| /* |
| * Rockchip usb PHY driver |
| * |
| * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com> |
| * Copyright (C) 2014 ROCKCHIP, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| |
| static int enable_usb_uart; |
| |
| #define HIWORD_UPDATE(val, mask) \ |
| ((val) | (mask) << 16) |
| |
| #define UOC_CON0_SIDDQ BIT(13) |
| |
| struct rockchip_usb_phys { |
| int reg; |
| const char *pll_name; |
| }; |
| |
| struct rockchip_usb_phy_base; |
| struct rockchip_usb_phy_pdata { |
| struct rockchip_usb_phys *phys; |
| int (*init_usb_uart)(struct regmap *grf); |
| int usb_uart_phy; |
| }; |
| |
| struct rockchip_usb_phy_base { |
| struct device *dev; |
| struct regmap *reg_base; |
| const struct rockchip_usb_phy_pdata *pdata; |
| }; |
| |
| struct rockchip_usb_phy { |
| struct rockchip_usb_phy_base *base; |
| struct device_node *np; |
| unsigned int reg_offset; |
| struct clk *clk; |
| struct clk *clk480m; |
| struct clk_hw clk480m_hw; |
| struct phy *phy; |
| bool uart_enabled; |
| }; |
| |
| static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, |
| bool siddq) |
| { |
| u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ); |
| |
| return regmap_write(phy->base->reg_base, phy->reg_offset, val); |
| } |
| |
| static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return 480000000; |
| } |
| |
| static void rockchip_usb_phy480m_disable(struct clk_hw *hw) |
| { |
| struct rockchip_usb_phy *phy = container_of(hw, |
| struct rockchip_usb_phy, |
| clk480m_hw); |
| |
| /* Power down usb phy analog blocks by set siddq 1 */ |
| rockchip_usb_phy_power(phy, 1); |
| } |
| |
| static int rockchip_usb_phy480m_enable(struct clk_hw *hw) |
| { |
| struct rockchip_usb_phy *phy = container_of(hw, |
| struct rockchip_usb_phy, |
| clk480m_hw); |
| |
| /* Power up usb phy analog blocks by set siddq 0 */ |
| return rockchip_usb_phy_power(phy, 0); |
| } |
| |
| static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw) |
| { |
| struct rockchip_usb_phy *phy = container_of(hw, |
| struct rockchip_usb_phy, |
| clk480m_hw); |
| int ret; |
| u32 val; |
| |
| ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val); |
| if (ret < 0) |
| return ret; |
| |
| return (val & UOC_CON0_SIDDQ) ? 0 : 1; |
| } |
| |
| static const struct clk_ops rockchip_usb_phy480m_ops = { |
| .enable = rockchip_usb_phy480m_enable, |
| .disable = rockchip_usb_phy480m_disable, |
| .is_enabled = rockchip_usb_phy480m_is_enabled, |
| .recalc_rate = rockchip_usb_phy480m_recalc_rate, |
| }; |
| |
| static int rockchip_usb_phy_power_off(struct phy *_phy) |
| { |
| struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); |
| |
| if (phy->uart_enabled) |
| return -EBUSY; |
| |
| clk_disable_unprepare(phy->clk480m); |
| |
| return 0; |
| } |
| |
| static int rockchip_usb_phy_power_on(struct phy *_phy) |
| { |
| struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); |
| |
| if (phy->uart_enabled) |
| return -EBUSY; |
| |
| return clk_prepare_enable(phy->clk480m); |
| } |
| |
| static const struct phy_ops ops = { |
| .power_on = rockchip_usb_phy_power_on, |
| .power_off = rockchip_usb_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static void rockchip_usb_phy_action(void *data) |
| { |
| struct rockchip_usb_phy *rk_phy = data; |
| |
| if (!rk_phy->uart_enabled) { |
| of_clk_del_provider(rk_phy->np); |
| clk_unregister(rk_phy->clk480m); |
| } |
| |
| if (rk_phy->clk) |
| clk_put(rk_phy->clk); |
| } |
| |
| static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, |
| struct device_node *child) |
| { |
| struct rockchip_usb_phy *rk_phy; |
| unsigned int reg_offset; |
| const char *clk_name; |
| struct clk_init_data init; |
| int err, i; |
| |
| rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL); |
| if (!rk_phy) |
| return -ENOMEM; |
| |
| rk_phy->base = base; |
| rk_phy->np = child; |
| |
| if (of_property_read_u32(child, "reg", ®_offset)) { |
| dev_err(base->dev, "missing reg property in node %s\n", |
| child->name); |
| return -EINVAL; |
| } |
| |
| rk_phy->reg_offset = reg_offset; |
| |
| rk_phy->clk = of_clk_get_by_name(child, "phyclk"); |
| if (IS_ERR(rk_phy->clk)) |
| rk_phy->clk = NULL; |
| |
| i = 0; |
| init.name = NULL; |
| while (base->pdata->phys[i].reg) { |
| if (base->pdata->phys[i].reg == reg_offset) { |
| init.name = base->pdata->phys[i].pll_name; |
| break; |
| } |
| i++; |
| } |
| |
| if (!init.name) { |
| dev_err(base->dev, "phy data not found\n"); |
| return -EINVAL; |
| } |
| |
| if (enable_usb_uart && base->pdata->usb_uart_phy == i) { |
| dev_dbg(base->dev, "phy%d used as uart output\n", i); |
| rk_phy->uart_enabled = true; |
| } else { |
| if (rk_phy->clk) { |
| clk_name = __clk_get_name(rk_phy->clk); |
| init.flags = 0; |
| init.parent_names = &clk_name; |
| init.num_parents = 1; |
| } else { |
| init.flags = 0; |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| } |
| |
| init.ops = &rockchip_usb_phy480m_ops; |
| rk_phy->clk480m_hw.init = &init; |
| |
| rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw); |
| if (IS_ERR(rk_phy->clk480m)) { |
| err = PTR_ERR(rk_phy->clk480m); |
| goto err_clk; |
| } |
| |
| err = of_clk_add_provider(child, of_clk_src_simple_get, |
| rk_phy->clk480m); |
| if (err < 0) |
| goto err_clk_prov; |
| } |
| |
| err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy); |
| if (err) |
| goto err_devm_action; |
| |
| rk_phy->phy = devm_phy_create(base->dev, child, &ops); |
| if (IS_ERR(rk_phy->phy)) { |
| dev_err(base->dev, "failed to create PHY\n"); |
| return PTR_ERR(rk_phy->phy); |
| } |
| phy_set_drvdata(rk_phy->phy, rk_phy); |
| |
| /* |
| * When acting as uart-pipe, just keep clock on otherwise |
| * only power up usb phy when it use, so disable it when init |
| */ |
| if (rk_phy->uart_enabled) |
| return clk_prepare_enable(rk_phy->clk); |
| else |
| return rockchip_usb_phy_power(rk_phy, 1); |
| |
| err_devm_action: |
| if (!rk_phy->uart_enabled) |
| of_clk_del_provider(child); |
| err_clk_prov: |
| if (!rk_phy->uart_enabled) |
| clk_unregister(rk_phy->clk480m); |
| err_clk: |
| if (rk_phy->clk) |
| clk_put(rk_phy->clk); |
| return err; |
| } |
| |
| static const struct rockchip_usb_phy_pdata rk3066a_pdata = { |
| .phys = (struct rockchip_usb_phys[]){ |
| { .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" }, |
| { .reg = 0x188, .pll_name = "sclk_otgphy1_480m" }, |
| { /* sentinel */ } |
| }, |
| }; |
| |
| static const struct rockchip_usb_phy_pdata rk3188_pdata = { |
| .phys = (struct rockchip_usb_phys[]){ |
| { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" }, |
| { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" }, |
| { /* sentinel */ } |
| }, |
| }; |
| |
| #define RK3288_UOC0_CON0 0x320 |
| #define RK3288_UOC0_CON0_COMMON_ON_N BIT(0) |
| #define RK3288_UOC0_CON0_DISABLE BIT(4) |
| |
| #define RK3288_UOC0_CON2 0x328 |
| #define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2) |
| |
| #define RK3288_UOC0_CON3 0x32c |
| #define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0) |
| #define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1) |
| #define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1) |
| #define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3) |
| #define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3) |
| #define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5) |
| #define RK3288_UOC0_CON3_BYPASSDMEN BIT(6) |
| #define RK3288_UOC0_CON3_BYPASSSEL BIT(7) |
| |
| /* |
| * Enable the bypass of uart2 data through the otg usb phy. |
| * Original description in the TRM. |
| * 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1. |
| * 2. Disable the pull-up resistance on the D+ line by setting |
| * OPMODE0[1:0] to 2’b01. |
| * 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend |
| * mode, set COMMONONN to 1’b1. |
| * 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0. |
| * 5. Set BYPASSSEL0 to 1’b1. |
| * 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0. |
| * To receive data, monitor FSVPLUS0. |
| * |
| * The actual code in the vendor kernel does some things differently. |
| */ |
| static int __init rk3288_init_usb_uart(struct regmap *grf) |
| { |
| u32 val; |
| int ret; |
| |
| /* |
| * COMMON_ON and DISABLE settings are described in the TRM, |
| * but were not present in the original code. |
| * Also disable the analog phy components to save power. |
| */ |
| val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N |
| | RK3288_UOC0_CON0_DISABLE |
| | UOC_CON0_SIDDQ, |
| RK3288_UOC0_CON0_COMMON_ON_N |
| | RK3288_UOC0_CON0_DISABLE |
| | UOC_CON0_SIDDQ); |
| ret = regmap_write(grf, RK3288_UOC0_CON0, val); |
| if (ret) |
| return ret; |
| |
| val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL, |
| RK3288_UOC0_CON2_SOFT_CON_SEL); |
| ret = regmap_write(grf, RK3288_UOC0_CON2, val); |
| if (ret) |
| return ret; |
| |
| val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING |
| | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC |
| | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED, |
| RK3288_UOC0_CON3_UTMI_SUSPENDN |
| | RK3288_UOC0_CON3_UTMI_OPMODE_MASK |
| | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK |
| | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED); |
| ret = regmap_write(grf, RK3288_UOC0_CON3, val); |
| if (ret) |
| return ret; |
| |
| val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL |
| | RK3288_UOC0_CON3_BYPASSDMEN, |
| RK3288_UOC0_CON3_BYPASSSEL |
| | RK3288_UOC0_CON3_BYPASSDMEN); |
| ret = regmap_write(grf, RK3288_UOC0_CON3, val); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct rockchip_usb_phy_pdata rk3288_pdata = { |
| .phys = (struct rockchip_usb_phys[]){ |
| { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" }, |
| { .reg = 0x334, .pll_name = "sclk_otgphy1_480m" }, |
| { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" }, |
| { /* sentinel */ } |
| }, |
| .init_usb_uart = rk3288_init_usb_uart, |
| .usb_uart_phy = 0, |
| }; |
| |
| static int rockchip_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rockchip_usb_phy_base *phy_base; |
| struct phy_provider *phy_provider; |
| const struct of_device_id *match; |
| struct device_node *child; |
| int err; |
| |
| phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL); |
| if (!phy_base) |
| return -ENOMEM; |
| |
| match = of_match_device(dev->driver->of_match_table, dev); |
| if (!match || !match->data) { |
| dev_err(dev, "missing phy data\n"); |
| return -EINVAL; |
| } |
| |
| phy_base->pdata = match->data; |
| |
| phy_base->dev = dev; |
| phy_base->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "rockchip,grf"); |
| if (IS_ERR(phy_base->reg_base)) { |
| dev_err(&pdev->dev, "Missing rockchip,grf property\n"); |
| return PTR_ERR(phy_base->reg_base); |
| } |
| |
| for_each_available_child_of_node(dev->of_node, child) { |
| err = rockchip_usb_phy_init(phy_base, child); |
| if (err) { |
| of_node_put(child); |
| return err; |
| } |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id rockchip_usb_phy_dt_ids[] = { |
| { .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata }, |
| { .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata }, |
| { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids); |
| |
| static struct platform_driver rockchip_usb_driver = { |
| .probe = rockchip_usb_phy_probe, |
| .driver = { |
| .name = "rockchip-usb-phy", |
| .of_match_table = rockchip_usb_phy_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(rockchip_usb_driver); |
| |
| #ifndef MODULE |
| static int __init rockchip_init_usb_uart(void) |
| { |
| const struct of_device_id *match; |
| const struct rockchip_usb_phy_pdata *data; |
| struct device_node *np; |
| struct regmap *grf; |
| int ret; |
| |
| if (!enable_usb_uart) |
| return 0; |
| |
| np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids, |
| &match); |
| if (!np) { |
| pr_err("%s: failed to find usbphy node\n", __func__); |
| return -ENOTSUPP; |
| } |
| |
| pr_debug("%s: using settings for %s\n", __func__, match->compatible); |
| data = match->data; |
| |
| if (!data->init_usb_uart) { |
| pr_err("%s: usb-uart not available on %s\n", |
| __func__, match->compatible); |
| return -ENOTSUPP; |
| } |
| |
| grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); |
| if (IS_ERR(grf)) { |
| pr_err("%s: Missing rockchip,grf property, %lu\n", |
| __func__, PTR_ERR(grf)); |
| return PTR_ERR(grf); |
| } |
| |
| ret = data->init_usb_uart(grf); |
| if (ret) { |
| pr_err("%s: could not init usb_uart, %d\n", __func__, ret); |
| enable_usb_uart = 0; |
| return ret; |
| } |
| |
| return 0; |
| } |
| early_initcall(rockchip_init_usb_uart); |
| |
| static int __init rockchip_usb_uart(char *buf) |
| { |
| enable_usb_uart = true; |
| return 0; |
| } |
| early_param("rockchip.usb_uart", rockchip_usb_uart); |
| #endif |
| |
| MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>"); |
| MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); |
| MODULE_LICENSE("GPL v2"); |