drivers/usb/serial/console.c - kernel/msm-4.19 - Gitiles

 /*
  * USB Serial Console driver
  *
  * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
  * Thanks to Randy Dunlap for the original version of this code.
  *
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>

 static int debug;

 struct usbcons_info {
 	int			magic;
 	int			break_flag;
 	struct usb_serial_port	*port;
 };

 static struct usbcons_info usbcons_info;
 static struct console usbcons;

 /*
  * ------------------------------------------------------------
  * USB Serial console driver
  *
  * Much of the code here is copied from drivers/char/serial.c
  * and implements a phony serial console in the same way that
  * serial.c does so that in case some software queries it,
  * it will get the same results.
  *
  * Things that are different from the way the serial port code
  * does things, is that we call the lower level usb-serial
  * driver code to initialize the device, and we set the initial
  * console speeds based on the command line arguments.
  * ------------------------------------------------------------
  */


 /*
  * The parsing of the command line works exactly like the
  * serial.c code, except that the specifier is "ttyUSB" instead
  * of "ttyS".
  */
 static int usb_console_setup(struct console *co, char *options)
 {
 	struct usbcons_info *info = &usbcons_info;
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int doflow = 0;
 	int cflag = CREAD | HUPCL | CLOCAL;
 	char *s;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
 	int retval = 0;
 	struct tty_struct *tty = NULL;
 	struct ktermios *termios = NULL, dummy;

 	dbg("%s", __func__);

 	if (options) {
 		baud = simple_strtoul(options, NULL, 10);
 		s = options;
 		while (*s >= '0' && *s <= '9')
 			s++;
 		if (*s)
 			parity = *s++;
 		if (*s)
 			bits   = *s++ - '0';
 		if (*s)
 			doflow = (*s++ == 'r');
 	}

 	/* Sane default */
 	if (baud == 0)
 		baud = 9600;

 	switch (bits) {
 	case 7:
 		cflag |= CS7;
 		break;
 	default:
 	case 8:
 		cflag |= CS8;
 		break;
 	}
 	switch (parity) {
 	case 'o': case 'O':
 		cflag |= PARODD;
 		break;
 	case 'e': case 'E':
 		cflag |= PARENB;
 		break;
 	}
 	co->cflag = cflag;

 	/*
 	 * no need to check the index here: if the index is wrong, console
 	 * code won't call us
 	 */
 	serial = usb_serial_get_by_index(co->index);
 	if (serial == NULL) {
 		/* no device is connected yet, sorry :( */
 		err("No USB device connected to ttyUSB%i", co->index);
 		return -ENODEV;
 	}

 	port = serial->port[0];
 	tty_port_tty_set(&port->port, NULL);

 	info->port = port;

 	++port->port.count;
 	if (port->port.count == 1) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
 			 * the termios structure, then later call set_termios to
 			 * configure according to command line arguments
 			 */
 			tty = kzalloc(sizeof(*tty), GFP_KERNEL);
 			if (!tty) {
 				retval = -ENOMEM;
 				err("no more memory");
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
 			termios = kzalloc(sizeof(*termios), GFP_KERNEL);
 			if (!termios) {
 				retval = -ENOMEM;
 				err("no more memory");
 				goto free_tty;
 			}
 			memset(&dummy, 0, sizeof(struct ktermios));
 			tty->termios = termios;
 			tty_port_tty_set(&port->port, tty);
 		}

 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
 			retval = serial->type->open(NULL, port, NULL);
 		else
 			retval = usb_serial_generic_open(NULL, port, NULL);

 		if (retval) {
 			err("could not open USB console port");
 			goto free_termios;
 		}

 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
 			tty_termios_encode_baud_rate(termios, baud, baud);
 			serial->type->set_termios(tty, port, &dummy);

 			tty_port_tty_set(&port->port, NULL);
 			kfree(termios);
 			kfree(tty);
 		}
 	}

 	port->console = 1;
 	retval = 0;

 out:
 	return retval;
 free_termios:
 	kfree(termios);
 	tty_port_tty_set(&port->port, NULL);
 free_tty:
 	kfree(tty);
 reset_open_count:
 	port->port.count = 0;
 goto out;
 }

 static void usb_console_write(struct console *co,
 					const char *buf, unsigned count)
 {
 	static struct usbcons_info *info = &usbcons_info;
 	struct usb_serial_port *port = info->port;
 	struct usb_serial *serial;
 	int retval = -ENODEV;

 	if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
 		return;
 	serial = port->serial;

 	if (count == 0)
 		return;

 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);

 	if (!port->port.count) {
 		dbg("%s - port not opened", __func__);
 		return;
 	}

 	while (count) {
 		unsigned int i;
 		unsigned int lf;
 		/* search for LF so we can insert CR if necessary */
 		for (i = 0, lf = 0 ; i < count ; i++) {
 			if (*(buf + i) == 10) {
 				lf = 1;
 				i++;
 				break;
 			}
 		}
 		/* pass on to the driver specific version of this function if
 		   it is available */
 		if (serial->type->write)
 			retval = serial->type->write(NULL, port, buf, i);
 		else
 			retval = usb_serial_generic_write(NULL, port, buf, i);
 		dbg("%s - return value : %d", __func__, retval);
 		if (lf) {
 			/* append CR after LF */
 			unsigned char cr = 13;
 			if (serial->type->write)
 				retval = serial->type->write(NULL,
 								port, &cr, 1);
 			else
 				retval = usb_serial_generic_write(NULL,
 								port, &cr, 1);
 			dbg("%s - return value : %d", __func__, retval);
 		}
 		buf += i;
 		count -= i;
 	}
 }

 static struct console usbcons = {
 	.name =		"ttyUSB",
 	.write =	usb_console_write,
 	.setup =	usb_console_setup,
 	.flags =	CON_PRINTBUFFER,
 	.index =	-1,
 };

 void usb_serial_console_disconnect(struct usb_serial *serial)
 {
 	if (serial && serial->port && serial->port[0]
 				&& serial->port[0] == usbcons_info.port) {
 		usb_serial_console_exit();
 		usb_serial_put(serial);
 	}
 }

 void usb_serial_console_init(int serial_debug, int minor)
 {
 	debug = serial_debug;

 	if (minor == 0) {
 		/*
 		 * Call register_console() if this is the first device plugged
 		 * in.  If we call it earlier, then the callback to
 		 * console_setup() will fail, as there is not a device seen by
 		 * the USB subsystem yet.
 		 */
 		/*
 		 * Register console.
 		 * NOTES:
 		 * console_setup() is called (back) immediately (from
 		 * register_console). console_write() is called immediately
 		 * from register_console iff CON_PRINTBUFFER is set in flags.
 		 */
 		dbg("registering the USB serial console.");
 		register_console(&usbcons);
 	}
 }

 void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
 		if (usbcons_info.port->port.count)
 			usbcons_info.port->port.count--;
 		usbcons_info.port = NULL;
 	}
 }
	/*
	* USB Serial Console driver
	*
	* Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License version
	* 2 as published by the Free Software Foundation.
	*
	* Thanks to Randy Dunlap for the original version of this code.
	*
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/tty.h>
	#include <linux/console.h>
	#include <linux/usb.h>
	#include <linux/usb/serial.h>

	static int debug;

	struct usbcons_info {
	int magic;
	int break_flag;
	struct usb_serial_port *port;
	};

	static struct usbcons_info usbcons_info;
	static struct console usbcons;

	/*
	* ------------------------------------------------------------
	* USB Serial console driver
	*
	* Much of the code here is copied from drivers/char/serial.c
	* and implements a phony serial console in the same way that
	* serial.c does so that in case some software queries it,
	* it will get the same results.
	*
	* Things that are different from the way the serial port code
	* does things, is that we call the lower level usb-serial
	* driver code to initialize the device, and we set the initial
	* console speeds based on the command line arguments.
	* ------------------------------------------------------------
	*/


	/*
	* The parsing of the command line works exactly like the
	* serial.c code, except that the specifier is "ttyUSB" instead
	* of "ttyS".
	*/
	static int usb_console_setup(struct console co, char options)
	{
	struct usbcons_info *info = &usbcons_info;
	int baud = 9600;
	int bits = 8;
	int parity = 'n';
	int doflow = 0;
	int cflag = CREAD \| HUPCL \| CLOCAL;
	char *s;
	struct usb_serial *serial;
	struct usb_serial_port *port;
	int retval = 0;
	struct tty_struct *tty = NULL;
	struct ktermios *termios = NULL, dummy;

	dbg("%s", __func__);

	if (options) {
	baud = simple_strtoul(options, NULL, 10);
	s = options;
	while (s >= '0' && s <= '9')
	s++;
	if (*s)
	parity = *s++;
	if (*s)
	bits = *s++ - '0';
	if (*s)
	doflow = (*s++ == 'r');
	}

	/* Sane default */
	if (baud == 0)
	baud = 9600;

	switch (bits) {
	case 7:
	cflag \|= CS7;
	break;
	default:
	case 8:
	cflag \|= CS8;
	break;
	}
	switch (parity) {
	case 'o': case 'O':
	cflag \|= PARODD;
	break;
	case 'e': case 'E':
	cflag \|= PARENB;
	break;
	}
	co->cflag = cflag;

	/*
	* no need to check the index here: if the index is wrong, console
	* code won't call us
	*/
	serial = usb_serial_get_by_index(co->index);
	if (serial == NULL) {
	/* no device is connected yet, sorry :( */
	err("No USB device connected to ttyUSB%i", co->index);
	return -ENODEV;
	}

	port = serial->port[0];
	tty_port_tty_set(&port->port, NULL);

	info->port = port;

	++port->port.count;
	if (port->port.count == 1) {
	if (serial->type->set_termios) {
	/*
	* allocate a fake tty so the driver can initialize
	* the termios structure, then later call set_termios to
	* configure according to command line arguments
	*/
	tty = kzalloc(sizeof(*tty), GFP_KERNEL);
	if (!tty) {
	retval = -ENOMEM;
	err("no more memory");
	goto reset_open_count;
	}
	kref_init(&tty->kref);
	termios = kzalloc(sizeof(*termios), GFP_KERNEL);
	if (!termios) {
	retval = -ENOMEM;
	err("no more memory");
	goto free_tty;
	}
	memset(&dummy, 0, sizeof(struct ktermios));
	tty->termios = termios;
	tty_port_tty_set(&port->port, tty);
	}

	/* only call the device specific open if this
	* is the first time the port is opened */
	if (serial->type->open)
	retval = serial->type->open(NULL, port, NULL);
	else
	retval = usb_serial_generic_open(NULL, port, NULL);

	if (retval) {
	err("could not open USB console port");
	goto free_termios;
	}

	if (serial->type->set_termios) {
	termios->c_cflag = cflag;
	tty_termios_encode_baud_rate(termios, baud, baud);
	serial->type->set_termios(tty, port, &dummy);

	tty_port_tty_set(&port->port, NULL);
	kfree(termios);
	kfree(tty);
	}
	}

	port->console = 1;
	retval = 0;

	out:
	return retval;
	free_termios:
	kfree(termios);
	tty_port_tty_set(&port->port, NULL);
	free_tty:
	kfree(tty);
	reset_open_count:
	port->port.count = 0;
	goto out;
	}

	static void usb_console_write(struct console *co,
	const char *buf, unsigned count)
	{
	static struct usbcons_info *info = &usbcons_info;
	struct usb_serial_port *port = info->port;
	struct usb_serial *serial;
	int retval = -ENODEV;

	if (!port \|\| port->serial->dev->state == USB_STATE_NOTATTACHED)
	return;
	serial = port->serial;

	if (count == 0)
	return;

	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);

	if (!port->port.count) {
	dbg("%s - port not opened", __func__);
	return;
	}

	while (count) {
	unsigned int i;
	unsigned int lf;
	/* search for LF so we can insert CR if necessary */
	for (i = 0, lf = 0 ; i < count ; i++) {
	if (*(buf + i) == 10) {
	lf = 1;
	i++;
	break;
	}
	}
	/* pass on to the driver specific version of this function if
	it is available */
	if (serial->type->write)
	retval = serial->type->write(NULL, port, buf, i);
	else
	retval = usb_serial_generic_write(NULL, port, buf, i);
	dbg("%s - return value : %d", __func__, retval);
	if (lf) {
	/* append CR after LF */
	unsigned char cr = 13;
	if (serial->type->write)
	retval = serial->type->write(NULL,
	port, &cr, 1);
	else
	retval = usb_serial_generic_write(NULL,
	port, &cr, 1);
	dbg("%s - return value : %d", __func__, retval);
	}
	buf += i;
	count -= i;
	}
	}

	static struct console usbcons = {
	.name = "ttyUSB",
	.write = usb_console_write,
	.setup = usb_console_setup,
	.flags = CON_PRINTBUFFER,
	.index = -1,
	};

	void usb_serial_console_disconnect(struct usb_serial *serial)
	{
	if (serial && serial->port && serial->port[0]
	&& serial->port[0] == usbcons_info.port) {
	usb_serial_console_exit();
	usb_serial_put(serial);
	}
	}

	void usb_serial_console_init(int serial_debug, int minor)
	{
	debug = serial_debug;

	if (minor == 0) {
	/*
	* Call register_console() if this is the first device plugged
	* in. If we call it earlier, then the callback to
	* console_setup() will fail, as there is not a device seen by
	* the USB subsystem yet.
	*/
	/*
	* Register console.
	* NOTES:
	* console_setup() is called (back) immediately (from
	* register_console). console_write() is called immediately
	* from register_console iff CON_PRINTBUFFER is set in flags.
	*/
	dbg("registering the USB serial console.");
	register_console(&usbcons);
	}
	}

	void usb_serial_console_exit(void)
	{
	if (usbcons_info.port) {
	unregister_console(&usbcons);
	if (usbcons_info.port->port.count)
	usbcons_info.port->port.count--;
	usbcons_info.port = NULL;
	}
	}