| /* $Id: spitfire.h,v 1.18 2001/11/29 16:42:10 kanoj Exp $ |
| * spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations. |
| * |
| * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) |
| */ |
| |
| #ifndef _SPARC64_SPITFIRE_H |
| #define _SPARC64_SPITFIRE_H |
| |
| #include <asm/asi.h> |
| |
| /* The following register addresses are accessible via ASI_DMMU |
| * and ASI_IMMU, that is there is a distinct and unique copy of |
| * each these registers for each TLB. |
| */ |
| #define TSB_TAG_TARGET 0x0000000000000000 /* All chips */ |
| #define TLB_SFSR 0x0000000000000018 /* All chips */ |
| #define TSB_REG 0x0000000000000028 /* All chips */ |
| #define TLB_TAG_ACCESS 0x0000000000000030 /* All chips */ |
| #define VIRT_WATCHPOINT 0x0000000000000038 /* All chips */ |
| #define PHYS_WATCHPOINT 0x0000000000000040 /* All chips */ |
| #define TSB_EXTENSION_P 0x0000000000000048 /* Ultra-III and later */ |
| #define TSB_EXTENSION_S 0x0000000000000050 /* Ultra-III and later, D-TLB only */ |
| #define TSB_EXTENSION_N 0x0000000000000058 /* Ultra-III and later */ |
| #define TLB_TAG_ACCESS_EXT 0x0000000000000060 /* Ultra-III+ and later */ |
| |
| /* These registers only exist as one entity, and are accessed |
| * via ASI_DMMU only. |
| */ |
| #define PRIMARY_CONTEXT 0x0000000000000008 |
| #define SECONDARY_CONTEXT 0x0000000000000010 |
| #define DMMU_SFAR 0x0000000000000020 |
| #define VIRT_WATCHPOINT 0x0000000000000038 |
| #define PHYS_WATCHPOINT 0x0000000000000040 |
| |
| #define SPITFIRE_HIGHEST_LOCKED_TLBENT (64 - 1) |
| #define CHEETAH_HIGHEST_LOCKED_TLBENT (16 - 1) |
| |
| #define L1DCACHE_SIZE 0x4000 |
| |
| #ifndef __ASSEMBLY__ |
| |
| enum ultra_tlb_layout { |
| spitfire = 0, |
| cheetah = 1, |
| cheetah_plus = 2, |
| }; |
| |
| extern enum ultra_tlb_layout tlb_type; |
| |
| extern int cheetah_pcache_forced_on; |
| extern void cheetah_enable_pcache(void); |
| |
| #define sparc64_highest_locked_tlbent() \ |
| (tlb_type == spitfire ? \ |
| SPITFIRE_HIGHEST_LOCKED_TLBENT : \ |
| CHEETAH_HIGHEST_LOCKED_TLBENT) |
| |
| static __inline__ unsigned long spitfire_get_isfsr(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (ret) |
| : "r" (TLB_SFSR), "i" (ASI_IMMU)); |
| return ret; |
| } |
| |
| static __inline__ unsigned long spitfire_get_dsfsr(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (ret) |
| : "r" (TLB_SFSR), "i" (ASI_DMMU)); |
| return ret; |
| } |
| |
| static __inline__ unsigned long spitfire_get_sfar(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (ret) |
| : "r" (DMMU_SFAR), "i" (ASI_DMMU)); |
| return ret; |
| } |
| |
| static __inline__ void spitfire_put_isfsr(unsigned long sfsr) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (sfsr), "r" (TLB_SFSR), "i" (ASI_IMMU)); |
| } |
| |
| static __inline__ void spitfire_put_dsfsr(unsigned long sfsr) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (sfsr), "r" (TLB_SFSR), "i" (ASI_DMMU)); |
| } |
| |
| /* The data cache is write through, so this just invalidates the |
| * specified line. |
| */ |
| static __inline__ void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG)); |
| } |
| |
| /* The instruction cache lines are flushed with this, but note that |
| * this does not flush the pipeline. It is possible for a line to |
| * get flushed but stale instructions to still be in the pipeline, |
| * a flush instruction (to any address) is sufficient to handle |
| * this issue after the line is invalidated. |
| */ |
| static __inline__ void spitfire_put_icache_tag(unsigned long addr, unsigned long tag) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (tag), "r" (addr), "i" (ASI_IC_TAG)); |
| } |
| |
| static __inline__ unsigned long spitfire_get_dtlb_data(int entry) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS)); |
| |
| /* Clear TTE diag bits. */ |
| data &= ~0x0003fe0000000000UL; |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long spitfire_get_dtlb_tag(int entry) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ)); |
| return tag; |
| } |
| |
| static __inline__ void spitfire_put_dtlb_data(int entry, unsigned long data) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), "r" (entry << 3), |
| "i" (ASI_DTLB_DATA_ACCESS)); |
| } |
| |
| static __inline__ unsigned long spitfire_get_itlb_data(int entry) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS)); |
| |
| /* Clear TTE diag bits. */ |
| data &= ~0x0003fe0000000000UL; |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long spitfire_get_itlb_tag(int entry) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ)); |
| return tag; |
| } |
| |
| static __inline__ void spitfire_put_itlb_data(int entry, unsigned long data) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), "r" (entry << 3), |
| "i" (ASI_ITLB_DATA_ACCESS)); |
| } |
| |
| /* Spitfire hardware assisted TLB flushes. */ |
| |
| /* Context level flushes. */ |
| static __inline__ void spitfire_flush_dtlb_primary_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x40), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_primary_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x40), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_dtlb_secondary_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x50), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_secondary_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x50), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_dtlb_nucleus_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x60), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_nucleus_context(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x60), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| /* Page level flushes. */ |
| static __inline__ void spitfire_flush_dtlb_primary_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_primary_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_dtlb_secondary_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page | 0x10), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_secondary_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page | 0x10), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_dtlb_nucleus_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void spitfire_flush_itlb_nucleus_page(unsigned long page) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| /* Cheetah has "all non-locked" tlb flushes. */ |
| static __inline__ void cheetah_flush_dtlb_all(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x80), "i" (ASI_DMMU_DEMAP)); |
| } |
| |
| static __inline__ void cheetah_flush_itlb_all(void) |
| { |
| __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (0x80), "i" (ASI_IMMU_DEMAP)); |
| } |
| |
| /* Cheetah has a 4-tlb layout so direct access is a bit different. |
| * The first two TLBs are fully assosciative, hold 16 entries, and are |
| * used only for locked and >8K sized translations. One exists for |
| * data accesses and one for instruction accesses. |
| * |
| * The third TLB is for data accesses to 8K non-locked translations, is |
| * 2 way assosciative, and holds 512 entries. The fourth TLB is for |
| * instruction accesses to 8K non-locked translations, is 2 way |
| * assosciative, and holds 128 entries. |
| * |
| * Cheetah has some bug where bogus data can be returned from |
| * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes |
| * the problem for me. -DaveM |
| */ |
| static __inline__ unsigned long cheetah_get_ldtlb_data(int entry) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" |
| "ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_DTLB_DATA_ACCESS)); |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long cheetah_get_litlb_data(int entry) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" |
| "ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_ITLB_DATA_ACCESS)); |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long cheetah_get_ldtlb_tag(int entry) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_DTLB_TAG_READ)); |
| |
| return tag; |
| } |
| |
| static __inline__ unsigned long cheetah_get_litlb_tag(int entry) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_ITLB_TAG_READ)); |
| |
| return tag; |
| } |
| |
| static __inline__ void cheetah_put_ldtlb_data(int entry, unsigned long data) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), |
| "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_DTLB_DATA_ACCESS)); |
| } |
| |
| static __inline__ void cheetah_put_litlb_data(int entry, unsigned long data) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), |
| "r" ((0 << 16) | (entry << 3)), |
| "i" (ASI_ITLB_DATA_ACCESS)); |
| } |
| |
| static __inline__ unsigned long cheetah_get_dtlb_data(int entry, int tlb) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" |
| "ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS)); |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long cheetah_get_dtlb_tag(int entry, int tlb) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ)); |
| return tag; |
| } |
| |
| static __inline__ void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), |
| "r" ((tlb << 16) | (entry << 3)), |
| "i" (ASI_DTLB_DATA_ACCESS)); |
| } |
| |
| static __inline__ unsigned long cheetah_get_itlb_data(int entry) |
| { |
| unsigned long data; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" |
| "ldxa [%1] %2, %0" |
| : "=r" (data) |
| : "r" ((2 << 16) | (entry << 3)), |
| "i" (ASI_ITLB_DATA_ACCESS)); |
| |
| return data; |
| } |
| |
| static __inline__ unsigned long cheetah_get_itlb_tag(int entry) |
| { |
| unsigned long tag; |
| |
| __asm__ __volatile__("ldxa [%1] %2, %0" |
| : "=r" (tag) |
| : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ)); |
| return tag; |
| } |
| |
| static __inline__ void cheetah_put_itlb_data(int entry, unsigned long data) |
| { |
| __asm__ __volatile__("stxa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* No outputs */ |
| : "r" (data), "r" ((2 << 16) | (entry << 3)), |
| "i" (ASI_ITLB_DATA_ACCESS)); |
| } |
| |
| #endif /* !(__ASSEMBLY__) */ |
| |
| #endif /* !(_SPARC64_SPITFIRE_H) */ |