Merge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 332bd32..8f0d37d 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -52,7 +52,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
-#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
@@ -278,7 +277,7 @@
#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
[0] = {
.width = LCD_XRES,
.height = LCD_YRES,
@@ -311,7 +310,7 @@
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
.displays = jive_vgg2432a4_display,
.num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
.default_display = 0,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b05d56e..9c6abf9 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -243,7 +243,7 @@
/* IDE channels */
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
.ioport_shift = 5,
};
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 41a00f5..c8a4668 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -413,7 +413,6 @@
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
- .init_machine = osiris_init,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 25f7935..7f473e4 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -166,6 +166,10 @@
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 7642b97..08044de 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -13,6 +13,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -38,6 +39,7 @@
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
@@ -56,6 +58,7 @@
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_setpull);
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 6b1b523..26f0cec 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,6 +34,7 @@
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767..91adfa7 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -100,7 +100,7 @@
readl(adc->regs + S3C2410_ADCDLY));
}
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
@@ -190,6 +190,23 @@
void s3c_adc_release(struct s3c_adc_client *client)
{
/* We should really check that nothing is in progress. */
+ if (adc_dev->cur == client)
+ adc_dev->cur = NULL;
+ if (adc_dev->ts_pend == client)
+ adc_dev->ts_pend = NULL;
+ else {
+ struct list_head *p, *n;
+ struct s3c_adc_client *tmp;
+
+ list_for_each_safe(p, n, &adc_pending) {
+ tmp = list_entry(p, struct s3c_adc_client, pend);
+ if (tmp == client)
+ list_del(&tmp->pend);
+ }
+ }
+
+ if (adc_dev->cur == NULL)
+ s3c_adc_try(adc_dev);
kfree(client);
}
EXPORT_SYMBOL_GPL(s3c_adc_release);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 94a341a..5c0491b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>