x86, platforms: Remove SGI Visual Workstation
The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.
Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c33fc2..3c7f6db 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -517,19 +517,6 @@
depends on X86_64 || !SPARSEMEM
select ARCH_SUPPORTS_MEMORY_FAILURE
-config X86_VISWS
- bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
- depends on X86_32_NON_STANDARD
- ---help---
- The SGI Visual Workstation series is an IA32-based workstation
- based on SGI systems chips with some legacy PC hardware attached.
-
- Say Y here to create a kernel to run on the SGI 320 or 540.
-
- A kernel compiled for the Visual Workstation will run on general
- PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
config STA2X11
bool "STA2X11 Companion Chip Support"
depends on X86_32_NON_STANDARD && PCI
@@ -860,10 +847,6 @@
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
-config X86_VISWS_APIC
- def_bool y
- depends on X86_32 && X86_VISWS
-
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
bool "Reroute for broken boot IRQs"
depends on X86_IO_APIC
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 7252cd3..f690ee42 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -98,12 +98,6 @@
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
#endif
-#ifdef CONFIG_X86_VISWS_APIC
- FIX_CO_CPU, /* Cobalt timer */
- FIX_CO_APIC, /* Cobalt APIC Redirection Table */
- FIX_LI_PCIA, /* Lithium PCI Bridge A */
- FIX_LI_PCIB, /* Lithium PCI Bridge B */
-#endif
FIX_RO_IDT, /* Virtual mapping for read-only IDT */
#ifdef CONFIG_X86_32
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 67d69b8..a307b75 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -98,7 +98,6 @@
#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
extern unsigned long io_apic_irqs;
-extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d62c9f8..9264f04 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -39,12 +39,6 @@
void setup_bios_corruption_check(void);
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-#else
-static inline void visws_early_detect(void) { }
-#endif
-
extern unsigned long saved_video_mode;
extern void reserve_standard_io_resources(void);
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
deleted file mode 100644
index 2edb376..0000000
--- a/arch/x86/include/asm/visws/cobalt.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ASM_X86_VISWS_COBALT_H
-#define _ASM_X86_VISWS_COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define CO_CPU_PHYS 0xc2000000
-#define CO_APIC_PHYS 0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
-#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define CO_CPU_REV 0x08
-#define CO_CPU_CTRL 0x10
-#define CO_CPU_STAT 0x20
-#define CO_CPU_TIMEVAL 0x30
-
-/* CO_CPU_CTRL bits */
-#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
-#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define CO_TIME_HZ 100000000 /* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define CO_APIC_HI(n) (((n) * 0x10) + 4)
-#define CO_APIC_LO(n) ((n) * 0x10)
-#define CO_APIC_ID 0x0ffc
-
-/* CO_APIC_ID bits */
-#define CO_APIC_ENABLE 0x00000100
-
-/* CO_APIC_LO bits */
-#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
-#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define CO_APIC_IDE0 4
-#define CO_APIC_IDE1 2 /* Only on 320 */
-
-#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
-#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
-
-#define CO_APIC_PIIX4_USB 7 /* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
-#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
-
-#define CO_APIC_VIDOUT0 16
-#define CO_APIC_VIDOUT1 17
-#define CO_APIC_VIDIN0 18
-#define CO_APIC_VIDIN1 19
-
-#define CO_APIC_LI_AUDIO 22
-
-#define CO_APIC_AS 24
-#define CO_APIC_RE 25
-
-#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
-#define CO_APIC_NMI 29
-#define CO_APIC_LAST CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
-#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
-#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
-#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
-#define CO_IRQ_IDE0 14 /* knowledge of... */
-#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
-#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}
-
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}
-
-static inline unsigned long co_apic_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define VISWS_320 0
-#define VISWS_540 1
-
-extern char visws_board_rev;
-
-extern int pci_visws_init(void);
-
-#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
deleted file mode 100644
index a10d89b..0000000
--- a/arch/x86/include/asm/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_X86_VISWS_LITHIUM_H
-#define _ASM_X86_VISWS_LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
-#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN 0x46
-
-/* LI_PCI_INTENT bits */
-#define LI_INTA_0 0x0001
-#define LI_INTA_1 0x0002
-#define LI_INTA_2 0x0004
-#define LI_INTA_3 0x0008
-#define LI_INTA_4 0x0010
-#define LI_INTB 0x0020
-#define LI_INTC 0x0040
-#define LI_INTD 0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* _ASM_X86_VISWS_LITHIUM_H */
-
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
deleted file mode 100644
index d0af4d3..0000000
--- a/arch/x86/include/asm/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _ASM_X86_VISWS_PIIX4_H
-#define _ASM_X86_VISWS_PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define PIIX_PM_START 0x0F80
-
-#define SIO_GPIO_START 0x0FC0
-
-#define SIO_PM_START 0x0FC8
-
-#define PMBASE PIIX_PM_START
-#define GPIREG0 (PMBASE+0x30)
-#define GPIREG(x) (GPIREG0+((x)/8))
-#define GPIBIT(x) (1 << ((x)%8))
-
-#define PIIX_GPI_BD_ID1 18
-#define PIIX_GPI_BD_ID2 19
-#define PIIX_GPI_BD_ID3 20
-#define PIIX_GPI_BD_ID4 21
-#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
-#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
- GPIBIT(PIIX_GPI_BD_ID2) | \
- GPIBIT(PIIX_GPI_BD_ID3) | \
- GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
-
-#define SIO_INDEX 0x2e
-#define SIO_DATA 0x2f
-
-#define SIO_DEV_SEL 0x7
-#define SIO_DEV_ENB 0x30
-#define SIO_DEV_MSB 0x60
-#define SIO_DEV_LSB 0x61
-
-#define SIO_GP_DEV 0x7
-
-#define SIO_GP_BASE SIO_GPIO_START
-#define SIO_GP_MSB (SIO_GP_BASE>>8)
-#define SIO_GP_LSB (SIO_GP_BASE&0xff)
-
-#define SIO_GP_DATA1 (SIO_GP_BASE+0)
-
-#define SIO_PM_DEV 0x8
-
-#define SIO_PM_BASE SIO_PM_START
-#define SIO_PM_MSB (SIO_PM_BASE>>8)
-#define SIO_PM_LSB (SIO_PM_BASE&0xff)
-#define SIO_PM_INDEX (SIO_PM_BASE+0)
-#define SIO_PM_DATA (SIO_PM_BASE+1)
-
-#define SIO_PM_FER2 0x1
-
-#define SIO_PM_GP_EN 0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV 0xff
-#define SPECIAL_REG 0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state. PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP 0x00120002
-
-#define PIIX4_RESET_PORT 0xcf9
-#define PIIX4_RESET_VAL 0x6
-
-#define PMSTS_PORT 0xf80 // 2 bytes PM Status
-#define PMEN_PORT 0xf82 // 2 bytes PM Enable
-#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
-
-#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM (1<<15) // Resume Status
-#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
-#define PM_STS_RTC (1<<10) // RTC status
-#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
-#define PM_STS_GBL (1<<5) // Global Status
-#define PM_STS_BM (1<<4) // Bus Master Status
-#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0 (0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
-
-#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
deleted file mode 100644
index 5fbf63e..0000000
--- a/arch/x86/include/asm/visws/sgivw.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Frame buffer position and size:
- */
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f824d69..9edae8a 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2132,7 +2132,6 @@
*
* - arch/x86/kernel/mpparse.c: MP_processor_info()
* - arch/x86/mm/amdtopology.c: amd_numa_init()
- * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info()
*
* This function is executed with the modified
* boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 06853e6..12907ab 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -869,7 +869,6 @@
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
- visws_early_detect();
/*
* copy kernel address range established so far and switch
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e063eed..758b827 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,8 +13,6 @@
obj-$(CONFIG_STA2X11) += sta2x11-fixup.o
-obj-$(CONFIG_X86_VISWS) += visws.o
-
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 981c2db..ed11916 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -561,7 +561,6 @@
pci_probe |= PCI_PROBE_NOEARLY;
return NULL;
}
-#ifndef CONFIG_X86_VISWS
else if (!strcmp(str, "usepirqmask")) {
pci_probe |= PCI_USE_PIRQ_MASK;
return NULL;
@@ -571,9 +570,7 @@
} else if (!strncmp(str, "lastbus=", 8)) {
pcibios_last_bus = simple_strtol(str+8, NULL, 0);
return NULL;
- }
-#endif
- else if (!strcmp(str, "rom")) {
+ } else if (!strcmp(str, "rom")) {
pci_probe |= PCI_ASSIGN_ROMS;
return NULL;
} else if (!strcmp(str, "norom")) {
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
deleted file mode 100644
index 3e6d2a6..0000000
--- a/arch/x86/pci/visws.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Low-Level PCI Support for SGI Visual Workstation
- *
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/pci_x86.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
-static void pci_visws_disable_irq(struct pci_dev *dev) { }
-
-/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
-/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
-
-/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
-
-
-unsigned int pci_bus0, pci_bus1;
-
-static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq, bus = dev->bus->number;
-
- pin--;
-
- /* Nothing useful at PIIX4 pin 1 */
- if (bus == pci_bus0 && slot == 4 && pin == 0)
- return -1;
-
- /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
- if (bus == pci_bus0 && slot == 4 && pin == 3) {
- irq = CO_IRQ(CO_APIC_PIIX4_USB);
- goto out;
- }
-
- /* First pin spread down 1 APIC entry per slot */
- if (pin == 0) {
- irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
- CO_APIC_PCIA_BASE0) + slot);
- goto out;
- }
-
- /* lines 1,2,3 from any slot is shared in this twirly pattern */
- if (bus == pci_bus1) {
- /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
- irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
- } else { /* bus == pci_bus0 */
- /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
- if (slot == 0)
- slot = 3; /* same pattern */
- irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
- }
-out:
- printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
- return irq;
-}
-
-int __init pci_visws_init(void)
-{
- pcibios_enable_irq = &pci_visws_enable_irq;
- pcibios_disable_irq = &pci_visws_disable_irq;
-
- /* The VISWS supports configuration access type 1 only */
- pci_probe = (pci_probe | PCI_PROBE_CONF1) &
- ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
-
- pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
- pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
-
- printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
- "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
-
- raw_pci_ops = &pci_direct_conf1;
- pci_scan_bus_with_sysdata(pci_bus0);
- pci_scan_bus_with_sysdata(pci_bus1);
- pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
- pcibios_resource_survey();
- /* Request bus scan */
- return 1;
-}
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 20342d4..85afde1 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -9,5 +9,4 @@
obj-y += scx200/
obj-y += sfi/
obj-y += ts5500/
-obj-y += visws/
obj-y += uv/
diff --git a/arch/x86/platform/visws/Makefile b/arch/x86/platform/visws/Makefile
deleted file mode 100644
index 91bc17a..0000000
--- a/arch/x86/platform/visws/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_X86_VISWS) += visws_quirks.o
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
deleted file mode 100644
index 94d8a39..0000000
--- a/arch/x86/platform/visws/visws_quirks.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- * SGI Visual Workstation support and quirks, unmaintained.
- *
- * Split out from setup.c by davej@suse.de
- *
- * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- * SGI Visual Workstation interrupt controller
- *
- * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- * which serves as the main interrupt controller in the system. Non-legacy
- * hardware in the system uses this controller directly. Legacy devices
- * are connected to the PIIX4 which in turn has its 8259(s) connected to
- * a of the Cobalt APIC entry.
- *
- * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/io_apic.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <linux/kernel_stat.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/lithium.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-extern int no_broadcast;
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-static void __init visws_time_init(void)
-{
- printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
- /* Set the countdown value */
- co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
- /* Start the timer */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
- /* Enable (unmask) the timer interrupt */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
- setup_default_timer_irq();
-}
-
-/* Replaces the default init_ISA_irqs in the generic setup */
-static void __init visws_pre_intr_init(void);
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup(void)
-{
- long long gfx_mem_size = 8 * MB;
-
- mem_size = boot_params.alt_mem_k;
-
- if (!mem_size) {
- printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
- mem_size = 128 * MB;
- }
-
- /*
- * this hardcodes the graphics memory to 8 MB
- * it really should be sized dynamically (or at least
- * set as a boot param)
- */
- if (!sgivwfb_mem_size) {
- printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
- sgivwfb_mem_size = 8 * MB;
- }
-
- /*
- * Trim to nearest MB
- */
- sgivwfb_mem_size &= ~((1 << 20) - 1);
- sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
- e820_add_region(0, LOWMEMSIZE(), E820_RAM);
- e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
- e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
- return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
- /*
- * Visual Workstations restart after this
- * register is poked on the PIIX4
- */
- outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
- unsigned short pm_status;
-/* extern unsigned int pci_bus0; */
-
- while ((pm_status = inw(PMSTS_PORT)) & 0x100)
- outw(pm_status, PMSTS_PORT);
-
- outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
- mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
- outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static void __init visws_get_smp_config(unsigned int early)
-{
-}
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info(struct mpc_cpu *m)
-{
- int ver, logical_apicid;
- physid_mask_t apic_cpus;
-
- if (!(m->cpuflag & CPU_ENABLED))
- return;
-
- logical_apicid = m->apicid;
- printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
- m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
- m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
-
- if (m->cpuflag & CPU_BOOTPROCESSOR)
- boot_cpu_physical_apicid = m->apicid;
-
- ver = m->apicver;
- if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->apicid, MAX_LOCAL_APIC);
- return;
- }
-
- apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->apicid);
- ver = 0x10;
- }
- apic_version[m->apicid] = ver;
-}
-
-static void __init visws_find_smp_config(void)
-{
- struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
- unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
- if (ncpus > CO_CPU_MAX) {
- printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
- ncpus, mp);
-
- ncpus = CO_CPU_MAX;
- }
-
- if (ncpus > setup_max_cpus)
- ncpus = setup_max_cpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- smp_found_config = 1;
-#endif
- while (ncpus--)
- MP_processor_info(mp++);
-
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-static void visws_trap_init(void);
-
-void __init visws_early_detect(void)
-{
- int raw;
-
- visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
- >> PIIX_GPI_BD_SHIFT;
-
- if (visws_board_type < 0)
- return;
-
- /*
- * Override the default platform setup functions
- */
- x86_init.resources.memory_setup = visws_memory_setup;
- x86_init.mpparse.get_smp_config = visws_get_smp_config;
- x86_init.mpparse.find_smp_config = visws_find_smp_config;
- x86_init.irqs.pre_vector_init = visws_pre_intr_init;
- x86_init.irqs.trap_init = visws_trap_init;
- x86_init.timers.timer_init = visws_time_init;
- x86_init.pci.init = pci_visws_init;
- x86_init.pci.init_irq = x86_init_noop;
-
- /*
- * Install reboot quirks:
- */
- pm_power_off = visws_machine_power_off;
- machine_ops.emergency_restart = visws_machine_emergency_restart;
-
- /*
- * Do not use broadcast IPIs:
- */
- no_broadcast = 0;
-
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Turn off IO-APIC detection and initialization:
- */
- skip_ioapic_setup = 1;
-#endif
-
- /*
- * Get Board rev.
- * First, we have to initialize the 307 part to allow us access
- * to the GPIO registers. Let's map them at 0x0fc0 which is right
- * after the PIIX4 PM section.
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable GPIO registers. */
-
- /*
- * Now, we have to map the power management section to write
- * a bit which enables access to the GPIO registers.
- * What lunatic came up with this shit?
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable PM registers. */
-
- /*
- * Now, write the PM register which enables the GPIO registers.
- */
- outb_p(SIO_PM_FER2, SIO_PM_INDEX);
- outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
- /*
- * Now, initialize the GPIO registers.
- * We want them all to be inputs which is the
- * power on default, so let's leave them alone.
- * So, let's just read the board rev!
- */
- raw = inb_p(SIO_GP_DATA1);
- raw &= 0x7f; /* 7 bits of valid board revision ID. */
-
- if (visws_board_type == VISWS_320) {
- if (raw < 0x6) {
- visws_board_rev = 4;
- } else if (raw < 0xc) {
- visws_board_rev = 5;
- } else {
- visws_board_rev = 6;
- }
- } else if (visws_board_type == VISWS_540) {
- visws_board_rev = 2;
- } else {
- visws_board_rev = raw;
- }
-
- printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
- (visws_board_type == VISWS_320 ? "320" :
- (visws_board_type == VISWS_540 ? "540" :
- "unknown")), visws_board_rev);
-}
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
- set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
- set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
- if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
- li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
- /*
- * On normal SMP PC this is used only with SMP, but we have to
- * use it and set it up here to start the Cobalt clock
- */
- set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
- setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
- (unsigned int)apic_read(APIC_LVR),
- (unsigned int)apic_read(APIC_ID));
-
- set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
- set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
- printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
- co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
- /* Enable Cobalt APIC being careful to NOT change the ID! */
- co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
- printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
- co_apic_read(CO_APIC_ID));
-}
-
-static void __init visws_trap_init(void)
-{
- lithium_init();
- cobalt_init();
-}
-
-/*
- * IRQ controller / APIC support:
- */
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
- co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
- extern char visws_board_type;
- extern char visws_board_rev;
-
- if (visws_board_type == VISWS_320 && visws_board_rev == 5)
- return 5;
- return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
- if (IS_CO_APIC(irq))
- return CO_APIC(irq);
-
- switch (irq) {
- case 0: return CO_APIC_CPU;
- case CO_IRQ_IDE0: return co_apic_ide0_hack();
- case CO_IRQ_IDE1: return CO_APIC_IDE1;
- default: return -1;
- }
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-static void enable_cobalt_irq(struct irq_data *data)
-{
- co_apic_set(is_co_apic(data->irq), data->irq);
-}
-
-static void disable_cobalt_irq(struct irq_data *data)
-{
- int entry = is_co_apic(data->irq);
-
- co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
- co_apic_read(CO_APIC_LO(entry));
-}
-
-static void ack_cobalt_irq(struct irq_data *data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- disable_cobalt_irq(data);
- apic_write(APIC_EOI, APIC_EOI_ACK);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
- .name = "Cobalt-APIC",
- .irq_enable = enable_cobalt_irq,
- .irq_disable = disable_cobalt_irq,
- .irq_ack = ack_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(struct irq_data *data)
-{
- legacy_pic->init(0);
- enable_cobalt_irq(data);
- return 0;
-}
-
-static struct irq_chip piix4_master_irq_type = {
- .name = "PIIX4-master",
- .irq_startup = startup_piix4_master_irq,
- .irq_ack = ack_cobalt_irq,
-};
-
-static void pii4_mask(struct irq_data *data) { }
-
-static struct irq_chip piix4_virtual_irq_type = {
- .name = "PIIX4-virtual",
- .irq_mask = pii4_mask,
-};
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
- unsigned long flags;
- int realirq;
-
- raw_spin_lock_irqsave(&i8259A_lock, flags);
-
- /* Find out what's interrupting in the PIIX4 master 8259 */
- outb(0x0c, 0x20); /* OCW3 Poll command */
- realirq = inb(0x20);
-
- /*
- * Bit 7 == 0 means invalid/spurious
- */
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq &= 7;
-
- if (unlikely(realirq == 2)) {
- outb(0x0c, 0xa0);
- realirq = inb(0xa0);
-
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq = (realirq & 7) + 8;
- }
-
- /* mask and ack interrupt */
- cached_irq_mask |= 1 << realirq;
- if (unlikely(realirq > 7)) {
- inb(0xa1);
- outb(cached_slave_mask, 0xa1);
- outb(0x60 + (realirq & 7), 0xa0);
- outb(0x60 + 2, 0x20);
- } else {
- inb(0x21);
- outb(cached_master_mask, 0x21);
- outb(0x60 + realirq, 0x20);
- }
-
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
- /*
- * handle this 'virtual interrupt' as a Cobalt one now.
- */
- generic_handle_irq(realirq);
-
- return IRQ_HANDLED;
-
-out_unlock:
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
- return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
- .handler = piix4_master_intr,
- .name = "PIIX4-8259",
- .flags = IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "cascade",
- .flags = IRQF_NO_THREAD,
-};
-
-static inline void set_piix4_virtual_irq_type(void)
-{
- piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask;
- piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask;
- piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask;
-}
-
-static void __init visws_pre_intr_init(void)
-{
- int i;
-
- set_piix4_virtual_irq_type();
-
- for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
- struct irq_chip *chip = NULL;
-
- if (i == 0)
- chip = &cobalt_irq_type;
- else if (i == CO_IRQ_IDE0)
- chip = &cobalt_irq_type;
- else if (i == CO_IRQ_IDE1)
- chip = &cobalt_irq_type;
- else if (i == CO_IRQ_8259)
- chip = &piix4_master_irq_type;
- else if (i < CO_IRQ_APIC0)
- chip = &piix4_virtual_irq_type;
- else if (IS_CO_APIC(i))
- chip = &cobalt_irq_type;
-
- if (chip)
- irq_set_chip(i, chip);
- }
-
- setup_irq(CO_IRQ_8259, &master_action);
- setup_irq(2, &cascade_action);
-}
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 01b9026..9c50cc2 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -7,7 +7,7 @@
depends on PARAVIRT
select PARAVIRT_CLOCK
select XEN_HAVE_PVMMU
- depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS)
+ depends on X86_64 || (X86_32 && X86_PAE)
depends on X86_TSC
help
This is the Linux Xen port. Enabling this will allow the