drivers/usb/storage/usb.h - kernel/msm-4.19 - Gitiles

 /* Driver for USB Mass Storage compliant devices
  * Main Header File
  *
  * $Id: usb.h,v 1.21 2002/04/21 02:57:59 mdharm Exp $
  *
  * Current development and maintenance by:
  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  *
  * This driver is based on the 'USB Mass Storage Class' document. This
  * describes in detail the protocol used to communicate with such
  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  * mind when they created this document.  The commands are all very
  * similar to commands in the SCSI-II and ATAPI specifications.
  *
  * It is important to note that in a number of cases this class
  * exhibits class-specific exemptions from the USB specification.
  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  * that they are used to communicate wait, failed and OK on commands.
  *
  * Also, for certain devices, the interrupt endpoint is used to convey
  * status of a command.
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
  * later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #ifndef _USB_H_
 #define _USB_H_

 #include <linux/usb.h>
 #include <linux/usb_usual.h>
 #include <linux/blkdev.h>
 #include <linux/smp_lock.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <scsi/scsi_host.h>

 struct us_data;
 struct scsi_cmnd;

 /*
  * Unusual device list definitions
  */

 struct us_unusual_dev {
 	const char* vendorName;
 	const char* productName;
 	__u8  useProtocol;
 	__u8  useTransport;
 	int (*initFunction)(struct us_data *);
 };


 /* Dynamic flag definitions: used in set_bit() etc. */
 #define US_FLIDX_URB_ACTIVE	18  /* 0x00040000  current_urb is in use  */
 #define US_FLIDX_SG_ACTIVE	19  /* 0x00080000  current_sg is in use   */
 #define US_FLIDX_ABORTING	20  /* 0x00100000  abort is in progress   */
 #define US_FLIDX_DISCONNECTING	21  /* 0x00200000  disconnect in progress */
 #define ABORTING_OR_DISCONNECTING	((1UL << US_FLIDX_ABORTING) | \
 					 (1UL << US_FLIDX_DISCONNECTING))
 #define US_FLIDX_RESETTING	22  /* 0x00400000  device reset in progress */
 #define US_FLIDX_TIMED_OUT	23  /* 0x00800000  SCSI midlayer timed out  */


 #define USB_STOR_STRING_LEN 32

 /*
  * We provide a DMA-mapped I/O buffer for use with small USB transfers.
  * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
  * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
  * size we'll allocate.
  */

 #define US_IOBUF_SIZE		64	/* Size of the DMA-mapped I/O buffer */
 #define US_SENSE_SIZE		18	/* Size of the autosense data buffer */

 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
 typedef int (*trans_reset)(struct us_data*);
 typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
 typedef void (*extra_data_destructor)(void *);	/* extra data destructor */
 typedef void (*pm_hook)(struct us_data *, int);	/* power management hook */

 #define US_SUSPEND	0
 #define US_RESUME	1

 /* we allocate one of these for every device that we remember */
 struct us_data {
 	/* The device we're working with
 	 * It's important to note:
 	 *    (o) you must hold dev_mutex to change pusb_dev
 	 */
 	struct mutex		dev_mutex;	 /* protect pusb_dev */
 	struct usb_device	*pusb_dev;	 /* this usb_device */
 	struct usb_interface	*pusb_intf;	 /* this interface */
 	struct us_unusual_dev   *unusual_dev;	 /* device-filter entry     */
 	unsigned long		flags;		 /* from filter initially */
 	unsigned int		send_bulk_pipe;	 /* cached pipe values */
 	unsigned int		recv_bulk_pipe;
 	unsigned int		send_ctrl_pipe;
 	unsigned int		recv_ctrl_pipe;
 	unsigned int		recv_intr_pipe;

 	/* information about the device */
 	char			*transport_name;
 	char			*protocol_name;
 	__le32			bcs_signature;
 	u8			subclass;
 	u8			protocol;
 	u8			max_lun;

 	u8			ifnum;		 /* interface number   */
 	u8			ep_bInterval;	 /* interrupt interval */

 	/* function pointers for this device */
 	trans_cmnd		transport;	 /* transport function	   */
 	trans_reset		transport_reset; /* transport device reset */
 	proto_cmnd		proto_handler;	 /* protocol handler	   */

 	/* SCSI interfaces */
 	struct scsi_cmnd	*srb;		 /* current srb		*/
 	unsigned int		tag;		 /* current dCBWTag	*/

 	/* control and bulk communications data */
 	struct urb		*current_urb;	 /* USB requests	 */
 	struct usb_ctrlrequest	*cr;		 /* control requests	 */
 	struct usb_sg_request	current_sg;	 /* scatter-gather req.  */
 	unsigned char		*iobuf;		 /* I/O buffer		 */
 	unsigned char		*sensebuf;	 /* sense data buffer	 */
 	dma_addr_t		cr_dma;		 /* buffer DMA addresses */
 	dma_addr_t		iobuf_dma;

 	/* mutual exclusion and synchronization structures */
 	struct semaphore	sema;		 /* to sleep thread on	    */
 	struct completion	notify;		 /* thread begin/end	    */
 	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */

 	/* subdriver information */
 	void			*extra;		 /* Any extra data          */
 	extra_data_destructor	extra_destructor;/* extra data destructor   */
 #ifdef CONFIG_PM
 	pm_hook			suspend_resume_hook;
 #endif
 };

 /* Convert between us_data and the corresponding Scsi_Host */
 static struct Scsi_Host inline *us_to_host(struct us_data *us) {
 	return container_of((void *) us, struct Scsi_Host, hostdata);
 }
 static struct us_data inline *host_to_us(struct Scsi_Host *host) {
 	return (struct us_data *) host->hostdata;
 }

 /* Function to fill an inquiry response. See usb.c for details */
 extern void fill_inquiry_response(struct us_data *us,
 	unsigned char *data, unsigned int data_len);

 /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
  * single queue element srb for write access */
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)


 /* Vendor ID list for devices that require special handling */
 #define USB_VENDOR_ID_GENESYS		0x05e3	/* Genesys Logic */

 #endif
	/* Driver for USB Mass Storage compliant devices
	* Main Header File
	*
	* $Id: usb.h,v 1.21 2002/04/21 02:57:59 mdharm Exp $
	*
	* Current development and maintenance by:
	* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
	*
	* Initial work by:
	* (c) 1999 Michael Gee (michael@linuxspecific.com)
	*
	* This driver is based on the 'USB Mass Storage Class' document. This
	* describes in detail the protocol used to communicate with such
	* devices. Clearly, the designers had SCSI and ATAPI commands in
	* mind when they created this document. The commands are all very
	* similar to commands in the SCSI-II and ATAPI specifications.
	*
	* It is important to note that in a number of cases this class
	* exhibits class-specific exemptions from the USB specification.
	* Notably the usage of NAK, STALL and ACK differs from the norm, in
	* that they are used to communicate wait, failed and OK on commands.
	*
	* Also, for certain devices, the interrupt endpoint is used to convey
	* status of a command.
	*
	* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
	* information about this driver.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2, or (at your option) any
	* later version.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#ifndef _USB_H_
	#define _USB_H_

	#include <linux/usb.h>
	#include <linux/usb_usual.h>
	#include <linux/blkdev.h>
	#include <linux/smp_lock.h>
	#include <linux/completion.h>
	#include <linux/mutex.h>
	#include <scsi/scsi_host.h>

	struct us_data;
	struct scsi_cmnd;

	/*
	* Unusual device list definitions
	*/

	struct us_unusual_dev {
	const char* vendorName;
	const char* productName;
	__u8 useProtocol;
	__u8 useTransport;
	int (initFunction)(struct us_data );
	};


	/* Dynamic flag definitions: used in set_bit() etc. */
	#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
	#define US_FLIDX_SG_ACTIVE 19 /* 0x00080000 current_sg is in use */
	#define US_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
	#define US_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
	#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) \| \
	(1UL << US_FLIDX_DISCONNECTING))
	#define US_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
	#define US_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI midlayer timed out */


	#define USB_STOR_STRING_LEN 32

	/*
	* We provide a DMA-mapped I/O buffer for use with small USB transfers.
	* It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
	* 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the
	* size we'll allocate.
	*/

	#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */
	#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */

	typedef int (trans_cmnd)(struct scsi_cmnd , struct us_data*);
	typedef int (trans_reset)(struct us_data);
	typedef void (proto_cmnd)(struct scsi_cmnd, struct us_data*);
	typedef void (extra_data_destructor)(void ); /* extra data destructor */
	typedef void (pm_hook)(struct us_data , int); /* power management hook */

	#define US_SUSPEND 0
	#define US_RESUME 1

	/* we allocate one of these for every device that we remember */
	struct us_data {
	/* The device we're working with
	* It's important to note:
	* (o) you must hold dev_mutex to change pusb_dev
	*/
	struct mutex dev_mutex; /* protect pusb_dev */
	struct usb_device pusb_dev; / this usb_device */
	struct usb_interface pusb_intf; / this interface */
	struct us_unusual_dev unusual_dev; / device-filter entry */
	unsigned long flags; /* from filter initially */
	unsigned int send_bulk_pipe; /* cached pipe values */
	unsigned int recv_bulk_pipe;
	unsigned int send_ctrl_pipe;
	unsigned int recv_ctrl_pipe;
	unsigned int recv_intr_pipe;

	/* information about the device */
	char *transport_name;
	char *protocol_name;
	__le32 bcs_signature;
	u8 subclass;
	u8 protocol;
	u8 max_lun;

	u8 ifnum; /* interface number */
	u8 ep_bInterval; /* interrupt interval */

	/* function pointers for this device */
	trans_cmnd transport; /* transport function */
	trans_reset transport_reset; /* transport device reset */
	proto_cmnd proto_handler; /* protocol handler */

	/* SCSI interfaces */
	struct scsi_cmnd srb; / current srb */
	unsigned int tag; /* current dCBWTag */

	/* control and bulk communications data */
	struct urb current_urb; / USB requests */
	struct usb_ctrlrequest cr; / control requests */
	struct usb_sg_request current_sg; /* scatter-gather req. */
	unsigned char iobuf; / I/O buffer */
	unsigned char sensebuf; / sense data buffer */
	dma_addr_t cr_dma; /* buffer DMA addresses */
	dma_addr_t iobuf_dma;

	/* mutual exclusion and synchronization structures */
	struct semaphore sema; /* to sleep thread on */
	struct completion notify; /* thread begin/end */
	wait_queue_head_t delay_wait; /* wait during scan, reset */

	/* subdriver information */
	void extra; / Any extra data */
	extra_data_destructor extra_destructor;/* extra data destructor */
	#ifdef CONFIG_PM
	pm_hook suspend_resume_hook;
	#endif
	};

	/* Convert between us_data and the corresponding Scsi_Host */
	static struct Scsi_Host inline us_to_host(struct us_data us) {
	return container_of((void *) us, struct Scsi_Host, hostdata);
	}
	static struct us_data inline host_to_us(struct Scsi_Host host) {
	return (struct us_data *) host->hostdata;
	}

	/* Function to fill an inquiry response. See usb.c for details */
	extern void fill_inquiry_response(struct us_data *us,
	unsigned char *data, unsigned int data_len);

	/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
	* single queue element srb for write access */
	#define scsi_unlock(host) spin_unlock_irq(host->host_lock)
	#define scsi_lock(host) spin_lock_irq(host->host_lock)


	/* Vendor ID list for devices that require special handling */
	#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */

	#endif