ata: libahci: Allow using multiple regulators
The current implementation of the libahci allows using multiple PHYs
but not multiple regulators. This patch adds the support of multiple
regulators. Until now it was mandatory to have a PHY under a subnode,
now a port subnode can contain either a regulator or a PHY (or both).
In order to be able to asociate a port with a regulator the port are
now a platform device in the device tree case.
There was only one driver which used directly the regulator field of
the ahci_host_priv structure. To preserve the bisectability the change
in the ahci_imx driver was done in the same patch.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 40f0e34..275358a 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -333,7 +333,7 @@
u32 em_msg_type; /* EM message type */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct regulator *target_pwr; /* Optional */
+ struct regulator **target_pwrs; /* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
* the PHY position in this array.
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 35d51c5..41632e5 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -221,11 +221,9 @@
if (imxpriv->no_device)
return 0;
- if (hpriv->target_pwr) {
- ret = regulator_enable(hpriv->target_pwr);
- if (ret)
- return ret;
- }
+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ return ret;
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0)
@@ -270,8 +268,7 @@
disable_clk:
clk_disable_unprepare(imxpriv->sata_ref_clk);
disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
return ret;
}
@@ -291,8 +288,7 @@
clk_disable_unprepare(imxpriv->sata_ref_clk);
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
}
static void ahci_imx_error_handler(struct ata_port *ap)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index a147aaa..73a0866 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -24,6 +24,7 @@
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -138,6 +139,59 @@
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
/**
+ * ahci_platform_enable_regulators - Enable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the regulators found in
+ * hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
+ * disables all the regulators already enabled in reverse order and
+ * returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
+{
+ int rc, i;
+
+ for (i = 0; i < hpriv->nports; i++) {
+ if (!hpriv->target_pwrs[i])
+ continue;
+
+ rc = regulator_enable(hpriv->target_pwrs[i]);
+ if (rc)
+ goto disable_target_pwrs;
+ }
+
+ return 0;
+
+disable_target_pwrs:
+ while (--i >= 0)
+ if (hpriv->target_pwrs[i])
+ regulator_disable(hpriv->target_pwrs[i]);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
+
+/**
+ * ahci_platform_disable_regulators - Disable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all regulators found in hpriv->target_pwrs.
+ */
+void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
+{
+ int i;
+
+ for (i = 0; i < hpriv->nports; i++) {
+ if (!hpriv->target_pwrs[i])
+ continue;
+ regulator_disable(hpriv->target_pwrs[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
+/**
* ahci_platform_enable_resources - Enable platform resources
* @hpriv: host private area to store config values
*
@@ -157,11 +211,9 @@
{
int rc;
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
+ rc = ahci_platform_enable_regulators(hpriv);
+ if (rc)
+ return rc;
rc = ahci_platform_enable_clks(hpriv);
if (rc)
@@ -177,8 +229,8 @@
ahci_platform_disable_clks(hpriv);
disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
+
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
@@ -199,8 +251,7 @@
ahci_platform_disable_clks(hpriv);
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
@@ -216,6 +267,68 @@
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
+ /*
+ * The regulators are tied to child node device and not to the
+ * SATA device itself. So we can't use devm for automatically
+ * releasing them. We have to do it manually here.
+ */
+ for (c = 0; c < hpriv->nports; c++)
+ if (hpriv->target_pwrs && hpriv->target_pwrs[c])
+ regulator_put(hpriv->target_pwrs[c]);
+
+}
+
+static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
+ struct device *dev, struct device_node *node)
+{
+ int rc;
+
+ hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
+
+ if (!IS_ERR(hpriv->phys[port]))
+ return 0;
+
+ rc = PTR_ERR(hpriv->phys[port]);
+ switch (rc) {
+ case -ENOSYS:
+ /* No PHY support. Check if PHY is required. */
+ if (of_find_property(node, "phys", NULL)) {
+ dev_err(dev,
+ "couldn't get PHY in node %s: ENOSYS\n",
+ node->name);
+ break;
+ }
+ case -ENODEV:
+ /* continue normally */
+ hpriv->phys[port] = NULL;
+ rc = 0;
+ break;
+
+ default:
+ dev_err(dev,
+ "couldn't get PHY in node %s: %d\n",
+ node->name, rc);
+
+ break;
+ }
+
+ return rc;
+}
+
+static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
+ struct device *dev)
+{
+ struct regulator *target_pwr;
+ int rc = 0;
+
+ target_pwr = regulator_get_optional(dev, "target");
+
+ if (!IS_ERR(target_pwr))
+ hpriv->target_pwrs[port] = target_pwr;
+ else
+ rc = PTR_ERR(target_pwr);
+
+ return rc;
}
/**
@@ -240,7 +353,7 @@
struct ahci_host_priv *hpriv;
struct clk *clk;
struct device_node *child;
- int i, enabled_ports = 0, rc = -ENOMEM;
+ int i, sz, enabled_ports = 0, rc = -ENOMEM, child_nodes;
u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
@@ -261,14 +374,6 @@
goto err_out;
}
- hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
- if (IS_ERR(hpriv->target_pwr)) {
- rc = PTR_ERR(hpriv->target_pwr);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- hpriv->target_pwr = NULL;
- }
-
for (i = 0; i < AHCI_MAX_CLKS; i++) {
/*
* For now we must use clk_get(dev, NULL) for the first clock,
@@ -290,19 +395,33 @@
hpriv->clks[i] = clk;
}
- hpriv->nports = of_get_child_count(dev->of_node);
+ hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
- if (hpriv->nports) {
- hpriv->phys = devm_kzalloc(dev,
- hpriv->nports * sizeof(*hpriv->phys),
- GFP_KERNEL);
- if (!hpriv->phys) {
- rc = -ENOMEM;
- goto err_out;
- }
+ /*
+ * If no sub-node was found, we still need to set nports to
+ * one in order to be able to use the
+ * ahci_platform_[en|dis]able_[phys|regulators] functions.
+ */
+ if (!child_nodes)
+ hpriv->nports = 1;
+ sz = hpriv->nports * sizeof(*hpriv->phys);
+ hpriv->phys = devm_kzalloc(dev, sz, GFP_KERNEL);
+ if (!hpriv->phys) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ sz = hpriv->nports * sizeof(*hpriv->target_pwrs);
+ hpriv->target_pwrs = devm_kzalloc(dev, sz, GFP_KERNEL);
+ if (!hpriv->target_pwrs) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ if (child_nodes) {
for_each_child_of_node(dev->of_node, child) {
u32 port;
+ struct platform_device *port_dev;
if (!of_device_is_available(child))
continue;
@@ -316,18 +435,23 @@
dev_warn(dev, "invalid port number %d\n", port);
continue;
}
-
mask_port_map |= BIT(port);
- hpriv->phys[port] = devm_of_phy_get(dev, child, NULL);
- if (IS_ERR(hpriv->phys[port])) {
- rc = PTR_ERR(hpriv->phys[port]);
- dev_err(dev,
- "couldn't get PHY in node %s: %d\n",
- child->name, rc);
- goto err_out;
+ of_platform_device_create(child, NULL, NULL);
+
+ port_dev = of_find_device_by_node(child);
+
+ if (port_dev) {
+ rc = ahci_platform_get_regulator(hpriv, port,
+ &port_dev->dev);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
}
+ rc = ahci_platform_get_phy(hpriv, port, dev, child);
+ if (rc)
+ goto err_out;
+
enabled_ports++;
}
if (!enabled_ports) {
@@ -343,38 +467,14 @@
* If no sub-node was found, keep this for device tree
* compatibility
*/
- struct phy *phy = devm_phy_get(dev, "sata-phy");
- if (!IS_ERR(phy)) {
- hpriv->phys = devm_kzalloc(dev, sizeof(*hpriv->phys),
- GFP_KERNEL);
- if (!hpriv->phys) {
- rc = -ENOMEM;
- goto err_out;
- }
+ rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
+ if (rc)
+ goto err_out;
- hpriv->phys[0] = phy;
- hpriv->nports = 1;
- } else {
- rc = PTR_ERR(phy);
- switch (rc) {
- case -ENOSYS:
- /* No PHY support. Check if PHY is required. */
- if (of_find_property(dev->of_node, "phys", NULL)) {
- dev_err(dev, "couldn't get sata-phy: ENOSYS\n");
- goto err_out;
- }
- case -ENODEV:
- /* continue normally */
- hpriv->phys = NULL;
- break;
-
- default:
- goto err_out;
-
- }
- }
+ rc = ahci_platform_get_regulator(hpriv, 0, dev);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
}
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
hpriv->got_runtime_pm = true;