| /* |
| * Copyright (c) 2014 MundoReader S.L. |
| * Author: Heiko Stuebner <heiko@sntech.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <asm/div64.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/regmap.h> |
| #include "clk.h" |
| |
| #define PLL_MODE_MASK 0x3 |
| #define PLL_MODE_SLOW 0x0 |
| #define PLL_MODE_NORM 0x1 |
| #define PLL_MODE_DEEP 0x2 |
| |
| struct rockchip_clk_pll { |
| struct clk_hw hw; |
| |
| struct clk_mux pll_mux; |
| const struct clk_ops *pll_mux_ops; |
| |
| struct notifier_block clk_nb; |
| |
| void __iomem *reg_base; |
| int lock_offset; |
| unsigned int lock_shift; |
| enum rockchip_pll_type type; |
| u8 flags; |
| const struct rockchip_pll_rate_table *rate_table; |
| unsigned int rate_count; |
| spinlock_t *lock; |
| }; |
| |
| #define to_rockchip_clk_pll(_hw) container_of(_hw, struct rockchip_clk_pll, hw) |
| #define to_rockchip_clk_pll_nb(nb) \ |
| container_of(nb, struct rockchip_clk_pll, clk_nb) |
| |
| static const struct rockchip_pll_rate_table *rockchip_get_pll_settings( |
| struct rockchip_clk_pll *pll, unsigned long rate) |
| { |
| const struct rockchip_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| for (i = 0; i < pll->rate_count; i++) { |
| if (rate == rate_table[i].rate) |
| return &rate_table[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static long rockchip_pll_round_rate(struct clk_hw *hw, |
| unsigned long drate, unsigned long *prate) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| const struct rockchip_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| /* Assumming rate_table is in descending order */ |
| for (i = 0; i < pll->rate_count; i++) { |
| if (drate >= rate_table[i].rate) |
| return rate_table[i].rate; |
| } |
| |
| /* return minimum supported value */ |
| return rate_table[i - 1].rate; |
| } |
| |
| /* |
| * Wait for the pll to reach the locked state. |
| * The calling set_rate function is responsible for making sure the |
| * grf regmap is available. |
| */ |
| static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll) |
| { |
| struct regmap *grf = rockchip_clk_get_grf(); |
| unsigned int val; |
| int delay = 24000000, ret; |
| |
| while (delay > 0) { |
| ret = regmap_read(grf, pll->lock_offset, &val); |
| if (ret) { |
| pr_err("%s: failed to read pll lock status: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| if (val & BIT(pll->lock_shift)) |
| return 0; |
| delay--; |
| } |
| |
| pr_err("%s: timeout waiting for pll to lock\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * PLL used in RK3066, RK3188 and RK3288 |
| */ |
| |
| #define RK3066_PLL_RESET_DELAY(nr) ((nr * 500) / 24 + 1) |
| |
| #define RK3066_PLLCON(i) (i * 0x4) |
| #define RK3066_PLLCON0_OD_MASK 0xf |
| #define RK3066_PLLCON0_OD_SHIFT 0 |
| #define RK3066_PLLCON0_NR_MASK 0x3f |
| #define RK3066_PLLCON0_NR_SHIFT 8 |
| #define RK3066_PLLCON1_NF_MASK 0x1fff |
| #define RK3066_PLLCON1_NF_SHIFT 0 |
| #define RK3066_PLLCON2_BWADJ_MASK 0xfff |
| #define RK3066_PLLCON2_BWADJ_SHIFT 0 |
| #define RK3066_PLLCON3_RESET (1 << 5) |
| #define RK3066_PLLCON3_PWRDOWN (1 << 1) |
| #define RK3066_PLLCON3_BYPASS (1 << 0) |
| |
| static unsigned long rockchip_rk3066_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long prate) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| u64 nf, nr, no, rate64 = prate; |
| u32 pllcon; |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(3)); |
| if (pllcon & RK3066_PLLCON3_BYPASS) { |
| pr_debug("%s: pll %s is bypassed\n", __func__, |
| __clk_get_name(hw->clk)); |
| return prate; |
| } |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1)); |
| nf = (pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK; |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0)); |
| nr = (pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK; |
| no = (pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK; |
| |
| rate64 *= (nf + 1); |
| do_div(rate64, nr + 1); |
| do_div(rate64, no + 1); |
| |
| return (unsigned long)rate64; |
| } |
| |
| static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| const struct rockchip_pll_rate_table *rate; |
| unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate); |
| struct regmap *grf = rockchip_clk_get_grf(); |
| struct clk_mux *pll_mux = &pll->pll_mux; |
| const struct clk_ops *pll_mux_ops = pll->pll_mux_ops; |
| int rate_change_remuxed = 0; |
| int cur_parent; |
| int ret; |
| |
| if (IS_ERR(grf)) { |
| pr_debug("%s: grf regmap not available, aborting rate change\n", |
| __func__); |
| return PTR_ERR(grf); |
| } |
| |
| pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n", |
| __func__, __clk_get_name(hw->clk), old_rate, drate, prate); |
| |
| /* Get required rate settings from table */ |
| rate = rockchip_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, __clk_get_name(hw->clk)); |
| return -EINVAL; |
| } |
| |
| pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n", |
| __func__, rate->rate, rate->nr, rate->no, rate->nf); |
| |
| cur_parent = pll_mux_ops->get_parent(&pll_mux->hw); |
| if (cur_parent == PLL_MODE_NORM) { |
| pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW); |
| rate_change_remuxed = 1; |
| } |
| |
| /* enter reset mode */ |
| writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0), |
| pll->reg_base + RK3066_PLLCON(3)); |
| |
| /* update pll values */ |
| writel(HIWORD_UPDATE(rate->nr - 1, RK3066_PLLCON0_NR_MASK, |
| RK3066_PLLCON0_NR_SHIFT) | |
| HIWORD_UPDATE(rate->no - 1, RK3066_PLLCON0_OD_MASK, |
| RK3066_PLLCON0_OD_SHIFT), |
| pll->reg_base + RK3066_PLLCON(0)); |
| |
| writel_relaxed(HIWORD_UPDATE(rate->nf - 1, RK3066_PLLCON1_NF_MASK, |
| RK3066_PLLCON1_NF_SHIFT), |
| pll->reg_base + RK3066_PLLCON(1)); |
| writel_relaxed(HIWORD_UPDATE(rate->bwadj, RK3066_PLLCON2_BWADJ_MASK, |
| RK3066_PLLCON2_BWADJ_SHIFT), |
| pll->reg_base + RK3066_PLLCON(2)); |
| |
| /* leave reset and wait the reset_delay */ |
| writel(HIWORD_UPDATE(0, RK3066_PLLCON3_RESET, 0), |
| pll->reg_base + RK3066_PLLCON(3)); |
| udelay(RK3066_PLL_RESET_DELAY(rate->nr)); |
| |
| /* wait for the pll to lock */ |
| ret = rockchip_pll_wait_lock(pll); |
| if (ret) { |
| pr_warn("%s: pll did not lock, trying to restore old rate %lu\n", |
| __func__, old_rate); |
| rockchip_rk3066_pll_set_rate(hw, old_rate, prate); |
| } |
| |
| if (rate_change_remuxed) |
| pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM); |
| |
| return ret; |
| } |
| |
| static int rockchip_rk3066_pll_enable(struct clk_hw *hw) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| |
| writel(HIWORD_UPDATE(0, RK3066_PLLCON3_PWRDOWN, 0), |
| pll->reg_base + RK3066_PLLCON(3)); |
| |
| return 0; |
| } |
| |
| static void rockchip_rk3066_pll_disable(struct clk_hw *hw) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| |
| writel(HIWORD_UPDATE(RK3066_PLLCON3_PWRDOWN, |
| RK3066_PLLCON3_PWRDOWN, 0), |
| pll->reg_base + RK3066_PLLCON(3)); |
| } |
| |
| static int rockchip_rk3066_pll_is_enabled(struct clk_hw *hw) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| u32 pllcon = readl(pll->reg_base + RK3066_PLLCON(3)); |
| |
| return !(pllcon & RK3066_PLLCON3_PWRDOWN); |
| } |
| |
| static void rockchip_rk3066_pll_init(struct clk_hw *hw) |
| { |
| struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); |
| const struct rockchip_pll_rate_table *rate; |
| unsigned int nf, nr, no, bwadj; |
| unsigned long drate; |
| u32 pllcon; |
| |
| if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE)) |
| return; |
| |
| drate = __clk_get_rate(hw->clk); |
| rate = rockchip_get_pll_settings(pll, drate); |
| |
| /* when no rate setting for the current rate, rely on clk_set_rate */ |
| if (!rate) |
| return; |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0)); |
| nr = ((pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK) + 1; |
| no = ((pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK) + 1; |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1)); |
| nf = ((pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK) + 1; |
| |
| pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(2)); |
| bwadj = (pllcon >> RK3066_PLLCON2_BWADJ_SHIFT) & RK3066_PLLCON2_BWADJ_MASK; |
| |
| pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), bwadj(%d:%d)\n", |
| __func__, __clk_get_name(hw->clk), drate, rate->nr, nr, |
| rate->no, no, rate->nf, nf, rate->bwadj, bwadj); |
| if (rate->nr != nr || rate->no != no || rate->nf != nf |
| || rate->bwadj != bwadj) { |
| struct clk *parent = __clk_get_parent(hw->clk); |
| unsigned long prate; |
| |
| if (!parent) { |
| pr_warn("%s: parent of %s not available\n", |
| __func__, __clk_get_name(hw->clk)); |
| return; |
| } |
| |
| pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n", |
| __func__, __clk_get_name(hw->clk)); |
| prate = __clk_get_rate(parent); |
| rockchip_rk3066_pll_set_rate(hw, drate, prate); |
| } |
| } |
| |
| static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = { |
| .recalc_rate = rockchip_rk3066_pll_recalc_rate, |
| .enable = rockchip_rk3066_pll_enable, |
| .disable = rockchip_rk3066_pll_disable, |
| .is_enabled = rockchip_rk3066_pll_is_enabled, |
| }; |
| |
| static const struct clk_ops rockchip_rk3066_pll_clk_ops = { |
| .recalc_rate = rockchip_rk3066_pll_recalc_rate, |
| .round_rate = rockchip_pll_round_rate, |
| .set_rate = rockchip_rk3066_pll_set_rate, |
| .enable = rockchip_rk3066_pll_enable, |
| .disable = rockchip_rk3066_pll_disable, |
| .is_enabled = rockchip_rk3066_pll_is_enabled, |
| .init = rockchip_rk3066_pll_init, |
| }; |
| |
| /* |
| * Common registering of pll clocks |
| */ |
| |
| struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, |
| const char *name, const char **parent_names, u8 num_parents, |
| void __iomem *base, int con_offset, int grf_lock_offset, |
| int lock_shift, int mode_offset, int mode_shift, |
| struct rockchip_pll_rate_table *rate_table, |
| u8 clk_pll_flags, spinlock_t *lock) |
| { |
| const char *pll_parents[3]; |
| struct clk_init_data init; |
| struct rockchip_clk_pll *pll; |
| struct clk_mux *pll_mux; |
| struct clk *pll_clk, *mux_clk; |
| char pll_name[20]; |
| |
| if (num_parents != 2) { |
| pr_err("%s: needs two parent clocks\n", __func__); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* name the actual pll */ |
| snprintf(pll_name, sizeof(pll_name), "pll_%s", name); |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = pll_name; |
| |
| /* keep all plls untouched for now */ |
| init.flags = CLK_IGNORE_UNUSED; |
| |
| init.parent_names = &parent_names[0]; |
| init.num_parents = 1; |
| |
| if (rate_table) { |
| int len; |
| |
| /* find count of rates in rate_table */ |
| for (len = 0; rate_table[len].rate != 0; ) |
| len++; |
| |
| pll->rate_count = len; |
| pll->rate_table = kmemdup(rate_table, |
| pll->rate_count * |
| sizeof(struct rockchip_pll_rate_table), |
| GFP_KERNEL); |
| WARN(!pll->rate_table, |
| "%s: could not allocate rate table for %s\n", |
| __func__, name); |
| } |
| |
| switch (pll_type) { |
| case pll_rk3066: |
| if (!pll->rate_table) |
| init.ops = &rockchip_rk3066_pll_clk_norate_ops; |
| else |
| init.ops = &rockchip_rk3066_pll_clk_ops; |
| break; |
| default: |
| pr_warn("%s: Unknown pll type for pll clk %s\n", |
| __func__, name); |
| } |
| |
| pll->hw.init = &init; |
| pll->type = pll_type; |
| pll->reg_base = base + con_offset; |
| pll->lock_offset = grf_lock_offset; |
| pll->lock_shift = lock_shift; |
| pll->flags = clk_pll_flags; |
| pll->lock = lock; |
| |
| /* create the mux on top of the real pll */ |
| pll->pll_mux_ops = &clk_mux_ops; |
| pll_mux = &pll->pll_mux; |
| pll_mux->reg = base + mode_offset; |
| pll_mux->shift = mode_shift; |
| pll_mux->mask = PLL_MODE_MASK; |
| pll_mux->flags = 0; |
| pll_mux->lock = lock; |
| pll_mux->hw.init = &init; |
| |
| if (pll_type == pll_rk3066) |
| pll_mux->flags |= CLK_MUX_HIWORD_MASK; |
| |
| pll_clk = clk_register(NULL, &pll->hw); |
| if (IS_ERR(pll_clk)) { |
| pr_err("%s: failed to register pll clock %s : %ld\n", |
| __func__, name, PTR_ERR(pll_clk)); |
| mux_clk = pll_clk; |
| goto err_pll; |
| } |
| |
| /* the actual muxing is xin24m, pll-output, xin32k */ |
| pll_parents[0] = parent_names[0]; |
| pll_parents[1] = pll_name; |
| pll_parents[2] = parent_names[1]; |
| |
| init.name = name; |
| init.flags = CLK_SET_RATE_PARENT; |
| init.ops = pll->pll_mux_ops; |
| init.parent_names = pll_parents; |
| init.num_parents = ARRAY_SIZE(pll_parents); |
| |
| mux_clk = clk_register(NULL, &pll_mux->hw); |
| if (IS_ERR(mux_clk)) |
| goto err_mux; |
| |
| return mux_clk; |
| |
| err_mux: |
| clk_unregister(pll_clk); |
| err_pll: |
| kfree(pll); |
| return mux_clk; |
| } |