
| volatile void __iomem *cfg_data; |
| struct pci_controller *hose = bus->sysdata; |
| |
| if (bus->number > 7) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that off is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); |
| switch (len) { |
| case 1: |
| *val = in_8(cfg_data); |
| break; |
| case 2: |
| *val = in_le16(cfg_data); |
| break; |
| default: |
| *val = in_le32(cfg_data); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, |
| int len, u32 val) |
| { |
| volatile void __iomem *cfg_data; |
| struct pci_controller *hose = bus->sysdata; |
| |
| if (bus->number > 7) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that off is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); |
| switch (len) { |
| case 1: |
| out_8(cfg_data, val); |
| break; |
| case 2: |
| out_le16(cfg_data, val); |
| break; |
| default: |
| out_le32(cfg_data, val); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops gg2_pci_ops = |
| { |
| gg2_read_config, |
| gg2_write_config |
| }; |
| |
| /* |
| * Access functions for PCI config space using RTAS calls. |
| */ |
| int |
| rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 *val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) |
| | (((bus->number - hose->first_busno) & 0xff) << 16) |
| | (hose->index << 24); |
| unsigned long ret = ~0UL; |
| int rval; |
| |
| rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len); |
| *val = ret; |
| return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; |
| } |
| |
| int |
| rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) |
| | (((bus->number - hose->first_busno) & 0xff) << 16) |
| | (hose->index << 24); |
| int rval; |
| |
| rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val); |
| return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops rtas_pci_ops = |
| { |
| rtas_read_config, |
| rtas_write_config |
| }; |
| |
| volatile struct Hydra __iomem *Hydra = NULL; |
| |
| int __init |
| hydra_init(void) |
| { |
| struct device_node *np; |
| |
| np = find_devices("mac-io"); |
| if (np == NULL || np->n_addrs == 0) |
| return 0; |
| Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); |
| printk("Hydra Mac I/O at %x\n", np->addrs[0].address); |
| printk("Hydra Feature_Control was %x", |
| in_le32(&Hydra->Feature_Control)); |
| out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | |
| HYDRA_FC_SCSI_CELL_EN | |
| HYDRA_FC_SCCA_ENABLE | |
| HYDRA_FC_SCCB_ENABLE | |
| HYDRA_FC_ARB_BYPASS | |
| HYDRA_FC_MPIC_ENABLE | |
| HYDRA_FC_SLOW_SCC_PCLK | |
| HYDRA_FC_MPIC_IS_MASTER)); |
| printk(", now %x\n", in_le32(&Hydra->Feature_Control)); |
| return 1; |
| } |
| |
| void __init |
| chrp_pcibios_fixup(void) |
| { |
| struct pci_dev *dev = NULL; |
| struct device_node *np; |
| |
| /* PCI interrupts are controlled by the OpenPIC */ |
| for_each_pci_dev(dev) { |
| np = pci_device_to_OF_node(dev); |
| if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) |
| dev->irq = np->intrs[0].line; |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); |
| } |
| } |
| |
| #define PRG_CL_RESET_VALID 0x00010000 |
| |
| static void __init |
| setup_python(struct pci_controller *hose, struct device_node *dev) |
| { |
| u32 __iomem *reg; |
| u32 val; |
| unsigned long addr = dev->addrs[0].address; |
| |
| setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); |
| |
| /* Clear the magic go-slow bit */ |
| reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); |
| val = in_be32(®[12]); |
| if (val & PRG_CL_RESET_VALID) { |
| out_be32(®[12], val & ~PRG_CL_RESET_VALID); |
| in_be32(®[12]); |
| } |
| iounmap(reg); |
| } |
| |
| /* Marvell Discovery II based Pegasos 2 */ |
| static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) |
| { |
| struct device_node *root = find_path_device("/"); |
| struct device_node *rtas; |
| |
| rtas = of_find_node_by_name (root, "rtas"); |
| if (rtas) { |
| hose->ops = &rtas_pci_ops; |
| } else { |
| printk ("RTAS supporting Pegasos OF not found, please upgrade" |
| " your firmware\n"); |
| } |
| pci_assign_all_buses = 1; |
| } |
| |
| void __init |
| chrp_find_bridges(void) |
| { |
| struct device_node *dev; |
| int *bus_range; |
| int len, index = -1; |
| struct pci_controller *hose; |
| unsigned int *dma; |
| char *model, *machine; |
| int is_longtrail = 0, is_mot = 0, is_pegasos = 0; |
| struct device_node *root = find_path_device("/"); |
| |
| /* |
| * The PCI host bridge nodes on some machines don't have |
| * properties to adequately identify them, so we have to |
| * look at what sort of machine this is as well. |
| */ |
| machine = get_property(root, "model", NULL); |
| if (machine != NULL) { |
| is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; |
| is_mot = strncmp(machine, "MOT", 3) == 0; |
| if (strncmp(machine, "Pegasos2", 8) == 0) |
| is_pegasos = 2; |
| else if (strncmp(machine, "Pegasos", 7) == 0) |
| is_pegasos = 1; |
| } |
| for (dev = root->child; dev != NULL; dev = dev->sibling) { |
| if (dev->type == NULL || strcmp(dev->type, "pci") != 0) |
| continue; |
| ++index; |
| /* The GG2 bridge on the LongTrail doesn't have an address */ |
| if (dev->n_addrs < 1 && !is_longtrail) { |
| printk(KERN_WARNING "Can't use %s: no address\n", |
| dev->full_name); |
| continue; |
| } |
| bus_range = (int *) get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %s\n", |
| dev->full_name); |
| continue; |
| } |
| if (bus_range[1] == bus_range[0]) |
| printk(KERN_INFO "PCI bus %d", bus_range[0]); |
| else |
| printk(KERN_INFO "PCI buses %d..%d", |
| bus_range[0], bus_range[1]); |
| printk(" controlled by %s", dev->type); |
| if (dev->n_addrs > 0) |
| printk(" at %x", dev->addrs[0].address); |
| printk("\n"); |
| |
| hose = pcibios_alloc_controller(); |
| if (!hose) { |
| printk("Can't allocate PCI controller structure for %s\n", |
| dev->full_name); |
| continue; |
| } |
| hose->arch_data = dev; |
| hose->first_busno = bus_range[0]; |
| hose->last_busno = bus_range[1]; |
| |
| model = get_property(dev, "model", NULL); |
| if (model == NULL) |
| model = "<none>"; |
| if (device_is_compatible(dev, "IBM,python")) { |
| setup_python(hose, dev); |
| } else if (is_mot |
| || strncmp(model, "Motorola, Grackle", 17) == 0) { |
| setup_grackle(hose); |
| } else if (is_longtrail) { |
| void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); |
| hose->ops = &gg2_pci_ops; |
| hose->cfg_data = p; |
| gg2_pci_config_base = p; |
| } else if (is_pegasos == 1) { |
| setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); |
| } else if (is_pegasos == 2) { |
| setup_peg2(hose, dev); |
| } else { |
| printk("No methods for %s (model %s), using RTAS\n", |
| dev->full_name, model); |
| hose->ops = &rtas_pci_ops; |
| } |
| |
| pci_process_bridge_OF_ranges(hose, dev, index == 0); |
| |
| /* check the first bridge for a property that we can |
| use to set pci_dram_offset */ |
| dma = (unsigned int *) |
| get_property(dev, "ibm,dma-ranges", &len); |
| if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { |
| pci_dram_offset = dma[2] - dma[3]; |
| printk("pci_dram_offset = %lx\n", pci_dram_offset); |
| } |
| } |
| |
| /* Do not fixup interrupts from OF tree on pegasos */ |
| if (is_pegasos == 0) |
| ppc_md.pcibios_fixup = chrp_pcibios_fixup; |
| } |