libata: Merge branch 'for-3.13-fixes' into for-3.14
Pulling in for-3.13-fixes for the ahci_imx fix as further changes
depend on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c55e005..ef8642e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -437,6 +437,8 @@
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
.driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
+ .driver_data = board_ahci_yes_fbs },
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index ae2d73f..3e23e99 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -113,7 +113,7 @@
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
- * is 0x07fffffd, and the other one write for setting
+ * is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index f955431..4b231ba 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -329,6 +329,7 @@
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
+ { .compatible = "ibm,476gtr-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 81a94a3..dae73ef 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4156,6 +4156,9 @@
{ "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
+ /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
@@ -6304,10 +6307,9 @@
for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
ata_tlink_delete(&ap->pmp_link[i]);
}
- ata_tport_delete(ap);
-
/* remove the associated SCSI host */
scsi_remove_host(ap->scsi_host);
+ ata_tport_delete(ap);
}
/**
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 68f9e32..88949c6 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -88,15 +88,13 @@
static bool odd_can_poweroff(struct ata_device *ata_dev)
{
acpi_handle handle;
- acpi_status status;
struct acpi_device *acpi_dev;
handle = ata_dev_acpi_handle(ata_dev);
if (!handle)
return false;
- status = acpi_bus_get_device(handle, &acpi_dev);
- if (ACPI_FAILURE(status))
+ if (acpi_bus_get_device(handle, &acpi_dev))
return false;
return acpi_device_can_poweroff(acpi_dev);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e88690e..73492dd 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -319,6 +319,7 @@
ret = clk_set_rate(acdev->clk, 166000000);
if (ret) {
dev_warn(acdev->host->dev, "clock set rate failed");
+ clk_disable_unprepare(acdev->clk);
return ret;
}