| /* |
| * Embedded Artist LPC4357 Developer's Kit |
| * |
| * Copyright 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This code is released using a dual license strategy: BSD/GPL |
| * You can choose the licence that better fits your requirements. |
| * |
| * Released under the terms of 3-clause BSD License |
| * Released under the terms of GNU General Public License Version 2.0 |
| * |
| */ |
| /dts-v1/; |
| |
| #include "lpc18xx.dtsi" |
| #include "lpc4357.dtsi" |
| |
| #include "dt-bindings/input/input.h" |
| #include "dt-bindings/gpio/gpio.h" |
| |
| / { |
| model = "Embedded Artists' LPC4357 Developer's Kit"; |
| compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| }; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x28000000 0x2000000>; /* 32 MB */ |
| }; |
| |
| /* vmmc is controlled by sdmmc host internally */ |
| vmmc: vmmc_fixed { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmc-supply"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| gpio_joystick { |
| compatible = "gpio-keys-polled"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_joystick_pins>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <100>; |
| autorepeat; |
| |
| button@0 { |
| label = "joy_enter"; |
| linux,code = <KEY_ENTER>; |
| gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; |
| }; |
| |
| button@1 { |
| label = "joy_left"; |
| linux,code = <KEY_LEFT>; |
| gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; |
| }; |
| |
| button@2 { |
| label = "joy_up"; |
| linux,code = <KEY_UP>; |
| gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; |
| }; |
| |
| button@3 { |
| label = "joy_right"; |
| linux,code = <KEY_RIGHT>; |
| gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; |
| }; |
| |
| button@4 { |
| label = "joy_down"; |
| linux,code = <KEY_DOWN>; |
| gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| leds_mmio { |
| compatible = "gpio-leds"; |
| |
| led1 { |
| gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led2 { |
| gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led3 { |
| gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led4 { |
| gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led5 { |
| gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led6 { |
| gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led7 { |
| gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led8 { |
| gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led9 { |
| gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led10 { |
| gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led11 { |
| gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led12 { |
| gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led13 { |
| gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led14 { |
| gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led15 { |
| gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led16 { |
| gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &pinctrl { |
| emc_pins: emc-pins { |
| emc_addr0_23_cfg { |
| pins = "p2_9", "p2_10", "p2_11", "p2_12", |
| "p2_13", "p1_0", "p1_1", "p1_2", |
| "p2_8", "p2_7", "p2_6", "p2_2", |
| "p2_1", "p2_0", "p6_8", "p6_7", |
| "pd_16", "pd_15", "pe_0", "pe_1", |
| "pe_2", "pe_3", "pe_4", "pa_4"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_data0_31_cfg { |
| pins = "p1_7", "p1_8", "p1_9", "p1_10", |
| "p1_11", "p1_12", "p1_13", "p1_14", |
| "p5_4", "p5_5", "p5_6", "p5_7", |
| "p5_0", "p5_1", "p5_2", "p5_3", |
| "pd_2", "pd_3", "pd_4", "pd_5", |
| "pd_6", "pd_7", "pd_8", "pd_9", |
| "pe_5", "pe_6", "pe_7", "pe_8", |
| "pe_9", "pe_10", "pe_11", "pe_12"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_we_oe_cfg { |
| pins = "p1_6", "p1_3"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_bls0_3_cfg { |
| pins = "p1_4", "p6_6", "pd_13", "pd_10"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_cs0_3_cfg { |
| pins = "p1_5", "p6_3", "pd_12", "pd_11"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_sdram_dqm0_3_cfg { |
| pins = "p6_12", "p6_10", "pd_0", "pe_13"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_sdram_ras_cas_cfg { |
| pins = "p6_5", "p6_4"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_sdram_dycs0_cfg { |
| pins = "p6_9"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_sdram_cke_cfg { |
| pins = "p6_11"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| emc_sdram_clock_cfg { |
| pins = "clk0", "clk1", "clk2", "clk3"; |
| function = "emc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| }; |
| |
| enet_rmii_pins: enet-rmii-pins { |
| enet_rmii_rxd_cfg { |
| pins = "p1_15", "p0_0"; |
| function = "enet"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_rmii_txd_cfg { |
| pins = "p1_18", "p1_20"; |
| function = "enet"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_rmii_rx_dv_cfg { |
| pins = "p1_16"; |
| function = "enet"; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_rmii_tx_en_cfg { |
| pins = "p0_1"; |
| function = "enet"; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_ref_clk_cfg { |
| pins = "p1_19"; |
| function = "enet"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_mdio_cfg { |
| pins = "p1_17"; |
| function = "enet"; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| enet_mdc_cfg { |
| pins = "pc_1"; |
| function = "enet"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| }; |
| |
| gpio_joystick_pins: gpio-joystick-pins { |
| gpio_joystick_cfg { |
| pins = "p9_0", "p9_1", "pa_1", "pa_2", "pa_3"; |
| function = "gpio"; |
| input-enable; |
| bias-disable; |
| }; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| i2c0_pins_cfg { |
| pins = "i2c0_scl", "i2c0_sda"; |
| function = "i2c0"; |
| input-enable; |
| }; |
| }; |
| |
| sdmmc_pins: sdmmc-pins { |
| sdmmc_clk_cfg { |
| pins = "pc_0"; |
| function = "sdmmc"; |
| slew-rate = <1>; |
| bias-pull-down; |
| }; |
| |
| sdmmc_cmd_dat0_3_cfg { |
| pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10"; |
| function = "sdmmc"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| sdmmc_cd_cfg { |
| pins = "pc_8"; |
| function = "sdmmc"; |
| bias-pull-down; |
| input-enable; |
| }; |
| |
| sdmmc_pow_cfg { |
| pins = "pc_9"; |
| function = "sdmmc"; |
| bias-pull-down; |
| }; |
| }; |
| |
| spifi_pins: spifi-pins { |
| spifi_clk_cfg { |
| pins = "p3_3"; |
| function = "spifi"; |
| slew-rate = <1>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| spifi_mosi_miso_sio2_3_cfg { |
| pins = "p3_7", "p3_6", "p3_5", "p3_4"; |
| function = "spifi"; |
| slew-rate = <0>; |
| bias-disable; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| spifi_cs_cfg { |
| pins = "p3_8"; |
| function = "spifi"; |
| bias-disable; |
| }; |
| }; |
| |
| ssp0_pins: ssp0-pins { |
| ssp0_sck_miso_mosi { |
| pins = "pf_0", "pf_2", "pf_3"; |
| function = "ssp0"; |
| slew-rate = <1>; |
| bias-pull-down; |
| input-enable; |
| input-schmitt-disable; |
| }; |
| |
| ssp0_ssel { |
| pins = "pf_1"; |
| function = "ssp0"; |
| bias-pull-up; |
| }; |
| }; |
| |
| uart0_pins: uart0-pins { |
| uart0_rx_cfg { |
| pins = "pf_11"; |
| function = "uart0"; |
| input-schmitt-disable; |
| bias-disable; |
| input-enable; |
| }; |
| |
| uart0_tx_cfg { |
| pins = "pf_10"; |
| function = "uart0"; |
| bias-pull-down; |
| }; |
| }; |
| |
| uart3_pins: uart3-pins { |
| uart3_rx_cfg { |
| pins = "p2_4"; |
| function = "uart3"; |
| input-schmitt-disable; |
| bias-disable; |
| input-enable; |
| }; |
| |
| uart3_tx_cfg { |
| pins = "p9_3"; |
| function = "uart3"; |
| bias-pull-down; |
| }; |
| }; |
| |
| usb0_pins: usb0-pins { |
| usb0_pwr_enable { |
| pins = "p2_3"; |
| function = "usb0"; |
| }; |
| |
| usb0_pwr_fault { |
| pins = "p8_0"; |
| function = "usb0"; |
| bias-disable; |
| input-enable; |
| }; |
| }; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| clock-frequency = <400000>; |
| |
| mma7455@1d { |
| compatible = "fsl,mma7455"; |
| reg = <0x1d>; |
| }; |
| |
| lm75@48 { |
| compatible = "nxp,lm75"; |
| reg = <0x48>; |
| }; |
| |
| eeprom@57 { |
| compatible = "microchip,24c64"; |
| reg = <0x57>; |
| }; |
| }; |
| |
| &emc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emc_pins>; |
| |
| cs0 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| |
| mpmc,cs = <0>; |
| mpmc,memory-width = <16>; |
| mpmc,byte-lane-low; |
| mpmc,write-enable-delay = <0>; |
| mpmc,output-enable-delay = <0>; |
| mpmc,read-access-delay = <70>; |
| mpmc,page-mode-read-delay = <70>; |
| |
| flash@0,0 { |
| compatible = "sst,sst39vf320", "cfi-flash"; |
| reg = <0 0 0x400000>; |
| bank-width = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "bootloader"; |
| reg = <0x000000 0x040000>; /* 256 KiB */ |
| }; |
| |
| partition@1 { |
| label = "kernel"; |
| reg = <0x040000 0x2c0000>; /* 2.75 MiB */ |
| }; |
| |
| partition@2 { |
| label = "rootfs"; |
| reg = <0x300000 0x100000>; /* 1 MiB */ |
| }; |
| }; |
| }; |
| |
| cs2 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| |
| mpmc,cs = <2>; |
| mpmc,memory-width = <16>; |
| |
| mmio_leds: gpio@2,0 { |
| compatible = "ti,7416374"; |
| reg = <2 0 0x2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| }; |
| }; |
| |
| &enet_tx_clk { |
| clock-frequency = <50000000>; |
| }; |
| |
| &mac { |
| status = "okay"; |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&enet_rmii_pins>; |
| }; |
| |
| &mmcsd { |
| status = "okay"; |
| bus-width = <4>; |
| vmmc-supply = <&vmmc>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_pins>; |
| }; |
| |
| &spifi { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spifi_pins>; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| spi-cpol; |
| spi-cpha; |
| spi-rx-bus-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "data"; |
| reg = <0 0x200000>; |
| }; |
| }; |
| }; |
| |
| &ssp0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ssp0_pins>; |
| num-cs = <1>; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| }; |
| |
| &uart3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb0_pins>; |
| }; |