ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
Link the ARM GIC to the INTC-SYS module clock and the C4 power domain,
so it can be power managed using that clock in the future.
Note that currently the GIC-400 driver doesn't support module clocks nor
Runtime PM, so this must be handled as a critical clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 6fb7eab..1f5c9f6 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -467,6 +467,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A73A4_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&pd_c4>;
};
bsc: bus@fec10000 {
@@ -725,16 +728,18 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&main_div2_clk>, <&main_div2_clk>,
+ clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+ <&main_div2_clk>,
<&cpg_clocks R8A73A4_CLK_HP>,
<&cpg_clocks R8A73A4_CLK_HP>;
#clock-cells = <1>;
clock-indices = <
- R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5
- R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3
+ R8A73A4_CLK_IRQC R8A73A4_CLK_INTC_SYS
+ R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
+ R8A73A4_CLK_IIC3
>;
clock-output-names =
- "irqc", "iic5", "iic4", "iic3";
+ "irqc", "intc-sys", "iic5", "iic4", "iic3";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";