[MTD] [NAND] fix possible Ooops in rfc_from4
I found this while I was looking how the rs_lib is working. The rs_decoder is
initialized _after_ the nand core code read the BBT table and _after_ the
partition table has been added. The driver has a private BBT description
which is in located in flash data so we Ooops if there is a bit flip _or_ if a
bit flips while reading the partition table.
This patch moves the initialization of the rs_lib before the first possible
access by nand core.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jörn Engel <joern@wh.fh-wedel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 0f6ac25..26f8821 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -478,6 +478,7 @@
struct nand_chip *this;
unsigned short bcr1, bcr2, wcr2;
int i;
+ int ret;
/* Allocate memory for MTD device structure and private data */
rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
@@ -537,6 +538,22 @@
this->ecc.hwctl = rtc_from4_enable_hwecc;
this->ecc.calculate = rtc_from4_calculate_ecc;
this->ecc.correct = rtc_from4_correct_data;
+
+ /* We could create the decoder on demand, if memory is a concern.
+ * This way we have it handy, if an error happens
+ *
+ * Symbolsize is 10 (bits)
+ * Primitve polynomial is x^10+x^3+1
+ * first consecutive root is 0
+ * primitve element to generate roots = 1
+ * generator polinomial degree = 6
+ */
+ rs_decoder = init_rs(10, 0x409, 0, 1, 6);
+ if (!rs_decoder) {
+ printk(KERN_ERR "Could not create a RS decoder\n");
+ ret = -ENOMEM;
+ goto err_1;
+ }
#else
printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
@@ -549,8 +566,8 @@
/* Scan to find existence of the device */
if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) {
- kfree(rtc_from4_mtd);
- return -ENXIO;
+ ret = -ENXIO;
+ goto err_2;
}
/* Perform 'device recovery' for each chip in case there was a power loss. */
@@ -566,28 +583,19 @@
#endif
/* Register the partitions */
- add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
+ ret = add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
+ if (ret)
+ goto err_3;
-#ifdef RTC_FROM4_HWECC
- /* We could create the decoder on demand, if memory is a concern.
- * This way we have it handy, if an error happens
- *
- * Symbolsize is 10 (bits)
- * Primitve polynomial is x^10+x^3+1
- * first consecutive root is 0
- * primitve element to generate roots = 1
- * generator polinomial degree = 6
- */
- rs_decoder = init_rs(10, 0x409, 0, 1, 6);
- if (!rs_decoder) {
- printk(KERN_ERR "Could not create a RS decoder\n");
- nand_release(rtc_from4_mtd);
- kfree(rtc_from4_mtd);
- return -ENOMEM;
- }
-#endif
/* Return happy */
return 0;
+err_3:
+ nand_release(rtc_from4_mtd);
+err_2:
+ free_rs(rs_decoder);
+err_1:
+ kfree(rtc_from4_mtd);
+ return ret;
}
module_init(rtc_from4_init);