| /* |
| * T1024 RDB Device Tree Source |
| * |
| * Copyright 2014 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /include/ "fsl/t102xsi-pre.dtsi" |
| |
| / { |
| model = "fsl,T1024RDB"; |
| compatible = "fsl,T1024RDB"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| ifc: localbus@ffe124000 { |
| reg = <0xf 0xfe124000 0 0x2000>; |
| ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 2 0 0xf 0xff800000 0x00010000 |
| 3 0 0xf 0xffdf0000 0x00008000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| nand@1,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc-nand"; |
| reg = <0x2 0x0 0x10000>; |
| }; |
| |
| board-control@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,t1024-cpld"; |
| reg = <3 0 0x300>; |
| ranges = <0 3 0 0x300>; |
| bank-width = <1>; |
| device-width = <1>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| dcsr: dcsr@f00000000 { |
| ranges = <0x00000000 0xf 0x00000000 0x01072000>; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| spi@110000 { |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q512ax3"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; /* input clk */ |
| }; |
| |
| slic@1 { |
| compatible = "maxim,ds26522"; |
| reg = <1>; |
| spi-max-frequency = <2000000>; |
| }; |
| |
| slic@2 { |
| compatible = "maxim,ds26522"; |
| reg = <2>; |
| spi-max-frequency = <2000000>; |
| }; |
| }; |
| |
| i2c@118000 { |
| adt7461@4c { |
| /* Thermal Monitor */ |
| compatible = "adi,adt7461"; |
| reg = <0x4c>; |
| }; |
| |
| current-sensor@40 { |
| compatible = "ti,ina220"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c256"; |
| reg = <0x50>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| interrupts = <0x1 0x1 0 0>; |
| }; |
| }; |
| |
| i2c@118100 { |
| pca9546@77 { |
| compatible = "nxp,pca9546"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| }; |
| |
| pci0: pcie@ffe240000 { |
| reg = <0xf 0xfe240000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe250000 { |
| reg = <0xf 0xfe250000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci2: pcie@ffe260000 { |
| reg = <0xf 0xfe260000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| }; |
| |
| /include/ "fsl/t1024si-post.dtsi" |