[SCSI] lpfc 8.3.36: Fixed boot from san failure
Fixed boot from san failure when SLI4 FC device presented on the same PCI bus
The request_firmware interface can induce delays while looking
for firmware files, even if no fw file is present. In some situations
the delays exceeded scan_wait timeouts, resulting in situations in which
the boot device had not been discovered in time. Boot Device does not
need to be on a lpfc device.
Change request_firmware use to be module paramater driven. Default is to
not attempt firmware download on boot. Add sysfs parameter to invoke
firmware update.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 69b5993..d0ed6c1 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -714,6 +714,7 @@
uint32_t cfg_log_verbose;
uint32_t cfg_aer_support;
uint32_t cfg_sriov_nr_virtfn;
+ uint32_t cfg_request_firmware_upgrade;
uint32_t cfg_iocb_cnt;
uint32_t cfg_suppress_link_up;
#define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ad16e54..a71c7eb 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3618,6 +3618,77 @@
lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store);
/**
+ * lpfc_request_firmware_store - Request for Linux generic firmware upgrade
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string the number of vfs to be enabled.
+ * @count: unused variable.
+ *
+ * Description:
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_request_firmware_upgrade_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0, rc = -EINVAL;
+
+ /* Sanity check on user data */
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+ if (val != 1)
+ return -EINVAL;
+
+ rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE);
+ if (rc)
+ rc = -EPERM;
+ else
+ rc = strlen(buf);
+ return rc;
+}
+
+static int lpfc_req_fw_upgrade;
+module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade");
+lpfc_param_show(request_firmware_upgrade)
+
+/**
+ * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade
+ * @phba: lpfc_hba pointer.
+ * @val: 0 or 1.
+ *
+ * Description:
+ * Set the initial Linux generic firmware upgrade enable or disable flag.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val)
+{
+ if (val >= 0 && val <= 1) {
+ phba->cfg_request_firmware_upgrade = val;
+ return 0;
+ }
+ return -EINVAL;
+}
+static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR,
+ lpfc_request_firmware_upgrade_show,
+ lpfc_request_firmware_upgrade_store);
+
+/**
* lpfc_fcp_imax_store
*
* @dev: class device that is converted into a Scsi_host.
@@ -4069,6 +4140,7 @@
&dev_attr_lpfc_aer_support,
&dev_attr_lpfc_aer_state_cleanup,
&dev_attr_lpfc_sriov_nr_virtfn,
+ &dev_attr_lpfc_req_fw_upgrade,
&dev_attr_lpfc_suppress_link_up,
&dev_attr_lpfc_iocb_cnt,
&dev_attr_iocb_hw,
@@ -5051,6 +5123,7 @@
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
lpfc_aer_support_init(phba, lpfc_aer_support);
lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
+ lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
phba->cfg_enable_dss = 1;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 4380a44..69d66e3 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -468,3 +468,4 @@
int lpfc_sli4_xri_sgl_update(struct lpfc_hba *);
void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
uint32_t lpfc_sli_port_speed_get(struct lpfc_hba *);
+int lpfc_sli4_request_firmware_update(struct lpfc_hba *, uint8_t);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 7dc4218..d895693 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9450,7 +9450,7 @@
struct lpfc_dmabuf *dmabuf, *next;
uint32_t offset = 0, temp_offset = 0;
- /* It can be null, sanity check */
+ /* It can be null in no-wait mode, sanity check */
if (!fw) {
rc = -ENXIO;
goto out;
@@ -9528,11 +9528,48 @@
release_firmware(fw);
out:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3024 Firmware update done: %d.", rc);
+ "3024 Firmware update done: %d.\n", rc);
return;
}
/**
+ * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to perform Linux generic firmware upgrade on device
+ * that supports such feature.
+ **/
+int
+lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
+{
+ uint8_t file_name[ELX_MODEL_NAME_SIZE];
+ int ret;
+ const struct firmware *fw;
+
+ /* Only supported on SLI4 interface type 2 for now */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2)
+ return -EPERM;
+
+ snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp", phba->ModelName);
+
+ if (fw_upgrade == INT_FW_UPGRADE) {
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+ file_name, &phba->pcidev->dev,
+ GFP_KERNEL, (void *)phba,
+ lpfc_write_firmware);
+ } else if (fw_upgrade == RUN_FW_UPGRADE) {
+ ret = request_firmware(&fw, file_name, &phba->pcidev->dev);
+ if (!ret)
+ lpfc_write_firmware(fw, (void *)phba);
+ } else {
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
* lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
@@ -9560,7 +9597,6 @@
uint32_t cfg_mode, intr_mode;
int mcnt;
int adjusted_fcp_io_channel;
- uint8_t file_name[ELX_MODEL_NAME_SIZE];
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
@@ -9703,16 +9739,9 @@
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
- /* check for firmware upgrade or downgrade (if_type 2 only) */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
- LPFC_SLI_INTF_IF_TYPE_2) {
- snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp",
- phba->ModelName);
- ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
- file_name, &phba->pcidev->dev,
- GFP_KERNEL, (void *)phba,
- lpfc_write_firmware);
- }
+ /* check for firmware upgrade or downgrade */
+ if (phba->cfg_request_firmware_upgrade)
+ ret = lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);
/* Check if there are static vports to be created. */
lpfc_create_static_vport(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index f44a06a..44c427a 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -82,6 +82,9 @@
#define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
+#define INT_FW_UPGRADE 0
+#define RUN_FW_UPGRADE 1
+
enum lpfc_sli4_queue_type {
LPFC_EQ,
LPFC_GCQ,