[SCSI] ips: remove kernel 2.4 code
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index b726dcc..24123d5 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -58,10 +58,6 @@
/*
* Some handy macros
*/
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) || defined CONFIG_HIGHIO
- #define IPS_HIGHIO
- #endif
-
#define IPS_HA(x) ((ips_ha_t *) x->hostdata)
#define IPS_COMMAND_ID(ha, scb) (int) (scb - ha->scbs)
#define IPS_IS_TROMBONE(ha) (((ha->device_id == IPS_DEVICEID_COPPERHEAD) && \
@@ -84,38 +80,8 @@
#define IPS_SGLIST_SIZE(ha) (IPS_USE_ENH_SGLIST(ha) ? \
sizeof(IPS_ENH_SG_LIST) : sizeof(IPS_STD_SG_LIST))
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4)
- #define pci_set_dma_mask(dev,mask) ( mask > 0xffffffff ? 1:0 )
- #define scsi_set_pci_device(sh,dev) (0)
- #endif
-
- #ifndef IRQ_NONE
- typedef void irqreturn_t;
- #define IRQ_NONE
- #define IRQ_HANDLED
- #define IRQ_RETVAL(x)
- #endif
-
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- #define IPS_REGISTER_HOSTS(SHT) scsi_register_module(MODULE_SCSI_HA,SHT)
- #define IPS_UNREGISTER_HOSTS(SHT) scsi_unregister_module(MODULE_SCSI_HA,SHT)
- #define IPS_ADD_HOST(shost,device)
- #define IPS_REMOVE_HOST(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) scsi_set_pci_device(sh, (ha)->pcidev)
- #define IPS_PRINTK(level, pcidev, format, arg...) \
- printk(level "%s %s:" format , "ips" , \
- (pcidev)->slot_name , ## arg)
- #define scsi_host_alloc(sh,size) scsi_register(sh,size)
- #define scsi_host_put(sh) scsi_unregister(sh)
- #else
- #define IPS_REGISTER_HOSTS(SHT) (!ips_detect(SHT))
- #define IPS_UNREGISTER_HOSTS(SHT)
- #define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
- #define IPS_REMOVE_HOST(shost) scsi_remove_host(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
- #define IPS_PRINTK(level, pcidev, format, arg...) \
+ #define IPS_PRINTK(level, pcidev, format, arg...) \
dev_printk(level , &((pcidev)->dev) , format , ## arg)
- #endif
#define MDELAY(n) \
do { \
@@ -134,7 +100,7 @@
#define pci_dma_hi32(a) ((a >> 16) >> 16)
#define pci_dma_lo32(a) (a & 0xffffffff)
- #if (BITS_PER_LONG > 32) || (defined CONFIG_HIGHMEM64G && defined IPS_HIGHIO)
+ #if (BITS_PER_LONG > 32) || defined(CONFIG_HIGHMEM64G)
#define IPS_ENABLE_DMA64 (1)
#else
#define IPS_ENABLE_DMA64 (0)
@@ -451,16 +417,10 @@
/*
* Scsi_Host Template
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- static int ips_proc24_info(char *, char **, off_t, int, int, int);
- static void ips_select_queue_depth(struct Scsi_Host *, struct scsi_device *);
- static int ips_biosparam(Disk *disk, kdev_t dev, int geom[]);
-#else
static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[]);
static int ips_slave_configure(struct scsi_device *SDptr);
-#endif
/*
* Raid Command Formats