| /* |
| * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs |
| * |
| * Copyright 2009 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/mfd/adp5520.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| struct adp5520_bl { |
| struct device *master; |
| struct adp5520_backlight_platform_data *pdata; |
| struct mutex lock; |
| unsigned long cached_daylight_max; |
| int id; |
| int current_brightness; |
| }; |
| |
| static int adp5520_bl_set(struct backlight_device *bl, int brightness) |
| { |
| struct adp5520_bl *data = bl_get_data(bl); |
| struct device *master = data->master; |
| int ret = 0; |
| |
| if (data->pdata->en_ambl_sens) { |
| if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { |
| /* Disable Ambient Light auto adjust */ |
| ret |= adp5520_clr_bits(master, ADP5520_BL_CONTROL, |
| ADP5520_BL_AUTO_ADJ); |
| ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, |
| brightness); |
| } else { |
| /* |
| * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust |
| * restore daylight l3 sysfs brightness |
| */ |
| ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, |
| data->cached_daylight_max); |
| ret |= adp5520_set_bits(master, ADP5520_BL_CONTROL, |
| ADP5520_BL_AUTO_ADJ); |
| } |
| } else { |
| ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, brightness); |
| } |
| |
| if (data->current_brightness && brightness == 0) |
| ret |= adp5520_set_bits(master, |
| ADP5520_MODE_STATUS, ADP5520_DIM_EN); |
| else if (data->current_brightness == 0 && brightness) |
| ret |= adp5520_clr_bits(master, |
| ADP5520_MODE_STATUS, ADP5520_DIM_EN); |
| |
| if (!ret) |
| data->current_brightness = brightness; |
| |
| return ret; |
| } |
| |
| static int adp5520_bl_update_status(struct backlight_device *bl) |
| { |
| int brightness = bl->props.brightness; |
| if (bl->props.power != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (bl->props.fb_blank != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| return adp5520_bl_set(bl, brightness); |
| } |
| |
| static int adp5520_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct adp5520_bl *data = bl_get_data(bl); |
| int error; |
| uint8_t reg_val; |
| |
| error = adp5520_read(data->master, ADP5520_BL_VALUE, ®_val); |
| |
| return error ? data->current_brightness : reg_val; |
| } |
| |
| static const struct backlight_ops adp5520_bl_ops = { |
| .update_status = adp5520_bl_update_status, |
| .get_brightness = adp5520_bl_get_brightness, |
| }; |
| |
| static int adp5520_bl_setup(struct backlight_device *bl) |
| { |
| struct adp5520_bl *data = bl_get_data(bl); |
| struct device *master = data->master; |
| struct adp5520_backlight_platform_data *pdata = data->pdata; |
| int ret = 0; |
| |
| ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, |
| pdata->l1_daylight_max); |
| ret |= adp5520_write(master, ADP5520_DAYLIGHT_DIM, |
| pdata->l1_daylight_dim); |
| |
| if (pdata->en_ambl_sens) { |
| data->cached_daylight_max = pdata->l1_daylight_max; |
| ret |= adp5520_write(master, ADP5520_OFFICE_MAX, |
| pdata->l2_office_max); |
| ret |= adp5520_write(master, ADP5520_OFFICE_DIM, |
| pdata->l2_office_dim); |
| ret |= adp5520_write(master, ADP5520_DARK_MAX, |
| pdata->l3_dark_max); |
| ret |= adp5520_write(master, ADP5520_DARK_DIM, |
| pdata->l3_dark_dim); |
| ret |= adp5520_write(master, ADP5520_L2_TRIP, |
| pdata->l2_trip); |
| ret |= adp5520_write(master, ADP5520_L2_HYS, |
| pdata->l2_hyst); |
| ret |= adp5520_write(master, ADP5520_L3_TRIP, |
| pdata->l3_trip); |
| ret |= adp5520_write(master, ADP5520_L3_HYS, |
| pdata->l3_hyst); |
| ret |= adp5520_write(master, ADP5520_ALS_CMPR_CFG, |
| ALS_CMPR_CFG_VAL(pdata->abml_filt, |
| ADP5520_L3_EN)); |
| } |
| |
| ret |= adp5520_write(master, ADP5520_BL_CONTROL, |
| BL_CTRL_VAL(pdata->fade_led_law, |
| pdata->en_ambl_sens)); |
| |
| ret |= adp5520_write(master, ADP5520_BL_FADE, FADE_VAL(pdata->fade_in, |
| pdata->fade_out)); |
| |
| ret |= adp5520_set_bits(master, ADP5520_MODE_STATUS, |
| ADP5520_BL_EN | ADP5520_DIM_EN); |
| |
| return ret; |
| } |
| |
| static ssize_t adp5520_show(struct device *dev, char *buf, int reg) |
| { |
| struct adp5520_bl *data = dev_get_drvdata(dev); |
| int ret; |
| uint8_t reg_val; |
| |
| mutex_lock(&data->lock); |
| ret = adp5520_read(data->master, reg, ®_val); |
| mutex_unlock(&data->lock); |
| |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%u\n", reg_val); |
| } |
| |
| static ssize_t adp5520_store(struct device *dev, const char *buf, |
| size_t count, int reg) |
| { |
| struct adp5520_bl *data = dev_get_drvdata(dev); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->lock); |
| adp5520_write(data->master, reg, val); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t adp5520_bl_dark_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_DARK_MAX); |
| } |
| |
| static ssize_t adp5520_bl_dark_max_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp5520_store(dev, buf, count, ADP5520_DARK_MAX); |
| } |
| static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show, |
| adp5520_bl_dark_max_store); |
| |
| static ssize_t adp5520_bl_office_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_OFFICE_MAX); |
| } |
| |
| static ssize_t adp5520_bl_office_max_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp5520_store(dev, buf, count, ADP5520_OFFICE_MAX); |
| } |
| static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show, |
| adp5520_bl_office_max_store); |
| |
| static ssize_t adp5520_bl_daylight_max_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_DAYLIGHT_MAX); |
| } |
| |
| static ssize_t adp5520_bl_daylight_max_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct adp5520_bl *data = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &data->cached_daylight_max); |
| if (ret < 0) |
| return ret; |
| |
| return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_MAX); |
| } |
| static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show, |
| adp5520_bl_daylight_max_store); |
| |
| static ssize_t adp5520_bl_dark_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_DARK_DIM); |
| } |
| |
| static ssize_t adp5520_bl_dark_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp5520_store(dev, buf, count, ADP5520_DARK_DIM); |
| } |
| static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show, |
| adp5520_bl_dark_dim_store); |
| |
| static ssize_t adp5520_bl_office_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_OFFICE_DIM); |
| } |
| |
| static ssize_t adp5520_bl_office_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp5520_store(dev, buf, count, ADP5520_OFFICE_DIM); |
| } |
| static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show, |
| adp5520_bl_office_dim_store); |
| |
| static ssize_t adp5520_bl_daylight_dim_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return adp5520_show(dev, buf, ADP5520_DAYLIGHT_DIM); |
| } |
| |
| static ssize_t adp5520_bl_daylight_dim_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_DIM); |
| } |
| static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show, |
| adp5520_bl_daylight_dim_store); |
| |
| static struct attribute *adp5520_bl_attributes[] = { |
| &dev_attr_dark_max.attr, |
| &dev_attr_dark_dim.attr, |
| &dev_attr_office_max.attr, |
| &dev_attr_office_dim.attr, |
| &dev_attr_daylight_max.attr, |
| &dev_attr_daylight_dim.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group adp5520_bl_attr_group = { |
| .attrs = adp5520_bl_attributes, |
| }; |
| |
| static int adp5520_bl_probe(struct platform_device *pdev) |
| { |
| struct backlight_properties props; |
| struct backlight_device *bl; |
| struct adp5520_bl *data; |
| int ret = 0; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| |
| data->master = pdev->dev.parent; |
| data->pdata = dev_get_platdata(&pdev->dev); |
| |
| if (data->pdata == NULL) { |
| dev_err(&pdev->dev, "missing platform data\n"); |
| return -ENODEV; |
| } |
| |
| data->id = pdev->id; |
| data->current_brightness = 0; |
| |
| mutex_init(&data->lock); |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = ADP5020_MAX_BRIGHTNESS; |
| bl = backlight_device_register(pdev->name, data->master, data, |
| &adp5520_bl_ops, &props); |
| if (IS_ERR(bl)) { |
| dev_err(&pdev->dev, "failed to register backlight\n"); |
| return PTR_ERR(bl); |
| } |
| |
| bl->props.brightness = ADP5020_MAX_BRIGHTNESS; |
| if (data->pdata->en_ambl_sens) |
| ret = sysfs_create_group(&bl->dev.kobj, |
| &adp5520_bl_attr_group); |
| |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register sysfs\n"); |
| backlight_device_unregister(bl); |
| } |
| |
| platform_set_drvdata(pdev, bl); |
| ret |= adp5520_bl_setup(bl); |
| backlight_update_status(bl); |
| |
| return ret; |
| } |
| |
| static int adp5520_bl_remove(struct platform_device *pdev) |
| { |
| struct backlight_device *bl = platform_get_drvdata(pdev); |
| struct adp5520_bl *data = bl_get_data(bl); |
| |
| adp5520_clr_bits(data->master, ADP5520_MODE_STATUS, ADP5520_BL_EN); |
| |
| if (data->pdata->en_ambl_sens) |
| sysfs_remove_group(&bl->dev.kobj, |
| &adp5520_bl_attr_group); |
| |
| backlight_device_unregister(bl); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int adp5520_bl_suspend(struct device *dev) |
| { |
| struct backlight_device *bl = dev_get_drvdata(dev); |
| |
| return adp5520_bl_set(bl, 0); |
| } |
| |
| static int adp5520_bl_resume(struct device *dev) |
| { |
| struct backlight_device *bl = dev_get_drvdata(dev); |
| |
| backlight_update_status(bl); |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(adp5520_bl_pm_ops, adp5520_bl_suspend, |
| adp5520_bl_resume); |
| |
| static struct platform_driver adp5520_bl_driver = { |
| .driver = { |
| .name = "adp5520-backlight", |
| .owner = THIS_MODULE, |
| .pm = &adp5520_bl_pm_ops, |
| }, |
| .probe = adp5520_bl_probe, |
| .remove = adp5520_bl_remove, |
| }; |
| |
| module_platform_driver(adp5520_bl_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("ADP5520(01) Backlight Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:adp5520-backlight"); |