ARM: plat-nomadik: convert platforms to SPARSE_IRQ
This converts the Nomadik and Ux500 platforms to use SPARSE_IRQ.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8dae1e0..200acec 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -885,6 +885,7 @@
select GENERIC_CLOCKEVENTS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select SPARSE_IRQ
help
Support for ST-Ericsson's Ux500 architecture
@@ -899,6 +900,7 @@
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_STN8815
+ select SPARSE_IRQ
help
Support for the Nomadik platform by ST-Ericsson
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index a118e615..b549d05 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -72,7 +72,7 @@
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
-#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
#define VIC_REG_IRQSR0 0
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 0213e89..9268056 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -1,4 +1,3 @@
-
/*
* Copyright (C) 2008-2009 ST-Ericsson
*
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 87a8f9f..8bff078 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,6 +26,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/db8500-regs.h>
+#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 692a77a..16b5f71 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -14,6 +14,7 @@
#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include "devices-common.h"
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index bdc963c..318d490 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -16,6 +16,7 @@
#include <mach/hardware.h>
#include <mach/setup.h>
+#include <mach/irqs.h>
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3c8010f..4b24c99 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
+#include <mach/irqs.h>
#include "devices-common.h"
struct ske_keypad_platform_data;
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index e892854..fc77b42 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -46,6 +46,6 @@
#include <mach/irqs-board-mop500.h>
#endif
-#define NR_IRQS IRQ_BOARD_END
+#define UX500_NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index a490523..3ad23fb 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -45,9 +45,8 @@
static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
#endif
#include <linux/platform_data/pinctrl-nomadik.h>
-
#include <asm/mach/irq.h>
-
+#include <mach/irqs.h>
#include "pinctrl-nomadik.h"
/*