[media] em28xx: Prepare to support 2 different I2C buses
Newer em28xx devices have 2 buses. Change the logic to allow
using both buses.
This patch was generated by this small script:
for i in drivers/media/usb/em28xx/*.c; do
sed 's,->i2c_adap,->i2c_adap[dev->def_i2c_bus],g;s,->i2c_client,->i2c_client[dev->def_i2c_bus],'
done
Of course, em28xx.h needed manual edit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 4dcef9d..d81f7ee 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2249,7 +2249,7 @@
};
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], ®s[i][0], 3);
return 0;
}
@@ -2276,7 +2276,7 @@
};
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], ®s[i][0], 3);
return 0;
}
@@ -2294,10 +2294,10 @@
u16 version;
/* Micron sensor detection */
- dev->i2c_client.addr = 0xba >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xba >> 1;
cmd = 0;
- i2c_master_send(&dev->i2c_client, &cmd, 1);
- rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], &cmd, 1);
+ rc = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus], (char *)&version_be, 2);
if (rc != 2)
return -EINVAL;
@@ -2748,8 +2748,8 @@
#endif
/* Call first TVeeprom */
- dev->i2c_client.addr = 0xa0 >> 1;
- tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
+ tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
dev->tuner_type = tv.tuner_type;
@@ -2841,15 +2841,15 @@
/* request some modules */
if (dev->board.has_msp34xx)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
@@ -2861,25 +2861,25 @@
};
pdata.xtal = dev->sensor_xtal;
- v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
&mt9v011_info, NULL);
}
if (dev->board.adecoder == EM28XX_TVAUDIO)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
@@ -2887,13 +2887,13 @@
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->tuner_addr, NULL);
}
}
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 7200dfe..98b95be 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -463,10 +463,10 @@
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, hauppauge_hvr930c_end);
msleep(100);
@@ -520,10 +520,10 @@
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_h5_end);
};
@@ -573,10 +573,10 @@
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_stick_end);
};
@@ -631,10 +631,10 @@
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_usb_xs_end);
};
@@ -660,10 +660,10 @@
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
};
- dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; /* 0x41 */
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
};
static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe)
@@ -777,7 +777,7 @@
struct xc2028_config cfg;
memset(&cfg, 0, sizeof(cfg));
- cfg.i2c_adap = &dev->i2c_adap;
+ cfg.i2c_adap = &dev->i2c_adap[dev->def_i2c_bus];
cfg.i2c_addr = addr;
if (!dev->dvb->fe[0]) {
@@ -960,7 +960,7 @@
switch (dev->model) {
case EM2874_BOARD_LEADERSHIP_ISDBT:
dvb->fe[0] = dvb_attach(s921_attach,
- &sharp_isdbt, &dev->i2c_adap);
+ &sharp_isdbt, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
@@ -974,7 +974,7 @@
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -983,7 +983,7 @@
case EM2880_BOARD_KWORLD_DVB_310U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -994,7 +994,7 @@
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1007,13 +1007,13 @@
case EM2882_BOARD_KWORLD_VS_DVBT:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] == NULL) {
/* This board could have either a zl10353 or a mt352.
If the chip id isn't for zl10353, try mt352 */
dvb->fe[0] = dvb_attach(mt352_attach,
&terratec_xs_mt352_cfg,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
}
if (em28xx_attach_xc3028(0x61, dev) < 0) {
@@ -1024,16 +1024,16 @@
case EM2870_BOARD_KWORLD_355U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_no_i2c_gate_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL)
dvb_attach(qt1010_attach, dvb->fe[0],
- &dev->i2c_adap, &em28xx_qt1010_config);
+ &dev->i2c_adap[dev->def_i2c_bus], &em28xx_qt1010_config);
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_EVGA_INDTUBE:
dvb->fe[0] = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1042,10 +1042,10 @@
case EM2882_BOARD_KWORLD_ATSC_315U:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x61, TUNER_THOMSON_DTT761X)) {
result = -EINVAL;
goto out_free;
}
@@ -1054,7 +1054,7 @@
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
- &dev->i2c_adap, &dev->udev->dev);
+ &dev->i2c_adap[dev->def_i2c_bus], &dev->udev->dev);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1064,10 +1064,10 @@
/* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
dvb->fe[0] = dvb_attach(tda10023_attach,
&em28xx_tda10023_config,
- &dev->i2c_adap, 0x48);
+ &dev->i2c_adap[dev->def_i2c_bus], 0x48);
if (dvb->fe[0]) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x60, TUNER_PHILIPS_CU1216L)) {
result = -EINVAL;
goto out_free;
}
@@ -1076,10 +1076,10 @@
case EM2870_BOARD_KWORLD_A340:
dvb->fe[0] = dvb_attach(lgdt3305_attach,
&em2870_lgdt3304_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL)
dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap, &kworld_a340_config);
+ &dev->i2c_adap[dev->def_i2c_bus], &kworld_a340_config);
break;
case EM28174_BOARD_PCTV_290E:
/* set default GPIO0 for LNA, used if GPIOLIB is undefined */
@@ -1087,14 +1087,14 @@
CXD2820R_GPIO_L;
dvb->fe[0] = dvb_attach(cxd2820r_attach,
&em28xx_cxd2820r_config,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&dvb->lna_gpio);
if (dvb->fe[0]) {
/* FE 0 attach tuner */
if (!dvb_attach(tda18271_attach,
dvb->fe[0],
0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
@@ -1124,7 +1124,7 @@
hauppauge_hvr930c_init(dev);
dvb->fe[0] = dvb_attach(drxk_attach,
- &hauppauge_930c_drxk, &dev->i2c_adap);
+ &hauppauge_930c_drxk, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1142,7 +1142,7 @@
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
- if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap,
+ if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
&cfg)) {
result = -EINVAL;
goto out_free;
@@ -1155,7 +1155,7 @@
case EM2884_BOARD_TERRATEC_H5:
terratec_h5_init(dev);
- dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap);
+ dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1169,7 +1169,7 @@
/* Attach tda18271 to DVB-C frontend */
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
- if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
+ if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus], 0x60)) {
result = -EINVAL;
goto out_free;
}
@@ -1180,17 +1180,17 @@
case EM28174_BOARD_PCTV_460E:
/* attach demod */
dvb->fe[0] = dvb_attach(tda10071_attach,
- &em28xx_tda10071_config, &dev->i2c_adap);
+ &em28xx_tda10071_config, &dev->i2c_adap[dev->def_i2c_bus]);
/* attach SEC */
if (dvb->fe[0])
- dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
+ dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_a8293_config);
break;
case EM2874_BOARD_MAXMEDIA_UB425_TC:
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0]) {
/* disable I2C-gate */
@@ -1198,7 +1198,7 @@
/* attach tuner */
if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0],
- &dev->i2c_adap, 0x60)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x60)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
@@ -1216,12 +1216,12 @@
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0]) {
/* attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
@@ -1234,7 +1234,7 @@
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1242,7 +1242,7 @@
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
@@ -1253,7 +1253,7 @@
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1261,7 +1261,7 @@
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 6152423..9086e57 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -384,7 +384,7 @@
/* Select address */
buf[0] = addr >> 8;
buf[1] = addr & 0xff;
- ret = i2c_master_send(&dev->i2c_client, buf + !addr_w16, 1 + addr_w16);
+ ret = i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], buf + !addr_w16, 1 + addr_w16);
if (ret < 0)
return ret;
/* Read data */
@@ -398,7 +398,7 @@
else
rsize = remain;
- ret = i2c_master_recv(&dev->i2c_client, data, rsize);
+ ret = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus], data, rsize);
if (ret < 0)
return ret;
@@ -422,10 +422,10 @@
*eedata = NULL;
*eedata_len = 0;
- dev->i2c_client.addr = 0xa0 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
/* Check if board has eeprom */
- err = i2c_master_recv(&dev->i2c_client, &buf, 0);
+ err = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus], &buf, 0);
if (err < 0) {
em28xx_info("board has no eeprom\n");
return -ENODEV;
@@ -652,8 +652,8 @@
memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist));
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
- dev->i2c_client.addr = i;
- rc = i2c_master_recv(&dev->i2c_client, &buf, 0);
+ dev->i2c_client[dev->def_i2c_bus].addr = i;
+ rc = i2c_master_recv(&dev->i2c_client[dev->def_i2c_bus], &buf, 0);
if (rc < 0)
continue;
i2c_devicelist[i] = i;
@@ -675,21 +675,21 @@
BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
- dev->i2c_adap = em28xx_adap_template;
- dev->i2c_adap.dev.parent = &dev->udev->dev;
- strcpy(dev->i2c_adap.name, dev->name);
- dev->i2c_adap.algo_data = dev;
- i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+ dev->i2c_adap[dev->def_i2c_bus] = em28xx_adap_template;
+ dev->i2c_adap[dev->def_i2c_bus].dev.parent = &dev->udev->dev;
+ strcpy(dev->i2c_adap[dev->def_i2c_bus].name, dev->name);
+ dev->i2c_adap[dev->def_i2c_bus].algo_data = dev;
+ i2c_set_adapdata(&dev->i2c_adap[dev->def_i2c_bus], &dev->v4l2_dev);
- retval = i2c_add_adapter(&dev->i2c_adap);
+ retval = i2c_add_adapter(&dev->i2c_adap[dev->def_i2c_bus]);
if (retval < 0) {
em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n",
__func__, retval);
return retval;
}
- dev->i2c_client = em28xx_client_template;
- dev->i2c_client.adapter = &dev->i2c_adap;
+ dev->i2c_client[dev->def_i2c_bus] = em28xx_client_template;
+ dev->i2c_client[dev->def_i2c_bus].adapter = &dev->i2c_adap[dev->def_i2c_bus];
retval = em28xx_i2c_eeprom(dev, &dev->eedata, &dev->eedata_len);
if ((retval < 0) && (retval != -ENODEV)) {
@@ -711,6 +711,6 @@
*/
int em28xx_i2c_unregister(struct em28xx *dev)
{
- i2c_del_adapter(&dev->i2c_adap);
+ i2c_del_adapter(&dev->i2c_adap[dev->def_i2c_bus]);
return 0;
}
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 1bef990..466b19d 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -280,11 +280,12 @@
static int em28xx_i2c_ir_handle_key(struct em28xx_IR *ir)
{
+ struct em28xx *dev = ir->dev;
static u32 ir_key;
int rc;
struct i2c_client client;
- client.adapter = &ir->dev->i2c_adap;
+ client.adapter = &ir->dev->i2c_adap[dev->def_i2c_bus];
client.addr = ir->i2c_dev_addr;
rc = ir->get_key_i2c(&client, &ir_key);
@@ -461,7 +462,7 @@
};
while (addr_list[i] != I2C_CLIENT_END) {
- if (i2c_probe_func_quick_read(&dev->i2c_adap, addr_list[i]) == 1)
+ if (i2c_probe_func_quick_read(&dev->i2c_adap[dev->def_i2c_bus], addr_list[i]) == 1)
return addr_list[i];
i++;
}
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 2d6d31a..5de7b6c 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -157,6 +157,9 @@
#define EM28XX_NUM_BUFS 5
#define EM28XX_DVB_NUM_BUFS 5
+/* max number of I2C buses on em28xx devices */
+#define NUM_I2C_BUSES 2
+
/* isoc transfers: number of packets for each buffer
windows requests only 64 packets .. so we better do the same
this is what I found out for all alternate numbers there!
@@ -507,10 +510,13 @@
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
int tda9887_conf;
+
/* i2c i/o */
- struct i2c_adapter i2c_adap;
- struct i2c_client i2c_client;
+ struct i2c_adapter i2c_adap[NUM_I2C_BUSES];
+ struct i2c_client i2c_client[NUM_I2C_BUSES];
unsigned char eeprom_addrwidth_16bit:1;
+ int def_i2c_bus; /* Default I2C bus */
+
/* video for linux */
int users; /* user count for exclusive use */
int streaming_users; /* Number of actively streaming users */