[PATCH] libata-eh: Remove layering violation and duplication when handling absent ports
This removes the layering violation where drivers have to fiddle
directly with EH flags. Instead we now recognize -ENOENT means "no port"
and do the handling in the core code.
This also removes an instance of a call to disable the port, and an
identical printk from each driver doing this. Even better - future rule
changes will be in one place only.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ffa111e..5719704 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -643,11 +643,9 @@
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
- ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 3fa80f0..02b2b27 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1515,7 +1515,11 @@
if (prereset) {
rc = prereset(ap);
if (rc) {
- ata_port_printk(ap, KERN_ERR,
+ if (rc == -ENOENT) {
+ ata_port_printk(ap, KERN_DEBUG, "port disabled. ignoring.\n");
+ ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
+ } else
+ ata_port_printk(ap, KERN_ERR,
"prereset failed (errno=%d)\n", rc);
return rc;
}
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 3293cf9..793a5e1 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
/**
* timing_setup - shared timing computation and load
@@ -137,11 +137,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 ata66;
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+ return -ENOENT;
pci_read_config_byte(pdev, 0x42, &ata66);
if (ata66 & bitmask[ap->port_no])
@@ -167,11 +164,9 @@
{ 0x40, 1, 0x01, 0x01 }
};
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+ return -ENOENT;
+
/* No host side cable detection */
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
@@ -262,12 +257,8 @@
u8 ata66;
u16 udma;
- if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
-
+ if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
+ return -ENOENT;
pci_read_config_byte(pdev, 0x52, &ata66);
if (ata66 & bitmask[ap->port_no])
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d6ef3bf..0f3b491 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.2"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -47,11 +47,9 @@
{ 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -90,11 +88,9 @@
u8 tmp;
/* Odd numbered device ids are the units with enable bits (the -R cards) */
- if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+ return -ENOENT;
+
pci_read_config_byte(pdev, 0x49, &tmp);
if (tmp & (1 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 3f78a1e..060d019 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
enum {
ATIIXP_IDE_PIO_TIMING = 0x40,
@@ -41,11 +41,9 @@
{ 0x48, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index c30bc18..9281382 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.2"
/**
* efar_pre_reset - check for 40/80 pin
@@ -42,11 +42,9 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 tmp;
- if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
+ return -ENOENT;
+
pci_read_config_byte(pdev, 0x47, &tmp);
if (tmp & (2 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 6832a64..3bdb6f2 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -51,7 +51,7 @@
/* Check if our port is enabled */
pci_read_config_dword(pdev, 0x40, &control);
if ((control & port_mask) == 0)
- return 0;
+ return -ENOENT;
/* There are two basic mappings. One has the two SATA ports merged
as master/slave and the secondary as PATA, the other has only the
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1958c4e..3c65393 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -18,7 +18,7 @@
* The driver conciously keeps this logic internally to avoid pushing quirky
* PATA history into the clean libata layer.
*
- * Thinkpad specific note: If you boot an MPIIX using thinkpad with a PCMCIA
+ * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
* hard disk present this driver will not detect it. This is not a bug. In this
* configuration the secondary port of the MPIIX is disabled and the addresses
* are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.1"
+#define DRV_VERSION "0.7.2"
enum {
IDETIM = 0x6C, /* IDE control register */
@@ -54,11 +54,8 @@
{ 0x6F, 1, 0x80, 0x80 }
};
- if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 93d6646..f529fe4 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -45,11 +45,8 @@
{ 0x47, 1, 0x08, 0x08 }
};
- if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 04c618a..31a285c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_oldpiix"
-#define DRV_VERSION "0.5.1"
+#define DRV_VERSION "0.5.2"
/**
* oldpiix_pre_reset - probe begin
@@ -42,11 +42,8 @@
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c3d0132..136d7a6 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.5"
enum {
READ_REG = 0, /* index of Read cycle timing register */
@@ -59,11 +59,9 @@
{ 0x40, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 177a455..18ec8e7 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
enum {
READ_REG = 0, /* index of Read cycle timing register */
@@ -59,11 +59,9 @@
0x40, 1, 0x08, 0x00
};
- if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 31ab9c8..bd4ed67 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -36,7 +36,7 @@
#include <asm/io.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.74-ac3"
+#define DRV_VERSION "0.74-ac5"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
@@ -311,10 +311,8 @@
static int pdc2027x_prereset(struct ata_port *ap)
{
/* Check whether port enabled */
- if (!pdc2027x_port_enabled(ap)) {
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pdc2027x_port_enabled(ap))
+ return -ENOENT;
pdc2027x_cbl_detect(ap);
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 2e555168..fce74d9 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -34,7 +34,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_sis"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
struct sis_chipset {
u16 device; /* PCI host ID */
@@ -74,11 +74,9 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u16 tmp;
- if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
+ return -ENOENT;
+
/* The top bit of this register is the cable detect bit */
pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
if (tmp & 0x8000)
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index f849978..b3bc607 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -19,7 +19,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
enum {
/*
@@ -49,11 +49,8 @@
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n");
- return 0;
- }
+ if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 36f7887..95adf92 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -46,13 +46,13 @@
#define DRV_VERSION "0.2.5"
/**
- * triflex_probe_init - probe begin
+ * triflex_prereset - probe begin
* @ap: ATA port
*
* Set up cable type and use generic probe init
*/
-static int triflex_probe_init(struct ata_port *ap)
+static int triflex_prereset(struct ata_port *ap)
{
static const struct pci_bits triflex_enable_bits[] = {
{ 0x80, 1, 0x01, 0x01 },
@@ -61,11 +61,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -74,7 +71,7 @@
static void triflex_error_handler(struct ata_port *ap)
{
- ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset);
+ ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 1b2ff13..0e8b130 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -60,7 +60,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.1.13"
+#define DRV_VERSION "0.1.14"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -155,11 +155,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
+ return -ENOENT;
}
if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)