crypto: poly1305 - Add a SSE2 SIMD variant for x86_64
Implements an x86_64 assembler driver for the Poly1305 authenticator. This
single block variant holds the 130-bit integer in 5 32-bit words, but uses
SSE to do two multiplications/additions in parallel.
When calling updates with small blocks, the overhead for kernel_fpu_begin/
kernel_fpu_end() negates the perfmance gain. We therefore use the
poly1305-generic fallback for small updates.
For large messages, throughput increases by ~5-10% compared to
poly1305-generic:
testing speed of poly1305 (poly1305-generic)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec
testing speed of poly1305 (poly1305-simd)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec
Benchmark results from a Core i5-4670T.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index ce39b3c..5cf405c 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
+obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
# These modules require assembler to support AVX.
ifeq ($(avx_supported),yes)
@@ -85,6 +86,7 @@
aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o aes_ctrby8_avx-x86_64.o
ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o
+poly1305-x86_64-y := poly1305-sse2-x86_64.o poly1305_glue.o
ifeq ($(avx2_supported),yes)
sha1-ssse3-y += sha1_avx2_x86_64_asm.o
endif
diff --git a/arch/x86/crypto/poly1305-sse2-x86_64.S b/arch/x86/crypto/poly1305-sse2-x86_64.S
new file mode 100644
index 0000000..a3d2b5e
--- /dev/null
+++ b/arch/x86/crypto/poly1305-sse2-x86_64.S
@@ -0,0 +1,276 @@
+/*
+ * Poly1305 authenticator algorithm, RFC7539, x64 SSE2 functions
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+
+.data
+.align 16
+
+ANMASK: .octa 0x0000000003ffffff0000000003ffffff
+
+.text
+
+#define h0 0x00(%rdi)
+#define h1 0x04(%rdi)
+#define h2 0x08(%rdi)
+#define h3 0x0c(%rdi)
+#define h4 0x10(%rdi)
+#define r0 0x00(%rdx)
+#define r1 0x04(%rdx)
+#define r2 0x08(%rdx)
+#define r3 0x0c(%rdx)
+#define r4 0x10(%rdx)
+#define s1 0x00(%rsp)
+#define s2 0x04(%rsp)
+#define s3 0x08(%rsp)
+#define s4 0x0c(%rsp)
+#define m %rsi
+#define h01 %xmm0
+#define h23 %xmm1
+#define h44 %xmm2
+#define t1 %xmm3
+#define t2 %xmm4
+#define t3 %xmm5
+#define t4 %xmm6
+#define mask %xmm7
+#define d0 %r8
+#define d1 %r9
+#define d2 %r10
+#define d3 %r11
+#define d4 %r12
+
+ENTRY(poly1305_block_sse2)
+ # %rdi: Accumulator h[5]
+ # %rsi: 16 byte input block m
+ # %rdx: Poly1305 key r[5]
+ # %rcx: Block count
+
+ # This single block variant tries to improve performance by doing two
+ # multiplications in parallel using SSE instructions. There is quite
+ # some quardword packing involved, hence the speedup is marginal.
+
+ push %rbx
+ push %r12
+ sub $0x10,%rsp
+
+ # s1..s4 = r1..r4 * 5
+ mov r1,%eax
+ lea (%eax,%eax,4),%eax
+ mov %eax,s1
+ mov r2,%eax
+ lea (%eax,%eax,4),%eax
+ mov %eax,s2
+ mov r3,%eax
+ lea (%eax,%eax,4),%eax
+ mov %eax,s3
+ mov r4,%eax
+ lea (%eax,%eax,4),%eax
+ mov %eax,s4
+
+ movdqa ANMASK(%rip),mask
+
+.Ldoblock:
+ # h01 = [0, h1, 0, h0]
+ # h23 = [0, h3, 0, h2]
+ # h44 = [0, h4, 0, h4]
+ movd h0,h01
+ movd h1,t1
+ movd h2,h23
+ movd h3,t2
+ movd h4,h44
+ punpcklqdq t1,h01
+ punpcklqdq t2,h23
+ punpcklqdq h44,h44
+
+ # h01 += [ (m[3-6] >> 2) & 0x3ffffff, m[0-3] & 0x3ffffff ]
+ movd 0x00(m),t1
+ movd 0x03(m),t2
+ psrld $2,t2
+ punpcklqdq t2,t1
+ pand mask,t1
+ paddd t1,h01
+ # h23 += [ (m[9-12] >> 6) & 0x3ffffff, (m[6-9] >> 4) & 0x3ffffff ]
+ movd 0x06(m),t1
+ movd 0x09(m),t2
+ psrld $4,t1
+ psrld $6,t2
+ punpcklqdq t2,t1
+ pand mask,t1
+ paddd t1,h23
+ # h44 += [ (m[12-15] >> 8) | (1 << 24), (m[12-15] >> 8) | (1 << 24) ]
+ mov 0x0c(m),%eax
+ shr $8,%eax
+ or $0x01000000,%eax
+ movd %eax,t1
+ pshufd $0xc4,t1,t1
+ paddd t1,h44
+
+ # t1[0] = h0 * r0 + h2 * s3
+ # t1[1] = h1 * s4 + h3 * s2
+ movd r0,t1
+ movd s4,t2
+ punpcklqdq t2,t1
+ pmuludq h01,t1
+ movd s3,t2
+ movd s2,t3
+ punpcklqdq t3,t2
+ pmuludq h23,t2
+ paddq t2,t1
+ # t2[0] = h0 * r1 + h2 * s4
+ # t2[1] = h1 * r0 + h3 * s3
+ movd r1,t2
+ movd r0,t3
+ punpcklqdq t3,t2
+ pmuludq h01,t2
+ movd s4,t3
+ movd s3,t4
+ punpcklqdq t4,t3
+ pmuludq h23,t3
+ paddq t3,t2
+ # t3[0] = h4 * s1
+ # t3[1] = h4 * s2
+ movd s1,t3
+ movd s2,t4
+ punpcklqdq t4,t3
+ pmuludq h44,t3
+ # d0 = t1[0] + t1[1] + t3[0]
+ # d1 = t2[0] + t2[1] + t3[1]
+ movdqa t1,t4
+ punpcklqdq t2,t4
+ punpckhqdq t2,t1
+ paddq t4,t1
+ paddq t3,t1
+ movq t1,d0
+ psrldq $8,t1
+ movq t1,d1
+
+ # t1[0] = h0 * r2 + h2 * r0
+ # t1[1] = h1 * r1 + h3 * s4
+ movd r2,t1
+ movd r1,t2
+ punpcklqdq t2,t1
+ pmuludq h01,t1
+ movd r0,t2
+ movd s4,t3
+ punpcklqdq t3,t2
+ pmuludq h23,t2
+ paddq t2,t1
+ # t2[0] = h0 * r3 + h2 * r1
+ # t2[1] = h1 * r2 + h3 * r0
+ movd r3,t2
+ movd r2,t3
+ punpcklqdq t3,t2
+ pmuludq h01,t2
+ movd r1,t3
+ movd r0,t4
+ punpcklqdq t4,t3
+ pmuludq h23,t3
+ paddq t3,t2
+ # t3[0] = h4 * s3
+ # t3[1] = h4 * s4
+ movd s3,t3
+ movd s4,t4
+ punpcklqdq t4,t3
+ pmuludq h44,t3
+ # d2 = t1[0] + t1[1] + t3[0]
+ # d3 = t2[0] + t2[1] + t3[1]
+ movdqa t1,t4
+ punpcklqdq t2,t4
+ punpckhqdq t2,t1
+ paddq t4,t1
+ paddq t3,t1
+ movq t1,d2
+ psrldq $8,t1
+ movq t1,d3
+
+ # t1[0] = h0 * r4 + h2 * r2
+ # t1[1] = h1 * r3 + h3 * r1
+ movd r4,t1
+ movd r3,t2
+ punpcklqdq t2,t1
+ pmuludq h01,t1
+ movd r2,t2
+ movd r1,t3
+ punpcklqdq t3,t2
+ pmuludq h23,t2
+ paddq t2,t1
+ # t3[0] = h4 * r0
+ movd r0,t3
+ pmuludq h44,t3
+ # d4 = t1[0] + t1[1] + t3[0]
+ movdqa t1,t4
+ psrldq $8,t4
+ paddq t4,t1
+ paddq t3,t1
+ movq t1,d4
+
+ # d1 += d0 >> 26
+ mov d0,%rax
+ shr $26,%rax
+ add %rax,d1
+ # h0 = d0 & 0x3ffffff
+ mov d0,%rbx
+ and $0x3ffffff,%ebx
+
+ # d2 += d1 >> 26
+ mov d1,%rax
+ shr $26,%rax
+ add %rax,d2
+ # h1 = d1 & 0x3ffffff
+ mov d1,%rax
+ and $0x3ffffff,%eax
+ mov %eax,h1
+
+ # d3 += d2 >> 26
+ mov d2,%rax
+ shr $26,%rax
+ add %rax,d3
+ # h2 = d2 & 0x3ffffff
+ mov d2,%rax
+ and $0x3ffffff,%eax
+ mov %eax,h2
+
+ # d4 += d3 >> 26
+ mov d3,%rax
+ shr $26,%rax
+ add %rax,d4
+ # h3 = d3 & 0x3ffffff
+ mov d3,%rax
+ and $0x3ffffff,%eax
+ mov %eax,h3
+
+ # h0 += (d4 >> 26) * 5
+ mov d4,%rax
+ shr $26,%rax
+ lea (%eax,%eax,4),%eax
+ add %eax,%ebx
+ # h4 = d4 & 0x3ffffff
+ mov d4,%rax
+ and $0x3ffffff,%eax
+ mov %eax,h4
+
+ # h1 += h0 >> 26
+ mov %ebx,%eax
+ shr $26,%eax
+ add %eax,h1
+ # h0 = h0 & 0x3ffffff
+ andl $0x3ffffff,%ebx
+ mov %ebx,h0
+
+ add $0x10,m
+ dec %rcx
+ jnz .Ldoblock
+
+ add $0x10,%rsp
+ pop %r12
+ pop %rbx
+ ret
+ENDPROC(poly1305_block_sse2)
diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c
new file mode 100644
index 0000000..1e59274
--- /dev/null
+++ b/arch/x86/crypto/poly1305_glue.c
@@ -0,0 +1,123 @@
+/*
+ * Poly1305 authenticator algorithm, RFC7539, SIMD glue code
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/internal/hash.h>
+#include <crypto/poly1305.h>
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/fpu/api.h>
+#include <asm/simd.h>
+
+asmlinkage void poly1305_block_sse2(u32 *h, const u8 *src,
+ const u32 *r, unsigned int blocks);
+
+static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx,
+ const u8 *src, unsigned int srclen)
+{
+ unsigned int blocks, datalen;
+
+ if (unlikely(!dctx->sset)) {
+ datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
+ src += srclen - datalen;
+ srclen = datalen;
+ }
+
+ if (srclen >= POLY1305_BLOCK_SIZE) {
+ blocks = srclen / POLY1305_BLOCK_SIZE;
+ poly1305_block_sse2(dctx->h, src, dctx->r, blocks);
+ srclen -= POLY1305_BLOCK_SIZE * blocks;
+ }
+ return srclen;
+}
+
+static int poly1305_simd_update(struct shash_desc *desc,
+ const u8 *src, unsigned int srclen)
+{
+ struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
+ unsigned int bytes;
+
+ /* kernel_fpu_begin/end is costly, use fallback for small updates */
+ if (srclen <= 288 || !may_use_simd())
+ return crypto_poly1305_update(desc, src, srclen);
+
+ kernel_fpu_begin();
+
+ if (unlikely(dctx->buflen)) {
+ bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen);
+ memcpy(dctx->buf + dctx->buflen, src, bytes);
+ src += bytes;
+ srclen -= bytes;
+ dctx->buflen += bytes;
+
+ if (dctx->buflen == POLY1305_BLOCK_SIZE) {
+ poly1305_simd_blocks(dctx, dctx->buf,
+ POLY1305_BLOCK_SIZE);
+ dctx->buflen = 0;
+ }
+ }
+
+ if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
+ bytes = poly1305_simd_blocks(dctx, src, srclen);
+ src += srclen - bytes;
+ srclen = bytes;
+ }
+
+ kernel_fpu_end();
+
+ if (unlikely(srclen)) {
+ dctx->buflen = srclen;
+ memcpy(dctx->buf, src, srclen);
+ }
+
+ return 0;
+}
+
+static struct shash_alg alg = {
+ .digestsize = POLY1305_DIGEST_SIZE,
+ .init = crypto_poly1305_init,
+ .update = poly1305_simd_update,
+ .final = crypto_poly1305_final,
+ .setkey = crypto_poly1305_setkey,
+ .descsize = sizeof(struct poly1305_desc_ctx),
+ .base = {
+ .cra_name = "poly1305",
+ .cra_driver_name = "poly1305-simd",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_alignmask = sizeof(u32) - 1,
+ .cra_blocksize = POLY1305_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ },
+};
+
+static int __init poly1305_simd_mod_init(void)
+{
+ if (!cpu_has_xmm2)
+ return -ENODEV;
+
+ return crypto_register_shash(&alg);
+}
+
+static void __exit poly1305_simd_mod_exit(void)
+{
+ crypto_unregister_shash(&alg);
+}
+
+module_init(poly1305_simd_mod_init);
+module_exit(poly1305_simd_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
+MODULE_DESCRIPTION("Poly1305 authenticator");
+MODULE_ALIAS_CRYPTO("poly1305");
+MODULE_ALIAS_CRYPTO("poly1305-simd");
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 82caab0..c57478c 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -470,6 +470,18 @@
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
+config CRYPTO_POLY1305_X86_64
+ tristate "Poly1305 authenticator algorithm (x86_64/SSE2)"
+ depends on X86 && 64BIT
+ select CRYPTO_POLY1305
+ help
+ Poly1305 authenticator algorithm, RFC7539.
+
+ Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
+ It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
+ in IETF protocols. This is the x86_64 assembler implementation using SIMD
+ instructions.
+
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH