| /* |
| * HCI based Driver for NXP PN544 NFC Chip |
| * |
| * Copyright (C) 2012 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the |
| * Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/crc-ccitt.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/miscdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| |
| #include <linux/nfc.h> |
| #include <net/nfc/hci.h> |
| #include <net/nfc/llc.h> |
| |
| #include <linux/nfc/pn544.h> |
| |
| #define DRIVER_DESC "HCI NFC driver for PN544" |
| |
| #define PN544_HCI_DRIVER_NAME "pn544_hci" |
| |
| /* Timing restrictions (ms) */ |
| #define PN544_HCI_RESETVEN_TIME 30 |
| |
| static struct i2c_device_id pn544_hci_id_table[] = { |
| {"pn544", 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, pn544_hci_id_table); |
| |
| #define HCI_MODE 0 |
| #define FW_MODE 1 |
| |
| /* framing in HCI mode */ |
| #define PN544_HCI_LLC_LEN 1 |
| #define PN544_HCI_LLC_CRC 2 |
| #define PN544_HCI_LLC_LEN_CRC (PN544_HCI_LLC_LEN + PN544_HCI_LLC_CRC) |
| #define PN544_HCI_LLC_MIN_SIZE (1 + PN544_HCI_LLC_LEN_CRC) |
| #define PN544_HCI_LLC_MAX_PAYLOAD 29 |
| #define PN544_HCI_LLC_MAX_SIZE (PN544_HCI_LLC_LEN_CRC + 1 + \ |
| PN544_HCI_LLC_MAX_PAYLOAD) |
| |
| enum pn544_state { |
| PN544_ST_COLD, |
| PN544_ST_FW_READY, |
| PN544_ST_READY, |
| }; |
| |
| #define FULL_VERSION_LEN 11 |
| |
| /* Proprietary commands */ |
| #define PN544_WRITE 0x3f |
| |
| /* Proprietary gates, events, commands and registers */ |
| |
| /* NFC_HCI_RF_READER_A_GATE additional registers and commands */ |
| #define PN544_RF_READER_A_AUTO_ACTIVATION 0x10 |
| #define PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION 0x12 |
| #define PN544_MIFARE_CMD 0x21 |
| |
| /* Commands that apply to all RF readers */ |
| #define PN544_RF_READER_CMD_PRESENCE_CHECK 0x30 |
| #define PN544_RF_READER_CMD_ACTIVATE_NEXT 0x32 |
| |
| /* NFC_HCI_ID_MGMT_GATE additional registers */ |
| #define PN544_ID_MGMT_FULL_VERSION_SW 0x10 |
| |
| #define PN544_RF_READER_ISO15693_GATE 0x12 |
| |
| #define PN544_RF_READER_F_GATE 0x14 |
| #define PN544_FELICA_ID 0x04 |
| #define PN544_FELICA_RAW 0x20 |
| |
| #define PN544_RF_READER_JEWEL_GATE 0x15 |
| #define PN544_JEWEL_RAW_CMD 0x23 |
| |
| #define PN544_RF_READER_NFCIP1_INITIATOR_GATE 0x30 |
| #define PN544_RF_READER_NFCIP1_TARGET_GATE 0x31 |
| |
| #define PN544_SYS_MGMT_GATE 0x90 |
| #define PN544_SYS_MGMT_INFO_NOTIFICATION 0x02 |
| |
| #define PN544_POLLING_LOOP_MGMT_GATE 0x94 |
| #define PN544_DEP_MODE 0x01 |
| #define PN544_DEP_ATR_REQ 0x02 |
| #define PN544_DEP_ATR_RES 0x03 |
| #define PN544_DEP_MERGE 0x0D |
| #define PN544_PL_RDPHASES 0x06 |
| #define PN544_PL_EMULATION 0x07 |
| #define PN544_PL_NFCT_DEACTIVATED 0x09 |
| |
| #define PN544_SWP_MGMT_GATE 0xA0 |
| |
| #define PN544_NFC_WI_MGMT_GATE 0xA1 |
| |
| #define PN544_HCI_EVT_SND_DATA 0x01 |
| #define PN544_HCI_EVT_ACTIVATED 0x02 |
| #define PN544_HCI_EVT_DEACTIVATED 0x03 |
| #define PN544_HCI_EVT_RCV_DATA 0x04 |
| #define PN544_HCI_EVT_CONTINUE_MI 0x05 |
| |
| #define PN544_HCI_CMD_CONTINUE_ACTIVATION 0x13 |
| |
| static struct nfc_hci_gate pn544_gates[] = { |
| {NFC_HCI_ADMIN_GATE, NFC_HCI_INVALID_PIPE}, |
| {NFC_HCI_LOOPBACK_GATE, NFC_HCI_INVALID_PIPE}, |
| {NFC_HCI_ID_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {NFC_HCI_LINK_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {NFC_HCI_RF_READER_B_GATE, NFC_HCI_INVALID_PIPE}, |
| {NFC_HCI_RF_READER_A_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_SYS_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_SWP_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_POLLING_LOOP_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_NFC_WI_MGMT_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_RF_READER_F_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_RF_READER_JEWEL_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_RF_READER_ISO15693_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_RF_READER_NFCIP1_INITIATOR_GATE, NFC_HCI_INVALID_PIPE}, |
| {PN544_RF_READER_NFCIP1_TARGET_GATE, NFC_HCI_INVALID_PIPE} |
| }; |
| |
| /* Largest headroom needed for outgoing custom commands */ |
| #define PN544_CMDS_HEADROOM 2 |
| #define PN544_FRAME_HEADROOM 1 |
| #define PN544_FRAME_TAILROOM 2 |
| |
| struct pn544_hci_info { |
| struct i2c_client *i2c_dev; |
| struct nfc_hci_dev *hdev; |
| |
| enum pn544_state state; |
| |
| struct mutex info_lock; |
| |
| unsigned int gpio_en; |
| unsigned int gpio_irq; |
| unsigned int gpio_fw; |
| unsigned int en_polarity; |
| |
| int hard_fault; /* |
| * < 0 if hardware error occured (e.g. i2c err) |
| * and prevents normal operation. |
| */ |
| int async_cb_type; |
| data_exchange_cb_t async_cb; |
| void *async_cb_context; |
| }; |
| |
| static void pn544_hci_platform_init(struct pn544_hci_info *info) |
| { |
| int polarity, retry, ret; |
| char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 }; |
| int count = sizeof(rset_cmd); |
| |
| pr_info(DRIVER_DESC ": %s\n", __func__); |
| dev_info(&info->i2c_dev->dev, "Detecting nfc_en polarity\n"); |
| |
| /* Disable fw download */ |
| gpio_set_value(info->gpio_fw, 0); |
| |
| for (polarity = 0; polarity < 2; polarity++) { |
| info->en_polarity = polarity; |
| retry = 3; |
| while (retry--) { |
| /* power off */ |
| gpio_set_value(info->gpio_en, !info->en_polarity); |
| usleep_range(10000, 15000); |
| |
| /* power on */ |
| gpio_set_value(info->gpio_en, info->en_polarity); |
| usleep_range(10000, 15000); |
| |
| /* send reset */ |
| dev_dbg(&info->i2c_dev->dev, "Sending reset cmd\n"); |
| ret = i2c_master_send(info->i2c_dev, rset_cmd, count); |
| if (ret == count) { |
| dev_info(&info->i2c_dev->dev, |
| "nfc_en polarity : active %s\n", |
| (polarity == 0 ? "low" : "high")); |
| goto out; |
| } |
| } |
| } |
| |
| dev_err(&info->i2c_dev->dev, |
| "Could not detect nfc_en polarity, fallback to active high\n"); |
| |
| out: |
| gpio_set_value(info->gpio_en, !info->en_polarity); |
| } |
| |
| static int pn544_hci_enable(struct pn544_hci_info *info, int mode) |
| { |
| pr_info(DRIVER_DESC ": %s\n", __func__); |
| |
| gpio_set_value(info->gpio_fw, 0); |
| gpio_set_value(info->gpio_en, info->en_polarity); |
| usleep_range(10000, 15000); |
| |
| return 0; |
| } |
| |
| static void pn544_hci_disable(struct pn544_hci_info *info) |
| { |
| pr_info(DRIVER_DESC ": %s\n", __func__); |
| |
| gpio_set_value(info->gpio_fw, 0); |
| gpio_set_value(info->gpio_en, !info->en_polarity); |
| usleep_range(10000, 15000); |
| |
| gpio_set_value(info->gpio_en, info->en_polarity); |
| usleep_range(10000, 15000); |
| |
| gpio_set_value(info->gpio_en, !info->en_polarity); |
| usleep_range(10000, 15000); |
| } |
| |
| static int pn544_hci_i2c_write(struct i2c_client *client, u8 *buf, int len) |
| { |
| int r; |
| |
| usleep_range(3000, 6000); |
| |
| r = i2c_master_send(client, buf, len); |
| |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| usleep_range(6000, 10000); |
| r = i2c_master_send(client, buf, len); |
| } |
| |
| if (r >= 0) { |
| if (r != len) |
| return -EREMOTEIO; |
| else |
| return 0; |
| } |
| |
| return r; |
| } |
| |
| static int check_crc(u8 *buf, int buflen) |
| { |
| int len; |
| u16 crc; |
| |
| len = buf[0] + 1; |
| crc = crc_ccitt(0xffff, buf, len - 2); |
| crc = ~crc; |
| |
| if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) { |
| pr_err(PN544_HCI_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n", |
| crc, buf[len - 1], buf[len - 2]); |
| |
| pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__); |
| print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, |
| 16, 2, buf, buflen, false); |
| return -EPERM; |
| } |
| return 0; |
| } |
| |
| /* |
| * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees |
| * that i2c bus will be flushed and that next read will start on a new frame. |
| * returned skb contains only LLC header and payload. |
| * returns: |
| * -EREMOTEIO : i2c read error (fatal) |
| * -EBADMSG : frame was incorrect and discarded |
| * -ENOMEM : cannot allocate skb, frame dropped |
| */ |
| static int pn544_hci_i2c_read(struct i2c_client *client, struct sk_buff **skb) |
| { |
| int r; |
| u8 len; |
| u8 tmp[PN544_HCI_LLC_MAX_SIZE - 1]; |
| |
| r = i2c_master_recv(client, &len, 1); |
| if (r != 1) { |
| dev_err(&client->dev, "cannot read len byte\n"); |
| return -EREMOTEIO; |
| } |
| |
| if ((len < (PN544_HCI_LLC_MIN_SIZE - 1)) || |
| (len > (PN544_HCI_LLC_MAX_SIZE - 1))) { |
| dev_err(&client->dev, "invalid len byte\n"); |
| r = -EBADMSG; |
| goto flush; |
| } |
| |
| *skb = alloc_skb(1 + len, GFP_KERNEL); |
| if (*skb == NULL) { |
| r = -ENOMEM; |
| goto flush; |
| } |
| |
| *skb_put(*skb, 1) = len; |
| |
| r = i2c_master_recv(client, skb_put(*skb, len), len); |
| if (r != len) { |
| kfree_skb(*skb); |
| return -EREMOTEIO; |
| } |
| |
| r = check_crc((*skb)->data, (*skb)->len); |
| if (r != 0) { |
| kfree_skb(*skb); |
| r = -EBADMSG; |
| goto flush; |
| } |
| |
| skb_pull(*skb, 1); |
| skb_trim(*skb, (*skb)->len - 2); |
| |
| usleep_range(3000, 6000); |
| |
| return 0; |
| |
| flush: |
| if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) |
| r = -EREMOTEIO; |
| |
| usleep_range(3000, 6000); |
| |
| return r; |
| } |
| |
| /* |
| * Reads an shdlc frame from the chip. This is not as straightforward as it |
| * seems. There are cases where we could loose the frame start synchronization. |
| * The frame format is len-data-crc, and corruption can occur anywhere while |
| * transiting on i2c bus, such that we could read an invalid len. |
| * In order to recover synchronization with the next frame, we must be sure |
| * to read the real amount of data without using the len byte. We do this by |
| * assuming the following: |
| * - the chip will always present only one single complete frame on the bus |
| * before triggering the interrupt |
| * - the chip will not present a new frame until we have completely read |
| * the previous one (or until we have handled the interrupt). |
| * The tricky case is when we read a corrupted len that is less than the real |
| * len. We must detect this here in order to determine that we need to flush |
| * the bus. This is the reason why we check the crc here. |
| */ |
| static irqreturn_t pn544_hci_irq_thread_fn(int irq, void *dev_id) |
| { |
| struct pn544_hci_info *info = dev_id; |
| struct i2c_client *client; |
| struct sk_buff *skb = NULL; |
| int r; |
| |
| if (!info || irq != info->i2c_dev->irq) { |
| WARN_ON_ONCE(1); |
| return IRQ_NONE; |
| } |
| |
| client = info->i2c_dev; |
| dev_dbg(&client->dev, "IRQ\n"); |
| |
| if (info->hard_fault != 0) |
| return IRQ_HANDLED; |
| |
| r = pn544_hci_i2c_read(client, &skb); |
| if (r == -EREMOTEIO) { |
| info->hard_fault = r; |
| |
| nfc_hci_recv_frame(info->hdev, NULL); |
| |
| return IRQ_HANDLED; |
| } else if ((r == -ENOMEM) || (r == -EBADMSG)) { |
| return IRQ_HANDLED; |
| } |
| |
| nfc_hci_recv_frame(info->hdev, skb); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pn544_hci_open(struct nfc_hci_dev *hdev) |
| { |
| struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); |
| int r = 0; |
| |
| mutex_lock(&info->info_lock); |
| |
| if (info->state != PN544_ST_COLD) { |
| r = -EBUSY; |
| goto out; |
| } |
| |
| r = pn544_hci_enable(info, HCI_MODE); |
| |
| if (r == 0) |
| info->state = PN544_ST_READY; |
| |
| out: |
| mutex_unlock(&info->info_lock); |
| return r; |
| } |
| |
| static void pn544_hci_close(struct nfc_hci_dev *hdev) |
| { |
| struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); |
| |
| mutex_lock(&info->info_lock); |
| |
| if (info->state == PN544_ST_COLD) |
| goto out; |
| |
| pn544_hci_disable(info); |
| |
| info->state = PN544_ST_COLD; |
| |
| out: |
| mutex_unlock(&info->info_lock); |
| } |
| |
| static int pn544_hci_ready(struct nfc_hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| static struct hw_config { |
| u8 adr[2]; |
| u8 value; |
| } hw_config[] = { |
| {{0x9f, 0x9a}, 0x00}, |
| |
| {{0x98, 0x10}, 0xbc}, |
| |
| {{0x9e, 0x71}, 0x00}, |
| |
| {{0x98, 0x09}, 0x00}, |
| |
| {{0x9e, 0xb4}, 0x00}, |
| |
| {{0x9e, 0xd9}, 0xff}, |
| {{0x9e, 0xda}, 0xff}, |
| {{0x9e, 0xdb}, 0x23}, |
| {{0x9e, 0xdc}, 0x21}, |
| {{0x9e, 0xdd}, 0x22}, |
| {{0x9e, 0xde}, 0x24}, |
| |
| {{0x9c, 0x01}, 0x08}, |
| |
| {{0x9e, 0xaa}, 0x01}, |
| |
| {{0x9b, 0xd1}, 0x0d}, |
| {{0x9b, 0xd2}, 0x24}, |
| {{0x9b, 0xd3}, 0x0a}, |
| {{0x9b, 0xd4}, 0x22}, |
| {{0x9b, 0xd5}, 0x08}, |
| {{0x9b, 0xd6}, 0x1e}, |
| {{0x9b, 0xdd}, 0x1c}, |
| |
| {{0x9b, 0x84}, 0x13}, |
| {{0x99, 0x81}, 0x7f}, |
| {{0x99, 0x31}, 0x70}, |
| |
| {{0x98, 0x00}, 0x3f}, |
| |
| {{0x9f, 0x09}, 0x00}, |
| |
| {{0x9f, 0x0a}, 0x05}, |
| |
| {{0x9e, 0xd1}, 0xa1}, |
| {{0x99, 0x23}, 0x00}, |
| |
| {{0x9e, 0x74}, 0x80}, |
| |
| {{0x9f, 0x28}, 0x10}, |
| |
| {{0x9f, 0x35}, 0x14}, |
| |
| {{0x9f, 0x36}, 0x60}, |
| |
| {{0x9c, 0x31}, 0x00}, |
| |
| {{0x9c, 0x32}, 0xc8}, |
| |
| {{0x9c, 0x19}, 0x40}, |
| |
| {{0x9c, 0x1a}, 0x40}, |
| |
| {{0x9c, 0x0c}, 0x00}, |
| |
| {{0x9c, 0x0d}, 0x00}, |
| |
| {{0x9c, 0x12}, 0x00}, |
| |
| {{0x9c, 0x13}, 0x00}, |
| |
| {{0x98, 0xa2}, 0x0e}, |
| |
| {{0x98, 0x93}, 0x40}, |
| |
| {{0x98, 0x7d}, 0x02}, |
| {{0x98, 0x7e}, 0x00}, |
| {{0x9f, 0xc8}, 0x01}, |
| }; |
| struct hw_config *p = hw_config; |
| int count = ARRAY_SIZE(hw_config); |
| struct sk_buff *res_skb; |
| u8 param[4]; |
| int r; |
| |
| param[0] = 0; |
| while (count--) { |
| param[1] = p->adr[0]; |
| param[2] = p->adr[1]; |
| param[3] = p->value; |
| |
| r = nfc_hci_send_cmd(hdev, PN544_SYS_MGMT_GATE, PN544_WRITE, |
| param, 4, &res_skb); |
| if (r < 0) |
| return r; |
| |
| if (res_skb->len != 1) { |
| kfree_skb(res_skb); |
| return -EPROTO; |
| } |
| |
| if (res_skb->data[0] != p->value) { |
| kfree_skb(res_skb); |
| return -EIO; |
| } |
| |
| kfree_skb(res_skb); |
| |
| p++; |
| } |
| |
| param[0] = NFC_HCI_UICC_HOST_ID; |
| r = nfc_hci_set_param(hdev, NFC_HCI_ADMIN_GATE, |
| NFC_HCI_ADMIN_WHITELIST, param, 1); |
| if (r < 0) |
| return r; |
| |
| param[0] = 0x3d; |
| r = nfc_hci_set_param(hdev, PN544_SYS_MGMT_GATE, |
| PN544_SYS_MGMT_INFO_NOTIFICATION, param, 1); |
| if (r < 0) |
| return r; |
| |
| param[0] = 0x0; |
| r = nfc_hci_set_param(hdev, NFC_HCI_RF_READER_A_GATE, |
| PN544_RF_READER_A_AUTO_ACTIVATION, param, 1); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| if (r < 0) |
| return r; |
| |
| param[0] = 0x1; |
| r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, |
| PN544_PL_NFCT_DEACTIVATED, param, 1); |
| if (r < 0) |
| return r; |
| |
| param[0] = 0x0; |
| r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, |
| PN544_PL_RDPHASES, param, 1); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_get_param(hdev, NFC_HCI_ID_MGMT_GATE, |
| PN544_ID_MGMT_FULL_VERSION_SW, &skb); |
| if (r < 0) |
| return r; |
| |
| if (skb->len != FULL_VERSION_LEN) { |
| kfree_skb(skb); |
| return -EINVAL; |
| } |
| |
| print_hex_dump(KERN_DEBUG, "FULL VERSION SOFTWARE INFO: ", |
| DUMP_PREFIX_NONE, 16, 1, |
| skb->data, FULL_VERSION_LEN, false); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static void pn544_hci_add_len_crc(struct sk_buff *skb) |
| { |
| u16 crc; |
| int len; |
| |
| len = skb->len + 2; |
| *skb_push(skb, 1) = len; |
| |
| crc = crc_ccitt(0xffff, skb->data, skb->len); |
| crc = ~crc; |
| *skb_put(skb, 1) = crc & 0xff; |
| *skb_put(skb, 1) = crc >> 8; |
| } |
| |
| static void pn544_hci_remove_len_crc(struct sk_buff *skb) |
| { |
| skb_pull(skb, PN544_FRAME_HEADROOM); |
| skb_trim(skb, PN544_FRAME_TAILROOM); |
| } |
| |
| static int pn544_hci_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); |
| struct i2c_client *client = info->i2c_dev; |
| int r; |
| |
| if (info->hard_fault != 0) |
| return info->hard_fault; |
| |
| pn544_hci_add_len_crc(skb); |
| r = pn544_hci_i2c_write(client, skb->data, skb->len); |
| pn544_hci_remove_len_crc(skb); |
| |
| return r; |
| } |
| |
| static int pn544_hci_start_poll(struct nfc_hci_dev *hdev, |
| u32 im_protocols, u32 tm_protocols) |
| { |
| u8 phases = 0; |
| int r; |
| u8 duration[2]; |
| u8 activated; |
| u8 i_mode = 0x3f; /* Enable all supported modes */ |
| u8 t_mode = 0x0f; |
| u8 t_merge = 0x01; /* Enable merge by default */ |
| |
| pr_info(DRIVER_DESC ": %s protocols 0x%x 0x%x\n", |
| __func__, im_protocols, tm_protocols); |
| |
| r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| if (r < 0) |
| return r; |
| |
| duration[0] = 0x18; |
| duration[1] = 0x6a; |
| r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, |
| PN544_PL_EMULATION, duration, 2); |
| if (r < 0) |
| return r; |
| |
| activated = 0; |
| r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, |
| PN544_PL_NFCT_DEACTIVATED, &activated, 1); |
| if (r < 0) |
| return r; |
| |
| if (im_protocols & (NFC_PROTO_ISO14443_MASK | NFC_PROTO_MIFARE_MASK | |
| NFC_PROTO_JEWEL_MASK)) |
| phases |= 1; /* Type A */ |
| if (im_protocols & NFC_PROTO_FELICA_MASK) { |
| phases |= (1 << 2); /* Type F 212 */ |
| phases |= (1 << 3); /* Type F 424 */ |
| } |
| |
| phases |= (1 << 5); /* NFC active */ |
| |
| r = nfc_hci_set_param(hdev, PN544_POLLING_LOOP_MGMT_GATE, |
| PN544_PL_RDPHASES, &phases, 1); |
| if (r < 0) |
| return r; |
| |
| if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { |
| hdev->gb = nfc_get_local_general_bytes(hdev->ndev, |
| &hdev->gb_len); |
| pr_debug("generate local bytes %p", hdev->gb); |
| if (hdev->gb == NULL || hdev->gb_len == 0) { |
| im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; |
| tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; |
| } |
| } |
| |
| if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { |
| r = nfc_hci_send_event(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_set_param(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| PN544_DEP_MODE, &i_mode, 1); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_set_param(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| PN544_DEP_ATR_REQ, hdev->gb, hdev->gb_len); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_send_event(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| NFC_HCI_EVT_READER_REQUESTED, NULL, 0); |
| if (r < 0) |
| nfc_hci_send_event(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| } |
| |
| if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { |
| r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, |
| PN544_DEP_MODE, &t_mode, 1); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, |
| PN544_DEP_ATR_RES, hdev->gb, hdev->gb_len); |
| if (r < 0) |
| return r; |
| |
| r = nfc_hci_set_param(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, |
| PN544_DEP_MERGE, &t_merge, 1); |
| if (r < 0) |
| return r; |
| } |
| |
| r = nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, |
| NFC_HCI_EVT_READER_REQUESTED, NULL, 0); |
| if (r < 0) |
| nfc_hci_send_event(hdev, NFC_HCI_RF_READER_A_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| |
| return r; |
| } |
| |
| static int pn544_hci_dep_link_up(struct nfc_hci_dev *hdev, |
| struct nfc_target *target, u8 comm_mode, |
| u8 *gb, size_t gb_len) |
| { |
| struct sk_buff *rgb_skb = NULL; |
| int r; |
| |
| r = nfc_hci_get_param(hdev, target->hci_reader_gate, |
| PN544_DEP_ATR_RES, &rgb_skb); |
| if (r < 0) |
| return r; |
| |
| if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { |
| r = -EPROTO; |
| goto exit; |
| } |
| print_hex_dump(KERN_DEBUG, "remote gb: ", DUMP_PREFIX_OFFSET, |
| 16, 1, rgb_skb->data, rgb_skb->len, true); |
| |
| r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, |
| rgb_skb->len); |
| |
| if (r == 0) |
| r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, |
| NFC_RF_INITIATOR); |
| exit: |
| kfree_skb(rgb_skb); |
| return r; |
| } |
| |
| static int pn544_hci_dep_link_down(struct nfc_hci_dev *hdev) |
| { |
| |
| return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| } |
| |
| static int pn544_hci_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, |
| struct nfc_target *target) |
| { |
| switch (gate) { |
| case PN544_RF_READER_F_GATE: |
| target->supported_protocols = NFC_PROTO_FELICA_MASK; |
| break; |
| case PN544_RF_READER_JEWEL_GATE: |
| target->supported_protocols = NFC_PROTO_JEWEL_MASK; |
| target->sens_res = 0x0c00; |
| break; |
| case PN544_RF_READER_NFCIP1_INITIATOR_GATE: |
| target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| break; |
| default: |
| return -EPROTO; |
| } |
| |
| return 0; |
| } |
| |
| static int pn544_hci_complete_target_discovered(struct nfc_hci_dev *hdev, |
| u8 gate, |
| struct nfc_target *target) |
| { |
| struct sk_buff *uid_skb; |
| int r = 0; |
| |
| if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) |
| return r; |
| |
| if (target->supported_protocols & NFC_PROTO_NFC_DEP_MASK) { |
| r = nfc_hci_send_cmd(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| PN544_HCI_CMD_CONTINUE_ACTIVATION, NULL, 0, NULL); |
| if (r < 0) |
| return r; |
| |
| target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE; |
| } else if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) { |
| if (target->nfcid1_len != 4 && target->nfcid1_len != 7 && |
| target->nfcid1_len != 10) |
| return -EPROTO; |
| |
| r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, |
| PN544_RF_READER_CMD_ACTIVATE_NEXT, |
| target->nfcid1, target->nfcid1_len, NULL); |
| } else if (target->supported_protocols & NFC_PROTO_FELICA_MASK) { |
| r = nfc_hci_get_param(hdev, PN544_RF_READER_F_GATE, |
| PN544_FELICA_ID, &uid_skb); |
| if (r < 0) |
| return r; |
| |
| if (uid_skb->len != 8) { |
| kfree_skb(uid_skb); |
| return -EPROTO; |
| } |
| |
| r = nfc_hci_send_cmd(hdev, PN544_RF_READER_F_GATE, |
| PN544_RF_READER_CMD_ACTIVATE_NEXT, |
| uid_skb->data, uid_skb->len, NULL); |
| kfree_skb(uid_skb); |
| |
| r = nfc_hci_send_cmd(hdev, |
| PN544_RF_READER_NFCIP1_INITIATOR_GATE, |
| PN544_HCI_CMD_CONTINUE_ACTIVATION, |
| NULL, 0, NULL); |
| if (r < 0) |
| return r; |
| |
| target->hci_reader_gate = PN544_RF_READER_NFCIP1_INITIATOR_GATE; |
| target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; |
| } else if (target->supported_protocols & NFC_PROTO_ISO14443_MASK) { |
| /* |
| * TODO: maybe other ISO 14443 require some kind of continue |
| * activation, but for now we've seen only this one below. |
| */ |
| if (target->sens_res == 0x4403) /* Type 4 Mifare DESFire */ |
| r = nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, |
| PN544_RF_READER_A_CMD_CONTINUE_ACTIVATION, |
| NULL, 0, NULL); |
| } |
| |
| return r; |
| } |
| |
| #define PN544_CB_TYPE_READER_F 1 |
| |
| static void pn544_hci_data_exchange_cb(void *context, struct sk_buff *skb, |
| int err) |
| { |
| struct pn544_hci_info *info = context; |
| |
| switch (info->async_cb_type) { |
| case PN544_CB_TYPE_READER_F: |
| if (err == 0) |
| skb_pull(skb, 1); |
| info->async_cb(info->async_cb_context, skb, err); |
| break; |
| default: |
| if (err == 0) |
| kfree_skb(skb); |
| break; |
| } |
| } |
| |
| #define MIFARE_CMD_AUTH_KEY_A 0x60 |
| #define MIFARE_CMD_AUTH_KEY_B 0x61 |
| #define MIFARE_CMD_HEADER 2 |
| #define MIFARE_UID_LEN 4 |
| #define MIFARE_KEY_LEN 6 |
| #define MIFARE_CMD_LEN 12 |
| /* |
| * Returns: |
| * <= 0: driver handled the data exchange |
| * 1: driver doesn't especially handle, please do standard processing |
| */ |
| static int pn544_hci_data_exchange(struct nfc_hci_dev *hdev, |
| struct nfc_target *target, |
| struct sk_buff *skb, data_exchange_cb_t cb, |
| void *cb_context) |
| { |
| struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); |
| |
| pr_info(DRIVER_DESC ": %s for gate=%d\n", __func__, |
| target->hci_reader_gate); |
| |
| switch (target->hci_reader_gate) { |
| case NFC_HCI_RF_READER_A_GATE: |
| if (target->supported_protocols & NFC_PROTO_MIFARE_MASK) { |
| /* |
| * It seems that pn544 is inverting key and UID for |
| * MIFARE authentication commands. |
| */ |
| if (skb->len == MIFARE_CMD_LEN && |
| (skb->data[0] == MIFARE_CMD_AUTH_KEY_A || |
| skb->data[0] == MIFARE_CMD_AUTH_KEY_B)) { |
| u8 uid[MIFARE_UID_LEN]; |
| u8 *data = skb->data + MIFARE_CMD_HEADER; |
| |
| memcpy(uid, data + MIFARE_KEY_LEN, |
| MIFARE_UID_LEN); |
| memmove(data + MIFARE_UID_LEN, data, |
| MIFARE_KEY_LEN); |
| memcpy(data, uid, MIFARE_UID_LEN); |
| } |
| |
| return nfc_hci_send_cmd_async(hdev, |
| target->hci_reader_gate, |
| PN544_MIFARE_CMD, |
| skb->data, skb->len, |
| cb, cb_context); |
| } else |
| return 1; |
| case PN544_RF_READER_F_GATE: |
| *skb_push(skb, 1) = 0; |
| *skb_push(skb, 1) = 0; |
| |
| info->async_cb_type = PN544_CB_TYPE_READER_F; |
| info->async_cb = cb; |
| info->async_cb_context = cb_context; |
| |
| return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, |
| PN544_FELICA_RAW, skb->data, |
| skb->len, |
| pn544_hci_data_exchange_cb, info); |
| case PN544_RF_READER_JEWEL_GATE: |
| return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, |
| PN544_JEWEL_RAW_CMD, skb->data, |
| skb->len, cb, cb_context); |
| default: |
| return 1; |
| } |
| } |
| |
| static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, |
| struct nfc_target *target) |
| { |
| return nfc_hci_send_cmd(hdev, target->hci_reader_gate, |
| PN544_RF_READER_CMD_PRESENCE_CHECK, |
| NULL, 0, NULL); |
| } |
| |
| void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, |
| struct sk_buff *skb) |
| { |
| struct sk_buff *rgb_skb = NULL; |
| int r = 0; |
| |
| pr_debug("hci event %d", event); |
| switch (event) { |
| case PN544_HCI_EVT_ACTIVATED: |
| if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) |
| nfc_hci_target_discovered(hdev, gate); |
| else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { |
| r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, |
| &rgb_skb); |
| |
| if (r < 0) |
| goto exit; |
| |
| nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, |
| NFC_COMM_PASSIVE, rgb_skb->data, |
| rgb_skb->len); |
| |
| kfree_skb(rgb_skb); |
| } |
| |
| break; |
| case PN544_HCI_EVT_DEACTIVATED: |
| nfc_hci_send_event(hdev, gate, |
| NFC_HCI_EVT_END_OPERATION, NULL, 0); |
| break; |
| default: |
| break; |
| } |
| |
| exit: |
| kfree_skb(skb); |
| } |
| |
| static struct nfc_hci_ops pn544_hci_ops = { |
| .open = pn544_hci_open, |
| .close = pn544_hci_close, |
| .hci_ready = pn544_hci_ready, |
| .xmit = pn544_hci_xmit, |
| .start_poll = pn544_hci_start_poll, |
| .dep_link_up = pn544_hci_dep_link_up, |
| .dep_link_down = pn544_hci_dep_link_down, |
| .target_from_gate = pn544_hci_target_from_gate, |
| .complete_target_discovered = pn544_hci_complete_target_discovered, |
| .data_exchange = pn544_hci_data_exchange, |
| .check_presence = pn544_hci_check_presence, |
| .event_received = pn544_hci_event_received, |
| }; |
| |
| static int __devinit pn544_hci_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pn544_hci_info *info; |
| struct pn544_nfc_platform_data *pdata; |
| int r = 0; |
| u32 protocols; |
| struct nfc_hci_init_data init_data; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| dev_dbg(&client->dev, "IRQ: %d\n", client->irq); |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "Need I2C_FUNC_I2C\n"); |
| return -ENODEV; |
| } |
| |
| info = kzalloc(sizeof(struct pn544_hci_info), GFP_KERNEL); |
| if (!info) { |
| dev_err(&client->dev, |
| "Cannot allocate memory for pn544_hci_info.\n"); |
| r = -ENOMEM; |
| goto err_info_alloc; |
| } |
| |
| info->i2c_dev = client; |
| info->state = PN544_ST_COLD; |
| mutex_init(&info->info_lock); |
| i2c_set_clientdata(client, info); |
| |
| pdata = client->dev.platform_data; |
| if (pdata == NULL) { |
| dev_err(&client->dev, "No platform data\n"); |
| r = -EINVAL; |
| goto err_pdata; |
| } |
| |
| if (pdata->request_resources == NULL) { |
| dev_err(&client->dev, "request_resources() missing\n"); |
| r = -EINVAL; |
| goto err_pdata; |
| } |
| |
| r = pdata->request_resources(client); |
| if (r) { |
| dev_err(&client->dev, "Cannot get platform resources\n"); |
| goto err_pdata; |
| } |
| |
| info->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE); |
| info->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET); |
| info->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ); |
| |
| pn544_hci_platform_init(info); |
| |
| r = request_threaded_irq(client->irq, NULL, pn544_hci_irq_thread_fn, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| PN544_HCI_DRIVER_NAME, info); |
| if (r < 0) { |
| dev_err(&client->dev, "Unable to register IRQ handler\n"); |
| goto err_rti; |
| } |
| |
| init_data.gate_count = ARRAY_SIZE(pn544_gates); |
| |
| memcpy(init_data.gates, pn544_gates, sizeof(pn544_gates)); |
| |
| /* |
| * TODO: Session id must include the driver name + some bus addr |
| * persistent info to discriminate 2 identical chips |
| */ |
| strcpy(init_data.session_id, "ID544HCI"); |
| |
| protocols = NFC_PROTO_JEWEL_MASK | |
| NFC_PROTO_MIFARE_MASK | |
| NFC_PROTO_FELICA_MASK | |
| NFC_PROTO_ISO14443_MASK | |
| NFC_PROTO_ISO14443_B_MASK | |
| NFC_PROTO_NFC_DEP_MASK; |
| |
| info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, |
| protocols, LLC_SHDLC_NAME, |
| PN544_FRAME_HEADROOM + |
| PN544_CMDS_HEADROOM, |
| PN544_FRAME_TAILROOM, |
| PN544_HCI_LLC_MAX_PAYLOAD); |
| if (!info->hdev) { |
| dev_err(&client->dev, "Cannot allocate nfc hdev.\n"); |
| r = -ENOMEM; |
| goto err_alloc_hdev; |
| } |
| |
| nfc_hci_set_clientdata(info->hdev, info); |
| |
| r = nfc_hci_register_device(info->hdev); |
| if (r) |
| goto err_regdev; |
| |
| return 0; |
| |
| err_regdev: |
| nfc_hci_free_device(info->hdev); |
| |
| err_alloc_hdev: |
| free_irq(client->irq, info); |
| |
| err_rti: |
| if (pdata->free_resources != NULL) |
| pdata->free_resources(); |
| |
| err_pdata: |
| kfree(info); |
| |
| err_info_alloc: |
| return r; |
| } |
| |
| static __devexit int pn544_hci_remove(struct i2c_client *client) |
| { |
| struct pn544_hci_info *info = i2c_get_clientdata(client); |
| struct pn544_nfc_platform_data *pdata = client->dev.platform_data; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| nfc_hci_free_device(info->hdev); |
| |
| if (info->state != PN544_ST_COLD) { |
| if (pdata->disable) |
| pdata->disable(); |
| } |
| |
| free_irq(client->irq, info); |
| if (pdata->free_resources) |
| pdata->free_resources(); |
| |
| kfree(info); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver pn544_hci_driver = { |
| .driver = { |
| .name = PN544_HCI_DRIVER_NAME, |
| }, |
| .probe = pn544_hci_probe, |
| .id_table = pn544_hci_id_table, |
| .remove = __devexit_p(pn544_hci_remove), |
| }; |
| |
| static int __init pn544_hci_init(void) |
| { |
| int r; |
| |
| pr_debug(DRIVER_DESC ": %s\n", __func__); |
| |
| r = i2c_add_driver(&pn544_hci_driver); |
| if (r) { |
| pr_err(PN544_HCI_DRIVER_NAME ": driver registration failed\n"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit pn544_hci_exit(void) |
| { |
| i2c_del_driver(&pn544_hci_driver); |
| } |
| |
| module_init(pn544_hci_init); |
| module_exit(pn544_hci_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |