tools/testing/selftests/kmod/kmod.sh - kernel/msm-4.19 - Gitiles

 #!/bin/bash
 #
 # Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by the Free
 # Software Foundation; either version 2 of the License, or at your option any
 # later version; or, when distributed separately from the Linux kernel or
 # when incorporated into other software packages, subject to the following
 # license:
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms of copyleft-next (version 0.3.1 or later) as published
 # at http://copyleft-next.org/.

 # This is a stress test script for kmod, the kernel module loader. It uses
 # test_kmod which exposes a series of knobs for the API for us so we can
 # tweak each test in userspace rather than in kernelspace.
 #
 # The way kmod works is it uses the kernel's usermode helper API to eventually
 # call /sbin/modprobe. It has a limit of the number of concurrent calls
 # possible. The kernel interface to load modules is request_module(), however
 # mount uses get_fs_type(). Both behave slightly differently, but the
 # differences are important enough to test each call separately. For this
 # reason test_kmod starts by providing tests for both calls.
 #
 # The test driver test_kmod assumes a series of defaults which you can
 # override by exporting to your environment prior running this script.
 # For instance this script assumes you do not have xfs loaded upon boot.
 # If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this
 # script if the filesyste module you don't have loaded upon bootup
 # is ext4 instead. Refer to allow_user_defaults() for a list of user
 # override variables possible.
 #
 # You'll want at least 4 GiB of RAM to expect to run these tests
 # without running out of memory on them. For other requirements refer
 # to test_reqs()

 set -e

 TEST_NAME="kmod"
 TEST_DRIVER="test_${TEST_NAME}"
 TEST_DIR=$(dirname $0)

 # This represents
 #
 # TEST_ID:TEST_COUNT:ENABLED
 #
 # TEST_ID: is the test id number
 # TEST_COUNT: number of times we should run the test
 # ENABLED: 1 if enabled, 0 otherwise
 #
 # Once these are enabled please leave them as-is. Write your own test,
 # we have tons of space.
 ALL_TESTS="0001:3:1"
 ALL_TESTS="$ALL_TESTS 0002:3:1"
 ALL_TESTS="$ALL_TESTS 0003:1:1"
 ALL_TESTS="$ALL_TESTS 0004:1:1"
 ALL_TESTS="$ALL_TESTS 0005:10:1"
 ALL_TESTS="$ALL_TESTS 0006:10:1"
 ALL_TESTS="$ALL_TESTS 0007:5:1"
 ALL_TESTS="$ALL_TESTS 0008:150:1"
 ALL_TESTS="$ALL_TESTS 0009:150:1"

 test_modprobe()
 {
        if [ ! -d $DIR ]; then
                echo "$0: $DIR not present" >&2
                echo "You must have the following enabled in your kernel:" >&2
                cat $TEST_DIR/config >&2
                exit 1
        fi
 }

 function allow_user_defaults()
 {
 	if [ -z $DEFAULT_KMOD_DRIVER ]; then
 		DEFAULT_KMOD_DRIVER="test_module"
 	fi

 	if [ -z $DEFAULT_KMOD_FS ]; then
 		DEFAULT_KMOD_FS="xfs"
 	fi

 	if [ -z $PROC_DIR ]; then
 		PROC_DIR="/proc/sys/kernel/"
 	fi

 	if [ -z $MODPROBE_LIMIT ]; then
 		MODPROBE_LIMIT=50
 	fi

 	if [ -z $DIR ]; then
 		DIR="/sys/devices/virtual/misc/${TEST_DRIVER}0/"
 	fi

 	if [ -z $DEFAULT_NUM_TESTS ]; then
 		DEFAULT_NUM_TESTS=150
 	fi

 	MODPROBE_LIMIT_FILE="${PROC_DIR}/kmod-limit"
 }

 test_reqs()
 {
 	if ! which modprobe 2> /dev/null > /dev/null; then
 		echo "$0: You need modprobe installed" >&2
 		exit 1
 	fi

 	if ! which kmod 2> /dev/null > /dev/null; then
 		echo "$0: You need kmod installed" >&2
 		exit 1
 	fi

 	# kmod 19 has a bad bug where it returns 0 when modprobe
 	# gets called *even* if the module was not loaded due to
 	# some bad heuristics. For details see:
 	#
 	# A work around is possible in-kernel but its rather
 	# complex.
 	KMOD_VERSION=$(kmod --version | awk '{print $3}')
 	if [[ $KMOD_VERSION  -le 19 ]]; then
 		echo "$0: You need at least kmod 20" >&2
 		echo "kmod <= 19 is buggy, for details see:" >&2
 		echo "http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/libkmod/libkmod-module.c?id=fd44a98ae2eb5eb32161088954ab21e58e19dfc4" >&2
 		exit 1
 	fi

 	uid=$(id -u)
 	if [ $uid -ne 0 ]; then
 		echo $msg must be run as root >&2
 		exit 0
 	fi
 }

 function load_req_mod()
 {
 	trap "test_modprobe" EXIT

 	if [ ! -d $DIR ]; then
 		# Alanis: "Oh isn't it ironic?"
 		modprobe $TEST_DRIVER
 	fi
 }

 test_finish()
 {
 	echo "Test completed"
 }

 errno_name_to_val()
 {
 	case "$1" in
 	# kmod calls modprobe and upon of a module not found
 	# modprobe returns just 1... However in the kernel we
 	# *sometimes* see 256...
 	MODULE_NOT_FOUND)
 		echo 256;;
 	SUCCESS)
 		echo 0;;
 	-EPERM)
 		echo -1;;
 	-ENOENT)
 		echo -2;;
 	-EINVAL)
 		echo -22;;
 	-ERR_ANY)
 		echo -123456;;
 	*)
 		echo invalid;;
 	esac
 }

 errno_val_to_name()
 	case "$1" in
 	256)
 		echo MODULE_NOT_FOUND;;
 	0)
 		echo SUCCESS;;
 	-1)
 		echo -EPERM;;
 	-2)
 		echo -ENOENT;;
 	-22)
 		echo -EINVAL;;
 	-123456)
 		echo -ERR_ANY;;
 	*)
 		echo invalid;;
 	esac

 config_set_test_case_driver()
 {
 	if ! echo -n 1 >$DIR/config_test_case; then
 		echo "$0: Unable to set to test case to driver" >&2
 		exit 1
 	fi
 }

 config_set_test_case_fs()
 {
 	if ! echo -n 2 >$DIR/config_test_case; then
 		echo "$0: Unable to set to test case to fs" >&2
 		exit 1
 	fi
 }

 config_num_threads()
 {
 	if ! echo -n $1 >$DIR/config_num_threads; then
 		echo "$0: Unable to set to number of threads" >&2
 		exit 1
 	fi
 }

 config_get_modprobe_limit()
 {
 	if [[ -f ${MODPROBE_LIMIT_FILE} ]] ; then
 		MODPROBE_LIMIT=$(cat $MODPROBE_LIMIT_FILE)
 	fi
 	echo $MODPROBE_LIMIT
 }

 config_num_thread_limit_extra()
 {
 	MODPROBE_LIMIT=$(config_get_modprobe_limit)
 	let EXTRA_LIMIT=$MODPROBE_LIMIT+$1
 	config_num_threads $EXTRA_LIMIT
 }

 # For special characters use printf directly,
 # refer to kmod_test_0001
 config_set_driver()
 {
 	if ! echo -n $1 >$DIR/config_test_driver; then
 		echo "$0: Unable to set driver" >&2
 		exit 1
 	fi
 }

 config_set_fs()
 {
 	if ! echo -n $1 >$DIR/config_test_fs; then
 		echo "$0: Unable to set driver" >&2
 		exit 1
 	fi
 }

 config_get_driver()
 {
 	cat $DIR/config_test_driver
 }

 config_get_test_result()
 {
 	cat $DIR/test_result
 }

 config_reset()
 {
 	if ! echo -n "1" >"$DIR"/reset; then
 		echo "$0: reset shuld have worked" >&2
 		exit 1
 	fi
 }

 config_show_config()
 {
 	echo "----------------------------------------------------"
 	cat "$DIR"/config
 	echo "----------------------------------------------------"
 }

 config_trigger()
 {
 	if ! echo -n "1" >"$DIR"/trigger_config 2>/dev/null; then
 		echo "$1: FAIL - loading should have worked"
 		config_show_config
 		exit 1
 	fi
 	echo "$1: OK! - loading kmod test"
 }

 config_trigger_want_fail()
 {
 	if echo "1" > $DIR/trigger_config 2>/dev/null; then
 		echo "$1: FAIL - test case was expected to fail"
 		config_show_config
 		exit 1
 	fi
 	echo "$1: OK! - kmod test case failed as expected"
 }

 config_expect_result()
 {
 	RC=$(config_get_test_result)
 	RC_NAME=$(errno_val_to_name $RC)

 	ERRNO_NAME=$2
 	ERRNO=$(errno_name_to_val $ERRNO_NAME)

 	if [[ $ERRNO_NAME = "-ERR_ANY" ]]; then
 		if [[ $RC -ge 0 ]]; then
 			echo "$1: FAIL, test expects $ERRNO_NAME - got $RC_NAME ($RC)" >&2
 			config_show_config
 			exit 1
 		fi
 	elif [[ $RC != $ERRNO ]]; then
 		echo "$1: FAIL, test expects $ERRNO_NAME ($ERRNO) - got $RC_NAME ($RC)" >&2
 		config_show_config
 		exit 1
 	fi
 	echo "$1: OK! - Return value: $RC ($RC_NAME), expected $ERRNO_NAME"
 }

 kmod_defaults_driver()
 {
 	config_reset
 	modprobe -r $DEFAULT_KMOD_DRIVER
 	config_set_driver $DEFAULT_KMOD_DRIVER
 }

 kmod_defaults_fs()
 {
 	config_reset
 	modprobe -r $DEFAULT_KMOD_FS
 	config_set_fs $DEFAULT_KMOD_FS
 	config_set_test_case_fs
 }

 kmod_test_0001_driver()
 {
 	NAME='\000'

 	kmod_defaults_driver
 	config_num_threads 1
 	printf '\000' >"$DIR"/config_test_driver
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
 }

 kmod_test_0001_fs()
 {
 	NAME='\000'

 	kmod_defaults_fs
 	config_num_threads 1
 	printf '\000' >"$DIR"/config_test_fs
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} -EINVAL
 }

 kmod_test_0001()
 {
 	kmod_test_0001_driver
 	kmod_test_0001_fs
 }

 kmod_test_0002_driver()
 {
 	NAME="nope-$DEFAULT_KMOD_DRIVER"

 	kmod_defaults_driver
 	config_set_driver $NAME
 	config_num_threads 1
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
 }

 kmod_test_0002_fs()
 {
 	NAME="nope-$DEFAULT_KMOD_FS"

 	kmod_defaults_fs
 	config_set_fs $NAME
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} -EINVAL
 }

 kmod_test_0002()
 {
 	kmod_test_0002_driver
 	kmod_test_0002_fs
 }

 kmod_test_0003()
 {
 	kmod_defaults_fs
 	config_num_threads 1
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 kmod_test_0004()
 {
 	kmod_defaults_fs
 	config_num_threads 2
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 kmod_test_0005()
 {
 	kmod_defaults_driver
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 kmod_test_0006()
 {
 	kmod_defaults_fs
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 kmod_test_0007()
 {
 	kmod_test_0005
 	kmod_test_0006
 }

 kmod_test_0008()
 {
 	kmod_defaults_driver
 	MODPROBE_LIMIT=$(config_get_modprobe_limit)
 	let EXTRA=$MODPROBE_LIMIT/6
 	config_num_thread_limit_extra $EXTRA
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 kmod_test_0009()
 {
 	kmod_defaults_fs
 	MODPROBE_LIMIT=$(config_get_modprobe_limit)
 	let EXTRA=$MODPROBE_LIMIT/4
 	config_num_thread_limit_extra $EXTRA
 	config_trigger ${FUNCNAME[0]}
 	config_expect_result ${FUNCNAME[0]} SUCCESS
 }

 list_tests()
 {
 	echo "Test ID list:"
 	echo
 	echo "TEST_ID x NUM_TEST"
 	echo "TEST_ID:   Test ID"
 	echo "NUM_TESTS: Number of recommended times to run the test"
 	echo
 	echo "0001 x $(get_test_count 0001) - Simple test - 1 thread  for empty string"
 	echo "0002 x $(get_test_count 0002) - Simple test - 1 thread  for modules/filesystems that do not exist"
 	echo "0003 x $(get_test_count 0003) - Simple test - 1 thread  for get_fs_type() only"
 	echo "0004 x $(get_test_count 0004) - Simple test - 2 threads for get_fs_type() only"
 	echo "0005 x $(get_test_count 0005) - multithreaded tests with default setup - request_module() only"
 	echo "0006 x $(get_test_count 0006) - multithreaded tests with default setup - get_fs_type() only"
 	echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
 	echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
 	echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
 }

 usage()
 {
 	NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
 	let NUM_TESTS=$NUM_TESTS+1
 	MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
 	echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
 	echo "		 [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
 	echo "           [ all ] [ -h | --help ] [ -l ]"
 	echo ""
 	echo "Valid tests: 0001-$MAX_TEST"
 	echo ""
 	echo "    all     Runs all tests (default)"
 	echo "    -t      Run test ID the number amount of times is recommended"
 	echo "    -w      Watch test ID run until it runs into an error"
 	echo "    -c      Run test ID once"
 	echo "    -s      Run test ID x test-count number of times"
 	echo "    -l      List all test ID list"
 	echo " -h|--help  Help"
 	echo
 	echo "If an error every occurs execution will immediately terminate."
 	echo "If you are adding a new test try using -w <test-ID> first to"
 	echo "make sure the test passes a series of tests."
 	echo
 	echo Example uses:
 	echo
 	echo "${TEST_NAME}.sh		-- executes all tests"
 	echo "${TEST_NAME}.sh -t 0008	-- Executes test ID 0008 number of times is recomended"
 	echo "${TEST_NAME}.sh -w 0008	-- Watch test ID 0008 run until an error occurs"
 	echo "${TEST_NAME}.sh -s 0008	-- Run test ID 0008 once"
 	echo "${TEST_NAME}.sh -c 0008 3	-- Run test ID 0008 three times"
 	echo
 	list_tests
 	exit 1
 }

 function test_num()
 {
 	re='^[0-9]+$'
 	if ! [[ $1 =~ $re ]]; then
 		usage
 	fi
 }

 function get_test_count()
 {
 	test_num $1
 	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
 	LAST_TWO=${TEST_DATA#*:*}
 	echo ${LAST_TWO%:*}
 }

 function get_test_enabled()
 {
 	test_num $1
 	TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
 	echo ${TEST_DATA#*:*:}
 }

 function run_all_tests()
 {
 	for i in $ALL_TESTS ; do
 		TEST_ID=${i%:*:*}
 		ENABLED=$(get_test_enabled $TEST_ID)
 		TEST_COUNT=$(get_test_count $TEST_ID)
 		if [[ $ENABLED -eq "1" ]]; then
 			test_case $TEST_ID $TEST_COUNT
 		fi
 	done
 }

 function watch_log()
 {
 	if [ $# -ne 3 ]; then
 		clear
 	fi
 	date
 	echo "Running test: $2 - run #$1"
 }

 function watch_case()
 {
 	i=0
 	while [ 1 ]; do

 		if [ $# -eq 1 ]; then
 			test_num $1
 			watch_log $i ${TEST_NAME}_test_$1
 			${TEST_NAME}_test_$1
 		else
 			watch_log $i all
 			run_all_tests
 		fi
 		let i=$i+1
 	done
 }

 function test_case()
 {
 	NUM_TESTS=$DEFAULT_NUM_TESTS
 	if [ $# -eq 2 ]; then
 		NUM_TESTS=$2
 	fi

 	i=0
 	while [ $i -lt $NUM_TESTS ]; do
 		test_num $1
 		watch_log $i ${TEST_NAME}_test_$1 noclear
 		RUN_TEST=${TEST_NAME}_test_$1
 		$RUN_TEST
 		let i=$i+1
 	done
 }

 function parse_args()
 {
 	if [ $# -eq 0 ]; then
 		run_all_tests
 	else
 		if [[ "$1" = "all" ]]; then
 			run_all_tests
 		elif [[ "$1" = "-w" ]]; then
 			shift
 			watch_case $@
 		elif [[ "$1" = "-t" ]]; then
 			shift
 			test_num $1
 			test_case $1 $(get_test_count $1)
 		elif [[ "$1" = "-c" ]]; then
 			shift
 			test_num $1
 			test_num $2
 			test_case $1 $2
 		elif [[ "$1" = "-s" ]]; then
 			shift
 			test_case $1 1
 		elif [[ "$1" = "-l" ]]; then
 			list_tests
 		elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
 			usage
 		else
 			usage
 		fi
 	fi
 }

 test_reqs
 allow_user_defaults
 load_req_mod

 trap "test_finish" EXIT

 parse_args $@

 exit 0
	#!/bin/bash
	#
	# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
	#
	# This program is free software; you can redistribute it and/or modify it
	# under the terms of the GNU General Public License as published by the Free
	# Software Foundation; either version 2 of the License, or at your option any
	# later version; or, when distributed separately from the Linux kernel or
	# when incorporated into other software packages, subject to the following
	# license:
	#
	# This program is free software; you can redistribute it and/or modify it
	# under the terms of copyleft-next (version 0.3.1 or later) as published
	# at http://copyleft-next.org/.

	# This is a stress test script for kmod, the kernel module loader. It uses
	# test_kmod which exposes a series of knobs for the API for us so we can
	# tweak each test in userspace rather than in kernelspace.
	#
	# The way kmod works is it uses the kernel's usermode helper API to eventually
	# call /sbin/modprobe. It has a limit of the number of concurrent calls
	# possible. The kernel interface to load modules is request_module(), however
	# mount uses get_fs_type(). Both behave slightly differently, but the
	# differences are important enough to test each call separately. For this
	# reason test_kmod starts by providing tests for both calls.
	#
	# The test driver test_kmod assumes a series of defaults which you can
	# override by exporting to your environment prior running this script.
	# For instance this script assumes you do not have xfs loaded upon boot.
	# If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this
	# script if the filesyste module you don't have loaded upon bootup
	# is ext4 instead. Refer to allow_user_defaults() for a list of user
	# override variables possible.
	#
	# You'll want at least 4 GiB of RAM to expect to run these tests
	# without running out of memory on them. For other requirements refer
	# to test_reqs()

	set -e

	TEST_NAME="kmod"
	TEST_DRIVER="test_${TEST_NAME}"
	TEST_DIR=$(dirname $0)

	# This represents
	#
	# TEST_ID:TEST_COUNT:ENABLED
	#
	# TEST_ID: is the test id number
	# TEST_COUNT: number of times we should run the test
	# ENABLED: 1 if enabled, 0 otherwise
	#
	# Once these are enabled please leave them as-is. Write your own test,
	# we have tons of space.
	ALL_TESTS="0001:3:1"
	ALL_TESTS="$ALL_TESTS 0002:3:1"
	ALL_TESTS="$ALL_TESTS 0003:1:1"
	ALL_TESTS="$ALL_TESTS 0004:1:1"
	ALL_TESTS="$ALL_TESTS 0005:10:1"
	ALL_TESTS="$ALL_TESTS 0006:10:1"
	ALL_TESTS="$ALL_TESTS 0007:5:1"
	ALL_TESTS="$ALL_TESTS 0008:150:1"
	ALL_TESTS="$ALL_TESTS 0009:150:1"

	test_modprobe()
	{
	if [ ! -d $DIR ]; then
	echo "$0: $DIR not present" >&2
	echo "You must have the following enabled in your kernel:" >&2
	cat $TEST_DIR/config >&2
	exit 1
	fi
	}

	function allow_user_defaults()
	{
	if [ -z $DEFAULT_KMOD_DRIVER ]; then
	DEFAULT_KMOD_DRIVER="test_module"
	fi

	if [ -z $DEFAULT_KMOD_FS ]; then
	DEFAULT_KMOD_FS="xfs"
	fi

	if [ -z $PROC_DIR ]; then
	PROC_DIR="/proc/sys/kernel/"
	fi

	if [ -z $MODPROBE_LIMIT ]; then
	MODPROBE_LIMIT=50
	fi

	if [ -z $DIR ]; then
	DIR="/sys/devices/virtual/misc/${TEST_DRIVER}0/"
	fi

	if [ -z $DEFAULT_NUM_TESTS ]; then
	DEFAULT_NUM_TESTS=150
	fi

	MODPROBE_LIMIT_FILE="${PROC_DIR}/kmod-limit"
	}

	test_reqs()
	{
	if ! which modprobe 2> /dev/null > /dev/null; then
	echo "$0: You need modprobe installed" >&2
	exit 1
	fi

	if ! which kmod 2> /dev/null > /dev/null; then
	echo "$0: You need kmod installed" >&2
	exit 1
	fi

	# kmod 19 has a bad bug where it returns 0 when modprobe
	# gets called even if the module was not loaded due to
	# some bad heuristics. For details see:
	#
	# A work around is possible in-kernel but its rather
	# complex.
	KMOD_VERSION=$(kmod --version \| awk '{print $3}')
	if [[ $KMOD_VERSION -le 19 ]]; then
	echo "$0: You need at least kmod 20" >&2
	echo "kmod <= 19 is buggy, for details see:" >&2
	echo "http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/libkmod/libkmod-module.c?id=fd44a98ae2eb5eb32161088954ab21e58e19dfc4" >&2
	exit 1
	fi

	uid=$(id -u)
	if [ $uid -ne 0 ]; then
	echo $msg must be run as root >&2
	exit 0
	fi
	}

	function load_req_mod()
	{
	trap "test_modprobe" EXIT

	if [ ! -d $DIR ]; then
	# Alanis: "Oh isn't it ironic?"
	modprobe $TEST_DRIVER
	fi
	}

	test_finish()
	{
	echo "Test completed"
	}

	errno_name_to_val()
	{
	case "$1" in
	# kmod calls modprobe and upon of a module not found
	# modprobe returns just 1... However in the kernel we
	# sometimes see 256...
	MODULE_NOT_FOUND)
	echo 256;;
	SUCCESS)
	echo 0;;
	-EPERM)
	echo -1;;
	-ENOENT)
	echo -2;;
	-EINVAL)
	echo -22;;
	-ERR_ANY)
	echo -123456;;
	*)
	echo invalid;;
	esac
	}

	errno_val_to_name()
	case "$1" in
	256)
	echo MODULE_NOT_FOUND;;
	0)
	echo SUCCESS;;
	-1)
	echo -EPERM;;
	-2)
	echo -ENOENT;;
	-22)
	echo -EINVAL;;
	-123456)
	echo -ERR_ANY;;
	*)
	echo invalid;;
	esac

	config_set_test_case_driver()
	{
	if ! echo -n 1 >$DIR/config_test_case; then
	echo "$0: Unable to set to test case to driver" >&2
	exit 1
	fi
	}

	config_set_test_case_fs()
	{
	if ! echo -n 2 >$DIR/config_test_case; then
	echo "$0: Unable to set to test case to fs" >&2
	exit 1
	fi
	}

	config_num_threads()
	{
	if ! echo -n $1 >$DIR/config_num_threads; then
	echo "$0: Unable to set to number of threads" >&2
	exit 1
	fi
	}

	config_get_modprobe_limit()
	{
	if [[ -f ${MODPROBE_LIMIT_FILE} ]] ; then
	MODPROBE_LIMIT=$(cat $MODPROBE_LIMIT_FILE)
	fi
	echo $MODPROBE_LIMIT
	}

	config_num_thread_limit_extra()
	{
	MODPROBE_LIMIT=$(config_get_modprobe_limit)
	let EXTRA_LIMIT=$MODPROBE_LIMIT+$1
	config_num_threads $EXTRA_LIMIT
	}

	# For special characters use printf directly,
	# refer to kmod_test_0001
	config_set_driver()
	{
	if ! echo -n $1 >$DIR/config_test_driver; then
	echo "$0: Unable to set driver" >&2
	exit 1
	fi
	}

	config_set_fs()
	{
	if ! echo -n $1 >$DIR/config_test_fs; then
	echo "$0: Unable to set driver" >&2
	exit 1
	fi
	}

	config_get_driver()
	{
	cat $DIR/config_test_driver
	}

	config_get_test_result()
	{
	cat $DIR/test_result
	}

	config_reset()
	{
	if ! echo -n "1" >"$DIR"/reset; then
	echo "$0: reset shuld have worked" >&2
	exit 1
	fi
	}

	config_show_config()
	{
	echo "----------------------------------------------------"
	cat "$DIR"/config
	echo "----------------------------------------------------"
	}

	config_trigger()
	{
	if ! echo -n "1" >"$DIR"/trigger_config 2>/dev/null; then
	echo "$1: FAIL - loading should have worked"
	config_show_config
	exit 1
	fi
	echo "$1: OK! - loading kmod test"
	}

	config_trigger_want_fail()
	{
	if echo "1" > $DIR/trigger_config 2>/dev/null; then
	echo "$1: FAIL - test case was expected to fail"
	config_show_config
	exit 1
	fi
	echo "$1: OK! - kmod test case failed as expected"
	}

	config_expect_result()
	{
	RC=$(config_get_test_result)
	RC_NAME=$(errno_val_to_name $RC)

	ERRNO_NAME=$2
	ERRNO=$(errno_name_to_val $ERRNO_NAME)

	if [[ $ERRNO_NAME = "-ERR_ANY" ]]; then
	if [[ $RC -ge 0 ]]; then
	echo "$1: FAIL, test expects $ERRNO_NAME - got $RC_NAME ($RC)" >&2
	config_show_config
	exit 1
	fi
	elif [[ $RC != $ERRNO ]]; then
	echo "$1: FAIL, test expects $ERRNO_NAME ($ERRNO) - got $RC_NAME ($RC)" >&2
	config_show_config
	exit 1
	fi
	echo "$1: OK! - Return value: $RC ($RC_NAME), expected $ERRNO_NAME"
	}

	kmod_defaults_driver()
	{
	config_reset
	modprobe -r $DEFAULT_KMOD_DRIVER
	config_set_driver $DEFAULT_KMOD_DRIVER
	}

	kmod_defaults_fs()
	{
	config_reset
	modprobe -r $DEFAULT_KMOD_FS
	config_set_fs $DEFAULT_KMOD_FS
	config_set_test_case_fs
	}

	kmod_test_0001_driver()
	{
	NAME='\000'

	kmod_defaults_driver
	config_num_threads 1
	printf '\000' >"$DIR"/config_test_driver
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
	}

	kmod_test_0001_fs()
	{
	NAME='\000'

	kmod_defaults_fs
	config_num_threads 1
	printf '\000' >"$DIR"/config_test_fs
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} -EINVAL
	}

	kmod_test_0001()
	{
	kmod_test_0001_driver
	kmod_test_0001_fs
	}

	kmod_test_0002_driver()
	{
	NAME="nope-$DEFAULT_KMOD_DRIVER"

	kmod_defaults_driver
	config_set_driver $NAME
	config_num_threads 1
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
	}

	kmod_test_0002_fs()
	{
	NAME="nope-$DEFAULT_KMOD_FS"

	kmod_defaults_fs
	config_set_fs $NAME
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} -EINVAL
	}

	kmod_test_0002()
	{
	kmod_test_0002_driver
	kmod_test_0002_fs
	}

	kmod_test_0003()
	{
	kmod_defaults_fs
	config_num_threads 1
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	kmod_test_0004()
	{
	kmod_defaults_fs
	config_num_threads 2
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	kmod_test_0005()
	{
	kmod_defaults_driver
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	kmod_test_0006()
	{
	kmod_defaults_fs
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	kmod_test_0007()
	{
	kmod_test_0005
	kmod_test_0006
	}

	kmod_test_0008()
	{
	kmod_defaults_driver
	MODPROBE_LIMIT=$(config_get_modprobe_limit)
	let EXTRA=$MODPROBE_LIMIT/6
	config_num_thread_limit_extra $EXTRA
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	kmod_test_0009()
	{
	kmod_defaults_fs
	MODPROBE_LIMIT=$(config_get_modprobe_limit)
	let EXTRA=$MODPROBE_LIMIT/4
	config_num_thread_limit_extra $EXTRA
	config_trigger ${FUNCNAME[0]}
	config_expect_result ${FUNCNAME[0]} SUCCESS
	}

	list_tests()
	{
	echo "Test ID list:"
	echo
	echo "TEST_ID x NUM_TEST"
	echo "TEST_ID: Test ID"
	echo "NUM_TESTS: Number of recommended times to run the test"
	echo
	echo "0001 x $(get_test_count 0001) - Simple test - 1 thread for empty string"
	echo "0002 x $(get_test_count 0002) - Simple test - 1 thread for modules/filesystems that do not exist"
	echo "0003 x $(get_test_count 0003) - Simple test - 1 thread for get_fs_type() only"
	echo "0004 x $(get_test_count 0004) - Simple test - 2 threads for get_fs_type() only"
	echo "0005 x $(get_test_count 0005) - multithreaded tests with default setup - request_module() only"
	echo "0006 x $(get_test_count 0006) - multithreaded tests with default setup - get_fs_type() only"
	echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
	echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
	echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
	}

	usage()
	{
	NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" \| grep -c .)
	let NUM_TESTS=$NUM_TESTS+1
	MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
	echo "Usage: $0 [ -t <4-number-digit> ] \| [ -w <4-number-digit> ] \|"
	echo " [ -s <4-number-digit> ] \| [ -c <4-number-digit> <test- count>"
	echo " [ all ] [ -h \| --help ] [ -l ]"
	echo ""
	echo "Valid tests: 0001-$MAX_TEST"
	echo ""
	echo " all Runs all tests (default)"
	echo " -t Run test ID the number amount of times is recommended"
	echo " -w Watch test ID run until it runs into an error"
	echo " -c Run test ID once"
	echo " -s Run test ID x test-count number of times"
	echo " -l List all test ID list"
	echo " -h\|--help Help"
	echo
	echo "If an error every occurs execution will immediately terminate."
	echo "If you are adding a new test try using -w <test-ID> first to"
	echo "make sure the test passes a series of tests."
	echo
	echo Example uses:
	echo
	echo "${TEST_NAME}.sh -- executes all tests"
	echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recomended"
	echo "${TEST_NAME}.sh -w 0008 -- Watch test ID 0008 run until an error occurs"
	echo "${TEST_NAME}.sh -s 0008 -- Run test ID 0008 once"
	echo "${TEST_NAME}.sh -c 0008 3 -- Run test ID 0008 three times"
	echo
	list_tests
	exit 1
	}

	function test_num()
	{
	re='^[0-9]+$'
	if ! [[ $1 =~ $re ]]; then
	usage
	fi
	}

	function get_test_count()
	{
	test_num $1
	TEST_DATA=$(echo $ALL_TESTS \| awk '{print $'$1'}')
	LAST_TWO=${TEST_DATA#:}
	echo ${LAST_TWO%:*}
	}

	function get_test_enabled()
	{
	test_num $1
	TEST_DATA=$(echo $ALL_TESTS \| awk '{print $'$1'}')
	echo ${TEST_DATA#::}
	}

	function run_all_tests()
	{
	for i in $ALL_TESTS ; do
	TEST_ID=${i%::}
	ENABLED=$(get_test_enabled $TEST_ID)
	TEST_COUNT=$(get_test_count $TEST_ID)
	if [[ $ENABLED -eq "1" ]]; then
	test_case $TEST_ID $TEST_COUNT
	fi
	done
	}

	function watch_log()
	{
	if [ $# -ne 3 ]; then
	clear
	fi
	date
	echo "Running test: $2 - run #$1"
	}

	function watch_case()
	{
	i=0
	while [ 1 ]; do

	if [ $# -eq 1 ]; then
	test_num $1
	watch_log $i ${TEST_NAME}_test_$1
	${TEST_NAME}_test_$1
	else
	watch_log $i all
	run_all_tests
	fi
	let i=$i+1
	done
	}

	function test_case()
	{
	NUM_TESTS=$DEFAULT_NUM_TESTS
	if [ $# -eq 2 ]; then
	NUM_TESTS=$2
	fi

	i=0
	while [ $i -lt $NUM_TESTS ]; do
	test_num $1
	watch_log $i ${TEST_NAME}_test_$1 noclear
	RUN_TEST=${TEST_NAME}_test_$1
	$RUN_TEST
	let i=$i+1
	done
	}

	function parse_args()
	{
	if [ $# -eq 0 ]; then
	run_all_tests
	else
	if [[ "$1" = "all" ]]; then
	run_all_tests
	elif [[ "$1" = "-w" ]]; then
	shift
	watch_case $@
	elif [[ "$1" = "-t" ]]; then
	shift
	test_num $1
	test_case $1 $(get_test_count $1)
	elif [[ "$1" = "-c" ]]; then
	shift
	test_num $1
	test_num $2
	test_case $1 $2
	elif [[ "$1" = "-s" ]]; then
	shift
	test_case $1 1
	elif [[ "$1" = "-l" ]]; then
	list_tests
	elif [[ "$1" = "-h" \|\| "$1" = "--help" ]]; then
	usage
	else
	usage
	fi
	fi
	}

	test_reqs
	allow_user_defaults
	load_req_mod

	trap "test_finish" EXIT

	parse_args $@

	exit 0