Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / c619581a7903fadccb900d1d497d2366fdf7da9d / . / drivers / bluetooth / btmrvl_sdio.c
blob: d3a4acdf98c9d17071cff47879e19819a73c694d [file] [log] [blame]
/**
* Marvell BT-over-SDIO driver: SDIO interface related functions.
*
* Copyright (C) 2009, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
**/
#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio_func.h>
#include <linux/module.h>
#include <linux/devcoredump.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btmrvl_drv.h"
#include "btmrvl_sdio.h"
#define VERSION "1.0"
static struct memory_type_mapping mem_type_mapping_tbl[] = {
{"ITCM", NULL, 0, 0xF0},
{"DTCM", NULL, 0, 0xF1},
{"SQRAM", NULL, 0, 0xF2},
{"APU", NULL, 0, 0xF3},
{"CIU", NULL, 0, 0xF4},
{"ICU", NULL, 0, 0xF5},
{"MAC", NULL, 0, 0xF6},
{"EXT7", NULL, 0, 0xF7},
{"EXT8", NULL, 0, 0xF8},
{"EXT9", NULL, 0, 0xF9},
{"EXT10", NULL, 0, 0xFA},
{"EXT11", NULL, 0, 0xFB},
{"EXT12", NULL, 0, 0xFC},
{"EXT13", NULL, 0, 0xFD},
{"EXTLAST", NULL, 0, 0xFE},
};
/* The btmrvl_sdio_remove() callback function is called
* when user removes this module from kernel space or ejects
* the card from the slot. The driver handles these 2 cases
* differently.
* If the user is removing the module, a MODULE_SHUTDOWN_REQ
* command is sent to firmware and interrupt will be disabled.
* If the card is removed, there is no need to send command
* or disable interrupt.
*
* The variable 'user_rmmod' is used to distinguish these two
* scenarios. This flag is initialized as FALSE in case the card
* is removed, and will be set to TRUE for module removal when
* module_exit function is called.
*/
static u8 user_rmmod;
static u8 sdio_ireg;
static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
.cfg = 0x03,
.host_int_mask = 0x04,
.host_intstatus = 0x05,
.card_status = 0x20,
.sq_read_base_addr_a0 = 0x10,
.sq_read_base_addr_a1 = 0x11,
.card_fw_status0 = 0x40,
.card_fw_status1 = 0x41,
.card_rx_len = 0x42,
.card_rx_unit = 0x43,
.io_port_0 = 0x00,
.io_port_1 = 0x01,
.io_port_2 = 0x02,
.int_read_to_clear = false,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
.card_status = 0x30,
.sq_read_base_addr_a0 = 0x40,
.sq_read_base_addr_a1 = 0x41,
.card_revision = 0x5c,
.card_fw_status0 = 0x60,
.card_fw_status1 = 0x61,
.card_rx_len = 0x62,
.card_rx_unit = 0x63,
.io_port_0 = 0x78,
.io_port_1 = 0x79,
.io_port_2 = 0x7a,
.int_read_to_clear = false,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8887 = {
.cfg = 0x00,
.host_int_mask = 0x08,
.host_intstatus = 0x0C,
.card_status = 0x5C,
.sq_read_base_addr_a0 = 0x6C,
.sq_read_base_addr_a1 = 0x6D,
.card_revision = 0xC8,
.card_fw_status0 = 0x88,
.card_fw_status1 = 0x89,
.card_rx_len = 0x8A,
.card_rx_unit = 0x8B,
.io_port_0 = 0xE4,
.io_port_1 = 0xE5,
.io_port_2 = 0xE6,
.int_read_to_clear = true,
.host_int_rsr = 0x04,
.card_misc_cfg = 0xD8,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
.card_status = 0x50,
.sq_read_base_addr_a0 = 0x60,
.sq_read_base_addr_a1 = 0x61,
.card_revision = 0xbc,
.card_fw_status0 = 0xc0,
.card_fw_status1 = 0xc1,
.card_rx_len = 0xc2,
.card_rx_unit = 0xc3,
.io_port_0 = 0xd8,
.io_port_1 = 0xd9,
.io_port_2 = 0xda,
.int_read_to_clear = true,
.host_int_rsr = 0x01,
.card_misc_cfg = 0xcc,
.fw_dump_ctrl = 0xe2,
.fw_dump_start = 0xe3,
.fw_dump_end = 0xea,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
.cfg = 0x00,
.host_int_mask = 0x08,
.host_intstatus = 0x0c,
.card_status = 0x5c,
.sq_read_base_addr_a0 = 0xf8,
.sq_read_base_addr_a1 = 0xf9,
.card_revision = 0xc8,
.card_fw_status0 = 0xe8,
.card_fw_status1 = 0xe9,
.card_rx_len = 0xea,
.card_rx_unit = 0xeb,
.io_port_0 = 0xe4,
.io_port_1 = 0xe5,
.io_port_2 = 0xe6,
.int_read_to_clear = true,
.host_int_rsr = 0x04,
.card_misc_cfg = 0xD8,
.fw_dump_ctrl = 0xf0,
.fw_dump_start = 0xf1,
.fw_dump_end = 0xf8,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
.reg = &btmrvl_reg_8688,
.support_pscan_win_report = false,
.sd_blksz_fw_dl = 64,
.supports_fw_dump = false,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
.reg = &btmrvl_reg_87xx,
.support_pscan_win_report = false,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = false,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.helper = NULL,
.firmware = "mrvl/sd8797_uapsta.bin",
.reg = &btmrvl_reg_87xx,
.support_pscan_win_report = false,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = false,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8887 = {
.helper = NULL,
.firmware = "mrvl/sd8887_uapsta.bin",
.reg = &btmrvl_reg_8887,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = false,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.helper = NULL,
.firmware = "mrvl/sd8897_uapsta.bin",
.reg = &btmrvl_reg_8897,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = true,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
.helper = NULL,
.firmware = "mrvl/sd8997_uapsta.bin",
.reg = &btmrvl_reg_8997,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
.supports_fw_dump = true,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
.driver_data = (unsigned long)&btmrvl_sdio_sd8688 },
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
/* Marvell SD8787 Bluetooth AMP device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911B),
.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long)&btmrvl_sdio_sd8797 },
/* Marvell SD8887 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9136),
.driver_data = (unsigned long)&btmrvl_sdio_sd8887 },
/* Marvell SD8897 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
/* Marvell SD8997 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
{
u8 reg;
int ret;
reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
if (!ret)
card->rx_unit = reg;
return ret;
}
static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
{
u8 fws0, fws1;
int ret;
*dat = 0;
fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret)
return -EIO;
fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
if (ret)
return -EIO;
*dat = (((u16) fws1) << 8) | fws0;
return 0;
}
static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
{
u8 reg;
int ret;
reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
if (!ret)
*dat = (u16) reg << card->rx_unit;
return ret;
}
static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
u8 mask)
{
int ret;
sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
if (ret) {
BT_ERR("Unable to enable the host interrupt!");
ret = -EIO;
}
return ret;
}
static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
u8 mask)
{
u8 host_int_mask;
int ret;
host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
if (ret)
return -EIO;
host_int_mask &= ~mask;
sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
if (ret < 0) {
BT_ERR("Unable to disable the host interrupt!");
return -EIO;
}
return 0;
}
static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
{
unsigned int tries;
u8 status;
int ret;
for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
status = sdio_readb(card->func, card->reg->card_status, &ret);
if (ret)
goto failed;
if ((status & bits) == bits)
return ret;
udelay(1);
}
ret = -ETIMEDOUT;
failed:
BT_ERR("FAILED! ret=%d", ret);
return ret;
}
static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
int pollnum)
{
u16 firmwarestat;
int tries, ret;
/* Wait for firmware to become ready */
for (tries = 0; tries < pollnum; tries++) {
sdio_claim_host(card->func);
ret = btmrvl_sdio_read_fw_status(card, &firmwarestat);
sdio_release_host(card->func);
if (ret < 0)
continue;
if (firmwarestat == FIRMWARE_READY)
return 0;
msleep(10);
}
return -ETIMEDOUT;
}
static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
{
const struct firmware *fw_helper = NULL;
const u8 *helper = NULL;
int ret;
void *tmphlprbuf = NULL;
int tmphlprbufsz, hlprblknow, helperlen;
u8 *helperbuf;
u32 tx_len;
ret = request_firmware(&fw_helper, card->helper,
&card->func->dev);
if ((ret < 0) || !fw_helper) {
BT_ERR("request_firmware(helper) failed, error code = %d",
ret);
ret = -ENOENT;
goto done;
}
helper = fw_helper->data;
helperlen = fw_helper->size;
BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
helperlen, SDIO_BLOCK_SIZE);
tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
tmphlprbuf = kzalloc(tmphlprbufsz, GFP_KERNEL);
if (!tmphlprbuf) {
BT_ERR("Unable to allocate buffer for helper."
" Terminating download");
ret = -ENOMEM;
goto done;
}
helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
/* Perform helper data transfer */
tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
- SDIO_HEADER_LEN;
hlprblknow = 0;
do {
ret = btmrvl_sdio_poll_card_status(card,
CARD_IO_READY | DN_LD_CARD_RDY);
if (ret < 0) {
BT_ERR("Helper download poll status timeout @ %d",
hlprblknow);
goto done;
}
/* Check if there is more data? */
if (hlprblknow >= helperlen)
break;
if (helperlen - hlprblknow < tx_len)
tx_len = helperlen - hlprblknow;
/* Little-endian */
helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
helperbuf[3] = ((tx_len & 0xff000000) >> 24);
memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
tx_len);
/* Now send the data */
ret = sdio_writesb(card->func, card->ioport, helperbuf,
FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE);
if (ret < 0) {
BT_ERR("IO error during helper download @ %d",
hlprblknow);
goto done;
}
hlprblknow += tx_len;
} while (true);
BT_DBG("Transferring helper image EOF block");
memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
ret = sdio_writesb(card->func, card->ioport, helperbuf,
SDIO_BLOCK_SIZE);
if (ret < 0) {
BT_ERR("IO error in writing helper image EOF block");
goto done;
}
ret = 0;
done:
kfree(tmphlprbuf);
release_firmware(fw_helper);
return ret;
}
static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
{
const struct firmware *fw_firmware = NULL;
const u8 *firmware = NULL;
int firmwarelen, tmpfwbufsz, ret;
unsigned int tries, offset;
u8 base0, base1;
void *tmpfwbuf = NULL;
u8 *fwbuf;
u16 len, blksz_dl = card->sd_blksz_fw_dl;
int txlen = 0, tx_blocks = 0, count = 0;
ret = request_firmware(&fw_firmware, card->firmware,
&card->func->dev);
if ((ret < 0) || !fw_firmware) {
BT_ERR("request_firmware(firmware) failed, error code = %d",
ret);
ret = -ENOENT;
goto done;
}
firmware = fw_firmware->data;
firmwarelen = fw_firmware->size;
BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
tmpfwbuf = kzalloc(tmpfwbufsz, GFP_KERNEL);
if (!tmpfwbuf) {
BT_ERR("Unable to allocate buffer for firmware."
" Terminating download");
ret = -ENOMEM;
goto done;
}
/* Ensure aligned firmware buffer */
fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
/* Perform firmware data transfer */
offset = 0;
do {
ret = btmrvl_sdio_poll_card_status(card,
CARD_IO_READY | DN_LD_CARD_RDY);
if (ret < 0) {
BT_ERR("FW download with helper poll status"
" timeout @ %d", offset);
goto done;
}
/* Check if there is more data ? */
if (offset >= firmwarelen)
break;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
base0 = sdio_readb(card->func,
card->reg->sq_read_base_addr_a0, &ret);
if (ret) {
BT_ERR("BASE0 register read failed:"
" base0 = 0x%04X(%d)."
" Terminating download",
base0, base0);
ret = -EIO;
goto done;
}
base1 = sdio_readb(card->func,
card->reg->sq_read_base_addr_a1, &ret);
if (ret) {
BT_ERR("BASE1 register read failed:"
" base1 = 0x%04X(%d)."
" Terminating download",
base1, base1);
ret = -EIO;
goto done;
}
len = (((u16) base1) << 8) | base0;
if (len)
break;
udelay(10);
}
if (!len)
break;
else if (len > BTM_UPLD_SIZE) {
BT_ERR("FW download failure @%d, invalid length %d",
offset, len);
ret = -EINVAL;
goto done;
}
txlen = len;
if (len & BIT(0)) {
count++;
if (count > MAX_WRITE_IOMEM_RETRY) {
BT_ERR("FW download failure @%d, "
"over max retry count", offset);
ret = -EIO;
goto done;
}
BT_ERR("FW CRC error indicated by the helper: "
"len = 0x%04X, txlen = %d", len, txlen);
len &= ~BIT(0);
/* Set txlen to 0 so as to resend from same offset */
txlen = 0;
} else {
count = 0;
/* Last block ? */
if (firmwarelen - offset < txlen)
txlen = firmwarelen - offset;
tx_blocks = DIV_ROUND_UP(txlen, blksz_dl);
memcpy(fwbuf, &firmware[offset], txlen);
}
ret = sdio_writesb(card->func, card->ioport, fwbuf,
tx_blocks * blksz_dl);
if (ret < 0) {
BT_ERR("FW download, writesb(%d) failed @%d",
count, offset);
sdio_writeb(card->func, HOST_CMD53_FIN,
card->reg->cfg, &ret);
if (ret)
BT_ERR("writeb failed (CFG)");
}
offset += txlen;
} while (true);
BT_INFO("FW download over, size %d bytes", offset);
ret = 0;
done:
kfree(tmpfwbuf);
release_firmware(fw_firmware);
return ret;
}
static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
{
u16 buf_len = 0;
int ret, num_blocks, blksz;
struct sk_buff *skb = NULL;
u32 type;
u8 *payload = NULL;
struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
ret = -EINVAL;
goto exit;
}
/* Read the length of data to be transferred */
ret = btmrvl_sdio_read_rx_len(card, &buf_len);
if (ret < 0) {
BT_ERR("read rx_len failed");
ret = -EIO;
goto exit;
}
blksz = SDIO_BLOCK_SIZE;
num_blocks = DIV_ROUND_UP(buf_len, blksz);
if (buf_len <= SDIO_HEADER_LEN
|| (num_blocks * blksz) > ALLOC_BUF_SIZE) {
BT_ERR("invalid packet length: %d", buf_len);
ret = -EINVAL;
goto exit;
}
/* Allocate buffer */
skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
if (!skb) {
BT_ERR("No free skb");
ret = -ENOMEM;
goto exit;
}
if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
skb_put(skb, (unsigned long) skb->data &
(BTSDIO_DMA_ALIGN - 1));
skb_pull(skb, (unsigned long) skb->data &
(BTSDIO_DMA_ALIGN - 1));
}
payload = skb->data;
ret = sdio_readsb(card->func, payload, card->ioport,
num_blocks * blksz);
if (ret < 0) {
BT_ERR("readsb failed: %d", ret);
ret = -EIO;
goto exit;
}
/* This is SDIO specific header length: byte[2][1][0], type: byte[3]
* (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
*/
buf_len = payload[0];
buf_len |= payload[1] << 8;
buf_len |= payload[2] << 16;
if (buf_len > blksz * num_blocks) {
BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
buf_len, blksz * num_blocks);
ret = -EIO;
goto exit;
}
type = payload[3];
switch (type) {
case HCI_ACLDATA_PKT:
case HCI_SCODATA_PKT:
case HCI_EVENT_PKT:
hci_skb_pkt_type(skb) = type;
skb_put(skb, buf_len);
skb_pull(skb, SDIO_HEADER_LEN);
if (type == HCI_EVENT_PKT) {
if (btmrvl_check_evtpkt(priv, skb))
hci_recv_frame(hdev, skb);
} else {
hci_recv_frame(hdev, skb);
}
hdev->stat.byte_rx += buf_len;
break;
case MRVL_VENDOR_PKT:
hci_skb_pkt_type(skb) = HCI_VENDOR_PKT;
skb_put(skb, buf_len);
skb_pull(skb, SDIO_HEADER_LEN);
if (btmrvl_process_event(priv, skb))
hci_recv_frame(hdev, skb);
hdev->stat.byte_rx += buf_len;
break;
default:
BT_ERR("Unknown packet type:%d", type);
BT_ERR("hex: %*ph", blksz * num_blocks, payload);
kfree_skb(skb);
skb = NULL;
break;
}
exit:
if (ret) {
hdev->stat.err_rx++;
kfree_skb(skb);
}
return ret;
}
static int btmrvl_sdio_process_int_status(struct btmrvl_private *priv)
{
ulong flags;
u8 ireg;
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
spin_lock_irqsave(&priv->driver_lock, flags);
ireg = sdio_ireg;
sdio_ireg = 0;
spin_unlock_irqrestore(&priv->driver_lock, flags);
sdio_claim_host(card->func);
if (ireg & DN_LD_HOST_INT_STATUS) {
if (priv->btmrvl_dev.tx_dnld_rdy)
BT_DBG("tx_done already received: "
" int_status=0x%x", ireg);
else
priv->btmrvl_dev.tx_dnld_rdy = true;
}
if (ireg & UP_LD_HOST_INT_STATUS)
btmrvl_sdio_card_to_host(priv);
sdio_release_host(card->func);
return 0;
}
static int btmrvl_sdio_read_to_clear(struct btmrvl_sdio_card *card, u8 *ireg)
{
struct btmrvl_adapter *adapter = card->priv->adapter;
int ret;
ret = sdio_readsb(card->func, adapter->hw_regs, 0, SDIO_BLOCK_SIZE);
if (ret) {
BT_ERR("sdio_readsb: read int hw_regs failed: %d", ret);
return ret;
}
*ireg = adapter->hw_regs[card->reg->host_intstatus];
BT_DBG("hw_regs[%#x]=%#x", card->reg->host_intstatus, *ireg);
return 0;
}
static int btmrvl_sdio_write_to_clear(struct btmrvl_sdio_card *card, u8 *ireg)
{
int ret;
*ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_readb: read int status failed: %d", ret);
return ret;
}
if (*ireg) {
/*
* DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
* Clear the interrupt status register and re-enable the
* interrupt.
*/
BT_DBG("int_status = 0x%x", *ireg);
sdio_writeb(card->func, ~(*ireg) & (DN_LD_HOST_INT_STATUS |
UP_LD_HOST_INT_STATUS),
card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_writeb: clear int status failed: %d", ret);
return ret;
}
}
return 0;
}
static void btmrvl_sdio_interrupt(struct sdio_func *func)
{
struct btmrvl_private *priv;
struct btmrvl_sdio_card *card;
ulong flags;
u8 ireg = 0;
int ret;
card = sdio_get_drvdata(func);
if (!card || !card->priv) {
BT_ERR("sbi_interrupt(%p) card or priv is NULL, card=%p",
func, card);
return;
}
priv = card->priv;
if (priv->surprise_removed)
return;
if (card->reg->int_read_to_clear)
ret = btmrvl_sdio_read_to_clear(card, &ireg);
else
ret = btmrvl_sdio_write_to_clear(card, &ireg);
if (ret)
return;
spin_lock_irqsave(&priv->driver_lock, flags);
sdio_ireg |= ireg;
spin_unlock_irqrestore(&priv->driver_lock, flags);
btmrvl_interrupt(priv);
}
static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
{
struct sdio_func *func;
u8 reg;
int ret = 0;
if (!card || !card->func) {
BT_ERR("Error: card or function is NULL!");
ret = -EINVAL;
goto failed;
}
func = card->func;
sdio_claim_host(func);
ret = sdio_enable_func(func);
if (ret) {
BT_ERR("sdio_enable_func() failed: ret=%d", ret);
ret = -EIO;
goto release_host;
}
ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
if (ret) {
BT_ERR("sdio_claim_irq failed: ret=%d", ret);
ret = -EIO;
goto disable_func;
}
ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
if (ret) {
BT_ERR("cannot set SDIO block size");
ret = -EIO;
goto release_irq;
}
reg = sdio_readb(func, card->reg->io_port_0, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
card->ioport = reg;
reg = sdio_readb(func, card->reg->io_port_1, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
card->ioport |= (reg << 8);
reg = sdio_readb(func, card->reg->io_port_2, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
card->ioport |= (reg << 16);
BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
if (card->reg->int_read_to_clear) {
reg = sdio_readb(func, card->reg->host_int_rsr, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
sdio_writeb(func, reg | 0x3f, card->reg->host_int_rsr, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
reg = sdio_readb(func, card->reg->card_misc_cfg, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
sdio_writeb(func, reg | 0x10, card->reg->card_misc_cfg, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
}
}
sdio_set_drvdata(func, card);
sdio_release_host(func);
return 0;
release_irq:
sdio_release_irq(func);
disable_func:
sdio_disable_func(func);
release_host:
sdio_release_host(func);
failed:
return ret;
}
static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
{
if (card && card->func) {
sdio_claim_host(card->func);
sdio_release_irq(card->func);
sdio_disable_func(card->func);
sdio_release_host(card->func);
sdio_set_drvdata(card->func, NULL);
}
return 0;
}
static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
{
int ret;
if (!card || !card->func)
return -EINVAL;
sdio_claim_host(card->func);
ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
btmrvl_sdio_get_rx_unit(card);
sdio_release_host(card->func);
return ret;
}
static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
{
int ret;
if (!card || !card->func)
return -EINVAL;
sdio_claim_host(card->func);
ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
sdio_release_host(card->func);
return ret;
}
static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
u8 *payload, u16 nb)
{
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret = 0;
int buf_block_len;
int blksz;
int i = 0;
u8 *buf = NULL;
void *tmpbuf = NULL;
int tmpbufsz;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
return -EINVAL;
}
buf = payload;
if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1)) {
tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN);
tmpbuf = kzalloc(tmpbufsz, GFP_KERNEL);
if (!tmpbuf)
return -ENOMEM;
buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
memcpy(buf, payload, nb);
}
blksz = SDIO_BLOCK_SIZE;
buf_block_len = DIV_ROUND_UP(nb, blksz);
sdio_claim_host(card->func);
do {
/* Transfer data to card */
ret = sdio_writesb(card->func, card->ioport, buf,
buf_block_len * blksz);
if (ret < 0) {
i++;
BT_ERR("i=%d writesb failed: %d", i, ret);
BT_ERR("hex: %*ph", nb, payload);
ret = -EIO;
if (i > MAX_WRITE_IOMEM_RETRY)
goto exit;
}
} while (ret);
priv->btmrvl_dev.tx_dnld_rdy = false;
exit:
sdio_release_host(card->func);
kfree(tmpbuf);
return ret;
}
static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
{
int ret;
u8 fws0;
int pollnum = MAX_POLL_TRIES;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
return -EINVAL;
}
if (!btmrvl_sdio_verify_fw_download(card, 1)) {
BT_DBG("Firmware already downloaded!");
return 0;
}
sdio_claim_host(card->func);
/* Check if other function driver is downloading the firmware */
fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret) {
BT_ERR("Failed to read FW downloading status!");
ret = -EIO;
goto done;
}
if (fws0) {
BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
/* Give other function more time to download the firmware */
pollnum *= 10;
} else {
if (card->helper) {
ret = btmrvl_sdio_download_helper(card);
if (ret) {
BT_ERR("Failed to download helper!");
ret = -EIO;
goto done;
}
}
if (btmrvl_sdio_download_fw_w_helper(card)) {
BT_ERR("Failed to download firmware!");
ret = -EIO;
goto done;
}
}
/*
* winner or not, with this test the FW synchronizes when the
* module can continue its initialization
*/
if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
BT_ERR("FW failed to be active in time!");
return -ETIMEDOUT;
}
sdio_release_host(card->func);
return 0;
done:
sdio_release_host(card->func);
return ret;
}
static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
{
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret = 0;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
return -EINVAL;
}
sdio_claim_host(card->func);
sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
sdio_release_host(card->func);
BT_DBG("wake up firmware");
return ret;
}
static void btmrvl_sdio_dump_regs(struct btmrvl_private *priv)
{
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret = 0;
unsigned int reg, reg_start, reg_end;
char buf[256], *ptr;
u8 loop, func, data;
int MAX_LOOP = 2;
btmrvl_sdio_wakeup_fw(priv);
sdio_claim_host(card->func);
for (loop = 0; loop < MAX_LOOP; loop++) {
memset(buf, 0, sizeof(buf));
ptr = buf;
if (loop == 0) {
/* Read the registers of SDIO function0 */
func = loop;
reg_start = 0;
reg_end = 9;
} else {
func = 2;
reg_start = 0;
reg_end = 0x09;
}
ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ",
func, reg_start, reg_end);
for (reg = reg_start; reg <= reg_end; reg++) {
if (func == 0)
data = sdio_f0_readb(card->func, reg, &ret);
else
data = sdio_readb(card->func, reg, &ret);
if (!ret) {
ptr += sprintf(ptr, "%02x ", data);
} else {
ptr += sprintf(ptr, "ERR");
break;
}
}
BT_INFO("%s", buf);
}
sdio_release_host(card->func);
}
/* This function read/write firmware */
static enum
rdwr_status btmrvl_sdio_rdwr_firmware(struct btmrvl_private *priv,
u8 doneflag)
{
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret, tries;
u8 ctrl_data = 0;
sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl,
&ret);
if (ret) {
BT_ERR("SDIO write err");
return RDWR_STATUS_FAILURE;
}
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl,
&ret);
if (ret) {
BT_ERR("SDIO read err");
return RDWR_STATUS_FAILURE;
}
if (ctrl_data == FW_DUMP_DONE)
break;
if (doneflag && ctrl_data == doneflag)
return RDWR_STATUS_DONE;
if (ctrl_data != FW_DUMP_HOST_READY) {
BT_INFO("The ctrl reg was changed, re-try again!");
sdio_writeb(card->func, FW_DUMP_HOST_READY,
card->reg->fw_dump_ctrl, &ret);
if (ret) {
BT_ERR("SDIO write err");
return RDWR_STATUS_FAILURE;
}
}
usleep_range(100, 200);
}
if (ctrl_data == FW_DUMP_HOST_READY) {
BT_ERR("Fail to pull ctrl_data");
return RDWR_STATUS_FAILURE;
}
return RDWR_STATUS_SUCCESS;
}
/* This function dump sdio register and memory data */
static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
{
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret = 0;
unsigned int reg, reg_start, reg_end;
enum rdwr_status stat;
u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr;
u8 dump_num = 0, idx, i, read_reg, doneflag = 0;
u32 memory_size, fw_dump_len = 0;
/* dump sdio register first */
btmrvl_sdio_dump_regs(priv);
if (!card->supports_fw_dump) {
BT_ERR("Firmware dump not supported for this card!");
return;
}
for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
if (entry->mem_ptr) {
vfree(entry->mem_ptr);
entry->mem_ptr = NULL;
}
entry->mem_size = 0;
}
btmrvl_sdio_wakeup_fw(priv);
sdio_claim_host(card->func);
BT_INFO("== btmrvl firmware dump start ==");
stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
if (stat == RDWR_STATUS_FAILURE)
goto done;
reg = card->reg->fw_dump_start;
/* Read the number of the memories which will dump */
dump_num = sdio_readb(card->func, reg, &ret);
if (ret) {
BT_ERR("SDIO read memory length err");
goto done;
}
/* Read the length of every memory which will dump */
for (idx = 0; idx < dump_num; idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
if (stat == RDWR_STATUS_FAILURE)
goto done;
memory_size = 0;
reg = card->reg->fw_dump_start;
for (i = 0; i < 4; i++) {
read_reg = sdio_readb(card->func, reg, &ret);
if (ret) {
BT_ERR("SDIO read err");
goto done;
}
memory_size |= (read_reg << i*8);
reg++;
}
if (memory_size == 0) {
BT_INFO("Firmware dump finished!");
sdio_writeb(card->func, FW_DUMP_READ_DONE,
card->reg->fw_dump_ctrl, &ret);
if (ret) {
BT_ERR("SDIO Write MEMDUMP_FINISH ERR");
goto done;
}
break;
}
BT_INFO("%s_SIZE=0x%x", entry->mem_name, memory_size);
entry->mem_ptr = vzalloc(memory_size + 1);
entry->mem_size = memory_size;
if (!entry->mem_ptr) {
BT_ERR("Vzalloc %s failed", entry->mem_name);
goto done;
}
fw_dump_len += (strlen("========Start dump ") +
strlen(entry->mem_name) +
strlen("========\n") +
(memory_size + 1) +
strlen("\n========End dump========\n"));
dbg_ptr = entry->mem_ptr;
end_ptr = dbg_ptr + memory_size;
doneflag = entry->done_flag;
BT_INFO("Start %s output, please wait...",
entry->mem_name);
do {
stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
if (stat == RDWR_STATUS_FAILURE)
goto done;
reg_start = card->reg->fw_dump_start;
reg_end = card->reg->fw_dump_end;
for (reg = reg_start; reg <= reg_end; reg++) {
*dbg_ptr = sdio_readb(card->func, reg, &ret);
if (ret) {
BT_ERR("SDIO read err");
goto done;
}
if (dbg_ptr < end_ptr)
dbg_ptr++;
else
BT_ERR("Allocated buffer not enough");
}
if (stat != RDWR_STATUS_DONE) {
continue;
} else {
BT_INFO("%s done: size=0x%tx",
entry->mem_name,
dbg_ptr - entry->mem_ptr);
break;
}
} while (1);
}
BT_INFO("== btmrvl firmware dump end ==");
done:
sdio_release_host(card->func);
if (fw_dump_len == 0)
return;
fw_dump_data = vzalloc(fw_dump_len+1);
if (!fw_dump_data) {
BT_ERR("Vzalloc fw_dump_data fail!");
return;
}
fw_dump_ptr = fw_dump_data;
/* Dump all the memory data into single file, a userspace script will
be used to split all the memory data to multiple files*/
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
for (idx = 0; idx < dump_num; idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
if (entry->mem_ptr) {
strcpy(fw_dump_ptr, "========Start dump ");
fw_dump_ptr += strlen("========Start dump ");
strcpy(fw_dump_ptr, entry->mem_name);
fw_dump_ptr += strlen(entry->mem_name);
strcpy(fw_dump_ptr, "========\n");
fw_dump_ptr += strlen("========\n");
memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size);
fw_dump_ptr += entry->mem_size;
strcpy(fw_dump_ptr, "\n========End dump========\n");
fw_dump_ptr += strlen("\n========End dump========\n");
vfree(mem_type_mapping_tbl[idx].mem_ptr);
mem_type_mapping_tbl[idx].mem_ptr = NULL;
}
}
/* fw_dump_data will be free in device coredump release function
after 5 min*/
dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
}
static int btmrvl_sdio_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
int ret = 0;
struct btmrvl_private *priv = NULL;
struct btmrvl_sdio_card *card = NULL;
BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
id->vendor, id->device, id->class, func->num);
card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL);
if (!card)
return -ENOMEM;
card->func = func;
if (id->driver_data) {
struct btmrvl_sdio_device *data = (void *) id->driver_data;
card->helper = data->helper;
card->firmware = data->firmware;
card->reg = data->reg;
card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
card->support_pscan_win_report = data->support_pscan_win_report;
card->supports_fw_dump = data->supports_fw_dump;
}
if (btmrvl_sdio_register_dev(card) < 0) {
BT_ERR("Failed to register BT device!");
return -ENODEV;
}
/* Disable the interrupts on the card */
btmrvl_sdio_disable_host_int(card);
if (btmrvl_sdio_download_fw(card)) {
BT_ERR("Downloading firmware failed!");
ret = -ENODEV;
goto unreg_dev;
}
btmrvl_sdio_enable_host_int(card);
priv = btmrvl_add_card(card);
if (!priv) {
BT_ERR("Initializing card failed!");
ret = -ENODEV;
goto disable_host_int;
}
card->priv = priv;
/* Initialize the interface specific function pointers */
priv->hw_host_to_card = btmrvl_sdio_host_to_card;
priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
priv->hw_process_int_status = btmrvl_sdio_process_int_status;
priv->firmware_dump = btmrvl_sdio_dump_firmware;
if (btmrvl_register_hdev(priv)) {
BT_ERR("Register hdev failed!");
ret = -ENODEV;
goto disable_host_int;
}
return 0;
disable_host_int:
btmrvl_sdio_disable_host_int(card);
unreg_dev:
btmrvl_sdio_unregister_dev(card);
return ret;
}
static void btmrvl_sdio_remove(struct sdio_func *func)
{
struct btmrvl_sdio_card *card;
if (func) {
card = sdio_get_drvdata(func);
if (card) {
/* Send SHUTDOWN command & disable interrupt
* if user removes the module.
*/
if (user_rmmod) {
btmrvl_send_module_cfg_cmd(card->priv,
MODULE_SHUTDOWN_REQ);
btmrvl_sdio_disable_host_int(card);
}
BT_DBG("unregester dev");
card->priv->surprise_removed = true;
btmrvl_sdio_unregister_dev(card);
btmrvl_remove_card(card->priv);
}
}
}
static int btmrvl_sdio_suspend(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
struct btmrvl_sdio_card *card;
struct btmrvl_private *priv;
mmc_pm_flag_t pm_flags;
struct hci_dev *hcidev;
if (func) {
pm_flags = sdio_get_host_pm_caps(func);
BT_DBG("%s: suspend: PM flags = 0x%x", sdio_func_id(func),
pm_flags);
if (!(pm_flags & MMC_PM_KEEP_POWER)) {
BT_ERR("%s: cannot remain alive while suspended",
sdio_func_id(func));
return -ENOSYS;
}
card = sdio_get_drvdata(func);
if (!card || !card->priv) {
BT_ERR("card or priv structure is not valid");
return 0;
}
} else {
BT_ERR("sdio_func is not specified");
return 0;
}
priv = card->priv;
hcidev = priv->btmrvl_dev.hcidev;
BT_DBG("%s: SDIO suspend", hcidev->name);
hci_suspend_dev(hcidev);
skb_queue_purge(&priv->adapter->tx_queue);
if (priv->adapter->hs_state != HS_ACTIVATED) {
if (btmrvl_enable_hs(priv)) {
BT_ERR("HS not actived, suspend failed!");
return -EBUSY;
}
}
priv->adapter->is_suspended = true;
/* We will keep the power when hs enabled successfully */
if (priv->adapter->hs_state == HS_ACTIVATED) {
BT_DBG("suspend with MMC_PM_KEEP_POWER");
return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
} else {
BT_DBG("suspend without MMC_PM_KEEP_POWER");
return 0;
}
}
static int btmrvl_sdio_resume(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
struct btmrvl_sdio_card *card;
struct btmrvl_private *priv;
mmc_pm_flag_t pm_flags;
struct hci_dev *hcidev;
if (func) {
pm_flags = sdio_get_host_pm_caps(func);
BT_DBG("%s: resume: PM flags = 0x%x", sdio_func_id(func),
pm_flags);
card = sdio_get_drvdata(func);
if (!card || !card->priv) {
BT_ERR("card or priv structure is not valid");
return 0;
}
} else {
BT_ERR("sdio_func is not specified");
return 0;
}
priv = card->priv;
if (!priv->adapter->is_suspended) {
BT_DBG("device already resumed");
return 0;
}
priv->hw_wakeup_firmware(priv);
priv->adapter->hs_state = HS_DEACTIVATED;
hcidev = priv->btmrvl_dev.hcidev;
BT_DBG("%s: HS DEACTIVATED in resume!", hcidev->name);
priv->adapter->is_suspended = false;
BT_DBG("%s: SDIO resume", hcidev->name);
hci_resume_dev(hcidev);
return 0;
}
static const struct dev_pm_ops btmrvl_sdio_pm_ops = {
.suspend = btmrvl_sdio_suspend,
.resume = btmrvl_sdio_resume,
};
static struct sdio_driver bt_mrvl_sdio = {
.name = "btmrvl_sdio",
.id_table = btmrvl_sdio_ids,
.probe = btmrvl_sdio_probe,
.remove = btmrvl_sdio_remove,
.drv = {
.owner = THIS_MODULE,
.pm = &btmrvl_sdio_pm_ops,
}
};
static int __init btmrvl_sdio_init_module(void)
{
if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
BT_ERR("SDIO Driver Registration Failed");
return -ENODEV;
}
/* Clear the flag in case user removes the card. */
user_rmmod = 0;
return 0;
}
static void __exit btmrvl_sdio_exit_module(void)
{
/* Set the flag as user is removing this module. */
user_rmmod = 1;
sdio_unregister_driver(&bt_mrvl_sdio);
}
module_init(btmrvl_sdio_init_module);
module_exit(btmrvl_sdio_exit_module);
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");