Merge tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY/Serial patches from Greg Kroah-Hartman:
"Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
serial drivers. They were cherry-picked from the tty-next branch of
the tty git tree, as they are small and "obvious" fixes. The larger
changes, as mentioned before, will be saved for the 3.7-rc1 merge
window.
All of these changes have been in the linux-next releases for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix parity setting issue
pch_uart: Fix rx error interrupt setting issue
pch_uart: Fix missing break for 16 byte fifo
tty ldisc: Close/Reopen race prevention should check the proper flag
pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
vt: fix race in vt_waitactive()
serial/of-serial: Add LPC3220 standard UART compatible string
serial/8250: Add LPC3220 standard UART type
serial_core: Update buffer overrun statistics.
serial: samsung: Fixed wrong comparison for baudclk_rate
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index b8b27b0..0847fde 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -9,6 +9,7 @@
- "ns16750"
- "ns16850"
- "nvidia,tegra20-uart"
+ - "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 6e1958a..8123f78 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -282,6 +282,14 @@
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
},
+ [PORT_LPC3220] = {
+ .name = "LPC3220",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+ UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5410c06..34e7187 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -208,6 +208,7 @@
{ .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
+ { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4fdec6a6..558ce85 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -253,6 +253,9 @@
dma_addr_t rx_buf_dma;
struct dentry *debugfs;
+
+ /* protect the eg20t_port private structure and io access to membase */
+ spinlock_t lock;
};
/**
@@ -754,7 +757,8 @@
tty_flip_buffer_push(tty);
tty_kref_put(tty);
async_tx_ack(priv->desc_rx);
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
static void pch_dma_tx_complete(void *arg)
@@ -809,7 +813,8 @@
int rx_size;
int ret;
if (!priv->start_rx) {
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
return 0;
}
buf = &priv->rxbuf;
@@ -1058,7 +1063,7 @@
int next = 1;
u8 msr;
- spin_lock_irqsave(&priv->port.lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
handled = 0;
while (next) {
iid = pch_uart_hal_get_iid(priv);
@@ -1078,11 +1083,13 @@
case PCH_UART_IID_RDR: /* Received Data Ready */
if (priv->use_dma) {
pch_uart_hal_disable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
ret = dma_handle_rx(priv);
if (!ret)
pch_uart_hal_enable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
} else {
ret = handle_rx(priv);
}
@@ -1116,7 +1123,7 @@
handled |= (unsigned int)ret;
}
- spin_unlock_irqrestore(&priv->port.lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1208,7 +1215,8 @@
struct eg20t_port *priv;
priv = container_of(port, struct eg20t_port, port);
priv->start_rx = 0;
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
/* Enable the modem status interrupts. */
@@ -1226,9 +1234,9 @@
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1263,6 +1271,7 @@
break;
case 16:
fifo_size = PCH_UART_HAL_FIFO16;
+ break;
case 1:
default:
fifo_size = PCH_UART_HAL_FIFO_DIS;
@@ -1300,7 +1309,8 @@
pch_request_dma(port);
priv->start_rx = 1;
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
uart_update_timeout(port, CS8, default_baud);
return 0;
@@ -1358,7 +1368,7 @@
stb = PCH_UART_HAL_STB1;
if (termios->c_cflag & PARENB) {
- if (!(termios->c_cflag & PARODD))
+ if (termios->c_cflag & PARODD)
parity = PCH_UART_HAL_PARITY_ODD;
else
parity = PCH_UART_HAL_PARITY_EVEN;
@@ -1376,7 +1386,8 @@
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&port->lock);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1389,7 +1400,8 @@
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1538,8 +1550,9 @@
{
struct eg20t_port *priv;
unsigned long flags;
+ int priv_locked = 1;
+ int port_locked = 1;
u8 ier;
- int locked = 1;
priv = pch_uart_ports[co->index];
@@ -1547,12 +1560,16 @@
local_irq_save(flags);
if (priv->port.sysrq) {
- /* serial8250_handle_port() already took the lock */
- locked = 0;
+ spin_lock(&priv->lock);
+ /* serial8250_handle_port() already took the port lock */
+ port_locked = 0;
} else if (oops_in_progress) {
- locked = spin_trylock(&priv->port.lock);
- } else
+ priv_locked = spin_trylock(&priv->lock);
+ port_locked = spin_trylock(&priv->port.lock);
+ } else {
+ spin_lock(&priv->lock);
spin_lock(&priv->port.lock);
+ }
/*
* First save the IER then disable the interrupts
@@ -1570,8 +1587,10 @@
wait_for_xmitr(priv, BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
- if (locked)
+ if (port_locked)
spin_unlock(&priv->port.lock);
+ if (priv_locked)
+ spin_unlock(&priv->lock);
local_irq_restore(flags);
}
@@ -1669,6 +1688,8 @@
pci_enable_msi(pdev);
pci_set_master(pdev);
+ spin_lock_init(&priv->lock);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d8b0aee..02d07bf 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1014,10 +1014,10 @@
* a disturbance in the clock-rate over the change.
*/
- if (IS_ERR(port->clk))
+ if (IS_ERR(port->baudclk))
goto exit;
- if (port->baudclk_rate == clk_get_rate(port->clk))
+ if (port->baudclk_rate == clk_get_rate(port->baudclk))
goto exit;
if (val == CPUFREQ_PRECHANGE) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 246b823..a21dc8e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2527,14 +2527,16 @@
struct tty_struct *tty = port->state->port.tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
- tty_insert_flip_char(tty, ch, flag);
+ if (tty_insert_flip_char(tty, ch, flag) == 0)
+ ++port->icount.buf_overrun;
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (status & ~port->ignore_status_mask & overrun)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0)
+ ++port->icount.buf_overrun;
}
EXPORT_SYMBOL_GPL(uart_insert_char);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 9911eb6..6f99c99 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -659,7 +659,7 @@
goto enable;
}
- if (test_bit(TTY_HUPPED, &tty->flags)) {
+ if (test_bit(TTY_HUPPING, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
the ldisc data and closed the ldisc down */
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 6461854..b841f56 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -110,6 +110,34 @@
wake_up_interruptible(&vt_event_waitqueue);
}
+static void __vt_event_queue(struct vt_event_wait *vw)
+{
+ unsigned long flags;
+ /* Prepare the event */
+ INIT_LIST_HEAD(&vw->list);
+ vw->done = 0;
+ /* Queue our event */
+ spin_lock_irqsave(&vt_event_lock, flags);
+ list_add(&vw->list, &vt_events);
+ spin_unlock_irqrestore(&vt_event_lock, flags);
+}
+
+static void __vt_event_wait(struct vt_event_wait *vw)
+{
+ /* Wait for it to pass */
+ wait_event_interruptible(vt_event_waitqueue, vw->done);
+}
+
+static void __vt_event_dequeue(struct vt_event_wait *vw)
+{
+ unsigned long flags;
+
+ /* Dequeue it */
+ spin_lock_irqsave(&vt_event_lock, flags);
+ list_del(&vw->list);
+ spin_unlock_irqrestore(&vt_event_lock, flags);
+}
+
/**
* vt_event_wait - wait for an event
* @vw: our event
@@ -121,20 +149,9 @@
static void vt_event_wait(struct vt_event_wait *vw)
{
- unsigned long flags;
- /* Prepare the event */
- INIT_LIST_HEAD(&vw->list);
- vw->done = 0;
- /* Queue our event */
- spin_lock_irqsave(&vt_event_lock, flags);
- list_add(&vw->list, &vt_events);
- spin_unlock_irqrestore(&vt_event_lock, flags);
- /* Wait for it to pass */
- wait_event_interruptible(vt_event_waitqueue, vw->done);
- /* Dequeue it */
- spin_lock_irqsave(&vt_event_lock, flags);
- list_del(&vw->list);
- spin_unlock_irqrestore(&vt_event_lock, flags);
+ __vt_event_queue(vw);
+ __vt_event_wait(vw);
+ __vt_event_dequeue(vw);
}
/**
@@ -177,10 +194,14 @@
{
struct vt_event_wait vw;
do {
- if (n == fg_console + 1)
- break;
vw.event.event = VT_EVENT_SWITCH;
- vt_event_wait(&vw);
+ __vt_event_queue(&vw);
+ if (n == fg_console + 1) {
+ __vt_event_dequeue(&vw);
+ break;
+ }
+ __vt_event_wait(&vw);
+ __vt_event_dequeue(&vw);
if (vw.done == 0)
return -EINTR;
} while (vw.event.newev != n);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 65db992..0253c20 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -47,7 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_MAX_8250 21 /* max port ID */
+#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
+#define PORT_MAX_8250 22 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed